畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/EIA 520EAAC-1990 双列直插式开关详细规范 Detail Specification for Dual-In-Line Switches
ANSI/EIA 520EAAD-1990 升降滑动驱动的双列式封装开关详细规范 Detail Specification on Dual-In-Line Package Switches, Raised and Recessed Slide-Actuated
ANSI/EIA 520F000-A-1996 已质量认证的旋转式开关分规范(2安培或以下的低电流) Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)
ANSI/EIA 520FA00-1992 已质量认证的专用旋转式开关空白详细规范 Blank Detail Specification for Special-Use Rotary Switches of Certified Quality
ANSI/EIA 520FAAA-1995 已质量认证的(低电流)最大12位置的旋转式开关的详细规范 Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum
ANSI/EIA 520FAAB-1995 已质量认证的(低电流)最大16位置的旋转式开关的详细规范 Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum
ANSI/EIA-520E000-A-2000 质量认证的直插式开关的分规范 Sectional Specification for In-Line Switches of Certified Quality
ANSI/EIA-520FA00-1992 已获得质量认证的专用旋转式开关的空白详细规范 Blank Detail Specification for Special-Use Rotary Switches of Certified Quality
ANSI/UL 1699-2007 电弧故障电路断流器用安全标准 Standard for Safety for Arc-Fault Circuit-Interrupters (Bulletin dated December 16, 2005)
ANSI/EIA 280-C-1992 无焊绕接电连接件 Solderless Wrapped Electrical Connections
ANSI/EIA 364-104A-2000 电连接器的易燃性试验程序 Flammability Test Procedure for Electrical Connectors
ANSI/EIA 364-78A-2002 新试验程序*78.电连接器的腔间泄漏接合完整性试验程序 New Test Procedure *78, Cavity-to-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
ANSI/EIA 406-1973 印制电路板的电连接器 Connectors, Electrical, Printed-Wiring Board
ANSI/EIA 5400000-A-1996 电子设备用集成线路插件用插孔的一般规范 Generic Specification for Sockets for Integrated Circuit (IC) Packages for Use in Electronic Equipment
ANSI/EIA 540A000-A-1990 用于电子设备的片载插孔的分规范 Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment
ANSI/EIA 540AA00-1991 电子设备用无引线A、B、D型片载体用片载插座的空白详细规范 Chip Carrier Sockets for Leadless type A,B,D Chip Carriers for use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540AAAA-1990 电子设备用无引线A型1.27mm(0.50英寸)间隙接线片插孔的详细规范 Chip Carrier Sockets for Leadless Type A 1.27 mm (.050") Spacing Chip Carriers for Use in Electronic Equipment
ANSI/EIA 540AB00-1991 电子设备用塑料方形扁平组件的片载插座的空白详细规范 Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540ABAA-1991 引线间隙为0.635mm(0.25英寸)的塑料方形平接头用片载插孔的详细规范 Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing)
ANSI/EIA 540AC00-1991 嬵譐妾甇("J"型引线塑料片载体(PCC)组件的片载插座的空白详细规范 Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540ACAA-1991 引线间隙为1.27mm(0.50英寸)的塑料片载(PCC)系列的片载插孔的详细规范 Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for
ANSI/EIA 540AD00-1991 电子设备用针式格子排列插座的适配器载体方形扁平外壳的详细规范 Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540ADAA-1992 电子设备用针状格子排列插孔的适配器-载体方形平接头的详细规范 Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for
ANSI/EIA 540B000-1989 电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针格子排列装置的分规范 Sectional Specification for Sockets for Pin-Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA 540B0AA-2001 用于电子设备有1.27mm间距的BGA插座的详细规范 Detail Specification for Production Ball Grid Array (BGA) Sockets with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment
ANSI/EIA 540BA00-1990 电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针式格子排列装置插孔的空白详细规范 Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA 540BAAA-A-1996 详细规范:用于电子设备的2.54mmX2.55mm间距针式格子排列装置的（零和低插入力）机械启动插孔 Detail Specification: Mechanically Actuated (Zero and Low Insertion Force) Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA 540BAAB-1990 电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针状格子排列器件用非机械推动插孔 Non-Mechanically Activated Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA 540BAAC-1990 电子设备用针式格子排列的非机械推动挠性载体插孔的详细规范 Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment, Detail Specification for
ANSI/EIA 540C000-1988 电子设备用继电器插孔的分规范 Sectional Specification for Sockets for Relays for Use in Electronic Equipment
ANSI/EIA 540CA00-1989 继电器插孔的空白详细规范 Blank Detail Specification on Relay Sockets
ANSI/EIA 540CAAA-1989 平衡衔铁继电器用10A插孔的详细规范 Detail Specification on Relay Sockets - 10A for Balanced Armature Relay
ANSI/EIA 540CAAB-1989 平衡衔铁继电器用5A插孔的详细规范 Detail Specification for Relay Sockets - 5A for Balanced Armature Relay
ANSI/EIA 540CAAC-1990 双极10安继电器插孔的详细规范 Detail Specification for 2-Pole 10A Relay Sockets
ANSI/EIA 540CAAD-A-1999 2销 5A 继电器插孔的详细规范 Detail Specification for 2-Pole, 5A Relay Sockets
ANSI/EIA 540CAAE-A-1999 3销 10A 继电器插孔的详细规范 Detail Specification for 3-Pole 10A Relay Sockets
ANSI/EIA 540D000A-1991 电子设备用直插式组件插孔的分规范 In-Line Package Sockets for Use in Electronic Equipment, Sectional Specification for
ANSI/EIA 540D0AA-A-1991 双列直插式组件插孔规范 Dual-In-Line Package Sockets, Specification for
ANSI/EIA 540DA00-1991 电子设备用双排标准组合插件插孔的空白详细规范 Dual-In-Line Package Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540DAAA-A-1993 电子设备用双列直插式2片接触式插孔的详细规范 Detail Specification for Dual-in-Line 2-Piece Contact Socket for Use in Electronic Equpiment
ANSI/EIA 540DAAB-1991 用于电子设备的柔性二片式双列直插式插孔的详细规范 Detail Specification for Flexible Carrier 2-Piece Dual-In-Line Socket for Use in Electronic Equipment
ANSI/EIA 540E000-1992 圆形插孔的分规范 Sectional Specification for Round Style Sockets
ANSI/EIA 540EA00-1997 圆形插孔的空白详细规范 Blank Detail Specification for Round Style Sockets
ANSI/EIA 540EAAA-1997 圆形插孔的详细规范 Detail Specification for Round Style Sockets
ANSI/EIA 540F000-1991 电子设备用多组组合插座的分规范 Multi-Package Module Sockets for Use in Electronic Equipment, Sectional Specification for
ANSI/EIA 540FAAA-1992 电子设备用间距100密耳多插件垂直安装格式模块化插孔的详细规范 Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA 540FAAB-1992 电子设备用间距100密耳的多插件成角度安装格式模块化插孔的详细规范 Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA 540FAAC-1992 电子设备用间距50密耳的多插件竖直安装格式模块化插孔的详细规范 Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA 540FAAD-1992 电子设备用间距50密耳的多插件成角度安装格式模块化插孔的详细规范 Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA 540G000-1993 电子设备用焊上插孔分规范 Sectional Specification for Burn-In Sockets for Use in Electronic Equipment
ANSI/EIA 540GA00-1993 电子设备用带模制垫圈的片载插件用焊上插孔的空白详细规范 Blank Detail Specification for Burn-In Socket for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment
ANSI/EIA 540GAAA-1993 电子设备用带模制垫圈的片载插件烧制插孔的分规范 Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use with Electronic Equipment
ANSI/EIA 540H000-1997 电子设备用带球形式格子排列装置的焊上插孔的分规范 Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
ANSI/EIA 540HAAA-2000 在电子设备中用的带球形格子排列装置焊上插孔的详细规范 Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
ANSI/EIA 616-1996 印制电路板和底板的两毫米两部件连接器 Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes
ANSI/EIA 700A0AB-1995 1.27mm间距68回路存储插件互连系统的详细规范 Detail Specification for 1.27mm Pitch, 68 Circuit Memory Card Interconnect System
ANSI/EIA 700A0AD-1997 1.27mm孔距,带状接触（片簧）的梯型自锁I/O连接件接口的详细规范 Detail Specification for the Interface of the 1.27-mm Pitch, Ribbon Contact (Leaf Spring) Trapezoidal Shaped, Self-Locking I/O Connector
ANSI/EIA 700AOAA-1995 1.27mm螺距、带状触点、梯形、屏蔽I/O连接器的详细规范 Detail Specification for 1.27 mm Pitch, Ribbon Contact, Trapezoidal Shaped, Shielded I/O Connector
