畅销书下载

AASHTO 美国国家公路与运输协会标准文献中英文对照目录 共一页

AASHTO 文献包括规范、临时标准、标准测试方法、推荐方案、指导性规格、手册、桥梁焊接规程、年度会议程序、会员人事和委员会参考手册 (Reference Book of Member Department Personnel & Committees)、美国公路编码以及州际研究

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

AASHTO 511NPR-1-2003 511国家的进度报告 511 National Progress Report
AASHTO ALFD-2-1991 指南的规格，候补委员，负荷因子设计的程序，钢梁桥使用支撑紧凑路段修订的百分之临时规格-桥梁- 19 94年 Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections-Revised per Interim Specifications - Bridges - 1994
AASHTO AM-2-1997 21世纪资产管理 21st Century Asset Management
AASHTO AMPE-1-2000 资产管理同侪交流- （ 1999年车间） Asset Management Peer Exchange-(1999 Workshop)
AASHTO APD-1-2005 加快项目交付。其约时间 Accelerating project delivery. Its about time
AASHTO APH-1-2005 合作伙伴手册 Partnering Handbook
AASHTO APPENDICES-2002 附录标准规格为公路桥梁2002年第十七版 Appendices to Standard Specifications for Highway Bridges 2002-17th Edition
AASHTO ATSJ-1-2003 安全之旅 the safety journey
AASHTO AU-5-2005 一政策对住宿的水电费与高速公路右侧的双向 A Policy On the Accommodation of Utilities Within Freeway Right-Of-Way
AASHTO BLR-2002 运输;投资在美国;底线 Transportation; Invest in America; The Bottom Line
AASHTO BPCSS-2006 aashto中心环境方面的杰出表现-最佳做法，在上下文敏感的解决方案 AASHTO Center for Environmental Excellence - Best Practices in Context-Sensitive Solutions
AASHTO BPEP-1-2000 最佳做法在环境合作伙伴关系：提高大律师公会aashto案例研究 Best Practices in Environmental Partnering: Raising the Bar AASHTO CASE STUDIES
AASHTO BRH-2-1995 小组委员会就新的公路材料专责小组13日的报告为指导，以规范公路屏障硬件 Subcommittee on New Highway Materials Task Force 13 Report a Guide to Standardized Highway Barrier Hardware
AASHTO BWC-4-2002 桥梁焊接代号为AWS的d1.5m/d1.5 ;临时2003 ; 2005年中期 Bridge Welding Code-AWS D1.5M/D1.5; Interim 2003; Interim 2005
AASHTO CA-3-2006 通勤在美国三-第三次国家报告对通勤的格局和趋势 Commuting In America III - The Third National Report On Commuting Patterns and Trends
AASHTO CHBTW-1995 施工手册桥临时工程 Construction Handbook for Bridge Temporary Works
AASHTO CLFS-2003 行政总裁论坛的领导，国家有关部门的运输;国家的战略举措;同伴向本次论坛的总结报告 CEO Leadership Forum for State Departments of Transportation; State Strategic Initiatives; A Companion to the Forum Summary Report
AASHTO CM-4-1990 施工手册公路建设-第四版 Construction Manual for Highway Construction-Fourth Edition
AASHTO COMMENTARIES-2002 评标准规格为公路桥梁2002年第十七版 Commentaries to Standard Specifications for Highway Bridges 2002-17th Edition
AASHTO CORE-1997 普遍公认的（核心）的结构要素- 2002年的中期调整 Commonly Recognized (CoRe) Structural Elements-2002 Interim Revision
AASHTO CSD-1-1998 不断变化的状态点 The Changing State DOT
AASHTO CSS-1-2005 中心环境方面的杰出表现最佳做法，在上下文敏感的解决方案 Center for Environmental Excellence Best Practices in Context-Sensitive Solutions
AASHTO DDPG-1-2003 设计图纸介绍指引 Design Drawing Presentation Guidelines
AASHTO DIVISION I 3.3-N/A 静载 Dead Load
AASHTO DIVISION I 5.13-1996 极限状态，负载因素和阻力因素， 1997年中期 Limit States, Load Factors and Resistance Factors-Interim 1997
AASHTO DIVISION I 5.14-1996 重力及半重力墙的设计，和悬臂墙设计-中期1997年 Gravity and Semi-Gravity Wall Design, and Cantilever Wall Design-Interim 1997
AASHTO DIVISION I 13.1-N/A 一般和批注 General and Notations
AASHTO DIVISION II 11.7-N/A 计量与支付 Measurement and Payment
AASHTO DIVISION II 29.7-N/A 付款 Payment
AASHTO DS-2005 一项政策的设计标准号州际公路系统5版 A POLICY ON DESIGN STANDARDS INTERSTATE SYSTEM-Edition 5
AASHTO EAST-1991 报告对1990年的欧洲沥青考察 Report on the 1990 European Asphalt Study Tour
AASHTO EMCP-1992 评价和维修混凝土路面 Evaluation and Maintenance of Concrete Pavements
AASHTO EMS-1-2004 实施环境管理体系的简便手册的人数一-决策的情况一环境管理体系 EMS Implementation Handy Guide Number One - Making the Case for an Environmental Management System
AASHTO EMS-2-2004 实施环境管理体系的简便手册人数2 -环境管理体系，桥梁，组织协调和通讯 EMS Implementation Handy Guide Number Two - EMS, A Bridge for Organizational Coordination and Communications
AASHTO EMSO-2005 aashto中心环境方面的杰出表现-使用一环境管理体系，以满足交通运输的挑战和机遇-实施指南 AASHTO Center for Environmental Excellence - Using an Environmental Management System to Meet Transportation Challenges and Opportunities - An Implementation Guide
AASHTO ESC-2004 aashto中心环境方面的杰出表现-最佳做法，在竞争的环境管理 AASHTO Center for Environmental Excellence - Best Practices in Environmental Stewardship Competition
AASHTO FCAH-3-1990 信息指南剑击控制进入高速公路 Informational Guide on Fencing Controlled Access Highways
AASHTO FHD-1-2004 指南实现的灵活性，在公路设计 A Guide to Achieving Flexibility in Highway Design
AASHTO FIM-2-1978 手册的基础调查 Manual on Foundation Investigations
AASHTO FRBL-1-2002 交通运输投资在美国-货运铁路的底线报告 Transportation Invest in America - Freight-Rail Bottom Line Report
AASHTO GAU-4-2005 指南容纳公用事业公路右侧的双向 A Guide for Accommodating Utilities Within Highway Right-Of-Way
AASHTO GBF-3-1999 指南的发展，自行车的设施 Guide for the Development of Bicycle Facilities
AASHTO MM-3-1999 维修手册：维修和管理的道路和桥梁 Maintenance Manual: The Maintenance and Management of Roadways and Bridges
AASHTO GBMS-1-1993 指引桥梁管理系统 Guidelines for Bridge Management Systems
AASHTO GCPE-1996 指南订约，选拔，管理顾问公司在前期工程 Guide for Contracting, Selecting, and Managing Consultants in Preconstruction Engineering
AASHTO GD-2-1965 政策上的几何设计的农村公路-撤回所取代aashto老人科日间医院 A Policy on Geometric Design of Rural Highways-Withdrawn Replaced by AASHTO GDHS
AASHTO GDC-1-2003 准则设计constructibility -a ashto/ n sba钢桥协作-克1 2.1-2003 Guidelines for Design for Constructibility - AASHTO/NSBA Steel Bridge Collaboration-G 12.1-2003
AASHTO GDHS-5-2004 政策的几何设计的公路和街道-第五版 Policy on Geometric Design of Highways and Streets-Fifth Edition
AASHTO GDPS-3 V2-1986 指南设计路面结构第2卷-补充-1 998年 Guide for Design of Pavement Structures Volume 2-Supplement - 1998
AASHTO GDPS-4-1993 指南设计路面结构 Guide for Design of Pavement Structures
AASHTO GHC-4-2003 aashto指南规格横向弧形钢梁公路桥梁-与设计的例子，因为我梁和箱梁桥-勘误表： 1 0/2003 AASHTO Guide Specification for Horizontally Curved Steel Girder Highway Bridges - With Design Examples for I-Girder and Box-Girder Bridges-Errata: 10/2003
AASHTO GHOV-3-2004 指南高承载车辆（ HOV ）设施 Guide for High-Occupancy Vehicle (HOV) Facilities
AASHTO GL-6-2005 巷道照明设计指南 Roadway Lighting Design Guide
AASHTO GMPC-2-2002 指导方法和程序，在合同维修 Guide for Methods and Procedures in Contract Maintenance
AASHTO PMG-1-2001 路面管理指南 Pavement Management Guide
AASHTO GPF-2004 指导规划，设计，运作和行人设施 Guide for the Planning, Design, and Operation of Pedestrian Facilities
AASHTO GPRF-2-2004 指南停泊及转乘设施 Guide for Park-and-Ride Facilities
AASHTO GPSS-1-1997 指南绘画钢结构 Guide for Painting Steel Structures
AASHTO GSAHB-1991 指南规格铝公路桥梁修订的百分之临时规格-桥梁- 20 00年 Guide Specifications for Aluminum Highway Bridges-Revised per Interim Specifications - Bridges - 2000
AASHTO GSBTW-1995 指南设计规格为桥临时工程 Guide Design Specifications for Bridge Temporary Works
AASHTO GSCB-2-1999 指南规格的设计与施工段混凝土桥梁的第二版;临时2003年 Guide Specifications for Design and Construction of Segmental Concrete Bridges-Second Edition; Interim 2003
AASHTO GSCBS-1989 指南规格的热效应在混凝土桥梁上层建筑 Guide Specifications Thermal Effects in Concrete Bridge Superstructures
AASHTO GSDL-1994 指南的规格，分布载荷为公路桥梁 Guide Specifications for Distribution of Loads for Highway Bridges
AASHTO GSDPB-1997 指南设计规范行人天桥 Guide Specifications for Design of Pedestrian Bridges
AASHTO GSEC-1989 指南的规格，强度评价现有的钢和混凝土桥梁 Guide Specifications for Strength Evaluation of Existing Steel and Concrete Bridges
AASHTO GSGLC-4-2001 第一部分：指引，供选择的补充，引导标志，交通发电机毗邻高速公路第二部分：准则机场指南签署第三部分：清单控制城市使用在引导标志，州际公路 Part I: Guidelines for the Selection of Supplemental Guide Signs for Traffic Generators Adjacent to Freeways Part II: Guidelines for Airport Guide Signing Part III: List of Control Cities for Use in Guide Signs on Interstate Highways
AASHTO GSH-8-1998 指南规格的公路建设-第八版 Guide Specifications for Highway Construction-Eighth Edition
AASHTO GSHDP-1-1999 专责小组13日的报告指南，以规范公路排水产品 Task Force 13 Report Guide to Standardized Highway Drainage Products
AASHTO GSIC-1-1999 指南雪和冰的控制 Guide for Snow and Ice Control
AASHTO GSID-2000 指南规格隔震设计第二版;订正％临时规格-桥梁- 20 00年 Guide Specifications for Seismic Isolation Design-Second Edition; Revised per Interim Specifications - Bridges - 2000
AASHTO GSRWT-1-1997 指导意见分享高速公路和公路权利的双向通讯 Guidance on Sharing Freeway and Highway Rights-Of-Way for Telecommunications
AASHTO GSSB-1989 指南的规格，结构设计的隔音屏障-临时规格： 1992年， 2002年 Guide Specifications for Structural Design of Sound Barriers-Interim Specifications: 1992, 2002
AASHTO GSW-4-2001 指南车的重量和尺寸出版的2004年4月22日 Guide for Vehicle Weights and Dimensions-Published 04/22/2004
AASHTO GTN-3-1993 指南评价和消减交通噪音 Guide on Evaluation and Abatement of Traffic Noise
AASHTO HB-17-2002 标准规格为公路桥梁-第十七版;勘误表2003分之01 ;勘误表： 03/2005 Standard Specifications for Highway Bridges-17th Edition; Errata 01/2003; Errata: 03/2005
AASHTO HB-17 DIVISION I-2002 设计 Design
AASHTO HB-17 DIVISION I-A-2002 抗震设计 Seismic Design
AASHTO HB-17 DIVISION I-A SEC 1-2002 司的I -一抗震设计-引言 Division I-A Seismic Design - Introduction
AASHTO HB-17 DIVISION I-A SEC 2-2002 保险业监督司的抗震设计-符号和定义 Division I-A Seismic Design - Symbols and Definitions
AASHTO HB-17 DIVISION I-A SEC 3-2002 保险业监督司的抗震设计-一般要求 Division I-A Seismic Design - General Requirements
AASHTO HB-17 DIVISION I-A SEC 4-2002 保险业监督司的抗震设计-分析的要求 Division I-A Seismic Design - Analysis Requirements
AASHTO HB-17 DIVISION I-A SEC 5-2002 保险业监督司的抗震设计-设计的要求，在桥梁抗震性能的A类 Division I-A Seismic Design - Design Requirements for Bridges in Seismic Performance Category A
AASHTO HB-17 DIVISION I-A SEC 6-2002 保险业监督司的抗震设计-设计的要求，在桥梁的抗震性能B类 Division I-A Seismic Design - Design Requirements for Bridges in Seismic Performance Category B
AASHTO HB-17 DIVISION I-A SEC 7-2002 保险业监督司的抗震设计-设计的要求，在桥梁的抗震性能类别C和D -勘误表2 003分之01 Division I-A Seismic Design - Design Requirements for Bridges in Seismic Performance Categories C and D-Errata 01/2003
AASHTO HB-17 DIVISION I SEC 1-2002 司i设计-一般规定 Division I Design - General Provisions
AASHTO HB-17 DIVISION I SEC 2-2002 司i设计-一般的特点设计 Division I Design - General Features of Design
AASHTO HB-17 DIVISION I SEC 3-2002 司i设计-荷载- （ A部分， B部分， C部分） ;勘误表2 003分之01 Division I Design - Loads-(Part A, Part B, and Part C); Errata 01/2003
AASHTO HB-17 DIVISION I SEC 4-2002 司i设计-基金会（ A部分， B部分， C部分） ;勘误表2 003分之01 Division I Design - Foundations-(Part A, Part B, and Part C); Errata 01/2003
AASHTO HB-17 DIVISION I SEC 5-2002 司i设计-挡土墙- （ A部分， B部分， C部分） ;勘误表2 003分之01 Division I Design - Retaining Walls-(Part A, Part B, and Part C); Errata 01/2003
AASHTO HB-17 DIVISION I SEC 6-2002 司i设计-涵洞 Division I Design - Culverts
AASHTO HB-17 DIVISION I SEC 7-2002 司i设计-子- （ A部分， B部分， C部分） Division I Design - Substructures-(Part A, Part B, and Part C)
AASHTO HB-17 DIVISION I SEC 8-2002 司i设计-钢筋混凝土- （ A部分， B部分， C部分， D部分） Division I Design - Reinforced Concrete-(Part A, Part B, Part C, and Part D)
AASHTO HB-17 DIVISION I SEC 9-2002 司i设计-预应力混凝土（ A部分， B部分， C部分， D部分） Division I Design - Prestressed Concrete-(Part A, Part B, Part C, and Part D)
