畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/NFPA T3.6.59-1993 液压传动.缸.缓冲性能 Hydraulic Fluid Power - Cylinders - Cushion Performance
ANSI/API RP-11S1-1998 电潜水泵拆卸报告 Electrical Submersible Pump Teardown Report
ANSI B93.95M-1987 液压气动用容积式泵、马达、整体传输.稳态性能的测量 Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
ANSI B93.98M-1987 液压用旋转轴凸缘密封圈的公称尺寸和公差 Fluid Power - Rotary Shaft Lip Type Seals - Nominal Dimensions and Tolerances
ANSI/HI 11.6-2001 潜水泵测试 Submersible Pump Tests
ANSI/SAE J1371-1993 液压挖掘机摆动的最低性能和评定程序 Hydraulic Excavator Swing Minimum Performance and Rating Procedure
ANSI (NFPA)T 2.25.1 R 2-2005 气压传动.工业机械的系统标准.对ISO 4414-1998的补充.气压传动.与系统相关的一般规则 Pneumatic Fluid Power - Systems Standard For Industrial Machinery - Supplement To ISO 4414:1998 - Pneumatic Fluid Power - General Rules Relating To Systems
ANSI B93.35-1978 液动专用装置的空腔尺寸(英制) Fluid Power Exclusion Devices (Inch Series), Cavity Dimensions for
ANSI B93.35M-1978 液压传动故障排除设备的空腔尺寸(英制系列) Cavity dimensions for fluid power exclusion devices (inch series)
ANSI FPSCS 1-R 2-2001 流体动力和移动控制.流体动力机械师、技术员、专家和工程师的认证 Fluid Power and Motion Control - Certification of Fluid Power Mechanics, Technicians, Specialists, and Engineers
ANSI/(NFPA) T2.12.10-2002 推荐实施规程.液压传动.系统和产品.检验一般测量原则和公差 Recommended practice - Hydraulic fluid power - Systems and products - Testing general measurement principles and tolerances (to be used in conjunction with ANSI/(NFPA)T2.12.1)
ANSI/(NFPA) T2.12.1-2002 液压传动.系统和产品.测量平均稳态压力的方法 Hydraulic fluid power - Systems and products - Method of measuring average steady-state pressure (to be used in conjunction with ANSI/(NFPA)T2.12.10)
ANSI/(NFPA) T2.12.5 R1-2005 信息报道.流体传动.实验室指南 Information report - Fluid power - Laboratory guidelines
ANSI/(NFPA) T2.24.1 R1-2007 液压传动.固定工业机械用系统标准.ISO 4413-1998补充件.液压传动.与系统相关的一般规则 Hydraulic fluid power - Systems standard for stationary industrial machinery - Supplement to ISO 4413:1998 - Hydraulic fluid power - General rules relating to systems
ANSI/ASTM D4174-1989 石油液压系统的清洁、冲洗和净化惯例 Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02)
ANSI/FPS/CS 1-R2-2001 液压传动监控.液压传动机械师、技术人员、专家和工程师的资格证书 Fluid Power and Motion Control - Certification of Fluid Power Mechanics, Technicians, Specialists, and Engineers
ANSI/API 610-2002 一般精炼设备用离心泵 Centrifugal Pumps for General Refinery Services
ANSI/ASME B73.5M-1995 化工用热塑性和热固性聚合材料卧式端吸离心泵规范 Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process
ANSI/HI 1.4-2000 离心泵.命名、定义、应用和操作 Centrifugal Pumps - Nomenclature, Definitions, Application and Operation
ANSI/HI 2.1-2.2-2000 立式泵的命名和定义 Vertical Pumps for Nomenclature and Definitions
ANSI/HI 2.3-2000 立式泵的设计和应用 Vertical Pumps for Design and Application
ANSI/AWWA C512-2007 给水装置用放气阀、空气/真空和混合空气阀 Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service
ANSI/ISA 75.08-1999 安装好的凸缘夹具或夹紧阀的端面间尺寸 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/API 14A-2005 井下安全阀设备的规范 Specification for Subsurface Safety Valve Equipment
ANSI/ASTM F2324-2003 预清洗喷雾阀的试验方法 Test Method for Pre-rinse Spray Valves
ANSI/FCI 99-3-2007 背压调节器容量 Back Pressure Regulator Capacity
ANSI/ISA 75.08.03-2001 承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150、300、600、900、1500和2500) Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA S75.08.03-2001 承插焊接端头和螺旋端头球状控制阀的面到面尺寸 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/API 621-2001 金属闸阀、球阀和止回阀的重新调整 Reconditioning of Metallic Gate, Globe, and Check Valves
ANSI/ASSE 1013-2005 减压法防回流装置和减压防火法防回流装置的性能要求 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers
ANSI/ASSE 1024-2004 双重止回阀型防回流装置 Dual Check Valve Type Backflow Preventers
ANSI/ASSE 1035-2002 实验室旋塞防回流装置 Laboratory Faucet Backflow Preventer
ANSI/ASSE 1047-2005 减压检测器组合防回流装置 Reduced Pressure Detector Assembly Backflow Preventer
ANSI/ASSE 1048-2005 双重检验检测器组合防回流装置 Double Check Detector Assembly Backflow Preventor
ANSI/ASSE 1052-2004 软管连接防回流装置的性能要求 Performance Requirements for Hose Connection Backflow Preventers
ANSI/ASSE 1064-2006 防回流组装件的现场试验成套器具的性能要求 Performance Requirements for Backflow Prevention Assembly Field Test Kits
ANSI/AWWA C518-2008 双光碟摆止回阀给水厂服务 Dual-Disc Swing-Check Valves for Waterworks Service
ANSI/ASTM F1370-1992 舰船用水系统减压阀的规范 Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ANSI/ISA 75.01.01-2007 确定控制阀尺寸用流体运动方程式 Flow Equations for Sizing Control Valves
ANSI/ISA 75.08.04-2007 对焊端球型控制阀的端面间尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA 75.08.08-1999 法兰球型角度控制阀体的端面至中心尺寸 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA 75.19.01-2007 控制阀水压试验 Hydrostatic Testing of Control Valves
ANSI/ISA 75.22-1999 凸缘球型角度控制阀身的端面至中心间尺寸 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA S75.11-1985 控制阀内在流量特性和幅度变化量 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA S75.14-1984 对焊端球型控制阀端间尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI Z21.15-1997 设备、设备连接阀和软管终端阀的手动煤气阀(同CGA9.1) Manually Operated Gas Valves For Appliances, Appliance Connetor Valves, and Hose End Valves (same as CGA 9.1)
ANSI Z21.15b-2006 煤气设备、设备连接阀和软管端部阀的手动操作煤气阀 Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CSA 9.1b)
ANSI Z21.18-2007 燃气器具压力调节器(与CSA 6.3相同) Gas Appliance Pressure Regulators (same as CSA 6.3)
ANSI Z21.21-2005 燃气器具用自动阀 Automatic Valves for Gas Appliances (same as CSA 6.5)
ANSI Z21.21b-2004 燃气器具用自动阀 Automatic Valves for Gas Appliances (same as CSA 6.5b)
ANSI Z21.80-2002 线性压力调节器(同CSA 6.22) Line Pressure Regulators (same as CSA 6.22)
ANSI Z21.80a-2005 管路压力调节器 Line Pressure Regulators (Same as CSA 6.22a)
ANSI/ARI 770-1994 制冷压力调节阀 Refrigerant Pressure Regulating Valves
ANSI/ASHRAE 158.2P-2006 制冷剂压力调节器试验功能方法 Methods of Testing Capacity of Refrigerant Pressure Regulators
ANSI/ASME B40.100-2005 压力计和压力计附件 Pressure Gauges and Gauge Attachments
ANSI/ASSE 1062-2006 独立供应配件用温度启动、流量减小阀的特殊要求 Performance Requirements for Temperature Actuated, Flow Reduction Valves for Individual Supply Fittings
ANSI/ASTM E1008-1997 地热和其他高温压力设备用阀身压力释放装置的装配、检测和维护惯例 Practice for Installation, Inspection, and Maintenance of Value Body Pressure Relief Methods for Geothermal and Other High-Temperature Applications
ANSI/ASTM F1565-2000 蒸汽供应减压阀规范 Specification for Pressure-Reducing Valves for Steam Service
ANSI/ASTM F1685-2000 空气或氮气系统减压歧管规范 Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
