畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI Z83.3a Addenda-1972 大型锅炉的气体使用设备.补充件 Gas utilization equipment in large boilers; Addenda 91.140.40
ANSI Z83.3b Addenda-1976 大型锅炉的气体使用设备.补充件 Gas utilization equipment in large boilers; Addenda 91.140.40
ANSI Z83.6b Addenda-1993 燃气红外线加热器.补充件 Gas-fired infrared heaters; Addenda 91.140.40
ANSI Z83.7a Addenda-1991 建筑物的燃气加热器.补充件 Gas-fired construction heaters; Addenda 91.140.40
ANSI Z83.7b Addenda-1993 建筑物燃气加热器.补充件 Gas-fired construction heaters; Addenda 91.140.40
ANSI Z83.8a Addenda-1990 气体装置加热器.补充件 Gas unit heaters; Addenda 91.140.40
ANSI/ASTM F1704-1999 商业厨房通风系统性能试验方法 Test Method for the Performance of Commercial Kitchen Ventilation Systems 91.140.30;97.040.99
ANSI/ACCA 3Manual S-2004 住宅用设备选择 Residential Equipment Selection 91.140.30;91.140.10
ANSI/ASHRAE 86-1994 制冷级油的絮凝点的试验方法 Method of Testing the Floc Point of Refrigeration Grade Oil 91.140.30;75.100
ANSI/ASHRAE 41.4-1996 液体制冷剂中润滑油比例的测量方法 Method for Measurement of Proportion of Lubricant in Liquid Refrigerant 91.140.30;71.100.45
ANSI/ASHRAE 63.1-1995 液体管路制冷剂干燥器的试验方法 Methods of Testing Liquid Line Refrigerant Driers 91.140.30;71.100.45
ANSI/NSF 37(i1r2-3)-2005 食品和食品服务企业入口通道用风帘 Air Curtains for Entranceways in Food and Food Service Establishments 91.140.30;67.020
ANSI/NSF 37-2002 食品和食品服务企业入口通道用风帘 Air Curtains for Entranceways in Food and Food Service Establishments 91.140.30;67.020
ANSI/ARI 500-2001 空气调节和热泵设施用不同容积的容积式冷冻剂压缩机和压缩机部件 Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump Applications 91.140.30;27.080
ANSI/ASHRAE 37-2005 电动整体空调和热泵设备的额定值试验方法 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment 91.140.30;19.020
ANSI/ASHRAE 41.1-1986 温度的标准测量法 Temperature Measurement, Standard Method for 91.140.30;17.200.01
ANSI/NFPA 92B-2005 林荫道、前厅和大空间内烟雾控制系统标准 Standard for Smoke Management Systems in Malls, Atria, and Large Spaces 91.140.30;13.220.20
ANSI/AIHA Z9.5-2002 实验室通风 Laboratory Ventilation 91.140.30;11.080.01
ANSI/ASHRAE 134-2005 加热、通风、空调和制冷系统用图形符号 Graphic Symbols for Heating, Ventilating, Air-Conditioning and Refrigerating Systems 91.140.30;01.080.30
ANSI Man "D"/ACCA 1-2002 住宅管道的设计 Residential Duct Design 91.140.30
ANSI Man"D"/ACCA 1-2002 住宅管道设计 Residential Duct Design 91.140.30
ANSI Z21.10.3-2004 容量Ⅲ、每小时额定输入大于75000Btu的循环式瞬时贮水式燃气热水器 Gas Water Heaters, Volume III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous (Same as CSA 4.3) 91.140.30
ANSI Z21.10.3a-2005 燃气式热水器.卷III.输入额定值为每小时75,000Btu以上的存储式循环与瞬时水加热器(与 CSA 4.3 相同) Gas Water Heaters, Volume III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous (Same as CSA 4.3) 91.140.30
ANSI Z21.66-1996 与燃气器具一起使用的自动通风气门设备(同CGA 6.14) Automatic Vent Damper Devices for Use with Gas-Fired Appliances (same as CGA 6.14) 91.140.30
ANSI Z83.4-2003 非循环直接燃气式工业气体加热器 Non-Recirculating Direct Gas-Fired Industrial Air Heaters (same as CGA 3.7) 91.140.30
ANSI Z83.4a-2004 非循环直接燃气式工业用气体加热器 Non-Recirculating Direct Gas-Fired Industrial Air Heaters (same as CGA 3.7a) 91.140.30
ANSI Z83.4b-2005 工业用不可再循环的直接燃气式气体加热器 Non-Recirculating Direct Gas Fired Industrial Air Heaters 91.140.30
ANSI/ACCA 6HVAC System Cleanliness-2007 恢复暖通空调系统的清洁度 Restoring the Cleanliness of HVAC Systems 91.140.30
ANSI/AHAM AC-1-2006 便携式家用室内空气清洁器性能的测量方法 Method for Measuring Performance of Portable Household Electric Room Air Cleaners 91.140.30
ANSI/AHAM DH-1-1986 减湿器 Dehumidifiers 91.140.30
ANSI/AHAM RAC-1-1982 房间空气调节器 Room Air Conditioners 91.140.30
ANSI/ARI 365-2002 商业与工业用单体空气调节冷凝装置 Commercial and Industrial Unitary Air-Conditioning Condensing Units 91.140.30
ANSI/ARI 430-1999 中心站空调设备 Central Station Air-Handing Units 91.140.30
ANSI/ARI 610-2004 中央系统加湿器的性能等级 Performance Rating of Central System Humidifiers 91.140.30
ANSI/ARI 620-2004 住宅用自主式加湿器的性能评定 Performance Rating of Self-Contained Humidifiers for Residential Applications 91.140.30
ANSI/ARI 640-1996 商用和工业用加湿器 Commercial and Industrial Humidifiers 91.140.30
ANSI/ARI 680-2004 住宅空气过滤设备性能额定值 Performance Rating of Residential Air Filter Equipment 91.140.30
ANSI/ARI 850-2004 商用和工业用空气过滤设备性能额定值 Performance Rating of Commercial and Industrial Air Filter Equipment 91.140.30
ANSI/ASHRAE 111-2008 建筑采暖通风和空调系统的测量、测试、调节和平衡 Measurement, Testing, Adjusting and Balancing of Building HVAC Systems 91.140.30
ANSI/ASHRAE 113-2005 室内空气扩散的测试方法 Method of Testing for Room Air Diffusion 91.140.30
ANSI/ASHRAE 118.1-2008 燃气、电力和燃油热水器额定值的测试方法 Method of Testing for Rating Commercial Gas, Electric, and Oil Service Water Heating Equipment 91.140.30
ANSI/ASHRAE 119-1988 独立一家一户住宅空气漏泄性能 Air Leakage Performance for Detached Single-Family Residential Buildings 91.140.30
ANSI/ASHRAE 120-1999 测定HVAC通气道及接头的气流阻力的试验方法 Methods of Testing to Determine Flow Resistance of HVAC Air Ducts and Fittings 91.140.30
ANSI/ASHRAE 124-2007 空间加热器和热水器结合的额定值用测试方法 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances 91.140.30
ANSI/ASHRAE 125-1992 HVAC系统中液流热能测试方法 Method of Testing Thermal Energy for Liquid Streams in HVAC Systems 91.140.30
ANSI/ASHRAE 127-2007 计算机与数据处理间单体气调节器分级的测试方法 Method of Testing for Rating Computer and Data Processing Room Unitary Air-Conditioners 91.140.30
ANSI/ASHRAE 128P-2001 单体空调器的评价方法 Methods of Rating Unitary Spot Air Conditioners 91.140.30
ANSI/ASHRAE 129-1997 空气交换效果的测量 Measuring Air-Change Effectiveness 91.140.30
ANSI/ASHRAE 130-2008 空气终端装置的测试方法 Methods of Testing Air Terminal Units 91.140.30
ANSI/ASHRAE 133P-2001 直接蒸发气体冷却器的试验方法 Method of Testing Direct Evaporative Air Coolers 91.140.30
ANSI/ASHRAE 136-1993 独立住宅空气交换率测定方法 A Method of Determining Air Change Rates in Detached Dwellings 91.140.30
ANSI/ASHRAE 137-1995 包含一个减温热水器的空调器/水加热设备的效率测试方法 Methods of Testing for Efficiency of Space-Conditioning/Water-Heating Appliances that Include a Desuperheater Water Heater 91.140.30
ANSI/ASHRAE 139-2007 再生工艺利用热评定干燥剂减湿器的测试方法 Methods of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for the Regeneration Process 91.140.30
ANSI/ASHRAE 149-2000 烟尘管理系统中排气扇测试的实验室方法 Laboratory Methods of Testing Fans Used to Exhaust Smoke in Smoke Management Systems 91.140.30
ANSI/ASHRAE 15-2001 机械制冷安全规程 Safety Code for Mechanical Refrigeration 91.140.30
