畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/NSF 61Addendum 1 (i74)-2007 饮用水系统元部件.健康影响 Drinking water system components - Health effects
ANSI/NSF 62(i14)-2007 饮用水蒸馏系统 Drinking water distillation systems
ANSI/NSF 62(i16)-2007 饮用水蒸馏系统 Drinking water distillation systems
ANSI/NSF 62(i17)-2007 饮用水蒸馏系统 Drinking water distillation systems
ANSI/NSF 62(i18)-2007 饮用水蒸馏系统 Drinking water distillation systems
ANSI/NSF 62(i8)-2006 饮用水蒸馏系统 Drinking water distillation systems
ANSI/NSF 60(i40)-2006 饮用水处理用化学药品.对健康的影响 Drinking water treatment chemicals - Health effects
ANSI/NSF 60-2005 饮用水处理用化学品.对健康的影响 Drinking water treatment chemicals - Health effects
ANSI/NSF 60Addendum 1 (i35)-2005 饮用水处理用化学制品.对健康的影响 Drinking Water Treatment Chemicals - Health Effects
ANSI/NSF 60Addendum 1 (i41)-2005 饮用水处理用化学制品.对健康的影响 Drinking Water Treatment Chemicals - Health Effects
ANSI/NSF 60Addendum 1.0-2004 饮用水处理装置.健康影响 Drinking Water Treatment Chemicals- Health Effects
ANSI/NSF 61-A1-2001 饮用水系统元件.对健康的影响 Drinking Water System Components - Health Effects
ANSI/AWWA C600-2005 球墨铸铁总水管及附件的安装 Installation of Ductile-Iron Water Mains and Their Appurtenances
ANSI/AWWA C651-2005 消毒总水管 Disinfecting Water Mains
ANSI/AWWA G100-2005 水处理设备的操作和管理 Water Treatment Plant Operation and Management
ANSI/AWWA G300-2007 水源保护 Source Water Protection
ANSI/NSF 42(i59)-2007 饮用水处理装置.美学效应 Drinking water treatment Units - Aesthetic effects
ANSI/NSF 58(i20)-2007 反渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i28)-2006 反渗透饮用水处理系统 Reverse Osmosis Drinking Water Treatment Systems
ANSI/NSF 58(i30)-2004 反渗透饮用水处理系统 Reverse Osmosis Drinking Water Treatment Systems
ANSI/NSF 58(i36)-2004 翻转渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i40)-2004 翻转渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i43)-2005 反渗透饮用水处理系统 Reverse Osmosis Drinking Water Treatment Systems
ANSI/NSF 58(i45)-2007 反渗透饮用水处理系统 Reverse Osmosis Drinking Water Treatment Systems
ANSI/NSF 58(i47)-2007 反渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i51)-2007 反渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i52)-2007 反渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58(i53)-2007 反渗透饮用水处理系统 Reverse osmosis drinking water treatment systems
ANSI/NSF 58-2003 饮用水反渗透处理系统 Reverse Osmosis Drinking Water Treatment Systems
ANSI/AWWA C115/A 21.15-2005 带球墨铸铁或灰口铸铁螺纹法兰的法兰球墨铸铁管 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
ANSI/ASME B18.2.3.10M-1996 四方头螺栓(米制系列) Square Head Bolts (Metric Series)
ANSI/SAE J1061-1992 普通螺栓、螺钉和双头螺栓的表面不均匀性 Surface Discontinuities on General Application Bolts, Screws, and Studs
ANSI/SAE J123-1994 螺栓、螺纹、螺母表面断续疲劳试验 Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
ANSI/NSF 55(i18)-2004 紫外线微生物水处理系统(i18) Ultraviolet microbiological water treatment systems (i18)
ANSI/NSF 55(i20)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/NSF 55(i22)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/NSF 55(i23)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/NSF 55(i24)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/NSF 55(i25)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/NSF 55(i26)-2007 紫外线微生物水处理系统 Ultraviolet microbiological water treatment systems
ANSI/AWWA D104-2004 自动控制的钢制水箱内部的外加电流阴极保护 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks
ANSI/AWWA C510-1997 双止回阀防回流组件 Double Check Valve Backflow-Prevention Assembly
ANSI/AWWA C511-1997 减压防回流组件 Reduced Pressure Principle Backflow Prevention Assembly
ANSI/AWWA C207-2007 给水工程用钢制管法兰.4英寸-144英寸(100mm-3600mm) Steel Pipe Flanges for Waterworks Service - Sizes 4 in. through 144 in. (100 mm through 3,600 mm)
ANSI/AWWA C208-2007 预制钢水管配件尺寸 Dimensions for Fabricated Steel Water Pipe Fittings
ANSI/AWWA C950-2007 玻璃纤维压力管 Fiberglass Pressure Pipe
ANSI/AWWA C213-2007 钢制水管线的内、外部用熔融粘结环氧涂层 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
ANSI/AWWA C224-2007 钢水管、连接件、配件和特殊部件的内部和外部用尼龙11基聚酰胺涂层系统 Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connections, Fittings, and Special Sections
ANSI/IEEE 980-1994 变电站油溢污染与控制指南 Guide for Containment and Control of Oil Spills in Substations
ANSI/NSF 177-2004 喷水过滤系统(i1) Shower Filtration systems (i1)
ANSI/ASTM D6061-2001 呼吸式气溶胶采样器性能评价惯例 Practice for Evaluating the Performance of Respirable Aerosol Samplers
ANSI/ASTM E1972-2004 在湿金属切削环境中使气溶胶影响最小化的实施规程 Practice for Minimizing Effects of Aerosols in Wet Removal Environment
ANSI/ESD SP3.3-2006 空气例子发生器的周期性验证 Periodic Verification of Air Ionizers
ANSI/SAE J1045-1993 车辆加油排出物测量的技术和测量工具 Instrumentation and Techniques for Vehicle Refueling Emissions Measurement
ANSI/SAE J1892-1998 车辆排放条形编码构形标签的推荐实施规程 Recommended Practice for Bar-Coded Vehicle Emission Configuration Label
ANSI/ISO 14065-2007 温室气体.认可或承认的其他形式用温室气体检验和确认机构的要求 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
ANSI/IEEE C57.136-2000 额定功率大于500kVA的油浸式电力变压器和并联电抗器的声级抑制和测定指南 Guide for Sound Level Abatement & Determination for Liquid-Immersed Power Transformers & Shunt Reactors Rated Over 500 kVA
ANSI/AWS F1.1M-2006 焊接和有关工艺过程产生的悬浮颗粒的取样方法 Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
ANSI/AWS F1.2-2006 焊接和有关工艺中测量烟雾形成速度和总烟雾排放量的实验室方法 Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes
ANSI/AWS F1.5M-2003 焊接和类似工艺用的气体取样和分析方法 Sampling and Analyzing Gases from Welding and Allied Processes, Methods for
ANSI/ACMA/ICPA UEF-1-2004 敞口造型混合工艺的排放因素评估 Estimating Emission Factors from Open Molding Composite Processes
ANSI/AIHA Z9.10-2007 包括工业区气体排放系统的设计和实施的基本原则 Fundamentals Governing the Design and Operation of Dilution Ventilation Systems in Industrial Occupancies
ANSI/AIHA Z9.2-2001 本地排气系统的操作设计控制基础 Fundamentals Governing the Design and Operation of Local Exhaust Systems
ANSI/AIHA Z9.7-2007 空气再循环 Recirculation of Air
ANSI/ASTM D5485-2005 用锥型腐蚀计测定燃烧产品腐蚀效应的火焰试验响应标准(10.02) Fire Test Response Standard for Determining the Corrosive Effective of Combustion Products Using the Cone Corrosimeter (10.02)
ANSI/ASTM F1791-2000 空气和氮气系统过滤器规范 Specification for Filters Used in Air or Nitrogen Systems
ANSI/UL 867-2007 静电空气净化器 Electrostatic Air Cleaners (Proposal dated 9/21/07)
ANSI/UL 900-2004 空气过滤组件的性能测试 Test Performance of Air Filter Units
ANSI/NFPA 318-2006 半导体生产设施的防护标准 Standard for the Protection of Semiconductor Fabrication Facilities
ANSI/FMRC FM4910-2004 清洁室材料可燃性试验协议 Cleanroom Materials Flammability Test Protocol
ANSI/IEST/ISO 14644-1-1999 洁净室和相关控制环境.第1部分:空气清洁度的分级 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness
ANSI/IEST/ISO 14644-2-2000 洁净室和相关控制环境.第2部分:证明持续符合 IEST/ISO 14644-1-1999要求的试验和监测规范 Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with IEST/ISO 14644-1:1999