ANSI/ASTM F1795-2000 空气或氮气系统减压阀规范 Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ANSI/ASTM F2653-2007 与校准气瓶WK12714 F2653一起使用的彩弹阀门阳螺纹连接的规范 Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders WK12714 F2653
ANSI/FCI 79-1-2003 减压器压力额定值的验证 Proof of Pressure Ratings for Pressure Reducing Regulators
ANSI/FCI 99-2-2004 减压调节器能力 Pressure Reducing Regulator Capacity
ANSI/IAS NGV4.6-1999 天然气分装系统手动控制阀 Manually Operated Valves for Natural Gas Dispensing Systems
ANSI/IAS NGV4.7-1999 天然气分装系统用自动压力控制阀 Automatic Pressure-Operated Valves for Natural Gas Dispensing Systems
ANSI/ISA 75.08.09-2005 滑动杆无凸缘控制阀的端面间尺寸(类型150、300和600) Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/UL 125-2001 无水氨和液化气阀门的安全标准（安全阀除外） Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
ANSI/UL 132-2002 无水氨气和液化石油气的安全阀的安全标准 Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
ANSI/UL 144-2001 液化石油气压力调节阀的安全标准 Standard for Safety for Pressure-Regulating Valves for LP Gas
ANSI/UL 252-2003 压缩气体调节器 Compressed Gas Regulators
ANSI/UL 252A-2003 压缩气体调节器附件 Compressed Gas Regulator Accessories
ANSI/AWWA C504-2006 橡胶垫密封蝶阀 Rubber-Seated Butterfly Valves
ANSI/AWWA C509-2001 给水用弹性带座闸阀 Resilient-Seated Gate Valves for Water Supply Service
ANSI/AWWA C513-2005 明渠预制金属滑动闸门和明渠预制金属溢流堰闸门 Open-Channel, Fabricated-Metal Slide Gates and Open-Channel, Fabricated-Metal Weir Gates
ANSI/ASTM F885-1997 美国标准直管螺纹1/4至2英寸青铜球阀阀壳尺寸规范 Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ANSI/API 603-2001 150级,铸铁,耐腐蚀,法兰端闸阀 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
ANSI/API Std.600-2001 石油和天然气工业用螺栓接合钢制帽状阀门 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/API STD600-2001 石油和天然气工业用栓紧帽状钢门阀 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/ASTM F1098-1987 蝶阀-NPS 2 到 24包封尺寸的规范 Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24
ANSI/AWWA C515-2001 给水用小型堤的弹性带座闸阀 Reduced Wall, Resilient-Seated Gate Valves for Water Supply Service
ANSI/AWWA C561-2004 装配式不锈钢推拉门的AWWA标准 AWWA Standard for Fabricated Stainless Steel Slide Gates
ANSI/AWWA C563-2004 预制合成滑动门 Fabricated Composite Slide Gates
ANSI Z21.22a Addenda-1990 热水供给系统的安全阀和气体自动关闭装置.补充件 Relief valves and automatic gas shutoff devices for hot water supply systems; Addenda
ANSI/UL 1478-2004 消防水泵减压阀 Fire Pump Relief Valves
ANSI/API 608-2002 对焊和法兰端金属球阀 Metal Ball Valves - Flanged and Butt-Welding Ends
ANSI/AWWA C507-2005 从6英寸(150mm)到48英寸(1200mm)的球阀 Ball Valves 6 in (150 mm) through 48 in (1200 mm)
ANSI/AWWA C517-2005 弹性座式铸铁偏心塞阀 Resilient-Seated Cast Iron Eccentric Plug Valves
ANSI Z21.22-1999 热水供给系统用安全阀(与CSA 4.4-1998相同) Relief Valves for Hot Water Supply Systems (same as CSA 4.4-1998)
ANSI Z21.22a-1999 减压阀和真空截止阀 Pressure Relief Valves and Vacuum Relief Valves
ANSI Z21.22b-2001 热水供应系统用截止阀 Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)
ANSI Z21.87-2007 热水供应系统用自动燃气关闭装置 Automatic Gas Shutoff Devices for Hot Water Supply Systems (same as CSA 4.6)
ANSI/API 553-1999 炼油控制阀 Refinery Control Valve
ANSI/API 599-2002 金属塞阀.法兰和焊接端 Metal Plug Valves - Flanged and Welding Ends
ANSI/ASME A112.4.14-2004 卫生管道系统中使用的手动直角转弯截止阀 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
ANSI/ASME B16.10-2003 阀门的面对面及端对端尺寸 Face-to-Face and End-to-End Dimensions of Valves
ANSI/ASME B16.33-2002 125表压及以下的气体管道系统中使用的手动金属气体阀 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psi
ANSI/ASME B16.34-2004 阀门.带法兰、有螺纹和焊接端部 Valves - Flanged, Threaded and Welding End
ANSI/ASME B16.38-2007 气分配系统用大型金属阀 Large Metallic Valves for Gas Distribution
ANSI/ASME B16.40-2008 气体分配系统中手动热塑气体截流阀及阀门 Gas Shut-Offs and Valves in Gas Distribution Systems, Manually Operated Thermoplastic
ANSI/ASME B16.44-2002 压力不超过5psi的地上管道系统中用手工操作的金属气体阀门 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 psi
ANSI/ASTM F1794-1997 气体(除氧气)和液压系统手动球形阀门规范 Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
ANSI/ASTM F1802-2004 溢流阀性能试验的试验方法 Test Method for Performance Testing of Excess Flow Valves
ANSI/ASTM F1985-1999 气动球形控制阀规范 Specification for Pneumatic-Operated, Globe-Style, Control Valves
ANSI/ISA 75.08.02-2003 无凸缘的控制阀端面间的尺寸(级别150、300和600) Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/UL 1769-2006 储气瓶阀门标准 Standard for Cylinder Valves
ANSI/UL 842-1999 易燃液用阀门 Valves for Flammable Fluids
ANSI/API 6DSS-2007 海底管道阀用规范(第1版本) Specification on Subsea Pipeline Valves (1st Edition)
ANSI/API SPEC6D-2008 规格管道阀门 Specification for Pipeline Valves
ANSI/ARI 750-2001 制冷剂恒温膨胀阀 Thermostatic Refrigerant Expansion Valves
ANSI/ASHRAE 17-2008 温度调节用制冷膨胀阀的容量测试方法 Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves
ANSI/AWWA C508-2001 2in(50mm)-24in(600mm)NPS水厂设备摆动止回阀 Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS
ANSI/API SPEC6A-2004 井口和采油树设备的规范 Specification for Wellhead and Christmas Tree Equipment
ANSI/ASSE 1069-2005 自动温度控制混合阀门的性能要求 Performance Requirements for Automatic Temperature Control Mixing Valves
ANSI/ASTM F1387-1999 机械连接配件性能规范 Specification for the Performance of Mechanically Attached Fittings
ANSI/ASTM F1792-1997 气态氧供气阀门特殊要求规范 Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ANSI/ASTM F1793-1997 空气或氮气供应截流阀(亦称流量限制阀()规范 Specification for Automatic Shut-Off Valves (also known as Excess Flow Valves EFV) for Air or Nitrogen Service
ANSI/AWWA C530-2007 液压控制阀 Pilot Operated Control Valves
ANSI/IIAR 3-2005 氨制冷机阀门 Ammonia Refrigeration Valves
ANSI/ISA 75.25.01-2001 步进输入控制阀反应测量试验程序 Test Procedures for Control Valve Response Measurement from Step Inputs
ANSI/ISA 75.26.01-2006 控制阀门诊断数据获取和报告 Control Valve Diagnostic Data Acquisition and Reporting
ANSI/ISA S93.00.01-1999 手动和自动关闭阀门外泄露评估的标准方法 Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves
ANSI/ISA TR75.25.02-2000 阶式信号输入控制阀反应测量 Control Valve Response Measurement from Step Inputs
ANSI/ASTM F2330-2004 评价多层聚烯烃管耐氯化热水氧化性的试验方法 Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
ANSI/API SPEC17K-2005 粘合柔性管规范 Specification for Bonded Flexible Pipe
ANSI/ASSE 1011-2004 软管连接真空轧碎机 Hose Connection Vacuum Breakers
ANSI/ASSE 1020-2004 压力真空断路器组件 Pressure Vacuum Breakers Assembly
ANSI/ASTM F1282-2005 聚乙烯/铝/聚乙烯(PE-AL-PE)合成压力管规范 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ANSI/ASTM F2599-2006 以反向现场硫化内衬局部检修破坏管的实施规范 Practice for Sectional Repair of Damaged Pipe by Means of an Inverted Cured-in-place Liner
ANSI/FCI 69-1-1989 疏水阀的压力额定值标准 Pressure Rating Standard for Steam Traps
ANSI/FCI 70-3-2004 调节器座泄漏 Regulator Seat Leakage
ANSI/NACE RP0502-2003 管道外部腐蚀的直接评估方法 Pipeline External Corrosion Direct Assessment Methodology