ANSI/ASHRAE 158.1-2004 制冷电磁阀的容量试验方法 Methods of Testing Capacity of Refrigerant Solenoid Valves 91.140.30
ANSI/ASHRAE 15a-2007 制冷系统安全标准 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 15Addendum b-2008 安全标准的制冷系统 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 15Addendum e-2008 安全标准的制冷系统 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 15b-2006 制冷系统安全标准 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 15c-2007 制冷系统安全标准 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 15d-2008 制冷设备的安全标准 Safety Standard for Refrigeration Systems 91.140.30
ANSI/ASHRAE 16-1983 定评室内空调器及组装式终端空调器的测试方法 Room Air Conditioners and Packaged Terminal Air Conditioners, Method of Testing for Rating 91.140.30
ANSI/ASHRAE 18-2006 定评自备机械制冷系统的饮水冷却器的的测试方法 Method of Testing for Rating Drinking-Water Coolers with Self-Contained Mechanical Refrigeration Systems 91.140.30
ANSI/ASHRAE 20-1997 评定 Methods of Testing for Rating Remote Mechanical-Draft Air-Cooled Refrigerant Systems 91.140.30
ANSI/ASHRAE 22-2007 评定水冷式冷冻冷凝器的测试方法 Methods of Testing for Rating Water-Cooled Refrigerant Condensers 91.140.30
ANSI/ASHRAE 23-2005 容积式冷冻剂压缩机和冷凝部件的额定值试验方法 Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units 91.140.30
ANSI/ASHRAE 25-2001 用于制冷的强制性交换与自然交换空气冷却器测试方法 Methods of Testing Forced Convection and Natural Convection Air Coolers for Refrigeration 91.140.30
ANSI/ASHRAE 26-1996 船上机械制冷和空调装置 Mechanical Refrigeration and Air-Conditioning Installations Aboard Ship 91.140.30
ANSI/ASHRAE 28-1996 制冷剂毛细管流量测试方法 Method of Testing Flow Capacity of Refrigerant Capillary Tubes 91.140.30
ANSI/ASHRAE 40-2002 降温用温控单元空调设备评定的测试方法 Heat Operated Unitary Air-Conditioning Equipment for Cooling, Methods of Testing for Rating 91.140.30
ANSI/ASHRAE 41.6-1994 潮湿空气特性的测量方法 Method for Measurement of Moist Air Properties 91.140.30
ANSI/ASHRAE 52.2-1999 通过粒度测试通用通风空气净化设备排除效率的测试方法 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size 91.140.30
ANSI/ASHRAE 52.2a-2006 通过粒度测试通用通风空气净化设备排除效率的测试方法 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size 91.140.30
ANSI/ASHRAE 55a-2008 人类居住热环境条件 Thermal Environmental Conditions for Human Occupancy 91.140.30
ANSI/ASHRAE 62.1-2004 合格的室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1a-2006 通风和验收户内空气质量 Ventilation and Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1b-2007 合格室内空气质量用通风系统 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1c-2006 合格的室内空气质量用通风系统 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1d-2006 验收户内空气质量用通风系统 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1e-2007 达标室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1f-2006 达标室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.1g-2006 检验室内空气质量用通风设备.修改件g Ventilation for Acceptable Indoor Air Quality, Addenda g 91.140.30
ANSI/ASHRAE 62.1h-2007 达标室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62.2a-2004 低层住宅建筑物的通风和合格的室内空气质量.修改件a Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings, Addendum a 91.140.30
ANSI/ASHRAE 62.2b-2004 低层住宅建筑物的通风和合格的室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2e-2007 低层住宅建筑中的通风设备和达标室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2g-2006 低层住宅建筑物的通风及合格的室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2h-2007 低层住宅建筑中的通风设备和达标室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2i-2007 低层住宅建筑中的通风设备和达标室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2k-2007 低层住宅建筑物中的通风和可接受室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62.2P-2003 低层住宅建筑物中的通风和可接受的室内空气质量 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings 91.140.30
ANSI/ASHRAE 62-2001 达标的室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62aa-2004 达标的室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62ae-2003 通风和可接受的室内空气质量 Ventilation and Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62af-2003 商业、机关团体的和高层住宅建筑物的通风和达标的室内空气质量.附录af Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda af 91.140.30
ANSI/ASHRAE 62h-2003 达标的室内空气质量用通风设备.补充件h Ventilation for Acceptable Indoor Air Quality, Addenda h 91.140.30
ANSI/ASHRAE 62i-2002 为达到可接受的室内空气质量而进行的通风(附录i) Ventilation for Acceptable Indoor Air Quality (Addenda i) 91.140.30
ANSI/ASHRAE 62k-2002 能达到满意的室内空气质量的通风设备,附录K Ventilation for Acceptable Indoor Air Quality, Addenda k 91.140.30
ANSI/ASHRAE 62n-2004 商用、公共机构和高层住宅建筑物的通风和达标的室内空气质量.补充件n Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda n 91.140.30
ANSI/ASHRAE 62o-2003 合格室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62r-2003 商业、机关团体的和高层住宅建筑物的通风和达标的室内空气质量.附录r Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda r 91.140.30
ANSI/ASHRAE 62t-2002 为达到可接受的室内空气质量而进行的通风 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62u-2002 为达到可接受的室内空气质量而进行的通风 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62v-2002 为达到可接受的室内空气质量而进行的通风(附录v) Ventilation for Acceptable Indoor Air Quality, Addenda v 91.140.30
ANSI/ASHRAE 62x-2003 合格的室内空气质量的通风 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62y-2004 达标的室内空气质量用通风设备 Ventilation for Acceptable Indoor Air Quality 91.140.30
ANSI/ASHRAE 62z-2003 商业、机关团体和高层住宅建筑物的通风和达标的室内空气质量.附录z Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda z 91.140.30
ANSI/ASHRAE 64-2005 遥控式机械通风的蒸发式制冷剂凝结器的额定值试验方法 Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers 91.140.30
ANSI/ASHRAE 70P-2006 空气出口和进口试验性能方法 Method of Testing the Performance of Air Outlets and Air Inlets 91.140.30
ANSI/ASHRAE 79-2002 确定室内风机盘管空调器额定值的测试方法 Methods of Testing for Rating Room Fan-Coil Air Conditioners 91.140.30
ANSI/ASHRAE 84-2008 空气-空气式热交换器的测试方法 Method of Testing Air-to-Air Heat/Energy Exchangers 91.140.30
ANSI/ASHRAE 87.3P-2001 螺旋桨通风机风扇振动试验方法.诊断试验方法 Method of Testing Propeller Fan Vibration - Diagnostic Test Methods 91.140.30
ANSI/ASHRAE/SMACNA 126-2008 HVAC空气管道的试验方法 Methods of Testing HVAC Air Ducts 91.140.30
ANSI/ASTM E2320-2004 热环境和室内空气条件下用办公室设施的适用性分类 Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions 91.140.30
ANSI/ASTM F1005-1997 采暖、通风与空调导管形状惯例.设计技术状态标识和描述 Practice for HVAC Duct Shapes; Identification and Description of Design Configuration 91.140.30
