畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/IEEE C37.21-2005 控制配电盘标准 Standard for Control Switchboards
ANSI/IEEE C37.59-2002 电源开关设备转换要求 Requirements for Conversion of Power Switchgear Equipment
ANSI/UL 67-2006 配电盘的安全标准 Standard for Safety for Panelboards
ANSI/UL 891-2005 不露带电部分的配电盘 Dead-Front Switchboards (Bulletin dated 11/4/02)
ANSI C37.50-1989 开关设备.封装式低压交流电力线路断路器.试验程序 Switchgear - Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures
ANSI C37.51-2003 金属封装低压交流电力断路器开关设备组件.合格试验规程 Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures
ANSI/IEEE 1325-1996 动力线路断路器场失效报告的推荐实施规程 Recommended Practice for Reporting of Power Circuit Breaker Field Failures
ANSI/IEEE C37.14-2002 外壳用低压直流电力断路器 Low-Voltage DC Power Circuit Breakers Used in Enclosures
ANSI/IEEE C37.20.1-2002 带金属包壳的低压电力断路开关设备 Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
ANSI/IEEE C37.20.1a-2005 金属壳密封的低压电力线路断路器开关设备标准.修改1:短时间和短路可耐电流测试;多电缆连接的最小区域 Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections
ANSI/IEEE C37.20.1b-2006 金属密封的低压电力断路器开关设备标准.修改件2:直流电(DC)牵引电力开关控制和辅助电力布线的附加要求 Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear
ANSI/IEEE C37.20.7-2007 指南测试金属封闭开关设备可达38kv内部电弧故障 Guide for Testing Metal-Enclosed Switchgear Rated Up to 38kV for Internal Arcing Faults
ANSI/IEEE C37.26-2003 低压感应测试电路功率因数的测量方法 Methods of Power-Factor-Measurement for Low-Voltage Inductive Test Circuits
ANSI/NEMA PB2.1-2003 额定电压600伏或以下的不露带电部分的配电开关板的适当处理、安装、操作和维修的一般说明 General Instructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
ANSI/UL 508-2005 工业控制设备 Industrial Control Equipment
ANSI/UL 60947-1-2007 低压开关设备和控制设备的安全标准.第1部分:总则 Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules
ANSI/UL 60947-4-1-2007 低压开关设备和控制设备的安全标准.第4-1部分:电流接触器和电动机起动器.电机接触器和电动机起动器 Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
ANSI/UL 60947-5-2-2007 低压开关设备和控制设备的安全标准.第5-2部分:控制电路装置和开关元件.近接开关 Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches
ANSI/UL 60947-7-1-2004 铜导线用接线端子排标准 Standard for Terminal Blocks for Copper Conductors
ANSI/UL 60947-7-2-2004 铜导线用保护导线接线端子排的标准 Standard for Protective Conductor Terminal Blocks for Copper Conductors
ANSI C37.06.1-2000 快速瞬时恢复压升时间(非美国标准)用指定对称电流基础额定值的高压断路器试用指南 Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recovery Voltage Rise Times" (NOT AN AMERICAN NATIONAL STANDARD)
ANSI C37.06-2000 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能 Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities
ANSI C37.06a-1989 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能 Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities
ANSI C37.121-1989 开关设备.成套变电所.要求 Switchgear - Unit Substations - Requirements
ANSI C37.32-2002 高压空气断路开关、断路器开关、错误初始开关、接地开关、总线支架和附件控制电压范围.优选额定值、制造指南和规范一览表 High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges - Schedule of Preferred Ratings, Construction Guidelines and Specifications
ANSI C37.54-2003 金属封装开关组件中作为可拆除元件的室内交流高压断路器的一致性试验程序 Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies
ANSI C37.55-2003 金属覆层中压开关装置组件.一致性试验程序 Medium Voltage Metal-Clad Switchgear Assemblies - Conformance Test Procedures
ANSI C37.57-2003 开关装置.金属封装断路器开关装置组件.一致性试验 Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing
ANSI C37.58-2003 金属封装的开关设备中使用的室内交流中压开关的一致性试验程序 Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear
ANSI C37.85-2002 电力开关用交流高压电力真空断路器的X射线辐射极限 Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum
ANSI/IEEE 1216-2000 200A、单相地下室居住(URD)用故障电路指示器的应用指南 Guide for the Application of Faulted Circuit Indicators for 200A, Single-Phase Underground Residential Development (URD)
ANSI/IEEE C37.100.1-2007 1000V以上的额定高压电源开关的一般要求标准 Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
ANSI/IEEE C37.11-1997 对称电流基础上的AC高压断路器的电气控制标准要求 Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI/IEEE C37.121-1989 开关装置.单元变电所.要求 Switchgear - Unit Substations - Requirements
ANSI/IEEE C37.20.4-2001 金属外壳开关设备用室内交流开关(1kV-38kV)标准 Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear
ANSI/IEEE C37.20.6-2003 封装壳体内使用的额定电压为4.76 kV至38 kV的接地和试验装置的标准 Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
ANSI/IEEE C37.24-2003 评价太阳辐射对室外铠装开关装置影响的指南 Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Clad Switchgear
ANSI/IEEE C37.30-1997 高压空气开关、绝缘子和母线支撑的定义和要求 Switches, Insulators and Bus Supports, Definitions and Requirements for High-Voltage Air
ANSI/IEEE C37.45-2007 额定电压为1～8.3kV的高压封闭式单极空气配电开关的标准规范 Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV
ANSI/NECA 400-2007 安装和维护配电盘用标准 Standard for Installing and Maintaining Switchboards
ANSI/NEMA PB1.1-2003 额定电压等于或小于600V的配电盘正确安装、操作和维修的通用说明书 General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less
ANSI/UL 347-2000 工业用高压控制设施安全性标准 Standard for Safety for High Voltage Industrial Control Equipment
ANSI/IEEE C37.232-2007 命名时序数据文件的推荐实施规程 Recommended Practice for Naming Time Sequence Data Files
ANSI/IEEE 1291-1993 电力开关设备局部放电测量指南 Guide for Partial Discharge Measurements in Power Switchgear
ANSI/IEEE 1613-2003 电力变电站的通信网络装置的标准环境和试验要求 Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations
ANSI/IEEE 1613Corrigendum 1-2006 变电所通信网络装置的标准环境和试验要求.技术勘误1 Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations - Corrigendum 1
ANSI/IEEE C37.100-1992 电源开关装置的定义 Definitions for Power Switchgear
ANSI/IEEE C37.74-2003 38kv及以下的交流系统用地下、地下室及底座安装型负载中断开关设备和熔融中断开关设备的标准要求 Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
ANSI/IEEE C37.81-1989 1E类金属壳电源开关装置组件的抗震合格鉴定 Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
ANSI/IEEE C37.82-1987 应用于核电站的1E级装置用开关装置组件的合格鉴定 Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations, Qualification of
ANSI/NECA 430-2006 常压开关设备安装标准 Standard for Installing Medium-Voltage Switchgear
ANSI/ASTM D2671-2000 电气用热收缩管道系统的试验方法 Test Methods for Heat-Shrinkable Tubing for Electrical Use
ANSI/NEMA OS1-2003 薄钢板制出线箱、器件箱、箱盖和箱支架 Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/NEMA OS2-2003 非金属材料制出线箱、器件箱、箱盖和箱支架 Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/IEEE C37.116-2007 传输线串联电容器组用保护继电器的指南 Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks
ANSI/EIA 473-1981 电子设备用继电器的定义和术语 Relays for Electronic Equipment, Definitions and Terminology for
ANSI/IEEE C37.103-2003 差动和偏振继电器电路试验指南 Guide for Differential and Polarizing Relay Circuit Testing
ANSI/IEEE C37.106-2003 发电厂不规则频率保护指南 Abnormal-Frequency Protection for Power Generating Plants, Guide for
ANSI/IEEE C37.112-1996 过流继电器的标准反时特性（曲线） Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/IEEE C37.113-1999 传输线路保护继电器应用指南 Guide for Protective Relay Application to Transmission Lines