ANSI/ASME B16.20-2007 管法兰用金属垫圈 Metallic Gaskets for Pipe Flanges
ANSI/ASME B16.21-2005 管法兰用非金属平垫圈 Nonmetallic Flat Gaskets For Pipe Flanges
ANSI/ASTM F2331-2004 测定热塑性螺纹管和配件材料的螺纹密封件的化学兼容性的试验方法 Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
ANSI/ASTM F477-2007 连接塑料管的弹性体密封件(垫圈)用规范 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ANSI/ASTM F493-2004 氯化聚氯乙烯(CPVC)塑料管及配件用溶剂粘结剂规范 Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
ANSI/ASTM F913-2002 连接塑料管用热塑弹性密封件(垫圈)规范 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ANSI/ISA 76.00.02-2002 表面安装流体分配元器件的模块化元器件接口.第1部分:合成橡胶密封件 Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals
ANSI Z21.54a Addenda-1992 便携式室外燃气器具的软管连接器.补充件 Gas hose connectors for portable outdoor gas-fired appliances; Addenda
ANSI/ASTM F2290-2003 医疗气体用ISO 5359低压软管组件的采用 Adoption of ISO 5359 Low-pressure Hose Assemblies for Use with Medical Gases
ANSI Z21.54-2002 便携式户外燃气器具用气体软管连接器(同 CSA 8.4) Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4)
ANSI Z21.54a-2005 便携式室外燃气器具用气体软管连接器(同CSA 8.4a) Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4a)
ANSI/ASAE S553-2001 伸缩式排放软管.规范和性能试验 Collapsible Emitting Hose (Drip Tape) - Specifications and Performance Testing
ANSI/ASTM E2226-2007 软管射流用实施规程 Practice for Application of Hose Stream
ANSI/ASTM F1347-1997 手动燃料软管卷盘规范 Specification for Manually Operated Fueling Hose Reels
ANSI/UL 21-2007 液化石油气软管的标准 Standard for LP-Gas Hose
ANSI/UL 569-2000 液化合油汽固定管道接口标准 Pigtails and Flexible Hose Connectors for LP-Gas
ANSI/AWWA C606-2006 开槽和肩接接点 Grooved and Shouldered Joints
ANSI/SAE J2044-1997 液体燃料和蒸气/喷射系统的快速连接头规范 Quick Connector Specification for Liquid Fuel and Vapor/Emissions Systems
ANSI/ASME PCC-1-2005 压力限制螺栓连接法兰联轴节组件的导则 Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ANSI/ASME B16.24-2006 铸铜合金管法兰和法兰配件:等级150、300、600、900、1500和2500 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500
ANSI/ASME B16.36-2006 孔板法兰 Orifice Flanges
ANSI/ASME B16.47-2006 大直径钢法兰.NPS 26～NPS 60 米制/英寸标准 Large Diameter Steel Flanges - NPS 26 Through NPS 60 Metric/Inch Standard
ANSI/ASME B16.5-2003 NPS 1/2至NPS 24 管法兰及法兰式管接件 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
ANSI/ASTM D3262-2006 纤维玻璃(玻璃纤维增强热固树脂)污水管规范 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/ASTM D4024-2000 增强热塑性树脂法兰规范(08.04) Specification for Reinforced Thermosetting Resin (Rtr) Flanges (08.04)
ANSI/ASTM D5421-2005 接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范 Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM F1076-1997 管用扩张焊接及银黄铜套管连接件惯例 Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
ANSI/ASTM F1120-1987 管道设备用环形金属波纹膨胀连接件的规范 Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ANSI/ASTM F1122-2004 快速拆卸式联轴节的规范 Specification for Quick Disconnect Couplings
ANSI/ASTM F1123-1987 非金属膨胀管连接件的规范 Specification for Non-Metallic Expansion Joints
ANSI/ASTM F1311-1997 大直径机加碳钢法兰规范 Specification for Large-Diameter Fabricated Carbon Steel Flanges
ANSI/ASTM F1429-1999 用柔性合成橡胶密封件固定在套桶中的塑料地下管道接头组合力试验方法 Test Method for Assembly Force of Plastic Underground Conduit Joints that Use Flexible Elastomeric Seals Located in the Bell
ANSI/ASTM F1476-2007 管道设施用装衬垫的机械连接器的性能规范 Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ANSI/ASTM F2014-2000 管道非增强挤制T形接头规范 Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ANSI/ASTM F2015-2000 搭接法兰管端规范 Specification for Lap Joint Flange Pipe End Applications
ANSI/AWWA C219-2006 平头管用栓接套筒型联接器 Bolted, Sleeve-Type Couplings for Plain-End Pipe
ANSI/IAS/AGA NGV1-2005 燃气车辆(NGV)燃烧连接设备 Natural Gas Vehicle (NGV) Fueling Connection Devices
ANSI/IAS/AGA NGV1a-2005 天然气车辆(NGV)加燃料连接件 Natural Gas Vehicle (NGV) Fueling Connection Devices
ANSI/UL 567-2004 石油产品和LP气用紧急断开装置、旋转连接器和管道连接配件 Emergency Breakaways Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas
ANSI/AWWA C400-2003 给水和其他液体用4英寸至16英寸石棉水泥输水管 Asbestos-Cement Distribution Pipe, 4 in through 16 in, for Water and Other Liquids
ANSI/ASAE S261.7-1996 非钢筋混凝土灌溉管系统的设计和安装 Design and Installation of Nonreinforced Concrete Irrigation Pipe Systems
ANSI/ASTM C662-2005 抗渗石墨管和螺纹的规范 Specification for Impervious Graphite Pipe and Threading
ANSI/ASTM F1735-2002 修复现有的人可进入的污水管道用PVC衬里的聚氯乙烯(PVC)异型带材规范 Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits
ANSI/ASTM F1336-2007 聚氯乙烯(PVC)衬垫装配的下水道配件用规范 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ANSI/ASTM F1986-2001 冷热饮用水系统用2型多层管压合配件和压合接头的规范 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-water Systems
ANSI/ASTM F1987-2001 循环加热系统用2型多层管、压合配件和压合接头的规范 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
ANSI/ASTM D3915-1999 聚氯乙烯(PVC)和有关塑料管及配件部件规范 Specification for Poly (Vinyl Chloride) (PVC) and Related Plastic Pipe and Fitting Compounds (08.04)
ANSI/ASTM F610/F 610M-2005 用热循环技术评价模塑聚氯乙烯(PVC)塑料管配件质量的试验方法 Test Method for Evaluating the Quality of Molded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
ANSI/ASTM D2466-2006 聚氯乙烯(PVC)塑料管道配件规范.表40 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
ANSI/ASTM D2467-2006 套管型聚氯乙烯(PVC)塑料管道配件规范.表80 Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM D2468-1996 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件规范,表 40 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
ANSI/ASTM D2609-2002 聚乙烯塑料管塑料插入接头规范 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ANSI/ASTM D2683-2004 限定外径的聚乙烯管用套节型聚乙烯配件规范 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ANSI/ASTM D3311a-2006 排水、废弃物和通风(DWV)塑料管配件样品规范 Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ANSI/ASTM D3840-2001 非承压增强塑料砂浆管配件规范(08.04) Specification for Reinforced Plastic Mortar Pipe Fittings for Non-Pressure Applications (08.04)
ANSI/ASTM D5685-2005 玻璃纤维规范.(玻璃纤维加固的热硬性树脂)加压管配件 Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ANSI/ASTM F1201-1988 0oF以上的管道设备中流体调节器配件的规范 Specification for Fluid Conditioner Fittings in Piping Applications Above 0oF
ANSI/ASTM F1733-2007 聚酰胺(PA)塑料管和管道用端面热熔接聚酰胺(PA)塑料配件的规范 Specification for Butt Heat Fusion Polyamide PA Plastic Fitting for Polyamide PA Plastic Pipe and Tubing
ANSI/ASTM F1865-2002 交联聚乙烯管(PEX)用带压力套管的机械冷膨胀插入式配件规范 Specification for Mechanical Cold Expansion Insert Fitting with Compression Sleeve for Crosslinked Polyethylene PEX Tubing
ANSI/ASTM F1866-2007 聚氯乙烯(PVC)塑料壁厚40排水管和DWV加工配件规范 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ANSI/ASTM F1924-2005 外径可控的聚乙烯供气管道用塑料机械配件规范 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ANSI/ASTM F1960a-2007 与交联聚乙烯(PEX)管一起使用的带过氧化物漂白的PEX增强环的冷膨胀管件的规范 Specification for Cold Expansion Fittings with Peroxide PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) Tubing
