畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/AWS C3.3-1980 关键钎焊构件的设计、制造与检查 Brazed Components, Design, Manufacture, and Inspection of Critical
ANSI/AWS C3.4M/C 3.4a-2007 焊枪铜焊规范 Specification for Torch Brazing
ANSI/AWS C3.4M/C3.4-2007 吹管硬焊规范 Specification for Torch Brazing
ANSI/AWS C3.5M/C 3.5-2007 感应钎焊规范 Specification for Induction Brazing
ANSI/AWS C3.5M/C 3.5a-2007 感应铜焊规范 Specification for Induction Brazing
ANSI/AWS C3.6-2007 炉内铜焊规范 Specification for Furnace Brazing
ANSI/AWS C3.7-1993 铝钎焊规范 Specification for Aluminum Brazing
ANSI/AWS C3.7M/C 3.7-2005 铝钎焊规范 Specification for Aluminum Brazing
ANSI/AWS D10.13/D 10.13M-2001 医疗气体系统用铜管和管道钎焊的推荐规程 Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
ANSI/AWS D10.13-1995 医疗气体系统用铜管道和管系的钎焊的推荐实施规程 Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
ANSI/EIA 448-22-1990 耐焊接热的焊接试验方法 Resistance to Soldering Heat, Soldering Method
ANSI/EIA 654-2000 电线和电气元件耐焊接热试验程序 Resistance to Soldering Heat Test Procedure for Wire and Electrical Components
ANSI/EIA-654-2000 电线和电器元件耐焊接热试验程序 Resistance to Soldering Heat Test Procedure for Wire and Electrical Components
ANSI/IPC J-STD-001D-2005 焊接的电气和电子组件的要求 Requirements for Soldered Electrical and Electronic Assemblies
ANSI/IPC J-STD-004A-2004 助焊剂的要求 Requirements for Soldering Fluxes
ANSI/IPC/EIA J-STD-002B-2003 元件引线、终端、接线片、端子和电线的可钎焊性试验 Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires
ANSI/IPC/EIA J-STD-006A-2002 电子钎焊用电子级钎料合金及助熔和非助熔固体钎料的要求 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications
ANSI/AWS C3.8M/C 3.8-2005 黄铜焊接缝的超声检验推荐实施规程 Recommended Practices for the Ultrasonic Examination of Brazed Joints
ANSI/ASTM D2657-2007 聚烯烃管和配件的热熔接实施规程 Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
ANSI/ASTM F722-1982 船上管道系统用焊接接头规范 Specification for Welded Joints for Shipboard Piping Systems
ANSI/AWS B1.10-1999 焊缝无损检测指南 Inspection of Welds, Guide for the Nondestructive
ANSI/AWS B1.11-2000 焊缝视觉检验指南 Guide for the Visual Inspection of Welds
ANSI/AWS B4.0-2007 焊缝的机械测试用标准方法 Standard Methods for Mechanical Testing of Welds
ANSI/AWS D14.4/D 14.4M-2005 机械和设备焊接接头规范 Specification for Welded Joints in Machinery and Equipment
ANSI/AWS G1.10M-2001 气焊、气焊挤压和加热设备热塑对焊评价指南 Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds
ANSI/AWS C4.5M-2006 氧化燃料喷嘴的统一命名系统 Uniform Designation System for Oxyfuel Nozzles
ANSI/AWS D16.2-1994 机器人和自动焊接的元部件 Components of Robotic and Automatic Welding
ANSI/AWS D16.2M/D 16.2-2007 机器人和自动焊接的元部件 Components of Robotic and Automatic Welding
ANSI/AWS F3.2M/F 3.2-2001 焊接烟尘通风指南 Ventilation Guide for Weld Fume
ANSI/NFPA 51-2006 焊接、切割和相关工艺用氧燃料气系统的设计和安装用标准 Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes
ANSI/UL 123-2007 氧燃料气焊枪的标准 Standard for Oxy-Fuel Gas Torches
ANSI/UL 551-1993 变压器型弧焊机 Transformer-Type Arc-Welding Machines
ANSI/UL 60974-1-2004 电弧焊接设备标准.第1部分:焊接电源 Standard for Arc Welding Equipment, Part 1: Welding Power Sources
ANSI/AWS A4.4M-2001 焊接助熔剂和电焊条助熔剂涂层含水量标准测定程序 Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
ANSI/AWS A5.01M/A 5.01-2008 采购指引，为消耗品焊接和专职进程-通量和气体保护电器焊接工艺 Procurement Guidelines for Consumables-Welding and Allied Processes - Flux and Gas Shielded Electrical Welding Processes
ANSI/AWS A5.02/A 5.02M-2006 填充金属的标准尺寸、包装和物理特征 Filler Metal Standard Sizes, Packaging, and Physical Attributes
ANSI/AWS A5.1/A 5.1M-2003 电弧焊接碳钢涂料焊条规范 Carbon Steel Covered Arc-Welding Electrodes, Specification for
ANSI/AWS A5.10/A 5.10M-1999 裸铝和铝合金电焊条及焊条的规范 Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
ANSI/AWS A5.10-1992 无药皮铝和铝合金焊条和焊棒规范 Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for
ANSI/AWS A5.11-97/A 5.11M-2005 气体保护金属极电弧焊用镍和镍合金电焊条规范 Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for
ANSI/AWS A5.12/A 5.12M-1998 电弧焊接和切割用钨及钨合金焊条 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
ANSI/AWS A5.13-2000 保护金属弧焊用堆焊电极规范 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.14/A 5.14M-2005 镍和镍合金裸焊条和焊棒规范 Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes
ANSI/AWS A5.15-1990 铸铁用焊条和焊极规范 Specification for Welding Electrodes and Rods for Cast Iron
ANSI/AWS A5.16/A 5.16M-2007 钛和钛合金电焊条和焊条规范 Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
ANSI/AWS A5.17/A 5.17M-1997 埋弧焊用碳钢电极和助熔剂规范 Specification for Carbon Steel Electrodes and Fluxes for Submerged-Arc Welding
ANSI/AWS A5.18/A 5.18M-2005 气体保护电弧焊用碳钢焊条和焊棒的规范 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
ANSI/AWS A5.18-1993 气体保护电弧焊用碳钢焊条和焊棒 Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
ANSI/AWS A5.19-1992 镁合金焊条和焊棒 Magnesium Alloy Welding Electrodes and Rods
ANSI/AWS A5.2/A 5.2M-2007 氧燃料气焊接的碳钢和低合金钢棒材的规范 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
ANSI/AWS A5.20-2005 助熔芯电弧焊用碳钢电极规范 Carbon Steel Electrodes for Flux Cored Arc Welding, Specification for
ANSI/AWS A5.21-2001 堆焊用裸焊条和焊极规范 Specification for Bare Electrodes and Rods for Surfacing
ANSI/AWS A5.22-2005 助溶剂芯弧焊用不锈钢焊条和钨电极惰性气体保护焊用不锈钢助溶剂芯焊条规范 Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding
ANSI/AWS A5.23/A 5.23M-2007 埋弧焊用低合金钢电极和助熔剂规范 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
ANSI/AWS A5.24/A 5.24M-2004 锆和锆合金焊接电极和焊条规范 Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods
ANSI/AWS A5.25/A.25M-1997 碳钢和高强度低合金钢电渣焊用自耗品规范 Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.26/A 5.26M-1997 碳钢和高强度低合金钢气电焊用自耗品规范 Specification for Consumables Used for Electrogas Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.28/A 5.28M-2005 气体保护电弧焊用低合金钢焊条和焊棒 Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
ANSI/AWS A5.29/A 5.29M-2005 熔剂芯电弧焊用低合金钢焊条的规范 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.3/A 5.3M-1999 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.30/A 5.30M-2007 自耗嵌块规范 Specification for Consumable Inserts
ANSI/AWS A5.3-1991 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.32/A 5.32M-1997 焊接保护气体规范 Specifications for Welding Shielding Gases
ANSI/AWS A5.34/A 5.34M-2007 助熔剂芯电弧焊接用镍合金电极的规范 Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.4/A 5.4M-2006 屏蔽金属电弧焊不锈钢焊接电极 Stainless Steel Welding Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.5/A 5.5M-2006 屏蔽金属电弧焊用低合金钢电焊条的规范 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.6/A 5.6M-2008 铜和铜合金焊条用规范 Copper and Copper-Alloy, Covered Electrodes, Specification for
ANSI/AWS A5.7/A 5.7M-2007 铜和铜合金裸焊条和电焊条规范 Copper and Copper-Alloy Bare Welding Rods, and Electrodes, Specification for
ANSI/AWS A5.9/A 5.9M-2006 裸露不锈钢焊接电极和焊棒规范 Specification for Bare Stainless Steel Welding Electrodes and Rods
ANSI/AWS B2.1-1-210-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS-1和ER70S-2碳钢的带熔化垫材的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-211-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS-1和ER70S-2及E7018碳钢的金属保护电弧焊之后的带熔化垫材的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