ANSI/IEEE C37.117-2007 不规则频率荷载降低和复位用保护继电器的应用指南 Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration
ANSI/IEEE C37.230-2007 指南继电保护申请配电线路 Guide for Protective Relay Applications to Distribution Lines
ANSI/IEEE C37.90.1-2002 保护继电器和继电器系统的抗浪涌干扰能力试验 Surge Withstand Capability (SWC) Tests for Protective Relays and Relay Systems
ANSI/IEEE C37.90.2-2004 中继系统对无线电收发机辐射电磁干扰的抵抗能力标准 Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
ANSI/IEEE C37.90.3-2001 防护继电器用标准静电放电试验 Standard Electrostatic Discharge Tests for Protective Relays
ANSI/IEEE C37.91-2000 电力变压器的保护继电器应用指南 Protective Relay Applications to Power Transformers, Guide for
ANSI/IEEE C37.92-2005 保护电压和电流传感器中继电器的模拟输入标准 Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers
ANSI/IEEE C37.93-2004 电话信道上可听音电源系统保护继电器应用指南 Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels
ANSI/IEEE C37.95-2002 用户使用的互连设备继电保护指南 Protective Relaying of Utility-Consumer Interconnections, Guide for
ANSI/IEEE C37.97-1991 电源系统总线的保护继电器应用指南 Guide for Protective Relay Applications to Power System Buses
ANSI/IEEE C37.98-1987 继电器的测震检验 Seismic Testing of Relays
ANSI/SAE J156-1986 熔断体 Fusible Links
ANSI C37.46-2000 电力熔断器和熔丝切断开关规范 Power Fuses and Fuse Disconnecting Switches, Specifications for
ANSI C37.47-2000 配电熔断式断路开关、熔断支座和限流熔断器的规范 Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-Limiting Fuses, Specifications for
ANSI/ASTM F1207/F 1207M-1997 监测有源电系统中地面阻抗的电绝缘监控器的标准规范 Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems
ANSI/ASTM F1207-1997 监视激活电子系统接地电阻用电绝缘监视器规范 Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems
ANSI/ASTM F1507-2000 船用电涌抑制器标准规范 Specification for Surge Suppressors for Shipboard Use
ANSI/EIA 772-2001 熔断器的用户应用指南 Users Application Guide to Fuses
ANSI/EIA-772-2001 熔断器的用户使用指南 Users Application Guide to Fuses
ANSI/IEEE 1015/Cor1-2007 工业和商业电力系统用低压电路断路器应用的推荐实施规程.技术勘误1 Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - Corrigendum 1
ANSI/IEEE 142-2007 工业和商业电力系统接地的推荐实施规程 Recommended Practice for Grounding of Industrial and Commercial Power Systems
ANSI/IEEE 1623-2004 动态电压补偿用中压(1 kV至35 kV)电子分流装置的功能规范指南 Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
ANSI/IEEE 551-2006 工业和商用电力系统计算交流短路电流的推荐方法 Recommended Methods for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems
ANSI/IEEE 80-2000 交流变电站接地安全性 AC Substation Grounding, Safety in
ANSI/IEEE 837-2002 变电站接地用合格的永久性联接件 Qualifying Permanent Connections Used in Substation Grounding
ANSI/IEEE C37.10.1-2000 断路器监控选用指南 Guide for the Selection of Monitoring for Circuit Breakers
ANSI/IEEE C37.104-2002 交流配电线和输电线用户线断路器自动重闭指南 Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines
ANSI/IEEE C37.119-2005 电力线路断路器的断路器故障保护指南 Guide for Breaker Failure Protection of Power Circuit Breakers
ANSI/IEEE C37.60-2003 交流系统用架空、座垫安装式、干燥地下室型和浸没式自动电路重合闸和故障断路器的要求 Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible
ANSI/IEEE C37.60-2003/Cor 1-2004 38kV及以下交流系统用架空底座安装型、干燥地下室型和浸入式电路自动重合开关和故障断路器的要求标准 Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV - Corrigendum 1
ANSI/IEEE C57.12.44-2005 二级网络保护装置要求 Requirements for Secondary Network Protectors
ANSI/IEEE C62.21-2003 1000V及以上的交流旋转电机上浪涌电压保护设备的应用指南 Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 Volts and Greater
ANSI/IEEE C62.31-2006 低压充气管式电涌保护装置的标准试验规范 Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components
ANSI/IEEE C62.32-2004 气隙电涌防护装置(阀门和冲出式装置除外)的低压试验规范 Air Gap Surge-Protective Devices (Excluding Valve and Expulsion-Type Devices), Test Specifications for the Low-Voltage
ANSI/IEEE C62.33-1982 变阻器电涌保护装置试验规范 Varistor Surge-Protective Devices, Test Specifications for
ANSI/IEEE C62.34-1996 低压电涌保护设备的性能(二次避雷器) Performance of Low-Voltage Surge Protective Devices (Secondary Arresters)
ANSI/IEEE C62.35-1987 雪崩接合半导体电涌保护装置标准试验规范 Standard Test Specifications for Avalanche Junction Semiconductor Surge-Portective Devices
ANSI/IEEE C62.36-2000 低压数据通信和信令电路用电涌保护器.标准试验方法 Surge Protectors Used in Low Voltage Data Communications and Signaling Circuits, Standard Test Methods
ANSI/IEEE C62.41.1-2002 低压(1000V及1000V以下)交流电力电路的电涌环境指南 Guide on the Surge Environment in Low-Voltage (1000 V and Less) AC Power Circuits
ANSI/IEEE C62.41.2-2002 低压(1000 V和其以下)的交流电路的电涌特性推荐规范 Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits
ANSI/IEEE C62.42-2005 合成电涌保护装置低压下(等于或小于1000Vrms或1200V直流)电路的应用指南 Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage (Equal to or Less Than 1000 Vrms or 1200 Vdc) Circuits
ANSI/IEEE C62.43-2005 低压(等于或低于1000Vrms或1200Vdc)数据、通信和信号电路用过电压保护器应用指南 Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less Than 1000 Vrms or 1200 Vdc) Data, Communications and Signaling Circuits
ANSI/IEEE C62.45-2002 与低压交流电路连接的设备的电涌试验指南 Equipment Connected to Low-Voltage AC Power Circuits, Guide on Surge Testing for
ANSI/IEEE C62.48-2005 电力系统干扰和过压保护装置之间相互作用的指南 Guide on Interactions Between Power System Disturbances and Surge Protective Devices
ANSI/IEEE C62.62-2000 低压交流电路电涌保护装置试验规范 Test Specifications for Surge-Protective Devices for Low Voltage AC Power Circuits
ANSI/IEEE C62.72-2007 低压(1000V或1000V以下)交流电力电路用过电压保护装置的应用指南 Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
ANSI/IEEE C62.92.1-2000 电力设施系统中线接地应用指南.第1部分:说明 Guide for the Application of Neutral Grounding in Electric Utility Systems - Part 1 - Introduction
ANSI/IEEE C62.92.2-1989 公用电力系统中线接地应用指南.第2部分:同步发电机系统电涌保护器件的接地 Application Guide for Neutral Grounding in Electric Utility Systems - Part 2 - Grounding of Synchronous Generator Systems Surge Protective Devices
ANSI/IEEE C62.92.3-1993 发电机辅助系统中性接地应用指南 Applicaton Guide for Neutral Grounding of Generator Auxiliary Systems
ANSI/IEEE C62.92.4-1991 配电设备系统中性接地应用指南.第4部分:布线 Application Guide for Neutral Grounding of Distribution Systems - Part 4
ANSI/IEEE C62.92.5-1992 公共用电系统中性接地应用指南.第5部分:输电系统和子输电系统 Guide for the Application of Neutral Grounding in Electric Utility Systems, Part V - Transmission Systems and Subtransmission Systems
ANSI/NECA 420-2007 保险丝应用标准 Standard for Fuse Applications
ANSI/NEMA FU1-2004 低压管式熔断体 Low Voltage Cartridge Fuses
ANSI/NEMA GR1-2007 接地棒和接地棒联结器 Ground Rods and Ground Rod Couplings
ANSI/UL 1053-1999 接地故障传感设备和继电设备 Ground-Fault Sensing and Relaying Equipment
ANSI/UL 1077-2008 电气设备用辅助保护器用安全标准 Standard for Safety for Supplementary Protectors for Use in Electrical Equipment
ANSI/UL 1449-2006 电泳保护装置安全标准 Standard for Safety for Surge Protective Devices
ANSI/UL 1472-2006 固态微光控制器安全标准 Standard for Safety for Solid-State Dimming Controls
ANSI/UL 198M-2003 矿山用熔断器的安全标准 Standard for Safety for Mine-Duty Fuses