ANSI/ASTM F1970-2005 聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统专用工程配件、附件或阀门的规范 Specification for Special Engineered Fittings, Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly(Vinyl Chloride) (CPVC) Systems
ANSI/ASTM F2135-2001 模制排水、污物和通风的短型塑料配件规范 Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings
ANSI/ASTM F2145-2001 外径可控聚酰胺11管及管道系统用聚酰胺11(Pa11)机械配件规范(60-01-02) Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02)
ANSI/ASTM F2159-2005 SDR9交联聚乙烯(PEX)管道用带铜夹紧环固的嵌入式塑料配件规范 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing
ANSI/ASTM F2206-2002 熔缝聚乙烯塑料管、管配件、片材、板材或砧板材制造的配件规范 Specification for Fabricated Fittings of Butt-fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock or Block Stock
ANSI/ASTM F2261-2006 表:40～80插接式氯化聚氯乙烯（PVC）塑料管配件的标准规范 Test Method for Pressure Rating Poly(vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-type
ANSI/ASTM F2434-2005 SDR9交链聚乙烯(PEX)管和SDR9交链聚乙烯/铝/交链聚乙烯(PEX-PEX)管用卷制铜环的金属插件标准规范 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
ANSI/ASTM F2600-2006 控制外径的聚酰胺11管和管道的电熔融型聚酰胺-11配件的标准规范 Standard Specification Forelectrofusion Type Polyamide-11 Fittings for Outsidediameter Controlled Polyamide-11 Pipe and Tubing
ANSI/ASTM F437-2006 有螺纹的氯化聚氯乙烯(CPVC)塑料管配件规范.表80 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM F438-2004 套管型氯化聚氯乙烯(CPVC)塑料管配件规范.表40 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ANSI/ASTM F439-2006 氯化聚氯乙烯(CPVC)塑料管配件规范.表80 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM B366-2001 工厂锻压镍和镍合金配件规范 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ANSI/SAE J246-1994 球面及法兰式(压缩)套管管件 Spherical and Flanged Sleeve (Compression) Tube Fittings
ANSI/ASTM A182/A 182M-2001 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM A608-1991 高温承压设备用离心铸造铁铬镍高合金钢管规范 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ANSI/AWWA C222-1999 钢水管和配件聚氨基甲酸乙酯内或外涂层 Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
ANSI B16.18-2001 铸铜合金焊锡连接压力配件 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI/ASME B16.11-2005 锻制配件、承插焊接配件和螺纹 Forged Fittings, Socket-Welding and Threaded
ANSI/ASME B16.12-1998 铸铁螺纹排水配件 Cast Iron Threaded Drainage Fittings
ANSI/ASME B16.15-2006 125级和250级铸造青铜螺纹配件 Cast Bronze Threaded Fittings, Classes 125 and 250
ANSI/ASME B16.18-2001 铸铜合金软钎焊连接压力管件 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI/ASME B16.22-2001 锻铜和铜合金钎焊接压力连接件 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
ANSI/ASME B16.23-2002 DWV铸铜合金钎焊连接排水配件 Cast Copper Alloy Solder Joint Drainage Fittings: DWV
ANSI/ASME B16.25-2007 对接焊接端 Buttwelding Ends
ANSI/ASME B16.26-2006 青铜扩口管用铸铜合金配件 Cast Copper Alloy Fittings for Flared Copper Tubes
ANSI/ASME B16.29-2007 DWV型锻铜和锻铜合金钎焊排水配件 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV
ANSI/ASME B16.3-1998 可锻铁螺纹配件 Malleable-Iron Threaded Fittings
ANSI/ASME B16.4-2006 灰口铁螺纹配件 Gray Iron Threaded Fittings
ANSI/ASME B16.42-1998 球墨铸铁管法兰和法兰配件 Ductile Iron Pipe Flanges and Flanged Fittings
ANSI/ASME B16.45-1998 Soventr排水系统用铸铁管件 Cast Iron Fittings for Soventr Drainage Systems
ANSI/ASME B16.48-2005 钢衬毛坯 Steel Line Blanks
ANSI/ASME B16.49-2007 传输和分配系统用工厂预制的锻钢对焊感应管弯头 Factory-Made Wrought Steel Buttwelding Induction Bends for Transportation and Distribution Systems
ANSI/ASME B16.9-2007 工厂制锻钢对焊配件 Factory-Made Wrought Steel Buttwelding Fittings
ANSI/ASSE 1061-2006 可拆卸和不可拆卸的推入配合配件的性能要求 Performance Requirements for Removable and Non-removable Push-Fit Fittings
ANSI/ASTM A500-2001 圆钢与型钢的冷变形焊接与无缝碳素钢结构管规范 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ANSI/ASTM A789/A 789M-2001 普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ANSI/ASTM A815/A 815M-2001 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件规范 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ANSI/ASTM F1807a-2007 SDR9交联聚乙烯(PEX)管用利用卷制铜环的金属内插件的规范 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing
ANSI/ASTM F1948-2005 外部直径受控的热塑性气体配送管用金属机械配件规范 Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
ANSI/ASTM F1961-2002 交联聚乙烯(PEX)管用带盘簧的金属机械冷压扩口式管件规范 Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
ANSI/ASTM F1974-2004 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范 Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ANSI/ASTM F2080-2005 交联聚乙烯管用带金属压缩管套的冷扩张配件的规范(PEX管) Specification for Cold-expansion Fittings with Metal Compression-sleeves for Cross-linked Polyethylene (PEX Pipe)
ANSI/ASTM F2098-2004 保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的试验方法 Test Method for Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings
ANSI/ASTM F682-1982 锻制碳钢套管型管连接件规范 Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ANSI/ASTM F682a-1982 锻制碳素钢套管接头规范 Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ANSI/AWWA C116/A 21.16-2003 供水设备用球墨铸铁和灰铁配件的内外表面的防护熔融胶合环氧涂层 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service
ANSI/AWWA C226-2006 水务用尺寸0.5～72英寸(15～1800 mm)的不锈钢配件 Stainless Steel Fittings for Waterworks Service Sizes 1/2 In. Through 72 In. (15 mm Through 1800 mm)
ANSI/CSA LC4-2007 用于燃气配送系统的压接铜和铜合金配件 Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32)
ANSI/SAE J1231-1998 卷管的软管接头 Beaded Tube Hose Fittings
ANSI/SAE J512-1994 汽车管接头 Fittings, Automotive Tube
ANSI/SAE J530-1994 汽车管件接头 Automotive Pipe Fittings
ANSI/UL 109-2004 易燃和可燃液体、制冷辅助设备和船上用管件的安全标准 Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
ANSI/UL 407-2004 压缩气体用多支管的安全标准 Standard for Safety for Manifolds for Compressed Gases
ANSI/AWWA C605-2005 水处理.输水用聚氯乙烯PVC压力管及配件的地下安装 Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
ANSI/AWWA C900-2007 输水和配水用4英寸～12英寸(100mm～300mm)聚氯乙烯(PVC)压力管和装配配件 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings 4-Inch to 12-Inch (100 mm Through 300 mm) for Water Transmission and Distribution
ANSI/AWWA C901-2002 1/2到3英寸(13-76毫米)聚乙烯压力给水管 Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service
ANSI/AWWA C909-2002 给排水用4至12英寸(100至300mm)分子定向聚氯乙烯(PVCO)压力管 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 in. Through 12 in. (100 mm Through 300 mm), for Water Distribution
ANSI/ASTM F1504-2002 现有污水管和下水管修复用波纹聚氯乙烯管规范 Specification for Folded Poly (Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
ANSI/ASTM F1697-2007 现用下水道和导管的机械螺旋缠绕衬管修复用聚氯乙烯(PVC)异型带的规范 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