ANSI/AWS B2.1-4-220-1999 标准焊接程序规范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-4/P-4/S-4,1或2组)1/8到1/2英寸厚铬钼钢的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application
ANSI/AWS B2.1-5A-225-1999 标准焊接程序规范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-5A或P-5A)1/8到1/2英寸厚铬钼钢的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application
ANSI/AWS B2.1-8-215-2001 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保护焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition
ANSI/AWS B2.1-8-216-2001 标准焊接程序规范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition
ANSI/AWS C5.10/C 5.10M-2003 焊接和等离子体电弧切割用保护气的推荐规程 Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting
ANSI/AWS C7.1-1992 电子束焊接的推荐实施规程 Recommended Practices for Electron Beam Welding
ANSI/AWS C7.1M/C 7.1-2004 电子束焊的推荐性实施规范 Recommended Practices for Electron Beam Welding
ANSI/AWS D8.6/D 8.6M-2005 汽车电阻点焊电极的规范 Specification for Automatic Resistance Spot Welding Electrodes
ANSI/AWS D14.3/D 14.3M-2005 焊接、土方、建筑和农业设备的规范 Specification for Welding, Earthmoving, Construction, and Agricultural Equipment
ANSI/AWS D17.1-2001 航空熔焊规范 Specification for Fusion Welding for Aerospace Applications
ANSI/AWS D15.1/D 15.1M-2007 汽车和机车用铁路焊接规范 Railroad Welding Specification for Cars and Locomotives
ANSI/AWS F1.1-1992 对焊接和相关工艺产生中的悬浮空气粒子的抽样方法 Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
ANSI/ASTM F1934-1998 焊接背包或登山帐篷试验方法 Test Method for Welding a Backpack or Mountaineering Tent
ANSI/AWS A10.1M-2007 单相AC电阻焊接用次级电流传感线圈和焊接电流监视器校正和性能试验规范 Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single Phase AC Resistance Welding
ANSI/AWS A4.3-1993 测定马氏体、贝氏体和铁素体钢电弧焊接金属中可扩散氢含量的标准方法 Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding
ANSI/AWS B2.1.009-1990 10至18号有或无背衬焊态条件下不锈钢(M-8或P-8)钨极气弧焊接 Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.011-1991 在焊接条件下、有或没有垫板、10到18规格镀锌钢的药皮焊条电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification - Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.012-1991 在焊接条件下、有或没有垫板、10到18规格(M-1,1组)碳钢的药皮焊条电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.013-1991 在焊接条件下、有或没有垫板、10到18规格(M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.014-1991 在焊接条件下、有或没有垫板、10到18规格(M-1到M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.015-1991 在焊接条件下、有或没有垫板、10到18规格（M-22/P-22)铝的气体保护钨极弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1.22-015-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格铝(M-22或P-22)的钨电极惰性气体保护焊 Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1/8-006-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的气体保护金属极电弧焊 Gas Metal Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-18, or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1/8-010-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊 Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1/8-014-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的保护金属电弧焊 Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1/8-227-2002 利用轻便仪器测量立体声播放系统震动衰减特性的方法 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, ER309, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1/8-228-2002 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8, 组1)1/8到1-1/2英寸厚,ER309-15、16或17一级管道设备焊接条件下的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1/8-229-2002 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER309、ER309－15、16或17一级管道设备焊接条件下的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1/8-230-2002 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1, 组 1 和 2 焊到 M-8/P-8/S-8, 组 1) 1/16 至 1-1/2 英寸厚, IN309 和 ER309, 焊接状态,主要是管道设施 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1/8-231-2002 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER309、ER309－15、16或17一级管道设备焊接条件下的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-001-2006 在焊接条件下有垫板的3/16～3/4英寸厚的(M-1/P-1、1或2组)碳钢的屏蔽金属电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing
ANSI/AWS B2.1-1-002-2006 焊接条件下、有或没有垫板的3/16～ 7/8英寸(M-1/P-1)1或2组碳钢的气态钨电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing
ANSI/AWS B2.1-1-003-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的气体保护金属极电弧焊 Gas Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-004-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的气体保护金属极电弧焊 Gas Metal Arc Welding of Carbon Steel (M1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-007-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的钨电极惰性气体保护焊 Gas Tungsten Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-008-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊 Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-011-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的镀锌钢的保护金属焊条电弧焊 Standard Welding Procedure Specification - Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-012-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的保护金属焊条电弧焊 Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-016-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-017-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E6010碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-018-2005 在焊接条件下1/8到1-1/2英尺厚E71T-8碳钢的自保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E71T-8, As-Welded Condition
ANSI/AWS B2.1-1-019-2005 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition
ANSI/AWS B2.1-1-020-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-021-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚ER70S-2和E7018碳钢的保护金属电弧焊和钨电极惰性气体保护电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-022-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直上升)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-026-2005 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直下降)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition
ANSI/AWS B2.1-1-027-1998 (M-1/P-1/S-1,1或2组)1/8至3/4英寸厚,E71T-11焊接条件碳钢的自保护管状焊丝弧焊的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2) 1/8 through 3/4 inch Thick, E71T-11 As-Welded Condition
ANSI/AWS B2.1-1-201-2007 主要管道用焊接条件下E6010(垂直向上)及E7018(垂直向上)1/8～3/4英寸厚碳钢(M-1/P-1/S-1,组1或组2)的铠装金属电弧焊接用标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-202-2007 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳钢(M-1/P-1/S-1,1或2组)的屏蔽金属电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-203-2007 焊接条件下,有或没有垫板,18规格镀锌钢(M-1)的气体金属电弧焊(短循环传输模式)的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through Gauge, in the As-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-204-2007 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(底部垂直向下和垂直向上达到平衡)碳钢(M-1/P-1/S-1,1或2组)的屏蔽金属电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-205-2007 主要管道用焊接或PWHT条件下E6010(垂直向上)及E7018(垂直向上)1/8～1-1/2英寸厚碳钢(M-1/P-1/S-1,组1或组2)的铠装金属电弧焊接用标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, (Primarily Pipe Applications)