ANSI/UL 248-10-2004 低压熔断器安全标准.第10部分:L类熔断器 Standard for Safety for Low-Voltage Fuses - Part 10: Class L Fuses
ANSI/UL 248-11-2005 低压熔断器安全标准.第11部分:插入式熔断器 Standard for Safety for Low-Voltage Fuses - Part 11: Plug Fuses
ANSI/UL 248-1-2005 低压熔断器安全标准.第1部分:一般要求 Standard for Safety for Low-Voltage Fuses - Part 1: General Requirements
ANSI/UL 248-12-2005 低压熔断器安全标准.第12部分:R类熔断器 Standard for Safety for Low-Voltage Fuses - Part 12: Class R Fuses
ANSI/UL 248-13-2005 低压熔断器安全标准.第13部分:半导体熔断器 Standard for Safety for Low-Voltage Fuses - Part 13: Semiconductor Fuses
ANSI/UL 248-14-2005 低压熔断器安全标准.第14部分:辅助熔断器 Standard for Safety for Low-Voltage Fuses - Part 14: Supplemental Fuses
ANSI/UL 248-15-2005 低压熔断器安全标准.第15部分:T类熔断器 Standard for Safety for Low-Voltage Fuses - Part 15: Class T Fuses
ANSI/UL 248-16-2004 低压熔断器安全标准.第16部分:试验限制器 Standard for Safety for Low-Voltage Fuses - Part 16: Test Limiters
ANSI/UL 248-2-2005 低压熔断器安全标准.第2部分:C类熔断器 Standard for Safety for Low-Voltage Fuses - Part 2: Class C Fuses
ANSI/UL 248-3-2005 低压熔断器安全标准.第3部分:CA和CB类熔断器 Standard for Safety for Low-Voltage Fuses - Part 3: Class CA and CB Fuses
ANSI/UL 248-4-2005 低压熔断器安全标准.第4部分:CC类熔断器 Standard for Safety for Low-Voltage Fuses - Part 4: Class CC Fuses
ANSI/UL 248-5-2005 低压熔断器安全标准.第5部分:G类熔断器 Standard for Safety for Low-Voltage Fuses - Part 5: Class G Fuses
ANSI/UL 248-6-2005 低压熔断器安全标准.第6部分:H类不可更新熔断器 Standard for Safety for Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
ANSI/UL 248-7-2005 低压熔断器安全标准.第7部分:H类可更新熔断器 Standard for Safety for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
ANSI/UL 248-8-2005 低压熔断器安全标准.第8部分:J类熔断器 Standard for Safety for Low-Voltage Fuses - Part 8: Class J Fuses
ANSI/UL 248-9-2005 低压熔断器安全标准.第9部分:K类熔断器 Standard for Safety for Low-Voltage Fuses - Part 9: Class K Fuses
ANSI/UL 4248-11-2007 熔断器支持件安全标准.第11部分:C型(爱迪生底座)和S型插入式熔断器 Standard for Safety for Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
ANSI/UL 4248-1-2007 熔断器支架安全标准.第1部分:一般要求 Standard for Safety for Fuseholders - Part 1: General Requirements
ANSI/UL 4248-12-2007 熔断器支架安全标准.第12部分:R类 Standard for Safety for Fuseholders - Part 12: Class R
ANSI/UL 4248-15-2007 熔断器支架安全标准.第15部分:T类 Standard for Safety for Fuseholders - Part 15: Class T
ANSI/UL 4248-4-2007 熔断器支架安全标准.第4部分:CC类 Standard for Safety for Fuseholders - Part 4: Class CC
ANSI/UL 4248-5-2007 熔断器支架安全标准.第5部分:G类 Standard for Safety for Fuseholders - Part 5: Class G
ANSI/UL 4248-6-2007 熔断器支架安全标准.第6部分:H类 Standard for Safety for Fuseholders - Part 6: Class H
ANSI/UL 4248-8-2007 熔断器支架安全标准.第8部分:J类 Standard for Safety for Fuseholders - Part 8: Class J
ANSI/UL 4248-9-2007 熔断器支架安全标准.第9部分:K类 Standard for Safety for Fuseholders - Part 9: Class K
ANSI/UL 467-2007 接地和连接装置 Grounding and Bonding Equipment
ANSI/UL 497-2004 双导线通信电路保护器的安全标准 Standard for Safety for Protectors for Paired Conductor Communications Circuits
ANSI/UL 497A-2004 通信线路的二级保护器 Secondary Protectors for Communication Circuits
ANSI/UL 497B-2004 数据通信和火警线路用保护器 Protectors for Data Communication and Fire Alarm Circuits
ANSI/UL 497C-2004 同轴通信电路用保护器 Protectors for Coaxial Communications Circuits
ANSI/UL 60691-2003 电气设备和元件用断热器装置 Thermal-Links - Requirements and Application Guide
ANSI/UL 60947-7-3-2005 熔丝接线板标准 Standard for Fuse Terminal Blocks
ANSI/UL 943-2008 接地故障电路断路器用安全标准 Standard for Safety for Ground-Fault Circuit-Interrupters
ANSI/UL 977-2003 熔断的电力线路装置 Fused Power-Circuit Devices
ANSI C37.16-2000 低压电力断路器和交流电力电路保护器的优选额定值、相关要求和应用建议 Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors, Preferred Ratings, Related Requirements and Application Recommendations for
ANSI C37.17-1997 交流和通用直流低压电力断路器的断开装置 Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers
ANSI C37.33a Supplement-1990 转换开关装置.高电压空气转换开关.额定控制电压及其范围：补充件 Switchgear - High-voltage air switches - Rated control voltages and their ranges; Supplement
ANSI/EIA 446-3-1981 0.750方形底座，1销和2销0.001到10安培的有指示灯和无指示灯的按钮开关 Pushbutton Switches, Illuminated and Nonilluminated, 0.750 Square Mounting, 1 and 2 Poles, 0.001 to 10 Amperes
ANSI/EIA 446-4-1981 0.625方形底座,1销和2销,1安的有指示灯和无指示灯，非灵敏按钮开关的详细规范 Pushbutton Switches 0.625 Sq Mounting, One and Two Pole, 1.0 Ampere, Detail Specification for Illuminated and Non-Illuminated Non-Sensitive
ANSI/EIA 446-A-1981 非灵敏按钮开关 Non-Sensitive Pushbutton Switches
ANSI/EIA 448-21A-2000 机电元件的试验标准.开关.用红外系统法确定机械焊接的交替环境效应 Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System
ANSI/EIA 480-1981 拨动开关 Toggle Switches
ANSI/EIA 498AA00-1992 键盘开关的空白详细规范 Keyboard Switches, Blank Detail Specification for
ANSI/EIA 5200000-D-2000 已质量认证的专用电机开关的总规范 Generic Specification for Special-Use Electromechanical Switches of Certified Quality
ANSI/EIA 520A000-A-1992 质量认证的按扣开关分规范 Sectional Specification for Pushbutton Switches of Certified Quality
ANSI/EIA 520AAAA-A-1991 单极接触式非灵敏按钮开关的详细规范 Non-Sensitive Pushbutton Switch Single-Pole Contact, Detail Specification for
ANSI/EIA 520AAAB-A-1991 瞬时接触式非灵敏按钮开关的详细规范 Detail Specification for Non-Sensitive Pushbutton Switch Momentary Contact
ANSI/EIA 520C000-1987 分规范 ：已质量认证的灵敏开关 Sectional Specification: Sensitive Switches of Certified Quality
ANSI/EIA-448-21A-2000 机电元件-开关的试验标准.用红外系统的机械钎焊的环境影响 Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System
ANSI/EIA-5200000-D-2000 经质量认证的专用电机开关的通用规范 Generic Specification for Special-Use Electromechanical Switches of Certified Quality
ANSI/IEEE 1015-2006 工业和商业电力系统用低压断路器的推荐实施规程(蓝皮书) Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems (Blue Book)
ANSI/IEEE 1247-2005 额定电压大于1000伏的交流断路开关标准 Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts
ANSI/IEEE C37.010-1999 基于对称电流的交流高压断路器应用指南 Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI/IEEE C37.011-2005 交流高压断路器瞬时恢复电压的应用指南 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
ANSI/IEEE C37.012-2005 交流高压断路器用电容性电流开关的应用指南 Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
ANSI/IEEE C37.013a-2007 基于平衡电流的交流高压电路断路器的标准.修改件1:额定电压10-100MVA的发电机的补充件 Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Supplement for Use with Generators Rated 10-100 MVA
ANSI/IEEE C37.04-1999 交流高压断路器用标准额定结构 Standard Rating Structure for AC High-Voltage Circuit Breakers
ANSI/IEEE C37.081-1981 基于对称原理的额定交流高压断路器的综合故障检测指南 Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Basis, Guide for Synthetic
ANSI/IEEE C37.081a-1998 额定对称电流基础上的交流高压断路器的综合故障试验指南 Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI/IEEE C37.082-1982 交流电流断路器声压级的测量 Standard Methods for the Measurement of Sound Pressure Levels for AC Power Circuit Breakers
ANSI/IEEE C37.083-1999 交流高压断路器的合成电容电路开关试验指南 Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers
ANSI/IEEE C37.09-1999 基于对称电流的额定交流高压断路器用标准试验程序 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis [Also C37.09a-2005 and C37.09-1999/Cor1-2007]
ANSI/IEEE C37.09-1999/Cor 1-2007 基于平衡电流的交流高压电路断路器的标准试验规程.技术勘误1 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1
ANSI/IEEE C37.09a-2005 基于对称电流的交流(AC)高压断路器标准试验程序.修改件1:电容电流开关 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
ANSI/IEEE C37.10-1996 电力断路器的诊断和故障调查指南 Guide for Diagnostic and Failure Investigation of Power Circuit Breakers
ANSI/IEEE C37.13.1-2006 金属封装低电压功率电力断路器专用开关设备标准 Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
ANSI/IEEE C37.18-1991 旋转电机用标准封闭磁场放电断路器 Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery
ANSI/IEEE C37.40-2003 高压熔断器、配电封装单刀空气开关、熔断开关和附件的工作条件和定义 High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories, Service Conditions and Definitions for
ANSI/IEEE C37.41-2000 高压熔断器、封闭式单极空气配电开关、熔断开关和附件的设计 Design for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
ANSI/IEEE C37.48-2004 高压熔断器、配电封口单极空气开关、熔丝切断开关及附件的应用、操作和维护指南 Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
ANSI/IEEE C37.63-2005 交流系统用架空、底座安装型、干拱顶和水中线路自动分段器的要求 Line Sectionalizers for Alternating-Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault and Submersible Automatic
ANSI/IEEE C37.66-2005 交流电系统(1 to 38 kV)用电容器开关的标准要求 Standard Requirements for Capacitor Switches for Alternating-Current Systems (1 to 38 kV)
ANSI/IEEE C37.71-2001 三相交流电系统亚层负载断开开关手工操作要求 Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for
ANSI/IEEE C37.72-1999 电流系统用的配有装载/中断开关和可分连接器的手工操作正面不带电面板上安装的开关设备标准 Standard for Manually-Operated Dead-Front Padmounted Switchgear with Load/Interrupting Switches and Separable Connectors for Alternating-Current Systems
ANSI/UL 1008-2007 转换开关设备的安全标准(照明和电力用闲置的自动、手动和旁路/隔离转换开关) Standard for Safety for Transfer Switch Equipment (Automatic, manual, and by-pass/isolation transfer switches for use in ordinary locations to provide for lighting and power)
ANSI/UL 1054-2003 特殊用途开关 Special-Use Switches
ANSI/UL 1429-2005 拉拔开关标准 Standard for Pullout Switches
ANSI/UL 20-2004 通用速动开关 General-Use Snap Switches
ANSI/UL 489-2006 模压外壳断路器、模压外壳开关和断路器外壳的安全标准（推荐日期2006-3-10） Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures (Proposals dated March 10, 2006)
ANSI/UL 61058-1-2005 器具开关的安全标准 Standard for Safety for Switches for Appliances
ANSI/UL 98-2006 封闭式和正面不带电部分的开关的标准 Standard for Enclosed and Dead-Front Switches
ANSI/SAE J560-1998 卡车挂车跨接电缆用7芯电缆连接器 Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables
ANSI/SAE J561-1993 电气接线端-小孔和薄片型 Electrical Terminals - Eyelet and Spade Type
ANSI/SCTE SP400-1996 "F"口(户外内孔)物理尺寸 "F" Port (Female Outdoor) Physical Dimensions
ANSI/NEMA FB-11-2000 危险位置用插针和套管式的插头、插座和连接器 Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations
ANSI/EIA 364-107-2000 电连接器，插孔，电缆组件或互连装置的目测图和跳动试验程序 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-30A-2002 电连接器和插孔的电容量试验程序 Capacitance Test Procedure for Electrical Connectors and Sockets
ANSI C119.4-2004 电连接器.铝-铝或铝-铜裸架空导线间使用的连接器 Electric Connectors - Connectors for Use between Aluminum-to-Aluminum or Aluminum-to-Copper Bare Overhead Connectors
ANSI/IEEE 386-2006 大于600V配电系统的可分离绝缘连接器系统 Separable Insulated Connector Systems for Power Distribution Systems above 600 V
ANSI/NEMA C119.1-2006 额定功率600V 的密封绝缘地下连接器系统 Sealed Insulated Underground Connector System Rated 600 Volts
ANSI/UL 1682-2007 针型和套管型插头、插孔和电缆连接器的安全标准 Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
ANSI/UL 1686-2007 引线和套管配置的安全标准(推荐日期 2006-10-20) Standard for Safety for Pin and Sleeve Configurations (Proposal dated October 20, 2006)
ANSI/UL 2255-2006 插塞的安全标准 Standard for Safety for Receptacle Closures
ANSI/UL 310-2005 快速连接电气终端 Electrical Quick-Connect Terminals
ANSI/UL 498-2007 连接插头和插座安全性的标准 Standard for Safety for Attachment Plugs and Receptacles (Proposal dated April 6, 2007)
ANSI/UL 498A-2008 电流分接头和适配器的安全标准 Standard for Safety for Current Taps and Adapters
ANSI/SAE J1067-1998 七芯导线电缆 Seven-Conductor Cable
ANSI/EIA-364-107-2000 电连接器、插座、电缆组件或互连系统的眼孔图样和不稳定性试验程序 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-30A-2002 电连接器和插座的电容试验程序 Capacitance Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-80-2002 电连接器和插座的低频屏蔽效果试验程序 Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockers
ANSI C119.6-2006 铝和铜导线用额定电压小于等于600V的非密封多端连接装置 Standard for Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors
ANSI CC1-2005 变电站的电力连接 Electric Power Connection for Substations
ANSI/ASTM B868-1996 电气连接系统触点性能分类惯例 Practice For Contact Performance Classification of Electrical Connection Systems
ANSI/ASTM F1835-1997 电缆连接设备导则 Guide for Cable Splicing Installations
ANSI/EIA 364-01B-2000 电连接器和插孔的加速试验程序 Acceleration Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-02C-1999 电气连接器.空气渗漏试验 Electric Connectors - Air Leakage Test
ANSI/EIA 364-03B-1999 电连接器.高处浸没试验程序 Electric Connectors - Altitude Immersion Test Procedure
ANSI/EIA 364-04A-2001 TP-40，电连接器正交力试验程序 TP-04, Normal Force Test Procedure for Electrical Connectors
ANSI/EIA 364-05B-1998 电连接器.触点插入力、断开力和拨出力试验程序 Electric Connectors - Contact Insertion, Release, and Removal Force Test Procedure
ANSI/EIA 364-06B-2000 电连接器.接触电阻试验程序 Electric Connectors - Contact Resistance Test Procedure
ANSI/EIA 364-07B-1998 电连接件.压合接头变形试验程序 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/EIA 364-08B-1998 电连接器.卷缩抗拉强度试验程序 Electric Connectors - Crimp Tensile Strength Test Procedure
ANSI/EIA 364-09C-1999 电连接器的耐久性试验程序 Durability Test Procedure for Electrical Connectors
ANSI/EIA 364-100-1999 电连接器的标志永久性试验程序 Marking Permanence Test Procedure for Electrical Connectors
ANSI/EIA 364-101-2000 电连接器、插孔和电缆组件或内连接系统的衰减试验程序 Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
ANSI/EIA 364-102-1998 电连接器、插孔、电缆组件或互连装置的上升时间衰减试验程序 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-105-1999 电连接器的高海拨低温试验程序 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/EIA 364-106-2000 电连接器及插孔的驻波比试验程序 Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-108-2000 电连接器、电缆组件或内连系统在适当的时候和Frequency Domain 测量的阻抗、反射系数、回波损失和电压柱波比（ VSWR ）试验程序 Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-10A-2000 电连接器的液体浸入试验程序 Fluid Immersion Test Procedure for Electrical Connectors
ANSI/EIA 364-11A-1997 电连接件.耐溶剂性能.电连接件试验程序 Electric Connectors - Resistance to Solvents - Test Procedure for Electrical Connectors
ANSI/EIA 364-13B-1998 电连接器.啮合和非啮合力的试验程序 Electric Connectors - Mating and Unmating Forces Test Procedure
ANSI/EIA 364-14B-1999 电连接器.臭氧暴露试验程序 Electric Connectors - Ozone Exposure Test Procedure
