畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/SAE J1494-1997 蓄电池升压器电缆 Battery Booster Cables
ANSI/IEEE 1235-2000 地下电力电缆和管道用可识别护套的特性指南 Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
ANSI/IPC WHMA-A-620-2002 电缆和导线护皮组件的要求和验收 Requirements and Acceptance for Cable and Wire Harness Asssemblies
ANSI/ICEA P-32-382-2006 绝缘电缆短路特征 Short Circuit Characteristics of Insulated Cables
ANSI/ICEA S-108-720-2004 额定电压46至345KV的挤压绝缘电力电缆的标准 Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV
ANSI/ICEA S-532-1973 控制电缆、热电偶软线和仪器仪表用电缆 Control, Thermocouple Extension and Instrumentation Cables
ANSI/ICEA S-70-547-2006 抗风化聚乙烯绝缘导线 Weather-Resistant Polyethylene Covered Conductors
ANSI/ICEA S-91-674-2006 共轴和共轴/绞线对合成埋地服务线 Coaxial and Coaxial/Twisted Pair Composite Buried Service Wires
ANSI/ICEA S-94-649-2005 额定值5000-46000伏特的同轴中性电缆 Concentric Neutral Cables Rated 5,000-46,000 Volts
ANSI/ICEA S-97-682-2007 多用途屏蔽的电力电缆额定电压5～46kV用标准 Standard For Utility Shielded Power Cables Rated 5 Through 46 kV
ANSI/ICEA T-24-380-2007 局部放电试验程序标准 Standard for Partial Discharge Test Procedure
ANSI/ICEA T-26-465-2007 试验用压模绝缘体电缆、控制电缆、测量仪器电缆和便携式电缆取样频率的指南 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/IEEE 1017-2004 潜水电泵电缆的现场试验推荐规范 Recommended Practice for Field Testing Electric Submersible Pump Cable
ANSI/IEEE 1018-2004 规定潜水电泵电缆用推荐规程.乙烯-丙烯橡胶绝缘 Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
ANSI/IEEE 1019-2004 规定潜水电泵电缆用推荐规程.聚丙烯绝缘 Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
ANSI/IEEE 1120-2004 海底电力和通信电缆的规划、设计和安装中所考虑因素的指南 Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable
ANSI/IEEE 1185-1994 发电站电缆的安装方法指南 Guide for Installation Methods for Generating Station Cables
ANSI/IEEE 1210-2004 使用电线和电缆测定电缆润滑剂可混用性的标准试验 Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable
ANSI/IEEE 1242-1999 石油和化学工厂的电源、控制和专用电缆的详细规定和选择指南 Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants
ANSI/IEEE 1243-1997 提高传输线路照明性能的设计指南 Design Guide for Improving the Lightning Performance of Transmission Lines
ANSI/IEEE 1407-2007 指南加速老化测试中，电压（五千瓦- 35千伏特）挤压电力电缆用充水坦克 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks
ANSI/IEEE 1617-2007 指南检测，减灾，控制和同心中性腐蚀的中压地下电缆 Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables
ANSI/IEEE 383-2003 核电站1E级电缆质量鉴定和现场拼接标准 Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
ANSI/IEEE 634-2004 电缆防火鉴定试验标准 Standard for Cable Penetration Fire Stop Qualification Test
ANSI/IEEE 635-2003 电力电缆铝护套的选择和设计指南 Guide for Selection and Design of Aluminum Sheaths for Power Cables
ANSI/IEEE 690-2004 核电站1E级电路用电缆系统的设计和安装 Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
ANSI/IEEE 82-2002 绝缘导体上脉冲电压试验的标准试验程序 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
ANSI/IEEE 835-1994 标准电力电缆的载流容量表 Standard Power Cable Ampacity Tables
ANSI/IEEE 848-1996 防火电缆载流量额定降低测量定的标准程序 Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables
ANSI/NECA 101-2006 安装钢导管的标准(刚性、IMC、EMT) Standard for Installing Steel Conduits (Rigid, IMC, EMT)
ANSI/NECA 120-2005 安装铠装电缆(AC型)和金属包覆电缆(MC型)标准 Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC)
ANSI/NECA 121-2007 非金属铠装电缆安装用标准 Standard for Installing Nonmetallic-Sheathed Cable
ANSI/NECA 600-2003 中压电缆安装推荐实施规程 Recommended Practice for Installing Medium Voltage Cable
ANSI/NECA/NEMA 105-2007 金属电缆盘系统的安装和维护用标准 Standard for Installing and Maintaining Metal Cable Tray Systems
ANSI/NEMA WC53-2000 试验用挤压介电功率、控制、仪器仪表和轻便电缆的标准试验方法 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA WC57-2004 控制电缆、热电偶钻延长电缆和仪器电缆 Control, Thermocouple Extension and Instrumentation Cables
ANSI/NEMA WC70-1999 额定配电电压 2000V或更低的无屏蔽电力电缆 Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
ANSI/NEMA WC71-1999 额定电压为2001-5000V 的无屏蔽配电电缆 Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy
ANSI/SCTE 102-2005 中继和配电连接器的电缆保持力测试 Cable Retention Force Testing of Trunk & Distribution Connectors
ANSI/SCTE TP407-1998 "F"连接器回波损耗的试验方法 Test Method for "F" Connector Return Loss
ANSI/UL 1063-2006 机床线缆用安全标准 Standard for Safety for Machine-Tool Wires and Cables
ANSI/UL 1072-2007 中压电力电缆的安全标准 Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)
ANSI/UL 1277-2005 任选光纤构件的电力电缆和控制盘电缆的安全标准(第4版) Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)
ANSI/UL 13-2007 有功率限制的电路电缆安全标准 Standard for Safety for Power-Limited Circuit Cables
ANSI/UL 1569-2006 铠装电缆 Metal-Clad Cables
ANSI/UL 1581-2006 安全标准.电线、电缆和软线的基准标准 Standard for Safety - Reference Standard for Electrical Wires, Cables, and Flexible Cords
ANSI/UL 183-2007 制造布线系统的安全标准 Standard for Safety for Manufactured Wiring Systems (Proposal dated 2-16-07)
ANSI/UL 2250-2006 仪器仪表装置用盘式电缆的安全标准 Standard for Safety for Instrumentation Tray Cable
ANSI/UL 4-2003 铠装电缆 Armored Cable
ANSI/UL 44-2005 橡胶绝缘电线和电缆 Rubber-Insulated Wires and Cables
ANSI/UL 493-2007 热塑绝缘埋设电源线和支路电缆安全性的标准 Standard for Safety for Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables
ANSI/UL 719-2007 非金属护套电缆安全标准 Standard for Safety for Nonmetallic-Sheathed Cables
ANSI/UL 758-2008 应用布线材料 Appliance Wiring Material (Proposal dated 11/9/07)
ANSI/UL 817-2007 电缆集和电源电缆用安全标准 Standard for Safety for Cord Sets and Power-Supply Cords (Proposal dated March 9, 2007)
ANSI/UL 83-2008 热塑性绝缘电线和电缆用安全标准 Standard for Safety for Thermoplastic-Insulated Wires and Cables
ANSI/UL 854-2007 引入电缆的安全标准 Standard for Safety for Service-Entrance Cables
ANSI/ASTM D1676-2003 膜绝缘磁导线的试验方法(10.01) Methods of Testing Film-Insulated Magnet Wire (10.01)
ANSI/ASTM D2307-2007 薄膜绝缘圆磁性导线的耐热性试验方法 Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ANSI/ASTM D3032-2004 连接线绝缘的试验方法 Hookup Wire Insulation, Test Method for (10.02)
ANSI/ASTM D3353-2004 纤维绝缘磁性金属线的试验方法 Test Methods for Fibrous-Insulated Magnet Wire
ANSI/ASTM D4881-2005 漆包纤维或薄膜缠绕磁线的耐热性标准试验方法 Test Method for Thermal Endurance of Varnished Fibrous or Film Wrapped Magnet Wire
ANSI/ICEA S-109-709-2004 配电框架线的技术要求 Distribution Frame-Wire, Technical Requirements
ANSI/IEEE C37.23-2003 金属包壳总线标准 Standard for Metal-Enclosed Bus
ANSI/NEMA HP3-2000 电子和电气用ET(250V)、E(600V)和EE(1000V)型PTFE(聚四氟乙烯)绝缘高温架空电线 Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt)
ANSI/NEMA HP4-2000 KT型(250V)、K型(600V)和KK型(1000V)电和电子FEP(氟乙烯丙烯)绝缘高温架空电线 Electrical and Electronic FEP (Fluorinated Ethylene Propylene)-Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt) and KK (1000 Volt)