ANSI/EIA 700AOAB-1995 1.27mm间距、68环形存储卡互连系统的详细规范 Detail Specification for 1.27mm Pitch, 68 Circuit Memory Card Interconnect System
ANSI/EIA 700AOAE-2000 使用单连接器固定的1.27mm间距双排的具有不可移动的带式电缆接触的锥形连接件的详细规范 Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
ANSI/EIA 700AOAF-2000 用于非常高密度电缆连接的0.8mm间距的锥形屏蔽连接器的详细规范 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
ANSI/EIA 700B000-1999 矩形锥形连接器的分规范 Sectional Specification for Rectangular/Trapezoidal Connectors
ANSI/EIA/TIA 540D0AA-1989 双列直插式组件插孔详细规范 Detail Specification for Dual-In-Line Package Sockets
ANSI/EIA-364-104A-2000 电连接器易燃性试验程序 Flammability Test Procedure for Electrical Connectors
ANSI/EIA-364-109-2003 电连接器的电感(回路)测量试验程序(1 nH - 10 nH) Inductance (Loop) Measurement Test Procedure for Electrical Connectors (1 nH - 10 nH)
ANSI/EIA-364-12A-2005 电连接器和插座的束口试验程序 Restricted Entry Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-78A-2002 电连接器腔间泄漏接合完整性试验规程.新试验程序*78 New Test Procedure 78, Cavity-to-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
ANSI/EIA-5400000-A-2007 电子设备用集成电路(IC)组件插孔的一般规范 Generic Specification for Sockets for Integrated Circuit (IC) Packages for Use in Electronic Equipment
ANSI/EIA-540A000-A-1990 电子设备用芯片载体插座分规范 Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment
ANSI/EIA-540AA00-1991 电子设备用无引线A、B和D型片式载体用片式载体插座的空白详细规范 Chip Carrier Sockets for Leadless type A,B,D Chip Carriers for use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA-540AAAA-1990 嬵譐妾甇(坁?1.27mm(.050")间隔的无引线芯片载体用片式载体插座 Chip Carrier Sockets for Leadless Type A 1.27 mm (.050") Spacing Chip Carriers for Use in Electronic Equipment
ANSI/EIA-540AB00-1991 电子设备用塑料方形扁平封装用片式载体插座的空白详细规范 Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA-540ABAA-1991 塑料方形扁平封装0.635mm(0.25英寸)引线间隔的芯片载体插座的详细规范 Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing)
ANSI/EIA-540AC00-1991 电子设备用J型引线塑料片式载体(PCC)封装的片式载体插座的空白详细规范 Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA-540ACAA-1991 1.27mm(0.50英寸)引线间隔的塑料片式载体系列用片式载体插座的详细规范 Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for
ANSI/EIA-540AD00-1991 电子设备用插针格栅阵列插座的载体方形扁平组件的适配器用空白详细规范 Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA-540ADAA-1992 电子设备用插针格栅阵列插座的载体方形扁平组件的适配器用详细规范 Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for
ANSI/EIA-540B000-1989 嬵譐妾甇锨雴五:2.54 mm × 2.54 mm (0.1" × 0.1")的引线格栅阵列(PGA)器件插座的分规范 Sectional Specification for Sockets for Pin-Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA-540B0AA-2001 电子设备用间隔为1.27 mm (0.050英寸)的球形格栅阵列(BGA)插座生产的详细规范 Detail Specification for Production Ball Grid Array (BGA) Sockets with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment
ANSI/EIA-540BA00-1990 嬵譐妾甇锨雴五:2.54 mm× 2.54 mm (0.1" × 0.1")的引线格栅阵列(PGA)器件插座的空白详细规范 Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA-540BAAB-1990 嬵譐妾甇锨雴五:2.54 mm× 2.54 mm (0.1" × 0.1")的引线格栅阵列(PGA)器件用非机械操作插座 Non-Mechanically Activated Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA-540BAAC-1990 电子设备用引线格栅阵列(PGA)器件的非机械操作柔性载体插座详细规范 Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment, Detail Specification for
ANSI/EIA-540C000-1988 电子设备用继电器插座的分规范 Sectional Specification for Sockets for Relays for Use in Electronic Equipment
ANSI/EIA-540CA00-1989 继电器插座的空白详细规范 Blank Detail Specification on Relay Sockets
ANSI/EIA-540CAAA-1989 继电器插座的详细规范.平衡衔铁继电器用10A插座 Detail Specification on Relay Sockets - 10A for Balanced Armature Relay
ANSI/EIA-540CAAB-1989 继电器插座的详细规范.平衡衔铁继电器用5A插座 Detail Specification for Relay Sockets - 5A for Balanced Armature Relay
ANSI/EIA-540CAAC-1998 双极10A继电器插座的详细规范 Detail Specification for 2-Pole 10A Relay Sockets
ANSI/EIA-540CAAD-A-1999 双极5A继电器插座的详细规范 Detail Specification for 2-Pole, 5A Relay Sockets
ANSI/EIA-540CAAE-A-1999 三极10A继电器插座的详细规范 Detail Specification for 3-Pole 10A Relay Sockets
ANSI/EIA-540D000A-1991 电子设备用直插封装插座的分规范 In-Line Package Sockets for Use in Electronic Equipment, Sectional Specification for
ANSI/EIA-540DA00-1991 电子设备用双列直插封装式插座的空白详细规范 Dual-In-Line Package Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA-540DAAB-1991 电子设备用双片双列柔性载体插座的详细规范 Detail Specification for Flexible Carrier 2-Piece Dual-In-Line Socket for Use in Electronic Equipment
ANSI/EIA-540E000-1992 圆形插座分规范 Sectional Specification for Round Style Sockets
ANSI/EIA-540F000-1991 电子设备用多插件模块插座的分规范 Multi-Package Module Sockets for Use in Electronic Equipment, Sectional Specification for
ANSI/EIA-540FAAA-1992 电子设备用100Mil间距多插件、垂直安装的格式模块插座的详细规范 Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA-540FAAB-1992 电子设备用100Mil间距多插件、定角安装的格式模块插座的详细规范 Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA-540FAAC-1992 电子设备用50Mil间距多插件、垂直安装的格式模块插座的详细规范 Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA-540FAAD-1992 电子设备用50Mil间距多插件、定角安装的格式模块插座的详细规范 Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA-540G000-1993 电子设备用烧进插座的分规范 Sectional Specification for Burn-In Sockets for Use in Electronic Equipment
ANSI/EIA-540GA00-1993 电子设备用带模压载体环的片式载体封装烧进插座的空白详细规范 Blank Detail Specification for Burn-In Socket for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment
ANSI/EIA-540GAAA-1993 电子设备用带模压载体环的片式载体封装烧进插座的详细规范 Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use with Electronic Equipment
ANSI/EIA-540H000-1997 电子设备用球形格栅阵列(BGA)器件烧结插座的分规范 Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
ANSI/EIA-540HAAA-2000 电子设备用球形格栅阵列(BGA)器件烧进插座的详细规范 Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment
ANSI/EIA-616-A-2002 印制板和底板上使用的两毫米两件式连接器 Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes
ANSI/EIA-700A0AD-1997 1.27mm 间距带状触点（片簧）梯形自锁式I/O 连接器接口的详细规范 Detail Specification for the Interface of the 1.27-mm Pitch, Ribbon Contact (Leaf Spring) Trapezoidal Shaped, Self-Locking I/O Connector
ANSI/EIA-700AOAE-2000 单个连接器连接用、间距为1.27mm、带状电缆、双排不可拆卸触点的梯形连接器的详细规范(SCA2) Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
ANSI/EIA-700AOAF-2000 极高密度电缆互连用间距0.8mm梯形屏蔽连接器的详细规范 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
ANSI/EIA-700B000-1999 矩形/梯形连接器的详细规范 Sectional Specification for Rectangular/Trapezoidal Connectors
ANSI/IEEE 1101.11-1998 使用IEEE 1101.10设备实施规程的微型计算机用机械后置插件规范 Mechanical Rear Plug-in Units Specifications for Microcomputers Using the IEEE 1101.10 Equipment Practice
ANSI/IEEE 1215-2002 可分隔绝缘的连接器的应用指南 Guide for the Application of Separable Insulated Connectors
ANSI/SCTE 101-2006 电源线绞接件连接器回波损耗 Mainline Splice Connector Return Loss
ANSI/SCTE 116-2006 5/8-24端口、内螺纹接头的规范 Specification for 5/8-24 Port, Female Adapters
ANSI/SCTE 125-2007 电源线插头连接器回程损耗的试验方法 Test Method for Mainline PIN (Plug) Connector Return Loss
ANSI/VITA 30.1-2008 冷却传导欧洲卡用2mm设备实施规程 2mm Equipment Practice for Conduction Cooled Eurocard
ANSI/VITA 30-2000 欧洲交易所系统2mm连接器的实施规程 2mm Connector Practice for Euroboard Systems
ANSI/EIA 448-19A-2000 机电元件的试验标准.用气相系统法确立机械焊接的环境效应 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System
ANSI/EIA-448-19A-2000 机电元件的试验标准.用汽相系统的机械钎焊的环境影响 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System