ANSI/EIA 364-16A-2002 电连接器剥离力（无焊压合连接）试验方法 Stripping Force (Solderless Wrapped Connection) Test Procedure for Electrical Connectors
ANSI/EIA 364-17B-1999 电连接器.有或无电气负载的温度寿命试验程序 Electric Connectors - Temperature Life With or Without Electrical Load Test Procedure for Electrical Connectors
ANSI/EIA 364-19A-2001 电连接器扭转插入保持力测试程序 Torsional Insert Retention Test Procedure for Electrical Connectors
ANSI/EIA 364-20B-1999 电连接器.耐压试验程序 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/EIA 364-21C-2000 电连接器.绝缘电阻测试 Electric Connectors - Insulation Resistance Test
ANSI/EIA 364-22B-2000 电连接器和插孔的寿命试验程序 Life Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-23B-2000 电连接器和插孔的低电平接触电阻试验程序 Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-24B-1998 电连接器.维护老化试验程序 Electric Connectors - Maintenance Aging Test Procedure
ANSI/EIA 364-25C-1998 电连接器.探针损伤试验程序 Electric Connectors - Probe Damage Test Procedure
ANSI/EIA 364-26B-1999 电连接器.盐雾腐蚀测试程序 Electric Connectors - Salt Spray Corrosion Test Procedure
ANSI/EIA 364-27B-1996 电连接器.机械冲击(规定的脉冲)测试程序 Electric Connectors - Mechanical Shock (Specified Pulse) Test Procedure
ANSI/EIA 364-28C-1997 电气连接件.振动试验程序 Electric Connectors - Vibration Test Procedure
ANSI/EIA 364-29B-1998 电连接器.触点保持力试验程序 Electric Connectors - Contact Retention Test Procedure
ANSI/EIA 364-31B-2000 电连接器.湿度试验程序 Electric Connectors - Humidity Test Procedure
ANSI/EIA 364-32C-2000 电连接器.热冲击测试程序 Electric Connector - Thermal Shock Test Procedure
ANSI/EIA 364-33A-2002 电连接器的TP-33电感试验 TP-33 Inductance Testing for Electrical Connectors
ANSI/EIA 364-35A-1983 电连接器.插入保持力测试程序 Electric Connectors - Insert Retention Test Procedure
ANSI/EIA 364-37B-1998 电连接器.触点插拨力的试验程序 Electric Connectors - Contact Engagement and Separation Force Test Procedure
ANSI/EIA 364-38B-1999 电连接器.电缆拔出试验 Electric Connectors - Cable Pull-Out Test
ANSI/EIA 364-39B-1999 电连接器.静水压试验程序 Electric Connectors - Hydrostatic Test Procedure
ANSI/EIA 364-40B-1998 电连接器.抗压碎试验程序 Electric Connectors - Crush Test Procedure
ANSI/EIA 364-41A-1984 电连接器.圆形护套电缆弯曲试验程序 Electric Connectors - Circular Jacket Cable Flexing Test Procedure
ANSI/EIA 364-41C-1999 电连接器的TP-41型电缆挠曲试验程序 TP-41 Cable Flexing Test Procedure for Electrical Connectors
ANSI/EIA 364-42A-1985 电连接器.耐冲击试验程序 Electric Connectors - Impact Test Procedure
ANSI/EIA 364-43B-2000 电连接器的电缆夹紧(弯矩)试验程序 Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
ANSI/EIA 364-44-1998 电连接器.电晕试验 Electric Connectors - Corona Testing
ANSI/EIA 364-45A-2000 防火壁电连接器的TP45火焰试验程序（EIA IS 50A的推荐升级） Proposed Upgrade of EIA IS 50A, TP45 Flame Test Procedure for Firewall Electrical Connectors
ANSI/EIA 364-46A-1998 电连接器的微秒间断试验程序 Microsecond Discontinuity Test Procedure for Electrical Connectors
ANSI/EIA 364-47A-2001 电连接器的无焊缠绕连接的试验程序 Conductor Unwrap (Solderless Wrapped Connection) Test Procedure for Electrical Connectors
ANSI/EIA 364-50A-1998 电气连接件.砂尘试验过程 Electric Connectors - Sand and Dust Test Procedure
ANSI/EIA 364-52-1993 电连接器/插孔的接线端子可焊性的TP 52测试程序 TP 52 Test Procedures for Solderability of Contact Terminations Use in Connectors/Sockets
ANSI/EIA 364-54A-1999 电连接器和电触点.磁导率试验 Electrical Connectors and Electrical Contacts - Magnetic Permeability Test
ANSI/EIA 364-56A-1991 耐焊接热.电连接器的测试程序 Resistance to Soldering Heat-Test Procedure for Electrical Connectors
ANSI/EIA 364-66A-2000 电连接器电磁干扰屏蔽效率试验程序 EMI Shielding Effectiveness Test Procedure for Electrical Connectors
ANSI/EIA 364-68A-2001 电连接器传动机构试验程序 Actuating Mechanism Test Procedure for Electrical Connectors
ANSI/EIA 364-69A-2002 电连接器电触点微值电感测量 Low-Level Inductance Measurement for Electrical Contacts of Electrical Connectors
ANSI/EIA 364-70A-1998 电流对电连接器温度升高影响的试验程序 Test Procedure for Current vs Temperature Rise of Electrical Connectors
ANSI/EIA 364-71-1992 电连接器用焊接芯试验程序 Solder Wicking Test Procedures for Electrical Connectors
ANSI/EIA 364-75-1997 电连接件的雷击试验程序 Lightning Strike Test Procedure for Electrical Connectors
ANSI/EIA 364-79-1998 电气连接件的插入连接强度试验程序 Insert Bond Strength Test Procedure for Electrical Connectors
ANSI/EIA 364-81-1994 连接器外壳、连接器组件和插孔的燃烧特性 Combustion Characteristics of Connector Housings, Connector Assemblies and Sockets
ANSI/EIA 364-82-1993 连接器/插孔塑料外壳的腐蚀性 Corrosivity of Plastics (Connector-Socket Housing)
ANSI/EIA 364-83-1999 电连接器外壳与外壳和外壳与隔壁电阻的试验程序 Shell-to-Shell and Shell-to-Bulkhead Resistance Test Procedure for Electrical Connectors
ANSI/EIA 364-85-1996 TP-85,电子连接器接触末端机械磨损试验和磨损评价的常规测试程序 TP-85, General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors
ANSI/EIA 364-86-1996 TP-86.电子连接器和插孔的偏振/编码键过应力的测试程序 TP-86, Polarizing/Coding Key Overstress Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-87-1996 电气连接件,接触件和插座的毫微秒事件检测 Nanosecond Event Detection for Electrical Connectors, Contacts and Sockets
ANSI/EIA 364-88-1995 电子连接器的残余磁力 Residual Magnetism for Electrical Connectors
ANSI/EIA 364-90-2000 电连接器的串音防卫度试验程序 Crosstalk Ratiuo Text Procedure for Electrical Connectors
ANSI/EIA 364-91-1996 电子连接器和插孔的灰尘试验 Dust Test for Electrical Connectors and Sockets
ANSI/EIA 364-92-1997 电连接件的绝缘替代接头（IDC）的引线挠曲度试验程序 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/EIA 364-93-1997 电连接件的绝缘替代接头（IDC）的返复线连接和断开试验程序 Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/EIA 364-94-1997 电连接件的绝缘替代接头（IDC）的TP-94横向拨出力试验程序 TP-94, Transverse Extraction Force Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/EIA 364-95-1999 电连接器的全连接和连接稳定性试验程序 Full Mating and Mating Stability Test Procedure for Electrical Connectors
ANSI/EIA 364-97-1997 电连接件的TP-97外壳面板保持力试验过程 TP-97, Housing Panel Retention Test Procedure for Electrical Connectors
ANSI/EIA 364-98-1997 电连接件的外壳锁紧机构强度试验程序 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors
ANSI/EIA 364-99-1999 电连接器的测试仪布置和保持力试验程序 Gage Location and Retention Test Procedure for Electrical Connectors
ANSI/EIA 364-D-2001 电连接件试验程序 Electric Connector Test Procedure
ANSI/EIA 429-1976 扁平电缆连接器的一般标准 Connectors, Electrical Flat Cable Type, General Specification for
ANSI/EIA 475C000-1989 FSMA型连接器分规范 Sectional Specification for Type FSMA Connectors
ANSI/EIA 622-1995 电子接头相关术语汇编 Glossary of Electrical Connector Related Terms
ANSI/EIA 677-1997 小型电源接头销尺寸规范 Specification for Small Form Factor Power Connector Pin Dimensions
ANSI/EIA 7000000-A-1996 经质量认证的电子和电气连接器(3MHz频率以下)总规范 Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially below 3 MHz)
ANSI/EIA 700A000-1997 已认证质量的印制电路板连接件的分规范 Sectional Specification for Printed Board Connectors of Certified Quality (for use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates)
ANSI/EIA 700BA00-1998 已质量认证的矩形/梯形连接件空白详细规范 Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality
ANSI/EIA 700C000-1996 评定了质量的环形多触点连接件的分规范 Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3MHz)
ANSI/EIA/CEA 364-28E-2006 电连接器和插座的振动试验程序 Vibration Test Procedure for Electrical Connectors and Sockets
ANSI/EIA/CEA 364-32D-2006 电连接器的热冲击(温度周期)试验方法 Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors
ANSI/EIA/ECA 364-15A-2006 电器连接件的接触牢度试验方法 Contact Strength Test Procedure for Electrical Connectors
ANSI/EIA/ECA 364-18B-2007 电连接和插座用视觉和空间检验试验规程 Visual and Dimensional Inspection Test Procedure for Electrical Connectors and Sockets
ANSI/EIA/TIA 455-172-1986 火墙连接器的抗燃性 Flame Resistance of Firewall Connector
ANSI/EIA-364-01B-2000 电连接器和插座用加速度试验程序 Acceleration Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-02C-1999 电连接器.空气泄漏试验 Air Leakage Test Procedure for Electrical Connectors
ANSI/EIA-364-03B-1999 电连接器.高度浸没试验程序 Altitude Immersion Test Procedure for Electrical Connectors
ANSI/EIA-364-04A-2001 电连接器TP-04A标称力试验程序 TP-04, Normal Force Test Procedure for Electrical Connectors
ANSI/EIA-364-05B-1998 电连接器.接触插入、释放和移动力的试验程序 Electric Connectors - Contact Insertion, Release, and Removal Force Test Procedure
ANSI/EIA-364-06C-2006 电器连接器接触牢度的试验方法 Contact Resistance Test Procedure for Electrical Connectors
ANSI/EIA-364-07C-2007 电连接器.压接触点变形试验程序 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/EIA-364-08B-1998 电连接器.卷曲抗拉强度试验程序 Electric Connectors - Crimp Tensile Strength Test Procedure
ANSI/EIA-364-09C-1999 电连接器的耐久性的试验程序 Durability Test Procedure for Electrical Connectors
ANSI/EIA-364-1000.01A-2006 评定商务办公设备用电器连接件和插座性能的环境试验方法 Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Business Office Applications
ANSI/EIA-364-100-1999 电连接器标记耐久性试验程序 Marking Permanence Test Procedure for Electrical Connectors
ANSI/EIA-364-101-2000 电连接器、插座、电缆附件或互连系统衰减试验程序 Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
ANSI/EIA-364-102-1998 电连接器、插座、电缆附件或互连系统上升时间降低试验程序 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-105-A-2008 高连接装置.电气连接器用低温试验程序 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/EIA-364-106-2000 电连接器和插座的驻波比(SWR)试验程序 Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-108-2000 电连接器、电缆附件或互连系统在时间和频率域中测量的阻抗、反射系数、回程损耗和VSWR试验程序 Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-10E-2008 电连接器用液体浸入试验程序 Fluid Immersion Test Procedure for Electrical Connectors
ANSI/EIA-364-11B-2005 电连接器和插座的耐溶剂性试验程序 Resistance to Solvents Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-13D-2007 电连接器和插座间插拔力的试验程序 Mating and Unmating Force Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-14B-1999 电连接器.臭氧暴露试验程序 Ozone Exposure Test Procedure for Electrical Connectors
ANSI/EIA-364-16A-2002 电连接器的脱出力(非焊绕接)的试验程序 Stripping Force (Solderless Wrapped Connection) Test Procedure for Electrical Connectors
ANSI/EIA-364-17B-1999 电连接器.电连接器有电负载或无电负载时温度寿命的试验程序 Electric Connectors - Temperature Life With or Without Electrical Load Test Procedure for Electrical Connectors
ANSI/EIA-364-19A-2001 电连接器的扭转插入保持力的试验程序 Torsional Insert Retention Test Procedure for Electrical Connectors
ANSI/EIA-364-20D-2008 电连接器.耐电压试验程序 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/EIA-364-21D-2008 电气连接器、插座和同轴触点用耐绝缘试验程序 Insulation Resistance Test Procedure for Electrical Connectors, sockets and Coaxial Contacts
ANSI/EIA-364-22B-2000 电连接器的模拟寿命试验程序 Simulated Life Test Procedure for Electrical Connectors
ANSI/EIA-364-23C-2006 电连接器和插座的低层接触电阻试验程序 Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-24B-1998 电连接器.维修老化试验程序 Electric Connectors - Maintenance Aging Test Procedure
ANSI/EIA-364-25C-1998 电连接器.探针损坏试验程序 Electric Connectors - Probe Damage Test Procedure
ANSI/EIA-364-26B-1999 电连接器.盐雾腐蚀试验程序 Electric Connectors - Salt Spray Corrosion Test Procedure
ANSI/EIA-364-29C-2006 电连接器.接触保持力试验程序 Electric Connectors - Contact Retention Test Procedure
ANSI/EIA-364-31B-2000 电连接器.湿度试验程序 Electric Connectors - Humidity Test Procedure
ANSI/EIA-364-33A-2002 电连接器TP-33电感试验 TP-33 Inductance Testing for Electrical Connectors
ANSI/EIA-364-35B-1998 电连接器.插入保持试验程序 Insert Retention Test Procedure for Electrical Connectors
ANSI/EIA-364-36B-2006 电连接器用不透气特性试验程序的测定 Determination of Gas-Tight Characteristics Test Procedure for Electrical Connectors
ANSI/EIA-364-37B-1998 电连接器.插接和脱开力的试验程序 Electric Connectors - Contact Engagement and Separation Force Test Procedure
ANSI/EIA-364-38B-1999 电连接器.电缆拔出试验 Cable Pull-Out Test Procedure for Electrical Connectors
ANSI/EIA-364-39B-1999 电连接器.流体静力学试验程序 Electric Connectors - Hydrostatic Test Procedure
ANSI/EIA-364-40B-1998 电连接器.压垮试验程序 Electric Connectors - Crush Test Procedure
ANSI/EIA-364-41C-1999 电连接器TP-41电缆挠曲试验程序 TP-41 Cable Flexing Test Procedure for Electrical Connectors
ANSI/EIA-364-42B-1998 电连接器.冲击试验程序 Impact Test Procedure for Electrical Connectors
ANSI/EIA-364-43B-2000 电连接器.电缆夹紧(弯曲瞬间)试验程序 Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
ANSI/EIA-364-44-1998 电连接器.电晕试验 Electric Connectors - Corona Testing
ANSI/EIA-364-45A-2000 电连接器的防火墙燃烧试验程序 Firewall Flame Test Procedure for Electrical Connectors
ANSI/EIA-364-46B-2006 电连接器的微秒不连续性试验程序 Microsecond Discontinuity Test Procedure for Electrical Connectors
ANSI/EIA-364-47A-2001 电连接器的导体非缠绕(非焊接缠绕连接)试验程序 Conductor Unwrap (Solderless Wrapped Connection) Test Procedure for Electrical Connectors
ANSI/EIA-364-50A-1998 电连接器的沙尘试验程序 Dust (Fine Sand)Test Procedure for Electrical Connectors
ANSI/EIA-364-51A-2002 电连接器.抗冰试验程序 Electrical Connectors - Ice Resistance Test Procedure
ANSI/EIA-364-52A-2003 连接器/插座中使用的触点终端的软钎焊性的TP52试验程序 TP 52 Test Procedures for Solderability of Contact Terminations Use in Connectors/Sockets
ANSI/EIA-364-53B-2000 电连接器.TP53硝酸蒸汽试验.镀金层 Electric Connectors - TP53, Nitric Acid Vapor Test, Gold Finish
ANSI/EIA-364-54A-1999 电连接器和电触点.导磁性试验 Magnetic Permeability Test Procedure for Electrical Connectors, Contacts and Sockets
ANSI/EIA-364-56D-2008 电连接器和插座用耐软钎焊热的试验程序 Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-58A-2003 电连接器.有可拆卸触点的连接器的机械荷载温度寿命(在一定温度下静态机械荷载) Electric Connectors - Temperature Life With Mechanical Loading for Connectors with Removable Contacts (Static Mechanical Load at Temperature)
ANSI/EIA-364-60A-2008 电连接器和插座用触点抛光材料孔隙率测试的一般方法 General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets
ANSI/EIA-364-62A-2004 电子连接器和插座的终端强度试验规程TP-62A TP-62A, Terminal Strength Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-66A-2000 电连接器的EMI屏蔽效果试验程序 EMI Shielding Effectiveness Test Procedure for Electrical Connectors
ANSI/EIA-364-68A-2001 电连接器操作机构试验程序 Actuating Mechanism Test Procedure for Electrical Connectors