ANSI/NEMA WC67-2005 电气和电子设备用非绝缘导体 Uninsulated Conductors Used in Electrical and Electronic Applications
ANSI/UL 2438-2006 户外季节性使用的电线连接的布线设备的安全标准 Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices
ANSI/EIA 600.31-1997 动力线物理层和介质规范 Power Line Physical Layer and Medium Specification
ANSI/NECA 111-2003 非金属管道的安装标准(RNC、ENT和LFNC) Standard for Installing Nonmetallic Raceways (RNC, ENT and LFNC)
ANSI/EIA 359-A-1-1988 专用颜色-颜色识别和编码的标准色(ANSI/EIA 359-A-1984的补充1) Special Colors - Standard Colors for Color Identification and Coding (addendum No. 1 to ANSI/EIA 359-A-1984)
ANSI/ASTM F1883-2003 用美国线规(AWG)或米制单位选择电线和电缆规格的实施规程 Practice for Selection of Wire and Cable Size, in AWG or Metric Units
ANSI/CEA 2015-2007 移动电子布线标准 Mobile Electronics Cabling Standard
ANSI/ICEA P-54-440-2002 安装在电缆管道中的电缆的载流量 Ampacities of Cables Installed in Cable Trays
ANSI/ICEA T-31-610-2007 绕制导线的抗纵向水渗透传导试验用试验方法 Test Method for Conducting Longitudinal Water Penetration Resistance Tests On Blocked Conductors
ANSI/ICEA T-34-664-2007 纵向水密封电缆抗纵向水渗透传导试验用试验方法 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
ANSI/IEEE 1493-2006 清洁电缆和附件用溶剂评定指南 Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
ANSI/UL 2556-2007 电线和电缆试验方法的安全标准 Standard for Safety for Wire and Cable Test Methods
ANSI/UL 62-2006 固定设备配线和软线 Flexible Cord and Fixture Wire
ANSI/UL 66-2005 灯头线 Fixture Wire
ANSI/ASTM D6095-2006 压塑交叉连接的热塑性半导体、导体和绝缘屏蔽材料的体电阻纵向测量的试验方法 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ANSI/IEEE 1416-2004 现有气体隔绝变电站中新气体隔绝设备接口的推荐规程 Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations
ANSI/IEEE 101-1995 热寿命测试数据统计分析指南 Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/IEEE 930-2005 电绝缘电压耐久性数据的统计分析指南 Electrical Insulation Voltage Endurance Data, Guide for the Statistical Analysis of
ANSI/ASTM A889-1997 低感应条件下用万用表和25厘米艾普斯亭(Epstein)框测定材料交流磁特性的方法 Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
ANSI/ASTM D6710-2002 烃基淬火油评价指南 Guide for Evaluation of Hydrocarbon-Based Quench Oil
ANSI/IEEE 637-1985 绝缘油的回收及其使用标准指南 Reclamation of Insulating Oil and Criteria for Its Use, Guide for
ANSI/IEEE C57.106-2006 设备中绝缘油的检验和维护用指南 Guide for Acceptance and Maintenance of Insulating Oil in Equipment
ANSI/IEEE C57.111-1995 硅绝缘液体验收指南和在变压器中的维护 Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
ANSI/ASTM D1168-1999 电气绝缘用烃类蜡的试验方法 Test Methods for Hydrocarbon Waxes Used for Electrical Insulating
ANSI/ASTM D295-1999 电绝缘用浸漆棉织物试验方法 Method of Testing Varnish Cotton Fabrics Used for Electrical Insulation (10.01)
ANSI/ASTM D349-2006 电气绝缘用层压圆杆材的试验方法 Test Methods for Laminated Round Rods Used for Electrical Insulation
ANSI/ASTM D619-1999 电绝缘纤维板试验方法 Test Methods for Vulcanized Fibre Used for Electrical Insulation (10.01)
ANSI/ASTM D6343-1999 电绝缘和介电设备用薄形热导电固体材料试验方法 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ANSI/IEEE 1125-1994 SF6型气体绝缘设备中湿度测量和控制指南 Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
ANSI/ASTM D115-2007 电绝缘用含清漆测试溶剂的试验方法 Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
ANSI/ASTM D1932-2004 柔性电绝缘漆耐热性试验方法 Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
ANSI/ASTM D2519-2007 用螺旋线圈试验测定电绝缘清漆粘结强度的试验方法 Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ANSI/ASTM D2756-2007 电绝缘清漆的重量损失用试验方法 Test Method for Weight Loss of Electrical Insulating Varnishes
ANSI/ASTM D3056-2005 无溶剂清漆胶凝时间的试验方法 Test Method for Gel Time of Solventless Varnishes
ANSI/ASTM D3145-2003 用螺旋线圈法测试电绝缘清漆耐热性的试验方法 Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ANSI/ASTM D3251-2004 薄膜绝缘磁性金属丝用电绝缘清漆的热老化特性的试验方法 Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)
ANSI/ASTM D3377-2000 无溶剂清漆重量损失试验方法 Test Method for Weight Loss of Solventless Varnishes
ANSI/ASTM D3955-2004 电绝缘漆规范 Specification for Electrical Insulating Varnishes (10.02)
ANSI/ASTM D411-1998 电绝缘虫胶漆试验方法 Test Methods for Shellac used for Electrical Insulation
ANSI/ASTM D4733-2003 无溶剂电绝缘清漆的试验方法 Test Methods for Solventless Electrical Insulating Varnishes
ANSI/ASTM D4880-2003 漆包磁线上绝缘清漆防盐水腐蚀的试验方法 Test Method for Salt Water Proofness of Insulating Varnishes over Enameled Magnet Wire
ANSI/ASTM D4882-2005 用扭转线圈试验测定电绝缘清漆粘结强度的试验方法 Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted Coil Test
ANSI/ASTM D5637-2005 电绝缘清漆耐湿性的试验方法(10.02) Test Method for Moisture Resistance of Electrical Insulating Varnishes (10.02)
ANSI/ASTM D5638-2005 电绝缘清漆耐化学性的试验方法(10.02) Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02)
ANSI/ASTM D6053-2003 电绝缘漆中挥发性有机化合物含量测定的试验方法 Test Method for Determination of Volatile Organic Compound (VOC) Content of Electric Insulating Varnishes
ANSI/ASTM D784-2003 电气绝缘用柑桔虫胶和其他印度紫胶规范 Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation (10.01)
ANSI/ASTM D1039-1999 用作电绝缘材料的玻璃粘合云母的测试方法 (10.01) Method of Testing Glass-Bonded Mica Used as Electrical Insulation (10.01)
ANSI/ASTM D1677-2002 未处理电绝缘云母纸的取样和试验方法 Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ANSI/ASTM D352-1997 电绝缘用涂浆云母的试验方法 Test Methods for Pasted Mica Used in Electrical Insulation
ANSI/ASTM D748-2000 云母介质固定电容器用天然块状云母和云母薄膜规范 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
ANSI/NEMA FI1-2003 人造电气云母 Manufactured Electrical Mica
ANSI/ASTM D1459-1993 电绝缘用有机硅玻璃漆布规范(10.01) Specification for Silicone Varnished Glass Cloth and for Electrical Insulation (10.01)
ANSI/ASTM D1458-2001 电绝缘用完全硫化硅橡胶涂层玻璃布与玻璃带试验方法 Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
ANSI/ASTM D2149-1997 频率10 MHz 温度 500℃固体陶磁介质的漏电率和耗散因子测定方法 Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Ceramic Dielectrics at Frequencies to 10 MHz and Temperature to 500 Deg C
ANSI/ASTM D2400-1999 浸漆玻璃聚酯电绝缘布规范(10.01) Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation (10.01)
ANSI/ASTM D5642-1999 密封管化学兼容性试验的试验方法 Test Method for Sealed Tube Chemcal Compatability Test
ANSI/ASTM D902-2006 电绝缘用涂覆柔性树脂的玻璃织物和玻璃带状织物的试验方法 Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
ANSI/ASTM D2902-2000 含氟聚合物树脂热缩管件规范(10.02) Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation
ANSI/ASTM D2903-2003 电绝缘用交链氯化聚烯烃热缩管规范 Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ANSI/ASTM D3144-2000 电绝缘用聚1,1-二氟乙烯热缩管件规范(10.02) Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
ANSI/ASTM D3149-2006 电绝缘用交连可吸热的聚烯烃塑料管规范 Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ANSI/ASTM D3150-2000 电绝缘用交联和非交联聚乙烯热缩管型材料规范 Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