ANSI/IEEE 1603-2003 描述集成电路(IC)技术、单元和模块的高级库格式(ALF)标准 A Standard for an Advanced Library Format (ALF) Describing Integrated Circuit (IC) Technology, Cells, and Blocks
ANSI/ASTM D5109-1999 印刷书写板用铠装铜热固性层板试验方法 Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
ANSI/IEEE 1532-2002 可编程设备的系统内配置标准 Standard for In-System Configuration of Programmable Devices
ANSI/IPC CC-830B-2002 印制板组件的电绝缘化合物的合格鉴定和性能 Electrical Insulating Compound for Printing Board Assemblies, Qualifications and Performance of
ANSI/IPC SC-60A-1999 柱状软钎焊焊剂清洁手册 Post Solder Solvent Cleaning Handbook
ANSI/IPC HDBK-610-2002 IPC-A-610的手册和指南(包括IPC-A-610B和C的比较) Handbook and Guide to IPC-A-610 (Includes IPC-A-610B and C Comparison)
ANSI Z21.77a Addenda-1993 人工操作的压电型电火花气体点火装置和元部件.补充件 Manually-operated piezo-electric spark gas ignition systems and components; Addenda
ANSI/IEEE 449-1998 铁磁谐振调压器 Standard for Ferroresonant Voltage Regulators
ANSI/IEEE 1620.1-2006 表征基于环形振荡器的有机电晶体管特性的试验方法标准 Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators
ANSI/IEEE 1620-2004 有机晶体管和材料的特性的试验方法标准 Standard for Test Methods for the Characterization of Organic Transistors and Materials
ANSI/IEEE C62.37.1-2000 半导体闸流管电泳保护设备应用指南 Guide for the Application of Thyristor Surge Protective Devices
ANSI/IEEE C62.37-1996 可控硅二极管电泳保护装置标准试验规范 Standard Test Specification for Thyristor Diode Surge Protective Devices
ANSI/EIA 320-A-1992 二级管静态参数测量的热平衡条件 Thermal Equilibrium Conditions for Measurement of Diode Static Parameters
ANSI/EIA 381-A-1992 二级管Q值测量法 Method of Diode "Q" Measurement
ANSI/EIA 236-C-1986 分立半导体器件的彩色编码 Color Coding of Discrete Semiconductor Devices
ANSI N42.31-2003 离子辐射的宽能带隙半导体探测器的分辨和功效的测量规程 Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation
ANSI/ASTM E1161-1996 半导体和电子元件放射性检查试验方法 Test Method for Radiologic Examination of Semiconductors and Electronic Components
ANSI/EIA 321-C-1987 半导体器件同名终端功能的编号和多单元半导体器件的单元名称 Numbering of Like-Named Terminal Functions in Semiconductor Devices and Designation of Units in Multiple-Unit Semiconductor Devices
ANSI/EIA 370-B-1992 半导体器件的命名系统 Semiconductor Devices, Designation System for
ANSI/EIA 4900-2002 超过制造商规定温度范围的半导体装置的使用 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges
ANSI/EIA-4900-2002 半导体器件在制造商规定温度范围外的使用 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges
ANSI/ESD SP5.5.2-2007 静电放电敏感元件的保护用智能型静电放电发生器协会草案标准规程.特快输电线路脉冲静电放电敏感度测试(VF-TLP).元部件级 Practice for the Protection of Electrostatic Discharge Susceptible Items - Electrostatic Discharge Sensitivity Testing Very Fast Transmission Line Pulse (VF-TLP) - Component Level
ANSI/IPC/JEDEC J-STD-020B-2002 电信.湿敏元件的分类 Telecommunications - Classification of Moisture Sensitive Components
ANSI/IEEE 824-2004 动力系统系列电容器标准 Standard for Series Capacitors in Power Systems
ANSI/IEEE C37.99-2000 分路电容器组的保护指南 Guide for the Protection of Shunt Capacitor Banks
ANSI/IEEE 18-2002 并联电力电容器 Shunt Power Capacitors
ANSI/IEEE 1031-2000 传输用静态变量补偿器的功能规范指南 Guide for the Functional Specification of Transmission Static VAR Compensators
ANSI/EIA 395-1-1975 长寿命(1型)和普通(2型)极化铝的电解电容器 Electrolytic Capacitors for Long Life, Type 1, and General Purpose Application, Type 2, Polarized Aluminum
ANSI/EIA 463-A-1999 交流电动机起动用重型(1型)和轻型(2型)铝电解固定电容器. Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum
ANSI/EIA-463-B-2003 重型(1型)和轻型(2型)交流电动机起动用固定铝电解电容器 Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum
ANSI/EIA-956-2006 带聚合物阴极的铝电解集成电容器 Aluminum Electrolytic Chip Capacitor with Polymer Cathode
ANSI/EIA 535BAAC-A-1998 1型防护的固定钽片电容器.标准电容量范围 Fixed Tantalum Chip Capacitor Style 1 Protected - Standard Capacitance Range
ANSI/EIA 535BAAD-1990 1型防护固定钽薄片电容器.扩大电容范围 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range
ANSI/EIA-535BAAC-A-1998 带保护1型钽片式固定电容器.标准电容量范围 Fixed Tantalum Chip Capacitor Style 1 Protected - Standard Capacitance Range
ANSI/EIA 401-1973 功率半导体设备用纸介质和纸/薄膜介质电容器 Paper, Paper/Film Dielectric Capacitors for Power Semiconductor Applications
ANSI/EIA 454-1978 交流用非聚氯联苯浸渍的固定纸介质和纸-薄膜介质电容器 Fixed Paper and Film-Paper Dielectric Capacitors with Non-PCB Impregnants for Alternating Current Applications
ANSI/EIA 479-A-1993 50/60Hz倍压电源用的薄膜纸介质和薄膜介电电容器 Film-Paper, Film Dielectric Capacitors for 50/60 Hz Voltage Doubler Power Supplies
ANSI/EIA 495-A-1989 交流电用带镀金属纸引线薄膜介质电容器 Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications
ANSI/EIA 580A000-1991 镀金属引线和聚对苯二甲酸乙酯介质的固定片状电容器的分规范 Fixed Chip Capacitors with Metallized Electrodes and Polyethylene-Terephthalate Dielectric, Sectional Specification for
ANSI/EIA 580A0AC-1998 固定镀金属聚对苯二甲酸乙酯薄膜介质轴向引线直流电容器的详细规范 Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded
ANSI/EIA 580AA00-1991 直流电用封装的固定镀金属聚对苯二甲酸乙酯薄膜介质片状电容器的空白详细规范 Fixed Metalized Polyethylene-Terephthalate Film Dielectric Chip Capacitors for Direct Current - Encapsulated, Blank Detail Specification for
ANSI/EIA-580A0AC-1998 金属化聚对苯二甲酸乙二醇酯膜介质轴向引线直流固定电容器的详细规范 Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded
ANSI/EIA 198-1-E-1997 I、II、III和IV级瓷介质电容器 Ceramic Dielectric Capacitors, Classes I, II, III, and IV
ANSI/EIA 469-C-1997 高可靠性瓷介质单体电容器的破坏性物理分析 Destructive Physical Analysis of High-Reliability Ceramic Monolithic Capacitors
ANSI/EIA 483-1981 高频多层陶瓷电容器有效串联电阻和电容的试验方法 Ceramic Capacitors at High Frequencies, Method of Test for Effective Series Resistance (ESR) and Capacitance for Multilayer
ANSI/EIA 521-1993 电气用多层陶瓷电容器的应用指南 Application Guide for Multilayer Ceramic Capacitors - Electrical
ANSI/EIA 595-1993 多层瓷片电容器的表观/机械检验 Visual/Mechanical Inspection of Multi-Layer Ceramic Chip Capacitors
ANSI/EIA-198-1-F-2002 I、II、III和 IV类陶瓷介质电容器 Ceramic Dielectric Capacitors, Classes I, II, III, and IV
ANSI/EIA-198-2-E-1997 I、II、III、 and IV类陶瓷介质电容器.第2部分:试验方法 Ceramic Dielectric Capacitors - Classes I, II, III and IV - Part II: Test Methods
ANSI/EIA-198-3-E-1997 I、II、III、and IV类陶瓷介质电容器.第3部分:单项规范 Ceramic Dielectric Capacitors - Classes I, II, III and IV - Part III: Individual Specifications
ANSI/EIA-469-D-2006 片状瓷电容器破坏性物理分析的试验方法 Test Method for Destructive Physical Analysis (DPA) of Ceramic Monololithic Capacitors
ANSI/EIA 376-1-1971 直流用有金属及非金属外壳的固定薄膜介质电容器 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/EIA 376-1970 直流用有金属及非金属外壳的固定薄膜介质电容器 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/EIA 580BA00-1997 空白详细规范:固定金属引线薄膜介电交流电容器 Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors
ANSI/EIA-580A0AB-1999 金属化聚对苯二甲酸乙二醇酯膜介质直流径向引线固定电容器的详细规范 Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Radial-Leaded
ANSI/EIA 377-1-1972 直流用有金属及非金属外壳的镀金属介质电容器 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application
ANSI/EIA 540DB00-1993 退耦合电容器双排标准组合插件插座的空白详细规范 Blank Detail Specification for Decoupling Capacitor Dual-in-Line Package Sockets
ANSI/EIA 540DBAA-1994 电子设备用退耦合电容器双排标准组件插孔的详细规范 Detail Specification for Decoupling Capacitor Dual-In-Line Package Sockets for Use in Electronic Equipment
ANSI/EIA-540DB00-1993 去耦电容器双列直插封装式插座的空白详细规范 Blank Detail Specification for Decoupling Capacitor Dual-in-Line Package Sockets
ANSI/EIA-540DBAA-1994 电子设备用去耦电容器双列直插封装式插座的详细规范 Detail Specification for Decoupling Capacitor Dual-In-Line Package Sockets for Use in Electronic Equipment