ANSI/IEST/ISO 14644-3-2005 洁净室及其相关控制环境.第3部分:试验方法 Cleanrooms and associated controlled environments - Part 3: Test methods
ANSI/IEST/ISO 14644-4-2001 洁净室和相关控制环境.第4部分：设计、建造和启动 Cleanrooms and associated controlled environments-Part 4: Design, construction and start-up
ANSI/IEST/ISO 14644-5-2004 洁净室和相关控制环境.第5部分:操作室 Cleanrooms and associated controlled environments-Part 5: Operations
ANSI/IEST/ISO 14644-6-2008 无菌室及相关受控环境.第6部分:词汇 Cleanrooms and associated controlled environments - Part 6: Vocabulary
ANSI/IEST/ISO 14644-7-2004 洁净室和相关控制环境.第7部分:分离装置(洁净空气罩、手套箱、分离器和微循环设备) Cleanrooms and associated controlled environments-Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments)
ANSI/IEST/ISO 14644-8-2006 洁净室及其相关控制环境.第8部分:空气传播分子污染物分类 Cleanrooms and associated controlled environments - Part 8: Classification of airborne molecular contamination
ANSI/ASTM D6056-2001 用传输电子显微镜测定工作环境空气中单晶陶瓷须晶浓度的方法 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
ANSI/ASTM D6057-2001 用相衬显微镜测定工作环境空气中单晶陶瓷须晶浓度的方法 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ANSI/ASTM D6058-2001 工作环境空气中单晶陶瓷须晶浓度测定惯例 Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ANSI/ASTM D6059-2001 用扫描电子显微镜测定工作环境空气中单晶陶瓷须晶浓度的方法 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ANSI/ASTM D6246-2001 扩散采样器性能评价惯例 Practice for Evaluating the Performance of Diffusive Samplers
ANSI/ASTM E1553-1993 在清除和建筑活动中收集的空气中铅颗粒的实施规程(04.11) Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (04.11)
ANSI/ASTM E2144-2002 工作场所大气环境里金属加工流体气溶胶中内毒素的人体取样和分析的实施规范 Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ANSI/SMACNA 008-2008 已使用建筑物处于修建状态下的IAQ导则 IAQ Guidelines for Occupied Buildings Under Construction
ANSI/ASSE 1001-2001 应用管道的大气式真空制动器 Pipe-Applied Atmospheric-Type Vacuum Breakers
ANSI/ASTM D4323-1992 通过反射系数变化率对空气中硫化氢的试验方法 Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ANSI/ASTM E1741-1995 用原子光谱测定法在对后期分析消除和构建活动过程中收集的空中微粒铅样本制备实施规程 Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (04.11)
ANSI/ASTM F2189-2002 氮氧化物监测仪特殊要求规范 Specification for Particular Requirements for Nitric Oxide Monitors
ANSI/ASTM F2608-2007 作为真空清洁处理工艺结果测定房间空气微粒数改变的试验方法 Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
ANSI AIHAZ 9.1-2006 粗糙表面油罐操作空气传播污染物的控制和通风 Ventilation and Control of Airborne Contaminants During Open-Surface Tank Operations
ANSI/UL 2034-2008 单一和多测点一氧化碳探测器的安全标准 Standard for Safety for Single and Multiple Station Carbon Monoxide Detectors
ANSI Z245.21-2008 废弃物和可回收材料用设备技术和操作.固定压实机.安装、维护和操作的安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors - Safety Requirements for Installation, Maintenance and Operation
ANSI Z245.51-2008 废弃物和可再循环材料用设备技术和操作.废碴压块设备.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements
ANSI/ASTM D6691-2001 利用规定的微生物同生群测定海洋环境中塑料需氧生物降解的方法 Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium
ANSI/ASABE S596-2006 回收农药和相关产品用塑料箱 Recycling Plastic Containers from Pesticides and Pesticide-Related Products
ANSI/ASTM F1673-2004 聚偏氟乙烯(PVDF)腐蚀性废物排放系统的规范 Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ANSI/NSF 21(i3)-2007 热塑性垃圾箱 Thermoplastic refuse containers
ANSI/NSF 21-1996 热塑性塑料垃圾容器 Thermoplastic Refuse Containers
ANSI/ASTM F1322-1990 船用焚烧装置选用指南 Guide for Selection of Shipboard Incinerators
ANSI/NFPA 82-2004 焚化炉、废弃物和亚麻布制品处理系统和设备 Incinerators, Waste and Linen Handling Systems and Equipment
ANSI Z245.1-2008 废弃物和可回收材料用设备技术和操作.移动式废弃物和可回收材料的回收、运输和压实设备.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials ?Mobile Wastes and Recyclable Materials Collection, Transportation, and Compaction Equipment ?Safety Requirements
ANSI Z245.2-2008 废弃物和可回收材料用设备技术和操作.固定压实机.安装、维护和操作的安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors - Safety Requirements for Installation, Maintenance and Operation
ANSI Z245.30-2008 废弃物和可回收材料用设备技术和运行.废弃物容器.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials ?Waste Containers ?Safety Requirements
ANSI Z245.41-2008 废弃物和可回收材料用设备技术和操作.混合的可回收材料的处理设备.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials - Safety Requirements
ANSI Z245.5-2008 废弃物和可再循环材料用设备技术和操作.打包设备.安装、维护和操作用安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements for Installation, Maintenance and Operation
ANSI Z245.60-2008 废弃物和可回收材料用设备的技术和运行.废弃物容器.兼容尺寸 Equipment Technology and Operations for Wastes and Recyclable Materials ?Waste Containers ?Compatibility Dimensions
ANSI Z4.3-1995 公共卫生设施.非下水道排污的废水处理系统.最低要求 Sanitation - Nonsewered waste-disposal systems - Minimum requirements
ANSI/AHAM TC-1-2007 测定家用垃圾压实机性能的方法 Method for Measuring Performance of Household Trash Compactors
ANSI/ASAE EP403.3-1999 用于动物废物管理的厌氧贮留池设计 Design of Anaerobic Lagoons for Animal Waste Management
ANSI/ASME PTC34-2007 废弃物焚烧能量回收 Waste Combustors with Energy Recovery
ANSI/ASTM D6340-1998 在水和堆肥环境中测定放射性同位素塑料氧化降解的方法 Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an (A) Aqueous or (B) Compost Environment
ANSI/ASTM F1799-1997 船舶产生废物管理审核指南 Guide for Shipboard Generated Waste Management Audits
ANSI/NSF 13(i2)-2005 垃圾处理机和处理系统 Refuse processors and processing systems
ANSI/NSF 13(i3)-2007 垃圾处理机和处理系统 Refuse processors and processing systems
ANSI/NSF 13-2001 垃圾压实器和压实系统 Refuse Compactors and Compactor Systems
ANSI/UL 1086-2007 家用垃圾压实器的安全标准 Standard for Safety for Household Trash Compactors
ANSI/UL 1315-2003 金属制废纸容器安全标准 Standard for Safety for Metal Waste Paper Containers
ANSI/UL 242-2004 装废纸的非金属容器 Nonmetallic Containers for Waste Paper
ANSI/UL 32-2004 金属废物箱 Metal Waste Cans
ANSI/UL 430-2006 废物处理机 Waste Disposers
ANSI/UL 2208-2006 溶剂蒸馏装置(推荐日期2006-10-20) Solvent Distillation Units (Proposals dated 10/20/06)
ANSI/SAE J2456-1998 汞开关移动过程 Mercury Switch Removal Process
ANSI N13.45-1998 实验性低强度放射性废物的焚化 Incineration of Institutional Low-Level Radioactive Waste
ANSI/ANS 16.1-2003 用短期试验法测量已固化的低放射性废物的浸出性 Measurement of the Leachability of Solidified Low-Level Radioactive Wastes by a Short-Term Test Procedure
ANSI/ASME A112.14.6-2006 脂肪、油和润滑脂(FOG)排除系统 FOG (Fats, Oils & Greases) Disposal Systems
ANSI/ASTM D6160-1998 气相色谱法测定废料中多氯联苯的试验方法 Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
ANSI/ASTM F2283-2004 船载除油系统的规范 Specification for Shipboard Oil Pollution Abatement System
ANSI/ASTM D5210-1992 测定在城市污水管污泥中塑料材料的厌氧生物降解的试验方法 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03)
ANSI/ASTM D7066-2004 用红外测定法测定三氟氯乙烯(s-316)可回收石油和润滑脂及非极性材料的二聚物/三聚物的试验方法 Test Method for Dimer/Trimer of Chlorotrifluoroethylene (s-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ANSI/ASTM F2363-2006 美国海岸警卫队Ii型或Imo Marpol 73/78附录Iv海上卫生装置(流动通过处理)的规范 Specification for United States Coast Guard Type Ii or Imo Marpol 73/78 Annex Iv Marine Sanitation Devices (Flow-Through Treatment)
ANSI/ASTM D5988-1997 混合后的残留塑料或塑料废物中有氧生物降解测定方法 Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing
ANSI Z9.3-1985 排气系统.喷光漆操作.设计、建造和通风安全性条列 Exhaust Systems - Spray Finishing Operations - Safety Code for Design, Construction and Ventilation
ANSI/IPC 1066-2004 无铅组件、部件和设备上用来标识无铅和其他登记性材料的标记、符号和标签 Marking, Symbols and Labels for Identification of Lead Free and Other Reportable Materials in Lead Free Assemblies, Components and Devices
ANSI/ISO/ASQ E14025-2006 环境标志和通报.III类环境通报.原则和程序 Environmental labels and declarations - Type III environmental declarations - Principles and procedures
ANSI/NSF/ISO 14020-2001 环境标签和声明.一般原则 Environmental Labels and Declarations - General Principles
ANSI/NSF/ISO 14021-2001 环境标签和声明.自我声明式环境要求(II类环境标签) Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)
ANSI/NSF/ISO 14024-2001 环境标签和声明.I类环境标签.原则和程序 Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures
ANSI/ASTM D6081-1997 润滑油对水边植物毒性测试惯例:样品制备和结果解释 Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparataion and Results Interpretation
ANSI/ISO/ASQ E14064-1-2006 温室气体.第1部分:在组织阶段对温室气体辐射和消除的量化和报告的规范与指南 Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
ANSI/ISO/ASQ E14064-2-2006 温室气体.第2部分:在项目计划阶段对温室气体辐射降低或消除增强的量化、监测和报告的规范与设计指南 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
ANSI/ISO/ASQ E14064-3-2006 温室气体.第3部分:温室气体确定的证实和验证的规范与指南 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
ANSI/AWS F1.3M-2006 焊接环境污染评定的取样方法指南 A Sample Strategy Guide for Evaluating Contaminants in the Welding Environment
ANSI Z490.1-2001 安全、健康和环境治理的实施规范 Accepted Practices for Safety, Health, and Environmental Training
ANSI/ASTM/ISO 14042-2000 生物圈评价.冲击评价 Life Cycle Assessment - Impact Assessment
ANSI/ASTM/ISO 14043-2000 生物圈评价.解释 Life Cycle Assessment - Interpretation
ANSI/ASTM/ISO 14031-1999 环境管理.环境性能评价.导则 Environmental Management - Environmental Performance Evaluation - Guidelines
ANSI/ASTM/ISO 14041-1998 生物圈评价.生物品种分析 Life Cycle Assessment - Inventory Analysis
ANSI/ASTM/ISO 14049-2000 环境管理体系.生命周期评价.ISO 14041目标、范围定义和现状分析应用示例 Environmental Management - Life Cycle Assessment - Examples of Application of ISO 14041 to Goal and Scope Definition and Inventory Analysis
ANSI/ISO 14040-1997 环境管理.寿命周期评价.原则和框架 Environmental Management - Life Cycle Assessment - Principles and Framework
ANSI/ISO/ASQ E14001-2004 环境管理系统.使用规范和指南 Environmental Management Systems - Specification with Guidance for Use
ANSI/ISO/ASQ E14004-2004 环境管理系统.原则、系统和配套技术的一般指南 Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques
ANSI S3.22-2003 助听器特性的规范 Specification of Hearing Aid Characteristics
ANSI S3.25-1989 封闭式仿真耳 Occluded ear simulator
ANSI S3.35-2004 在模拟现场工作条件下助听器性能特性的测量方法 Methods of Measurement of Performance Characteristics of Hearing Aids Under Simulated In-Situ Working Conditions
ANSI S3.37-1987 耳廓后助听器的优选耳部吊钩波导口螺纹 Preferred Earhook Nozzle Thread for Postauricular Hearing Aids
ANSI S3.42-1992 助听器的宽带噪音信号测试 Testing Hearing Aids with a Broad-Band Noise Signal
ANSI S3.46-1997 助听器真耳性能特性的测量方法 Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids
ANSI/ASTM F2531-2005 Treestand座负载能力的试验方法 Test Method for the Load Capacity of Treestand Seats
ANSI/RESNA WCVolume I (Section 19)-2000 轮椅.卷I:要求和试验方法.作机动车座椅用的轮椅 Wheelchairs - Volume I: Requirements and Test Methods for Wheelchairs - Wheelchairs Used as Seats in Motor Vehicles
ANSI/RESNA WCVolume I-1998 轮椅.卷I:轮椅(包括小型摩托车)要求和试验方法 Wheelchairs - Volume I: Requirements and Test Methods for Wheelchairs (including Scooters)
ANSI/RESNA WCVolume II-1998 轮椅.卷II:电动轮椅(包括小型摩托车)补充要求 Wheelchairs - Volume II: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems
ANSI/IESNA RP-29-2006 医院和康复设备照明 Lighting for Hospitals and Health Care Facilities
ANSI/IEEE 602-2007 医疗保健设施用电子系统的推荐实施规程 Recommended Practice for Electric Systems in Health Care Facilities
ANSI/ASTM E2280-2003 对医疗保健设施的病房内用的软垫座椅家具受火灾影响进行评估的指南 Guide for the Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ANSI/NCPDP BUSV 2.0-2005 票据处理装置标准实施指南2.0版本 Billing Unit Standard Implementation Guide Version 2.0
ANSI/NCPDP FBV 1.0-2005 药典和收益标准版本1.0 Formulary and Benefit Standard Version 1.0
ANSI/ASTM F1862-2000 利用合合成液进行医用面膜耐渗透力(定量定速水平喷射)试验方法 Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
ANSI/3-A P3-A 002-2008 用于加工设备和系统材料的药物3-Ar卫生标准 Pharmaceutical 3-Ar Sanitary/Hygienic Standards for Materials for Use in Process Equipment and Systems
ANSI/HL7 V3 DSR, R 1-2005 HL7版本3标准:药物稳定性报告.第1次发布 HL7 Version 3 Standard: Drug Stability Reporting, Release 1
ANSI/ASTM E1302-2000 水可混合的金属工作液条件下测试动物剧毒性指南 Guide for Acute Animal Toxicity Testing of Water-Miscible Metal Working Fluids
ANSI/NCPDP MRV 04.01-2007 制造商折扣利用、计划、定则、市场开发和对帐用Flat-文件04.01标准版本 Manufacturer Rebate Utilization, Plan, Formulary, Market Basket, and Reconciliation Flat File Standard Version 04.01
ANSI/ASTM E1939-2004 血液辐照剂量测定的实施规程 Practice for Blood Irradiation Dosimetry
ANSI/CLSI H1-A 5-2003 静脉取血样用软管和附件;第5版 Tubes and Additives for Venous Blood Specimen Collection; Approved Standard- Fifth Edition
ANSI/NCCLS C46-A-2001 血液气体和 pH 分析以及相关测量;获准的指南 Blood Gas and pH Analysis and Related Measurements; Approved Guideline
ANSI/NCCLS H11-A 3-2000 实验室分析用动脉血的经皮采集 Percutaneous Collection of Arterial Blood for Laboratory Analysis
ANSI/NCCLS H2-A 4-2001 红细胞沉降率试验方法 Methods for the Erythrocyte Sedimentation Rate (ESR) Test
ANSI/AAMI BE83-2006 医疗器械的生物评价.第18部分:材料的化学特性 Biological evaluation of medical devices - Part 18: Chemical characterization of materials
ANSI/AAMI/ISO 10993-12-2007 医疗器械的生物评价.第12部分:样品制备和标样 Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials
ANSI/AAMI/ISO 10993-15-2000 医疗器械的生物学评价.第15部分:金属与合金降解产物的识别与定量 Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys
ANSI/AAMI/ISO 10993-17-2002 医疗器械的生物评定.第17部分:可滤出物质允许极限值的确定 Biological Evaluation of Medical Devices - Part 17: Establishment of Allowable Limits for Leachable Substances
ANSI/AAMI/ISO 10993-4-2002 医疗器械的生物评定.第4部分:与血液相互作用的试验的选择 Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood
ANSI/AAMI/ISO 10993-4AMD 1-2006 医疗器械的生物评定.第4部分:与血液相互作用的试验的选择(修改件1) Biological evaluation of medical devices - Part 4: Selection of test for interactions with blood (Amendment 1)
ANSI/AAMI/ISO 10993-6-2007 医疗装置的生物学评估.第6部分:植入后局部效应的试验 Biological Evaluation of Medical Devices - Part 6: Tests for Local Effects after Implantation
ANSI/AAMI/ISO 10993-7-1995 医疗器械的生物评价.第7部分:环氧乙烷残留物 Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals
ANSI/AAMI/ISO 14155-1-2003 医疗器械的临床调查 Clinical Investigation of Medical Devices
ANSI/AAMI/ISO 22442-1-2007 医疗设备用动物组织及其衍生物.第1部分:风险管理的应用 Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management
ANSI/AAMI/ISO 22442-2-2007 医疗设备用动物组织及其衍生物.第2部分:来源控制、采集和处理 Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling
ANSI/AAMI/ISO 22442-3-2007 医疗设备用动物组织及其衍生物.第3部分:病毒和遗传性海绵状脑病(TSE)试剂的消灭和/或失效的确认 Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents
ANSI/AAMI PB70-2003 医疗保健设施中使用的防护服和防护布的防液性能和分类 Liquid Barrier Performance and Classification of Protective Apparel and Drapes Intended for Use in Health Care Facilities
ANSI/ASTM D7372-2007 熟练试验程序结果的分析和说明用标准指南 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ANSI/CLSI M2-A 9-2006 抗菌盘易感性试验的性能标准.采用标准.第9版 Performance Standards for Antimicrobial Disk Susceptibility Tests; Approved Standard - Ninth Edition
ANSI/CLSI M7-A 7-2006 需氧细菌增长用稀释抗菌剂易感性的试验方法 Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically
ANSI/NCCLS GP17-A 2-2004 临床实验室安全.验收导则 Clinical Laboratory Safety; Approved Guideline
ANSI/NCCLS M11-A 6-2004 厌氧菌的抗菌易感性试验方法 Antimicrobial Susceptibility Testing of Anaerobic Bacteria, Methods for
ANSI/AAMI ST35-2003 保健设施和非门诊医疗装置的生物净化和安全处理 Safe Handling and Biological Decontamination of Medical Devices in Health Care Facilities and in Nonclinical Settings
ANSI/AAMI ST58-2005 医疗保健设施中化学药剂杀菌和高水平消毒 Chemical sterilization and high-level disinfection in health care facilities
ANSI/AAMI ST 67-2003 保健产品的灭菌.验证和常规控制的要求.辐射灭菌 Sterilization of Health Care Products - Requirements for products labeled "STERILE"
ANSI/AAMI ST77-2006 可再利用的医疗设备杀菌用密封装置 Containment devices for reusable medical device sterilization
ANSI/AAMI/ISO 11137-1-2006 保健产品的灭菌.辐射.第1部分:医疗装置消毒的开发、确认和程序控制的要求 Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
ANSI/AAMI/ISO 11137-2-2006 保健产品的灭菌.辐射.第2部分:确定杀菌剂量 Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose
ANSI/AAMI/ISO 11137-3-2006 保健产品的灭菌.辐射.第3部分:剂量测定方面指南 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects
ANSI/AAMI/ISO 11607-1-2006 最后灭菌的医疗器械的包装.第1部分:原材料、消毒阻挡系统和包装的要求 Packaging for teminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging
ANSI/AAMI/ISO 11607-2-2006 最后灭菌的医疗器械的包装.第2部分:组成、密封和装配过程的确认和要求 Packaging for terminally sterilized medical devices - Part 2: Validation and requirements for forming, sealing and assembly processes
ANSI/AAMI/ISO 14160-1998 医疗器械灭菌.使用液体化学灭菌剂对包括动物源材料在内的一次性使用医疗器具进行灭菌的确认和常规控制 Sterilization of Medical Devices - Validation and Routine Control of the Sterilization by use of Liquid Chemical Sterilants of Single-Use Medical Devices Incorporating Materials of Animal Origin
ANSI/AAMI/ISO 17665-1-2005 医疗保健产品.湿热.医疗装置消毒的开发、确认和程序控制的要求 Sterilization of health care products - Moist heat - Requirements for development, validation and routine control of a sterilization process for medical devices
ANSI/AAMI/ISO 11138-2-2006 医疗保健产品灭菌.生物指示器.第2部分:环氧乙烷灭菌处理用生物指示器 Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes
ANSI/AAMI/ISO 11140-1-2005 保健产品的消毒.化学指示剂.第1部分:一般要求 Sterilization of health care products - Chemical indicators - Part 1: General requirements
ANSI/AAMI/ISO 11140-3-2007 卫生保健品灭菌.化学指示剂.第3部分:布维-狄(Bowie和Dick)型蒸汽渗透试验用2级指示剂系统 Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicators systems for use in the Bowie and Dick steam penetration test
ANSI/AAMI/ISO 11140-4-2007 卫生保健品灭菌.化学指示剂.第4部分:蒸汽渗透检测布维-狄(Bowie和Dick)型试验可选2级指示剂 Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration
ANSI/AAMI/ISO 11140-5-2007 卫生保健品灭菌.化学指示剂.第5部分:布维-狄(Bowie和Dick)型排气试验纸和试验包用2级指示剂 Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick air removal test sheets and packs
ANSI/AAMI/ISO 18472-2006 保健产品的消毒.生物和化学指示剂.试验器械 Sterilization of health care products - Biological and chemical indicators - Test equipment
ANSI/AAMI ST24-1999 卫生保健机构用一般用途的环氧乙烷自动灭菌器和环氧乙烷无菌源 Automatic, general purpose ethylene oxide sterilizers and ethylene oxide sterilant sources intended for use in health care facilities
ANSI/AAMI ST34-1991 工业灭菌处理中环氧乙烷和蒸气灭菌生物指示剂的使用指南 Guideline for the Use of Ethylene Oxide and Steam Biological Indicators in Industrial Sterilization Processes
ANSI/AAMI ST40-2004 牙科和医疗设施中台式干热(加热的空气)灭菌和无菌性保证 Table-Top Dry Heat (Heated Air) Sterilization and Sterility Assurance in Dental and Medical Facilities
ANSI/AAMI ST50-2004 干热(加热空气)灭菌器 Dry Heat (Heated Air) Sterilizers
ANSI/AAMI ST55-2003 台式蒸气灭菌器 Table-Top Steam Sterilizers
ANSI/AAMI ST8-2001 医院蒸汽灭菌器 Hospital Steam Sterilizers
ANSI/AAMI/ISO 14161-2000 灭菌的保健品-生物指标-指导，为选拔，使用和解释结果 Sterilization of health care products - Biological indicators - Guidance for the selection,use,and interpretation of results
ANSI/AAMI ST 63-2002 保健品灭菌.医疗器械工业灭菌过程的设计、批准和常规控制要求.干热 Sterilization of Health Care Products - Requirements for the development,validation,and routine control of an industrial sterilization process for medical devices - Dry heat
ANSI/AAMI ST41-1999 好医院采用的环氧乙烷灭菌和无菌保证措施 Ethylene oxide sterilization in health care facilities: Safety and effectiveness
ANSI/AAMI ST79-2006 医疗设备中蒸汽消毒和灭菌保证用综合指南 Comprehensive guide to steam sterilization and sterility assurance in health care facilities
ANSI/AAMI ST81-2004 医疗器件的消毒.由生产商提供的可反复消毒的医疗器件的处理信息 Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices
ANSI/AAMI/ISO 11135-1-2007 卫生保健品灭菌.环氧乙烷.第1部分:医疗设备灭菌过程开发、确认和常规控制的要求 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
ANSI/AAMI/ISO 11137-1994/A1-2002 保健产品的灭菌.验证和常规控制的要求.辐射灭菌 Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization
ANSI/AAMI/ISO 11138-1-2006 医疗保健产品灭菌.生物指示器.第1部分:一般要求 Sterilization of health care products - Biological indicators - Part 1: General requirements
ANSI/AAMI/ISO 11138-3-2006 医疗保健产品灭菌.生物指示器.第3部分:湿热灭菌处理用生物指示器 Sterilization of Health Care Products - Biological Indicators, Part 3: Biological Indicators for Moist Heat Sterilization Processes
ANSI/AAMI/ISO 11138-4-2006 医疗保健产品灭菌.生物指示器.第4部分:干热灭菌处理用生物指示器 Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes
ANSI/AAMI/ISO 11138-5-2006 医疗保健产品灭菌.生物指示器.第5部分:甲醛溶液灭菌处理用生物指示器 Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
ANSI/AAMI/ISO 11737-1-2006 医疗器械消毒.微生物法.第1部分:产品微生物群落数测定 Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products
ANSI/AAMI/ISO 11737-2-1998 医疗器械灭菌.微生物学方法.第2部分:确认灭菌过程中进行的无菌试验 Sterilization of Health Care Products - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization Process
ANSI/AAMI/ISO 13485-2003 质量管理体系.医疗装置.管理用系统要求 Quality Management Systems - Medical Devices - System Requirements for Regulatory Purposes
ANSI/AAMI/ISO 14937-2000 医疗保健产品灭菌.医用设备用消毒剂的特性及消毒方法的开发、确认和常规控制的一般要求 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ANSI/AAMI/ISO 15882-2003 保健产品的消毒.化学指示剂.选择、使用和结果说明指南 Sterilization of health care products - Chemical indicators - Guidance for the selection, use and interpretation of results
ANSI/ADA 101-2001 牙根槽器械.一般要求 Root Canal Instruments - General Requirements
ANSI/ADA 1047-2006 电子牙周附着的标准含量 Standard Content Of An Electronic Periodontal Attachment
ANSI/ADA 23-1982 牙科用挖钻 Dental Excavating Burs
ANSI/ADA 34-1978 牙科用抽吸式注射器 Dental Aspirating Syringes