ANSI/ASTM D1000-1999 电气和电子设备用压敏粘合剂涂覆带试验方法 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ANSI/ASTM D1047-2007 电线和电缆用聚氯乙烯套的规范 Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable
ANSI/ASTM D1351-2007 电线和电缆用热塑性聚乙烯绝缘规范 Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
ANSI/ASTM D1389-2007 薄层固体电绝缘材料的耐电压测试的试验方法 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ANSI/ASTM D1523-2000 工作在90℃的电线和电缆用合成橡胶绝缘材料的规范 Specification for Synthetic Rubber Insulation for Wire and Cable, 90 C Operation
ANSI/ASTM D1675-2003 聚四氟乙烯管材的试验方法(10.01) Test Methods for Polytetrafluoroethylene Tubing (10.01)
ANSI/ASTM D1822-1999 塑料和电绝缘材料破坏拉伸冲击力测试方法 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ANSI/ASTM D2148-2002 电绝缘用硅胶带试验方法(10.01) Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation (10.01)
ANSI/ASTM D2219-2002 60℃工作温度下聚氯乙烯电线和电缆绝缘规范 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 C Operation
ANSI/ASTM D2220-2002 75℃工作温度下聚氯乙烯电线和电缆绝缘规范 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
ANSI/ASTM D2301-1999 氯化乙烯压敏电绝缘胶带规范 Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D2305-2002 电绝缘聚合薄膜试验方法(94-4,2项)(10.01) Test Methods for Polymeric Films Used for Electrical Insulation (94-4, Item 2) (10.01)
ANSI/ASTM D2308-2007 电线和电缆用热塑性聚乙烯包装物规范 Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
ANSI/ASTM D2484-2006 聚酯薄膜压力敏感的电绝缘胶带用规范 Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D256-1993 塑料及电绝缘材料抗冲击性试验方法 Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02)
ANSI/ASTM D2633-2002 电线和电缆用热塑性绝缘体和护套测试方法 Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
ANSI/ASTM D2655-2000 额定电压达到2000伏的电线和电缆交联聚乙烯绝缘材料规范(10.02) Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
ANSI/ASTM D2656-2006 额定电压2001～35 000V的电线和电缆交联聚乙烯绝缘材料用规范 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
ANSI/ASTM D2686-2006 聚四氟乙烯背面压敏电绝缘胶带的规范 Specification for Polytetrafluoroethylene-backed Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D2754-1999 高温玻璃布压敏电绝缘胶带规范 Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Tape
ANSI/ASTM D2802-2003 电线和电缆用耐臭氧乙丙橡胶绝缘材料规范 Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
ANSI/ASTM D3005-1999 耐低温氯化乙烯压敏电绝缘胶带规范 Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D3006-1999 聚乙烯塑料压敏电绝缘胶带规范 Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D3485-2002 预装配导线和电缆用可盘绕光滑壁聚乙烯导管规范 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ANSI/ASTM D350-2001 经处理的电绝缘软套管试验方法 Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ANSI/ASTM D3554-2007 电线和电缆用耐划痕热塑性高密度聚乙烯绝缘子规范 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable
ANSI/ASTM D3555-2007 90?C工作条件下电线和电缆用抗痕型黑色交联的聚乙烯绝缘材料用规范 Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 C Operation
ANSI/ASTM D3664-2004 电气设备中电容器用双轴取向的聚乙烯对苯二酸脂薄膜规范 Specification for Biaxially Oriented Polyethylene Terephthalate Film for Capacitors in Electrical Equipment
ANSI/ASTM D4245-2002 工作温度为90℃干/75℃湿的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation
ANSI/ASTM D4246-2002 工作温度为90℃的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation
ANSI/ASTM D4313-2003 电线及电缆用普通、重型及超重型交联氯化聚乙烯套管规范 Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable
ANSI/ASTM D4314-1999 普通重负载和超重负载交叉链环的氯磺化聚乙烯电线和电缆护套规范(10.02) Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02)
ANSI/ASTM D4325-2002 非金属半导电和电绝缘胶带试验方法 Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ANSI/ASTM D4363-1998 电线和电缆的热塑氯化聚乙烯套管规范 Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable
ANSI/ASTM D4388-2002 非金属半导电和电绝缘胶带规范 Specification for Nonmetallic Semi-Conducting and Electrically Insulating Tapes
ANSI/ASTM D4514-2006 摩擦带用规范 Specification for Friction Tape
ANSI/ASTM D4568-1999 评价电缆填充物、溢流元件、聚烯烃线和电缆材料相容性的试验方法(10.02) Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02)
ANSI/ASTM D5213-2007 电气绝缘和电介质用聚酰亚胺树脂薄膜规范 Specification for Polymide Resin Film for Electrical Insulation and Dielectric Application
ANSI/ASTM D6096-2007 90℃工作温度下电线和电缆用聚氯乙烯绝缘材料的规范 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 C Operation
ANSI/ASTM D6097-2001 固体电介绝缘材料有孔水柱增高表示相对抗性的试验方法 Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ANSI/ASTM D6097a-2001 固体介电绝缘材料对应通气孔水柱上升的电阻力测试方法 Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ANSI/ASTM D618-1995 测试用电绝缘材料和调理塑料材料的实施规程 Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01)
ANSI/ASTM D69-2006 摩擦带的试验方法 Test Methods for Friction Tapes
ANSI/ASTM D710-1997 电气绝缘用硬化纸板-94,棒-94和管材规范 Specification for Vulcanized Fibre Sheets-94, Rods-94, and Tubes Used for Electrical Insulation (10.01)
ANSI/ASTM D785-1998 塑料及电绝缘材料洛氏硬度测试方法(08.01) Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (08.01)
ANSI/ASTM D866-1999 电线及电缆用丁苯合成橡胶套规范 Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01)
ANSI/ASTM D876-2006 电气绝缘用非刚性氯乙烯高聚物管材的试验方法 Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ANSI/ASTM D922-2000 氯乙烯非硬性聚合物管材规范 Specification for Nonrigid Vinyl Chloride Polymer Tubing
ANSI/ASTM D922d-2000 非硬质聚氯乙烯管规范 Specification for Nonrigid Vinyl Chloride Polymer Tubing
ANSI/ASTM F1837M-1997 热缩电缆端口密封规范(米制) Specification for Heat-Shrink Cable Entry Seals (Metric)
ANSI/ICEA T-28-562-2003 测量聚合物绝缘材料热蠕变性的试验方法 Test Method For Measurement of Hot Creep of Polymeric Insulations
ANSI/UL 1692-2004 聚合材料的安全标准.线圈型 Standard for Safety for Polymeric Materials - Coil Forms
ANSI/UL 224-2006 挤压的绝缘管标准 Standard for Extruded Insulating Tubing
ANSI/ASTM D1305-1999 电工绝缘纸和纸板的规范.硫酸盐层类型 Specification for Electrical Insulating Paper and Paperboard - Sulfate (Kraft) Layer Type
ANSI/ASTM D202-1992 电绝缘用未处理纸的取样和测试方法 Methods of Sampling and Testing Untreated Paper Used for Electrical Insulation (10.01)
ANSI/ASTM D2413-2000 浸透液态电介质的纸及纸板绝缘性电测试和制备的试验方法 Test Methods for Preparation and Electrical Testing of Insulating Paper and Board Impregnated with a Liquid Dielectric
ANSI/NEMA FI3-2004 用于电绝缘的蜡光芳族聚酰胺纸 Calendered Aramid Papers Used for Electrical Insulation
ANSI/ASTM A717/A 717M-2001 单条样品表面绝缘耐性测试方法 Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ANSI/ASTM D149-1995 固体电绝缘材料在工业用电频率下的介电击穿电压和介电强度的试验方法(10.01) Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
ANSI/ASTM D149a-1997 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
ANSI/ASTM D150-1998 实心电绝缘材料的交流损耗特性和电容率(介电常数)的试验方法 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
ANSI/ASTM D176-2007 电绝缘用固体填充物和浸润剂试验方法 Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