ANSI/UL 810-2008 电容器安全标准 Standard for Safety for Capacitors
ANSI/EIA 575-1990 一般用表面安装矩形电阻器 Resistors, Rectangular, Surface Mount, General Purpose
ANSI/EIA 576-1990 表面安装精密矩形电阻器 Resistors, Rectangular, Surface Mount, Precision
ANSI/EIA-575-A-2005 表面安装的一般用途矩形电阻器 Resistors, Rectangular, Surface Mount, General Purpose
ANSI/EIA-576-A-2005 表面安装的矩形精密电阻器 Resistors, Rectangular, Surface Mount, Precision
ANSI/GEIA STD-0003-2006 电子设备的长期存储程序 Procedures for Long Term Storage of Electronic Devices
ANSI/GEIA STD-0005-2-2006 降低航空航天和高性能电子系统中锡晶须影响的标准 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems
ANSI/IEEE 1478-2001 铁路运行车辆电子设备的环境条件 Environmental Conditions for Transit Rail Car Electronic Equipment
ANSI/CEA 556-B-1999 电子仪器.外部货运容器条形码标签标准 Electronics - Outer Shipping Container Bar Code Label Standard
ANSI/EIA 364-48-1990 接插件金属镀层厚度测量的测试程序 Test Procedure for Metallic Coating Thickness Measurements of Contacts
ANSI/EIA 554-1-1996 百万分之几（PPM）平均出厂质量指标的评估 Assessment of Average Outgoing Quality Levels in Parts Per Million (PPM)
ANSI/EIA 584-1991 按连续制造过程的属性进行检验用零验收数取样的程序和表格 Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
ANSI/EIA 585-1991 按隔批属性进行检验用零验收数取样的程序和表格 Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
ANSI/EIA 670-1997 质量系统评价 Quality Systems Assessment
ANSI/EIA 748-A-1998 赢利值管理系统 Earned Value Management System
ANSI/EIA 623-1994 固体元件按政府采购人员要求的采购质量 Procurement Quality of Solid State Components by Government Contractors
ANSI/EIA 649-1998 配置管理的国家一致标准 National Consensus Standard for Configuration Management
ANSI/VITA 40-2003 服务指示器标准 Service Indicators Standard
ANSI/ISA S12.01.01-1999 危险(保密)地点电气装置的信息和定义 Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations
ANSI/IEEE 1584-2002 电弧闪光危害计算的实施导则 Guide for Performing Arc Flash Hazard Calculations
ANSI/IEEE 1584a-2004 电弧闪光危害计算的的实施指南.修改件 Guide for Performing Arc-Flash Hazard Calculations - Amendment
ANSI/ISA 12.00.01-2005 在I级0和1区危险场所用的电气设备.一般要求 Electrical Apparatus for Use in Class I, Zones 0 & 1 Hazardous (Classified) Locations - General Requirements
ANSI/ISA 12.04.01-2004 瀆悸氧伔獓墯疃用氵謔妾笮,進勨区劋岛蠁埅?"p" Electrical Apparatus for Explosive Gas Atmospheres - Part 2: Pressurized Enclosures "p"
ANSI/ISA 12.10.02-2006 20区、21区和22区危险(已分类)场所用电气设备.一般要求 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements
ANSI/ISA 12.10.02IEC 61241-0-2006 在20、21和22（分类的）危害区域用电气设备.一般要求 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements
ANSI/ISA 12.10.05(IEC 61241-10 Mod)-2004 20区、21区和22区危险场所用电气设备.20区、21区和22区危险场所分类 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations (IEC 61241-10 Mod)
ANSI/ISA 12.10.05-2004 20,21和22危险区域(已划分的)中使用的电气装置.20,21和22危险区域的分类 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations (IEC 61241-10 Mod)
ANSI/ISA 12.12.02-2003 繉厧场?簲卻陱坩戺癀疄氵謔妾."n"型电气防护设备 Electrical Apparatus for Use in Class I Zone 2 Hazardous (Classified) Locations - Type of Protection "n"
ANSI/ISA 12.16.01(IEC 60079-7)-2002 籉{匱区陱i伨寝?圩帰甦用嬵譐妾伺拝粤坻?挮髐盘宄冉恨'"e" Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"
ANSI/ISA 12.16.01-2002 籉{匱陱卩伺畿瘨疄氵謔妾＇阚戲粤坻?堮從嬺冉h"e" Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"
ANSI/ISA 60079-1(12.22.01)-2005 繉§ぉ匁陱卩场?1崨勲縆§圩戺畀用氵嘔全w伺拝粤坻?阮焻?"d"型 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof "d"
ANSI/ISA 60079-11(12.02.01)-2002 划丆:籉乻瘭??
?吁?匲陱坩戺佀畿瘨疄氵謔妾脮軪宫冉h"i" Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety "i"
ANSI/ISA 60079-18(12.23.01)-2005 等级I、危险区域1(已分级)场所用电气器具:保护类型.密封'm'型 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Encapsulation 'm'
ANSI/ISA 60079-26(12.00.03)-2008 电气设备使用在I类， 0区危险（分类）地点 Electrical Apparatus for Use in Class I, Zone 0 Hazardous (Classified) Locations
ANSI/ISA 60079-7(12.16.01)-2002 籉{匱区陱i崨勲簆{圩戺畀用氵謔妾伮拝粤坻?嬮冉恨堧從:"e"型 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"
ANSI/ISA 61241-11-2007 2匰?
2匱吺?2匲区陱i刨簆登?圩戺畀用氵謔妾匮枟嬉冉幨|"iD"型防护 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD"
ANSI/ISA 61241-1-2007 2匰?
2匱吺?2匲区陱i刨簆登?圩戺畀用氵謔妾央堖ó"tD"型防护 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD"
ANSI/ISA 61241-18-2007 2匰?
2匱吺?2匲区陱i刨簆登?圩戺畀用氵謔妾尮蠁?"mD"型防护 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Encapsulation "mD"
ANSI/ISA 61241-2-2007 2匱吺?2匲区陱i刨簆登?圩戺畀用氵謔妾堮厞?"pD"型防护 Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD"
ANSI/ISA S12.25.01-1998 繉§匱区陱坩戺畀用氵謔妾伺拝垤压÷簮枉堫八E"q"型 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Powder Filling "q"
ANSI/ISA S12.26.01-1998 繉§匱区陱坩戺畀用氵謔妾伺拝垤压÷氮涹x"O"型 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Oil Immersion "o"
ANSI/UL 1203-2006 危险(分类的)场所用防爆和防燃尘电气设备的安全标准 Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
ANSI/UL 2225-2005 分类危险场所用的电缆和电缆装配安全标准 Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations
ANSI/UL 913-2006 在I、II、III级1区危险场所使用的内在安全装置和附属装置的安全标准 Standard for Safety for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
ANSI/IEEE C37.016-2006 额定电压为15.5kV-245kV的交流电流(AC)高压电路开关标准 Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV
ANSI/ISA 12.12.01-2007 I和II级、2区及III级、1和2区危险(保密)场所用不易燃电气设备 Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations
ANSI/ISA RP12.06.01-2003 危险场所的布线实施.工具.第1部分:固有安全 Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety
ANSI/ISA RP12.6-1995 危险(保密)场所的布线惯例.工具.第I部分:固有安全 Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety
ANSI/ISA S12.12-1994 I、II级、2区和III级、1、2区危险(保密)场所用不易燃电气设备 Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations
ANSI/IEEE 1246-2002 变电站用瞬间防护接地系统指南 Guide for Temporary Protective Grounding Systems Used in Substations
ANSI/IEEE 1515-2000 电子电源子系统的推荐实施规程:参数定义、试验条件和试验方法 Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
ANSI/IEEE 1070-2006 电力传输模块恢复结构元件设计和试验指南 Guide for the Design and Testing of Transmission Modular Restoration Structure Components
ANSI O5.1-2002 木杆.规范和尺寸 Wood Poles - Specifications and Dimensions
ANSI O5.1b-2003 规范和尺寸 Specifications and Dimensions
ANSI O5.1c-2004 ANSI O5.1-2002的补充件.木杆.公用建筑用结构胶合板 Supplement to ANSI O5.1-2002- Wood Poles - Structural Glued Laminated Timber for Utility Structures
ANSI/IEEE 1138-1994 电气公用设施电力线用复合光纤接地线(OPGW)的标准结构 Standard Construction of Composite Fiber Optic Groundwire (OPGW) for use on Electric Utility Power Lines
ANSI/IEEE 1260-2007 用电力导线预报、测量和分析AM广播再辐射的指南 Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
ANSI E1.16-2002 娱乐技术.金属卤素灯镇流器动力电缆的结构标准 Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables
ANSI/CEA 709.2-A-2000 控制网络电力线(PL)信道规范 Control Network Powerline (PL) Channel Specification
ANSI/IEEE 1025-1994 水泥电杆结构物的组装和竖立 Assembly and Erection of Concrete Pole Structures
ANSI/IEEE 1048-2003 电力线保护接地用指南 Guide for Protective Grounding of Power Lines
ANSI/IEEE 1283-2004 高温运行对导体、连接器和附件影响的测定指南 Guide for Determining the Effects of High Temperature Operation on Conductors, Connectors, and Accessories
ANSI/IEEE 1368-2006 架空导线风成振动场测量指南 Guide for Aeolian Vibration Field Measurements of Overhead Conductors
ANSI/IEEE 1441-2004 驾空传输线结构检查指南 Guide for Inspection of Overhead Transmission Line Construction