ANSI/ADA 34a-1981 牙科用抽吸式注射器 Dental Aspirating Syringes
ANSI/ADA 44-1979 牙科电手术器械 Dental Electrosurgical Equipment
ANSI/ADA 54-1986 牙科用双点非注射药物用一次性针管 Double-Pointed, Parenteral, Single-Use Needles for Dentistry
ANSI/ADA 58-2004 H型牙根管锉 Root Canal Files, Type H (Hedstrom)
ANSI/ADA 63-2006 牙根管倒钩拔髓针和锉 Root Canal Barbed Broaches and Rasps
ANSI/ADA 71-2001 牙根管充填冷凝器(充填器和扩孔器) Root Canal Filling Condensers (Pluggers and Spreaders)
ANSI/ADA 78-2006 牙髓封闭点 Endodontic Obturating Points
ANSI/ADA 95-2003 牙根管扩大器 Root Canal Enlargers
ANSI/ADA SpecificationNo. 73-2008 牙科吸水点 Dental Absorbent Points
ANSI/ADA 89-1999 牙科用工作灯 Dental Operating Lights
ANSI/ADA 25-2000 牙科用X射线设备和附属装置 Dental X-ray Equipment and Accessory Devices
ANSI/ADA 26-1991 牙科X射线设备和组合装置 Dental X-Ray Equipment & Accessory Devices
ANSI/ADA 43-1986 牙科用电动混汞器 Electrically Powered Dental Amalgamators
ANSI/ADA 46-2004 牙科用椅 Dental Chairs
ANSI/ADA 47-2006 牙科用设备 Dental Units
ANSI/ADA 48-2004 可视光修补装置 Visible Light Curing Units
ANSI/ADA 70-1999 牙科X-射线防护围裙和附件设施 Dental X-Ray Protective Aprons and Accessory Devices
ANSI/ADA 74-2002 牙医的工作凳 Dental Operator's Stools
ANSI/ADA 87-1995 牙科用印痕盘 Dental Impression Trays
ANSI/ADA 94-1996 牙科用压缩空气质量 Dental Compressed Air Quality
ANSI/ADA 91-1999 牙科硅酸乙酯粘接铸造精密模 Dental Ethyl Silicate Bonded Casting Investments
ANSI PH1.68-1989 摄影(胶卷).口腔牙齿X射线照片尺寸和规格 Photography (Film) - Intraoral Dental Radiographic Films - Size Designations and Dimensions
ANSI/ADA 109-2006 存放牙科汞合金废料法和汞合金废料储存/船载集装箱要求 Procedures for Storing Dental Amalgam Waste and Requirements for Amalgam Waste Storage/Shipment Containers
ANSI/ADA 11-1997 琼脂压印材料 Agar Impression Materials
ANSI/ADA 1-2003 汞齐和牙科汞用合金 Alloy for Amalgam and Dental Mercury
ANSI/ADA 12-2002 托牙基聚合物 Denture Base Polymers
ANSI/ADA 122-2007 牙齿铸型蜡和底板蜡 Dental Casting and Baseplate Waxes
ANSI/ADA 13-1981 假牙冷冻治疗修复树脂 Denture Cold-Curing Repair Resin
ANSI/ADA 14-1982 牙科用铬钴铸造合金 Casting Alloy, Dental Chromium-Cobalt
ANSI/ADA 15-1999 合成聚合物牙齿 Synthetic Polymer Teeth
ANSI/ADA 16-1962 牙科用印模.丁子香酚型氧化锌 Impression Paste, Dental-Zinc Oxide Eugenol Type
ANSI/ADA 17-1983 义齿基托临时更换树脂 Denture Base Temporary Relining Resins
ANSI/ADA 19-2004 牙科学.弹性印模材料 Dentistry - Elastomeric impression materials
ANSI/ADA 2-2002 牙齿石膏粘结熔模铸造 Dental Gypsum-Bonded Casting Investment
ANSI/ADA 24-1991 义齿基板蜡 Dental Baseplate Wax
ANSI/ADA 24and 24a-1991 牙科基板用蜡 Dental Baseplate Wax
ANSI/ADA 30-2000 牙医用氧化锌丁香酚粘固剂和氧化锌非丁香粉粘固剂 Dental Zinc Oxide-Eugenol Cements and Zinc Oxide Non-Eugenol Cements
ANSI/ADA 32-2006 正畸金属丝 Orthodontic Wires
ANSI/ADA 37-2001 牙科用研磨粉 Dental Abrasive Powders
ANSI/ADA 38-2000 金属陶瓷体系 Metal-Ceramic Systems
ANSI/ADA 39-2006 洞和坑封闭剂 Pit and Fissure Sealants
ANSI/ADA 4-1983 牙科用镶嵌模蜡 Dental Inlay Casting Wax
ANSI/ADA 42-2002 牙科磷酸盐粘接铸造精密模 Dental Phosphate-Bonded Casting Investments
ANSI/ADA 5-1997 牙科铸模合金 Dental Casting Alloys
ANSI/ADA 53-1999 聚合物基的牙冠和齿桥材料 Polymer-Based Crown and Bridge Materials
ANSI/ADA 57-2000 牙髓填充材料 Endodontic Sealing Materials
ANSI/ADA 6-1987 牙科用汞 Dental Mercury
ANSI/ADA 62-2005 牙科用磨蚀剂 Dental Abrasive Pastes
ANSI/ADA 69-1999 牙医用陶瓷(同ISO 6872） Dental Ceramic (same as ISO 6872)
ANSI/ADA 75-1997 活动假牙用弹性衬里材料.第1部分:短期材料 Resilient Lining Materials for Removable Dentures - Part 1: Short-Term Materials
ANSI/ADA 80-2001 牙科材料:颜色稳定性测定 Dental Materials: Determination of Color Stability
ANSI/ADA 82-1998 牙科可逆的/不可逆的水状胶质压印材料 Dental Reversible/Irreversible Hydrocolloid Impression Material
ANSI/ADA 88-2000 牙科用青铜合金 Dental Brazing Alloys
ANSI/ADA 92-2002 牙科用磷酸盐粘接难熔压模材料 Dental Phosphate-Bonded Refractory Die Materials
ANSI/ADA 96-2000 牙科用水基凝固剂 Dental Water-Based Cements
ANSI/ADA 97-2002 腐蚀试验方法 Corrosion Test Methods
ANSI/ADA SpecificationNo. 27-2005 基于高聚物的填充物、滋补剂和泥封材料 Polymer-based Filling, Restorative and Luting Materials
ANSI/ADA SpecificationNo. 28-2008 K型牙根管锉和扩孔钻 Root Canal Files and Reamers, Type K
ANSI/ADA SpecificationNo. 41-2005 牙科材料的生物评价用推荐标准实施规程 Recommended Standard Practices for Biological Evaluation of Dental Materials
ANSI/ADA 102-1998 牙医用无菌丁二烯手套 Non-Sterile Nitrile Gloves for Dentistry
ANSI/ADA 103-2001 牙医用无菌增塑聚氯乙烯手套 Non-Sterile Polyvinyl Chloride Gloves for Dentistry
ANSI/ADA 76-2005 牙科用未灭菌天然乳胶手套 Non-Sterile Natural Rubber Latex Gloves for Dentistry
ANSI/ADA 33-2003 牙科术语 Dental Terminology
ANSI/ADA 85Part 1-2004 Disposable Prophy Angles:第1部分 Disposable Prophy Angles: Part 1
ANSI/ADA 93-2000 牙科用铜焊包埋料 Dental Brazing Investments
ANSI/ADA/ISO 3950-1994 牙科学.牙齿和口腔区的名称系统 Dentistry - Designation System for Teeth and Areas of the Oral Cavity
ANSI/AAMI ID54-1996 肠饲喂连接器和适配器 Enteral Feeding Set Connectors and Adapters
ANSI Z80.10-2003 眼科仪器.眼压计.要求 Opthalmics Instruments - Tonometers
ANSI Z80.11-2007 眼角膜再造的激光设备 for Ophthalmics ?Laser Systems for Corneal Reshaping
ANSI Z80.1-2005 眼科.验光用眼科透镜.推荐标准 Ophthalmics ?Prescription Ophthalmic Lenses ?Recommendations
ANSI Z80.17-2001 眼科学.焦距仪 Ophthalmics - Focimeters
ANSI Z80.20-2004 眼科:接触镜片.标准术语、公差、测量方法和物理化学特性 Ophthalmics ?Contact Lenses ?Standard Terminology, Tolerances, Measurements and Physicochemical Properties
ANSI Z80.21-1992 眼测试仪.通用临床视力鉴别图表 Ophthalmics-Instruments- General-Purpose Clinical Visual Acuity Charts
ANSI Z80.2-1989 眼科.硬质隐形眼镜.要求 Ophthalmics - Rigid Contact Lenses - Requirements
ANSI Z80.23-1999 眼科学.角膜形状体系.标准术语.要求 Opthalmics - Corneal Topography Systems - Standard Terminology, Requirements
ANSI Z80.24-2007 眼科光学.眼科光学设备的信息交换 Opthalmic Optics - Information Interchange for Ophthalmic Optical Equipment
ANSI Z80.25-1996 眼科.仪器.基本要求和试验方法 Ophthalmics - Instruments - Fundamental requirements and test methods
ANSI Z80.27-2001 眼科学.青光眼治疗用眼液分流器 Ophthalmics - Aqueous Shunts for Glaucoma Application
ANSI Z80.28-2004 报告眼的光学象差的方法 Ophthalmics - Methods for Reporting Optical Aberrations of Eyes Editorially Revised March 2006
ANSI Z80.3-2001 眼科学.非处方太阳镜和流行眼镜.要求 Ophthalmics Nonprescription Sunglasses and Fashion Eyewear Requirements
ANSI Z80.5-2004 眼科.眼镜架的要求 Ophthalmics - Requirements for Ophthalmic Frames
ANSI Z80.7-2002 眼科学.眼内透镜 Ophthalmic Optics - Intraocular Lenses
ANSI Z80.8-1986 眼科.软质隐形眼镜.处方要求 Ophthalmics - Soft Contact Lenses - Prescription Requirements
ANSI Z80.9-2004 眼科.弱视矫正器.要求 Opthalmics - Low Vision Aids - Requirements
ANSI/ASME PVHO-1-2007 人占用的压力容器的安全标准 Safety Standard for Pressure Vessels for Human Occupancy
ANSI/ASME PVHO-2-2003 压力容器的安全性标准.在有人占用PVHO丙烯酸窗口时容器的安全使用指南 Safety Standard for Pressure Vessel for Human Occupancy In-Service Guidelines for PVHO Acrylic Windows
ANSI/AAMI NS14-1995 可植入的脊髓刺激器 Implantable Spinal Cord Stimulators
ANSI/AAMI NS15-1995 可植入的外周神经刺激器 Implantable Peripheral Nerve Stimulators
ANSI/AAMI RD62-2006 血液透析用水处理设备 Water Treatment Equipment for Hemodialysis Applications