ANSI/ASTM F1698-2002 现有排污管和管道修复用聚氯乙烯管线衬里和水泥薄浆安装惯例 Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
ANSI/ASTM F1741-2007 现用下水道和导管修复用机械螺旋缠绕聚氯乙烯(PVC)衬管安装的实施规程 Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
ANSI/ASTM F1803-2005 基于受控内径的聚氯乙烯(PVC)封闭式异型重力管和配件的规范 Specification for Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ANSI/ASTM F1871-2002 现有排污管和管道修复用波纹状/形成聚氯乙烯管道形状规范 Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation
ANSI/ASTM F1947-2004 折叠式聚氯乙烯管(PVC)装进现有污水管和下水管道中的实施规程 Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
ANSI/ASAE S376.2-1998 地下热塑性塑料灌溉管道的设计、安装和性能 Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines
ANSI/NSF 14(i10)-2006 塑料管道系统组件和相关材料 Plastics Piping System Components and Related Materials
ANSI/NSF 14(i12r2)-2006 塑料管道系统部件和相关材料 Plastics Piping System Components and Related Materials
ANSI/NSF 14(i13)-2006 塑料管道系统部件及相关材料 Plastic Piping System Components and Related Materials
ANSI/NSF 14(i14)-2006 塑料管道系统部件和相关材料 Plastics Piping System Components and Related Materials
ANSI/NSF 14(i16)-2006 塑料管道系统部件及相关材料 Plastic Piping System Components and Related Materials
ANSI/NSF 14(i17)-2007 塑料管系统部件和相关材料 Plastic piping system components and related materials
ANSI/NSF 14(i20)-2007 塑料管道系统配件及其相关材料 Plastic piping system components and related materials
ANSI/ASTM D1599-1999 塑料管材、管道和管件短时液压故障压力试验方法 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ANSI/ASTM D2122-1996 热塑性管和配件尺寸测定的试验方法 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ANSI/ASTM D2444-1999 热塑管材和管件耐冲击性落锤试验方法 Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ANSI/ASTM D2513b-2007 热塑性燃气压力管、软管和配件的规范 Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
ANSI/ASTM D2517-2006 增塑环氧树脂气压管和配件规范 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
ANSI/ASTM D2564-2004 聚氯乙烯塑料管道系统用液状粘固剂规范 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
ANSI/ASTM D2729-2003 聚氯乙烯(PVC)污水管及管配件规范 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ANSI/ASTM D2852-1995 苯乙烯塑料排水管材和配件规范 Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
ANSI/ASTM D2992-2006 玻璃纤维(增强玻璃纤维的热固树脂)管和配件用获得静液压或压力设计基础的规范? Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ANSI/ASTM D3034-2006 PSM型聚氯乙烯排水管材和管件的规范 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ANSI/ASTM D3261-1997 聚乙烯塑料管材和管道用对接热融合聚乙烯塑料管件规范 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ANSI/ASTM D3350-2001 聚乙烯塑料管和配件材料规范 Specification for Polyethylene Plastics Pipe and Fitting Materials
ANSI/ASTM D3567-1997 玻璃纤维(玻璃纤维增强热固树脂)管和配件的尺寸测定用实施规程 Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ANSI/ASTM D3965-1999 管和配件用刚性丙烯腈-丁二烯-苯乙烯共聚物规范 Specification for Rigid Acrylonitrile Butadiene-Styrene (ABS) Compounds for Pipe and Fittings (08.03, 08.04)
ANSI/ASTM D5677-2005 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ANSI/ASTM D6041-1997 覥櫦匡?"纤维玻璃" (玻璃纤维增强热固性树脂)耐腐蚀管和配件规范 Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
ANSI/ASTM F1290-1999 电熔融连接聚烯烃管及配件标准规程 Practice for Electrofusion Joining Polyolefin Pipe and Fittings
ANSI/ASTM F1335-2004 高温设备用压力标定复合管规范 Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service
ANSI/ASTM F1380-1996 聚丁烯(PB)管用金属插入配件规范 Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ANSI/ASTM F2390-2006 具有后工业循环含量WK3886的聚氯乙烯塑料排水管、废弃物和通风孔管及配件的规范 Specification for Poly(vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post0industrial Recycle Content WK3886
ANSI/ASTM F2509-2006 外径可控的聚乙烯配气管和管道上用的现场组合Anoddeless升降机成套器具的规范 Specification for Field-assembled Anoddeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ANSI/ASTM F2620-2006 聚乙烯管及配件热熔连接的实施规范 Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
ANSI/ASTM F402-1999 热塑性管及配件接合用液状粘固剂、油漆腻子及清洁剂的安全操作的标准规程 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
ANSI/ASTM F405-2005 聚乙烯(PE)波纹管及管配件规范 Specification for Corrugated Polyethylene (PE) Pipe and Fittings
ANSI/ASTM F409-2002 可拆卸更换的热塑性塑料管及管道配件的规范 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ANSI/ASTM F512-1995 光滑壁聚氯乙烯(PVC)地下水管和配件规范 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
ANSI/ASTM F656-2002 聚氯乙烯塑料管和配件的溶剂胶结接口打底剂规范 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ANSI/ASTM F667-2006 大直径聚乙烯波纹管及配件规范 Specification for Large Diameter Corrugated Polyethylene Tubing and Fittings
ANSI/ASTM F725-1989 热塑性管道和配件标准中冲击试验要求起草规程 Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards
ANSI/ASTM F794-2003 基于受控内径的聚氯乙烯(PVC)异型重力沉降污水管及配件规范 Specification for Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ANSI/ASTM F949a-2006 光滑内壁聚氯乙烯(PVC)波纹污水管和配件规范 Specification for Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
ANSI/AWWA C905-1997 14in.-36in.(聚氯乙烯(PVC)压力输水管和成品配件 Polyvinyl Chloride (PVC) Water Transmission Pipe (Nominal Diameters 14-36 inches)
ANSI/ASTM D1527-2005 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管材范.表40和80 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
ANSI/ASTM D1598-1997 恒定内压下塑料管材的磨损试验方法 Test Method for Time-to-Failure of Plastic Pipe under Constant Internal Pressure
ANSI/ASTM D1785-2006 聚氯乙烯(PVC)塑料管的规范.表40、80和120 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
ANSI/ASTM D2104-2003 聚乙烯(PE)塑料管规范.表40 Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
ANSI/ASTM D2105-2001 玻璃纤维径向拉伸特性试验方法 Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ANSI/ASTM D2143-2000 增强热固塑料管循环压力强度试验方法(08.04) Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ANSI/ASTM D2239-2003 以受控内径为基准的聚乙烯(PE)塑料管(SIDR-PR)规范 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ANSI/ASTM D2241-2005 聚氯乙烯(PVC)额定压力管规范(SDR系列) Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ANSI/ASTM D2282-1999 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管(SDR-PR)规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
ANSI/ASTM D2310-2006 机制玻璃纤维(玻璃纤维增强热固树脂)管规范 Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D2321-2005 排污水和其它重力流动设备用热塑性管的地下安装实施规程 Practice for Underground Installation of Thermoplastic Pipe for Sewers and other Gravity-Flow Applications
ANSI/ASTM D2412-2002 测定由平行板加载的塑料管材外部负荷特征的试验方法 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ANSI/ASTM D2447-2003 以外径尺寸为基准的聚乙烯(PE)塑料管规范.表40和80 Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
ANSI/ASTM D2661-2006 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通风管和配件规范.表40 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ANSI/ASTM D2665-2007 聚氯乙烯(PVC)塑料排水管、废弃物、排风管和配件用规范 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ANSI/ASTM D2672-1996 用溶剂接合的聚氯乙烯管连接件规范 Specification for Joints for IPS PVC Pipe Using Solvent Cement