ANSI/AWS B2.1-1-206-2007 带或不带衬板焊接条件下18～10规格碳钢与奥氏体不锈钢(M-1～M-8、P-8或S-8)的气体保护金属极电弧焊用标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Metal Arc Weldign (Short Circuiting Transfer Mode) of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
ANSI/AWS B2.1-1-207-2007 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚ER70S-2碳钢(M-1/P-1/S-1,组1或组2)的钨电极惰性气体保护焊用标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As-Welded or PWHT Condition (Primarily Pipe Applications)
ANSI/AWS B2.1-1-208-2007 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚E7018碳钢(M-1/P-1/S-1,组1或组2)的屏蔽金属电弧焊用标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-209-2006 主要用于管道的、在焊接或PWHT条件下、1/8到1-1/2英寸厚、ER70S-2和E7018碳钢(M-1/P-1/S-1,1或2组)的屏蔽金属电弧焊之后的气体钨电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Applications)
ANSI/AWS B2.1-1-232-2006 主要管道设施仅平面位置焊接或PWHT条件下用ER70S-3和E7XT-X型1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩气加25%二氧化碳气体保护金属电弧焊(短循环传输模式)再用氩气加25%二氧化碳气体保护助溶剂芯电弧焊接的标准焊接程序规范(SWPS) Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1)Groups 1 and 2, 1/8 through 1-1/2 inch thick, ER70S-3 and E7XT-X, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Applications
ANSI/AWS B2.1-1-233-2006 仅平面位置焊接或PWHT条件下用ER70S-3型1～1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩气加25%二氧化碳气体保护金属电弧焊(短循环传输模式)再用氩气加2%氧气体保护金属电弧焊接(喷雾传输方式)的标准焊接程序规范(SWPS) Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1), Groups 1 and 2, 1/8 through 1-1/2 inch thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Appllications
ANSI/AWS B2.1-1-234-2006 焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、E7XT-X型碳钢用氩气加25%二氧化碳的自保护药芯焊丝电弧焊的标准焊接程序规范(SWPS) Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applicaitons
ANSI/AWS B2.1-1-235-2006 平面位置焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、ER70S-3型碳钢的氩气加2%氧的自保护气体金属弧焊(喷雾传播模式)的标准焊接程序规范(SWPS) Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Applications
ANSI/AWS B2.1-2004 焊接程序和性能鉴定的规范 Specification for Welding Procedure and Performance Qualification
ANSI/AWS B2.1-4-217-1999 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组)ER 80S-B2.在焊接条件下1/8到1/2英寸厚或在PWHT条件下1/8到3/4英寸厚.主要用于管道. Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application
ANSI/AWS B2.1-4-218-1999 标准焊接程序规范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT条件下、(M-4/P-4/S-4,1或2组)E8018-B2、1/8到1/2英寸厚铬钼钢的金属保护焊条电弧焊 Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition or 1/8 through 1-1/2 in. Thick PWHT Condition, Primarily Pipe Application
ANSI/AWS B2.1-4-219-1999 气体保护钨极弧焊以及铬钼钢的气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到12/2英寸厚或在PWHT条件下ER 80S-B2,E 8018-B2,1/8到1/1/2英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application
ANSI/AWS B2.1-4-221-1999 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到1/2英寸厚或在PWHT条件下IN515,ER 80S-B2,E 8018-B2,1/8到1-1/2英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application
ANSI/AWS B2.1-5A-222-1999 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 90S-BS,1/8到1/2英寸厚或在PWHT条件下1/8到3/4英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application
ANSI/AWS B2.1-5A-223-1999 铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 9018-BS,1/8到1/2英寸厚或在PWHT条件下1/8到1-1/2英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER9018-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, Primarily Pipe Application
ANSI/AWS B2.1-5A-224-1999 气体保护钨极弧焊以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在PWHT条件下ER 90S-B3,E 9018-B3,1/8到1-1/2英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application
ANSI/AWS B2.1-5A-226-1999 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在PWHT条件下IN521,ER 90S-B3,E 9018-B3,1/8到1-1/2英寸厚.主要用于管道 Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application
ANSI/AWS B2.1-8-005-2002 在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊 Gas Metal Arc Welding of Austentic Stainless Steel (M-8 or P-8) 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-009-2002 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊 Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-013-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊 Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS B2.1-8-023-2005 在焊接条件下1/8到1-1/2英尺厚奥氏体不锈钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-8/P-8/S-8,1组) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
ANSI/AWS B2.1-8-024-2001 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition
ANSI/AWS B2.1-8-025-2001 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范(WPS) Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition
ANSI/AWS B2.1-8-212-2001 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-8-213-1997 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范(WPS) Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.1-8-214-2001 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8组)的钨电极惰性气体保护焊 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications
ANSI/AWS B2.4-2006 焊接工艺和热塑性塑料性能认证的规范 Specification for Welding Procedure and Performance Qualification for Thermoplastics
ANSI/AWS C1.1M/C 1.1-2000 电阻焊接推荐惯例 Recommended Practices for Resistance Welding
ANSI/AWS C1.4M/C 1.4-2000 碳钢和低合金钢电阻焊规范 Specification for Resistance Welding of Carbon and Low-alloy Steels
ANSI/AWS C2.21M/C 2.21-2003 热喷涂设备验收检验规范 Specification for Thermal Spray Equipment Acceptance Inspection
ANSI/AWS C4.6M-2006 热切割.热切割分类.产品几何量技术规范和质量公差 Thermal Cutting - Classification of Thermal Cuts - Geometric Product Specification and Quality Tolerances
ANSI/AWS C5.2-2001 等离子电弧切割推荐规程 Plasma-Arc Cutting, Recommended Practices for
ANSI/AWS C5.3-2000 空气碳弧气刨和切割推荐规程 Recommended Practices for Air-Carbon-Arc Gouging and Cutting
ANSI/AWS C5.5/C 5.5M-2003 钨电极惰性气体保护焊的推荐规范 Recommended Practices for Gas-Tungsten-Arc Welding
ANSI/AWS C5.7-2000 气电焊的推荐规程 Recommended Practices for Electrogas Welding
ANSI/AWS C6.1-1989 摩擦焊接的推荐实施规程 Recommended Practices for Friction Welding
ANSI/AWS C6.2/C 6.2M-2006 金属焊接摩擦的合格和规范 Specification for Qualification of Friction Welding of Metals
ANSI/AWS C7.2-1998 激光束焊接、切割和打孔推荐规程 Recommended Practices for Laser Beam Welding, Cutting, and Drilling
ANSI/AWS C7.3-1999 电子束焊接工艺规范 Process Specification for Electron Beam Welding
ANSI/AWS C7.4/C 7.4M-2008 激光束焊接操作人员资格鉴定的程序规范 Process Specification and Operator Qualification for Laser Beam Welding
ANSI/AWS D1.1/D 1.1M-2006 结构焊接代码.钢 Structural Welding Code - Steel
ANSI/AWS D1.1-1998 钢结构性焊接规程 Structural Welding Code - Steel
ANSI/AWS D1.2/D 1.2M-2003 结构焊接规则.铝 Structural Welding Code - Aluminum (includes ANSI/AWS D1.2A-83, Commentary)
ANSI/AWS D1.3/D 1.3M-2007 结构焊接规则.薄钢板 Structural Welding Code - Sheet Steel