ANSI/NFPA 90A-2002 空气调节和通风系统的安装 Installation of Air Conditioning and Ventilating Systems 91.140.30
ANSI/UL 181-2005 厂制风管和风管接头的安全标准 The Standard for Safety for Factory-Made Air Ducts and Air Connectors 91.140.30
ANSI/UL 181A-2008 与刚性风管一起使用的密闭系统的安全标准 Standard for Safety for Closure Systems for Use with Rigid Air Ducts 91.140.30
ANSI/UL 181B-2008 与柔性风管和风管接头一起使用的密闭系统的安全标准 Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors 91.140.30
ANSI/UL 1978-2005 润滑脂管道的安全标准 Standard for Safety for Grease Ducts 91.140.30
ANSI/UL 1996-2006 电气管道加热器的安全标准 Standard for Safety for Electric Duct Heaters 91.140.30
ANSI/UL 474-2004 减湿器 Dehumidifiers 91.140.30
ANSI/UL 484-2007 房间空气调节器的安全标准 Standard for Safety for Room Air Conditioners 91.140.30
ANSI/UL 998-2006 增湿器安全性标准 Standard for Safety for Humidifiers 91.140.30
ANSI Z21.48a Addenda-1993 重力型和风扇型燃气落地炉.补充件 Gas-fired gravity and fan type floor furnaces; Addenda 91.140.20;27.060.20
ANSI Z21.49a Addenda-1993 重力型和风扇型通风的燃气壁炉.补充件 Gas-fired gravity and fan type vented wall furnaces; Addenda 91.140.20;27.060.20
ANSI Z21.50a Addenda-1990 通风的豪华型体气器具.补充件 Vented decorative gas appliances; Addenda 91.140.20;27.060.20
ANSI Z21.50b Addenda-1990 通风的豪华型气体器具.补充件 Vented decorative gas appliances; Addenda 91.140.20;27.060.20
ANSI/UL 834-2004 电加热供水动力锅炉 Electrical Heating, Water Supply, and Power Boilers 91.140.10;91.140.65
ANSI/ACCA 4HVAC-2007 维修住宅暖通空调系统 Maintenance of Residential HVAC Systems 91.140.10;91.140.30
ANSI/ARI 390-2003 定义单机组立式空调机和加热泵性能 Performance Rating of Single Package Vertical Air-Conditioners and Heat Pumps 91.140.10;91.140.30
ANSI/NFPA 90B-2006 热空气加热器和空调系统的安装标准 Standard for the Installation of Warm Air Heating and Air-Conditioning Systems 91.140.10;91.140.30
ANSI Z21.11.2-2007 燃气房间加热器.卷II、非通风房间加热器 Gas-Fired Room Heaters - Volume II, Unvented Room Heaters 91.140.10
ANSI Z21.11.2a-2008 燃气室加热器用标准.卷II、不通风房间加热器 Standard for Gas-Fired Room Heaters, Volume II, Unvneted Room Heaters 91.140.10
ANSI Z21.11.2b-2004 燃气式房间加热器(容积为II的无排气口房间加热器) Gas-Fired Room Heaters, Vol. II, Unvented Room Heaters 91.140.10
ANSI Z21.13-2004 燃气低压蒸汽锅炉和热水锅炉 Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9) 91.140.10
ANSI Z21.13b-2007 燃气低压蒸汽锅炉和热水锅炉 Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9b) 91.140.10
ANSI Z21.17-1998 家用煤气转换燃烧器 Domestic Gas Conversion Burners 91.140.10
ANSI Z21.17a-2008 家用燃气转换燃烧器 Domestic Gas Conversion Burners 91.140.10
ANSI Z21.47-2006 燃气集中供热炉(同CSA 2.3) Gas-Fired Central Furnaces (same as CSA 2.3) 91.140.10
ANSI Z21.47a-2007 燃气中心炉(与CSA 2.3a-200x相同) Gas-Fired Central Furnaces (same as CSA 2.3a-200x) 91.140.10
ANSI Z21.84-2002 固体燃料壁炉安装用手动照明、天然气装饰型燃气器具 Manually Lighted, Natural Gas Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces 91.140.10
ANSI Z21.84b-2004 固体燃料壁炉中安装的手工点燃式装饰性燃气装置 Manually Lighted Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces 91.140.10
ANSI Z21.91-2007 燃气非通风装饰性房间加热器用非通风燃烧室外壳 Ventless Firebox Enclosures for Gas-Fired Unvented Decorative Room Heaters 91.140.10
ANSI/ACCA 8Man J 2 Section 28-2006 夏季制冷负荷水分迁移 Moisture Migration Load for Summer Cooling 91.140.10
ANSI/ACCA ManJ 2 Addendum B-2004 MJB的AED协议修订版 AED Protocol Revisions to MJ8 91.140.10
ANSI/ACCA ManJ 2 Addendum C-2004 MJB的管道阻力增益/损失修订版 Duct Gain/Loss Revisions to MJ8 91.140.10
ANSI/ACCA ManJ 2 Addendum D-2004 MJB的渗流增益/损失修订版 Infiltration Gain/Loss Revisions to MJ8 91.140.10
ANSI/ACCA ManJ 2-2004 住宅用加热和制冷负载计算的标准 Standard for Residential Heating and Cooling Load Calculations 91.140.10
ANSI/API 573-2003 裂解炉和加热炉的检验 Inspection of Fired Boilers and Heaters 91.140.10
ANSI/ASHRAE 103P-2007 测试方法为每年的燃料利用效率的住宅中央火炉和锅炉 Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers 91.140.10
ANSI/ASHRAE 105-2007 测量、表达和比较建筑物能量性能的标准方法 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance 91.140.10
ANSI/ASHRAE 152P-2004 住宅用热配送系统的设计和季节性效应测定的试验方法 Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems. 91.140.10
ANSI/ASHRAE/ACCA 183P-2007 除低层住宅建筑外的建筑物冷热负荷计算的极值 Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings 91.140.10
ANSI/ASME A112.4.1-1993 热水器安全阀排水管 Water Heater Relief Valve Drain Tubes 91.140.10
ANSI/ASTM F1369-1993 热水蒸汽对流加热器规范 Specification for Heaters, Convection, Steam and Hot Water 91.140.10
ANSI/UL 391-2006 烧固体燃料和组合燃料的中心和辅助炉的安全标准 Standard for Safety for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces 91.140.10
ANSI/UL 574-2004 燃油电加热器 Electric Oil Heaters 91.140.10
ANSI/NSF 50(i21)-2007 游泳池、温泉/热浴盆用循环系统部件和相关材料 Circulation system components and related materials for swimming pools, spas/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i30)-2005 游泳池和水疗中心/热浴盆用循环系统部件和相关材料 Circulation system components and related materials for swimming pools, spas/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i33)-2005 游泳池、水疗中心/热浴盆用循环系统元部件和相关材料 Circulation system components and related materials for swimming pools, spas/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i35)-2007 游泳池、温泉/热水浴缸用循环系统部件和相关材料 Circulation system components and related materials for swimming pools, spas/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i37)-2008 游泳池和水疗中心/热浴盆用循环系统部件和相关材料 Circulation system components and related materials for swimming pools, spa/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i39)-2006 游泳池、温泉/热水浴缸用循环系统部件和相关材料 Circulation system components and related materials for swimming pools, spa/hot tubs 91.140.01;97.220.10
ANSI/NSF 50(i40)-2006 游泳池、水疗中心/热浴盆用循环系统元部件和相关材料 Circulation system components and related materials for swimming pools, spas/hot tubs 91.140.01;97.220.10
ANSI/NSF 50-2005 游泳池、水疗中心/热浴盆用循环系统部件和相关材料 Circulation System Components and Related Materials for Swimming Pools, Spas/Hot Tubs 91.140.01;97.220.10
ANSI/NSF 24-1988 用于活动房屋和游乐车的卫生管道系统零件 Plumbing System Components for Manufactured Homes and Recreational Vehicles 91.140.01;43.100
ANSI/ASSE 1012-2002 有中气压通风口的防回流装置的性能要求 Performance Requirements for Backflow Preventer with Intermediate Atmospheric Vent 91.140.01;23.060.50
ANSI/ASHRAE 94.1-2002 按热性能检测有效潜热存储装置的方法 Method of Testing Active Latent-Heat Storage Devices Based on Thermal Performance 91.140.01;17.200.10