ANSI/ASTM D2672a-1996 使用溶解粘固剂的IPS PVC管用接头规范 Specification for Joints for IPS PVC Pipe Using Solvent Cement
ANSI/ASTM D2680-2001 ABS和PVC复合管道规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ANSI/ASTM D2737-2003 聚乙烯塑料管规范 Specification for Polyethylene (PE) Plastic Tubing
ANSI/ASTM D2751-2005 丙烯腈-丁二烯-苯乙烯共聚物(ABS)污水管及配件的规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
ANSI/ASTM D2774-2008 实践地下安装热塑性压力管道 Practice for Underground Installation of Thermoplastic Pressure Piping
ANSI/ASTM D2837-2004 获得热塑性管道材料静水压设计基数的试验方法 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ANSI/ASTM D2846/D 2846M-2006 氯化聚氯乙烯（CPVC）塑料冷热水分配系统标准规范 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
ANSI/ASTM D2924-2001 增强热固性树脂管耐外部压力试验(08.04) Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04)
ANSI/ASTM D2925-2001 全孔流情况下玻璃纤维(玻璃纤维增强热固树脂)束偏转测试方法 Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
ANSI/ASTM D2949-2000 外径3.25英寸的聚化乙烯塑料排水、排污管和配件规范 Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ANSI/ASTM D2996-2001 纤翴縠?"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范 Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
ANSI/ASTM D2997-2001 离心成形玻璃纤维(玻璃纤维增强热固树脂)管规范 Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D3035-2008 规格为聚乙烯（ PE ）塑料管技术（ DR -公关）的基础上控制外径 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ANSI/ASTM D3139-1996 苯乙烯橡胶塑料承压管和配件溶剂接合剂规范 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ANSI/ASTM D3212-2007 使用软质人造橡胶密封料制塑料排水管和污水管用接头的规范 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ANSI/ASTM D3295-2001 PTFE管规范 Specification for PTFE Tubing (08.03)
ANSI/ASTM D3296-1998 FEP碳氟化合物管规范(08.03) Specification for FEP-Fluorocarbon Tubing (08.03)
ANSI/ASTM D3309-1996 聚丁烯(PB)塑料热水配送系统规范 Specification for Polybutylene (PB) Plastic Hot-Water Distribution Systems
ANSI/ASTM D3517-2006 玻璃纤维增强热固性树脂压力管的规范 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ANSI/ASTM D3681-2006 在偏转条件下玻璃纤维(玻璃纤维增强热固树脂)管的耐化学腐蚀的试验方法 Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
ANSI/ASTM D3754-2006 玻璃纤维增强热固性树脂污水压力管和工业压力管的规范 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ANSI/ASTM D3839-2008 实践地下安装灵活，增强热固性树脂管和增强塑料砂浆管（ 08.04 ） Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04)
ANSI/ASTM D4396-1999 非承压管道(X-15-358)用硬质聚氯乙烯(PVC)和相关塑料化合物规范(08.04) Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04)
ANSI/ASTM D5365-2006 玻璃纤维(玻璃纤维增强热固树脂)管的长期环弯曲应力试验方法 Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D5813-2004 现场固化的热固性树脂污水管规范 Specification for Cured-in-place Thermosetting Resin Sewer Pipe
ANSI/ASTM F1041-1995 聚烯烃燃气压力管和配件挤压指南 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Fittings
ANSI/ASTM F1055-1996 控制外径的聚乙烯管和管路用电熔型聚乙烯配件规范 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
ANSI/ASTM F1056-2004 套管熔融连接聚乙烯管和配件用套管熔融工具规范 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
ANSI/ASTM F1057-2005 利用热循环技术评估压塑聚乙烯(PVC)管道质量的实施规程 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
ANSI/ASTM F1173-2001 船用热固树脂玻璃纤维管和配件规范 Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications
ANSI/ASTM F1216a-2007 树脂浸渍管的倒置和硫化条件下现有管线和管道修复的实施规程 Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
ANSI/ASTM F1281-2007 交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管规范 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ANSI/ASTM F1365-1991 采用柔性合成橡胶密封件的塑料地下管道接头耐水渗透性试验方法 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints which Use Flexible Elastomeric Seals
ANSI/ASTM F1412-2001 腐蚀性废物下水道系统用聚烯烃管和配件规范 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ANSI/ASTM F1473-2007 测量聚乙烯管和树脂抗裂纹缓慢增长的切口拉伸试验方法 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
ANSI/ASTM F1483-1999 定向聚氯乙烯(PVCO)压力管的标准规范 Specification for Oriented Poly (Vinyl Chloride), PVCO, Pressure Pipe
ANSI/ASTM F1488-2003 共挤压复合管的规范 Specification for Coextruded Composite Pipe
ANSI/ASTM F1498-2008 规格锥管螺纹60度;热塑性塑料管及配件 Specification for Taper Pipe Threads 60 Deg; for Thermoplastic Pipe and Fittings
ANSI/ASTM F1533-2001 变形的聚乙烯内衬规范 Specification for Deformed Polyethylene (PE) Liner
ANSI/ASTM F1563-2001 聚乙烯(PE)燃气管道挤压工具规范 Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
ANSI/ASTM F1588-1996 恒定拉伸载荷连接试验方法 Test Method for Constant Tensile Load Joint Test (CTLJT)
ANSI/ASTM F1668-1996 地下塑料管制造程序指南 Guide for Construction Procedures for Buried Plastic Pipe
ANSI/ASTM F1734-2003 为避免聚乙烯燃气管长期受损采用的管、挤压工具和挤压工序组合的合格鉴定实施规程 Practice for Qualification of a Combination of Squeeze Tool, Pipe and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
ANSI/ASTM F1743-1996 通过现场硫化热固性树脂管的现场拉入安装对已有管道进行修复的操作规程 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP)
ANSI/ASTM F1760-2001 含有再加工-再生材料的聚氯乙烯非承压塑料管规范 Specification for Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ANSI/ASTM F1804-1997 牵引装配时聚乙烯气管允许抗拉荷载测定惯例 Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
ANSI/ASTM F1962-1999 包括渡口在内的障碍物下安放聚乙烯管道时最大水平方向打眼指南 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
ANSI/ASTM F2019-2003 将玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)现场拖拉并安装进已有管道的操作规程 Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
ANSI/ASTM F2023a-2005 评价热氯水用交联聚乙烯(PEX)管和系统抗氧化性的试验方法 Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
ANSI/ASTM F2164-2002 采用液压法进行聚乙烯压力管道系统场漏试验的惯例 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ANSI/ASTM F2262-2005 OD可控的SDR9交联聚乙烯/铝/交联聚乙烯管的规范 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ANSI/ASTM F2263-2007 氯化水聚乙烯(PE)管的抗氧化性评估用试验方法 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
ANSI/ASTM F2307-2003 基于可控内径的10号系列的聚氯乙烯封闭式异型重力管和管配件规范(project *62-02-03) Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (project 62-02-03)
ANSI/ASTM F2389-2007 额定压力聚丙烯(PP)管道系统规范 Specification for Pressure-rated Polypropylene Pp Piping Systems
ANSI/ASTM F2435-2006 钢筋聚乙烯(PE)波纹管规范 Specification for Steel Reinforced Polyethylene Pe Corrugated Pipe
ANSI/ASTM F2619-2007 高密度聚乙烯(PE)管道规范 Specification for High-density Polyethylne (PE) Line Pipe
ANSI/ASTM F2623-2007 升温的聚乙烯(PE-RT)SDR 9管道的标准规范 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
ANSI/ASTM F2657-2008 交联聚乙烯(pex)管道户外风化的试验方法 Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (pex) Tubing
ANSI/ASTM F2658-2007 Psm型聚氯乙烯(PVC)Sdr 51和Sdr 64污水管及配件用规范 Specification for Type Psm Poly(vinyl Chloride) (PVC) Sdr 51 and Sdr 64 Sewer Pipe and Fittings