ANSI/AWS D1.4/D 1.4M-2005 结构焊接规范.钢筋 Structural Welding Code - Reinforcing Steel
ANSI/AWS D1.4-1997 增强钢结构焊接规程 Structural Welding Code - Reinforcing Steel
ANSI/AWS D1.6-2007 钢结构焊接规范.不锈钢 Structural Welding Code - Stainless Steel
ANSI/AWS D1.8/D 1.8M-2005 结构焊接规范.地震增补 Structural Welding Code - Seismic Supplement
ANSI/AWS D1.9/D 1.9M-2007 结构焊接代码.钛 Structural Welding Code - Titanium
ANSI/AWS D10.10-1999 管和管道焊接局部加温推荐规程 Recommended Practices for Local Heating of Welds in Piping and Tubing
ANSI/AWS D10.11M/D 10.11-2007 焊接无背衬管的根部焊道指南 Guide for Root Pass Welding of Pipe Without Backing
ANSI/AWS D10.12M/D 10.12-2000 焊接低碳钢管指南 Guide for Welding Mild Steel Pipe
ANSI/AWS D10.18M/D 10.18-2008 铁素体/奥氏体二相不锈钢管的焊接指南 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing
ANSI/AWS D10.4-1986 焊接奥氏体铬镍不锈钢管推荐惯例 Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for
ANSI/AWS D10.6-2000 钛管和管道钨电极气体保护焊推荐规程 Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for
ANSI/AWS D10.7M/D 10.7-2008 指南为气体保护焊的铝及铝合金管 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
ANSI/AWS D11.2-2006 铁铸件焊接指南 Guide for Welding Iron Castings
ANSI/AWS D14.6-2004 设备的旋转元件的焊接规范 Specification for Welding of Rotating Elements of Equipment
ANSI/AWS D17.2/D 17.2M-2007 航空航天用点和缝电阻焊接的规范 Specification for Aerospace Spot and Seam Resistance Welding
ANSI/AWS D18.1-1999 卫生洁具用奥氏体不锈钢管和管道的焊接规范 Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications
ANSI/AWS D18.2-1999 奥氏体不锈钢管内部焊接褪色度指南 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
ANSI/AWS D18.3/D 18.3M-2005 卫生用途的槽罐、容器和其他设备的焊接规范 Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications
ANSI/AWS D3.5-1993 钢船壳结构焊接指南 Steel Hull Welding, Guide for
ANSI/AWS D3.6M-1999 水下焊接 Underwater Welding
ANSI/AWS D3.7-2004 铝制船体焊接指南 Guide for Aluminum Hull Welding
ANSI/AWS D8.14-2000 机动车零部件焊接质量规范.铝极弧焊 Specification for Automotive Components Weld Quality - Aluminum Arc Welding
ANSI/AWS D8.1M-2007 汽车的焊接质量规范.钢的接触点焊 Specification for Automotive Weld Quality - Resistance Spot Welding of Steel
ANSI/AWS D8.7-2004 汽车焊接质量的推荐规程.电阻点焊 Recommended Practice for Automotiv Weld Quality - Resistance Spot Welding
ANSI/AWS D8.8M-2007 机动车框架焊接质量的规范.电弧焊 Specification for Automotive Frame Weld Quality - Arc Welding
ANSI/AWS D8.9-2002 汽车薄型钢材的耐点焊特性试验方法的推荐性惯例 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
ANSI/AWS D9.1M/D 9.1-2006 金属薄板焊接代码 Sheet Metal Welding Code
ANSI/AWS F6.1-1978 手工电弧焊和手工切割声级测量方法 Method for Sound Level Measurement of Manual Arc Welding and Cutting Processes
ANSI/AWS G1.2M/G 1.2-1999 热塑性塑料标准化超声焊接试件规范 Specification for Standardized Ultrasonic Welding Test Specimens for Thermoplastics
ANSI/AWS G2.4/G 2.4M-2006 钛和钛合金熔焊指南 Guide for the Fusion Welding of Titanium and Titanium Alloys
ANSI/AWS F2.2-2001 镜头遮光罩选择器 Lens Shade Selector
ANSI/AWS A3.0-2001 标准焊接术语和定义 Standard Welding Terms and Definitions
ANSI Z49.1-2005 焊接、切割和相关工艺中的安全 Welding, Cutting and Allied Processes, Safety in
ANSI/AWS A1.1-2001 焊接工业的米制实施规程指南 Metric Practice Guide for the Welding Industry
ANSI/AWS B5.1-2003 焊接检验员的资格认证规范 Specification for the Qualification of Welding Inspectors
ANSI/AWS B5.14-2002 焊接销售代表资质鉴定规范 Specification for the Qualification of Welding Sales Representatives
ANSI/AWS B5.16-2006 焊接工程师资格认可规范 Specification for the Qualification of Welding Engineers
ANSI/AWS B5.17-2008 焊接加工人员资格鉴定用规范 Specification for the Qualification of Welding Fabricators
ANSI/AWS B5.2-2001 焊接检验专业人员和焊接检验助理人员资质规范 Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants
ANSI/AWS B5.4-2005 焊工试验设备的合格鉴定规范 Specification for the Qualification of Welder Test Facilities
ANSI/AWS B5.5-2000 焊接教员的资格认定 Specification for the Qualification of Welding Educators
ANSI/AWS B5.9-2006 焊接监理资质规范 Specification for the Qualification of Welding Supervisor
ANSI/AWS C1.5-2005 电阻焊技术员资格鉴定规范 Specification for the Qualification of Resistance Welding Technician
ANSI/AWS F1.6-2003 环境保护局(EPA)评价焊接排放物的指南和通风许可报告 Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting
ANSI/AWS G1.6-2006 热气焊挤压和加热工具对塑料焊接检验师资格规范 Specification for the Qualification of Plastics Welding Inspectors for Hot Gas Extrusion, and Heated Tool Blutt Thermoplastic Welds
ANSI/FM 4950-2007 热加工用焊接垫、焊接毯和焊接护帘 Welding Pads, Welding Blankets and Welding Curtains for Hot Work Operations
ANSI B175.4-2006 便携式、手持式、内燃机驱动切割机的安全要求 For Outdoor Power Equipment ?Portable, Handheld, Internal-Combustion-Engine-Driven Cut-Off Machines ?Safety Requirements : 1990
ANSI/ASME B18.3.2M-1979 六角钻头(米制系列) Keys and Bits, Hexagon (Metric Series)
ANSI/ASME B107.10-2005 手动套筒扳手的手柄及附件 Handles and Attachments for Hand Socket Wrenches
ANSI/ASME B107.11M-2002 老虎钳、对角线切削和镊子、侧面掏槽 Pliers, Diagonal Cutting, and Nippers, End Cutting
ANSI/ASME B107.1-2007 手动管钳子 Socket Wrenches, Hand
ANSI/ASME B107.12-2004 螺母旋具(旋转型旋具夹紧器)(英制) Nut Drivers (Spin Type, Screwdriver Grip) (Inch Series)
ANSI/ASME B107.13M-2003 尖嘴长臂钳 Pliers - Long Nose, Long Reach
ANSI/ASME B107.15-2002 平头和十字槽螺钉旋具 Flat-Tip and Phillips Screwdrivers
ANSI/ASME B107.16M-1998 台式和手动金属切割剪 Shears (Metal Cutting, Bench, and Hand)
ANSI/ASME B107.17M-1997 扳手开口标准量规 Gages, Wrench Openings, Reference
ANSI/ASME B107.18-2003 老虎钳(金属丝钳) Pliers (Wire Twister)
ANSI/ASME B107.18M-2003 老虎钳(金属丝绞扭器) Pliers (Wire Twister)
ANSI/ASME B107.19-2004 扣环钳 Pliers, Retaining Ring
ANSI/ASME B107.20M-2004 线路工、打铁工、煤气工、玻璃工和篱笆工用钳 Pliers (Lineman's, Iron Worker's, Gas, Glass, and Fence)
ANSI/ASME B107.21-2005 扳手及爪形附件 Wrench, Crowfoot Attachments
ANSI/ASME B107.22M-1998 电子切削工具和电子钳 Electronic Cutters and Pliers
ANSI/ASME B107.23-2004 可调多位钳 Pliers, Multiple Position, Adjustable
ANSI/ASME B107.24-2007 钳子:锁、钳和油管夹 Pliers: Locking, Clamp, and Tubing Pinchoff
ANSI/ASME B107.25-2007 老虎钳.性能试验方法 Pliers - Performance Test Methods
ANSI/ASME B107.26-2007 手动螺丝起子头 Screwdriver Bits, Hand Driven
ANSI/ASME B107.27-2003 电连接器用多位钳 Pliers, Multi-Position, Electrical Connector
ANSI/ASME B107.29-2005 电子测试仪.手工扭矩工具 Electronic Tester, Hand Torque Tools
ANSI/ASME B107.30-2002 十字头螺钉旋具 Cross Tip Screwdrivers
ANSI/ASME B107.31M-1997 十字头计量标准器用旋具 Screwdriver, Cross Tip Gaging Standard
ANSI/ASME B107.33M-2002 冲击套筒扳手(米制系列) Socket Wrenches, Impact (Metric Series)
ANSI/ASME B107.34M-2003 火花塞套筒扳手 Socket Wrenches for Spark Plugs
ANSI/ASME B107.37-2007 老虎钳.钢丝钳/剥线钳 Pliers - Wire Cutters/Strippers
ANSI/ASME B107.41M-2004 钉锤.安全要求 Nail Hammers - Safety Requirements
ANSI/ASME B107.42M-1997 手斧.安全要求 Hatchets - Safety Requirements
ANSI/ASME B107.43-2002 电子试验机.手动扭矩工具 Electronic Tester, Hand Torque Tools
ANSI/ASME B107.43M-1998 木材劈裂楔.安全要求 Wood Splitting Wedges - Safety Requirements
ANSI/ASME B107.46M-2004 螺柱、螺钉和管取出器.安全要求 Stud, Screw and Pipe Extractors - Safety Requirements
ANSI/ASME B107.48-2005 金属凿、凿孔机和冲钉:安全要求 Metal Chisels, Punches, and Drift Pins: Safety Requirements