AASHTO HB-17 DIVISION I SEC 10-2002 司i设计-结构钢（ A部分， B部分， C部分， D部分） ;勘误表2 003分之01 Division I Design - Structural Steel-(Part A, Part B, Part C, and Part D); Errata 01/2003
AASHTO HB-17 DIVISION I SEC 11-2002 司i设计-铝设计 Division I Design - Aluminum Design
AASHTO HB-17 DIVISION I SEC 12-2002 司i设计-土壤-波纹金属结构的互动系统-勘误表2 0 03分之01 Division I Design - Soil-Corrugated Metal Structure Interaction Systems-Errata 01/2003
AASHTO HB-17 DIVISION I SEC 13-2002 司i设计-木结构 Division I Design - Wood Structures
AASHTO HB-17 DIVISION I SEC 14-2002 司i设计-轴承-勘误表2 003分之01 Division I Design - Bearings-Errata 01/2003
AASHTO HB-17 DIVISION I SEC 15-2002 司i设计-钢隧道的内衬板 Division I Design - Steel Tunnel Liner Plates
AASHTO HB-17 DIVISION I SEC 16-2002 司i设计-土壤-钢筋混凝土结构的互动系统 Division I Design - Soil-Reinforced Concrete Structure Interaction Systems
AASHTO HB-17 DIVISION I SEC 17-2002 司i设计-土壤-热塑性管道的互动系统 Division I Design - Soil-Thermoplastic Pipe Interaction Systems
AASHTO HB-17 DIVISION II-2002 建设 Construction
AASHTO HB-17 DIVISION II SEC 1-2002 司第二建筑-结构的挖掘和回填 Division II Construction - Structure Excavation and Backfill
AASHTO HB-17 DIVISION II SEC 2-2002 司第二建设-拆除现有的结构 Division II Construction - Removal of Existing Structures
AASHTO HB-17 DIVISION II SEC 3-2002 司第二建筑-临时工程 Division II Construction - Temporary Works
AASHTO HB-17 DIVISION II SEC 4-2002 司第二建筑-驱动的基桩 Division II Construction - Driven Foundation Piles
AASHTO HB-17 DIVISION II SEC 5-2002 司第二建筑-挖孔桩和竖井 Division II Construction - Drilled Piles and Shafts
AASHTO HB-17 DIVISION II SEC 6-2002 司第二建筑-地面主播-勘误表2 003分之01 Division II Construction - Ground Anchors-Errata 01/2003
AASHTO HB-17 DIVISION II SEC 7-2002 司第二建筑-土挡土系统 Division II Construction - Earth Retaining Systems
AASHTO HB-17 DIVISION II SEC 8-2002 司第二建筑-混凝土结构 Division II Construction - Concrete Structures
AASHTO HB-17 DIVISION II SEC 9-2002 司第二建筑-钢筋 Division II Construction - Reinforcing Steel
AASHTO HB-17 DIVISION II SEC 10-2002 司第二建筑-预应力-勘误表2 003分之01 Division II Construction - Prestressing-Errata 01/2003
AASHTO HB-17 DIVISION II SEC 11-2002 司第二建筑-钢结构-勘误表2 003分之01 Division II Construction - Steel Structures-Errata 01/2003
AASHTO HB-17 DIVISION II SEC 12-2002 司第二建设-钢网格地板 Division II Construction - Steel Grid Flooring
AASHTO HB-17 DIVISION II SEC 13-2002 司第二建设-油漆 Division II Construction - Painting
AASHTO HB-17 DIVISION II SEC 14-2002 司第二建筑-砌石 Division II Construction - Stone Masonry
AASHTO HB-17 DIVISION II SEC 15-2002 司第二建筑-混凝土砌块和砖混 Division II Construction - Concrete Block and Brick Masonry
AASHTO HB-17 DIVISION II SEC 16-2002 司第二建筑-木结构 Division II Construction - Timber Structures
AASHTO HB-17 DIVISION II SEC 17-2002 司第二建筑-防腐剂处理的木材 Division II Construction - Preservative Treatment of Wood
AASHTO HB-17 DIVISION II SEC 18-2002 司第二建筑-轴承-勘误表2 003分之01 Division II Constuction - Bearings-Errata 01/2003
AASHTO HB-17 DIVISION II SEC 19-2002 司第二建筑-桥面联合海豹 Division II Construction - Bridge Deck Joint Seals
AASHTO HB-17 DIVISION II SEC 20-2002 司第二建筑-栏杆 Division II Construction - Railings
AASHTO HB-17 DIVISION II SEC 21-2002 司第二建筑-防水 Division II Construction - Waterproofing
AASHTO HB-17 DIVISION II SEC 22-2002 司第二建筑-护坡 Division II Construction - Slope Protection
AASHTO HB-17 DIVISION II SEC 23-2002 司第二建设-杂项金属 Division II Construction - Miscellaneous Metal
AASHTO HB-17 DIVISION II SEC 24-2002 司第二建筑-气动应用砂浆 Division II Construction - Pneumatically Applied Mortar
AASHTO HB-17 DIVISION II SEC 25-2002 司第二建筑-钢筋和混凝土隧道衬砌 Division II Construction - Steel and Concrete Tunnel Liners
AASHTO HB-17 DIVISION II SEC 26-2002 司第二建筑-金属涵洞-勘误表2 003分之01 Division II Construction - Metal Culverts-Errata 01/2003
AASHTO HB-17 DIVISION II SEC 27-2002 司第二建设-混凝土暗渠 Division II Construction - Concrete Culverts
AASHTO HB-17 DIVISION II SEC 28-2002 司第二建设-服装面 Division II Construction - Wearing Surfaces
AASHTO HB-17 DIVISION II SEC 29-2002 司第二建筑-埋设锚 Division II Construction - Embedment Anchors
AASHTO HB-17 DIVISION II SEC 30-2002 司第二建筑-热塑性管勘误表2 003分之01 Division II Construction - Thermoplastic Pipe-Errata 01/2003
AASHTO HB-17 TOC-2002 标准规格为公路桥梁-第十七版;勘误表： 2003分之01 ;勘误表： 03/2005 Standard Specifications for Highway Bridges-17th Edition; Errata: 01/2003; Errata: 03/2005
AASHTO HBF-2-2003 引导规范公路大桥的制备与hps七十零瓦特（ hps四八五瓦特）钢 GUIDE SPECIFICATION FOR HIGHWAY BRIDGE FABRICATION WITH HPS 70W (HPS 485W) STEEL
AASHTO HCE-2003 战略绩效的措施，国家有关部门的运输;手册的CEO和总裁- nchrp项目编号20-24 （ 20 ） Strategic Performance Measures for State Departments of Transportation; A Handbook for CEOs and Executives-NCHRP Project No. 20-24 (20)
AASHTO HDG-2007 公路排水指引-第4版 Highway Drainage Guidelines-4th edition
AASHTO HDG CHAPTER 1-2007 液压考虑在公路的规划和定位第4版 HYDRAULIC CONSIDERATIONS IN HIGHWAY PLANNING AND LOCATION-4th edition
AASHTO HDG CHAPTER 2-2007 水文-第4版 HYDROLOGY-4th edition
AASHTO HDG CHAPTER 3-2007 侵蚀和泥沙控制在公路建设中-第4版 EROSION AND SEDIMENT CONTROL IN HIGHWAY CONSTRUCTION-4th edition
AASHTO HDG CHAPTER 4-2007 水力设计涵洞-第4版 HYDRAULIC DESIGN OF CULVERTS-4th edition
AASHTO HDG CHAPTER 5-2007 法律方面的公路排水-第4版 THE LEGAL ASPECTS OF HIGHWAY DRAINAGE-4th edition
AASHTO HDG CHAPTER 6-2007 液压分析与设计的开放频道-第4版 HYDRAULIC ANALYSIS AND DESIGN OF OPEN CHANNELS-4th edition
AASHTO HDG CHAPTER 7-2007 液压分析的位置及设计的桥梁-第4版 HYDRAULIC ANALYSIS FOR THE LOCATION AND DESIGN OF BRIDGES-4th edition
AASHTO HDG CHAPTER 8-2007 液压方面的恢复和提升公路-第4版 HYDRAULIC ASPECTS IN RESTORATION AND UPGRADING OF HIGHWAYS-4th edition
AASHTO HDG CHAPTER 9-2007 风暴流失系统-第4版 STORM DRAIN SYSTEMS-4th edition
AASHTO HDG CHAPTER 10-2007 评价公路的影响，地表水环境-第4版 EVALUATING HIGHWAY EFFECTS ON SURFACE WATER ENVIRONMENTS-4th edition
AASHTO HDG CHAPTER 11-2007 公路沿海岸带和lakeshores -第4版 HIGHWAYS ALONG COASTAL ZONES AND LAKESHORES-4th edition
AASHTO HDG CHAPTER 12-2007 雨水管理-第4版 STORMWATER MANAGEMENT-4th edition
AASHTO HDG CHAPTER 13-2007 培训和职业发展的液压工程师-第4版 TRAINING AND CAREER DEVELOPMENT OF HYDRAULICS ENGINEERS-4th edition
AASHTO HDG CHAPTER 14-2007 涵洞检查，材料选择，和康复指引-第4版 CULVERT INSPECTION, MATERIAL SELECTION, AND REHABILITATION GUIDELINE-4th edition
AASHTO HDG CHAPTER 15-2007 准则选择和利用水力工程顾问-第4版 GUIDELINES FOR SELECTING AND UTILIZING HYDRAULICS ENGINEERING CONSULTANTS-4th edition
AASHTO HDG GLOSSARY-2007 词汇公路有关的排水条件第4版 GLOSSARY OF HIGHWAY-RELATED DRAINAGE TERMS-4th edition
AASHTO HDG TOC-2007 公路排水指引-第4版 Highway Drainage Guidelines-4th edition
AASHTO HDS-1-2005 高清晰度的调查- HDS公司 HIGH DEFINITION SURVEYS-HDS
AASHTO HLED-2-1991 引导运输景观和环境设计 Guide for Transportation Landscape and Environmental Design
AASHTO HM-26-2006 标准规格为运输材料和方法的采样和测试-第二十六版;的一部分，保险业监督与IB部分;第IIA部及部分独立调查委员会;包括2006年的PS Standard Specifications for Transportation Materials and Methods of Sampling and Testing-26th Edition; Part IA & Part IB; Part IIA & Part IIB; Includes PS 2006
AASHTO HM-26 PT I-2006 标准规格为运输材料和方法的采样和测试部分：技术指标-第二十六版;包括部分IA和IB部分 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications-26th Edition; Includes Part IA and Part IB
AASHTO HM-26 PT I TOC-2006 标准规格为运输材料和方法的采样和测试部分：技术指标-第二十六版;包括表的内容的一部分， IA和IB部分 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications-26th Edition; Includes Table of Contents for Part IA and Part IB
AASHTO HM-26 PT II-2006 标准规格为运输材料和方法的采样和测试，第二部分：测试-第二十六版;包括第IIA部及部分独立调查委员会 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II: Tests-26th Edition; Includes Part IIA and Part IIB
AASHTO HM-26 PT II TOC-2006 标准规格为运输材料和方法的采样和测试的第二部分测试，第二十六版;包括表的内容为第IIA部及部分独立调查委员会 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II Tests-26th Edition; Includes Table of Contents for Part IIA and Part IIB
AASHTO HWPD-1-1990 危险废物的指南，项目开发 Hazardous Waste Guide for Project Development
AASHTO IGSRB-1-1999 督察麓指南喷射混凝土桥梁维修-专责小组3 7报告 Inspectors麓 Guide for Shotcrete Repair of Bridges - Task Force 37 Report
AASHTO IMQA-1996 执行手册的质量保证 Implementation Manual for Quality Assurance
AASHTO INDEX-2000 第二部分测试，指数第二十版 Part II Tests Index-Twentieth Edition
AASHTO INDEX-2000 I部分规格指数第二十版 Part I Specifications Index-Twentieth Edition
AASHTO INDEX-2002 指数的标准规格为公路桥梁2002年第十七版 Index to Standard Specifications for Highway Bridges 2002-17th Edition
AASHTO IPRT-1-2002 城际客运轨道交通 Intercity Passenger Rail Transportation
AASHTO IQED-1-2006 提高质量，环保方面的文件 Improving the Quality of Environmental Documents
AASHTO ITF-1995 创新交通融资;一份报告，结果一次全国性调查由美国协会的州公路和运输官员 Innovative Transportation Financing; A Report on the Results of a National Survey by the American Association of State Highway and Transportation Officials
AASHTO ITS-1-2000 有效的收购做法;的一个委员会的报告，该小组委员会aashto先进的运输系统 Effective Acquisition Practices; A Committee Report of the AASHTO Subcommittee on Advanced Transportation Systems
AASHTO LPH-1980 指导，规范高速公路照明极硬件技术公告no.270 ;标准表格， no.133 ; preparded由专责小组第13号（最佳可复制） A Guide to Standardized Highway Lighting Pole Hardware-Technical Bulletin No.270; Standard form No.133; Preparded by Task Force No.13; (BEST AVAILABLE COPY)
AASHTO LRFD-CONS AMD-2004 aashto lrfd桥梁施工技术指标-第二版 AASHTO LRFD Bridge Construction Specifications-Second Edition
AASHTO LRFDCONS-2004 aashto lrfd桥梁施工技术指标-第二版;勘误表： 03/2005 ;勘误表： 06/2005 ;中期： 2006年 AASHTO LRFD Bridge Construction Specifications-Second Edition; Errata: 03/2005; Errata: 06/2005; Interim: 2006
AASHTO LRFD-MOV-2007 aashto lrfd动产公路桥梁设计规范-第二版 AASHTO LRFD Movable Highway Bridge Design Specifications-Second Edition
AASHTO LRFD SI ERTA-2007 aashto lrfd桥梁设计规格-S I单位 AASHTO LRFD Bridge Design Specifications - SI Units
AASHTO LRFD SI CHG 1-2007 aashto lrfd桥梁设计规格-S I单位-第四版 AASHTO LRFD Bridge Design Specifications - SI Units-Fourth Edition
AASHTO LRFD SI-2007 aashto lrfd桥梁设计规格-S I单位-第四版 AASHTO LRFD Bridge Design Specifications - SI Units-Fourth Edition
AASHTO LRFD U.S. ERTA-2007 aashto lrfd桥梁设计规格-习惯美国的单位 AASHTO LRFD Bridge Design Specifications - Customary U.S. Units
AASHTO LRFD U.S. CHG-2007 aashto lrfd桥梁设计规格-习惯美国的单位 AASHTO LRFD Bridge Design Specifications - Customary U.S. Units
AASHTO LRFD U.S.-2007 aashto lrfd桥梁设计规格-习惯美国的单位-第四版 AASHTO LRFD Bridge Design Specifications - Customary U.S. Units-Fourth Edition
AASHTO LRFR-2003 指南手册，供条件的评价和负载和阻力系数评级（ lrfr ）公路桥梁修订的封面; 2005年中期 GUIDE MANUAL FOR CONDITION EVALUATION AND LOAD AND RESISTANCE FACTOR RATING (LRFR) OF HIGHWAY BRIDGES-Revised cover sheet; Interim 2005
AASHTO LTA-2003 运输;投资在美国;听取美国报告，关于aashto麓s茶- 21重新授权区域论坛 Transportation; Invest in America; Listening to America; Report on AASHTO麓s TEA-21 Reauthorization Regional Forums
AASHTO LTS-4-2001 标准规格的结构性支持，为公路标志，灯具和交通信号-第四版;临时2002年中期2003年 Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals-Fourth Edition; Interim 2002; Interim 2003
AASHTO M 6-2003 标准规格为细骨料为波特兰水泥混凝土 Standard Specification for Fine Aggregate for Portland Cement Concrete
AASHTO M 17-1995 标准规格为矿物填料沥青铺路混合物- ASTM标准：美国ASTM d242 - 95 （ 2000 ） Standard Specification for Mineral Filler for Bituminous Paving Mixtures-ASTM Designation: ASTM D242-95 (2000)