ANSI/ASTM F412-2007 塑料管道系统的相关术语 Terminology Relating to Plastic Piping Systems
ANSI/ASTM F441/F 441M-1999 氯化聚氯乙烯塑料管的规范.表40和80 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ANSI/ASTM F442/F 442M-1999 氯化聚氯乙烯塑料管的规范 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
ANSI/ASTM F449-2002 农业排水或地下水位控制用热塑塑料波纹管地下安装惯例 Practice for Subsurface Installation of Corrugated Thermoplastic Tubing for Agricultural Drainage or Water Table Control
ANSI/ASTM F480b-2006 按标准尺寸比例(SDR)制造的热塑性井套管及联接器标准规范(SCH40和SCH80) Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), (SCH 40 and SCH 80)
ANSI/ASTM F481-1996 化粪池沥滤场用热塑塑料管和波纹软管安装惯例 Practice for Installation of Thermoplastic Pipe and Corrugated Tubing in Septic Tank Leach Fields
ANSI/ASTM F585-1994 聚乙烯软管插入现有下水道的惯例 Practice for Insertion of Flexible Polyethylene Pipe into Existing Sewers
ANSI/ASTM F628-2006 带泡沫填充料的(ABS)40号塑料排污和通风管道规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
ANSI/ASTM F645-2004 热塑性水压管道系统的选定、设计和安装指南 Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems
ANSI/ASTM F679-2006 聚氯乙烯(PVC)大尺寸塑料重力污水管和配件的规范 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ANSI/ASTM F689-1997 测定内壁金属铸件塑料气压管道地面温度惯例 Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings
ANSI/ASTM F690-1996 热塑压力管道灌溉系统地下安装惯例 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
ANSI/ASTM F714-2008 规格为聚乙烯（ PE ）塑料管材（特别提款权-公关）的基础上外径 Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
ANSI/ASTM F758-1995 高速公路、机场和类似场所排水系统用光滑壁聚氯乙烯(PVC) 塑料管道系统规范 Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
ANSI/ASTM F771-2005 聚乙烯(PE)热塑性高压灌溉管道系统规范 Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
ANSI/ASTM F809/F 809M-2000 大直径聚丁烯塑料管规范 Specification for Large Diameter Polybutylene (PB) Plastic Pipe
ANSI/ASTM F810-2006 排水和废弃物处置吸收场用光壁聚乙烯(PE)管的规范 Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ANSI/ASTM F876-2007 交联聚乙烯管(PEX)规范 Specification for Crosslinked Polyethylene (PEX) Tubing
ANSI/ASTM F877-2006 交联聚乙烯(PEX)塑料热水和冷水配给系统用规范 Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
ANSI/ASTM F891-2007 带泡沫芯的复合挤压聚氯乙烯(PVC)塑料管的规范 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core
ANSI/ASTM F894-2006 聚乙烯(PE)大口径异形内壁污水管和排水管标准规范 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ANSI/ASTM F948-1994 固定流体内压下塑料管道系统和组件失效时间-试验方法 Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow
ANSI/AWWA C903-2005 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 Polyethylene-Aluminum-Polyethylene & Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) Through 2 In. (50 mm), for Water Service
ANSI/AWWA C904-2006 供水用0.5～3英寸(12～76 mm)交联聚乙烯压力管道 Cross-Linked Polyethylene Pressure Pipes, 1/2 In. (12 mm) Through 3 In. (76 mm) for Water Service
ANSI/SAE J1650-1997 无缝铜镍90-10管 Seamless Copper-Nickel 90-10 Tubing
ANSI/ASTM B407-1996 镍铁铬合金无缝管规范 Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ANSI/ASTM B423-1999 镍铁铬钼铜合金(UNS N08825 and UNS N08221)无缝管规范 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube
ANSI/ASTM B515-1996 UNS NO8800、UNS N08810和UNS NO8811合金焊管规范 Specification for Welded UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ANSI/ASTM B516-1998 镍铬铁合金(UNS N06600) UNS N06025 and UNS N06045焊管规范 Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Tubes
ANSI/ASTM B517-1998 镍铬铁合金(UNS N06600) UNS N06025 and N06045焊管试验方法 Test Method for Welded Nickel-Chromium-Iron-Alloy (UNS N06600) UNS N06025 and N06045 Pipe
ANSI/ASTM B546-1998 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和镍铬铁硅合金(UNS N06045)管规范 Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ANSI/ASTM B619-2000 焊接用镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ANSI/ASTM B622-2000 无缝镍和镍钴合金管规范 Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ANSI/ASTM B626-2001 焊接镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ANSI/ASTM B675-1996 UNS N08366及UNS N08367焊管规范 Specification for UNS N08366 and UNS N08367 Welded Pipe
ANSI/ASTM B676-1997 UNS NO8366及UNS NO8367焊管规范 Specification for UNS N08366 and N08367 Welded Tube
ANSI/ASTM B677-1999 UNS N08904、N08925和N08926无缝管规范 Specification for UNS N08904, UNS N08925, and N08926 Seamless Pipe and Tube
ANSI/ASTM B722-1995 镍铬钼钴钨铁硅合金(UNS N06333)无缝管规范 Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ANSI/ASTM B829-1999 镍和镍合金无缝管一般要求规范 Specification for General Requirements for Nickel And Nickel Alloy Seamless Pipe and Tube
ANSI/ASTM B834-1996 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/AWWA C150/A 21.50-2002 球墨铸铁管的厚度设计 Thickness Design of Ductile-Iron Pipe
ANSI/AWWA C151/A 21.51-2002 离心铸造的球墨铸铁水管 Ductile-Iron Pipe, Centrifugally Cast, for Water
ANSI/NACE TM0284-2003 耐逐级断裂的管道钢的评价 Evaluation of Pipeline Steel for Resistance to Stepwise Cracking
ANSI/AWWA C205-2007 商用4英寸和4英寸以上钢水管的水泥灰浆保护衬和涂层 Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in and Larger - Shop Applied
ANSI/AWWA C203-2002 给水钢管煤焦油保护涂层和内衬.热用搪瓷和胶带 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied
ANSI/AWWA C206-1997 钢制水管的现场焊接 Field Welding of Steel Water Pipe
ANSI/ASTM F1545-1996 带塑料内衬的铁合金管、配件和法兰规范 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges
ANSI/API RP578-1999 新的和原有合金管系统的材料检定程序 Material Verification Program for New and Existing Alloy Piping Systems
ANSI/AWWA C220-1998 4in(100mm)及以上尺寸的不锈钢管 Stainless Steel Pipe 4 in (100 mm) and Larger
ANSI LC-1-2005 使用波纹不锈钢管(CSST)的燃气管道系统 Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26)
ANSI/AGA LC-1-1991 使用波纹不锈钢管的室内燃气管线系统 Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
ANSI/AGA LC-1a-1993 使用波纹不锈钢管的室内燃气管线系统 Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
ANSI/AGA LC-1b-1994 使用波纹不锈钢管的室内燃气管线系统 Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
ANSI/API 1104-1999 管道和相关设施的焊接 Welding of Pipelines and Related Facilities
ANSI/API SPEC5L 44TH EDITION-2007 管线规范 Specification for Line Pipe
ANSI/ASME B16.1-2005 25、125、250和800级铸铁管法兰和法兰配件 Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
ANSI/ASME B16.39-1998 可锻铁螺纹管活接头 Malleable Iron Threaded Pipe Unions
ANSI/ASME B36.10M-2004 焊接锻钢管和无缝锻钢管 Welded and Seamless Wrought Steel Pipe
ANSI/ASME B36.19M-2004 不锈钢管 Stainless Steel Pipe
ANSI/ASTM A210-1996 锅炉和过热器用中碳素无缝钢管规范 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ANSI/ASTM A213/A 213M-2001 锅炉、过热器和热交换器用无缝铁素体和奥氏体合金钢管规范 Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ANSI/ASTM A249/A 249M-2001 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管规范 Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