ANSI/AAMI/IEC 60601-2-50-2006 医用电气设备.第2-50部分:婴儿光线疗法设备安全的特殊要求 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment
ANSI/IEEE 1528-2003 人脑对无线通信设备的峰值空间-平均绝对吸收率(SAR)测定的推荐规程:测量技术 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
ANSI/IEEE 1528a-2005 人脑对无线通信设备的峰值空间-平均绝对吸收率(SAR)测定的推荐规程:测量技术.修改1：包括人脑模型(SAM 模型)的CAD文件 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques - Amendment 1: Include CAD File for Human Head Model (SAM Phantom)
ANSI S3.45-1999 前厅基本功能的检测程序 Procedures for Testing Basic Vestibular Function
ANSI/AAMI BP22-1994 血压换能器 Blood Pressure Transducers
ANSI/AAMI EC11-1991 诊断用心电图记录仪 Diagnostic Electrocardiographic Devices
ANSI/AAMI EC11R-1991 诊断用心电图记录装置 Diagnostic Electrocardiographic Devices
ANSI/AAMI EC13-2002 医疗电气设备.第2-27部分:心电图仪用监控设备的基本安全和性能的特殊要求 Medical electrical equipment - Part 2-27: Particular requirements for basic safety and essential performance of electrocardiographic monitoring equipment
ANSI/AAMI EC38-2007 医疗电气设备.第2-47部分:非固定式心电图仪系统的安全(包括基本性能)的特殊要求 Medical electrical equipment - Part 2-47: Particular requirements for the safety, including essential performance, or ambulatory electrocardiographic systems
ANSI/AAMI NS28-1988 颅内压力监测装置 Intracranial Pressure Monitoring Devices
ANSI/AAMI SP10/A1-2003 手册，电子或自动化sphygmomanometers Manual, electronic or automated sphygmomanometers
ANSI/AAMI SP10-2002 手动、电子或自动血压计 Manual, Electronic, or Automated Sphygmomanometers
ANSI/AAMI SP10-2002/A2-2006 ANSI/AAMI SP10-2002的修改件.手动、电子或自动血压计 Amendment to ANSI/AAMI SP10:2002, Manual, electronic or automated sphygmomanometers
ANSI N13.54-2008 核医学中胎儿辐射剂量的计算 Fetal Radiation Dose Calculations in Nuclear Medicine
ANSI N43.17-2002 利用X射线的个人安全性防护系统的辐射安全 Radiation Safety for Personnel Security Screening Systems Using X-Rays
ANSI/AWS B5.15-2003 射线摄影诠释者资格鉴定规范 Specification for the Qualification of Radiographic Interpreters
ANSI/AWS B5.15-2003, Adm 1-2007 射线摄影诠释者资格鉴定用规范 Specification for the Qualification of Radiographic Interpreters
ANSI/AAMI PC69-2007 活性可植入医疗装置.电磁兼容性(EMC).可植入心脏起搏器和可植入心律转复除颤器用EMC试验协议 Active Implantable Medical Devices - Electromagnetic Compatibility - EMC Test Protocols for Implantable Cardiac Pacemakers and Implantable Cardioverter Defibrillators
ANSI/AAMI PAC49-1993 起搏器的应急插入系统 Pacemaker Emergency Intervention System
ANSI/AAMI/ISO 15674-2001 心血管植入物和人造器官.硬壳心脏切开术/静脉储血系统(有无过滤器)和软静脉储血袋 Cardiovascular Implants and Artificial Organs - Hard-Shell Cardiotomy/Venous Reservoir System (with/without filter) and Soft Venous Reservoir Bags
ANSI/AAMI/ISO 15675-2001 心血管植入物和人造器官.心肺旁路系统.动脉血过滤器 Cardiovascular Implants and Artificial Organs - Cardiopulmonary Bypass Systems - Arterial Blood Line Filters
ANSI/AAMI/ISO 25539-1/A1-2003 (ANSI/AAMI/ISO 25539-1-2003的修改件1)心血管植入物.血管内装置.第1部分:血管内修复术:附录E.试验方法 Amendment 1 to ANSI/AAMI/ISO 25539-1:2003, Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses: Annex E - Test methods
ANSI/AAMI/ISO 25539-1-2003 心血管植入物.血管内装置.第1部分:血管内修复体 Cardiovascular Implants - Endovascular Devices - Part 1: Endovascular Prostheses
ANSI/AAMI/ISO 5840-2005 心血管植入物.心脏瓣膜修复 Cardiovascular implants - Cardiac valve prostheses
ANSI/AAMI/ISO 7198-2001 血管移植物修复术 Vascular Graft Prostheses
ANSI/AAMI/ISO 7199-1996 心血管植入和人造器官血液气体交换器(氧气器) Cardiovascular implants and artificial organs- Blood-gas exchangers (oxygenators)
ANSI/ADA 100-2004 正牙托架和管 Orthodontic Brackets and Tubes
ANSI/AAMI ST65-2000 医疗卫生设备用可重复使用的外科纤维术程序 Processing of Reusable Surgical Textiles for Use in Health Care Facilities
ANSI/AAMI/IEC 60601-2-2-2006 医用电气设备.第2-2部分:高频外科手术设备安全性的特殊要求 Medical electrical equipment, Part 2-2: Particular requirements for the safety of high frequency surgical equipment
ANSI/AAMI AT6-2005 自体输血装置 Autologous transfusion devices
ANSI/AAMI BF64-2002 白细胞减数分裂过滤器 Leukocyte Reduction Filters
ANSI/AAMI BF7-1989 输血用微量过滤器 Blood Transfusion Micro-Filters
ANSI/AAMI ID26-2004 医疗电气设备.第2部分:注液泵和控制器安全的特殊要求 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers
ANSI/AAMI RD16-2007 第一次使用的血液透析仪 First-Use Hemodialyzers
ANSI/AAMI RD17-2007 心血管植入物和人造器官.血液透析器、血液过滤器和血液滤净器用体外血液循环 Cardiovascular implants and artificial organs - Extracorporeal blood circuit for haemodialyzers, haemodiafilters and haemofilters
ANSI/AAMI RD47/A1-2003 血液透析器的再利用.修改件1 Reuse of Hemodialyzers Amendment 1
ANSI/AAMI RD47:2002/A1-2003 血液透析器的重复使用.修改件1 Reuse of Hemodialyzers Amendment 1
ANSI/AAMI RD47-2002 血液透析器的再使用 Reuse of Hemodialyzers
ANSI/AAMI RD52/A1-2007 修改件1中血液透析用渗透液.附录C:家用血液透析的特殊考虑 Dialysate for hemodialysis, Amendment 1 - Annex C: Special considerations for home hemodialysis
ANSI/AAMI RD52/A2-2007 修改件2中血液透析用渗透液.附录D:渗透液制备依从建议方法的自我评估 Dialysate for hemodialysis, Amendment 2: Annex D - Self-assessment of compliance with recommendations for dialysate preparation
ANSI/AAMI RD5-2003 血液透析系统 Hemodialysis Systems
ANSI/AAMI RD52-2004 血液透析用透析液 Dialysate for Hemodialysis
ANSI/AAMI RD61-2006 血液透析浓度 Concentrates for Hemodialysis
ANSI/ASTM A908-1996 不锈钢针管规范 Specification for Stainless Steel Needle Tubing
ANSI Z79.8-1979 人用的连续流动麻醉设备的部件和系统.最低性能与安全性要求.包括1982年1月修订 Components and Systems of Continuous-Flow Anesthesia Machines for Human Use, Minimum Performance and Safety Requirements for; Includes Correction January-1982
ANSI/AAMI DF80-2003 医疗电气设备.第2-4部分:心脏去纤颤器安全性的特殊要求(包括自动化的外部去纤颤器) Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators (including automated external defilrillators)
ANSI/AAMI II36-2004 婴儿恒温箱 Infant Incubators
ANSI/AAMI II51-2004 医疗电气设备.第2部分:运输型婴儿保育箱的安全的特殊要求 Medical electrical equipment - Part 2: Particular requirements for safety of transport incubators
ANSI/AAMI/IEC 60601-2-21& 60601-2-21 AMD 1-2000 医疗电气设备.第2部分:婴儿辐射保温箱安全性特殊要求 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infant Radiant Warmers
ANSI/ASSE 6000-2006 医用气体人员的专业资格标准 Professional Qualifications Standard for Medical Gas Personnel
ANSI/ASTM F2173-2002 监测病人呼吸混合物的氧监测器.安全要求 ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements
ANSI/ASTM F2177-2002 ISO 5361,麻醉和呼吸设备.气管导管和连接件 ISO 5361, Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors
ANSI/ASTM F2221-2002 医用抽吸设备.第2部分:手动抽吸设备 Medical Suction Equipment- Part 2: Manually Powered Suction Equipment
ANSI/ASTM F2222-2002 医用抽吸设备.真空或压力源驱动的抽吸设备 Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source
ANSI/ASTM F2265-2003 医用抽吸设备.第1部分:电动抽吸设备.安全要求 Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements
ANSI/ASTM F2288-2003 ISO 5366-1麻醉和呼吸设备的采用.气管造口术用管.第1部分:成人气管造口术用的管材和连接器 Adoption of ISO 5366-1 Anesthetic and Respirator Y Equipment - Tracheostomy Tubes - Part1: Tracheostomy Tubes and Connectors for Use in Adults