ANSI/ASHRAE 94.2-1989 基于热性能的电气输入和热输出装置的试验方法 Devices with Electrical Input and Thermal Output Based on Thermal Performance, Methods of Testing 91.140.01;17.200.10
ANSI Z21.40.4 and Z 21.40.4a-1998 性能测试和评级，燃气，空调和热泵设备（相同的CGA 2.94a ） Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (same as CGA 2.94a) 91.140.01
ANSI/ASHRAE 94.3-1986 有效的灵敏蓄热装置的以热性能为基础的试验方法 Active Sensible Thermal Energy Storage Devices, Method of Testing Based on Thermal Performance 91.140.01
ANSI/ASHRAE/IESNA 100-2006 现有建筑物的能源保护 Energy Conservation in Existing Buildings 91.140.01
ANSI/ASME B31.9-2008 建设服务管道 Building Services Piping 91.140.01
ANSI/ASSE 1018-2002 分离器密封起动阀.轻便供水装置 Trap Seal Primer Valves - Potable Water Supplied 91.140.01
ANSI/ASSE 1044-2002 分离器密封起动阀.排水装置类型和电子设计类型 Trap Seal Primer Devices - Drainage Types and Electronic Design Types 91.140.01
ANSI/ASSE 5000Series-2006 防回流组件试验者、修理者和检测者的专业资格标准 Professional Qualifications Standard for Backflow Prevention Assembly Testers, Repairers and Surveyors 91.140.01
ANSI/ASTM E1464-1992 商业和科研院所建筑物或设施的能量监测协议制定指南 Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (04.11) 91.140.01
ANSI/NFPA 900-2006 建筑物能源法规 Building Energy Code 91.140.01
ANSI/SMACNA 005-2003 圆形工业管道建造标准 Round Industrial Duct Construction Standards 91.140.01
ANSI/IEEE 1410-2004 电力架空配电线的避雷性能提高的指南 Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines 91.120.40
ANSI/IEEE 998-1996 变电所直接雷击防护指南 Guide for Direct Lightning Stroke Shielding of Substations 91.120.40
ANSI/UL 96-2005 避雷元件 Lightning Protection Components 91.120.40
ANSI/IICRC S500-2006 专业水污染和净化用IICRC S500标准和参考指南 IICRC S500 Standard and Reference Guide for Professional Water Damage Restoration 91.120.30
ANSI/SMACNA 001-2000 抗地震手册.机械系统指南 Seismic Restraint Manual: Guidelines for Mechanical Systems 91.120.25;93.020
ANSI/AISC 341-2005 结构钢建筑物的有关地震条款 Seismic Provisions for Structural Steel Buildings 91.120.25;91.100.30
ANSI S2.31-1979 机械灵活性的实验测定方法:第1部分:基本定义和传感器 Methods for the experimental determination of mechanical mobility - Part 1: Basic definitions and transducers 91.120.25
ANSI/AISI S110-2008 冷成型钢结构系统的地震设计用标准.专用螺栓连接的旋转轴结构 Standard for Seismic Design of Cold-Formed Steel Structural Systems - Special Bolted Moment Frames 91.120.25
ANSI/ASME B31E-2008 地上管道系统的地震设计与改造标准 Standard for the Seismic Design and Retrofit of Above Ground Piping Systems 91.120.25
ANSI/ASTM E2026-2007 建筑物地震损伤性估计指南 Guide for Estimation of Building Damageability in Earthquakes 91.120.25
ANSI/ASTM F2154-2001 吸音板、玻璃纤维和表面平整的多孔玻璃纤维布规范 Specification for Sound Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced 91.120.20
ANSI/ASTM E970-2006 暴露于辐射热能源中的绝缘阁楼地板的临界辐射通量的试验方法 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source 91.120.10
ANSI/EIMA 99-A-2001 终饰系统和外绝缘 Exterior Insulation and Finish Systems (EIFS) 91.100.99
ANSI A118.10-2008 薄瓷砖和规格石料铺设用承载的粘结防水膜 Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations 91.100.60
ANSI/ASTM D727-1996 真空法测定屋顶油毡和铺地毡煤油值的试验方法 Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method 91.100.50;97.150
ANSI/ASTM D3461-1997 地沥青和硬沥青软化点测试方法(Mettler杯球法) Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) 91.100.50;93.080.20
ANSI/ASTM D71-1994 固体沥青和地沥青相对密度试验方法(变位法) Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method) 91.100.50;93.080.20
ANSI A10.27-1998 热混沥青设备的安全要求 Safety Requirements for Hot Mix Asphalt Facilities 91.100.50
ANSI/ASTM D2416-1984 焦油和硬沥青焦化值测试方法 Test Method for Coking Value of Tar and Pitch (Modified Conradson) 91.100.50
ANSI/ASTM D2764-1999 焦油和沥青中二甲基甲酰胺非溶物质含量的试验方法 Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch 91.100.50
ANSI/ASTM D2962-1997 煤焦油沥青用体积-温度修正值计算的试验方法 Test Method for Calculating Volume-Temperature Correction for Coal-Tar Pitches 91.100.50
ANSI/ASTM D4068-2001 隐含水膜的氯化聚乙烯薄板规范 Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane (08.04) 91.100.50
ANSI/ASTM D4296-1983 沥青抽样惯例 Practice for Sampling Pitch 91.100.50
ANSI/ASTM D4312-2005 测定焦油中不可溶甲苯钛含量的试验方法.沥青快速法 Test Method for Toluene-insoluble Ti Content of Tar and Pitch Short Method 91.100.50
ANSI/ASTM D4616-2005 沥青中用反射光的显微分析和测定中间相的试验方法 Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch 91.100.50
ANSI/ASTM D4746-1998 用加压过滤法测定焦油和硬沥青中喹啉不溶物含量的试验方法 Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration 91.100.50
ANSI/ASTM E1494a-1992 含石棉易碎建筑材料密封剂喷涂或镘刀涂抹规程 Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials (04.11) 91.100.40
ANSI/AISC 341s1-2005 对结构钢建筑物地震条款的补充件1 Supplement No. 1 to the Seismic Provisions for Structural Steel Buildings 91.100.30;91.120.25
ANSI/UL 618-2003 混凝土圬工砌筑单元的安全规范 Standard for Safety for Concrete Masonry Units 91.100.30
ANSI A108.01-2005 一般要求:其它贸易的地表和制备 General Requirements: Subsurfaces and Preparations by Other Trades 91.100.25
ANSI A108.02-2008 一般要求:材料、环境和工作质量 General Requirements: Materials, Environmental, and Workmanship 91.100.25
ANSI A108.13-2005 薄集瓷砖和规格石料装置的承载、粘合、防水薄膜材料的安装 Installation of Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations 91.100.25
ANSI A108.14-2005 纸贴面玻璃锦砖的安装 Installation of Paper-Faced Glass Mosaic Tile 91.100.25
ANSI A108.15-2005 交变法:纸贴面玻璃锦砖的安装 Alternate Method: Installation of Paper-Faced Glass Mosaic Tile 91.100.25
ANSI A108.16-2005 纸贴面、背面衬纸、边缘衬纸或明亮薄膜表面的安装.安装玻璃锦砖 Installation of Paper-Faced, Back-Mounted, Edge-Mounted, or Clear Film Face-Mounted Glass Mosaic Tile 91.100.25
ANSI A108.17-2005 薄集瓷砖和规格石料裂纹绝缘薄膜的安装 Installation of Crack Isolation Membranes for Thin-set Tile and Dimension Stone 91.100.25
ANSI A108.1A-2005 用波特兰水泥灰浆用湿固定法安装陶瓷砖的规范 Specifications for Installation of Ceramic Tile in the Wet-Set Method, with Portland Cement Mortar 91.100.25
ANSI A108.1b-1999 用干的或渍浆的波特兰水泥灰浆在弯曲的波特兰水泥灰浆层上安装瓷砖的规范 Specifications for Installation of Ceramic Tile on a Cured Portland Cement Mortar Setting Bed with Dry-Set or Latex Portland Cement Mortar (included in ANSI A108.1-1992) 91.100.25
ANSI A108.1C-1999 签约人的选择规范：用湿处理方法使用普通水泥砂浆铺设瓷砖或用干处理方法使用普通水泥砂浆层或乳胶普通水泥砂浆铺设瓷砖(包括ANSI A108.1-1992) Specifications for Contractors Option: Installation of Ceramic Tile in the Wet-Set Method with Portland Cement Mortar or Installation of Ceramic Tile on a Cured Portland Cement Mortar Bed with Dry-Set or Latex Portland Cement Mortar (included in ANSI A108.1-1992) 91.100.25