ANSI/ASME B107.50-2007 修砖錾、砌砖工具和星形钻头 Brick Chisels, Brick Sets, and Star Drills
ANSI/ASME B107.52-2007 起钉棒和撬杆 Nail Puller Bars And Pry Bars
ANSI/ASME B107.53M-2004 手工工具.圆头锤.安全要求 Hand Tools - Ball Peen Hammers - Safety Requirements
ANSI/ASME B107.54-2001 重击工具.安全要求 Heavy Striking Tools - Safety Requirements
ANSI/ASME B107.55M-2002 斧子.安全性要求 Axes - Safety Requirements
ANSI/ASME B107.56-2007 手工修理工具 Body Repair Tools
ANSI/ASME B107.57-2005 瓦工锤和探查镐 Bricklayers' Hammers & Prospecting Picks
ANSI/ASME B107.58-2007 铆锤、敲除水垢用锤和锡工用小锤.安全要求 Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
ANSI/ASME B107.59-2007 冲击扳手 Slugging and Striking Wrenches
ANSI/ASME B107.5M-2002 手持式套筒扳手(米制) Socket Wrenches, Hand (Metric Series)
ANSI/ASME B107.66M-2007 棘轮套筒扳手 Ratcheting Box Wrenches
ANSI/ASME B107.8-2007 可调扳手 Adjustable Wrenches
ANSI/HTI B173.4-1991 斧子.安全要求 Axes - Safety Requirements
ANSI/HTI B173.8-1991 铆接、定标和白铁工铆钉锤.安全要求 Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
ANSI/HTI B209.2-1991 手工工具.金属冲头和尖冲钉.安全要求 Hand Tools - Metal Punches and Drift Pins - Safety Requirements
ANSI/SCTE 14-2007 六角形压接工具的验证/校准用试验方法 Test Method for Hex Crimp Tool Verification/Calibration
ANSI B165.1-2005 电动工具.电驱动涂刷工具.设计、保养和使用的安全要求 Power Tools - Power-Driven Brushing Tools - Safety Requirements for Design, Care, and Use
ANSI/ASME B107.28-2005 电子扭矩装置 Electronic Torque Instruments
ANSI/ASME B107.38M-1998 电子钳 Electronic Pliers
ANSI/ASME B107.38M-200x-1998 电子钳 Electronic Pliers
ANSI/ASME B107.44-2007 凿子.按装玻璃用细长凿、地板装饰和电工用凿 Chisels - Glaziers, Wood, Ripping, Flooring/Electricians
ANSI/UL 60745-1-2007 手持式机动电动工具标准.安全.第1部分:一般要求 Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements
ANSI/UL 60745-2-11-2004 手持式电动工具的安全标准.安全.第2-11部分:往复锯的特殊要求 Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws
ANSI/UL 60745-2-1-2006 手持式电动工具.安全.第2-1部分:钻机和冲击式钻机的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills
ANSI/UL 60745-2-14-2007 手持式电动工具的标准.安全性.第2-14部分:刨机的特殊要求 Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers
ANSI/UL 60745-2-17-2006 手持式电动工具.安全.第2-17部分:刳刨机和修整机的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-17: Particular Requirements for Routers and Trimmers
ANSI/UL 60745-2-18-2005 手持式电动工具的安全标准.安全.第2-18部分:打包工具的特殊要求 Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools
ANSI/UL 60745-2-19-2005 手持式电动工具的安全标准.安全.第2-19部分:刨边机的特殊要求 Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements for Jointers
ANSI/UL 60745-2-20-2005 手持式电动工具的安全标准.安全.第2-20部分:带锯的特殊要求 Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws
ANSI/UL 60745-2-2-2006 手持式电动工具.安全.第2-2部分:旋具和冲击式扳手的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches
ANSI/UL 60745-2-3-2007 手持式电动机带动的电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求 Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders
ANSI/UL 60745-2-4-2006 手持式电动工具.安全.第2-4部分:盘式除外的打磨机和抛光机的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type
ANSI/UL 60745-2-5-2007 手持式机动电动工具标准.安全.第2-5部分:圆盘锯的特殊要求 Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-5: Particular Requirements for Circular Saws
ANSI/UL 60745-2-6-2006 手持式电动工具的安全.安全.第2-6部分:电锤的特殊要求 Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers
ANSI/UL 60745-2-8-2006 手持式电动工具.安全.第2-8部分:剪切机和板料切锯机的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers
ANSI/UL 60745-2-9-2006 手持式电动工具.安全.第2-9部分:攻丝机的特殊要求 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers
ANSI/UL 745-1-2004 便携式电动工具的安全标准.第1部分:一般要求 Standard for Safety for Portable Electric Tools - Part 1: General Requirements
ANSI/UL 745-2-30-2006 订书机的安全标准.特殊要求 Standard For Safety For Particular Requirements for Staplers
ANSI/UL 745-2-3-2006 研磨机、抛光机和盘式砂轮机特殊要求的安全标准 Standard for Safety for Particular Requirements for Grinders, Polishers and Disk-Type Sanders
ANSI/UL 745-2-36-2006 手动工具的安全标准.特殊要求 Standard for Safety for Particular Requirements for Hand Motor Tools
ANSI/UL 745-4-36-2006 电池组手动工具的特殊要求安全标准 Standard for Safety for Particular Requirements for Battery Operated Hand Motor Tools
ANSI SNT 101-2002 动力工具.便携式压缩空气驱动的紧固件旋入工具的安全要求 Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
ANSI SNT-101-1993 动力工具.便携式压缩空气驱动的紧固驱动工具.安全要求 Power Tools - Portable, Compressed-Air-Actuated, Fastener Driving Tools - Safety Requirements for
ANSI SNT101-2002 动力工具.便携式压缩空气驱动的紧固件旋锯安全要求 Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
ANSI/ASME B107.2-2002 电动冲击式延伸、接合及万向接头套筒扳手(英制) Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series)
ANSI/ASME B107.4M-2005 便携式手动、气动和电动工具用驱动和从动端 Driving and Spindle Ends for Portable Hand, Air, and Electric Tools
ANSI B11.12-2005 机床.滚轧成型和滚轧弯曲机床.制造、维护和使用的安全要求 Machine Tools - Roll-Forming and Roll-Bending Machines - Safety Requirements for the Construction, Care, and Use
ANSI/AWS D14.7/D 14.7M-2005 工业轧辊表面加工和检修的推荐规程 Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls
ANSI B11.1-2001 机床.机械动力压力机.制造、维护和使用的安全要求 Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use
ANSI B11.15-2001 机床.管道和型材弯曲机的安全要求 Machine Tools - Safety Requirements for Pipe, Tube, and Shape Bending Machines
ANSI B11.16-2003 粉末/金属压力机的安全要求 Safety Requirements for Powder / Metal Compacting Presses
ANSI B11.17-2004 机床.卧式液力挤压机的制造、维护和使用的安全要求 Machine Tools - Horizontal Hydraulic Extrusion Presses,- Safety Requirements for Construction, Care, and Use
ANSI B11.3-2002 机床.动力压弯机的安全要求 Machine Tools - Safety Requirements for Power Press Brakes
ANSI B11.4-2003 机床.剪床的安全要求 Machine Tools - Safety Requirements for Shears
ANSI B5.52M-1980 开式通用单点机械压力机(米制) Presses, General Purpose, Single Point, Gap Type, Mechanical Power (Metric)
ANSI B65.5-2006 独立操作的滚压机安全标准 Safety Standard - Stand-Alone Platen Presses
ANSI/ASAE EP486.1-2000 浅基础设计 Shallow Post Foundation Design
ANSI/ASME B5.52-2003 GAP型(米制)单点通用机械动力冲压机 Mechanical Power Presses, General Purpose, Single Point, Gap Type (Metric)
ANSI/ASME B5.55M-1994 机动压力机制动装置规范和性能标准 Specification and Performance Standard, Power Press Brakes
ANSI/ASME B5.56M-1994 动力剪切机规范和性能标准 Specification and Performance Standard, Power Shears
ANSI/ASME B5.61-2003 通用单动直边式动力压力机 Power Presses - General Purpose Single Action Straight Side Type
ANSI/ASME B94.18.1-1987 基本球锁紧轻型和重型冲头(米制) Punches, Basic Ball-Lock, Light and Heavy-Duty (Metric)
ANSI/ASME B94.22.1-1977 冲头.各种头型(米制) Punches - Variable, Head Type (Metric)
ANSI/ASME B94.29.1-1977 基本球锁紧凹模镶环(米制) Die-Buttons - Basic Ball-Lock (Metric)
ANSI B7.1-2000 砂轮的使用、维护和保养 Safety Requirements for the Use, Care and Protection of Abrasive Wheels Copyright Held By UAMA, Unified Abrasives Manufacturers' Associations
ANSI B7.7-2003 涂磨料的研磨材料的安全要求 Safety Requirements for Abrading Materials with Coated Abrasives Systems
ANSI B74.10-2001 磨料粉末的分级 Grading of Abrasive Microgrits Now Copyrighted by UAMA
ANSI B74.11-1993 滚磨碎屑磨料的规范 Specifications for tumbling chip abrasives