ANSI/ASTM D1825-2003 电气试验用镀铜电绝缘材料及热固性叠层板材的浸蚀和清洗的实施规程 Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ANSI/ASTM D2132-2003 电绝缘材料的尘雾痕迹和耐腐蚀的试验方法 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ANSI/ASTM D2275-2001 表面经过部分放电的固体电绝缘材料电压耐久性测试方法(10.01) Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)
ANSI/ASTM D229-2001 电绝缘用硬质薄板及板材试验方法 Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
ANSI/ASTM D2303-1997 绝缘材料液体污染、斜面漏电痕迹和侵蚀的试验方法 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ANSI/ASTM D2304-1997 刚性电绝缘材料耐热性试验方法 Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ANSI/ASTM D2520-2001 微波频率和温度为1650℃时实心电绝缘材料综合介电常数测试验方法(10.02) Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperature to 1, 650°C (10.02)
ANSI/ASTM D257-2007 绝缘材料的直流电阻或电导系数用试验方法 Test Methods for DC Resistance or Conductance of Insulating Materials
ANSI/ASTM D2865-2006 电气绝缘材料测试用标准和设备的校准实施规程 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ANSI/ASTM D3386-2005 电绝缘材料线性热膨胀系数的试验方法 Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
ANSI/ASTM D3394-1994 电绝缘板抽样方法(10.02) Methods of Sampling and Electrical Insulating Board (10.02)
ANSI/ASTM D3426-1995 用冲击波测定电气固体绝缘材料的电介质击穿电压和介电强度的试验方法(10.02) Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02)
ANSI/ASTM D3636-2006 固体电绝缘材料的取样及质量评定的实施 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ANSI/ASTM D3638-1993 电绝缘材料的比较跟踪系数的试验方法 Test Method for Comparative Tracking Index of Electrical Insulating Materials
ANSI/ASTM D372-2000 刚性电绝缘管试验方法 Test Methods for Rigid Tubes Used for Electrical Insulation
ANSI/ASTM D374M-1999 固体电绝缘材料厚度的试验方法(米制) Test Methods for Thickness of Solid Electrical Insulation (Metric) (10.01)
ANSI/ASTM D3755-1997 直流电压应力下电气绝缘材料的介电击穿电压和介电强度的试验方法 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Electrical Insulating Materials Under Direct-voltage Stress
ANSI/ASTM D3756-1997 应用相异场评估固体介质材料电击穿电阻的试验方法 Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
ANSI/ASTM D3850-1994 热解重量分析仪法对固体电绝缘材料快速热降解的试验方法 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI/ASTM D4063-1999 电绝缘板规范 Specification for Electrical Insulating Board
ANSI/ASTM D4565-1999 远程通信电线和电缆用绝缘体和套管物理和环境性能特性的试验方法(10.02) Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
ANSI/ASTM D4566-1998 远程通信电线和电缆用绝缘体和套管电气性能特性试验方法(10.02) Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
ANSI/ASTM D470-2005 电线和电缆用交联绝缘材料和护套的试验方法(10.01) Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
ANSI/ASTM D4872-1999 电线和电缆填充化合物介电试验的试验方法 Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ANSI/ASTM D495-1999 固体电绝缘的高压、低电流和干电弧电阻试验方法 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ANSI/ASTM D5288-1997 使用多种电极材料(不包括铂)测定电绝缘材料漏电痕迹指数的试验方法 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ANSI/ASTM D5374-1999 电绝缘评价用强制对流实验室炉的试验方法 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/ASTM D5470-2006 热传导固体电绝缘薄材料热传导性能测试方法(10.02) Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials (10.02)
ANSI/ASTM D6054-1997 试验用电绝缘材料状态调节的规程 Practice for Conditioning Electrical Insulating Materials for Testing
ANSI/ASTM D668-1999 电绝缘用硬条和硬管尺寸测量方法 Method for Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation (10.01)
ANSI/IEEE 1-2000 电子设备额定值中温度极限和电绝缘评定的一般原则 General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation
ANSI/IEEE 1276-2006 液浸式电力变压器的高温安装材料的使用指南 Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers
ANSI/IEEE 532-2007 电力仪器和控制电缆护套的选择和试验用指南 Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables
ANSI/IEEE 98-2007 固体电气绝缘材料的热评估用试验程序的制备标准 Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
ANSI/UL 1446-2008 绝缘材料的系统用安全标准.一般要求 Standard for Safety for Systems of Insulating Materials - General
ANSI/UL 1653-2006 电工用非金属管 Electrical Nonmetallic Tubing
ANSI/ESD S7.1-2005 静电放电(ESD)易感物品的保护.材料的耐静电特性.地板材料 Protection of Electrostatic Discharge Susceptible Items - Resistive Characterization of Materials - Floor Materials
ANSI/EOS/ESD S6.1-1991 静电放电敏感产品的保护.接地.推荐实施规程 Protection of Electrostatic Discharge Susceptible Items - Grounding - Recommended Practice
ANSI/ESD S6.1-2005 静电放电敏感元件保护的标准实施规程.接地 Standard Practice for the Protection of Electrostatic Discharge Susceptible Items - Grounding
ANSI/ARI 110-2004 空调和冷藏设备铭牌电压 Air-Conditioning and Refrigerating Equipment Nameplate Voltages
ANSI/IIAR 2-1999 氨式机械制冷系统的设备、设计和安装 Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems
ANSI/IIAR 2-1999Addendum a-2005 氨机械制冷系统的设备、设计和安装 Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems
ANSI/IEEE 492-1999 水力发电机运转和维护指南 Operation and Maintenance of Hydro-Generators, Guide for
ANSI/ASTM E1328-1999 光伏太阳能转换术语 Terminology Relating to Photovoltaic Solar Energy Conversion
ANSI/NFPA 851-2005 水力发电厂的防火推荐规程 Recommended Practice for Fire Protection for Hydroelectric Generating Plants
ANSI/ASTM E1900-2007 食品和农产品辐射研究中剂量测定指南 Guide for Dosimetry in Radiation Research on Food and Agricultural Products
ANSI/IEEE 583-1982 模数化测量仪表和数字式接口系统(CAMAC) Modular Instrumentation and Digital Interface System (CAMAC)
ANSI/IEEE 595-1982 串行公共通路接口系统(CAMAC)(计算机自动测量及控制) Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
ANSI/IEEE 596-1982 并行公共通路接口系统(CAMAC)(计算机自动测量及控制) Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
ANSI/IEEE 675-1982 CAMAC箱中的多功能控制器 Multiple Controllers in a CAMAC Crate
ANSI/IEEE 683-1976 CAMAC系统中整块（成组）传送的推荐实施规程 Block Transfers in CAMAC Systems, Recommended Practice for
ANSI/IEEE 726-1982 CAMAC实时BASIC语言 Real-Time BASIC for CAMAC
ANSI/IEEE 758-1979 CAMAC子例程 CAMAC - Subroutines
ANSI/ANS 15.21-1996 研究反应堆安全分析报告格式和内容 Format and Content for Safety Analysis Reports for Research Reactors
ANSI/ANS 15.4-2007 反应堆研究人员的选择和培训 Selection and Training of Personnel for Research Reactors
ANSI/ANS 3.1-1993 核电厂人员选择,资格和培训 Selection, Qualification, and Training of Personnel for Nuclear Power Plants
ANSI/ANS 3.2-2006 核电站运行期的质量保证和行政管理 Administrative Controls and Quality Assurance for the Operational Phase of Nuclear Power Plants
ANSI/ANS 3.4-1996 核电站持证上岗人员的健康认证与监测 Medical Certification and Monitoring of Personnel Requiring Operating Licenses for Nuclear Power Plants
ANSI/IEEE 323-2003 核电站1E级设备的质量鉴定 Qualifying Class 1E Equipment for Nuclear Power Generating Stations
ANSI N15.51-2007 控制核物质的测量控制程序方法.核物质分析化学实验室 Methods of Nuclear Material Control ?Measurement Control Program ?Nuclear Materials Analytical Chemistry Laboratory