AASHTO M 20-1970 标准规格为渗透率级沥青水泥 Standard Specification for Penetration-Graded Asphalt Cement
AASHTO M 29-2003 标准规格为细骨料沥青铺路混合物- ASTM标准： d 1073年至1094年 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures-ASTM Designation: D 1073-94
AASHTO M 30-2002 标准规格为锌涂层钢丝绳和配件的公路护栏-陛下- 22 ;的一部分，保险业监督; ASTM标准： 1 741-98 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail-HM-22; PART IA; ASTM Designation: A 741-98
AASHTO M 31M/M 31-2006 标准规格为变形和平原碳-钢筋混凝土加固- ASTM标准： 1 615 /一六百一十五米- 05 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement-ASTM Designation: A 615/A 615M-05
AASHTO M 32M/M 32-2005 标准方法测试钢丝，平原，为钢筋混凝土-美国ASTM指定： 82-02 Standard Method of Test for Steel Wire, Plain, for Concrete Reinforcement-ASTM Designation: A 82-02
AASHTO M 33-1999 标准规格为预制伸缩缝填充混凝土（沥青型） -美国ASTM d 994-98 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)-ASTM D 994-98
AASHTO M 36-2003 标准规格为波纹钢管，金属涂层，污水渠及雨水渠- ASTM标准： 1 760 /一七百六十〇米- 01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains-ASTM Designation: A 760/A 760M-01a
AASHTO M 43-2005 标准规格为大小总计为道路和桥梁建设ASTM标准： d 448 - 03a Standard Specification for Sizes of Aggregate for Road and Bridge Construction-ASTM Designation: D 448-03a
AASHTO M 45-2006 标准规格为骨料砌筑砂浆- ASTM标准的指定中： C 144-04 Standard Specification for Aggregate for Masonry Mortar-ASTM Designation: C 144-04
AASHTO M 54M/M 54-2006 标准规格为焊接变形的钢筋垫，为钢筋混凝土- ASTM标准： 1 184 /一184米- 05 Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement-ASTM Designation: A 184/A 184M-05
AASHTO M 55M/M 55-2005 标准方法试验钢焊接的导线加固，平原，混凝土ASTM标准： 1 185-02 Standard Method of Test for Steel Welded Wire Reinforcement, Plain, for Concrete-ASTM Designation: A 185-02
AASHTO M 57-1980 标准规格为材料的河堤和路基 Standard Specification for Materials for Embankments and Subgrades
AASHTO M 69-1970 标准规格铝涂料 Standard Specification for Aluminum Paint
AASHTO M 80-1987 标准规格为粗骨料为波特兰水泥混凝土 Standard Specification for Coarse Aggregate for Portland Cement Concrete
AASHTO M 81-1992 标准规格为截回沥青（快速固化型） Standard Specification for Cut-Back Asphalt (Rapid-Curing Type)
AASHTO M 82-1975 标准规格为削减沥青（中等固化型） Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 85-2006 标准规格为波特兰水泥- ASTM标准的指定中： C 150 04a Standard Specification for Portland Cement-ASTM Designation: C 150-04a
AASHTO M 86M/M 86-2006 标准规格为具体的下水道，风暴流失，和涵管- ASTM标准的指定中： C十四米- 04和C 14-03 Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe-ASTM Designation: C 14M-04 and C 14-03
AASHTO M 91-2005 标准规格为污水处理及沙井砖（由粘土或页岩） ASTM标准的指定中： C 32-04 Standard Specification for Sewer and Manhole Brick (Made from Clay or Shale)-ASTM Designation: C 32-04
AASHTO M 92-2005 标准规格电线布分子筛是为了测试目的-美国ASTM指定：电子11月4日 Standard Specification for Wire-Cloth Sieves for Testing Purposes-ASTM Designation: E 11-04
AASHTO M 102M/M 102-2006 标准规格为钢锻件，碳，及合金，一般工业使用ASTM标准： 1 668 /一六六八米- 04 Standard Specification for Steel Forgings, Carbon, and Alloy, for General Industrial Use-ASTM Designation: A 668/A 668M-04
AASHTO M 103M/M 103-2006 标准规格为铸钢件，碳，一般应用的ASTM标准：一27 /一27米- 05 Standard Specification for Steel Castings, Carbon, for General Application-ASTM Designation: A 27/A 27M-05
AASHTO M 105-2006 标准规格为灰铸铁件 Standard Specification for Gray Iron Castings
AASHTO M 107-2004 标准规格为青铜铸件的桥梁和转盘- ASTM标准： b 22-02 Standard Specification for Bronze Castings for Bridges and Turntables-ASTM Designation: B 22-02
AASHTO M 108-2005 标准规格为变形铜合金轴承和扩展板和床单，桥梁和其他结构的使用ASTM标准： b 100 03a Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use-ASTM Designation: B 100-03a
AASHTO M 111M/M 111-2004 标准规格为锌（热浸镀锌）涂层对钢铁产品- ASTM标准： 1 123 /一一二三米- 02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products-ASTM Designation: A 123/A 123M-02
AASHTO M 114-2006 标准规格为建设砖（固体砌体单位由粘土或页岩） ASTM标准的指定中： C 62 - 04a Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)-ASTM Designation: C 62-04a
AASHTO M 120-2005 标准规格为锌ASTM标准： b 6月3日 Standard Specification for Zinc-ASTM Designation: B 6-03
AASHTO M 133-2006 标准规格为防腐剂及压力处理过程木材 Standard Specification for Preservatives and Pressure Treatment Processes for Timber
AASHTO M 138M/M 138-2002 标准规格为铜表，带，板，并推出条码陛下- 22 ：第一部分保险业监督; ASTM标准： b 152 / b一百五十二米- 00 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar-HM-22: Part IA; ASTM Designation: B 152/B 152M-00
AASHTO M 140-2003 标准规格为乳化沥青-美国ASTM指定d 977-98 Standard Specification for Emulsified Asphalt-ASTM Designation D 977-98
AASHTO M 143-2003 标准规格为氯化钠- ASTM标准： d 632-01 Standard Specification for Sodium Chloride-ASTM Designation: D 632-01
AASHTO M 144-2004 标准规格为氯化钙- ASTM标准： d 98-98 Standard Specification for Calcium Chloride-ASTM Designation: D 98-98
AASHTO M 145-1991 标准规格的分类，土壤和土壤集料的混合物为公路建设的目的 Standard Specifications for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
AASHTO M 146-1991 标准规格为有关的条款，路基，土壤总结，并填写材料 Standard Specification for Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials
AASHTO M 147-1965 标准规格的材料，为总结和土壤集料底基层，基础和表面课程 Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base and Surface Courses
AASHTO M 148-2005 标准规格为液膜形成的化合物固化混凝土ASTM标准的指定中： C 309-03 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete-ASTM Designation: C 309-03
AASHTO M 152M/M 152-2006 标准规格为流量表用于在测试液压水泥ASTM标准指定c 230 /炭二百三十○米- 03 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement-ASTM Designation C 230/C 230M-03
AASHTO M 153-2006 标准规格为预制海绵橡胶和软木伸缩缝填料混凝土路面和结构施工-美国ASTM指定d 1752 - 04a Standard Specification for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction-ASTM Designation D 1752-04a
AASHTO M 154-2006 标准规格的空调entraining混凝土外加剂-美国ASTM指定c 260-01 Standard Specification for Air-Entraining Admixtures for Concrete-ASTM Designation C 260-01
AASHTO M 155-1987 标准规格的颗粒物质控制抽水下，水泥混凝土路面 Standard Specification for Granular Material to Control Pumping under Concrete Pavement
AASHTO M 156-1997 标准规格的要求，植物混合热混合，热奠定了沥青铺路混合物- ASTM标准： d995 - 95b Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures-ASTM Designation: D995-95b
AASHTO M 157-2006 标准规格为准备预拌混凝土 Standard Specification for Ready-Mixed Concrete
AASHTO M 160M/M 160-2006 标准规格为总体要求的钢板，形状，资产负债表打桩，和酒吧的结构使用ASTM标准degsignation ： 6 / 1 6 - 05 Standard Specification for General Requirements for Steel Plates, Shapes, Sheet Piling, and Bars for Structural Use-ASTM Degsignation: A 6/A 6M-05
AASHTO M 163M/M 163-2006 标准规格为铸件，铁，铬，铁铬镍，耐腐蚀，一般应用的ASTM标准： 1 743 /一七四三米- 03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application-ASTM Designation: A 743/A 743M-03
AASHTO M 164-2005 标准规格为高强度螺栓结构钢接头- ASTM标准： 1 325 - 04b Standard Specification for High-Strength Bolts for Structural Steel Joints-ASTM Designation: A 325-04b
AASHTO M 164M-2006 标准规格为高强度螺栓结构钢接头[公制] -美国ASTM指定一325米- 04b Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]-ASTM Designation A 325M-04b
AASHTO M 167M/M 167-2005 标准规格为波纹钢结构板，锌涂层，为外地螺栓管，管拱门，拱门- ASTM标准： 1 761 /一761米- 04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches-ASTM Designation: A 761/A 761M-04
AASHTO M 168-1996 标准规格为木材产品 Standard Specification for Wood Products
AASHTO M 169-2006 标准规格为钢筋，碳，及合金，冷战结束- ASTM标准： 1 108-03 Standard Specification for Steel Bars, Carbon, and Alloy, Cold-Finished-ASTM Designation: A 108-03
AASHTO M 170-2006 标准规格的钢筋混凝土涵洞，风暴流失，和下水道管ASTM标准的指定中： C 76-05 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 76-05
AASHTO M 170M-2006 标准规格的钢筋混凝土涵洞，风暴流失，和下水道管（公制） - ASTM标准的指定中： C七六米- 05 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)-ASTM Designation: C 76M-05
AASHTO M 171-2005 标准规格板材料的固化混凝土ASTM标准： c171 - 03 Standard Specification for Sheet Materials for Curing Concrete-ASTM Designation: C171-03
AASHTO M 175M/M 175-2005 标准规格为穿孔混凝土管- ASTM标准的指定中： C四百四十四米/炭444-03 Standard Specification for Perforated Concrete Pipe-ASTM Designation: C 444M/C 444-03
AASHTO M 176M/M 176-2006 标准规格为多孔混凝土管（公制） - ASTM标准的指定中： C 654米- 04 Standard Specification for Porous Concrete Pipe (Metric)-ASTM Designation: C 654M-04
AASHTO M 178M/M 178-2006 标准规格为混凝土排水管瓦ASTM标准的指定中： C四百一十二米- 04和C 412-03 Standard Specification for Concrete Drain Tile-ASTM Designation: C 412M-04 and C 412-03
AASHTO M 180-2000 标准规格为波纹板型钢梁公路护栏 Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail
AASHTO M 181-2005 标准规格为链条连接围栏 Standard Specification for Chain-Link Fence
AASHTO M 182-2005 标准规格为burlap布制成的黄麻或红麻和棉花垫 Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats
AASHTO M 190-2004 标准规格为沥青包覆金属波纹涵管和管拱 Standard Specification for Bituminous Coated Corrugated Metal Culvert Pipe and Pipe Arches
AASHTO M 194M/M 194-2006 标准规格为化学外加剂混凝土 Standard Specification for Chemical Admixtures for Concrete
AASHTO M 195-2006 标准规格为轻集料结构混凝土第二十版; ASTM标准c330 - 04 Standard Specification for Lightweight Aggregates for Structural Concrete-Twentieth Edition; ASTM C330-04
AASHTO M 196-1992 标准规格为铝波纹管污水渠及雨水渠-美国ASTM b745/b745m-95 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains-ASTM B745/B745M-95
AASHTO M 197-2006 标准规格铝合金板铝波纹管 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
AASHTO M 198-2005 标准规格为关节混凝土管，沙井，及预制方块路段使用预制柔性接头密封剂- ASTM标准的指定中： C 990 - 03a Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants-ASTM Designation: C 990-03a
AASHTO M 199M/M 199-2005 标准规格为预制钢筋混凝土沙井路段- ASTM标准的指定中： C 478m/c478-03a Standard Specification for Precast Reinforced Concrete Manhole Sections-ASTM Designation: C 478M/C478-03a
AASHTO M 200-1973 标准规格为环氧防护涂层 Standard Specification for Epoxy Protective Coatings
AASHTO M 201-2006 标准规格为混合室，潮湿的橱柜，潮湿的房间，和水箱中使用的测试液压水泥和混凝土- ASTM标准的指定中： C 511-05 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes-ASTM Designation: C 511-05
AASHTO M 202M/M 202-2006 标准规格为钢板桩-美国ASTM指定一328 /一三百二十八米- 05 Standard Specification for Steel Sheet Piling-ASTM Designation A 328/A 328M-05
AASHTO M 203M/M 203-2005 标准规格为钢绞线，未七线为钢筋混凝土- ASTM标准： 1 416 /一四百一十六米- 02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement-ASTM Designation: A 416/A 416M-02
AASHTO M 204M/M 204-2006 标准规格为无应力解除钢丝预应力混凝土- ASTM标准： 1 421 /一421米- 05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete-ASTM Designation: A 421/A 421M-05
AASHTO M 205M/M 205-2006 标准规格为模具成形混凝土试验缸垂直-美国ASTM指定c 470/470m-02a Standard Specification for Molds for Forming Concrete Test Cylinders Vertically-ASTM Designation C 470/470M-02a
AASHTO M 206M/M 206-2006 标准规格的钢筋混凝土拱涵，风暴流失，和下水道管ASTM标准的指定中： C 506 - 05a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 506-05a
AASHTO M 207M/M 207-2006 标准规格的钢筋混凝土椭圆形暗渠，风暴流失和污水管（公制） -美国ASTM指定c五〇七米- 05a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain and Sewer Pipe (Metric)-ASTM Designation C 507M-05a
AASHTO M 208-2001 标准规格为阳离子乳化沥青-陛下- 22 ;的一部分，保险业监督; ASTM标准指定d 2397-98 Standard Specification for Cationic Emulsified Asphalt-HM-22; Part IA; ASTM Designation D 2397-98