ANSI B74.12-2001 抛光和工业通用磨轮的磨粒尺寸 Specifications for the Size of Abrasive Grain - Grinding Wheels, Polishing and General Industrial Uses Now Copyrighted by UAMA
ANSI B74.13-1990 打磨砂轮和其它粘结磨料的识别标志记 Markings for Identifying Grinding Wheels and Other Bonded Abrasives Now Copyrighted by UAMA
ANSI B74.14-2007 氧化铝磨粒与磨料的化学分析用方法 Methods of Chemical Analysis of Aluminum Oxide Abrasive Grain and Abrasive Crude
ANSI B74.15-1992 碳化硅磨料粒和天然磨料的化学分析方法 Methods of Chemical Analysis of Silicon Carbide Abrasive Grain and Abrasive Crude
ANSI B74.16-2002 检验金刚石和立方体硼氮磨料粒度的尺寸 Checking the Size of Diamond Abrasive Grain Now Copyrighted by UAMA
ANSI B74.18-2006 涂覆在磨料制品上的细磨粒的等级 Grading of Certain Abrasive Grain on Coated Abrasive Material
ANSI B74.19-2002 磨粒磁性测定试验 Test for Determining Magnetic Content of Abrasive Grains
ANSI B74.20-2004 亚筛粒度中金刚石粉末的分级 Grading of Diamond Powder in Sub-Sieve Sizes
ANSI B74.21-2002 陶瓷粘结砂轮疲劳度的检验程序 Fatigue Proof Test Procedure for Vitrified Grinding Wheels
ANSI B74.2-2003 砂轮的形状、尺寸和装配砂轮的形状、尺寸和标识规范 Specifications for Shapes and Sizes of Grinding Wheels, and for Shapes, Sizes and Identification of Mounted Wheels Now Copyrighted by UAMA
ANSI B74.22-1991 27型便携式打磨砂轮的设计试验 Design Test for Type 27 Portable Grinding Wheels Now Copyrighted by UAMA
ANSI B74.3-2003 金刚石或CBN磨料制品形状和尺寸的规范 Specifications for Shapes and Sizes of Diamond or CBN Abrasive Products
ANSI B74.4-1992 磨料颗粒的容积密度的测定程序 Procedure for Bulk Density of Abrasive Grains
ANSI B74.5-2007 磨料颗粒的毛细试验 Capillarity of Abrasive Grains, Test for
ANSI B74.6-2007 磨料颗粒的抽样规程 Sampling of Abrasive Grains, Procedure for
ANSI B74.8-1987 用球磨机试验磨料颗粒易脆性的推荐实施规程 Ball Mill Test for Friability of Abrasive Grain Now Copyrighted by UAMA
ANSI/BIFMA X5.3-2007 锉.垂直试验 Files, Tests for Vertical
ANSI/ASME B18.29.1-1993 螺纹衬套.无负荷旋入和螺纹锁紧（英制系列） Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series)
ANSI/ASME B5.10-1994 机用锥体(自动夹紧和大锥度序列) Machine Tapers (Self Holding and Steep Taper Series)
ANSI/ASME B94.9-1999 切削和研磨螺纹丝锥 Taps, Cut and Ground Threads
ANSI B212.9-1994 可倾斜圆盘锯用硬质合金坯料 Carbide Blanks for Tipping Circular Saws
ANSI/ASME B94.51M-1999 带锯条规范(金属切割) Specifications for Band Saw Blades (Metal Cutting)
ANSI/ASME B94.52M-1999 弓形锯锯条规范 Specifications for Hacksaw Blades
ANSI B212.15-1994 切削工具.硬质合金镶嵌钻头的砖砌体钻及其砖砌体钻的毛坯 Cutting Tools - Carbide-Tipped Masonry Drills and Blanks for Carbide-Tipped Masonry Drills Revision and Redesignation of ANSI B94.12-1977(R1987); Incorporates ANSI B212.15A-1995 Never Published; This is Now Copyrighted by CCPA
ANSI B5.11-1964 多轴钻头用轴头和可调接头 Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI B94.49-1975 扁钻刀刃和扁钻刀柄 Spade Drill Blades and Spade Drill Holders
ANSI/ASME B5.11-1964 多轴钻床床头箱的轴头和可调适配器 Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI/ASME B94.2-1995 铰刀 Reamers
ANSI/ASME B94.49-1975 扁钻片和扁钻夹持装置 Spade Drill Blades and Spade Drill Holders
ANSI/UL 745-2-31-2006 金刚石芯钻头的安全标准.特殊要求 Standard for Safety for Particular Requirements for Diamond Core Drills
ANSI B94.21-1968 刨齿刀 Gear Shaper Cutters
ANSI B94.7-1980 滚铣刀 Hobs
ANSI B94.8-1967 插入式刀形铣刀体 Inserted Blade Milling Cutter Bodies
ANSI/ASME B94.19-1997 铣刀和立铣刀 Milling Cutters and End Mills
ANSI/ISO 6462-1983 带可转位刀片的平面铣刀.尺寸 Face Milling Cutters with Indexable Inserts - Dimensions
ANSI/ISO 6986-1983 带可转位刀片的侧铣刀和平面（立）铣刀.尺寸 Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions
ANSI/ISO/IEC 11529-1-2004 铣刀.名称与符号.第1部分:实心或镶刃设计的柄式端铣刀 Milling cutters - Designation - Part 1: Shank type end mills of solid or tipped design
ANSI/ISO/IEC 11529-2-2004 铣刀.名称与符号.第2部分:带可转位刀片的柄式和孔式铣刀 Milling cutters - Designation - Part 2 - Shank type and bore type milling cutters with the indexable inserts
ANSI B212.1-2002 硬质合金坯料、钎焊和实心单点工具 Carbide Blanks, Brazed and Solid Single-Point Tools
ANSI B212.12-1991 车刀.通用可转位刀片 Turning Tools - Commonly Used Indexable Inserts Revision and Redesignation of ANSI B94.25-1982; This is Now Copyrighted by CCPA
ANSI/ASME B94.55M-1985 单刃车刀的寿命试验 Tool Life Testing with Single-Point Turning Tools
ANSI B212.13-1979 单刃旋转车刀夹型切削工具 Roller Turner Type Cutting Tools, Single Point
ANSI B212.14-2002 销锁扣型固定器用带转位刀片的硬质合金座 Carbide Seats Used with Indexable Inserts for Pin Lock-Type Holders
ANSI B212.16-2000 切削工具.硬质合金圆头锉坯料 Cutting Tools - Blanks for Carbide Burs This is Now Copyrighted by CCPA
ANSI B212.19-1996 切削刀具.与可转位刀片和其它载体连接的超硬质切削表面的标识系统 Cutting Tools - Designation System for Extra Hard Cutting Surfaces, Bonded to Indexable Inserts and Other Carriers This is Now Copyrighted by CCPA
ANSI B212.4-2002 切削工具.可转位刀片.识别 Cutting Tools - Indexable Inserts - Identification
ANSI B212.8-2002 切削工具.麻花钻、铰刀、端铣刀和任选钻杆用硬质合金坯料 Cutting Tools - Carbide Blanks for Twist Drills, Reamers, End Mills, and Random Rod
ANSI/ASTM D6287-1998 切削薄膜和薄板试验样品惯例 Practice for Cutting Film and Sheeting Test Specimens
ANSI/ISO 513-2005 带确定切割边缘的金属切削用硬质切削材料的分类和应用.主要类别和应用类别的名称与符号 Classification and application of hard cutting materials for metal removal with defined cuttting edges - Designation of the main groups and groups of application
ANSI B212.11-1988 切削工具.可转位镶嵌刀片刀柄(英制系列).标识 Cutting Tools - Indexable Insert Shank- Type Milling Cutters (Inch Series) - Designation This is Now Copyrighted by CCPA
ANSI B212.17-1995 切削工具.镗头式铣刀(英制系列).定义 Cutting Tools - Bore-Type Milling Cutters (Inch Series) - Designation This is Now Copyrighted by CCPA
ANSI B212.2-1984 切削工具.夹紧型刀柄夹持器用的带可转位镶嵌刀片的硬质合金刀座 Cutting Tools - Carbide Seats Used with Indexable Inserts for Clamp-Type Holders This Is Now Copyrighted by CCPA
ANSI B94.47M-1980 夹紧式刀具夹持器用的与可转位刀片一起使用的硬质合金断屑器 Carbide chip breakers used with indexable inserts for clamp type holders
ANSI B11.24-2001 转印机的安全要求 Safety Requirements for Transfer Machines
ANSI B11.10-2003 金属锯床的制造、维护和使用的安全要求 Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of
ANSI/ASME B94.54-1999 孔锯、孔锯心轴和孔锯附件规范 Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories
ANSI B11.9-1975 机床.磨床的制造、维护和使用的安全要求 Safety Requirements for the Construction, Care and Use of Grinding Machines
ANSI B5.32.1-1977 立轴往复台式平面磨床 Grinding Machines, Surface, Reciprocating Table - Vertical Spindle
ANSI B5.32-1977 往复台式平面磨床的名称与牌号及加工范围 Surface Grinding Machines of the Reciprocating Table Type, Designation and Working Ranges of
ANSI B5.33-1981 外部圆柱形的削磨机.非中轴式 External Cylindrical Grinding Machines - Plain
ANSI B5.37-1970 无心外圆磨床 External Cylindrical Grinding Machines - Centerless
ANSI B5.42-1981 万能外圆磨床 External Cylindrical Grinding Machines - Universal
ANSI/ASME B5.35-1983 砂轮和碟形砂轮机安装规范 Machine Mounting Specifications for Abrasive Discs and Plate Mounted Wheels
ANSI/ASME B94.6-1984 滚花 Knurling
ANSI/UL 745-2-32-2006 磁性钻压床的安全标准.特殊要求 Standard for Safety for Particular Requirements for Magnetic Drill Presses