ANSI/IEEE 308-2001 核电站1E级电力系统标准 Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
ANSI/IEEE 765-2006 核电站(NPGS)的优先选用电源(PPS)标准 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
ANSI N13.1-1999 核设施中气载放射性材料取样指南 Sampling Airborne Radioactive Materials in Nuclear Facilities, Guide to
ANSI N13.12-1999 间隙表面和容积放射能标准 Surface and Volume Radioactivity Standards for Clearance
ANSI N14.1 Addendum 1-2001 六氟化铀.运输包装 Uranium Hexafluoride - Packaging for Transport
ANSI N14.1 Addendum 2-2004 六氟化铀.运输包装 Uranium Hexafluoride - Packaging for Transport
ANSI N14.1 Addendum 3-2005 运输用六氟化铀的包装 Packaging of Uranium Hexafluoride for Transport
ANSI N14.1-2001 核原料.六氟化铀.运输包装 Nuclear Materials - Uranium Hexafluoride - Packaging for Transport Addendum 1 4/3/2002;
ANSI N14.33-2005 受损核废燃料的储存和运输 Characterizing Damaged Spent Nuclear Fuel For The Purpose of Storage and Transport
ANSI N14.5-1997 放射性原料.运输包装件泄露试验 Radioactive Materials - Leakage Tests on Packages for Shipment
ANSI/ANS 15.2-1999 片状铝铀核燃料元件的质量控制 Quality Control for Plate-Type Uranium-Aluminum Fuel Elements
ANSI/ANS 57.8-1995 核燃料组件的标识 Nuclear Fuel Assembly Identification
ANSI/ANS 57.9-1992 独立的废燃料贮藏设备的设计准则 Design Criteria for an Independent Spent Fuel Storage Installation (Dry Type)
ANSI/ANS 8.17-2004 反应堆外部的轻水反应堆燃料的搬运、贮藏和运输准则 Handling, Storage, and Transportation of LWR Fuel Outside Reactors, Criteria for
ANSI/ASTM D7219-2006 等方性和近等方性核石墨规范 Specification for Isotropic and Near-Isotropic Nuclear Graphites
ANSI/IEEE 344-2004 核电站1E级设备防震鉴定的推荐实施规范 Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
ANSI/IEEE 7-4.3.2-2003 核电站安全系统中数字计算机标准 Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations
ANSI N15.41-1984 核设施.测量控制程序的推导.一般规则 Nuclear Facilities - Derivation of Measurement Control Programs - General Principles
ANSI N320-2005 反应堆应急辐射监控仪器的性能标准 Performance Specifications for Reactor Emergency Radiological Monitoring Instrumentation
ANSI/AISC N690-2006 核设施用有关安全的钢结构规范 Specification for Safety-Related Steel Structures for Nuclear Facilities
ANSI/ANS 1-2000 临界试验的操作 Conduct of Critical Experiments
ANSI/ANS 15.11-1993 研究反应堆设施辐射的防护 Radiation Protection at Research Reactor Facilities
ANSI/ANS 15.16-1982 研究反应堆的应急方案 Emergency Planning for Research Reactors
ANSI/ANS 15.17-1981 研究反应堆的消防措施标准 Fire Protection Program Criteria for Research Reactors
ANSI/ANS 18.1-1999 核电站.源术语规范 Nuclear Power Plants - Source Term Specification
ANSI/ANS 2.23-2002 与地震相关的核电厂反应 Nuclear Plant Response to an Earthquake
ANSI/ANS 2.26-2004 地震设计用核设施结构系统和元部件的分类 Categorization of Nuclear Facility Structures Systems and Components for Seismic Design
ANSI/ANS 3.5-1998 操作者训练和检验用核电厂模拟装置 Nuclear Power Plant Simulators for Use in Operator Training and Examination
ANSI/ANS 5.10-1998 非反应堆核设施处气载微粒释放率 Airborne Release Fractions at Non-Reactor Nuclear Facilities
ANSI/ANS 55.4-1993 轻水反应堆气态放射性废物处理系统 Gaseous Radioactive Waste Processing Systems for Light Water Reactor Plants
ANSI/ANS 55.6-1993 轻水冷却反应堆中液体放射性废物的处理系统 Liquid Radioactive Waste Processing Systems for Light Water Reactor Plants
ANSI/ANS 58.11-1995 轻水反应堆冷却准则 Cooldown Criteria for Light Water Reactors
ANSI/ANS 58.23-2007 火灾概率风险评估(PRA)方法学 Fire PRA Methodology
ANSI/ANS 58.3-1992 核安全有关的系统和元件的物理防护 Physical Protection for Nuclear Safety-Related Systems and Components
ANSI/ANS 58.6-1996 轻水反应堆实施远距离关闭的准则 Remote Shutdown for Light Water Reactors, Criteria for
ANSI/ANS 58.8-1994 核电站.有关安全操作人员行为的时间响应设计准则 Nuclear Power Plants - Time Response Design Criteria for Safety Related Operator Actions
ANSI/ANS 59.3-1992 控制空气系统的核安全准则 Nuclear Safety Criteria for Control Air Systems
ANSI/ANS 6.4-2006 核电站的混凝土辐射屏蔽的核分析和设计导则 Concrete Radiation Shielding for Nuclear Power Plants, Guidelines on the Nuclear Analysis and Design of
ANSI/ANS 8.10-1983 屏蔽和封闭状态下操作中的核临界安全控制准则 Nuclear Criticality Safety Controls in Operations with Shielding and Confinement, Criteria for
ANSI/ANS 8.1-1998 外部反应堆裂变物质操作中核临界安全 Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors
ANSI/ANS 8.12-1987 反应堆外部钚铀混合燃料的核临界控制和安全 Plutonium-Uranium Fuel Mixtures Outside Reactors, Nuclear Criticality Control and Safety of
ANSI/ANS 8.14-2004 反应堆外部核设施中可溶性中子吸收剂的使用 Use of Soluble Neutron Absorbers in Nuclear Facilities Outside Reactors
ANSI/ANS 8.15-1981 专用锕系元素的核临界控制 Nuclear Criticality Control of Special Actinide Elements
ANSI/ANS 8.19-2005 核临界安全.管理规程 Nuclear Criticality Safety - Administrative Practices
ANSI/ANS 8.20-1991 核临界安全培训 Nuclear Criticality Safety Training
ANSI/ANS 8.22-1997 限制和控制慢化剂基础上的核临界安全 Nuclear Criticality Safety Based on Limiting and Controlling Moderators
ANSI/ANS 8.23-2007 核危险事故应急计划和响应 Nuclear Criticality Accident Emergency Planning and Response
ANSI/ANS 8.3-1997 核临界事故报警系统 Criticality Accident Alarm System
ANSI/ANS 8.6-1983 次临界中子增殖现场测量的安全 Safety in Conducting Subcritical Neutron-Multiplication Measurements in situ
ANSI/ANS 8.7-1998 裂变材料储存的核临界安全指南 Nuclear Criticality Safety in the Storage of Fissile Materials, Guide for
ANSI/ASME AG-1-2003 核电站空气和气体处理法规 Code on Nuclear Air and Gas Treatment
ANSI/ASME AG-1a-2004 核气体和气体处理法规 Code on Nuclear Air and Gas Treatment
ANSI/ASME AG-1b-2007 核气体处理规范 Code on Nuclear Air and Gas Treatment
ANSI/ASME BPVCEdition-2001 ASME锅炉和压力容器编码 ASME Boiler and Pressure Vessel Code
ANSI/ASME BPVCRevision-2008 对ASME锅炉和压力容器代码（ 5/18/07次会议） ASME Boiler and Pressure Vessel Code (5/18/07 Meeting)
ANSI/ASME N509-2002 核电厂空气净化设备和部件 Nuclear Power Plant Air Cleaning Units and Components
ANSI/ASME N510-2007 核气处理系统的测试 Testing of Nuclear Air Treatment Systems
ANSI/ASME OM-1990 核电站的运行和维护 Operation and Maintenance of Nuclear Power Plants
ANSI/ASME OMaCode-2005 核电厂的操作和维修规范 Code for Operation and Maintenance of Nuclear Power Plants
ANSI/ASME OMbCode-2006 核电站的操作和维护规程 Code for Operation and Maintenance of Nuclear Power Plants
ANSI/ASME OMCode-2004 核电厂的维护和操作标准 Code for Operation and Maintenance of Nuclear Power Plants
ANSI/ASME OM-S/G-2007 核电厂操作和维修标准和指南 Standards and Guides for Operation and Maintenance of Nuclear Power Plants
ANSI/ASME QME-1-2007 核电站用放射性机械设备的合格证明 Qualification of Active Mechanical Equipment for Nuclear Power Plants
ANSI/ASME RA-Sc-2007 核电站用概率危险评估的标准 Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications
ANSI/ASME/ANS RA-S-2008 概率风险评估为核电厂的申请 Probabilistic Risk Assessment for Nuclear Power Plant Applications