AASHTO M 210-2006 标准规格为使用器具进行测定长度变化的硬化水泥浆体，砂浆，混凝土ASTM标准指定c 490-04 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete-ASTM Designation C 490-04
AASHTO M 213-2001 标准规格为预制伸缩缝填料混凝土路面和结构建设（ nonextruding和弹性沥青类型） -美国ASTM指定d 1751年至1799年 Standard Specification for Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)-ASTM Designation D 1751-99
AASHTO M 216-2005 标准规格为石灰稳定土- ASTM标准的指定中： C 977-03 Standard Specification for Lime for Soil Stabilization-ASTM Designation: C 977-03
AASHTO M 218-2003 标准规格的钢板，锌涂层（镀锌） ，波纹钢管 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe
AASHTO M 219-1992 标准规格的瓦楞纸铝合金结构板为外地螺栓管，管拱门，拱门-美国ASTM b746/b746m-92 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches-ASTM B746/B746M-92
AASHTO M 220-1984 标准规格为预制氯丁橡胶联合密封混凝土路面-美国ASTM d2628 - 91 （ 1998 ） Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements-ASTM D2628-91(1998)
AASHTO M 221M/M 221-2005 标准规格的钢材焊接的导线加固，变形，混凝土ASTM标准： 1 497-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete-ASTM Designation: A 497-02
AASHTO M 224-1991 标准规格为使用防护封口为波特兰水泥混凝土 Standard Specification for Use of Protective Sealers for Portland Cement Concrete
AASHTO M 225M/M 225-2005 标准规格的钢丝，变形，钢筋混凝土- ASTM标准： 1 496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement-ASTM Designation: A 496-02
AASHTO M 226-1980 标准规格为粘度级沥青水泥 Standard Specification for Viscosity-Graded Asphalt Cement
AASHTO M 227M/M 227-1997 标准规格为钢筋，碳，商家的质量，力学性能- ASTM标准： 1 663 /一六百六十三米- 89 （ 2000 ） Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties-ASTM Designation: A 663/A 663M-89 (2000)
AASHTO M 230-1998 标准规格为挤压泡沫委员会（聚苯乙烯） Standard Specification for Extruded Foam Board (Polystyrene)
AASHTO M 231-1995 标准规格为称重装置中使用的测试材料 Standard Specification for Weighing Devices Used in the Testing of Materials
AASHTO M 232M/M 232-2006 标准规格的镀锌层（热浸）对钢铁硬件ASTM标准： 1 153 /一一百五十三米- 05 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-ASTM Designation: A 153/A 153M-05
AASHTO M 233-1986 标准规格为煮沸的亚麻油合剂治疗波特兰水泥混凝土 Standard Specification for Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete
AASHTO M 235M/M 235-2003 标准规格为环氧树脂胶粘剂- ASTM标准的指定中： C 881-99 Standard Specification for Epoxy Resin Adhesives-ASTM Designation: C 881-99
AASHTO M 237-1996 标准规格为环氧树脂胶粘剂的粘接交通标志，以硬化波特兰水泥和沥青混凝土 Standard Specification for Epoxy-Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete
AASHTO M 240-2005 标准规格为混纺液压水泥ASTM标准的指定中： C 595-03 Standard Specification for Blended Hydraulic Cement-ASTM Designation: C 595-03
AASHTO M 241M/M 241-2005 标准规格容量配料和连续混合ASTM标准的指定中： C 685 /炭685米- 01 Standard Specification by Volumetric Batching and Continuous Mixing-ASTM Designation: C 685/C 685M-01
AASHTO M 242M/M 242-2006 标准规格的钢筋混凝土的D -负荷涵洞，风暴流失，和下水道管ASTM标准的指定中： C 655米/炭655-04素E1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 655M/C 655-04 e1
AASHTO M 243-1996 标准规格为外地应用涂层的金属结构瓦楞纸板管，管拱门，拱门 Standard Specification for Field Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches
AASHTO M 245-2000 标准规格为波纹钢管，聚合物预涂，污水渠及雨水渠- ASTM标准： 1 762 /一762米- 98 Standard Specification for Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains-ASTM Designation: A 762/A 762M-98
AASHTO M 246-2005 标准规格的钢板，金属涂层和聚合物预涂，波纹钢管ASTM标准： 1 742 /一742米- 03 Standard Specification for Steel Sheet, Metallic-Coated and Polymer- Precoated, for Corrugated Steel Pipe-ASTM Designation: A 742/A 742M-03
AASHTO M 247-2005 标准规格为玻璃珠使用的交通油漆 Standard Specification for Glass Beads Used in Traffic Paints
AASHTO M 248-1991 标准规格为现成的混合白色和黄色的交通油漆 Standard Specification for Ready-Mixed White and Yellow Traffic Paints
AASHTO M 249-1998 标准规格为白色和黄色反光带热塑性材料（固体的形式） Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
AASHTO M 251-2006 标准规格为平原和叠层橡胶桥梁轴承 Standard Specification for Plain and Laminated Elastomeric Bridge Bearings
AASHTO M 252-2006 标准规格的瓦楞纸聚乙烯排水管 Standard Specification for Corrugated Polyethylene Drainage Pipe
AASHTO M 253-2005 标准规格为结构螺栓，合金钢，热处理， 150 ksi最小抗拉强度- ASTM标准： 1 490 - 04a Standard Specification for Structural Bolts, Alloy Steel, Heat-Treated, 150 ksi Minimum Tensile Strength-ASTM Designation: A 490-04a
AASHTO M 253M-2005 标准规格为高强度钢螺栓，班10.9和10.9.3 ，结构钢接头[公制] - ASTM标准：一四九○米- 04a Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]-ASTM Designation: A 490M-04a
AASHTO M 254-2006 标准规格为耐腐蚀涂层柱酒吧 Standard Specification for Corrosion-Resistant Coated Dowel Bars
AASHTO M 255M/M 255-2005 标准规格为钢筋，碳，热变形，特别质量，力学性能- ASTM标准： 1 675 /一675米- 03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties-ASTM Designation: A 675/A 675M-03
AASHTO M 259-1998 标准规格为预制钢筋混凝土箱部分桥涵，雨水渠，污水渠- ASTM标准的指定中： C 789 - 95a Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers-ASTM Designation: C 789-95a
AASHTO M 259M-2000 标准规格为预制钢筋混凝土箱部分桥涵，雨水渠，污水渠[公制] -美国ASTM c789m - 98 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]-ASTM C789M-98
AASHTO M 261-1996 标准规格为标准的轮胎路面摩擦性能测试，美国ASTM指定e 501-94 （ 2000 ） Standard Specification for Standard Tire for Pavement Frictional Property Tests-ASTM Designation E 501-94 (2000)
AASHTO M 262-2006 标准的定义，有关的条款，混凝土管及相关产品-美国ASTM指定c 822 - 05a Standard Definitions of Terms Relating to Concrete Pipe and Related Products-ASTM Designation C 822-05a
AASHTO M 264-2003 标准规格为丙烯腈-丁二烯-苯乙烯（ ABS树脂）和聚（氯乙烯） （聚氯乙烯）复合材料的污水管道- ASTM标准： d 2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping-ASTM Designation: D 2680-01
AASHTO M 268-2006 标准规格为逆钢板交通管制- ASTM标准： d 4956-04 Standard Specification for Retroreflective Sheeting for Traffic Control-ASTM Designation: D 4956-04
AASHTO M 269-1996 标准规格为turnbuckles和桎梏中解放出来 Standard Specification for Turnbuckles and Shackles
AASHTO M 270M/M 270-2005 标准规格为结构钢桥梁- ASTM标准： 1 709 /一七〇九米- 05 Standard Specification for Structural Steel for Bridges-ASTM Designation: A 709/A 709M-05
AASHTO M 271-2002 标准规格为评价爆破清洗，钢表面-陛下- 22 ; IB部分 Standard Specification for The Evaluation of Blast-Cleaned Steel Surfaces-HM-22; Part IB
AASHTO M 273-2000 标准规格为预制钢筋混凝土箱部分桥涵，雨水渠，污水渠，与不少于2平方呎，包括受到公路荷载-美国ASTM c850 - 95a Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings-ASTM C850-95a
AASHTO M 273M-2000 标准规格为预制钢筋混凝土箱部分桥涵，雨水渠，污水渠与小于0.6米的范围受到公路荷载（公制） -美国ASTM c850m - 98 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings (Metric)-ASTM C850M-98
AASHTO M 274-1987 标准规格的钢板，铝涂层（ 2型） ，波纹钢管 Standard Specification for Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe
AASHTO M 275M/M 275-2006 标准规格为未高强度钢筋预应力混凝土ASTM标准： 1 722 /一七二二米- 05 Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete-ASTM Designation: A 722/A 722M-05
AASHTO M 277-2006 标准规格的钢丝绳和插座为动产的桥梁-陛下- 22 ; IB部分 Standard Specification for Wire Rope and Sockets for Movable Bridges-HM-22; Part IB
AASHTO M 278-2002 标准规格为工人阶级ps46聚（氯乙烯） （聚氯乙烯）管陛下- 22 ; IB部分 Standard Specification for Class PS46 Poly(Vinyl Chloride) (PVC) Pipe-HM-22; Part IB
AASHTO M 279-2003 标准规格的金属涂层，钢织铁丝网织物-美国ASTM a116 - 00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric-ASTM A116-00
AASHTO M 280-2003 标准规格的金属包覆碳钢铁丝网-美国ASTM指定1 121-99 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire-ASTM Designation A 121-99
AASHTO M 281-1996 标准规格的钢栅栏的职位和集会，热变形-美国ASTM指定一702-89 （ 1994 ）素E1 Standard Specification for Steel Fence Posts and Assemblies, Hot-Wrought-ASTM Designation A 702-89(1994)E1
AASHTO M 282-1999 标准规格为联合密封胶，热浇，弹性型，为波特兰水泥混凝土路面- ASTM标准的名称; d 3406-95 （ 2000 ） Standard Specification for Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements-ASTM Designation; D 3406-95 (2000)
AASHTO M 284M/M 284-2006 标准规格为环氧涂层钢筋：材料和涂料的要求-美国ASTM指定一775 /一775米- 04a Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements-ASTM Designation A 775/A 775M-04a
AASHTO M 285M/M 285-2003 标准规格为铸件，铁铬镍，耐腐蚀，严重服务ASTM标准指定a744/a744m-00 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service-ASTM Designation A744/A744M-00
AASHTO M 286-1996 标准规格为顺利-轮胎胎面的标准，特别用途路面摩擦性能测试，美国ASTM指定e 524-88 （ 2000 ） Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests-ASTM Designation E 524-88(2000)
AASHTO M 288-2006 标准规格为土工织物的规格，公路申请 Standard Specification for Geotextile Specification for Highway Applications
AASHTO M 289-1991 标准规格为铝锌合金涂层钢板波纹钢管 Standard Specification for Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe
AASHTO M 290-1996 标准规格为丙烯酸，棱柱形反射镜和压花铝框的迹象 Standard Specification for Acrylic, Prismatic Reflectors and Embossed Aluminum Frames for Signs
AASHTO M 291-2006 标准规格为碳和合金钢坚果-美国ASTM指定1 563 - 04a Standard Specification for Carbon and Alloy Steel Nuts-ASTM Designation A 563-04a
AASHTO M 291M-2006 标准规格为碳和合金钢坚果（公制） -美国ASTM指定一五六三米- 04 Standard Specification for Carbon and Alloy Steel Nuts (Metric)-ASTM Designation A 563M-04
AASHTO M 292M/M 292-2006 标准规格为碳和合金钢螺母螺栓高压力或高温度的服务，或两者- ASTM标准： 1 194 /一194米- 04b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both-ASTM Designation: A 194/A 194M-04b
AASHTO M 293-2006 标准规格为淬硬钢垫圈-美国ASTM指定f 436-04 Standard Specification for Hardened Steel Washers-ASTM Designation F 436-04
AASHTO M 293M-2006 标准规格为淬硬钢垫圈[公制] -美国ASTM指定f四百三十六米- 04 Standard Specification for Hardened Steel Washers [Metric]-ASTM Designation F 436M-04
AASHTO M 294-2006 标准规格的瓦楞纸聚乙烯管材， 300 -1 500毫米直径 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
AASHTO M 295-2006 标准规格为粉煤灰和原材料或煅烧天然pozzolan使用在混凝土ASTM标准的指定中： C 618-03 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete-ASTM Designation: C 618-03
AASHTO M 297-1998 标准规格为预制氯丁橡胶联合密封的桥梁-美国ASTM指定d 3542-92 （ 1998 ） Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges-ASTM Designation D 3542-92(1998)
AASHTO M 298-2005 标准规格为涂料锌机械沉积在钢铁- ASTM标准： b 695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel-ASTM Designation: B 695-04
AASHTO M 300-2003 标准规格为无机富锌底漆 Standard Specification for Inorganic Zinc-Rich Primer
AASHTO M 302-2006 标准规格为地面粒状高炉矿渣为使用在混凝土和迫击炮- ASTM标准的指定中： C 989-05 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars-ASTM Designation: C 989-05
AASHTO M 303-1989 标准规格为石灰沥青混合料 Standard Specification for Lime for Asphalt Mixtures
AASHTO M 304-2003 标准规格为聚（氯乙烯） （聚氯乙烯）简介墙排水管及配件的基础上控制的内直径 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
AASHTO M 306-2005 标准规格为排水，污水处理，公用设施，和相关的铸件 Standard Specification for Drainage, Sewer, Utility, and Related Castings
AASHTO M 307-2005 标准规格为硅粉使用的水泥混合物- ASTM标准的指定中： C 1240 - 03a Standard Specification for Silica Fume Used in Cementitious Mixtures-ASTM Designation: C 1240-03a
AASHTO M 314-1990 标准规格为钢锚杆 Standard Specification for Steel Anchor Bolts
AASHTO M 315-2006 标准规格为关节混凝土管及沙井，用橡胶垫片- ASTM标准的指定中： C 443-05 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets-ASTM Designation: C 443-05
AASHTO M 315M-2006 标准规格为关节通告，具体的污水和涵管，用橡胶垫片[公制] - ASTM标准的指定中： C四四三米- 05 Standard Specification for Joints for Circular Concrete sewer and culvert pipe, Using Rubber Gaskets [Metric]-ASTM Designation: C 443M-05