ANSI A108.4-1999 用有机粘结剂或水可洗环氧树脂陶瓷砖粘结剂铺设瓷砖的规范(包括ANSI A108.1-1992) Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) 91.100.25
ANSI A108.5-1999 用干凝固普通水泥砂浆或渍浆的普通水泥砂浆铺设瓷砖的规范(包括ANSI A108.1-1992) Specifications for Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex Portland Cement Mortar (included in ANSI A108.1-1992) 91.100.25
ANSI A108.6-1999 用耐化学药品、可水清洗的瓷砖粘结和环氧薄泥浆铺设瓷砖的规范(包括ANSI A108.1-1992) Specifications for Installation of Ceramic Tile with Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy (included in ANSI A108.1-1992) 91.100.25
ANSI A108.8-1999 使用耐化学药品呋喃砂浆和薄泥浆铺设瓷砖的规范(包括ANSI A108.1-1992) Specifications for Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout (included in ANSI A108.1-1992) 91.100.25
ANSI A108.9-1999 使用改良环氧乳状砂浆/薄泥浆铺设瓷砖的规范(包括ANSI A108.1-1992) Specifications for Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout (included in ANSI A108.1-1992) 91.100.25
ANSI A118.12-2008 薄集瓷砖和规格石料裂纹绝缘薄膜的安装规范 Specifications for Crack Isolation Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations 91.100.25
ANSI A118.6-1999 陶瓷砖薄泥浆规范(包括ANSI A108.1-1992) Specifications for Ceramic Tile Grouts (included in ANSI A108.1-1992) 91.100.25
ANSI/ASME A112.19.16-2006 水磨石混合物要求 Terrazzo Fixture Requirements 91.100.25
ANSI/ASTM F1632-2003 高尔夫球场铺设绿呢和运动场草皮根层的粒度分析和沙形分级的试验方法 Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes 91.100.15;97.220.10
ANSI A10.20-2005 瓷砖、水磨石和大理石作业的安全要求 Safety Requirements for Ceramic Tile, Terrazo, and Marble Work 91.100.15
ANSI A118.3-1999 耐化学药品的水可清洗的磁砖安装和灌浆环氧树脂和水可清洗的磁砖固定粘结剂规范(包括ANSI A108.1-1992) Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) 91.100.15
ANSI/ASTM D5000-2005 利用测流传感器对粘土元素进行活性评估的实施规程 Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor 91.100.15
ANSI A108.12-1999 用外部胶合板( EGP)渍浆的普通水泥砂浆铺设瓷砖 Installation of Ceramic Tile with EGP (Exterior-Glue Plywood) Latex Portland Cement Mortar 91.100.10;91.100.25
ANSI A118.7-1999 陶瓷砖铺设用聚合物改良水泥薄泥浆规范 Specifications for Polymer Modified Cement Grouts for Ceramic Tile Installation 91.100.10;91.100.25
ANSI A108.10-1999 灰浆固定规范(包括ANSI A108.1-1992) Specifications for Installation of Grout in Tilework (included in ANSI A108.1-1992) 91.100.10
ANSI A118.11-1999 外部胶合板( EGP)乳胶普通水泥砂浆规范 Specifications for EGP (Exterior Glue Plywood) Latex-Portland Cement Mortar 91.100.10
ANSI A118.1-1999 干凝固普通水泥砂浆规范(包括ANSI A108.1-1992) Specifications for Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992) 91.100.10
ANSI A118.4-1999 浸浆普通水泥砂浆规范(包括ANSI A108.1-1992) Specifications for Latex Portland Cement Mortar (included in ANSI A108.1-1992) 91.100.10
ANSI A118.5-1999 瓷砖铺设用耐化学药品呋喃树脂砂浆和薄泥浆规范(包括ANSI A108.1-1992) Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992) 91.100.10
ANSI A118.8-1999 改良环氧树脂乳状砂浆薄泥浆规范(包括ANSI A108.1-1992) Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992) 91.100.10
ANSI/API 10B-2-2005 固井水泥试验的推荐实施规程 Recommended Practice for Testing Well Cements 91.100.10
ANSI/API 10B-3-2004 深水固井水泥成分检测的推荐实施规程 Recommended Practice on Testing of Deepwater Well Cement Formulations 91.100.10
ANSI/API RP10B-4-2004 大气压力下泡沫水泥浆的制备和试验的推荐规程 Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure 91.100.10
ANSI/API RP10B-5-2007 大气压力下固井水泥加工制剂的收缩和膨胀测定用推荐实施规程 Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure 91.100.10
ANSI/IEEE 277-2007 水泥厂配电用推荐实施规程 Recommended Practice for Cement Plant Power Distribution 91.100.10
ANSI/NFPA 255-2006 建筑材料表面燃烧特性的标准试验方法 Standard Method of Test of Surface Burning Characteristics of Building Materials 91.100.01;13.220.50
ANSI/ASTM E329-2007 工程检验和/或测试的参与机构的规范 Specification for Agencies Engaged in Construction Inspection and/or Testing 91.100.01
ANSI/NAAMM HMMA867-2006 商用叠层空芯金属门和门框的导则规范 Guide Specifications for Commercial Laminated Core Hollow Metal Doors and Frames 91.100.01
ANSI/ASTM F1916-1998 拘役用带涂层链节栅栏结构和圆柱的链节栅栏系统选用规范 Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications 91.090;91.040.10
ANSI/AF&PA NDS-2005 木结构用国家设计规范 National Design Specification for Wood Construction 91.080.20
ANSI/AF&PA PWF-2007 永久木材地基设计规范 Permanent Wood Foundation Design Specification 91.080.20
ANSI/AF&PA SDPWS-2005 NDS补充件:关于风和地震的特殊设计装置 NDS Supplement: Special Design Provisions for Wind and Seismic 91.080.20
ANSI/AFPA NDS-1997 木质建筑的国家设计规范 National Design Specification for Wood Construction 91.080.20
ANSI/SJI JG-1.1-2005 搁栅规范 Specification for Joist Girders 91.080.20
ANSI/TPI 1-2007 连接木框架结构的金属板的国家设计标准 National Design Standard for Metal Plate Connected Wood 91.080.20
ANSI/TPI/WTCA 4-2002 使用金属板材连接木桁架结构的责任推荐指南 Recommended Guidelines on Responsibilities for Construction Using Metal Plate Connected Wood Trusses 91.080.20
ANSI/AISC 358-2005 应用于地震的特种和中等钢力矩机架预先具备条件的连接 Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications 91.080.10;91.120.25
ANSI A10.13-2001 钢结构安装的安全要求 Safety Requirements for Steel Erection 91.080.10
ANSI C135.33-1988 镀锌铁制横担榫槽 Crossarm Gains, Galvanized Ferrous 91.080.10
ANSI/AISC 360-2005 结构钢建筑物的规范 Specification for Structural Steel Buildings 91.080.10
ANSI/AISI COFS/L99-1-2001 冷轧成型钢框架.顶端设计 Cold-Formed Steel Framing - Header Design 91.080.10
ANSI/AISI S100-2007 冷成形钢结构件的设计用2001北美规范 2001 North American Specification for the Design of Cold-Formed Steel Structural Members 91.080.10
ANSI/AISI S200-2007 冷轧成型钢框架的北美标准.总则 North American Standard for Cold-Formed Steel Framing - General Provisions 91.080.10
ANSI/AISI S211-2007 冷成型钢结构用北美标准.墙壁立柱设计 North American Standard for Cold-Formed Steel Framing - Wall Stud Design 91.080.10
ANSI/AISI S212-2007 冷轧成型钢框架的北美标准.顶盖设计 North American Standard for Cold-Formed Steel Framing - Header Design 91.080.10
ANSI/AISI S213-2007 冷轧成型钢框架.侧面设计 Cold-Formed Steel Framing - Lateral Design 91.080.10
ANSI/AISI/COS TS-5-2002 机械固定冷成型钢连接的试验方法 Test Method for Mechanically Fastened Cold-Formed Steel Connections 91.080.10
ANSI/AISI/COS TS-6-2004 板式和锚式结构试验标准程序 Standard Procedures for Panel and Anchor Structural Tests 91.080.10
ANSI/AISI/COS TS-7-2002 冷成型钢隔板的悬臂试验方法 Cantilever Test Method for Cold-Formed Steel Diaphragms 91.080.10