ANSI/IEEE 1511-2004 额定电压为5kV至46 kV的系统上电力电缆、接头和终端故障的调查和分析指南 Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
ANSI/IEEE 48-1996 高压交流电缆终端的标准试验程序和要求 Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
ANSI/IEEE 516-2003 带电电力线路的维护方法指南 Guide for Maintenance Methods on Energized Power Lines
ANSI/IEEE 524-2003 架空传输线导体的安装指南 Installation of Overhead Transmission Line Conductors, Guide to the
ANSI/IEEE 563-1991 导线自阻尼测量指南 Guide for Conductor Self-Damping Measurements
ANSI/IEEE 576-2000 工业和商业用绝缘电力电缆的安装、端接和检测的推荐实施规程 Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
ANSI/IEEE 643-2004 电力线路载波器指南 Guide for Power-Line Carrier Applications
ANSI/IEEE 664-1994 单根导线风吹震动阻尼器功率耗散特性的实验室测量 Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors
ANSI/IEEE 691-2007 传输结构的基础设计和测试用指南 Guide for Transmission Structure Foundation Design and Testing
ANSI/IEEE 738-2006 架空裸导线瞬时温度的计算标准 Standard for Calculating the Current-Temperature of Bare Overhead Conductors
ANSI/IEEE C135.2-1999 架空线结构用加螺纹镀锌铁绞线孔眼紧固杆和螺母标准 Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
ANSI/IEEE C135.61-2006 驾空传输和分配线硬件测试标准 Standard for the Testing of Overhead Transmission and Distribution Line Hardware
ANSI/IEEE C135.63-1998 架空线结构用带电肩线膨胀链的标准 Standard for Shoulder Live Line Extension Links for Overhead Line Construction
ANSI/IEEE 1264-2004 变电站动物防范指南 Guide for Animal Deterrents for Electric Power Supply Substations
ANSI/IEEE 1268-2005 变电所移动设备的安全安装指南 Guide for the Safe Installation of Mobile Substation Equipment
ANSI/IEEE 1299/C62.22.1-1996 保护绝缘屏蔽电力电缆系统的电涌放电器的连接指南 Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
ANSI/IEEE 1378-1997 高压直流(HVDC)变电站和相关传输系统的调试导则 Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems
ANSI/IEEE 1427-2006 空气绝缘电力变电站适宜电间隙和绝缘水平指南 Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations
ANSI/IEEE 1646-2004 电力变电所自动化用标准通讯传输时间性能要求 Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
ANSI/IEEE 525-2007 变电站电缆系统的设计和安装 Design and Installation of Cable Systems in Substations
ANSI/IEEE C57.12.36-2007 标准要求液体沉浸配电变电站变压器 Standard Requirements for Liquid-Immersed Distribution Substation Transformers
ANSI/IEEE C62.11-2005 交流电源电路用金属氧化物避雷器标准 Standard for Metal-Oxide Surge Arresters for AC Power Circuits (<gr??er> 1 kV)
ANSI/SCTE 81-2007 耐电涌测试程序 Surge Withstand Test Procedure
ANSI/IEEE 493-2007 可靠的工业及商业电力系统设计用推荐实施规程 Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
ANSI/NEMA ICEAS-93-639/WC 74-2006 用于电能输电和配电的5～46kV铠装电力电缆 5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
ANSI/IEEE C37.123-1997 气体绝缘变电站设备规范指南 Gas-Insulated Substation Equipment, Guide to Specifications for
ANSI C84.1-2006 电力系统和设备的美国国家标准.电压额定值(60Hz) American National Standard for Electric Power Systems and Equipment - Voltage Ratings (60 Hertz)
ANSI T1.337-2004 网络电力传输系统的最大电压、电流和功率级的要求 Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport System
ANSI/ICEA S-105-692-2004 600伏特单层热固性绝缘公用地下配电电缆 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables
ANSI/IEEE 1159-1995 检测电力质量的推荐实施规范 Recommended Practice on Monitoring Electric Power Quality
ANSI/IEEE 1346-1998 评估电力系统和电子处理设备兼容性的推荐实施规程 Recommended Practice for Evaluating Electrical Power System Compatibility with Electronic Process Equipment
ANSI/IEEE 1366-2003 配电可靠性指数指南 Guide for Electric Power Distribution Reliability Indices
ANSI/IEEE 141-1993 工业装置用的配电推荐规程(红皮书) Recommended Practice for Electric Power Distribution for Industrial Plants (Red Book)
ANSI/IEEE 1547.1-2005 带电源设备的设备内部连接分配式电源的一致性试验程序标准 Standard for Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems
ANSI/IEEE 1547-2003 带电力系统的互连分配资源标准 Standard for Interconnecting Distributed Resources with Electric Power Systems
ANSI/IEEE 241-1991 商业建筑物中电力系统(灰皮书) Electric Power Systems in Commercial Buildings (Gray Book)
ANSI/IEEE 242-2001 工业和商业电力系统的保护和协调的推荐实施规程 Protection and Coordination of Industrial and Commercial Power Systems, Recommended Practice for
ANSI/IEEE 399-1997 电力系统分析推荐实施规程(IEEE棕皮书) Analysis (IEEE Brown Book), Recommended Practice for Power System
ANSI/IEEE 400-2002 电力电缆系统现场进行直流高压试验的指南 Direct Voltage Tests on Power Cables in the Field, Guide for Making
ANSI/IEEE 446-1995 工业和商业用途的应急和备用电力系统 Emergency and Standby Power Systems for Industrial and Commercial Applications
ANSI/IEEE 495-2007 故障电路指示器的试验指南 Guide for Testing Faulted Circuit Indicators
ANSI/IEEE C37.118-2005 电力系统同步矢量度标准 Standard for Synchrophasors for Power Systems
ANSI/NETA MTS-2007 配电设备和系统维修测试规范标准 Standard for Maintenance Testing Specifications for Electrical Distribution Equipment and Systems
ANSI/IEEE 1725-2006 移动电话用可再充电电池标准 Standard for Rechargeable Batteries for Cellular Telephones
ANSI C18.2M Part 1-2007 便携式可充电电池用标准.总则和规范 Standard for Portable Rechargeable Cells and Batteries - General and Specifications
ANSI C18.2M Part 2-2007 便携式可再充电电池.安全标准 Portable Rechargeble Cells and Batteries - Safety Standard
ANSI C18.2M-1997 电池组.密封可再充电的镍镉圆柱形裸露的和有外壳的蓄电池 Batteries - Sealed Rechargeable (Secondary) Nickel-Cadmium Cylindrical Bare Cells and Jacketed Batteries
ANSI/ASTM D7148-2006 用电解槽测量系统中用碳极测定碱性蓄电池隔板的离子(电阻率)用试验方法 Test Method for Determining the Ionic (resistivity) (er) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ANSI/IEEE 1106-2005 固定设施用带泄漏口的镍镉蓄电池组的安装、维护、测试及更换的推荐实施规程 Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
ANSI/IEEE 1115-2000 固定电池组用镍镉蓄电池组规格选择 Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
ANSI/IEEE 1115a-2007 固定装置用镊镉电池的推荐实施规程.修改件1:外加规格极限 Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications - Amendment 1: Additional Discussion on Sizing Margins
ANSI/IEEE 1568-2003 铁路客运工具用镍镉蓄电池电量大小的推荐规程 Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles
ANSI/IEEE 1625-2004 便携式计算机用可再充电电池 Rechargeable Batteries for Portable Computing
ANSI/SAE J1766-1998 电动和混合电动车蓄电池系统的推荐实施规程.碰撞完整性试验 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems - Crash Integrity Testing
ANSI T1.330-1997 电信.电信环境用的阀调的铅酸电池 Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment
ANSI/IEEE 1013-2007 单机光电(PV)系统用酸性铅蓄电池尺寸选定的推荐实施规程 Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
ANSI/IEEE 1187-2002 固定用途的阀调节铅酸蓄电池的安装设计和安装的推荐实施规程 Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
ANSI/IEEE 1188-2005 固定设备用的阀调节铅酸蓄电池的维修、试验和更换的推荐实施规程 Recommended Practice for Maintenance, Testing and Replacement of Valve Regulated Lead-Acid Batteries for Stationary Applications
ANSI/IEEE 1361-2003 独立的光电系统中使用的铅酸蓄电池的选择、充电、试验和评定指南 Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
ANSI/IEEE 1375-1998 固定蓄电池组系统的保护指南 Guide for Protection of Stationary Battery Systems
ANSI/IEEE 1536-2002 铁路运输车辆蓄电池物理接口标准 Standard for Rail Transit Vehicle Battery Physical Interface
ANSI/IEEE 450-2002 发电站和变电站的大型铅蓄电池组的维护、试验和更换实施规程 Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations, Practice for
ANSI/IEEE 484-2002 固定设备用大型铅酸蓄电池组安装设计和安装的实施规程 Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
ANSI/IEEE 485-1997 固定装置用的铅酸电池规格选择的推荐实施规程 Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