AASHTO M 316-1999 标准规格为聚合物改性阳离子乳化沥青 Standard Specification for Polymer Modified Cationic Emulsified Asphalt
AASHTO M 317M/M 317-2003 标准规格为环氧涂层钢筋：处理要求的制备和求职网站- ASTM标准： d 3963 / 3963米- 01 Standard Specification for Epoxy-Coated Reinforcing Bars: Handling Requirements for Fabrication and Job Site-ASTM Designation: D 3963/D 3963M-01
AASHTO M 318-2002 标准规格的玻璃碎玻璃所使用的土壤总量基地的过程中-重介- 22 ; IB部分 Standard Specification for Glass Cullet Use for Soil-Aggregate Base Course-HM-22; Part IB
AASHTO M 319-2002 标准规格为填海工程混凝土骨料为不受限制的土壤-聚集基地的过程中-重介- 22 ; IB部分 Standard Specification for Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course-HM-22; Part IB
AASHTO M 320-2005 标准规格，性能分级沥青粘结剂 Standard Specification for Performance-Graded Asphalt Binder
AASHTO M 321-2004 标准规格为高反应性pozzolans使用在液压水泥混凝土，砂浆，注浆 Standard Specification for High-Reactivity Pozzolans for Use In Hydraulic-Cement Concrete, Mortar, and Grout
AASHTO M 322M/M 322-2006 标准规格的铁路钢和车轴钢变形的酒吧为钢筋混凝土- ASTM标准： 1 996 /一996米- 05 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement-ASTM Designation: A 996/A 996M-05
AASHTO M 323-2004 标准规格为Superpave的体积配合比设计 Standard Specification for Superpave Volumetric Mix Design
AASHTO M 324-2004 标准规格为联合打击密封胶，热应用，混凝土和沥青路面-美国ASTM disgnation ： d 6690-01 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements-ASTM Disgnation: D 6690-01
AASHTO M 299-2005 标准规格为涂料镉机械交存- ASTM标准： b 696-00 （ 2004 ） Standard Specification for Coatings of Cadmium Mechanically Deposited-ASTM Designation: B 696-00 (2004)
AASHTO MBI-1-1998 aashto桥动产检查，评价和维修手册-第1版 AASHTO Movable Bridge Inspection, Evaluation and Maintenance Manual-First Edition
AASHTO MCEB-2-1994 手册条件评价桥梁-第二版;包括临时规格： 1995年， 1996年， 1998年， 2000年， 2001年和2003年 Manual for Condition Evaluation of Bridges-Second Edition; Includes Interim Specifications: 1995, 1996, 1998, 2000, 2001, and 2003
AASHTO MDM-3-2005 模型排水手册（美国和SI单位） Model Drainage Manual (U.S. and SI Units)
AASHTO MHB-5-1988 标准规格为动产公路桥梁修订的百分之临时规格-大桥的指导和操作手册- 19 92年和临时规格-桥梁- 19 93年，19 9 5年 Standard Specifications for Movable Highway Bridges-Revised per Interim Specifications - Bridge Guide and Manual - 1992 and Interim Specifications - Bridges - 1993, 1995
AASHTO MLCW-2007 aashto / naco / nado中西部地区的地方协商讲习班 AASHTO/NACo/NADO Midwest Local Consultation Workshop
AASHTO MMS-1-2005 指引维修管理系统 Guidelines for Maintenance Management Systems
AASHTO MP 8-2005 标准规格设计石基质沥青（形状记忆合金） Standard Specification for Designing Stone Matrix Asphalt (SMA)
AASHTO MP 9-2006 标准规格为堆肥侵蚀/沉积物控制（过滤护堤） Standard Specification for Compost Erosion/Sediment Control (Filter Berms)
AASHTO MP 10-2003 标准规格为堆肥侵蚀/沉积物控制（堆肥毛毡） Standard Specification for Compost Erosion/Sediment Control (Compost Blankets)
AASHTO MP 11-2003 标准的设备规格为惯性剖析 Standard Equipment Specifications for Inertial Profiler
AASHTO MP 12-2004 标准做法，表面探测的警告 Standard Practice for Detectable Warning Surfaces
AASHTO MP 13M/MP 13-2004 标准规格为不锈钢复合变形和平原一轮钢筋混凝土加固 Standard Specification for Stainless Clad Deformed and Plain Round Steel Bars for Concrete Reinforcement
AASHTO MP 14-2005 标准规格为光滑的路面在办法称重中的议案（动态称重）级 Standard Specification for Smoothness of Pavement at the Approaches to Weigh-in-Motion (WIM) Scales
AASHTO MP 15-2006 标准规格为使用再生沥青瓦作为添加剂的沥青混合料 Standard Specification for Use of Reclaimed Asphalt Shingle as an Additive in Hot-Mix Asphalt
AASHTO MPAS-1-2006 衡量绩效，其中国家点 Measuring Performance Among State DOTs
AASHTO MSD-2006 保持战略方向，为保护美国的运输系统 Maintaining Strategic Direction for Protecting America's Transportation System
AASHTO MSI-1988 手册对地下调查-第十八版 Manual on Subsurface Investigations-Eighteenth Edition
AASHTO NTCIP 1101-1996 美国国家运输通信及其议定书-简单的交通管理框架正式6月2 4日t s3 .2-1996;一项联合标准a ashto， i te，和消防防灾;包括共同批准n tcip1 101年修订一v 08： 2 001年1 2月 National Transportation Communications for ITS Protocol - Simple Transportation Management Framework-Formally TS 3.2-1996; A Joint Standard of AASHTO, ITE, and NEMA; Includes Jointly Approved NTCIP 1101 Amendment 1 v08: December 2001
AASHTO NTCIP 1201-1996 美国国家运输通信及其议定书-全局对象的定义- v 01.10;一项联合标准a ashto， i te，和消防防灾;包括共同批准n tcip1 201年修订一v 07： 2 001年1 2月 National Transportation Communications for ITS Protocol - Global Object Definitions-v01.10; A Joint Standard of AASHTO, ITE, and NEMA; Includes Jointly Approved NTCIP 1201 Amendment 1 v07: December 2001
AASHTO NTCIP 1202-1996 美国国家运输通信及其议定书（ ntcip ）对象定义为驱动的交通信号控制单位-原编号消防防灾6月24日ts 3.5-1996 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol (NTCIP) Object Definitions for Actuated Traffic Signal Controller Units-Formerly Numbered NEMA TS 3.5-1996; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 1203-1997 美国国家运输通信及其议定书（ ntcip ）对象定义为动态信息标志（简称DMS ） - v01.15 ;一项联合标准aashto ， ite ，和消防防灾; 1999年12月1日 National Transportation Communications for ITS Protocol (NTCIP) Object Definitions for Dynamic Message Signs (DMS)-V01.15; A Joint Standard of AASHTO, ITE, and NEMA; December 1, 1999
AASHTO NTCIP 1204-1998 美国国家运输通信及其议定书-对象定义为环境传感器站（ e ss） - v 01.13;一项联合标准a ashto， i te，和消防防灾;包括共同批准n tcip1 204年修订一v 02： 2 001年1 1月2 3日 National Transportation Communications for ITS Protocol - Object Definitions for Environmental Sensor Stations (ESS)-v01.13; A Joint Standard of AASHTO, ITE, and NEMA; Includes Jointly Approved NTCIP 1204 Amendment 1 v02: November 23, 2001
AASHTO NTCIP 1205-2001 美国国家运输通信及其议定书的对象定义为闭路电视（闭路电视）照相机控制v01.08 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control-v01.08; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 1207-2001 美国国家运输通信及其议定书-对象定义为坡道米控制（ R MC的）单位- v 01.17;一项联合标准a ashto， i te，和消防防灾 National Transportation Communications for ITS Protocol - Object Definitions for Ramp Meter Control (RMC) Units-v01.17; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 1400-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书tcip框架标准- v01.04 ;一项联合标准aashto ， ite ，和消防防灾;还引用作为tcip框架 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol TCIP Framework Standard-v01.04; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-FRAME
AASHTO NTCIP 1401-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，共同的公共交通（中华映管）的物体- v01.02 ;一项联合stanard的aashto ， ite ，和消防防灾;还引用作为tcip -中华映管 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Common Public Transportation (CPT) Objects-v01.02; A Joint Stanard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CPT
AASHTO NTCIP 1402-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，事件管理（ IM ）的物体- v01.02 ;联合标准aashto ， ite ，和消防防灾;还引用作为tcip -即时通讯; 2001年春季印刷 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Incident Management (IM) Objects-v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-IM; Spring 2001 printing
AASHTO NTCIP 1403-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，乘客信息（ PI ）的物体- v01.02 ;联合标准aashto ， ite ，和消防防灾;还引用作为tcip丕; 2001年春季印刷 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Passenger Information (PI) Objects-v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-PI; Spring 2001 printing
AASHTO NTCIP 1404-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，调度/ runcutting （附表）对象- v01.02 ;联合标准aashto ， ite ，和消防防灾;还引用作为tcip -中学; 2001年春季打印 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Scheduling / Runcutting (SCH) Objects-v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SCH; Spring 2001 print
AASHTO NTCIP 1405-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，空间的代表性（ SP ）的物体- v01.02 ;联合标准aashto ， ite ，和消防防灾;还引用作为tcip - SP的; 2001年春季印刷 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Spatial Representation (SP) Objects-v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SP; Spring 2001 printing
AASHTO NTCIP 1406-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，对板（转播）对象- v01.02 ;一项联合标准aashto ， ite ，和消防防灾;还引用作为tcip -转播 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on On-Board (OB) Objects-v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-OB
AASHTO NTCIP 1407-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准，控制中心（ CC ）的物体- v01.02 ;一项联合标准aashto ， ite ，和消防防灾;还引用作为tcip -消委会 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Control Center (CC) Objects-v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CC
AASHTO NTCIP 1408-2001 过境通信接口的配置文件的一部分，美国国家运输通信及其议定书的标准收费（财委会）业务领域的对象- v01.01 ;一项联合标准aashto ， ite ，和消防防灾;还引用作为tcip -财委会 Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Fare Collection (FC) Business Area Objects-v01.01; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-FC
AASHTO NTCIP 2001-1996 美国国家运输通信及其议定书- B级的个人资料-原编号消防防灾6月24日ts 3.3-1996 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol-Class B Profile-Formerly Numbered NEMA TS 3.3-1996; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 2101-2001 美国国家运输通信及其议定书-点，以多点议定书使用R S- 2 32的子网简介- v 01.19;一项联合标准a ashto， i te，和消防防灾 National Transportation Communications for ITS Protocol - Point to Multi-Point Protocol Using RS-232 Subnetwork Profile-v01.19; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 2202-2001 美国国家运输通信及其议定书的国际互联网（ TCP / IP协议和UDP / IP ）的运输简介- v01.05 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol Internet (TCP/IP and UDP/IP) Transport Profile-v01.05; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 2301-2001 美国国家运输通信及其议定书简单的交通管理架构的应用简介- v01.08 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol Simple Transportation Management Framework Application Profile-v01.08; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 2302-2001 美国国家运输通信及其议定书的琐碎文件传输协议的应用简介- v01.06 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol Trivial File Transfer Protocol Application Profile-v01.06; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 2303-2001 美国国家运输通信及其议定书的文件传输协议的应用简介- v01.06 ;一项联合标准aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol File Transfer Protocol Application Profile-V01.06; A Joint Standard of AASHTO, ITE, and NEMA
AASHTO NTCIP 8003-2001 美国国家运输通信及其议定书的框架简介- v01.08 ;一项联合信息管理的政策， aashto ， ite ，和消防防灾 National Transportation Communications for ITS Protocol Profile Framework-v01.08; A Joint Information Management Policy of AASHTO, ITE, and NEMA
AASHTO NTCIP 9001-2002 美国国家运输通信及其议定书-n tcip指南-更新版本3- v 0 3.02b;推荐信息报告的联合委员会关于nt cip National Transportation Communications for ITS Protocol - The NTCIP Guide - updated version 3-v03.02b; A Recommended Information Report of the Joint Committee on the NTCIP
AASHTO OTS-1-2004 优化系统 Optimizing the system
AASHTO PAR-1-2005 保护美国麓s道路，桥梁，隧道：国家的作用点在国土安全部 Protecting America麓s Roads, Bridges, and Tunnels: The Role of State DOTs in Homeland Security
AASHTO PDDX-1998 路面弯沉数据交换;技术数据指南- 1.0版 Pavement Deflection Data Exchange; Technical Data Guide-Version 1.0
AASHTO PG01-1-2006 维持一个项目文件和拟定一项行政纪录为1 nepa研究 MAINTAINING A PROJECT FILE AND PREPARING AN ADMINISTRATIVE RECORD FOR A NEPA STUDY