ANSI/NAAMM AMP521-2001 带圆形台面的管道围栏系统手册 Pipe Railing Systems Manual Including Round Table 91.080.10
ANSI/SJI K-1.1-2004 空腹钢搁栅规范.K系列 Specification for Open Web Steel Joists, K-Series 91.080.10
ANSI/SJI LH/DLH-1.1-2005 LH系列长跨度钢搁栅和DLH系列深长跨度钢搁栅规范 Specification for Longspan Steel Joists, LH-Series and Deep Longspan Steel Joists, DLH-Series 91.080.10
ANSI/TIA-1019-2004 天线塔和天线支撑结构的安装用钢起重把杆的结构标准 Structural Standards for Steel Gin Poles Used for Installation of Antenna Towers and Antenna Supporting Structures 91.080.10
ANSI/ASSE A10.19-2008 安全规定，桩的安装和提取业务 Safety Requirements for Pile Installation and Extraction Operations 91.060.99
ANSI/BHMA A156.16-2002 辅助硬件 Auxiliary Hardware 91.060.50;91.190
ANSI/UL 305-2007 应急设备的安全标准 Standard for Safety for Panic Hardware 91.060.50;91.190
ANSI/NAAMM HMMA865-2003 摇摆声控空心金属门及门框指导性规范 Guide Specifications for Swinging Sound Control Hollow Metal Doors and Frames 91.060.50;91.120.20
ANSI/UL 10C-2001 门附件的正压燃烧试验的安全标准 Standard for Safety for Positive Pressure Fire Tests of Door Assemblies 91.060.50;13.220.50
ANSI/DASMA 107-1997 使用泡沫塑料隔热的车库门室内燃烧试验标准 Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation 91.060.50;13.220.40
ANSI/NAAMM HMMA801-2005 空心金属门和门框的术语汇编 Glossary of Terms for Hollow Metal Doors and Frames 91.060.50;01.040.91
ANSI A224.1-1990 钢门和门框涂底漆的钢材表面的试验程序和验收标准 Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames 91.060.50
ANSI A250.10-1998 钢门和门框的钢表面底漆的试验程序和验收标准 Steel Surfaces for Steel Doors and Frames, Test Procedure and Acceptance Criteria for Prime Painted 91.060.50
ANSI A250.13-2003 转动式门组件用的抗恶劣风暴气候的元部件的试验和额定值 Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies 91.060.50
ANSI A250.3-2007 钢门和门框的工厂用精细涂漆钢表面的试验程序和验收标准 Test Procedure and Acceptance Criteria for Factory-Applied Finish Painted Steel Surfaces for Steel Doors and Frames 91.060.50
ANSI A250.4-2001 钢门和五金加强件的物理耐久性的试验程序和验收标准 Test Procedure and Acceptance Criteria for - Physical Endurance for Steel Doors and Hardware Reinforcings Copyright is now SDI 91.060.50
ANSI A250.6-2003 标准钢制门五金件(增强型) Hardware on Standard Steel Doors (Reinforcement-Application) 91.060.50
ANSI A250.7-1997 钢门和钢门框的术语 Nomenclature for Steel Doors and Steel Door Frames 91.060.50
ANSI A250.8-2003 标准钢门和门框的推荐性规范 Recommended Specifications for Standard Steel Doors and Frames 91.060.50
ANSI/AAMA 101-1993 铝和PVC制优质窗和玻璃门 Aluminum and Poly(Vinyl Chloride) (PVC) Prime Windows and Glass Doors 91.060.50
ANSI/ABYC H-3-2008 外窗，挡风玻璃，舱口，车门，港口灯，和玻璃材料 Exterior Windows, Windshields, Hatches, Doors, Port Lights, and Glazing Materials 91.060.50
ANSI/ASTM E1424-1991 在试验样件规定压力和温差下测定通过外窗、幕墙和门空气泄漏率的试验方法 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen (04.11) 91.060.50
ANSI/ASTM E783-1993 穿过安装的外窗和门的空气泄漏现场测量的试验方法 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors (04.11) 91.060.50
ANSI/ASTM F1196-2001 防水拉门组件标准规范 Specification for Sliding Watertight Door Assemblies 91.060.50
ANSI/ASTM F1450-1997 拘留所空心金属活动门组件试验方法 Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities 91.060.50
ANSI/BHMA A156.10-2005 电动人行门 Power Operated Pedestrian Doors 91.060.50
ANSI/BHMA A156.14-2007 推拉门和折叠门小五金 Sliding and Folding Door Hardware 91.060.50
ANSI/BHMA A156.15-2006 释放装置.电磁和机电闭门手持器 Release Devices - Closer Holder, Electromagnetic and Electromechanical 91.060.50
ANSI/BHMA A156.19-2007 动力辅助和低能耗动力驱动门 Power Assist and Low-Energy Power-Operated Doors 91.060.50
ANSI/BHMA A156.21-2006 门槛 Thresholds 91.060.50
ANSI/BHMA A156.22-2005 门垫片和封边系统 Door Gasketing and Edge Seal Systems 91.060.50
ANSI/BHMA A156.27-2003 动力和人工控制的人通行的旋转门 Power and Manual Operated Revolving Pedestrian Doors 91.060.50
ANSI/BHMA A156.3-2001 逃生设备 Exit Devices 91.060.50
ANSI/DASMA 102-2004 部分升降门规范 Specifications for Sectional Overhead Type Doors 91.060.50
ANSI/DASMA 105-1992 车库门的热传递和透气率测试方法 Test Method for Thermal Transmittance and Air Infiltration of Garage Doors 91.060.50
ANSI/DASMA 108-2005 试验组合车库门和滚动门的标准方法:用均匀静态空气压差下测定结构性能 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference 91.060.50
ANSI/DASMA 115-2005 测试车库门用标准方法:在投掷物冲击和循环风压力下结构性能的测定 Standard Method for Testing Garage Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure 91.060.50
ANSI/DASMA 116-2007 家用车库门构用部件连接装置？ Section Interfaces on Residential Garage Door Systems 91.060.50
ANSI/DASMA 203-2004 不耐火滑动门标准 Standard for Non-Fire Rated Rolling Doors 91.060.50
ANSI/DASMA 204-2004 耐火滑动门组件标准 Standard for Fire Rated Rolling Door Assemblies 91.060.50
ANSI/IWCA I14.1-2001 窗户清洁安全 Window Cleaning Safety 91.060.50
ANSI/NAAMM HMMA841-2007 商业空心金属门和门框的公差和间隙 Tolerances and Clearances for Commercial Hollow Metal Doors and Frames 91.060.50
ANSI/NAAMM HMMA861-2006 商用空心金属门和框的指导规范 Guide Specifications for Commercial Hollow Metal Doors and Frames 91.060.50
ANSI/NAAMM HMMA862-2003 商用安全中空金属门和门框的指南性规范 Guide Specifications for Commercial Security Hollow Metal Doors and Frames 91.060.50
ANSI/NAAMM HMMA863-2004 阻滞安全型空心金属门和门框的指南规范 Guide Specifications for Detention Security Hollow Metal Doors and Frames 91.060.50
ANSI/NAAMM HMMA866-2001 不锈钢空心金属门和框架指导性规范 Guide Specifications for Stainless Steel Hollow Metal Doors and Frames 91.060.50
ANSI/SDI 100-1991 钢门和门框 Steel Doors and Frames 91.060.50
ANSI/UL 1784-2004 门组件空气渗漏试验的安全标准 Standard for Safety for Air Leakage Tests for Door Assemblies 91.060.50
ANSI/WCMA A100.1-2007 绳状窗用遮盖产品的安全 Safety of Corded Window Covering Products 91.060.50
ANSI/WDMA I.S.1A-2004 建筑木制结构齐边拉门的工业规范 Industry Specification for Architectural Wood Flush Doors 91.060.50
ANSI/WDMA I.S.6A-2001 建筑木制门挺和有轨门的工业标准 Industry Standard for Architectural Wood Stile and Rail Doors 91.060.50
ANSI Z21.12-1990 烟厨通风罩 Draft hoods 91.060.40
ANSI Z21.12a-1993 通风罩 Draft Hoods 91.060.40
ANSI Z21.12b-1994 通风罩 Draft Hoods 91.060.40
ANSI/UL 103-2006 工厂制住宅型烟囱和建筑物供暖设备的安全标准 Standard for Safety for Factory-Built Chimneys for Residential Type and Building Heating Appliances 91.060.40
ANSI/UL 1777-2007 烟囱内衬砌料安全标准 Standard for Safety for Chimney Liners 91.060.40
ANSI/UL 959-2006 中等热设备厂已建成的烟囱 Medium Heat Appliance Factory-Built Chimneys 91.060.40
ANSI A1264.2-2006 步行区/工作场所表面防止滑倒的规定 Provision of Slip Resistance on Walking/Working Surfaces 91.060.30