ANSI/IEEE 1082-1997 核电站采纳人类行为可靠性分析的指南 Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations
ANSI/IEEE 1205-2000 核电站用1E级设备老化影响的评定、监测和减轻 Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Sations
ANSI/IEEE 1205Corrigendum 1-2006 评定、监测和减轻核电站用1E级设备老化效应的指南.技术勘误1:热老化模型修正 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
ANSI/IEEE 1289-2004 核电站用基于计算机的监测和控制显示器的设计中的人因工程的应用指南 Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations
ANSI/IEEE 1290-1996 核电站电动控制阀门电机的应用、保护、控制和试验指南 Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
ANSI/IEEE 334-2006 评定核电站1E级电动机连续负荷质量用标准 Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
ANSI/IEEE 336-2005 核装置的1E级电力、仪表和控制设备的安装、检验及试验指南 Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
ANSI/IEEE 338-2007 核电站安全系统周期监督测试标准 Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
ANSI/IEEE 352-1994 核电站安全系统可靠性分析一般原则指南 Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems
ANSI/IEEE 379-2000 核电站安全系统中单一故障标准的应用 Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
ANSI/IEEE 384-1992 1E级设备和电路的独立性标准 Independence of Class 1E Equipment and Circuits, Criteria for
ANSI/IEEE 387-1995 作为核电站备用电源的柴油发电机装置的标准准则 Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
ANSI/IEEE 420-2001 核电站用1E级控制台、控制板及操纵板的设计和合格鉴定标准 Standard for the Design and Qualification of Class 1E Control Boards, Panels and Racks Used in Nuclear Power Generating Stations
ANSI/IEEE 497-2002 核电站用事故监测仪标准判据 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
ANSI/IEEE 497-2002/Cor1-2007 核电站用事故监测仪的标准判据.技术勘误1:2005年用户反馈意见合集 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations - Corrigendum 1: Incorporation of User Feedback through 2005
ANSI/IEEE 572-2006 核电站1E级连接组件的合格证明标准 Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
ANSI/IEEE 577-2004 核电站安全系统的设计及运行中的可靠性分析要求 Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations, Requirements for
ANSI/IEEE 628-2001 核电站1E级电路用管道系统的设计、安装和合格鉴定的标准 Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
ANSI/IEEE 692-1997 核动力发电站安全系统的标准准则 Standard Criteria for Security Systems for Nuclear Power Generating Stations
ANSI/IEEE 741-2007 核电站1E级电力系统和设备保护的标准准则 Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
ANSI/IEEE 833-2005 核电站电气设备防护推荐实施规程 Recommended Practices for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
ANSI/IEEE 933-1999 核电站可靠性工作计划的定义指南 Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations
ANSI/IEEE C37.105-1987 核电站用的1E防护继电器和附件的合格鉴定标准 Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
ANSI/ISA 67.04.01-2006 与核安全相关的仪器仪表设置 Setpoints for Nuclear Safety-Related Instrumentation
ANSI/ISA 67.06.01-2002 在核发电厂中有关和仪器频道安全的性能监测 Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants
ANSI/ISA S67.02.01-1999 核动力厂用有关核安全仪表的传感管路标准 Nuclear-Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants
ANSI/ISA S67.04 Part 1-1994 核安全相关仪器的设置点 Setpoints for Nuclear Safety-Related Instrumentation
ANSI/NFPA 804-2006 先进的轻水反应堆发电站的防火安全标准 Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
ANSI N402-1976 研究反应堆质量保证程序的要求 Quality assurance program requirements for research reactors
ANSI/ANS 14.1-2004 快速脉冲反应堆的运行 Fast Pulse Reactors, Operation of
ANSI/ANS 15.1-2007 研究反应堆用技术规范的开发 The Development of Technical Specifications for Research Reactors
ANSI/ANS 15.8-1995 研究性反应堆质量保证程序要求 Research Reactors, Assurance Program Requirements
ANSI/ANS 19.11-1997 水慢化动力堆反应性的慢化剂温度系数的计算和测量 Calculation and Measurement of the Moderator Temperature Coefficient of Reactivity for Water Moderated Power Reactors
ANSI/ANS 19.1-2002 反应堆设计计算用核数据集 Nuclear Data Sets for Reactor Design Calculations
ANSI/ANS 19.3.4-2002 核反应堆热能沉积率的测定 Determination of Thermal Energy Deposition Rates in Nuclear Reactors
ANSI/ANS 19.3-2005 核反应堆中子反应速率分布和反应性的测定 Neutron Reaction Rate Distributions and Reactivity of Nuclear Reactors, Determination of
ANSI/ANS 19.4-1976 核分析鉴定用参考动力反应堆物理测量的数据获得及文件编制指南 Acquisition and Documentation of Reference Power Reactor Physics Measurements for Nuclear Analysis Verification, Guide for
ANSI/ANS 19.6.1-2005 压水堆重新装料起动的物理试验 Reload Startup Physics Tests for Pressurized Water Reactors
ANSI/ANS 5.1-2005 轻水反应堆衰变热功率 Light Water Reactors, Decay Heat Power in
ANSI/ANS 51.10-1991 加压水冷反应堆的辅助供水系统 Auxiliary Feedwater System for Pressurized Water Reactors
ANSI/ANS 55.1-1992 轻水反应堆固体放射性废物的处理系统 Solid Radioactive Waste Processing System for Light-Water-Cooled Reactor Plants
ANSI/ANS 56.8-2002 核反应堆.安全壳系统泄漏测试要求 Nuclear Reactors - Containment System Leakage Testing Requirements
ANSI/ANS 57.10-1996 轻水反应堆废燃料压实的设计准则 Design Criteria for Consolidation of LWR Spent Fuel
ANSI/ANS 57.1-1992 轻水反应堆燃料处理系统的设计要求 Design Requirements for Light Water Reactor Fuel Handling Systems
ANSI/ANS 57.5-1996 轻水反应堆燃料组件的结构设计和评估 Light Water Reactors Fuel Assembly Mechanical Design and Evaluation
ANSI/ANS 58.9-2002 轻水反应堆有关安全的液体系统的单一故障准则应用 Application of the Single Failure Criterion for Light Water Reactor Safety-Related Fluid Systems
ANSI/ANS 6.1.2-1999 核电站核辐射防护计算用的中子和γ射线截面 Neutron and Gamma-Ray Cross Sections for Nuclear Radiation Protection Calculations for Nuclear Power Plants
ANSI/ANS 6.3.1-1987 轻水反应堆(LWR)中辐射屏蔽的测试用程序 Program for Testing Radiation Shields in Light Water Reactors (LWR)
ANSI/ANS 8.21-1995 固定的中子吸收剂在核设施外围反应堆中的使用 Use of Fixed Neutron Absorbers in Nuclear Facilities Outside Reactors
ANSI/ANS 8.24-2007 核临界安全计算用中子运输法的证实 Validation of Neutron Transport Methods for Nuclear Criticality Safety Calculations
ANSI/ANS 8.5-1996 裂变材料溶液中用作中子吸收剂的硼硅玻璃雷氏环的使用 Use of Borosilicate-Glass Raschig Rings as a Neutron Absorber in Solutions of Fissile Material
ANSI/ASTM C781-2002 高温气冷核反应堆石墨及硼酸化石墨元部件试验惯例 Practice for Testing Graphite and Boronated Graphite Components for High-temperature Gas-cooled Nuclear Reactors
ANSI/IEEE 317-1983 核电站安全壳结构的电气贯穿组件 Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
ANSI/IEEE 382-2006 核电厂安全相关功能的鉴定标准 Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
ANSI/ISA S67.14.01-1994 核设备检测仪和控制人员的资格和认证 Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities
ANSI/ISA S67.14-1994 核设施中测量和控制技术的鉴定和认证 Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities
ANSI/NFPA 805-2006 轻水反应堆发电站的基本防火安全性能标准 Standard on Performance Based Fire Protection for Light Water Reactor Electric Generation Plants
ANSI/ANS 2.10-2003 核电站地震测量仪记录数据的处理和初始评价标准 Criteria for the Handling and Initial Evaluation of Records from Nuclear Power Plant Seismic Instrumentation