ANSI/IEEE 535-2006 核电站用1E类铅蓄电池的合格证明标准 Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
ANSI/IEEE 937-2007 光电(PV)系统用铅酸蓄电池组安装和维护实施规程 Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
ANSI/SAE J240-1993 汽车蓄电池的寿命试验 Automotive Storage Batteries, Life Test for
ANSI/SAE J537-1994 蓄电池组 Storage Batteries
ANSI C18.1M Part 2-2003 有水溶电解质的便携式原电池和蓄电池组.安全标准 Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard
ANSI C18.3M Part 1-2005 便携式锂原电池和电池组.总则和规范 Portable Lithium Primary Cells and Batteries - General and Specifications
ANSI C18.3M Part 2-2004 便携式锂原电池和蓄电池.安全标准 Portable Lithium Primary Cells and Batteries - Safety Standard
ANSI C18.3M-1991 原电池.锂原电池.规范 Primary Batteries - Lithium Primary Batteries - Specifications
ANSI/IEEE 1491-2005 固定装置中选择和使用蓄电池监控设备的指南 Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
ANSI/IEEE 1561-2007 引导优化性能和寿命铅蓄电池在偏远的混合动力系统 Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems
ANSI/IEEE 1578-2007 固定蓄电池电解质溢出处理和管理的推荐实施规程 Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
ANSI/SAE J1495-1998 蓄电池阻燃通风系统的试验程序 Test Procedure for Battery Flame Retardant Venting Systems
ANSI/UL 218A-2004 柴油发动机驱动的离心消防泵用蓄电池接触器 Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps
ANSI/IEEE 421.1-2007 同步电机励磁系统的标准定义 Standard Definitions for Excitation Systems for Synchronous Machines
ANSI/ASTM D6224-2002 辅助动力装置的润滑油的使用监测实施规范 Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ANSI/ASAE EP364.3-2006 农场备用电源的安装和维护 Installation and Maintenance of Farm Standby Electric Power
ANSI/ANS 59.51-1997 应急柴油发电机的燃油系统 Fuel-Oil Systems for Emergency Diesel Generators
ANSI/ANS 59.52-1998 安全相关应急柴油发电机用润滑油系统 Lubricating Oil Systems for Safety-Related Emergency Diesel Generators
ANSI/IEEE 1312-1993 电力系统.标称工作电压在230千伏以上的交流电力系统和设备用优选电压额定值 Power Systems - Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages above 230 kV Nominal
ANSI/NECA 411-2006 不断电电源(UPS)安装和维护标准 Standard for Installing and Maintaining Uninterruptible Power Supplies (UPS)
ANSI/NECA 90-2004 住宅发电机组的安装推荐实施规程 Recommended Practice for Installing Residential Generator Sets
ANSI/NFPA 110-2005 应急和备用电源系统 Emergency and Standby Power Systems
ANSI/NFPA 111-2005 储蓄电能应急和备用电源系统 Stored Electrical Energy Emergency and Standby Power Systems
ANSI/UL 1047-2003 绝缘电力系统设备标准 Standard for Isolated Power Systems Equipment
ANSI/IEEE 11-2000 铁路和道路车辆用旋转电机的标准 Standard for Rotating Electric Machinery for Rail and Road Vehicles
ANSI/UL 674-2007 1区电动机和发电机使用安全标准 Standard for Safety for Electric Motors and Generators for Use in Division 1
ANSI/NEMA MG1, Revision 1-2003 电动机和发电机 Motors and Generators
ANSI C50.41-2000 发电站用多相感应电动机 Polyphase Induction Motors for Power Generating Stations
ANSI/API 541-2003 250马力及以上的鼠笼式模绕感应电动机 Form-Wound Squirrel-Cage Induction Motors 250 Horsepower and Larger
ANSI/API 547-2004 250马力和更大的通用模绕鼠笼式感应电动机 General Purpose Form-Wound Squirrel Cage Induction Motors-250 Horsepower and Larger
ANSI/IEEE 114-2001 单相感应电动机的标准试验程序 Standard Test Procedure for Single-Phase Induction Motors
ANSI/IEEE 1255-2000 同步电动机起动过程中扭距脉动的评价指南 Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors
ANSI/IEEE 1349-2001 I级2区危险场所（分类的）使用电动机指南 Guide for Application of Electric Motors in Class I Division 2 Hazardous (Classified) Locations
ANSI/IEEE 1566-2005 额定功率大于等于375kW 的可调速交流电动机性能标准 Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
ANSI/IEEE 252-1995 磁隙有液多相感应电动机的试验程序 Motors Having Liquid in the Magnetic Gap, Test Procedure for Polyphase Induction
ANSI/IEEE 303-2004 1类电机辅助设备.A、B、C和D组第2分部所列电机 Auxiliary Devices for Motors in Class 1 - Groups A, B, C, and D, Division 2 Locations
ANSI/IEEE 43-2000 旋转电机绝缘电阻测试的推荐实施规程 Testing Insulation Resistance of Rotating Machinery, Recommended Practice for
ANSI/IEEE 499-1997 水泥厂电驱动设备和相关电气设备的推荐规程 Cement Plant Electric Drives and Related Electrical Equipment, Recommended Practice for
ANSI/IEEE 649-2006 核发电站用1E级电动控制中心的鉴定 Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
ANSI/IEEE C37.96-2000 交流电动机保护指南 Guide for AC Motor Protection
ANSI/ISA 96.02.01-2008 阀门电力传动装置的规范指南 Guidelines for the Specification of Electric Valve Actuators
ANSI/NECA 230-2003 发动机安装的推荐实施规范 Recommended Practice for Installing Motors
ANSI/NECA 402-2007 安装和维护电动机控制中心用标准 Standard for Installing and Maintaining Motor Control Centers
ANSI/UL 845-2005 电动机控制台标准(公告日期2004年8月19日) Standard for Motor Control Centers (bulletin dated August 19, 2004)
ANSI/IEEE 112-2004 多相感应电机的试验程序 Test Procedures for Polyphase Induction Machines
ANSI/IEEE 115-1995 同步电机的试验程序 Synchronous Machines, Test Procedure for
ANSI/ASME TDP-1-2006 发电用蒸汽轮机防水损坏的推荐实施规程 Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation
ANSI/IEEE 1110-2002 电源系统稳定性分析中同步发电机建模规程和应用指南 Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
ANSI/IEEE 1184-2006 不可间断电源系统用电池的指南 Guide for Batteries for Uninterruptible Power Supply Systems
ANSI/IEEE 1193-2003 标准频率环境敏感度测量指南 Guide for Measurement of Environmental Sensitivities of Standard Frequency
ANSI/IEEE 122-1992 汽轮发电机组控制系统的功能性能特征的推荐规程 Recommended Practice for Functional Performance Characteristics of Control Systems for Steam Turbine Generator Units
ANSI/IEEE 1310-2004 大型发电机线绕定子棒和线圈的热循环试验推荐规程 Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
ANSI/IEEE 421.5-2005 动力系统稳定性研究用励磁系统模型推荐规程 Recommended Practice for Excitation System Models for Power System Stability Studies
ANSI/IEEE 665-1995 发电站接地指南 Guide for Generating Station Grounding
ANSI/IEEE 67-2005 涡轮发电机的操作和维护指南 Guide for the Operation and Maintenance of Turbine Generators
ANSI/IEEE C37.101/Cor 1-2007 发电机接地保护用指南.技术勘误1:附录A.2相量分析(提供情报的) Guide for Generator Ground Protection - Corrigendum 1: Annex A.2 Phasor Analysis (Informative)
ANSI/IEEE C37.101-2006 发电机接地保护指南 Guide for Generator Ground Protection
ANSI/IEEE C37.102-2006 交流发电机保护指南 Guide for AC Generator Protection
ANSI/IEEE C50.12-2005 5MVA及以上水轮机设备用50和60赫兹凸极其同步发电机和发电机/电动机标准 Standard for Salient-Pole 50 and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above
ANSI/IEEE C50.13-2005 10MVA及以上的50和60赫兹鼓形转子同步发电机标准 Standard for Cylindrical-Rotor 50 and 60 Hz, Synchronous Generators Rated 10 MVA and Above
ANSI/NECA 404-2006 安装发电机设备用操作规程建议 Recommended Practice for Installing Generator Sets
ANSI/NECA 406-2003 住宅用发电机组安装的推荐规程 Recommended Practice for Installing Residential Generator Sets
ANSI/UL 2200-2004 固定式发动机驱动型发电机组件的安全标准 Standard for Safety for Stationary Engine Generator Assemblies
ANSI/ASTM B615-1979 滑动电触点电接触噪音测量惯例 Practice for Measuring Trical Contact Noise in Sliding Electrical Contacts
ANSI/EASA AR100-2006 旋转电气器具修理推荐规程 Recommended Practice for the Repair of Rotating Electrical Apparatus
ANSI/IEEE 1043-1996 成型模绕棒和线芯的耐压试验的推荐实施规程 Recommended Practice for Voltage Endurance Testing of Form Wound Bars and Coils
ANSI/NEMA 250-2007 电气设备外壳(最大1000伏特) Enclosures for Electrical Equipment (1000 Volts Maximum)
ANSI/IEEE 1434-2005 旋转电机局部放电测量指南 Guide to the Measurement of Partial Discharges in Rotating Machinery
ANSI/IEEE 522-2004 交流旋转电机用模绕定子线圈的匝间绝缘试验指南 Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines
ANSI/IEEE 620-1997 鼠笼式感应电机的热限值曲线表示指南 Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
ANSI ANSLGC 78.45-2007 自镇流汞灯 Self-Ballasted Mercury Lamps
ANSI C78.1342-1990 电灯.160瓦120伏B87自镇流汞灯 Electric Lamps - 160-Watt 120-Volt B87 Self-Ballasted Mercury Lamps
ANSI C78.180-2003 荧光灯起辉器的规范 Specifications for Fluorescent Lamp Starters
ANSI C78.5-2003 电灯.荧光自镇流灯.性能指南 Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide
ANSI C82.11 consolidated-2004 灯镇流器.高频荧光灯镇流器.补充件 Lamp Ballasts - High Frequency Fluorescent Lamp Ballasts - Supplements
ANSI C82.1-2004 荧光灯镇流器的规范 Specifications for Fluorescent Lamp Ballasts
ANSI C82.14-2006 金属卤化灯用低频方波镇流器 Low Frequency Square Wave Ballasts for Metal Halide Lamps
ANSI C82.2-2002 荧光灯镇流器的测量方法 Method of Measurement of Fluorescent Lamp Ballasts
ANSI C82.3-2002 荧光灯基准镇流器 Reference Ballasts for Fluorescent Lamps
ANSI C82.4-2002 高亮度放电灯和低压钠灯用镇流器(多路供电类型) Ballasts for High-Intensity Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type)
ANSI C82.5-1990 标准镇流器.高亮度放电和低压钠灯 Reference Ballasts - High-Intensity-Discharge and Low-Pressure Sodium Lamps
ANSI C82.6-2005 高亮度放电灯用标准镇流器.测量方法 Reference Ballasts for High-Intensity-Discharge Lamps - Methods of Measurement
ANSI C82.77-2001 灯镇流器.谐波发射限值.照明设备的动力质量要求 Lamp Ballasts-Harmonic Emission Limits-Related Power Quality Requirements for Lighting Equipment
ANSI/UL 1029-2007 高强度放电灯镇流器的标准 Standard for High-Intensity-Discharge Lamp Ballast
ANSI/UL 542-2005 荧光灯用起动器的安全标准 Standard for Safety for Starters for Fluorescent Lamps
ANSI/UL 879-2007 电信号元件标准(STP879的修改件) Standard for Electric Sign Components (revisions to STP 879)
ANSI/UL 935-2007 荧光灯镇流器的标准 Standard for Fluorescent-Lamp Ballasts
ANSI/UL 1574-2004 轨道照明装置 Track Lighting System
ANSI C136.16-2004 道路照明设备中封闭式柱顶安装照明灯具 Enclosed Post Top Mounted Luminaires in Roadway Lighting Equipment
ANSI C136.32-2006 道路和区域照明设备.高亮度放电灯用封闭延迟式照明装置和定向探照灯 Roadway and Area Lighting Equipment - Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge Lamps
ANSI/UL 1598A-2005 海船装置用灯具的安全标准 Standard for Safety for Luminaires for Installation on Marine Vessels
ANSI/UL 781-2003 危险（分级的）场所使用的便携式电照明设备 Portable Electric Lighting Units for Use in Hazardous (Classified) Locations
ANSI E1.9-2007 娱乐照明用灯具的报告光度计性能数据 Reporting Photometric Performance Data for Luminaires Used in Entertainment Lighting
ANSI/IESNA DG-3-2000 照明设计图纸上的照明符号应用的设计指南 Design Guide for Application of Luminaire Symbols on Lighting Design Drawings
ANSI/UL 1088-2005 临时照明线的安全标准 Standard for Safety for Temporary Lighting Strings
ANSI/UL 153-2005 便携式电灯安全标准 Standard for Safety for Portable Electric Luminaires
ANSI/UL 1598-2004 灯具的安全标准 Standard for Safety for Luminaires
ANSI/UL 588-2008 季节性和假日用装饰品的标准 Standard for Seasonal and Holiday Decorative Products (Proposal dated 6-1-07)
ANSI/UL 783-2003 危险（分等级）场所使用的电闪光灯和灯具 Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations
ANSI/UL 844-2006 电力照明固定设备在(分级)危险场所应用的安全性标准 Standard for Safety for Electric Lighting Fixtures for Use in Hazardous (Classified) Locations
ANSI C136.19-2004 道路照明.照明器具内高压钠灯.选择指南 Roadway Lighting - High-Pressure Sodium Lamps in Luminaires - Guide for Selection
ANSI C136.12-2004 道路照明设备用汞灯的选择指南 Mercury Lamps Used in Roadway Lighting Equipment, Guide for the Selection of
ANSI C136.15-2004 发光设备中高强度放电和低压钠灯的现场识别 High-Intensity-Discharge and Low-Pressure-Sodium Lamps in Luminaires, Field Identification of
ANSI C136.17-1995 水平发光高亮度放电灯用封闭侧装式照明装置的折射器的机械互换性 Refractors Used with Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps, Mechanical Interchangeability of
ANSI/ASTM D5071-1999 光降解塑料曝射用带水氙弧光型曝光设备操作惯例(08.03) Practice for Operating Xenon ARC-Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics (08.03)
ANSI ANSLGC 78.42-2007 高压钠灯 High-Pressure Sodium Lamps
ANSI ANSLGC 78.43-2007 单端金属卤化灯 Single-Ended Metal Halide Lamps
ANSI C136.26-2003 道路和区域照明设备.高压钠灯的故障排除指南 Roadway and Area Lighting Equipment - Trouble-shooting Guide for High-pressure Sodium Luminaires
ANSI C136.29-2007 道路和区域照明设备.金属卤素灯.选用指南 Roadway and Area Lighting Equipment - Metal Halide Lamps - Guide for Selection
ANSI C78.1381-1998 电灯.70瓦M85金属卤素灯 Electric Lamps - 70-Watt, M85 Metal-Halide Lamps
ANSI C78.1386-1998 电灯.100瓦特M91双端金属卤素灯 Electric Lamps - 100-Watt, M91 Double-Ended Metal-Halide Lamps
ANSI C78.1387-2001 电灯.250瓦特M80双端金属卤素灯 Electric Lamps - 250-Watt, M80 Double-Ended Metal Hailde Lamps
ANSI C78.1432-1997 电灯.GZ9.5双插头、预聚焦灯座和36.5mm标定光源中心长度的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length
ANSI C78.24-2001 带前盖和GU5.3或GX5.3底座的2in(51mm)整体反光灯 Two-Inch (51-mm) Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases
ANSI C78.30-1997 电灯:用于灯空间绘图准备的程序 Electric Lamps: Procedure for Use in Preparation of Lamp Space Drawings
ANSI C78.375-1997 荧光灯.电测量指南 Fluorescent Lamps - Guide for Electrical Measurements
ANSI C78.376-2001 荧光灯色度规范 Specifications for the Chromaticity of Fluorescent Lamps
ANSI C78.380-2007 高亮度放电灯命名方法 High-Intensity Discharge Lamps, Method of Designation
ANSI C78.389-2004 高强度放电灯.测量特性的方法 High-Intensity Discharge Lamps-Methods of Measuring Characteristics
ANSI C78.391-2004 电灯.T1和T1-3/4型小型灯的特性 Electric Lamps - Characteristics of Miniature Lamps of T1 and T1-3/4 Shapes
ANSI C78.40-1992 水银灯用规范 Specifications for Mercury Lamps
ANSI C78.40a-1998 电灯.水银灯规范.BT56灯泡的最大外形图.56页 Electric Lamps - Specifications for Mercury Lamps - Maximum Outline Drawing of Bulb BT56, page 56
ANSI C78.41-2006 高亮度放电灯.低压钠灯 High-Intensity Discharge Lamps - Low Pressure Sodium Lamps
ANSI C78.81-2005 电灯.双端荧光灯.尺寸和电特性 Electric lamps-Double-capped fluorescent lamps-Dimensional and Electrical Characteristics
ANSI C78.LL 1256-2003 电灯.荧光灯样品制备和毒性浸出过程 Electric Lamps-Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
ANSI C78.LL 3-2003 电灯.高强度放电灯用程序.样品制备和毒性浸出程序 Electric Lamps - Procedures for High Intensity Discharge Lamp - Sample Preparation and the Toxicity Characteristic Leaching Procedure
ANSI/IEC C78.1195-2001 双管荧光灯.安全规范 Double-Capped Fluorescent Lamps - Safety Specifications
ANSI/IEC C78.1199-2001 单端荧光灯.安全规范 Single-Capped Fluorescent Lamps - Safety Specifications
ANSI/IEC C78.62035-2004 放电灯(不包括荧光灯).安全规范 Discharge Lamps (excluding fluorescent lamps) - Safety Specifications
ANSI/IEC C78.901-2005 电灯.单头荧光灯.尺寸和电气特性 Electric Lamps - Single-Ended Fluorescent Lamps - Dimensional and Electrical Characteristics
ANSI/IESNA LM-73-2004 使用白炽灯或者高强度放电灯的娱乐照明灯具的光度试验的IESNA验收方法 IESNA Approved Method for Photometric Testing of Entertainment Lighting Luminaires Using Incandescent Filament Lamp or High Intensity Discharge Lamps
ANSI/UL 1598B-2005 预装荧光灯具用照明反射组件的补充要求 Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires
ANSI C136.1-2004 道路照明.白炽灯.选择指南 Roadway Lighting - Filament Lamps - Guide for Selection
ANSI C78.379-2006 电灯.反光灯束方向特性分类 Electric Lamps - Classification of the Beam Patterns of Reflector Lamps
ANSI C78.1385-1998 电灯.150瓦特M81双端金属卤素灯 Electric Lamps - 150-Watt, M81 Double-Ended Metal-Halide Lamps
ANSI C78.1401-2004 双触点、中等环、灯头向上型投影灯的规格 Projection Lamps, Double-Contact, Medium Ring, Base-Up Type, Dimensions of