ANSI/EIA-364-69A-2002 电连接器的电触点的低电平电感测量 Low-Level Inductance Measurement for Electrical Contacts of Electrical Connectors
ANSI/EIA-364-70B-2007 电连接器和插座的与电流相对应的温升试验程序 Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-71B-2000 电连接器焊料吸液作用试验程序 Solder Wicking Test Procedures for Electrical Connectors
ANSI/EIA-364-75-1997 电连接器的雷击试验程序 Lightning Strike Test Procedure for Electrical Connectors
ANSI/EIA-364-79-1998 电连接器插入粘结强度试验程序 Insert Bond Strength Test Procedure for Electrical Connectors
ANSI/EIA-364-81A-2005 电连接器套、连接器组件和插座的燃烧特性试验程序 Combustion Characteristics Test Procedure for Electrical Connector Housing, Connector Assemblies and Sockets
ANSI/EIA-364-82A-2005 电连接器套、连接器组件和插座的塑料腐蚀性试验程序 Corrosivity of Plastics Test Procedure for Electrical Connector Housing, Connector and Socket Housings
ANSI/EIA-364-83-1999 电连接器的外壳间以及外壳与隔板间阻力试验程序 Shell-to-Shell and Shell-to-Bulkhead Resistance Test Procedure for Electrical Connectors
ANSI/EIA-364-86-2008 电连接器和插座的偏振/代码钥匙超应力试验程序 Polarizing/Coding Key Overstress Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-90-2000 电连接器、插座、电缆组件或互联系统用串扰比试验程序 Crosstalk Ratio Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnect Systems
ANSI/EIA-364-91A-2005 电连接器和插座的粉尘试验 Dust Test for Electrical Connectors and Sockets
ANSI/EIA-364-92-1997 电连接器绝缘位移触点(IDC)的电线弯曲试验程序 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/EIA-364-95-1999 电连接器整体配接和配接稳定性试验程序 Full Mating and Mating Stability Test Procedure for Electrical Connectors
ANSI/EIA-364-96-2002 电连接器电镀通孔完整性的试验程序TP-96 TP-96, Plated Through Hole Integrity Test Procedure for Electrical Connectors
ANSI/EIA-364-99-1999 电连接器量规位置和保持力试验程序 Gage Location and Retention Test Procedure for Electrical Connectors
ANSI/EIA-364-E-2008 电气连接器/插座试验程序包括环境分类 Electrical Connector/Socket Test Procedures Including Environmental Classifications
ANSI/EIA-622-A-2007 电连接器相关术语词汇 Glossary of Electrical Connector Related Terms
ANSI/EIA-677-1997 小形态因数电源连接器插针尺寸的规范 Specification for Small Form Factor Power Connector Pin Dimensions
ANSI/EIA-700A000-1997 经质量认证的印制电路板连接器的分规范（用于直流/低频模拟应用系统和采用高数字速率的数字应用系统） Sectional Specification for Printed Board Connectors of Certified Quality (for use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates)
ANSI/EIA-700BA00-1998 经质量认证的矩形/梯形连接器的空白详细规范 Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality
ANSI/ICEA S-76-474-2005 中性线支撑的额定值600伏特的抗风化挤制绝缘电力电缆组件 Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts
ANSI/ICEA S-81-570-2005 加固设计的600伏特电缆标准 Standard for 600 Volt Cables of Ruggedized Design
ANSI/IEEE 1300-1997 气体绝缘主配电装置的电缆连接指南 Guide for Cable Connections for Gas Insulated Substations
ANSI/IEEE 404-2006 额定电压为2500-500000V的挤压介质电缆接头和层压介质电缆接头 Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V - 500 000 V
ANSI/NEMA WD6-2002 布线设备.尺寸要求 Wiring Devices - Dimensional Requirements
ANSI/TIA/EIA 455-172-1986 防火墙连接器的抗火焰性 Flame Resistance of Firewall Connector
ANSI/TIA-455-172-1986 防火墙连接器的阻燃性 Flame Resistance of Firewall Connector
ANSI/UL 1059-2006 接线板安全性标准 Standard for Safety for Terminal Blocks
ANSI/UL 1565-2004 电线定位装置 Wire Positioning Devices
ANSI/UL 1659-2005 软线组和电源软线用固定插头开关的安全标准 Standard for Safety for Attachment Plug Blades for Use in Cord Sets and Power Supply Cords
ANSI/UL 486A-486B-2006 电线连接器标准 Standard for Wire Connectors (Proposals dated 3/17/06)
ANSI/UL 486C-2006 分线连接器标准 Standard for Splicing Wire Connectors (Proposals dated 3/17/06)
ANSI/UL 486D-2005 密封导线连接器的安全标准 Standard for Safety for Sealed Wire Connectors
ANSI/UL 486E-2000 铝和/或铜导线使用的设备配线终端 Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
ANSI/UL 514A-2007 金属出线盒安全标准 Standard for Safety for Metallic Outlet Boxes
ANSI/UL 514B-2007 导管、管道和电缆配件用安全标准 Standard for Safety for Conduit, Tubing, and Cable Fittings
ANSI/UL 514C-2006 非金属出线盒、嵌入式器件盒和外壳 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
ANSI/UL 514D-2007 嵌入安装布线装置用盖板的安全性标准 Standard for Safety for Cover Plates for Flush-Mounted Wiring Devices
ANSI/UL 209-2007 网状金属地面电缆管和管件标准 Standard for Cellular Metal Floor Raceways and Fittings (Proposal dated 2-2-07)
ANSI/ASTM D6070-2002 预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法 Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ANSI C80.1-2005 镀锌刚性钢导管(GCR) Rigid Steel Conduit - Zinc Coated (GCR)
ANSI C80.3-2005 钢制电气金属管(EMT) Steel Electrical Metallic Tubing (EMT)
ANSI C80.5-2005 电气钢性铝导管(ERAC) Electrical Rigid Aluminum Conduit (ERAC)
ANSI C80.6-2005 中间金属电导管(EIMC) Electrical Intermediate Metal Conduit (EIMC)
ANSI/ASTM D348-2006 电气绝缘用刚性管的试验方法 Test Methods for Rigid Tubes Used for Electrical Insulation
ANSI/ASTM F2160-2008 规格为固壁高密度聚乙烯高密度聚乙烯管道的基础上控制外径的OD Specification for Solid Wall High Density Polyethylene Hdpe Conduit Based on Controlled Outside Diameter Od
ANSI/ASTM F2176-2002 聚乙烯管道及内管道用机械连接件规范 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
ANSI/NECA 102-2004 安装铝导管 Installing Aluminum Conduits
ANSI/NEMA FB-1-2007 导线管和电缆组件用配件、铸造金属箱和导线管体 Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies
ANSI/NEMA VE1-2003 金属电缆托架系统 Metal Cable Tray Systems
ANSI/NEMA VE2-2000 金属电缆板安装导则 Metal Cable Tray Installation Guidelines
ANSI/UL 1-2007 柔性金属导管 Flexible Metal Conduit (proposal dated 6-8-07)
ANSI/UL 1242-2007 电气金属中间导管.钢 Electrical Metal Intermediate Conduit - Steel (proposal dated 6-8-07)
ANSI/UL 1441-2005 涂覆电套管标准 Standard for Coated Electrical Sleeving
ANSI/UL 1660-2004 不透液体的非金属软管的安全标准 Standard for Safety for Liquid-Tight Flexible Nonmetallic Conduit
ANSI/UL 1684A-2007 超重壁加固热树脂管道(RTRC)和配件的补充要求 Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
ANSI/UL 1696-2005 非金属机械防护管(NMPT)的安全标准 Standard for Safety for the Standard for Nonmetallic Mechanical Protection Tubing (NMPT)
ANSI/UL 1990-2007 带导线的非金属地下导管的安全标准 Standard for Safety for Nonmetallic Underground Conduit with Conductors
ANSI/UL 2239-2004 导线管、管道和电缆支持用五金件标准 Standard for Hardware for the Support of Conduit, Tubing and Cable
ANSI/UL 360-2007 耐液体渗透的钢制柔性导线管 Liquid-Tight Flexible Steel Conduit (Proposal dated 6-8-07)
ANSI/UL 5-2007 地面金属电缆槽和配件标准 Standard for Surface Metal Raceways and Fittings
ANSI/UL 568-2004 非金属电缆盘系统的安全标准 Standard for Safety for Nonmetallic Cable Tray Systems
ANSI/UL 5A-2003 非金属表面电缆管道和配件的安全标准 Standard for Safety for Non-Metallic Surface Raceways and Fittings
ANSI/UL 5B-2007 支柱型槽形导线管和配件标准 Standard for Strut-Type Channel Raceways and Fittings
ANSI/UL 5C-2007 与数据、信号和控制电路一起使用的表面电缆管道和配件的标准 Standard for Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits (Proposal dated 2-2-07)
ANSI/UL 6-2007 电气刚性金属管.钢(提议日期7-13-07) Electrical Rigid Metal Conduit - Steel (Proposal dated 7-13-07)