ANSI A14.9-2004 吊装暗式爬高系统的安全要求 Safety Requirements for Ceiling Mounted Disappearing Climbing Systems 91.060.30
ANSI/ASHRAE 138P-2005 评定顶棚嵌板感应供暖和冷却的试验方法 Method of Testing for Rating Ceiling Panels for Sensible Heating and Cooling 91.060.30
ANSI/ASTM E1155-1996 用F-值系统测定地板平直度和水平度的试验方法 Test Method for Determining Floor Flatness and Levelness Using the F-Number System (04.11) 91.060.30
ANSI/ASTM E1155M-1996 用F-数字系统(米制)测定地板平直度和水平度的试验方法 Test Method for Determining Floor Flatness and Levelness Using the F-Number System (Metric) (04.11) 91.060.30
ANSI/ASTM E894-1988 建筑物护栏和永久金属护栏系统用锚固装置的试验方法 Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11) 91.060.30
ANSI/SDI C1.0-2006 复合钢地板的规范 Specification for Composite Steel Floor Deck 91.060.30
ANSI/SDI NC1.0-2006 非复合地板的规范 Specification for Non-Composite Floor Deck 91.060.30
ANSI/SDI RD1.0-2006 屋顶钢板的规范 Specification for Steel Roof Deck 91.060.30
ANSI/SJI CJ-1.0-2006 CJ系列合成钢横梁标准实践用标准规范和法规 Standard Specifications and Code of Standard Practice for Composite Steel Joists, CJ-Series 91.060.30
ANSI/SJI CJCOSP-1.0-2006 CJ系列合成钢横梁标准实践用标准规范和法规 Standard Specifications and Code of Standard Practice for Composite Steel Joists, CJ-Series 91.060.30
ANSI/UL 2390-2004 带密封板的防风沥青墙面板试验方法的安全标准 Standard for Safety for Test Method for Wind Resistant Asphalt Shingles with SealedTabs 91.060.20;91.100.60
ANSI/UL 793-2004 用于烟和热的自动操作屋顶通风孔的安全标准 Standard for Safety for Automatically Operated Roof Vents for Smoke and Heat 91.060.20;13.220.20
ANSI A10.24-2006 屋面材料.低斜坡屋面的安全要求 Roofing - Safety Requirements for Low-Sloped Roofs 91.060.20
ANSI/AISI S210-2007 冷成型钢结构用北美标准.地板和屋顶系统设计 North American Standard for Cold-Formed Steel Framing - Floor and Roof System Design 91.060.20
ANSI/AISI/COS TS-8-2004 固定接缝屋顶系统承重檩条的基本试验方法 Base Test Method for Purlins Supporting a Standing Seam Roof System 91.060.20
ANSI/ASAE EP484.2-1998 包金属的柱式框架矩形建筑物的结构和横隔梁 Diaphragm, Design of Metal-Clad Post-Frame Rectangular Buildings 91.060.20
ANSI/ASAE EP559-1997 机械层压的板条墙筋的设计要求和弯曲特性 Design Requirements and Bending Properties for Mechanically Laminated Posts 91.060.20
ANSI/ASME A112.6.9-2005 虹吸式屋顶排水口 Siphonic Roof Drains 91.060.20
ANSI/ASTM F2021-2006 塑料虹吸式屋面排水系统设计和安装规范 Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems 91.060.20
ANSI/SPRI ES-1-2003 低斜屋顶边缘系统抗风设计标准 Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems 91.060.20
ANSI/SPRI RD-1-2003 改型排水管的性能标准 Performance Standard for Retrofit Drains 91.060.20
ANSI/SPRI RP-4-2002 铺石渣单层屋面系统的风荷载设计标准 Wind Design Standard for Ballasted Single-Ply Roofing Systems 91.060.20
ANSI/SPRI WD-1-2007 屋顶层组件的风荷载设计的标准实施规程 Wind Design Standard Practice for Roofing Assemblies 91.060.20
ANSI/UL 1897-2004 屋顶层覆盖系统抬起试验的安全标准 Standard for Safety for Uplift Tests For Roof Covering Systems 91.060.20
ANSI/ASTM D5319-2001 玻璃纤维增强聚酯墙板和天花板规范 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels 91.060.10;91.060.30
ANSI/NFPA 285-2006 使用中等尺寸多层试验仪评定包含可燃部件的外部非承重墙组件可燃性特征的标准试验方法 Standard Method of Test for the Evaluation of Flammability Characteristics of Exterior Nonload Bearing Wall Assemblies Containing Combustible Components Using the Intermediate Scale Multi-Story Test Apparatus 91.060.10;13.220.50
ANSI A108.11-1999 胶粘背衬组件内部铺设规范(包括ANSI A108.1-1992) Specifications for Interior Installations of Cementitious Backer Units (included in ANSI A108.1-1992) 91.060.10
ANSI A118.9-1999 粘结衬垫组件规范(包括ANSI A108.1-1992) Specifications for Cementitious Backer Units (included in ANSI A108.1-1992) 91.060.10
ANSI/ASTM D5206-2006 硬质聚氯乙烯挡板耐风载荷试验方法 Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding 91.060.10
ANSI/ASTM D7254-2006 聚丙烯(PP)墙面板的规范 Specification for Polypropylene (pp) Siding 91.060.10
ANSI/ASTM E2127-2001 建筑物结构隔墙系统抗拉伸与横向荷载组合的静荷载试验方法 Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction 91.060.10
ANSI/ASTM E2128-2001 建筑墙体漏水性评价指南 Guide for Evaluating Water Leakage of Building Walls 91.060.10
ANSI/ASME A112.6.4-2003 房顶、地面和阳台排水管 Roof, Deck, and Balcony Drains 91.060.01
ANSI/ASTM E699-2003 检验机构评价的标准规程 Practice for Criteria for Evaluation of Agencies Involved in Testing 91.060.01
ANSI/ASTM E754-1980 埋入砌筑砂浆缝中的拉杆和锚的拉拔阻力的试验方法 Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (04.11) 91.060.01
ANSI E1.21-2006 娱乐业技术.在户外娱乐事件中用于舞台的临时地面支撑架空结构和支撑设备 Entertainment Technology - Temporary Ground-Supported Overhead Structures Used to Cover the Stage Areas and Support Equipment in the Production of Outdoor Entertainment Events 91.040.99;97.200.10
ANSI/NFPA 102-2006 支架、折叠和伸缩椅、帐篷和隔板结构的标准 Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures 91.040.99
ANSI/ASHRAE/IESNA 90.1ap-2001 除层数低而无电梯的住宅楼房外的建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.040.30;91.140.99;91.010.30
ANSI/AISI S230/S 1-2008 冷成型钢框架用标准附录1.一户和两户住宅的惯用方法 Supplement 1 to the Standard for Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings 91.040.30;91.080.10
ANSI/AISI S230-2007 冷轧成型钢架的标准.一户和两户住宅的惯用方法 Standard for Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings 91.040.30;91.080.10
ANSI Z765-2003 单元式居住房屋.方形尺码.计算方法 Single-Family Residential Buildings - Square Footage - Method for Calculating 91.040.30
ANSI/ASTM E1679-1995 对建筑物或建筑物相关设施制定适用性要求的实施规程(04.11) Practice for Setting Requirements for Serviceability of a Building or Building-Related Facility (04.11) 91.040.20
ANSI/ASTM F1964-2006 压力油炸锅和锅状油炸锅性能试验方法 Test Method for the Performance of Pressure and Kettle Fryers 91.040.20
ANSI/ASTM F1965-2006 台式炉性能试验方法 Test Method for the Performance of Deck Ovens 91.040.20
ANSI/IEEE 739-1995 工业设施中能量守恒和成本效果计划 Energy Conservation and Cost-Effective Planning in Industrial Facilities 91.040.20
ANSI/TIA/EIA 862-2002 商用建筑物用建筑物自动化系统电缆敷设标准 Building Automation Systems Cabling Standard for Commercial Buildings 91.040.20
ANSI/TIA-862-2002 商用建筑物的建筑自动化系统的电缆敷设标准 Building Automation Systems Cabling Standard for Commercial Buildings 91.040.20
ANSI/NFPA 909-2005 包括博物馆、图书馆、教堂和历史文物在内的文化资源的保护标准 Standard for the Protection of Cultural Resources, Including Museums, Libraries, Places of Worship, and Historic Properties 91.040.10;13.220.20
ANSI/ASTM F1592-2001 拘留用空心金属可视系统试验方法 Test Method for Detention Hollow Metal Vision Systems 91.040.10