ANSI C78.1402-2004 四脚、预聚焦、灯头向下型放映灯的规格 Projection Lamps, Four-Pin, Prefocus, Base-Down Type, Dimensions for
ANSI C78.1403-1997 电灯.带有G6.35、GX.35和GY6.35基座的卤钨灯 Electric Lamps - Tungsten Halogen Lamps with G6.35, GX.35 and GY6.35 Bases
ANSI C78.1406-2004 灯头向下型单触点、中聚焦放映灯的规格 Projection Lamps, Single-Contact, Medium Prefocus, Base-Down Type, Dimensions of
ANSI C78.1407-2004 四脚、预聚焦型聚光反射器的放映灯的规格 Projection Lamps, Condenser-Reflector, Four-Pin, Prefocus-Base Types, Dimensions for
ANSI C78.1408-2004 电灯.CBA放映灯 Electric Lamps - CBA Projection Lamps
ANSI C78.1413-2001 电灯.2英寸(51mm)整体反射镜边缘标准投射灯.尺寸 Electric Lamps - Two-Inch (51-mm) Integral-Reflector-Rim Reference Projection Lamps - Dimensions of Centering Systems
ANSI C78.1417-1997 电灯.带有w/GX5.3或GY5.3基座的1.65英尺(42mm)整体反射镜边缘的标准投射灯.尺寸和中心系统 Electric Lamps - 1.65 Inch (42-mm) Integral Reflector, Rim Reference Projection Lamps w/GX5.3 or GY5.3 Bases - Dimensional & Centering System
ANSI C78.1420-2001 电灯.缩微胶片投影灯.GX5.3基座的2英寸(50mm)内二色性涂层反射边绝的标准卤钨灯 Electric Lamps - Microfilm Projection Lamps-Two-inch (51mm) Dichroic Coated Integral Reflector, Rim Reference, Tungsten Halogen Lamps with GX5.3 Bases
ANSI C78.1421-2002 投射灯尺寸和聚光系统.GZ4基座的35mm整体反射镜边缘标准灯 Dimensions and Centering Systems for Projection Lamps - 35mm Integral Reflector Rim Reference Lamps with GZ4 Bases
ANSI C78.1430-1997 电灯.幻灯放映机灯.带GX5.3基座的冷凝、二色性、1.65Inch(42mm)、带整体反射镜的边缘标准卤钨灯 Electric Lamps - Slide Projector Lamps - Condensing, Dichroic, 1.65-Inch (42mm), Integral Reflector Rim-Reference Tungsten-Halogen Lamps with GX5.3 Bases
ANSI C78.1431-1997 电灯:幻灯放映机灯:带GY5.3基座的冷凝、二色性、2英寸(51mm)、带整体反光镜的边缘标准卤钨灯 Electric Lamps: Slide Projector Lamps: Condensing, Dichroic, 2-Inch (51-mm), Integral Reflector, Rim-Reference Tungsten-Halogen Lamps with GY5.3 Bases
ANSI C78.1433-2001 带有GX5.3基座的2英寸(51mm)整体反射边缘标准卤钨大屏幕投射灯 Two-Inch (51-mm) Dichroic Coated Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX 5.3 Bases
ANSI C78.1434-2001 带GX7.9基座的冷凝二色性涂层整体反光侧钉的卤钨投射灯 Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases
ANSI C78.1435-2002 投射灯.带G5.3基座的卤钨灯 Projection Lamps - Tungsten-Halogen Lamps with G5.3 Bases
ANSI C78.1450-1983 电灯.白炽投影灯.寿命检验的方法 Incandescent Projection Lamps - Method for Life Testing
ANSI C78.1451-2002 钨-卤素灯保护罩使用.注意事项 Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice
ANSI C78.1460-2004 GZ9.5基座,T6灯泡,36.5毫米LCL,76.2毫米MOL,有近反射器的单端钨卤素灯 Single-Ended Tungsten-Halogen Lamps, GZ9.5 Base, T6 Bulb, 36.5 mm LCL, 76.2 mm MOL with Proximity Reflector
ANSI C78.1500-2001 电灯.带P28型基座和89mmLCL的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 89 mm LCL
ANSI C78.1501-2001 电灯.带G22型基座和63.5mmLCL的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with G22 Bases and 63.5 mm LCL
ANSI C78.1503-2001 电灯.带G9.5型基座和60.5mmLCL的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL
ANSI C78.1504-2001 电灯.带P28型基座和55.5mmLCL的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL
ANSI C78.1505-2001 电灯.带G38型基座和127mmLCL的卤钨灯 Electric Lamps - Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL
ANSI C78.20-2003 白炽灯.带E26中型螺纹灯座的A、G、PS和类似形状的白炽灯特性 Incandescent Lamps - A, G, PS, and Similar Shapes with E26 Medium Screw Bases
ANSI C78.21-2003 白炽灯.PAR和R型 Incandescent Lamps - PAR and R Shapes
ANSI C78.22-1995 荧光灯.带E39大型螺口灯头的A、G、PS型及相似的类型 Incandescent Lamps - A, G, PS, and Similar Shapes with E39 Mogul Screw Bases
ANSI C78.23-1995 电灯.白炽灯.各种类型 Electric Lamps - Incandescent Lamps - Miscellaneous Types
ANSI C78.260-2002 钨卤素管灯.物理性能 Tubular Tungsten-Halogen Lamps, Physical Characteristics
ANSI C78.261-1997 红外线管状白炽灯规范 Tubular Incandescent Infrared Lamps, Specification for
ANSI C78.381-1961 辉光灯.命名方法 Glow Lamps - Method of Designation
ANSI C78.385-1961 辉光灯.测量的方法 Glow Lamps - Methods of Measurement
ANSI C78.390-2006 电灯的命名方法.微型和封闭白炽聚光灯 Method of Designation for Electric Lamps - Miniature and Sealed-Beam Incandescent Lamps
ANSI C78.60432.1-2003 白炽灯.安全规范.第I部分:家用和类似一般照明用钨丝灯 Incandescent Lamps - Safety Specifications - Part I: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes
ANSI C78.60432.2-2004 电灯.白炽灯.安全规范.家用和类似一般照明用钨卤灯.第2部分 Electric Lamps - Incandescent Lamps - Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes - Part 2
ANSI C78.LL 4-2003 电灯.白炽灯样品制备和毒性特征浸出过程规程 Electric Lamps - Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
ANSI/ANSLG C78.60432.3-2007 白炽灯.安全规范.第III部分:卤素电灯(非车辆用) Incandescent Lamps - Safety Specifications - Part III: Tungsten Halogen Lamps (non vehicle)
ANSI/UL 2388-2006 柔性照明产品的安全标准 Standard for Safety for Flexible Lighting Products
ANSI C136.11-2006 道路和地区照明设备.复式灯座 Roadway and Area Lighting Equipment - Multiple Sockets
ANSI C136.6-2004 道路照明设备.路灯的金属头和反光器组件.机械互换性与光学互换性 Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability
ANSI C136.4-2003 道路照明设备.系列插座和系列插座插孔 Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles
ANSI C78.60360-2002 电灯.测量灯罩温升的标准方法 Electric Lamps- Standard Method of Measurement of Lamp Cap Temperature Rise
ANSI C81.62a Supplement-1993 电灯头架.补充件 Lampholders for electric lamps; Supplement
ANSI C81.63a Supplement-1993 电灯座和灯头架的量规.补充件 Gauges for electric lamp bases and lampholders; Supplement
ANSI C81.63p-1997 电灯基座和灯头量规.E10小型螺纹灯和非固定基座的不过端环量规 Gauges for Electric Lamp Bases and Lampholders: "Not-Go" Ring Gauge for E10 Miniature Screw-Based Lamps and Unmounted Bases
ANSI C81.64-2005 电灯灯头、灯座和量规的一般信息和指南 Guidelines and General Information for Electrical Lamp Bases, Lampholders, and Gauges
ANSI/ANSLG C81.61-2007 电灯灯座 Electrical Lamp Bases
ANSI/ANSLG C81.62-2007 电灯灯座 Electric Lamp Lampholders
ANSI/ANSLG C81.63-2007 电灯基座和灯座量规 Gauges for Electric Lamp Bases and Lampholders
ANSI/UL 496-2004 爱迪生螺纹灯座 Edison Base Lampholders
ANSI/IESNA RP-16-2005 照明工程的命名和定义 Nomenclature and Definitions for Illuminating Engineering
ANSI C78.MR 11-2-1997 电灯.带前盖和GU4或GZ4基座的1.375英寸(35mm)整体反光灯 Electric Lamps - 1.375 Inch (35 mm) Integral Reflector Lamps with Front Covers and GU4 or GZ4 Bases
ANSI C82.12-1999 荧光灯适配器 Fluorescent Adapters
ANSI/IEC C78.MR 11-2-1997 电灯.带前盖和GU4或GZ4钉座的1.375英寸(35 mm)整体反射灯 Electric Lamps - 1.375 Inch (35 mm) Integral Reflector Lamps with Front Covers and GU4 or GZ4 Bases
ANSI/IESNA RP-27.2-2000 用于照明灯具和照明系统的光生物学安全的推荐规程.测量技术 Recommended Practice on Photobiological Safety for Lamps and Lamp Systems - Measurement Techniques
ANSI/NEMA ANSLGC 78.377-2008 电灯用固态照明产品色度的规范 Specifications for the Chromaticity of Solid State Lighting Products for Electric Lamps
ANSI C37.22-1997 用于金属封闭开关设备的室内交流电中压开关优选额定值和相关要求性能 Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear
ANSI/IEEE 421.3-1997 同步电机励磁系统高压试验要求 High Potential Test Requirements for Excitation Systems for Synchronous Machines
ANSI/IEEE 421.4-2004 励磁系统规范制订指南 Guide for the Preparation of Excitation System Specifications
ANSI/IEEE C37.20.2-1999 金属壳台式组合开关设备 Metal-Clad and Station-Type Cubicle Switchgear
ANSI/IEEE C37.20.3-2001 金属壳封闭中断开关装置的标准 Standard for Metal-Enclosed Interrupter Switchgear

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点