ANSI B11.8-2001 机床.带或不带自动控制的手动铣床、钻床和镗床用安全要求 Machine Tools - Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control
ANSI B11.11-2001 机床.齿轮和花键切割机的安全要求 Machine Tools - Safety Requirements for Gear and Spline Cutting Machines
ANSI B5.45-1972 铣床 Milling Machines
ANSI B5.47-1972 铣床刀杆部件 Milling Machine Arbor Assemblies
ANSI/ASME B5.18-1972 铣床用主轴端和刀柄 Spindle Noses and Tool Shanks for Milling Machines
ANSI/ASME B5.47-1972 铣床刀杆组件 Milling Machine Arbor Assemblies
ANSI/ISO 5609-2004 可转位刀片用镗杆.尺寸 Boring bars for indexable inserts - Dimensions
ANSI B11.6-2001 机床.带或不带自动控制的手动旋转车床用安全要求 Safety Requirements for Manual Turning Machines with or without Automatic Control Now Copyrighted by AMT
ANSI B212.20-1980 使用夹持型夹具的带可转位刀片的碳化物切片器 Carbide Chip Breakers Used with Indexable Inserts for Clamp Type Holders
ANSI B5.16-1952 普通车床和工具车间车床的精度 Accuracy of Engine and Tool Room Lathes
ANSI B5.9-1967 工具车间车床、普通车床、转塔车床和自动车床用轴头 Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes
ANSI B94.3-1965 车床和螺旋机械的直的切削片 Straight Cut-Off Blades for Lathes and Screw Machines
ANSI/ASME B5.57-1998 计算机数控车床和切削中心的性能评价方法 Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers
ANSI/ASME B5.9-1967 工具车床、普通车床、六角车床和自动车床的轴头 Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes
ANSI B5.46-1972 机床指示板用符号 Machine Tool Indicator Plates, Symbols for
ANSI B11.13-1992 机床.使用激光处理材料的机床的安全要求 Machine Tools - Single- and Multiple-Spindle Automatic Bar and Chucking Machines - Safety Requirements for Construction, Care, and Use Now Copyrighted by AMT
ANSI B11.19-2003 被其他B11机床安全标准参考时安全保护的设计、制造、保养和操作的性能标准 Performance Criteria for the Design, Construction, Care, and Operation of Safeguarding When Referenced by the Other B11 Machine Tool Safety Standards
ANSI B11.20-2004 机床.生产系统/元件.制造、维护和使用的安全要求 Machine Tools - Manufacturing Systems/Cells - Safety Requirements for Construction, Care, and Use
ANSI B11.21-2006 机床.用激光加工材料的机床的安全性要求 Machine Tools - Safety Requirements for Machine Tools Using Lasers for Processing Materials
ANSI B11.22-2001 旋转中心和自动数控旋转机器的安全要求 Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines
ANSI B11.23-2001 组合加工中心机床和自动数控铣床、钻床和镗床的安全要求 Safety Requirements for Machining Centers and Automatic Numerically Controlled Milling, Drilling and Boring Machines
ANSI/ASME B5.51M-1979 机床用优先选用的SI单位 Preferred Sl Units for Machine Tools
ANSI/UL 987-2007 固定式电动工具的安全标准 Standard for Safety for Stationary and Fixed Electric Tools
ANSI B5.40-1977 卧式镗床用轴头与刀具柄 Spindle Noses and Tool Shanks for Horizontal Boring Machines
ANSI/ASME B5.40-1977 卧式镗床轴头和刀柄 Spindle Noses and Tool Shanks for Horizontal Boring Machines
ANSI B212.10-2000 切削工具.精密可转位刀片夹头.A型 Cutting Tools - Precision Indexable Insert Cartridges This is Now Copyrighted by CCPA
ANSI B212.18-2002 带有转位刀片的英制钻杆.标示和尺寸 for Inch Boring Bars for Indexable Inserts Designation and Dimensions This is Now Copyrighted by CCPA
ANSI B212.3-2002 切削工具.可转位刀片的精密刀架 Cutting Tools - Precision Holders for Indexable Inserts
ANSI B212.5-2002 可转位刀片的米制刀架 Cutting Tools - Metric Holders for Indexable Inserts This is Now Copyrighted by CCPA
ANSI B5.8-1972 卡盘和卡盘爪 Chucks and Chuck Jaws
ANSI B94.35-1972 演练司机-分裂长袖， c ollet型 Drill Drivers - Split-Sleeve, Collet-Type
ANSI/ASME B4.1-1967 圆柱形部件用优选限值和配合 Preferred limits and fits for cylindrical parts
ANSI/ASME B5.50-1994 带有工具自动转位装置加工中心的V形凸缘刀柄 V Flange Tool Shanks for Machining Centers with Automatic Tool Changers
ANSI/ASME B5.60-2002 工件夹持夹盘.爪式夹盘 Workholding Chucks - Jaw Type Chucks
ANSI/ASME B5.60a-2005 工件夹具.爪式夹具(附录) Workholding Chucks - Jaw Type Chucks (Addenda)
ANSI/ASME B5.8-2001 夹头和夹头爪 Chucks and Chuck Jaws
ANSI/ASME B94.16.1-1978 基本球锁紧轻型和重型冲头和凹模镶环固定板(米制) Retainers, Basic Ball - Lock Punch and Die Button, Light and Heavy Duty (Metric)
ANSI/ASME B94.17.1-1977 量规(功能).球锁紧冲头、凹模镶环和固定板(米制) Gages (Functional), Ball - Lock Punches, Die Buttons and Retainers (Metric)
ANSI/ASME B94.33.1-1997 米制钻套 Metric Jig Bushings
ANSI/ASME B94.33-1996 钻套 Jig Bushings
ANSI/ASME B94.35-1972 钻孔驱动设备.有缝夹套型对开式套筒 Drill Drivers - Split-Sleeve, Collet-Type
ANSI B5.43-1977 组合机床标准 Modular Machine Tool Standards
ANSI B5.43M-1979 组合机床标准(米制) Modular Machine Tool Standard (Metric)
ANSI B5.48-1977 滚珠丝杠 Ball Screws
ANSI B5.5-1959 转动气缸和转接器 Rotating Air Cylinders and Adapters
ANSI/ASME B5.1M-1985 T型槽.T型槽螺栓、螺母和榫舌 T-Slots - Their Bolts, Nuts, and Tongues
ANSI/ASME B5.48-1977 滚珠丝杠 Ball Screws
ANSI B4.1-1967 圆柱型部件的优选极限与配合 Preferred limits and fits for cylindrical parts
ANSI/ISA S50.02 Part 3-1997 工业控制系统用现场总线标准.第3部分:数据链接服务定义 Fieldbus Standard for Use in Industrial Control Systems, Part 3: Data Link Service Definition
ANSI/ISA S50.02 Part 4-1997 工业控制系统用现场总线标准.第4部分:数据链接协议规范 Fieldbus Standard for use in Industrial Control Systems Part 4: Data Link Protocol Specification
ANSI/ISA 77.44.01-2007 化石燃料厂蒸汽温度控制系统.圆通型 Fossil Fuel Plant Steam Temperature Control System - Drum Type
ANSI/ISA S77.43.01-1994 化石燃料动力厂:单元/设备的需求发展(鼓型) Fossil Fuel Power Plant: Unit/Plant Demand Development (Drum Type)
ANSI/ISA S77.43-1994 矿物燃料发电厂:单位/自用量的研究（鼓型） Fossil Fuel Power Plant: Unit/Plant Demand Development (Drum Type)
ANSI/ISA 75.08.01-2002 整体式带凸缘的球型(类型125、150、250、300和600)控制阀体的端面间尺寸 Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
ANSI/ISA 75.08.05-2002 端面对焊球型(类型150、300、600、900、1500和2500)控制阀的端面间尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.06-2002 带凸缘的球型(类型900、1500和2500)控制阀体的面对面尺寸 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
ANSI/ISA S75.08-1985 法兰夹具或夹紧阀的安装面与面间尺寸 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/ISA 75.11.01-1985 控制阀的固有流量特征和可调范围 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA S75.02-1996 控制阀容量测试程序 Control Valve Capacity Test Procedures
ANSI/ISA S75.04-1995 无法兰控制阀端间尺寸(ANSI 150,300和600级) Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
ANSI/ISA S75.19.01-2001 控制阀静水压试验 Hydrostatic Testing of Control Valves
ANSI/ISA S82.01-1994 电气和电子试验、测量、控制和有关的设备.一般要求 Electric and Electronic Test, Measuring, Controlling, and Related Equipment: General Requirements
ANSI/ASAE S396.2-1991 联合收获机容量和性能试验程序 Combine Capacity and Performance Test Procedure
ANSI/ASTM E2281-2008 实践过程和测量能力指数 Practice for Process and Measurement Capability Indices
ANSI/IPC 9191-1999 实现统计过程控制(SPC)的一般要求 General Requirements for Implementation of Statistical Process Control
ANSI/ISA 50.00.01-1975 电子工业加工仪器用模拟信号的兼容性 Compatibility of Analog Signals for Electronic Industrial Process Instruments
ANSI/ISA 75.08.07-2001 可分离的凸缘球型控制阀的端面间尺寸(类型150、300和600) Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.13.01-2007 带模拟输入信号和气动输出的远程位置调节器性能评定方法 Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output
ANSI/ISA 84.00.01Part 1 (IEC 61511-1 Mod)-2004 功能安全.加工工业部门的安全仪表化系统.第1部分:框架、定义、系统、硬件和软件要求 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements.