ANSI/ASME N511-2007 核气体处理、加热、通风和空气调节系统在用测试标准 Standard for In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air Conditioning Systems
ANSI/IEEE 845-1999 核电站、控制室和其他周边区域人-机系统性能评价指南 Guide to Evaluation of Man - Machine Performance in Nuclear Power Generating Stations, Control Rooms, and Other Peripheries
ANSI/NIRMA CM1.0-2007 核设备结构管理指南 Guidelines for Configuration Management for Nuclear Facilities
ANSI/IEEE 1527-2006 位于地震活跃地区灵活客车工作设计的推荐实施规程 Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
ANSI/IEEE 693-2005 变电站抗震设计的推荐实施规程 Recommended Practice for Seismic Design of Substations
ANSI/ISA 77.70-2005 矿物燃料发电厂设备管道安装 Fossil Fuel Power Plant Instrument Piping Installation
ANSI/UL 1995-2003 加热和冷却设备 Heating and Cooling Equipment
ANSI Z21.40.2-1996 燃气、工作激活空气调节和热泵器具（内然） Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion)
ANSI Z21.40.2-1996 and Z 21.40.2a-1997 CGA 2.92-M9吶?CGA 2.92a-M9瘷窄豺吃炌泭囵全罷嚎国寽梶儇?/CG桁儇哆隌彄U"a" American National Standard/CGA Standard for Air Conditioning and Heat Pump Appliances and Addenda "a", same as CGA 2.92-M96 and CGA 2.92a-M97
ANSI Z21.40.2a-1997 燃气、工作激活空气调节和热泵器具(同 CGA 2.92a) Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2.92a)
ANSI/ARI 310/380-2004 空调和热泵封装引出线的标准 Standard for Packaged Terminal Air-Conditioners and Heat Pumps
ANSI/ARI 340-360-2004 商用和工业用单元空调和热泵设备作业等级 Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment
ANSI/ASHRAE 116-1995 单体空调和热泵季节热效率的试验方法 Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for
ANSI/ASHRAE Standard116-1995 单式空调器和热泵的季节效应试验方法 Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for
ANSI Z21.40.1 and Z 21.40.1a-1997 安全和建设的燃气，热力激活空调和热泵设备 Safety and Construction of Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances
ANSI/UL 2267-2006 工业电瓶货车设备用燃料电池电源系统安全标准 Standard for Safety for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
ANSI/ASTM D6743-2006 有机热传送流体的热稳定性试验方法 Test Method for Thermal Stability of Organic Heat Transfer Fluids
ANSI 1-1990 小型围栏锅炉的测试程序 Mini-Rail Boiler Testing Procedure
ANSI/ARI 400-2001 液体对液体的热交换器 Liquid to Liquid Heat Exchangers
ANSI/ASHRAE 33-2001 强制循环空冷却和空气加热盘管的试验方法 Methods of Testing Forced Circulation Air Cooling and Air Heating Coils
ANSI/ASME PTC12.4-1992 去湿器再加热器 Moisture Separator Reheaters
ANSI/ASME PTC12.5-2000 单相热交换器 Single Phase Heat Exchangers
ANSI/ASME PTC30-1991 空气冷却热交换器 Air Cooled Heat Exchangers
ANSI Z21.63a Addenda-1981 使用液化石油气的非催化气体型的便携式营地用加热器.补充件 Portable camp heaters of other than the catalytic type for use with liquefied petroleum gases; Addenda
ANSI Z21.63b Addenda-1984 使用液化石油气的非催化气体型的便携式营地用加热器.补充件 Portable camp heaters of other than the catalytic type for use with liquefied petroleum gases; Addenda
ANSI Z21.61-1983 燃气的卫生间 Gas-fired toilets
ANSI Z21.11.1a Addenda-1993 房间燃气取暖器.卷1:通风房间用取暖器.补充件 Gas-fired room heaters - Volume I: Vented room heaters; Addenda
ANSI Z21.17a Addenda-1993 家用气体转换燃烧器.补充件 Domestic gas conversion burners; Addenda
ANSI Z21.17b Addenda-1994 家用气体转换燃烧器.补充件 Domestic gas conversion burners; Addenda
ANSI Z21.20-2007 自动燃烧器点火系统和部件用特殊要求、第2部分 Particular Requirements for Automatic Burner Ignition Systems and Components, Part 2
ANSI Z21.20a-2008 自动气体点火系统和元部件 Automatic Gas Ignition Systems and Components
ANSI Z21.23-2000 煤气器具恒温器 Gas Appliance Thermostats
ANSI Z21.23b-2005 燃气器具恒温器 Gas Appliance Thermostats
ANSI Z21.24-2005 燃气器具的连接器 Connectors for Gas Appliances (same as CSA 6.10)
ANSI Z21.24a Addenda-1993 气体器具的金属连接器.补充件 Metal connectors for gas appliances; Addenda
ANSI Z21.35-2005 引燃式燃气过滤器 Pilot Gas Filters
ANSI Z21.35a Addenda-1993 气体控制过滤器装置.补充件 Pilot gas filters; Addenda
ANSI Z21.41-2003 燃气设备快速切断装置 Quick Disconnect Devices for Use With Gas Fuel Appliances (same as CSA 6.9)
ANSI Z21.41a Addenda-1990 与气体燃料连接使用的快速断开装置.补充件 Quick-disconnect devices for use with gas fuel; Addenda
ANSI Z21.41a-2004 燃气器具用快速切断装置(与CSA 6.9a相同) Quick Disconnect Devices For Use With Gas Fuel Applainces (same as CSA 6.9a)
ANSI Z21.41b Addenda-1992 与气体燃料连接使用的快速断开装置.补充件 Quick-disconnect devices for use with gas fuel; Addenda
ANSI Z21.69-2002 移动式燃气器具用连接器 Connectors for Movable Gas Appliances (same as CSA 6.16)
ANSI Z21.69a Addenda-1993 移动式气体器具的连接器.补充件 Connectors for movable gas appliances; Addenda
ANSI Z21.69a-2003 可移动燃气器具用连接器(同 CGA 6.16a) Connectors for Movable Gas Appliances (same as CGA 6.16a)
ANSI Z21.69b-2005 移动式燃气器具用连接器(同CGA 6.16b) Connectors for Movable Gas Appliances (same as CGA 6.16b)
ANSI Z21.71-1993 外场设施装置用自动断续控制点火系统 Automatic intermittent pilot ignition systems for field installation
ANSI Z21.71-1993, and ANSI Z 21.71a-2004 现场装配的自动断续控制的点火系统 Automatic Itermittent Pilot Ignition Systems for Field Installation
ANSI Z21.71a-2004 现场装置用自动断续控制的点火系统 Automatic Intermittent Pilot Ignition Systems for Field Installation
ANSI Z21.75-2007 室外燃气器具和人造住宅的连接器 Connectors For Outdoor Gas Appliances and Manufactured Homes (Same as CSA 6.27)
ANSI Z21.77-2005 人工操作压电型电火花气体点火装置和元件 Manually-Operated Piezo-Electric Spark Gas Ignition Systems and Components
ANSI Z21.77b-2004 手动压电式火花燃气点火系统和部件 Manually Operated Piezo-Electric Spark Gas Ignition Systems and Components
ANSI Z21.78-2005 燃气器具用混合气体控制装置 Combination Gas Controls for Gas Appliances (same as CSA 6.20)
ANSI Z21.78a Addenda-1993 气体器具的混合气体控制装置.补充件 Combination gas controls for gas appliances; Addenda
ANSI Z21.78a-2007 燃气器具的混合气体控制装置 Combination Gas Controls for Gas Appliances (same as CSA 6.20a)
ANSI Z21.78b Addenda-1994 气体器具的混合气体控制装置.补充件 Combination gas controls for gas appliances; Addenda
ANSI Z21.78b-2008 燃气器具用组合燃气控制装置(同CSA6.20b) Combination Gas Controls for Gas Appliances (same as CSA 6.20b)
ANSI/UL 1738-2006 燃气具通风系统安全性标准.II、III和IV类 Standard for Safety for Venting Systems for Gas-Burning Appliances, Categories II, III, IV
ANSI/UL 295-2007 商用工业燃气燃烧器的安全标准 Standard for Safety for Commercial-Industrial Gas Burners
ANSI/ASTM D6469-2004 燃料和燃料系统中微生物杂质指南 Guide to Microbial Contamination in Fuels and Fuel Systems
ANSI/NFPA 8503-1997 粉末燃料系统 Pulverized Fuel Systems
ANSI/NFPA 8505-1998 加煤机操作 Stoker Operation
ANSI/ASME QFO-1-1998 高效能化石燃料燃烧设备操作人员的资格鉴定 Qualification of High Capacity Fossil Fuel Fired Plant Operators