AASHTO PG02-1-2006 回应评论对环境影响说明书 RESPONDING TO COMMENTS ON AN ENVIRONMENTAL IMPACT STATEMENT
AASHTO PG03-1-2006 管理nepa过程中收费车道和收费道路 MANAGING THE NEPA PROCESS FOR TOLL LANES AND TOLL ROADS
AASHTO PG04-1-2006 跟踪遵守环保的承诺/使用环境监测 TRACKING COMPLIANCE WITH ENVIRONMENTAL COMMITMENTS / USE OF ENVIRONMENTAL MONITORS
AASHTO PG05-1-2006 利用社区咨询委员会，为nepa研究 UTILIZING COMMUNITY ADVISORY COMMITTEES FOR NEPA STUDIES
AASHTO PG06-2007 医生鈥橲手册咨询根据第106条的国家的历史保存法 PRACTITIONER鈥橲 HANDBOOK CONSULTING UNDER SECTION 106 OF THE NATIONAL HISTORIC PRESERVATION ACT
AASHTO PP-2003 积极的保护-减少风险，保护工人和驾驶人 Positive Protection - Reducing Risk, Protecting Workers and Motorists
AASHTO PP 34-1999 标准做法，估计开裂的趋势，具体 Standard Practice for Estimating the Cracking Tendency of Concrete
AASHTO PP 35-1998 标准做法的评价Superpave的旋回压缩机（ sgcs ） Standard Practice for Evaluation of Superpave Gyratory Compactors (SGCs)
AASHTO PP 37-2004 标准做法determinination的国际平整度指数（以及IRI ）量化粗糙度的行人路 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements
AASHTO PP 37M-1999 标准做法，量化粗糙度的行人路 Standard Practice for Quantifying Roughness of Pavements
AASHTO PP 38-2000 标准做法determinig最高车辙深度的沥青路面 Standard Practice for Determinig Maximum Rut Depth in Asphalt Pavements
AASHTO PP 41-2002 标准做法，设计石基质沥青（形状记忆合金） Standard Practice for Designing Stone Matrix Asphalt (SMA)
AASHTO PP 42-2002 标准做法的决心低温性能等级（ PG ）的沥青粘合剂 Standard Practice for Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders
AASHTO PP 44-2001 标准做法，量化裂缝的沥青路面表面 Standard Practice for Quantifying Cracks in Asphalt Pavement Surface
AASHTO PP 45-2006 标准推荐程序的资格，变形和平原钢筋生产工厂 Standard Recommended Procedure for Qualification of Deformed and Plain Steel Bar Producing Mills
AASHTO PP 46-2001 建议的做法，为土工合成材料reinforement的总结基地的过程中柔性路面结构 Recommended Practice for Geosynthetic Reinforement of the Aggregate Base Course of Flexible Pavement Structure
AASHTO PP 47-2002 标准做法，评价不同的Superpave的旋回压缩机（ sgcs ）用于在设计和现场管理Superpave的混合物 Standard Practice for Evaluation of Different Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures
AASHTO PP 48-2003 标准做法，评价的Superpave的旋回压实（律师）内部的角度回转 Standard Practice for Evaluation of the Superpave Gyratory compactor (SGC) Internal Angle of Gyration
AASHTO PP 49-2003 标准做法认证惯性仿形系统 Standard Practice for Certification of Inertial Profiling Systems
AASHTO PP 50-2003 标准做法，经营惯性廓和评价路面概况 Standard Practice for Operating Inertial Profilers and Evaluating Pavement Profiles
AASHTO PP 51-2003 标准做法，路面行驶品质时，使用惯性测量剖面系统 Standard Practice for Pavement Ride Quality When Measured Using Inertial Profiling Systems
AASHTO PP 53-2006 设计考虑当使用填海沥青油毡瓦在新的沥青混合料 Design Considerations When Using Reclaimed Asphalt Shingles in New Hot-Mix Asphalt
AASHTO PP 54-2006 比赛固化的混凝土试验标本 Match Curing of Concrete Test Specimens
AASHTO PP 55-2006 overcoating田间试验程序，以评估保护涂料对现有桥梁或挽救梁 Overcoating Field Test Program for Evaluating Protective Coatings on Existing Bridges or Salvaged Beams
AASHTO PP 56-2006 评价工程及环境是否适合循环再造物料 Evaluating the Engineering and Environmental Suitability of Recycled Materials
AASHTO PP 57-2006 建立的要求和演艺设备校准，标准化，并检查 Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks
AASHTO PP55-2003 路面行驶品质时，使用惯性测量剖面系统2003年版 Pavement Ride Quality when Measured Using Inertial Profiling System-2003 Edition
AASHTO PS-2006 aashto临时标准 AASHTO Provisional Standards
AASHTO QA-1-1996 质量保证，引导规范 Quality Assurance Guide Specification
AASHTO QIPE-1-2003 指南质量，在前期工程 Guide to Quality in Preconstruction Engineering
AASHTO R 1-2004 标准建议的做法，为利用国际体系中的units-ieee/astm硅10-2002 Standard Recomended Practice for Use of the International System of Units-IEEE/ASTM SI 10-2002
AASHTO R 4-1997 标准建议的做法，为统计程序 Standard Recommended Practice for Statistical Procedures
AASHTO R 5-2003 标准建议的做法，为选拔和使用乳化沥青- ASTM标准： d 3628-01 Standard Recommended Practice for Selection and Use of Emulsified Asphalts-ASTM Designation: D 3628-01
AASHTO R 8-1996 标准建议的做法的评价与运输有关的earthborne振动 Standard Recommended Practice for Evaluation of Transportation-Related Earthborne Vibrations
AASHTO R 9-2005 标准的推荐做法验收抽样计划，为公路建设 Standard Recommended Practice for Acceptance Sampling Plans for Highway Construction
AASHTO R 10-2006 标准建议的做法，为术语的定义相关的质量和统计所用在公路建设 Standard Recommended Practice for Definition of Terms Related to Quality and Statistics As Used in Highway Construction
AASHTO R 11-2006 标准建议的做法说明哪些地方的数字，是要考虑的重大限制在指定的价值观ASTM标准指定：电子29-04 Standard Recommended Practice for Indicating Which Places of Figures Are to Be Considered Significant in Specified Limiting Values-ASTM Designation: E 29-04
AASHTO R 12-1985 标准规格为沥青混合料的设计使用马歇尔和hveem程序 Standard Specifications for Bituminous Mixture Design Using the Marshall and Hveem Procedures
AASHTO R 13-2003 标准规格进行岩土工程的地下调查- ASTM标准： d 420-98 Standard Specification for Conducting Geotechnical Subsurface Investigations-ASTM Designation: D 420-98
AASHTO R 14-1988 标准的推荐做法划分为热回收组合代理商- ASTM标准： d 4552-92 （ 1999 ） Standard Recommended Practice for Classifying Hot-Mix Recycling Agents-ASTM Designation: D 4552-92 (1999)
AASHTO R 15-2000 标准的推荐做法沥青添加剂和改性剂 Standard Recommended Practice for Asphalt Additives and Modifiers
AASHTO R 16-2004 标准建议的做法，为规管工作上的资料为所使用的化学品aashto测试 Standard Recommended Practice for Regulatory Information for Chemicals Used in AASHTO Tests
AASHTO R 18-2006 标准建议的做法，为建立和实施质量体系建设的材料测试实验室 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
AASHTO R 20-1999 标准建议的做法为程序测量高速公路噪音 Standard Recommended Practice for Procedures for Measuring Highway Noise
AASHTO R 21-1996 标准建议的做法，为钻探地下调查，没想到遇到怀疑有害物质 Standard Recommended Practice for Drilling for Subsurface Investigations Unexpectedly Encountering Suspected Hazardous Material
AASHTO R 22-1997 标准的推荐做法退役岩土工程勘探钻孔 Standard Recommended Practice for Decommissioning Geotechnical Exploratory Boreholes
AASHTO R 23-1999 标准建议的做法，为化学，生物和物理分析水 Standard Recommended Practice for Chemical, Biological, and Physical Analysis of Water
AASHTO R 24-1999 标准建议的做法，为收集和保存的水样本 Standard Recommended Practice for Collection and Preservation of Water Samples
AASHTO R 25-2000 标准建议的做法为技术员的培训和资格程序 Standard Recommended Practice for Technician Training and Qualification Programs
AASHTO R 26-2001 标准建议的做法，为证明供应商的表现分级沥青粘合剂 Standard Recommended Practice for Certifying Suppliers of Performance-Graded Asphalt Binders
AASHTO R 27-2001 标准建议的做法进行评估腐蚀的钢桩非海洋应用 Standard Recommended Practice for Assessment of Corrosion of Steel Piling for Non-Marine Applications
AASHTO R 28-2006 标准做法，加速老化的沥青结合料使用加压老化容器（ pav ） Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
AASHTO R 29-2002 标准做法，等级或核实的表现，等级1沥青粘结剂 Standard Practice for Grading or Verifying the Performance Grade of an Asphalt Binder
AASHTO R 30-2002 标准做法，混合空调的沥青混合料（人道主义排雷） Standard Practice for Mixture Conditioning of Hot-Mix Asphalt (HMA)
AASHTO R 31-2006 标准做法的评价镀膜系统与富锌底漆 Standard Practice for Evaluation of Coating Systems with Zinc-Rich Primers
AASHTO R 32-2003 标准的推荐做法校准负荷单元和挠度传感器为落锤deflectormeter Standard Recommended Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectormeter
AASHTO R 33-2003 标准建议的做法为calbrating参考负荷细胞用于落锤式弯沉 Standard Recommended Practice for Calbrating the Reference Load Cell Used for Falling Weight Deflectometer
AASHTO R 34-2003 标准建议的做法的评价除冰化学品 Standard Recommended Practice for Evaluating Deicing Chemicals
AASHTO R 35-2004 标准做法， Superpave的体积设计沥青混合料（人道主义排雷） Standard Practice for Superpave Volumetric Design for Hot-Mix Asphalt (HMA)
AASHTO R 36-2004 标准做法，评估断层的水泥混凝土路面 Standard Practice for Evaluating Faulting of Concrete Pavements
AASHTO R 37-2004 标准建议的做法，为应用地面穿透雷达（ GPR的公路 Standard Recommended Practice for Application of Ground Penetrating Radar (GPR to Highways
AASHTO R 38-2004 标准做法的质量保证标准制造的材料 Standard Practice for Quality Assurance of Standard Manufactured Materials
AASHTO R 39-2005 标准的做法，为决策和养护混凝土试验标本，在实验室里- ASTM标准的指定中： C 192 /炭192米- 02 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory-ASTM Designation: C 192/C 192M-02
AASHTO R 40-2005 标准做法，测量路面的个人资料使用控制棒和水平 Standard Practice for Measuring Pavement Profile Using a Rod and Level
AASHTO R 41-2005 标准做法，测量路面的个人资料使用试纸 Standard Practice for Measuring Pavement Profile Using a Dipstick
AASHTO R 42-2006 标准做法，制定一个质量保证计划，为沥青混合料（人道主义排雷） Standard Practice for Developing a Quality Assurance Plan for Hot-Mix Asphalt (HMA)
AASHTO RB-2007 aashto参考书籍;会员署人员及委员会 AASHTO Reference Book; Member Department Personnel and Committees
AASHTO RRUT-1-1989 报告对aashto联合专责小组，车辙 Report of the AASHTO Joint Task Force On Rutting
AASHTO RSDG-3-2002 路边设计指南-附录A修订;勘误表： 12/2004 Roadside Design Guide-Appendix A Revision; Errata: 12/2004
AASHTO RSDG CHAPTER 6-2006 路边设计指南第六章更新 Roadside Design Guide Chapter Six Update
AASHTO SBB-1-2005 钢桥轴承的设计和详细的指引版1 Steel Bridge Bearing Design and Detailing Guidelines-Edition 1
AASHTO SBCS-1-2002 指南规格镀膜系统与无机富锌底漆-a ashto/ n sba钢桥协作- S的8 .1-2002 Guide Specification for Coating Systems with Inorganic Zinc-Rich Primer - AASHTO/NSBA Steel Bridge Collaboration-S 8.1-2002
AASHTO SBF-1-2002 钢桥制造规范指南 Steel Bridge Fabrication Guide Specification
AASHTO SBFQC-1-2002 钢桥制造质量控制/质量保证指南规格 Steel Bridge Fabrication QC/QA Guide Specification
AASHTO SCCA-1997 分流的原因及对策沥青混合料 Segregation Causes and Cures for Hot Mix Asphalt
AASHTO SDDP-1-2002 店详图介绍指引 Shop Detail Drawing Presentation Guidelines
AASHTO SDDRAG-1-2000 店详图审查/审批指引 Shop Detail Drawing Review/Approval Guidelines
AASHTO SDMS-1-2000 aashto sdms技术数据指南2000年运输工程数据交换和存档 AASHTO SDMS Technical Data Guide 2000 for Transportation Engineering Data Exchange and Archive
AASHTO SDTB-1-1985 指南的规格，强度设计桁架桥（负荷因素设计）修订的百分之临时规格-1 986年 Guide Specifications for Strength Design of Truss Bridges (Load Factor Design)-Revised per Interim Specification - 1986
AASHTO SFR-2004 安全经费资源：参考指南，为国家的交通运输机构-最后报告 Security Funding Resources: A Reference Guide for State Transportation Agencies - FINAL REPORT
AASHTO SHSP-2-2005 aashto战略公路安全计划-第二版 AASHTO Strategic Highway Safety Plan-Edition 2
AASHTO SIPT-98-1998 统计调查结果显示，在参与国家的公共交通 Survey of State Involvement in Public Transportation
AASHTO SLCW-2006 东南亚当地的谘询研讨会-研讨会的报告对非都会地方协商，为美国东南部的1 2个国家 Southeast Local Consultation Workshop - Report of a workshop on non-metropolitan local consultation for the 12 southeastern U.S. states
AASHTO SLWD-1991 指南规格的设计应力层压木质甲板 Guide Specifications for the Design of Stress-Laminated Wood Decks
AASHTO SMC-1-2002 聪明的举动：交通运输战略的智能增长， 2002年竞争 SMART MOVES: TRANSPORTATION STRATEGIES FOR SMART GROWTH 2002 COMPETITION
AASHTO SMC-2-2004 最佳做法在智能交通运输的增长和2004年的竞争 Best Practices in Smart Growth and Transportation 2004 COMPETITION
AASHTO SP-1-2005 2005-2010年战略计划是aashto的声音，为运输和催化剂的组织和技术卓越。 STRATEGIC PLAN 2005-2010 AASHTO is the voice for transportation and catalyst for organizational and technical excellence.