ANSI/ASTM F2289-2003 ISO 5366-3麻醉和呼吸设备的采用.气管造口术用管.第3部分:儿科气管造口术用的管材和连接器 Adoption of ISO 5366-3 Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 3: Paediatric Tracheostomy Tubes
ANSI/ASTM F2402-2004 与医疗气体管道系统终端装置相连的流量测量装置.采用ISO 15002作为美国国家标准(有所偏差) Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations)
ANSI/ASTM/ISO 10651-4-2002 医用肺呼吸机.第4部分:操作员控制用人工呼吸机的特殊要求 Lung Ventilators - Part 4: Particular Requirements for Operator-powered Resuscitators
ANSI/ASTM/ISO 10651-5-2006 医用肺呼吸机.基本安全和基本性能的特殊要求.第5部分:气动急救人工呼吸器 Lung Ventilators For Medical use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency resuscitators
ANSI/ASTM/ISO 21647-2006 医疗电气设备.呼吸气体监测器的基本安全性能的特殊要求 Medical Electrical Equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors
ANSI/NFPA 1852-2008 开路独立式呼吸装置(SCBA)的选择、保养和维修标准 Standard on Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
ANSI/AAMI/IEC 60601-1-2,Ed.2-2007 医用电气设备.第1部分:安全一般要求.2间接标准:电磁兼容性.要求和试验 Medical Electrical Equipment - Part 1: General Requirements for Safety - 2. Collateral Standard: Electromagnetic Compatibility - Requirements and Tests
ANSI/AAMI EC53-1995 ECG电缆和导线 ECG Cables and Wires
ANSI/AAMI EC53A-1998 ECGA电缆和导线 ECG Cables and Wires
ANSI/AAMI/ISO 10993-13-1999 医疗器械的生物学评价.第13部分:聚合物医疗器械降解产物的定性与定量 Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymers
ANSI/AAMI/ISO 14971-2007 医疗器械.风险管理.医疗器械风险管理的应用 Medical devices - Risk management - Application of risk management to medical devices
ANSI/AAMI/ISO 10993-14-2001 医疗器械的生物评定.第14部分:来自陶瓷的降解产品的识别和量化 Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics
ANSI/AAMI/ISO 10993-9-1999 医疗器械的生物学评价.第9部分:潜在降解产物的识别与定量总则 Biological evaluation of medical devices-Part 9: Framework for identification and quantification of potential degradation products
ANSI Z136.3-2005 保健设施中激光器的安全使用 Safe Use of Lasers in Health Care Facilities
ANSI/AAMI BE78-2002 医疗设施生物评定.第10部分:刺激作用和致敏作用试验 Biological Evaluation of Medical Devices - Part 10: Tests for Irritation and Sensitization
ANSI/AAMI BE78-2002/A1-2006 医疗设施生物评定.第10部分:刺激作用和迟延型超敏性试验 Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity (Amendment 1)
ANSI/AAMI EC12-2000 可任意使用ECG电极 Disposable ECG electrodes
ANSI/AAMI ES60601-1-2005 医疗电器设备.第一部分:基本安全和实用性的一般要求 Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance
ANSI/AAMI HE74-2001 医疗装置人性因素设计过程 Human Factors Design Process for Medical Devices
ANSI/AAMI/ISO 10993-11-2006 医疗器械的生物评定.第11部分:系统毒性试验(收集在ANSI/AAMI/ISO 10993-1993汇编集中) Biological Evaluation of Medical Devices - Part 11: Tests for Systemic Toxicity (included in ANSI/AAMI/ISO 10993-1993: A collection)
ANSI/AAMI/ISO 10993-1-2003 医学器械的生物学评价.第1部分:试验选择指南 Biological Evaluation of Medical Devices - Part 1: Guidance on Selection of Tests
ANSI/AAMI/ISO 10993-16-1997 医疗器械的生物评定.第16部分:降解产品和可沥滤物质毒性动态研究设计 Biological Evaluation of Medical Devices - Part 16: Toxicokinetic Study Design for Degradation Products and Leachables
ANSI/AAMI/ISO 10993-2-2006 医疗器械的生物评定.第2部分:动物福利要求 Biological evaluation of medical devices - Part 2: Animal welfare requirements
ANSI/AAMI/ISO 10993-3-2003 医疗器械的生物评定.第3部分:基因毒性、致癌作用和生殖毒性的测试 Biological Evaluation of Medical Devices - Part 3: Tests for Genotoxicity, Carcinogenicity and Reproductive Toxicity (included in ANSI/AAMI/ISO 10993-1993: A collection)
ANSI/AAMI/ISO 10993-5-1999 医疗器械的生物学评价.第5部分:实验室细胞毒性试验法 Biological Evaluation of Medical Devices - Part 5: Test for Cytotoxicity: In Vitro Methods (included in ANSI/AAMI/ISO 10993-1993: A collection)
ANSI/AAMI/ISO 14155-2-2003 受治疗人员用医疗器械的临床调查.第二部分：临床调查计划 Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans
ANSI/UL 416-2003 医用冷冻设备标准 Standard for Refrigerated Medical Equipment
ANSI/ASTM E1902-2002 口述、录制和录音播放健康记录的安全保密管理指南 Guide for Mangement of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Record
ANSI/ASTM E2184-2002 保健文件格式规范 Specification for Healthcare Document Formats
ANSI/ASTM E2553-2007 自动通用卫生保健识别系统实施用指南 Guide for the Implementation of a Voluntary Universal Healthcare Identification System
ANSI/HL7 V3 PORT, R 1-2004 HL7第3版标准:管理研究.临床试验实验室成果的周期报告.第1次发行 HL7 Version 3 Standard: Regulated Studies - Periodic Reporting of Clinical Trials Laboratory Results, , Release 1
ANSI/HL7 V3 SPL, R 3-2007 HL7版本3标准:结构化产品标识.第3次发行 HL7 Version 3 Standard: Structured Product Labeling, Release 3
ANSI/ASTM E1633-2007 基于计算机的患者病历编码值规范 Specification for Coded Values Used in Computer-Based Patient Record
ANSI/ASTM E1762-1997 医疗保健信息电子鉴定规范 Specification for Electronic Authentication of Health Care Information
ANSI/NFPA 1583-2007 消防队员有关健康适应性规划的标准 Standard on Health-Related Fitness Programs for Fire Fighters
ANSI/CAP SNOMED-1-2003 医疗保健术语结构 Healthcare Terminology Structure
ANSI/ASTM E2564-2007 用直接显微镜计数(dmc)法进行金属加工流体中分支杆菌计数的试验方法 Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (dmc) Method
ANSI/ASTM F1356-2008 控制新鲜和冷冻瘦肉和家禽病原体和其它微生物的辐照指南 Guide for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
ANSI/AAMI/ISO 11737-3-2004 医疗器械的消毒.微生物方法.第3部分:生物负载数据的评估和解释指南 Sterilization of medical devices - Microbiological methods - Part 3: Guidance on evaluation and interpretation of bioburden data
ANSI/NSF 49(i11)-2006 II级(层流)生物安全细木家具 Class II (laminar flow) biosafety cabinetry
ANSI/NSF 49(i5)-2002 II级(层流)生物危害储藏橱 Class II (Laminar Flow) Biohazard Cabinetry
ANSI/NSF 49(i7)-2004 II级(层流)生物安全储藏橱 Class II (laminar flow) Biosafety Cabinetry
ANSI/NSF 49(i9)-2005 II级(层流)生物安全室 Class II (laminar flow) biosafety cabinetry
ANSI/NSF 49-2002 二级(层流)生物危害的细木家具 Class II (Laminar Flow) Biohazard Cabinetry
ANSI/AAMI ST 72-2002 细菌内毒素.试验方法学、日常检测和交替性批量测试 Bacterial endotoxins - Test methodologies,routine monitoring,and alternatives to batch testing
ANSI/SBS 1-2004 圏枋."脚印图"尺寸 Microplates - Footprint Dimensions
ANSI/SBS 2-2004 小型板.高度尺寸 Microplates - Height Dimensions
ANSI/SBS 3-2004 小型板.底部外缘尺寸 Microplates - Bottom Outside Flange Dimensions
ANSI/SBS 4-2004 小型板.井位置 Microplates - Well Positions
ANSI/ASME BPE-2007 生物处理设备 Bioprocessing Equipment
ANSI/ASTM E1940-2004 无菌释放计划用昆虫辐照剂量测定的指南 Guide for Dosimetry for Irradiation of Insects for Sterile Release Programs
ANSI/ASTM E2097-2000 完全氧燃烧热量测量火灾试验惯例 Practice for Full Scale Oxygen Consumption Calorimetry Fire Tests
ANSI/ASTM D5032-2003 用含水甘油溶液维护恒定相对湿度的实施规范 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ANSI/ASHRAE 169-2006 用于建筑设计的气象资料标准 Weather Data for Building Design Standards
ANSI/ASHRAE 169a-2006 建筑物设计标准的天气数据 Weather Data for Building Design Standards
ANSI/ANS 3.11-2005 用核能设备测定气象信息 Determining Meteorological Information at Nuclear Facilities
ANSI S1.26-1995 大气吸声的计算方法 Method for calculation of the absorption of sound by the atmosphere
ANSI/ASTM D4023-1982 湿度测量术语 Terminology Relating to Humidity Measurements
ANSI/INCITS/ISO/IEC 19101-2002 地理信息.参考模型 Geographic information - Reference model