ANSI/ASTM D6021-2006 通过反复顶部空间抽提和硫特定检测来测量残余燃料的总硫化氢含量的试验方法 Test Method for the Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ANSI/ASTM D6421-1999 通过电子孔燃料注射器污渣评价自动火花点火引擎燃料的试验方法 Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ANSI/ASTM D6421a-1999 火花点燃式汽车发动机燃油电子口喷油器结垢的工作台评定试验方法 Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ANSI/ASTM D6423-1999 变性燃料酒精、燃料酒精和酒精的PHE测定方法 Test Method for Determination of the PHE of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
ANSI/ASTM D6426-2007 中间馏分燃料油可过滤性测定的试验方法 Test Method for Determining Filterability of Middle Distillate Fuel Oils
ANSI/ASTM D6445-1999 能量弥散性X射线荧光光谱仪法测定汽油中硫含量的方法 Test Method for Sulfur in Gasoline by Energy-Dispersive X-Ray Fluorescence Spectrometry
ANSI/ASTM D6447-2004 用伏安测量分析法测定航空涡轮燃料的氢过氧化物值的试验方法 Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ANSI/ASTM D6448-2004 来自废润滑油的工业锅炉燃料规范 Specification for Industrial Burner Fuels from Used Lubricating Oils
ANSI/ASTM D6468-2006 蒸馏燃料高温稳定性的试验方法 Test Method for High Temperature Stability of Distillate Fuels
ANSI/ASTM D6483-2004 评价T-9型柴油发动机机油的试验方法 Test Method for Evaluation of Diesel Engine Oils in the T-9 Diesel Engine
ANSI/ASTM D6514-2003 汽轮机油高温通用氧化试验的试验方法 Test Method for High Temperature Universal Oxidation Test for Turbine Oils (1)
ANSI/ASTM D6550-2005 利用超级临界流体色谱法测定汽油中石蜡含量的试验方法 Test Method for the Determination of the Olefin Content of Gasolines by Super-Critical-Fluid Chromatography
ANSI/ASTM D6596-2005 汽油和相关烃类物质的包装和储存的实施规程 Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
ANSI/ASTM D6615-2006 喷射B类宽馏分航空涡轮燃料规范 Specification for Jet B Wide-Cut Aviation Turbine Fuel
ANSI/NFPA 8504-1996 自然通风流化床锅炉操作 Atmospheric Fluidized-Bed Boiler Operation
ANSI/UL 296-2006 燃油炉安全性标准 Standard for Safety for Oil Burners
ANSI/UL 731-2004 燃油供暖机组 Oil-Fired Unit Heaters
ANSI/ASTM F2087-2001 玻璃纤维编织绳和油绳包装惯例 Practices for Packing, Fiberglass, Braided, Rope and Wick
ANSI/CSA LC-3-2000 器具支架 Appliance Stands
ANSI/NFPA 8501-1997 单燃烧室锅炉操作 Single Burner Boiler Operation
ANSI/UL 372-2007 家用和类似用途自动电控制器.第2部分:燃烧器点火系统和组件的特殊要求 Automatic electrical controls for household and similar use - Part 2: Particular requirements for burner ignition systems and components
ANSI/ASTM D4378-2003 蒸汽和燃气轮机矿物油在运行中的监测 In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02)
ANSI/ISA 77.13.01-1999 火电厂汽轮机旁路系统 Fossil Fuel Power Plant Steam Turbine Bypass System
ANSI/NFPA 37-2006 固定式内燃机和燃气轮机的安装标准 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
ANSI/MSE 2000-2005 能量管理系统 A Management System for Energy
ANSI/AWWA C550-2005 阀门和给水栓用防护性内部涂层 Protective Interior Coatings for Valves and Hydrants
ANSI/AWWA C210-2008 钢制水管内外部用液态环氧树脂涂层系统 Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
ANSI B74.23-2002 测量钻石立方体的硼氮磨料的相对晶体强度 Measuring the Relative Crystal Strengths of a Diamond Cubic Boron Nitride Grits
ANSI/ASTM D2534-1988 石蜡覆层动态摩擦系数的试验方法 Test Method for Coefficient of Kinetic Friction for Wax Coatings
ANSI/AWWA C225-2008 钢制水管外部热融聚烯烃涂覆系统 Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
ANSI/NFPA 35-2005 有机覆层的制造 Manufacture of Organic Coatings
ANSI/UL 1332-2005 室外电气设备钢外壳用有机覆层安全标准 Standard for Safety for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
ANSI/ASTM D3288-2007 漆包磁线用试验方法 Test Methods for Magnet-Wire Enamels
ANSI/EIA-364-48A-2006 测量电器连接器件的金属涂层厚度的试验程序 Metallic Coating Thickness Measurement of Contacts Test Procedure for Electrical Connectors
ANSI ATIS0600009-2007 欧盟有害物质标准(RoHS).结构金属、母线和紧固件适应电镀的标准 RoHS - Compliant Plating Standard for Structural Metals, Bus Bars and Fastners
ANSI/ASTM B735-1995 硝酸蒸气测试金属基体上金涂层孔隙率的方法 Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
ANSI/ASTM B741-1995 纸电谱法测量金属基体上金涂层孔隙率的方法 Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography
ANSI/ASTM B798-1995 凝胶体电谱法测定金属基物上金或钯涂层孔隙度的方法 Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ANSI/ASTM B799-1995 亚硫酸/二氧化硫蒸气测定金和钯镀层孔隙度的方法 Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ANSI/IEEE C57.12.31-2002 电杆安装的设备.外壳完整性 Pole Mounted Equipment - Enclosure Integrity
ANSI X3.52-1976 未记录的单片盒式磁盘(正面装入22000BPI).物理和磁性通用要求 Unrecorded Single-Disk Cartridge (Front Loading, 2200 bpi), General, Physical and Magnetic Requirements
ANSI/ASTM B833-2001 热喷涂用锌线规范 Specification for Zinc Wire for Thermal Spraying (Metallizing)
ANSI/AWS C2.18-1993 铝、锌及其合金和复合物的带有热喷覆层的钢的保护 Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites
ANSI/AWS C2.23/C 2.23M-2003 铝、锌及其合金的热喷镀层(金属化处理)和钢防腐蚀保护复合材料的应用规范 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
ANSI/NACE RP0104-2004 阴极保护监测用试样的使用 The Use of Coupons for Cathodic Protection Monitoring Applications
ANSI/SAE J441-1993 线制钢球 Cut Wire Shot
ANSI/AIHA Z9.3-2007 喷漆光饰操作.设计、结构和通风的安全规程 Spray Finishing Operations - Safety Code for Design, Construction, and Ventilation
ANSI C18.1M Part 1-2005 干电池和电池组.规范 Dry Cells and Batteries - Specifications
ANSI C18.1M-1994 干电池和蓄电池的规范 Dry Cells and Batteries - Specifications
ANSI/ASTM B418-1995 铸造和锻造镀锌阳极规范 Specification for Cast and Wrought Galvanic Zinc Anodes
ANSI/ASTM F1178-2001 上釉系统、烘干、金属连接件装置和家具的性能规范 Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
ANSI/IEEE C57.12.32-2002 可潜设备.外壳完整性 Submersible Equipment - Enclosure Integrity
ANSI/IEEE 515.1-2005 商业用电阻加热自动记录仪的试验、设计、安装和维护的标准 Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
ANSI/IEEE 515-2004 工业用电阻热示踪的电缆热试验、设计、安装和维护的推荐实施规程 Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for
ANSI/NECA 202-2001 工业热跟踪系统安装的推荐规程 Standard for Installing Industrial Heat Tracing Systems
ANSI/NFPA 86-2007 烘箱和烤炉 Ovens and Furnaces
ANSI/IPC SM-840CAmendment 1-2000 永久焊接面罩性能和合格鉴定 Qualification and Performance of Permanent Solder Mask
ANSI J-Std-001B-1996 软钎焊电气和电子组件的要求 Requirements for soldered electrical and electronic assemblies
ANSI J-STD-002-1992 元件引线、接线端、焊片、接头和金属丝的软钎焊性试验 Solderability tests for component leads, terminations, lugs, terminals and wires
ANSI J-STD-005 Amendment 1-1997 焊膏要求 Requirements for Soldering Paste
ANSI J-STD-005-1995 焊剂要求 Requirements for soldering pastes
ANSI/AWS A5.31-1993 钎焊和硬钎焊用焊剂 Fluxes for Brazing and Braze Welding
ANSI/AWS A5.8/A 5.8M-2004 钎焊填充金属的规范 Specification for Brazing Filler Metals
ANSI/AWS B2.3-2007 软钎焊接方法和性能合格规范 Specification for Soldering Procedure and Performance Qualification
ANSI/AWS C3.2M/C 3.2-2008 评定硬钎焊接头强度的标准方法 Standard Methods for Evaluating the Strength of Brazed Joints
ANSI/AWS C3.3/C 3.3M-2002 关键铜焊组件的设计、制造与检查 Brazed Components, Design, Manufacture, and Inspection of Critical

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点