ANSI/ISA 84.00.01Part 1-2004 功能安全.加工工业部门的安全仪表测量系统.第1部分:框架、定义、系统、硬件和软件要求 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements.
ANSI/ISA 84.00.01Part 2 (IEC 61511-2 Mod)-2004 功能安全.加工工业部门用安全仪表化系统.第2部分:应用指南.信息化 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application - Informative
ANSI/ISA 84.00.01Part 2-2004 功能安全.加工工业部门的安全仪表测量系统.第2部分:应用指南.信息 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application - Informative
ANSI/ISA 95.00.02-2001 企业控制系统一体化.第2部分:对象模型属性 Enterprise-Control System Integration - Part 2: Object Model Attributes
ANSI/ISA 95.00.03-2005 企业控制系统集成.第3部分:制造操作管理的活动模型 Enterprise-Control System Integration Part 3: Activity Models of Manufacturing Operations Management
ANSI/ISA S50.1-1975 电子工业加工仪器用模拟信号的兼容性 Compatibility of Analog Signals for Electronic Industrial Process Instruments
ANSI/ISA S75.08.07-2001 独立法兰球状控制阀的面到面尺寸 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/NEMA IA2.2-1993 可编程控制器.第2部分:设备要求 Programmable Controllers - Part 2: Equipment Requirements
ANSI/AWS D16.1M/D 16-2004 机器人电弧焊接安全规范 Specification for Robotic Arc Welding Safety
ANSI/AWS D16.3-2001 机器人电弧焊风险评估导则 Risk Assessment Guide for Robotic Welding
ANSI/AWS D16.4M/D 16.4-2005 机器人电弧焊资格鉴定规范 Specification for the Qualification of Robotic Arc Welding Personnel
ANSI/ASME B89.4.22-2004 铰接臂坐标测量机械的性能评价方法 Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines
ANSI/RIA R15.05-1-1990 工业机器人和自动控制系统的点对点和静态工作特性评价 Evaluation of Point-to-Point and Static Performance Characteristics of Industrial Robots and Robot Systems
ANSI/RIA R15.05-2-1992 工业机器人和自动控制系统.与路径相关的和动态工作特性.评价 Industrial Robots and Robot Systems - Path-Related and Dynamic Performance Characteristics - Evaluation
ANSI/RIA R15.05-3-1992 工业机器人和自动控制系统.可靠性验收试验.指南 Industrial Robots and Robot Systems - Reliability Acceptance Testing - Guidelines
ANSI/RIA R15.06-1999 工业用机器人和机器人系统.安全性要求 Industrial Robots and Robot Systems - Safety Requirements
ANSI/RIA/ISO 10218-1-2007 工业环境机器人.安全要求.第1部分:机器人 Robots for industrial environments - Safety requirements - Part 1: Robot
ANSI/UL 1740-2007 机器人和自动化设备的安全标准 Standard for Safety Robots and Robotic Equipment
ANSI/EIA 227-A-1978 1英寸穿孔带 One-Inch Perforated Tape
ANSI/EIA 358-C-1992 数控机床穿孔带用信息交换用美国标准代码子集 Subset of American National Standard Code for Information Interchange for Numerical Machine Control Perforated Tape
ANSI/EIA 494-B-1992 用于NCM的32位二进制CL(BCL)和7位ASCⅡCL(ACL)的输入格式 32-Bit Binary CL (BCL) and 7-Bit ASCII CL (ACL) Input Format for NCM
ANSI/EIA 267-C-1990 数控机床的轴和运动的术语 Axis and Motion Nomenclature for Numerically Controlled Machines
ANSI/EIA 274-D-1980 定位、仿形、仿形/定位的数控机床用可互换的可变程序块数据格式 Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines
ANSI/EIA 431-1992 数控设备和机床间的电气接口 Electrical Interface Between Numerical Control and Machine Tools
ANSI/ASME B5.54-2005 计算机数控加工中心机床的性能评估方法 Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers
ANSI/UL 1450-2007 电动空气压缩机、真空泵和涂漆设备的安全标准 Standard for Safety for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment
ANSI/ASTM F2105-2001 测定真空除尘器马达/风扇系统空气特性的试验方法 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ANSI/ARI 1060-2001 空气对空气能量回收通风热交换器额定值的确定 Rating Air-to-Air Energy Recovery Ventilation Heat Exchangers
ANSI/ASME PTC10-1998 性能测试规范.压缩机及排气机 Performance Test Code - Compressors and Exhausters
ANSI/SAE J517-1998 液压软管 Hydraulic Hose
ANSI/CAGI ADF100-1998 气动压缩空气干燥剂的评定和试验方法 Pneumatic Fluid Power - Compressed Air Dryers - Methods for Rating and Testing
ANSI/SAE J2333-1998 船舶系统和设备液压系统.油滤选用参数 Ship Systems and Equipment Hydraulic Systems - Filter Selection Parameters
ANSI/SAE J516-1997 液压软管配件 Hydraulic Hose Fittings
ANSI B93.46-1978 过滤器元件、可清洁表面型液压传动孔大小的测定方法 Filter Element, Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power
ANSI B93.54M-1981 液压传动.组装系统.实现辗轧洁净度的方法 Hydraulic Fluid Power - Assembled Systems - Method for Achieving Roll-off Cleanliness
ANSI B93.62M-1982 液压传动.线性执行器中往复式动力密封设备.泄漏的试验、测量和报告方法 Hydraulic fluid power - Reciprocating dynamic sealing devices in linear actuators - Method of testing, measuring and reporting leakage
ANSI/(NFPA) T2.24.2-2007 液压传动系统.防止外泄漏方法 Hydraulic fluid power systems - Methods for preventing external leakage
ANSI/(NFPA) T3.19.25 R1-2004 信息报告.液压系统.密封装置.弹性密封件和隔离装置的存储、搬运和安装 Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices
ANSI/CAGI ADF400-1999 凝聚分离器的试验和定级 Testing and Rating Coalescing Filters
ANSI B93.112M-1988 液压气动阀内部漏泄特性的测定方法 Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
ANSI B93.77M-1987 液压气动缸传动安装阀安装表面的标准尺寸 Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
ANSI/(NFPA) T3.5.29 R1-2007 液压传动电磁线圈控制的工业阀门.电连接器接口尺寸 Hydraulic fluid power solenoid-piloted industrial valves - Interface dimensions for electrical connectors
ANSI/SAE J1644-1998 液力和一般用途金属管联结件.螺纹式液压传动联结件的试验方法 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
ANSI/SAE J514-1998 液压管件 Hydraulic Tube Fittings
ANSI/SAE J518-1993 四螺栓拼合法兰型液压法兰管、管道及软管接头 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
ANSI/SMACNA 006-2006 HVAC管道结构标准.金属柔性.3版 HVAC Duct Construction Standards - Metal and Flexible, 3rd Edition
ANSI B93.3-1984 汽缸孔和活塞杆直径.英制系列 Cylinder Bore and Piston Rod Diameters - Inch Series
ANSI B93.36M-1973 浮动式金属和非金属流体动力活塞环的凹槽尺寸 Groove Dimensions for Floating Type Metallic and Non-Metallic Fluid Power Piston Rings
ANSI B93.76-1988 液压气动缸.往复运动用活塞和活塞杆密封腔的尺寸和公差 Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
ANSI B93.8-1968 表列方头工业流体动力气缸的孔和杆尺寸组合及杆端头外形 Bore and Rod Size Combinations and Rod End Configurations for Cataloged Square Head Industrial Fluid Power Cylinders
ANSI/(NFPA) T3.6.8 R-2007 流体动力系统.缸.编目的方头工业型附件尺寸 Fluid power systems - Cylinders - Dimensions for accessories for catalogued square head industrial types
ANSI/AWWA C541-2008 液压与气动缸和叶片式致动器为阀门和幻灯片盖茨 Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点