ANSI/ASTM A312/A 312M-2001 无缝和焊接奥氏体不锈钢管规范 Specification for Seamless and Welded Austenitic Stainless Steel Pipes
ANSI/ASTM A450-1996 碳素钢管、铁素体合金钢管及奥氏体合金钢管规范 Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ANSI/ASTM A523-1996 高压管型电缆线路用平端无缝与电阻焊钢管规范 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
ANSI/ASTM A556-1996 无缝冷拉碳素钢给水加热器管规范 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
ANSI/ASTM A688/A 688M-2001 奥氏体不锈钢焊接给水加热器管规范 Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
ANSI/ASTM A814/A 814M-2001 冷加工焊接奥氏体不锈钢管规范 Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
ANSI/ASTM F2207-2006 用于金属煤气管修复的现场处理管衬套系统规范 Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes
ANSI/API SPEC5CT-2007 套管和管道规范 Specification for Casing and Tubing
ANSI/ASTM F1155-1998 管道系统材料的选择和应用规范 Practice for Selection and Application of Piping System Materials
ANSI/SAE J2027-1998 汽油燃料管保护覆层的预备标准 Preliminary Standard for Protective Covers for Gasoline Fuel Line Tubing
ANSI/SAE J513-1994 制冷用管接头(ANSI/SAE J513F的修订版) Refrigeration Tube Fittings
ANSI/NFPA 274-2003 管道绝缘材料燃烧特性评价的标准试验方法 Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
ANSI Z21.79-1997 燃气器具冷凝阀 Gas Appliances Sediment Traps
ANSI Z21.79-1997, and ANSI Z 21.79a-2005 燃气器具沉积物隔臭管 Gas Appliance Sediment Traps (same as CGA 6.21, 6.21a)
ANSI Z21.79a-2005 燃气器具除垢阀 Gas Appliance Sediment Traps (Same as CGA 6.21a)
ANSI/API 1160-2001 危险液体管道的管理系统完整性 Managing System Integrity for Hazardous Liquid Pipeline
ANSI/API 570-2000 管路检验规程.工作中管道系统的检查、修理、更替及核定(第2版、含修改件1) Piping Inspection Code - Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems (Second Edition, Including Addendum 1)
ANSI/API 574-1998 管、阀门及配件的检验 Inspection of Piping, Tubing, Valves, and Fittings
ANSI/ASME A13.1-2007 管道系统的鉴定方案 Scheme for the Identification of Piping Systems
ANSI/ASME B31.11-2002 泥浆输送管道系统 Slurry Transportation Piping Systems
ANSI/ASME B31.1-2007 动力管道 Power Piping
ANSI/ASME B31.1a-2008 动力管道 Power Piping
ANSI/ASME B31.3-2006 石油精炼管道 Process Piping
ANSI/ASME B31.4-2006 烃、液化石油气、无水氨和酒精的液体运输系统 Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols
ANSI/ASME B31.5-2006 制冷管道和传热部件 Refrigeration Piping and Heat Transfer Components
ANSI/ASME B31G-1991 测定锈蚀管道残留强度的手册 Manual for Determining the Remaining Strength of Corroded Pipelines
ANSI/ASME B31J-2008 标准测试方法的确定应力强化因素（一因素） ，非金属管道元件 Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
ANSI/ASME B31Q-2006 管道人员资格 Pipeline Personnel Qualification
ANSI/ASME PCC-2-2006 压力设备和管道的维修标准 Repair of Pressure Equipment and Piping Standard
ANSI/ASTM F1199-1988 铸造(所有温度和压力)和焊接管线滤网(150 PSIG 和150oF最大值)的规范 Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 PSIG and 150oF Maximum)
ANSI/ASTM F1200-1988 装配式(焊接)管线滤网(大于150 PSIG 和150oF)规范 Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 PSIG and 150oF)
ANSI/ASTM F1330-1997 金属研磨法管内除锈指南 Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
ANSI/ASTM F1901-2004 屋顶排水系统用聚乙烯管道和配件规范 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ANSI/ASTM F2487-2006 已安装高密度聚乙烯波纹管道的渗入和渗出验收测试用实施规程 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
ANSI/ASTM F2536a-2006 悬浮层状厚板上的塑料排渣与放气塑料管道安装指南 Guide for Installing Plastic DWV Piping - Suspended from On-Grade Slabs
ANSI/ASTM F2648-2007 地面排水设施用2～60英寸(50～1500mm)环状波纹轮廓管壁的聚乙烯(PE)管和管件的规范 Specification for 2 to 60 Inch(50 to 1500mm) Annular Corrugated Profile Wall Polyethylene(pe) Pipe and Fittings for Land Drainage Applications
ANSI/IEEE 844-2000 管道和容器的电阻抗、电感和集肤效应生热的推荐规程 Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels, Recommended Practice for
ANSI/NACE RP0204-2004 应力腐蚀断裂(SCC)直接评定法 Stress Corrosion Cracking (SCC) Direct Assessment Methodology
ANSI/ASTM F1386-1997 油罐测深用测深管和操作板结构指南 Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
ANSI/API 572-2001 压力容器检查 Inspection of Pressure Vessels
ANSI/NFPA 55-2005 便携式储气瓶中的压缩和液化气体 Compressed and Liquefied Gases in Portable Cylinders
ANSI/NFPA 290-2003 LP气体容器用无源性保护材料的燃烧试验标准 Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers
ANSI Z21.81-2004 气缸连接装置(同CSA 6.25).第2版 Cylinder Connection Devices (same as CSA 6.25) Second Edition
ANSI Z21.81a-2006 气缸连接装置用美国国家标准/CSA标准 American National Standard/CSA Standard for Cylinder Connection Devices (same as CSA 6.25a)
ANSI/AIAA S-080-1998 航天系统.金属压力容器、加压结构和压力构件 Space Systems - Metallic Pressure Vessels, Pressurized Structures, and Pressure Components
ANSI/AIAA S-081A-2006 航天系统.复合包装压力容器(COPV) Space Systems - Composite Overwrapped Pressure Vessels (COPV)
ANSI/API 510-2006 压力容器检验规程:维护、检测、鉴定、修理和更换 Pressure Vessel Inspection Code - Maintenance Inspection, Rating, Repair, and Alteration
ANSI/ASME HPS-2003 高压力系统 High Pressure Systems
ANSI/ASME PTC25-2001 减压设备 Pressure Relief Devices
ANSI/ASME RTP-1-2007 增强型热固性塑料防腐设备 Reinforced Thermoset Plastic Corrosion Resistant Equipment
ANSI/CGA P-18-2006 散装惰性气体系统的标准 Standard for Bulk Inert Gas Systems, 3rd edition
ANSI MH5.1.3M-1982 液体和气体储存器的要求 Requirements for tank containers for liquids and gases
ANSI/IAPMO Z1000-2006 预制的化粪池 Prefabricated Septic Tanks
ANSI/AWWA C652-2002 储水设备的消毒 Disinfection of Water-Storage Facilities
ANSI/AWWA D100-2005 储水用碳素钢焊接箱 Welded Carbon Steel Tanks for Water Storage
ANSI/AWWA D115-2006 带环形预应力钢筋的环形预应力混凝土水箱用标准 Standard for Circular Prestressed Concrete Water Tanks with Circumferential Tendons
ANSI/AWWA D130-2002 便携式储水装置柔性薄膜衬和浮动盖材料 Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage
ANSI/UL 2227-2008 防溢满装置的标准 Standard for Overfilling Prevention Devices (Proposal dated 8/10/07)
ANSI/AWWA D102-2006 涂层的钢制储水箱 Coating Steel Water - Storage Tanks
ANSI/NFPA 326-2005 装有易燃或可燃液体的储罐的安全入口 Safe Entry Into Tanks Containing Flammable or Combustible Liquids
ANSI/API 2000-2000 排气和低压储罐:非冷藏的和冷藏的 Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and Refrigerated
ANSI/API 2015-2001 石油贮罐的安全注油口和清洗 Safe Entry and Cleaning of Petroleum Storage Tanks
ANSI/API 2016-2001 进入和清洗汽油存储罐的导则和程序 Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks
ANSI/API 575-2004 常压和低压储藏罐的检验指南和方法 Guidelines and Methods for Inspection of Existing Atmospheric and Low Pressure Storage Tanks
ANSI/API 651-2006 地面石油贮罐的阴极保护 Cathodic Protection of Aboveground Petroleum Storage Tanks
ANSI/API MPMS2.2E-2004 石油和液化石油产品.卧式柱形油罐的校准.第1部分:人工法 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点