ANSI/UL 651-2007 40和80系列的刚性聚氯乙烯(PVC)导管和管件一览表 Schedule 40 and 80 Rigid PVC Conduit and Fittings
ANSI/UL 651A-2007 EB型和A型刚性聚氯乙烯(PVC)导管和高密度聚乙烯(HDPE)导管 Type EB and A Rigid PVC Conduit and HDPE Conduit
ANSI/UL 651B-2007 连续长度高密度聚乙烯(HDPE)导管 Continuous Length HDPE Conduit
ANSI/UL 6A-2003 电器用刚性金属导管.铝、青铜及不锈钢 Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel
ANSI/UL 797-2007 电气金属管件.钢(提议日期7-13-07) Electrical Metallic Tubing - Steel (Proposal dated 7-13-07)
ANSI/UL 797A-2007 电气金属管件.铝 Electrical Metallic Tubing - Aluminum (Proposal dated 6-8-07)
ANSI/UL 870-2003 电线管道、辅助槽和相关配件 Wireways, Auxiliary Gutters, and Associated Fittings
ANSI/UL 884-2007 地板下导线管和配件的安全标准 Standard for Safety for Underfloor Raceways and Fittings
ANSI/UL 355-2006 电缆卷盘 Cord Reels
ANSI/EIA-364-103-1998 电连接器、插座、电缆附件或互连系统传播延迟试验程序 Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/IEEE C57.12.29-2005 底座安装设备标准.沿海环境的外壳完整性 Standard for Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
ANSI/IEC 60529-2004 外壳防护等级(IP代码) Degrees of protection provided by enclosures (IP Code)
ANSI/IEEE 1204-1997 端接在低短路容量交流系统的直流链路的设计指南.第1部分:交流/直流互相作用现象.第2部分:计划指南 Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities, Part I: AC/DC Interaction Phenomena, Part II: Planning Guide
ANSI/IEEE C57.12.28-2005 底座安装设备标准.外壳完整性 Standard for Pad-Mounted Equipment - Enclosure Integrity
ANSI/IEEE C57.13.3-2005 仪表用变压器次级线圈电路和外壳接地指南 Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
ANSI/UL 50-2007 接线柜和接线盒 Cabinets and Boxes
ANSI/UL 50E-2007 电气设备用外壳环境考虑的安全标准 Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations
ANSI/ASTM B603-2001 电加热元件的拉伸或辊轧铁铬铝合金规范 Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ANSI/ASTM B613-1976 滑动电触点复合材料微型电刷制备规范指南 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ANSI/ASTM A901-1997 半成品型非晶磁芯合金规范 Specification for Amorphous Magnetic Core Alloys Semi-Processed Types
ANSI/ASTM A1009-2000 高频(10KHz-1MHz)电源变压器和过滤电感器软磁化锰锌铁芯材料规范 Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10KHz to 1MHz) Power Transformer and Filter Inductor Applications
ANSI/ASTM A1013-2000 受控温度下软磁芯元件高频(10 kHz - 1 MHz)磁芯损失试验方法 Test Method for High Frequency (10 kHz - 1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures using the Voltmeter-Ammeter-Wattmeter Method
ANSI/ASTM A346-1974 迪特利(Dieterly)电桥法测定迭片铁芯样品的交流电磁性能的方法 Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method
ANSI/ASTM A697-1998 伏特计-安培计-瓦特计测定叠层铁芯样品交流电磁特性的方法 Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using the Voltmeter-Ammeter-Wattmeter Methods
ANSI/IEEE 393-1991 磁芯试验程序 Magnetic Cores, Test Procedures for
ANSI/NEMA MW1000 Revision 3-2007 磁线(修订版3) Magnet Wire (Revision 3)
ANSI/NEMA MW1000, Rev 1-1997 磁导线 Magnet Wire
ANSI/IEEE 1267-2005 指定承包变电站项目规范的指南 Guide for Development of Specification for Turnkey Substation Projects
ANSI/ASTM D1868-2007 绝缘系统评估中局部放电(电晕)脉冲的探测和测量用试验方法 Test Method for Detection and Measurement of Partial Discharge (corona) Pulses in Evaluation of Insulation Systems
ANSI/IEEE 1425-2001 浸渍纸绝缘传输电缆系统的剩余使用寿命的评估指南 Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems
ANSI/IEEE 259-1999 特殊产品绝缘系统评价用标准试验程序 Standard Test Procedure for Evaluation of Systems of Insulation for Specialty
ANSI/IEEE 275-1993 采用模绕预绝缘定子线圈的交流电机绝缘系统的热量评定推荐规程 Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Recommended Practice for
ANSI/IEEE 286-2000 电动机械定子线圈绝缘的损失角增量测量的推荐实施规程 Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
ANSI/IEEE 434-2006 交流电机额定电压≥2300V的绝缘系统功能评估用指南 Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
ANSI/IEEE 99-2007 建议的做法为编写的测试程序，为热的评价绝缘系统电气设备 Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment
ANSI/IEEE C57.12.56-1994 通风干燥型电力和配电变压器绝缘系统热评价的试验程序 Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers (reinstatement of administratively withdrawn standard)
ANSI/IEEE 436-1991 电子电路变压器产生电晕(局部放电)的测量指南 Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
ANSI/IEEE C57.19.00-2004 电力装置套管的标准一般要求和试验程序 Standard General Requirements and Test Procedure for Power Apparatus Bushings
ANSI/IEEE C57.19.01-2000 户外器具轴衬性能特征和尺寸 Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
ANSI/IEEE C57.19.03-1996 直流装置用套管的标准要求、术语和试验规程 Standard Requirements, Terminology and Test Code for Bushings for DC Applications
ANSI/IEEE C57.19.03-1996/Cor 1-2005 直流装置用套管的标准要求、术语和试验规程 Standard Requirements, Terminology, and Test Code for Bushings for DC Applications - Corrigendum 1
ANSI/IEEE C57.19.100-1995 电力设备套管应用指南 Guide for Application of Power Apparatus Bushings
ANSI C135.17-1988 架空线路架设用镀锌铁制螺栓型带导向螺纹的绝缘子柱销 Insulator Pins with Lead Threads for Overhead Line Construction, Galvanized Ferrous Bolt-Type
ANSI C29.10-1989 湿法制瓷绝缘子.室内装置型 Wet-Process Porcelain Insulators - Indoor Apparatus Type
ANSI C29.1-1988 电力绝缘子.试验方法 Electrical Power Insulators - Test Methods
ANSI C29.12-1997 绝缘子.合成物.悬浮型 Insulators - Composite - Suspension Type
ANSI C29.13-2000 绝缘子.组合分布固定型 Insulators - Composite Distribution Deaded Type
ANSI C29.17-2001 合成线柱型绝缘子 Insulators-Composite-Line Post Type
ANSI C29.18-2003 绝缘子复合材料.配线柱型 Insulators Composite - Distribution Line Post Type
ANSI C29.2-1992 湿法瓷绝缘子和钢化玻璃绝缘子(悬式) Insulators - Wet-process porcelain and toughened glass - Suspension type
ANSI C29.3-1986 湿法瓷绝缘子.圆柱型 Wet Process Porcelain Insulators - Spool Type
ANSI C29.4-1989 湿法瓷绝缘子.张紧型 Wet-Process Porcelain Insulators - Strain Type
ANSI C29.5-1984 湿法瓷绝缘子.低压和中压型 Wet-Process Porcelain Insulators - Low- and Medium-Voltage Types
ANSI C29.6-1996 湿法磁绝缘子.高压针型 Wet-Process Porcelain Insulators - High-Voltage Pin Type
ANSI C29.7-1996 湿法瓷绝缘子.高压线路柱式 Wet-Process - Porcelain Insulators - High-Voltage Line-Post Type
ANSI C29.8-1985 湿法瓷绝缘子.帽型和针型装置 Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type
ANSI C29.9-1983 湿法制瓷绝缘子.接线柱型装置 Wet-Process Porcelain Insulators - Apparatus, Post-Type
ANSI/IEEE 1523-2002 户外陶瓷绝缘子用室温硫化硅橡胶涂层的应用、维护和评价指南 Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
ANSI/IEEE 1572-2004 复合线路柱形绝缘子的应用指南 Guide for Application of Composite Line Post Insulators
ANSI/IEEE 957-2005 绝缘子清洗指南 Guide for Cleaning Insulators
ANSI/IEEE 987-2001 复合绝缘体的应用指南 Guide for Application of Composite Insulators
ANSI/IEEE 95-2002 带高正向电压的大型交流旋转机械的绝缘试验的推荐实施规范 Insulation Testing of Large AC Rotating Machinery with High Direct Voltage, Recommended Practice for
ANSI/IEEE 1313.1-1997 动力系统.绝缘配合 Power systems - Insulation Coordination
ANSI/IEEE 1313.2-1999 绝缘配合的应用指南 Guide for the Application of Insulation Coordination
ANSI/UL 840-2007 包括间隙和漏电距离的绝缘配合用安全标准 Standard for Safety for Insulation Coordination Including Clearances and Creepage

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点