ANSI/INCITS/ISO/IEC 19105-2000 地理信息.符合性及试验 Geographic Information - Conformance and Testing
ANSI/INCITS/ISO/IEC 19133-2005 地理学信息.特定区域服务.跟踪和导航 Geographic information - Location-based services - Tracking and navigation
ANSI/ISO 19101-2002 地理信息.参考模型 Geographic information - Reference model
ANSI/ASTM E1488-2002 制定和运用试验方法用统计程序的测试方法 Test Method for Statistical Procedures to Use in Developing and Applying Test Methods
ANSI/ASTM E2232-2002 辐射处理中被吸收剂量计算方法选用指南 Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
ANSI/AMCA 301-2006 试验室试验数据的风扇声波速度计算方法 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/AIAA S-061-1998 商业发射安全 Commercial Launch Safety
ANSI D20.1-1993 交通记录系统数据元词典 Data element dictionary for traffic records systems
ANSI D20-2002 交通记录系统的数据元字典 Data Element Dictionary for Traffic Records Systems
ANSI N14.27-2005 高速公路运输事故中承运人和托运人的责任和紧急应对措施 Carrier and Shipper Responsibilities and Emergency Response Procedures for Highway Transportation Accidents
ANSI N14.27-200x-2005 高速公路运输事故中承运人和托运人的责任和紧急应对措施 Carrier and Shipper Responsibilities and Emergency Response Procedures for Highway Transportation Accidents
ANSI/NSC D16.1-2007 汽车交通事故的分类手册.第6版 Manual on Classification of Motor Vehicle Traffic Accidents, Sixth Edition
ANSI/IEEE 1512.1-2006 供急救管理中心用常见交通事故管理电文集的标准 Standard for Common Traffic Incident Management Message Sets for Use by Emergency Management Centers
ANSI/INCITS/ISO 19134-2007 地理信息.服务场所.多模型路径和导航 Geographic information - Location-based services - Multimodal routing and navigation
ANSI/SCTE 118-2-2007 节目规定广告插入.交通通信应用数据模型内容供应商 Program-Specific Ad Insertion - Content Provider to Traffic Communication Applications Data Model
ANSI/IEEE 1484.1-2003 学习技术标准.学习技术系统体系结构(LTSA) Standard for Learning Technology - Learning Technology Systems Architecture (LTSA)
ANSI/NIST-ITL 1-2007 指纹、面部和其他生物统计信息交换的数据格式 Data Format for the Interchange of Fingerprint, Facial, & Other Biometric Information
ANSI/ASTM E1986-1998 访问健康信息特殊授权 Information Access Privileges to Health Information
ANSI/ASTM E1987-1998 健康信息个体使用权指南 Guide for Individual Rights Regarding Health Information
ANSI/ASTM E1988-1998 访问健康信息人员培训指南 Guide for Training of Persons Who Have Access to Health Information
ANSI/EIA 557-1989 统计过程控制系统 Statistical Process Control Systems
ANSI/EIA 557A-1995 统计过程控制系统 Statistical Process Control Systems
ANSI/EIA-557-B-2006 统计过程控制系统 Statistical Process Control Systems
ANSI/ASTM D6299-2007 分析测量系统性能评估用应用统计质量保证技术的实施规程 Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ANSI/ASTM E122-2007 评估带指定允许误差的一批产品或一次加工过程特性曲线均值的样品尺寸计算用实施规程 Practice for Calculating Sample Size to Estimate, with a Specified Tolerable Error, the Average for a Characteristic of a Lot or Process
ANSI/ASTM E141-1997 根据概率取样结果进行数据验收的惯例 Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ANSI/ASTM E178-2002 海面观察惯例 Practice for Dealing with Outlying Observations
ANSI/ASTM E1994-1998 面向过程的平均质量检查下限和批量允许不良率的抽样方案使用惯例 Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ANSI/ASTM E2284-2003 当样品中出现零反应时使用属性数据为不合格项的系数或数量或不合格发生率设定上置信限的实施规范 Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-conforming Items, or a Rate of Occurence for Non-conformities, Using Attribute Data, When There Is a Zero Response in the Sample
ANSI/ASTM E2334-2003 样品中存在零响应时,使用属性数据为不合格项目的分数或数或不合格项目发生率设定上限置信区的实施规程 Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-conforming Items, or a Rate of Occurence for Non-conformities, Using Attribute Data, When There Is a Zero Response in the Sample
ANSI/ASTM E2586-2007 计算和基本统计用实施规程 Practice for Calculating and Using Basic Statistics
ANSI/ISO 21247-2007 产品验收用组合验收零取样系统和过程控制程序 Combined accept-zero sampling systems and process control procedures for product acceptance
ANSI/ISO 2859-1-1999 计数抽样检验程序.第1部分:用于逐批检验按可接受质量界限(AQL)检索的抽样计划 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ANSI/ISO 2859-4-2002 计数抽样检验程序.第4部分:申报质量等级的评定程序 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
ANSI/ASTM D6300a-2007 石油产品和润滑剂试验方法中使用的精确度和偏差数据测定的实施规程 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ANSI/EIA 599-A-1998 国家电子工艺认证标准 National Electronic Process Certification Standard
ANSI/EIA-599-A-1998 国家电子工艺认证标准 National Electronic Process Certification Standard
ANSI/ASTM/ISO/IEC 17020-1998 各类检查机构运行的通用标准 General Criteria For the Operation of Various Types of Bodies Performing Inspection
ANSI/NCSL Z540.2-1997 不确定度表示用美国国家标准.测量中不确定度表示用美国指南 American National Standard for Expressing Uncertainty - U.S. Guide to the Expression of Uncertainty in Measurement
ANSI/ASME QRO-1-2005 资源回收设施操作人员的资格鉴定和认证 Qualification and Certification of Resource Recovery Facility Operators
ANSI/ASME QHO-1-2004 危险废物焚烧炉操作人员的资格鉴定和认证 Qualification and Certification of Hazardous Waste Incinerator Operators
ANSI/ASTM E2212-2002 健康管理证书政策惯例 Practice for Healthcare Certificate Policy
ANSI/ASQ/ISO Q10012-2003 评估管理系统.测量过程和测量设备要求 Measurement management systems -Requirements for measurement processes and measuring equipment
ANSI/ASQC Z1.11-1996 质量保证标准.关于教育和培训机构的ANSI/ISO/ASQC Q9001或9002的应用导则 Quality Assurance Standards - Guidelines for the Application of ANSI/ISO/ASQC Q9001 or Q9002 to Education and Training Institutions
ANSI/ASTM E1224-1996 实验室认可能力类别分区指南 Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes
ANSI/ASTM E1301-1996 实验室验证试验程序的制定和运行指南 Guide for Development and Operation of Laboratory Proficiency Testing Programs
ANSI/ASTM E541-2001 建造建筑物系统分析和符合性保证从业机构资质准则 Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
ANSI/ASTM E994-1996 实验室认可制度校正和试验操作和认可指南 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition
ANSI/ASTM/ISO/IEC 17011-2004 合格评估.认可合格评定机构的认可机构的一般要求 Conformity Assessment - General Requirements for Accreditation bodies Accrediting Conformity Assessment Bodies
ANSI/ASTM/ISO/IEC 17024-2005 合格评定.人员认证机构的一般要求 Conformity assessment - General requirements for bodies operating certification of persons
ANSI/ISO TS29001/API SPEC Q 1-2007 石油、石化和天然气工业.部门专用质量管理系统.产品和服务机构的要求 Petroleum, petrochemical & natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organization
ANSI/ISO/ASQ QE19011S-2004 质量和/或环境管理系统审核指南.附加的补充指南US版 Guidelines for Quality and/or Environmental Management Systems Auditing - US Version with Supplemental Guidance Added
ANSI/ISO/IEC 17025-2005 检测和校准实验室能力的一般要求 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI A10.42-2000 建筑工业中起重设备的合格鉴定和可靠性 Rigging Qualifications and Responsibilities in the Construction Industry
ANSI/SAE J2162-1998 火花塞热等级分类 Spark Plug Heat Rating Classifications
ANSI/IPC A-600-F-1999 印制板的可接受性 Acceptability of Printed Boards
ANSI/IPC A-610B-1995 印制电路板组件的可接受性 Acceptability of Printed Board Assemblies

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点