AASHTO SR-3-1997 公路安全设计与操作指南 Highway Safety Design and Operations Guide
AASHTO SRA-3-2001 指导发展的休息区，对重大arterials和高速公路-第三版 Guide for Development of Rest Areas on Major Arterials and Freeways-Third Edition
AASHTO SS-2006 aashto薪金调查 AASHTO Salary Survey
AASHTO SSLF-2003 美国国家公路安全论坛;诉讼 National Highway Safety Forum; Proceedings
AASHTO T 2-1991 标准方法测试取样的总量-陛下- 22 ;第IIA部; ASTM标准指定d 75-87 （ 1992 ）素E1 Standard Method of Test for Sampling of Aggregates-HM-22; Part IIA; ASTM Designation D 75-87(1992)E1
AASHTO T 11-2005 标准方法试验的材料精细的超过75 -嗯（第200号）筛在矿物料洗ASTM标准的指定中： C 117-03 Standard Method of Test for Materials Finer Than 75-um (No. 200) Sieve in Mineral Aggregates by Washing-ASTM Designation: C 117-03
AASHTO T 19M/T 19-2000 标准方法测试容重（单位重量）和空隙在总结- ASTM标准的指定中： C 29 /炭二十九米- 97 （ 2003 ） Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate-ASTM Designation: C 29/C 29M-97 (2003)
AASHTO T 21-2005 标准方法测试有机杂质在精细总量混凝土ASTM标准的指定中： C 40-04 Standard Method of Test for Organic Impurities in Fine Aggregates for Concrete-ASTM Designation: C 40-04
AASHTO T 22-2006 标准方法测试抗压强度筒混凝土标本- ASTM标准的指定中： C 39 - 04a Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens-ASTM Designation: C 39-04a
AASHTO T 23-2004 标准方法试验的决策和养护混凝土试验标本在外地ASTM标准的指定中： C 31 - 03a Standard Method of Test for Making and Curing Concrete Test Specimens in the Field-ASTM Designation: C 31-03a
AASHTO T 24-2005 标准方法测试获取和测试钻孔岩心和sawed梁混凝土ASTM标准的指定中： C 42-04 Standard Method of Test for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete-ASTM Designation: C 42-04
AASHTO T 26-1979 标准方法测试水的质量，以便用于混凝土 Standard Method of Test for Quality of Water to Be Used in Concrete
AASHTO T 30-2006 标准方法试验的力学分析中提取总计 Standard Method of Test for Mechanical Analysis of Extracted Aggregate
AASHTO T 32-2005 标准方法检验的采样和测试砖混ASTM标准的指定中： C 67 - 03a Standard Method of Test for Sampling and Testing Brick-ASTM Designation: C 67-03a
AASHTO T 37-2006 标准方法试验筛分析矿物填料为沥青混合料-美国ASTM指定d 546-99 （ 2005 ） Standard Method of Test for Sieve Analysis of Mineral Filler for Hot-Mix Asphalt-ASTM Designation D 546-99(2005)
AASHTO T 40-2002 标准方法测试取样沥青材料陛下- 22 ;第IIA部; ASTM标准指定d 140-00 Standard Method of Test for Sampling Bituminous Materials-HM-22; Part IIA; ASTM Designation D 140-00
AASHTO T 42-2001 标准方法测试预制伸缩缝填充混凝土施工-美国ASTM指定d 545-99 Standard Method of Test for Preformed Expansion Joint Filler for Concrete Construction-ASTM Designation D 545-99
AASHTO T 44-2003 标准方法试验的溶解度沥青材料ASTM标准指定d 2042-01 Standard Method of Test for Solubility of Bituminous Materials-ASTM Designation D 2042-01
AASHTO T 48-2006 标准方法测试Flash和消防点，由克里夫兰开放杯ASTM标准： d 92 - 05a Standard Method of Test for Flash and Fire Points by Cleveland Open Cup-ASTM Designation: D 92-05a
AASHTO T 49-2006 标准方法测试渗透沥青材料ASTM标准： d 5 - 05a Standard Method of Test for Penetration of Bituminous Materials-ASTM Designation: D 5-05a
AASHTO T 50-1999 标准方法测试浮法测试沥青材料ASTM标准指定d 139-95 （ 2001 ）素E1 Standard Method of Test for Float Test for Bituminous Materials-ASTM Designation d 139-95 (2001)e1
AASHTO T 51-2006 标准方法测试延性的沥青材料ASTM标准： d 113-99 Standard Method of Test for Ductility of Bituminous Materials-ASTM Designation: D 113-99
AASHTO T 53-2006 标准的方法，测试软化点沥青（环和球器具） - ASTM标准： d 36-95 （ 2000 ）素E1 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)-ASTM Designation: D 36-95 (2000)e1
AASHTO T 55-2002 标准方法测试水在石油产品及沥青材料的蒸馏陛下- 22 ;第IIA部; ASTM标准指定d 95-99 Standard Method of Test for Water in Petroleum Products and Bituminous Materials by Distillation-HM-22; Part IIA; ASTM Designation D 95-99
AASHTO T 59-2001 标准的测试方法进行测试，乳化沥青-陛下- 22 ;第IIA部; ASTM标准指定d 244-95 Standard Method of Test for Testing Emulsified Asphalts-HM-22; Part IIA; ASTM Designation D 244-95
AASHTO T 62-1986 标准方法试验蒸馏creosote和creosote煤焦油解决方案- ASTM标准： d 246-89 Standard Method of Test for Distillation of Creosote and Creosote Coal Tar Solutions-ASTM Designation: D 246-89
AASHTO T 65M/T 65-2006 标准方法测试为群众[重量]涂层对钢铁的文章与锌或锌合金镀层- ASTM标准： 90 / 1九零米- 01 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings-ASTM Designation: A 90/A 90M-01
AASHTO T 67-2005 标准方法测试的标准做法，为部队的核查试验机-美国ASTM指定：电子4月3日 Standard Method of Test for Standard Practices for Force Verification of Testing Machines-ASTM Designation: E 4-03
AASHTO T 68-2005 标准方法测试拉伸试验的金属材料ASTM标准指定：电子8月4日 Standard Method of Test for Tension Testing of Metallic Materials-ASTM Designation: E 8-04
AASHTO T 68M-2005 标准方法测试拉伸试验金属材料[公制] -美国ASTM指定：电子8米- 04 Standard Method of Test for Tension Testing of Metallic Materials [Metric]-ASTM Designation: E 8M-04
AASHTO T 70-2006 标准方法测试布氏硬度的金属材料ASTM标准指定：电子商务10月1日 Standard Method of Test for Brinell Hardness of Metallic Materials-ASTM Designation: E 10-01
AASHTO T 71-1993 标准的方法，测试效果的有机杂质，细集料对砂浆强度-美国ASTM指定c 87-83 （ 1995 ） Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar-ASTM Designation C 87-83(1995)
AASHTO T 72-1997 标准方法测试Saybolt的粘度-陛下- 22 ;第IIA部; ASTM标准指定d 88-94段（ 1999 ） Standard Method of Test for Saybolt Viscosity-HM-22; Part IIA; ASTM Designation D 88-94(1999)
AASHTO T 78-2005 标准方法试验蒸馏削减沥青（沥青）产品- ASTM标准： d 402-02 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products-ASTM Designation: D 402-02
AASHTO T 79-1996 标准方法测试闪点与标记开放式杯器具使用的材料有闪光不少于93.3摄氏（华氏200 ） Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3 Celsius (200 Fahrenheit)
AASHTO T 80-2006 标准方法测试洛氏硬度和表面洛氏硬度的金属材料ASTM标准指定：电子18-05 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials-ASTM Designation: E 18-05
AASHTO T 84-2000 标准的方法，测试的具体的严重性和吸收细骨料- ASTM标准的指定中： C 128-97 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate-ASTM Designation: C 128-97
AASHTO T 85-1991 标准的方法，测试的具体的严重性和吸收粗骨料- ASTM标准的指定中： C 127-88 （ 1993 ） Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate-ASTM Designation: C 127-88 (1993)
AASHTO T 87-1986 标准方法试验干法制备不安的土壤和土壤团粒样本进行测试 Standard Method of Test for Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test
AASHTO T 88-2000 标准方法测试粒度分析土壤 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 89-2002 标准方法测试定液限土-陛下- 22 ;第IIA部 Standard Method of Test for Determining the Liquid Limit of Soils-HM-22; Part IIA
AASHTO T 90-2000 标准方法试验确定的塑性极限和塑性指数的土壤 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 92-1997 标准方法测试定收缩因素的土壤-陛下- 22 ;第IIA部 Standard Method of Test for Determining the Shrinkage Factors of Soils-HM-22; Part IIA
AASHTO T 96-2002 标准方法测试抗退化的小规模粗骨料由磨损和影响，在洛杉矶，机陛下- 22 ;第IIA部; ASTM标准指定c 131-01 Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine-HM-22; Part IIA; ASTM Designation C 131-01
AASHTO T 97-2003 标准方法测试抗弯强度的混凝土（使用简支梁与第三点加载） -美国ASTM指定c 78-02 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)-ASTM Designation C 78-02
AASHTO T 98-1999 标准方法测试细波特兰水泥由浊度- ASTM标准的指定中： C 115 - 96a Standard Method of Test for Fineness of Portland Cement by the Turbidimeter-ASTM Designation: C 115-96a
AASHTO T 99-2001 标准方法测试水分密度的关系，土壤中使用了2.5公斤（ 5.5磅）夯和305毫米（ 12 -在。 ）下降 Standard Method of Test for the Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 100-2006 标准的方法，测试的具体的严重性，土壤- ASTM标准： d 854-00 Standard Method of Test for Specific Gravity of Soils-ASTM Designation: D 854-00
AASHTO T 102-1983 标准方法测试现场测试沥青材料 Standard Method of Test for Spot Test of Asphaltic Materials
AASHTO T 103-1991 标准方法试验的稳健料冻结及解冻 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
AASHTO T 104-1999 标准方法试验的稳健性总结用硫酸钠或硫酸镁 Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
AASHTO T 105-2006 标准方法测试进行化学分析的液压水泥ASTM标准的指定中： C 114-05 Standard Method of Test for Chemical Analysis of Hydraulic Cement-ASTM Designation: C 114-05
AASHTO T 106M/T 106-2004 标准方法测试抗压强度的液压水泥砂浆（用50毫米或2 -在。立方体标本） -美国ASTM指定c 109 /炭一〇九米- 02 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)-ASTM Designation C 109/C 109M-02
AASHTO T 107-2003 标准方法试验釜扩大波特兰水泥- ASTM标准的指定中： C 151-00 Standard Method of Test for Autoclave Expansion of Portland Cement-ASTM Designation: C 151-00
AASHTO T 110-2003 标准方法测试水分或挥发馏分在沥青铺路混合物- ASTM标准： d 1461年至1485年 Standard Method of Test for Moisture or Volatile Distillates in Bituminous Paving Mixtures-ASTM Designation: D 1461-85
AASHTO T 111-1983 标准方法测试无机事项或粉煤灰在沥青材料 Standard Method of Test for Inorganic Matter or Ash in Bituminous Materials
AASHTO T 112-2000 标准方法测试粘土肿块和易碎颗粒在总结- ASTM标准的指定中： C 142-97 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate-ASTM Designation: C 142-97
AASHTO T 113-2006 标准方法测试轻件在总结- ASTM标准的指定中： C 123-03 Standard Method of Test for Lightweight Pieces in Aggregate-ASTM Designation: C 123-03
AASHTO T 119M/T 119-2005 标准方法测试低迷，液压水泥混凝土- ASTM标准的指定中： C 143 /炭一百四十三米- 03 Standard Method of Test for Slump of Hydraulic Cement Concrete-ASTM Designation: C 143/C 143M-03
AASHTO T 121M/T 121-2005 标准方法测试密度（单位重量） ，产量，和空气含量（重量）混凝土ASTM标准的指定中： C 138 /炭一百三十八米- 01a Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete-ASTM Designation: C 138/C 138M-01a
AASHTO T 127-2004 标准方法测试取样和测试的数额液压水泥ASTM标准的指定中： C 183-02 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement-ASTM Designation: C 183-02
AASHTO T 128-1997 标准方法测试细液压水泥由150 -嗯（第100号）和75 -嗯（第200号）分子筛-陛下- 22 ;第IIA部; ASTM标准的指定中： C 184-94 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves-HM-22; Part IIA; ASTM Designation: C 184-94
AASHTO T 129-2006 标准方法测试正常的一致性，液压水泥ASTM标准的指定中： C 187-04 Standard Method of Test for Normal Consistency of Hydraulic Cement-ASTM Designation: C 187-04
AASHTO T 131-2006 标准的方法，测试时间定液压水泥维卡针ASTM标准的指定中： C 191 - 04a Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle-ASTM Designation: C 191-04a
AASHTO T 132-1987 标准方法测试拉伸强度液压水泥砂浆 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars
AASHTO T 133-1998 标准规格的测试密度的液压水泥ASTM标准的指定中： C 188-95 Standard Specification of Test for Density of Hydraulic Cement-ASTM Designation: C 188-95
AASHTO T 134-2005 标准方法测试水分密度的关系，水泥土的混合物 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
AASHTO T 135-1997 标准方法测试润湿和干燥试验压实水泥土的混合物 Standard Method of Test for Wetting-and-Drying Test of Compacted Soil-Cement Mixtures
AASHTO T 136-1997 标准方法测试冻结和解冻的考验，压缩水泥土的混合物 Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures
AASHTO T 137-2004 标准方法测试空气的内容，液压水泥砂浆- ASTM标准的指定中： C 185-02 Standard Method of Test for Air Content of Hydraulic Cement Mortar-ASTM Designation: C 185-02
AASHTO T 140-1997 标准方法测试混凝土抗压强度使用的部分，梁打破了柔性 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
AASHTO T 141-2005 标准方法测试取样新鲜预拌混凝土- ASTM标准的指定中： C 172-04 Standard Method of Test for Sampling Freshly Mixed Concrete-ASTM Designation: C 172-04
AASHTO T 143-2004 标准方法检验的采样和测试氯化钙道路及结构的应用- ASTM标准： d 345-02 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications-ASTM Designation: D 345-02
AASHTO T 146-1996 标准方法测试湿法制备不安的土壤样品进行化验， Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
AASHTO T 148-1997 标准方法测试测量长度的混凝土钻芯-美国ASTM指定中： C 174-87 Standard Method of Test for Measuring Length of Drilled Concrete Cores-ASTM Designation: C 174-87
AASHTO T 151-1981 标准的测试方法进行测试，干燥油- ASTM标准： d 555-84 （ 1998 ） Standard Method of Test for Testing Drying Oils-ASTM Designation: D 555-84 (1998)
AASHTO T 152-2005 标准方法测试空气新鲜的内容，预拌混凝土，由压力的方法- ASTM标准的指定中： C 231-03 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method-ASTM Designation: C 231-03
AASHTO T 153-2002 标准方法测试细液压水泥透气性器具-陛下- 22 ;第IIA部; ASTM标准的指定中： C 204-00 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus-HM-22; Part IIA; ASTM Designation: C 204-00
AASHTO T 154-2006 标准的方法，测试时间定液压水泥石gillmore针- ASTM标准的指定中： C 266-04 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles-ASTM Designation: C 266-04
AASHTO T 155-2005 标准方法测试保水混凝土固化材料- ASTM标准的指定中： C 156-03 Standard Method of Test for Water Retention by Concrete Curing Materials-ASTM Designation: C 156-03
AASHTO T 157-2006 标准方法测试空气- entraining外加剂混凝土ASTM标准的指定中： C 233-04 Standard Method of Test for Air-Entraining Admixtures for Concrete-ASTM Designation: C 233-04
AASHTO T 158-2005 标准方法测试出血的混凝土ASTM标准的指定中： C 232-99 Standard Method of Test for Bleeding of Concrete-ASTM Designation: C 232-99
AASHTO T 160-1997 标准方法测试长度变化硬化液压水泥砂浆和混凝土的ASTM标准的指定中： C 157-93 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete-ASTM Designation: C 157-93
AASHTO T 161-2005 的标准方法测试，为抵抗混凝土快速冻结和解冻- ASTM标准的指定中： C 666 /炭六六六米- 03 Standard Method of Test for Resistance of Concrete to Rapid Freezing and Thawing-ASTM Designation: C 666/C 666M-03
AASHTO T 162-2004 标准方法测试机械搅拌液压水泥浆体和迫击炮的塑胶一致性ASTM标准的指定中： C 305 - 99e1 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency-ASTM Designation: C 305-99e1
AASHTO T 164-2006 标准方法测试定量提取沥青粘结剂由沥青混合料（人道主义排雷） ASTM标准： d 2172-01 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)-ASTM Designation: D 2172-01
AASHTO T 165-2002 标准方法试验的影响水对中华民族的凝聚力压实沥青混合料-陛下- 22 ;第IIA部; ASTM标准： d 1075年至1096年 Standard Method of Test for Effect of Water on Cohesion of Compacted Bituminous Mixtures-HM-22; Part IIA; ASTM Designation: D 1075-96
AASHTO T 167-2005 标准方法测试抗压强度的沥青混合料 Standard Method of Test for Compressive Strength of Hot-Mix Asphalt
AASHTO T 168-2003 标准方法测试取样沥青铺路混合物- ASTM标准： d 979-01 Standard Method of Test for Sampling Bituminous Paving Mixtures-ASTM Designation: D 979-01
AASHTO T 176-2002 标准方法测试塑料的罚款额，分级碎石和土壤中使用的砂当量试验陛下- 22 ;第IIA部 Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test-HM-22; Part IIA
AASHTO T 177-2003 标准方法测试抗弯强度的混凝土（使用简支梁与中心点加载） - ASTM标准的指定中： C 293-02 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)-ASTM Designation: C 293-02
AASHTO T 178-1997 标准的方法，测试的内容水泥硬化波特兰水泥混凝土- ASTM标准的指定中： C 1084年至1092年 Standard Method of Test for Cement Content of Hardened Portland Cement Concrete-ASTM Designation: C 1084-92
AASHTO T 179-2005 标准方法测试，换热效果和空气对沥青材料（采用薄膜烘箱试验） ASTM标准： d 1754年至1797年（ 2002 ） Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)-ASTM Designation: D 1754-97 (2002)
AASHTO T 180-2001 标准方法测试水分密度的关系，土壤中使用4.54公斤（ 10磅）夯和457毫米（ 18 -在。 ）下降 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 182-1984 标准方法测试涂层和剥离沥青骨料的混合物-美国ASTM指定d 1664年至1680年 Standard Method of Test for Coating and Stripping of Bitumen-Aggregate Mixtures-ASTM Designation D 1664-80
AASHTO T 185-2006 标准方法试验的早期僵硬液压水泥（砂浆法） ASTM标准的指定中： C 359-04 Standard Method of Test for Early Stiffening of Hydraulic Cement (Mortar Method)-ASTM Designation: C 359-04
AASHTO T 186-2006 标准方法试验的早期僵硬液压水泥（粘贴的方法） - ASTM标准的指定中： C 451 - 04a Standard Method of Test for Early Stiffening of Hydraulic Cement (Paste Method)-ASTM Designation: C 451-04a
AASHTO T 188-2005 标准的方法，测试评价，冻结和解冻的空气- entraining加液压水泥 Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement
AASHTO T 190-2002 标准方法测试阻力R值和扩张的压力，压实土壤-陛下- 22 ;第IIA部; ASTM标准： d 2844-69 （ 1975 ） Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils-HM-22; Part IIA; ASTM Designation: D 2844-69(1975)
AASHTO T 191-2002 标准方法测试密度的土壤就地由沙锥方法 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 192-1999 标准方法测试细液压水泥由45 -嗯（ 325号）筛-美国ASTM指定c 430-96 Standard Method of Test for Fineness of Hydraulic Cement by the 45-um (No. 325) Sieve-ASTM Designation C 430-96
AASHTO T 193-1999 标准方法测试，为加州承载比 Standard Method of Test for the California Bearing Ratio
AASHTO T 194-1997 标准方法试验测定中有机质的土壤湿燃烧 Standard Method of Test for Determination of Organic Matter in Soils by Wet Combustion
AASHTO T 195-1967 标准方法测试定程度的颗粒包覆沥青骨料的混合物-美国ASTM d2489 - 67 （ 1980 ） Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures-ASTM D2489-67(1980)
AASHTO T 196M/T 196-2005 标准方法测试空气新鲜的内容，预拌混凝土，由容积法-美国ASTM指定的ASTM标准c 173 /炭一百七十三米- 01 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method-ASTM Designation ASTM C 173/C 173M-01
AASHTO T 197M/T 197-2005 标准的方法，测试的时间设定具体的混合物贯入阻力-美国ASTM指定的ASTM标准c 403 /炭四百〇三米- 99 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance-ASTM Designation ASTM C 403/C 403M-99
AASHTO T 198-2002 标准方法测试劈拉强度的混凝土圆柱标本-陛下- 22 ;第IIA部; ASTM标准指定c 496-96 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens-HM-22; Part IIA; ASTM Designation C 496-96
AASHTO T 199-2000 标准方法测试空气新鲜的内容，预拌混凝土由chace指标 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Chace Indicator
AASHTO T 200-1979 标准方法测试pH值的水溶液中，与玻璃电极-美国ASTM指定e 70-97 Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode-ASTM Designation E 70-97
AASHTO T 201-2003 标准方法试验的运动粘度沥青（沥青） -美国ASTM指定d 2170 - 01a Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)-ASTM Designation D 2170-01a
AASHTO T 202-2003 的标准方法测试粘度沥青真空毛细管粘度计-美国ASTM指定d 2171-01 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer-ASTM Designation D 2171-01
AASHTO T 206-2003 标准方法试验贯入试验和分裂桶采样土壤-美国ASTM指定d 1586年至1599年 Standard Method of Test for Penetration Test and Split-Barrel Sampling of Soils-ASTM Designation D 1586-99
AASHTO T 207-2003 标准方法测试薄薄壁管采样土壤-美国ASTM指定d 1587年至1500年 Standard Method of Test for Thin-Walled Tube Sampling of Soils-ASTM Designation D 1587-00
AASHTO T 208-2005 标准方法测试无侧限抗压强度粘性土-美国ASTM指定d 2166-00 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil-ASTM Designation D 2166-00
AASHTO T 209-2005 标准的方法，测试的理论最高具体的严重性和密度的沥青混合料铺路混合物 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt Paving Mixtures
AASHTO T 210-2005 标准方法试验总结耐久性指数ASTM标准指定d 3744-03 Standard Method of Test for Aggregate Durability Index-ASTM Designation D 3744-03
AASHTO T 211-1990 标准方法试验的决心，水泥含量在水泥治疗总结，该方法的滴定 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration
AASHTO T 213M/T 213-2003 标准方法测试为群众[重量]涂层对铝包铁或钢的文章-美国ASTM指定一428 /一四二八米- 01 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles-ASTM Designation A 428/A 428M-01
AASHTO T 215-1970 标准方法测试渗透土壤颗粒（不断头） -美国ASTM 2434-68 （ 1994 ）素E1 Standard Method of Test for Permeability of Granular Soils (Constant Head)-ASTM 2434-68(1994)E1
AASHTO T 216-2003 标准方法测试的一维固结性能的土壤-美国ASTM指定d 2435-90 Standard Method of Test for One-Dimensional Consolidation Properties of Soils-ASTM Designation D 2435-90
AASHTO T 217-2002 标准的测试方法测定土壤中水分的方法一电石气体压力水分测试仪-陛下- 22 ;的一部分，第IIB Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester-HM-22; Part IIB
AASHTO T 218-1986 标准方法测试取样熟石灰 Standard Method of Test for Sampling Hydrated Lime
AASHTO T 219-1987 标准的测试方法进行测试，石灰的化学成分和颗粒大小 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
AASHTO T 220-1966 的标准方法试验测定的力量，土壤-石灰的混合物 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures
AASHTO T 221-1990 标准方法试验重复静态载荷试验的土壤和柔性路面组件的使用在评价和设计的机场和公路的行人路- ASTM标准： d 1195年至1193年（ 1997年） Standard Method of Test for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements-ASTM Designation: D 1195-93(1997)
AASHTO T 222-1981 的标准方法测试nonrepetitive静态载荷试验的土壤和柔性路面组件，用于在评价和设计的机场和公路的行人路 Standard Method of Test for Nonrepetitive Static Plate Load Test of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
AASHTO T 223-1996 标准方法测试领域的叶片剪切试验在粘性土 Standard Method of Test for Field Vane Shear Test in Cohesive Soil
AASHTO T 224-2001 标准方法测试校正粗颗粒，在土壤压实测试 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 225-2006 标准方法测试钻石钻探，为实地调查 Standard Method of Test for Diamond Core Drilling for Site Investigation
AASHTO T 226-1990 标准方法测试三轴抗压强度不排水岩芯标本，没有孔隙压力测量- ASTM标准： d 2664-99 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements-ASTM Designation: D 2664-99
AASHTO T 227-2002 标准方法测试密度，相对密度（比重） ，或空气污染指数的严重性，原油和液体石油产品hydrometer方法-陛下- 22 ;的一部分，独立调查委员会; ASTM标准d 1298年至1299年 Standard Method of Test for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-HM-22; PART IIB; ASTM D 1