ANSI/NFPA 1620-2003 事故预警计划的推荐实施规范 Recommended Practice for Pre-Incident Planning 91.040.01;13.220.20
ANSI/NFPA 204M-1991 烟雾和热的排放 Smoke and Heat Venting 91.040.01;13.220.20
ANSI/ASTM E1334-1995 建筑物或设施的耐用额定值的制定实施规程(04.11) Practice for Preparing a Serviceability Rating of a Building or Facility (04.11) 91.040.01
ANSI/ASTM E1699-1995 建筑物和建筑物系统进行价值分析的实施规程 Practice for Performing Value Analysis (VA) of Buildings and Building Systems (04.11) 91.040.01
ANSI/ICC 2.0-1998 人造住宅建设和安全标准 Manufactured Housing Construction and Safety Standards 91.040.01
ANSI/ICC A117.1-2003 可接近的可用建筑物和设施 Accessible and Useable Buildings and Facilities 91.040.01
ANSI/MTS 1.0WSIP Guide-2007 全系统一体化进程 Whole Systems Integration Process 91.040.01
ANSI/NFPA 241-2004 建筑物改建及拆除的安全防护 Safeguarding Construction, Alteration, and Demolition Operations 91.040.01
ANSI/NFPA 5000-2006 房屋建筑和安全规范T Building Construction and Safety CodeT 91.040.01
ANSI/ASHRAE 90.2-2007 新型低层住宅建筑物的能量有效性设计 Energy Efficient Design of New Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE 90.2k-2007 低层住宅建筑物的能量有效性设计 Energy Efficient Design of Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1-2007 除低层住宅建筑物(包括附加物B、C、D、E、F、G、I和M)外新型建筑物的能量有效性设计 Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings (Including Addenda B, C, D, E, F, G, I and M) 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1a-2007 除低层住宅建筑外的建筑物能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1aa-2007 除低层住宅建筑外建筑物用能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ab-2007 除低层住宅建筑外建筑物用能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ac-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ae-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ag-2007 除低层住宅建筑外建筑物用能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ah-2007 除低层住宅建筑外的建筑物用能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ai-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1al-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1an-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ao-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ap-2007 除低层住宅建筑外建筑物用能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1aq-2007 除低层住宅建筑外的建筑物能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1ar-2007 除低层住宅建筑外的建筑物能源标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1as-2007 低层住宅建筑物除外的建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1at-2007 低层住宅建筑除外的建筑能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1av-2007 除低层住宅建筑外的建筑物能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1b-2007 除低层住宅建筑外的建筑物能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.1y-2007 除低层住宅建筑外建筑物的能量标准 Energy Standard for Buildings Except Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.2c-2007 低层住宅建筑的能效设计 Energy Efficient Design of Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.2d-2007 低层住宅建筑的能效设计 Energy Efficient Design of Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI/ASHRAE/IESNA 90.2e-2007 低层住宅建筑的能效设计 Energy Efficient Design of Low-Rise Residential Buildings 91.010.30;91.040.30;91.140.99
ANSI FM4474-2004 用静态正和/或负差压评价屋顶组件耐模拟风吹起的试验标准 Test Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures 91.010.30
ANSI/ASTM E2619-2008 实践测量和计算的损失建设的特点，采取了楼面面积在建筑物 Practice for Measuring and Calculating Building Loss Features that Take Up Floor Area in Buildings 91.010.30
ANSI/ASTM E564-1995 建筑物构架墙抗剪强度的静态载荷的试验方法 Method of Static Load Test for Shear Resistance of Framed Walls for Buildings (04.11) 91.010.30
ANSI/ACCA 5QI-2007 HVAC质量安装检修规程 HVAC Quality Installation Specification 91.010.20
ANSI/ASTM E651-2002 建造建筑物的系统分析和符合性保证从业机构能力评价导则 Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building 91.010.10
ANSI/ASTM E631-1993 建筑术语 Terminology of Building Construction (04.11) 91.010.01;01.040.91
ANSI/ASTM D611a-2001 石油产品和碳氢化合物溶剂的苯胺溶点和混合苯胺溶点测试方法(05.01, 06.04, 10.03) Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents, Method of Test for (05.01, 06.04, 10.03) 87.060.30;71.080.01
ANSI/ASTM D2108-1997 卤化有机溶剂或其搀合物颜色的测定方法 Test Method for Color of Halogenated Organic Solvents and their Admixtures (Platinum-Cobalt Scale) 87.060.30
ANSI/ASTM D2251-1996 卤化有机溶剂或其搀合物进行金属腐蚀试验方法 Test Method for Metal Corrosion by Halogenated Organic Solvents and their Admixtures 87.060.30
ANSI/ASTM D2942-1996 卤化有机溶剂总酸容量测定方法 Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods) 87.060.30
ANSI/ASTM D2943-1996 1,1,1-三氯乙烷铝划痕试验方法 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane 87.060.30
ANSI/ASTM D3698-1996 溶剂蒸气脱脂操作惯例 Practice for Solvent Vapor Degreasing Operations 87.060.30
ANSI/ASTM D465-1990 石油蜡的胶粘温度和剥离温度测试方法 Test Method for Blocking and Picking Points of Petroleum Wax 87.060.20
ANSI Z356.5-1998 工艺美术材料.涂料和油墨 Art and Craft Materials - Paints and Inks 87.040;87.080;97.195
ANSI X3.152-1987 办公用机器和供应品.非碳化,单层加法器纸卷的规范 Office Machines and Supplies - Noncarbonized, Single-Ply Adding Machine Paper Rolls - Specifications 85.080;35.260.10
ANSI/ASTM D6548-2005 薄棉卫生纸抗机械穿透性的试验方法(球爆裂过程) Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) 85.080.20
ANSI INCITS151-1987 胶接纸和索引光泽纸板.通用纸张规格 Bond Papers and Index Bristols - Common Sheet Sizes 85.080.10
ANSI INCITS152-1987 非碳化单层加法机纸卷规范 Noncarbonized, Single-Ply, Adding Machine Paper Rolls, Specifications for 85.080.10
ANSI INCITS96-1983 单一代码连续办公用纸张规格 Forms, Paper Sizes for Single-Part Continuous Business 85.080.10
ANSI/ASTM D2177-1999 吸墨纸的墨水吸收性试验方法 Test Method for Ink Absorption of Blotting Paper 85.080.10
ANSI/ASTM D3460-2007 白色水印和无水印证券、油印机、复印机、复照和激光打印机用按尺寸切割办公用纸规范 Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-sized Office Papers 85.080.10
ANSI/ASTM D4825-1997 基本尺寸办公用纸卷曲度测量方法 Test Method for Measurement of Curl in Cut-Sized Office Paper 85.080.10
ANSI/ASTM D4917-1997 用水平面法测量非涂层书写印刷纸动态和静态摩擦系数的方法 Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method 85.080.10
ANSI/ASTM D4918-1997 用倾斜面法测试无涂层书写纸和印刷纸静磨擦系数的试验方法 Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method 85.080.10
ANSI/ASTM D4949-1997 书写纸直流电阻测定方法 Test Method for Determination of D.C. Resistivity of Writing Paper (Keithley Method) 85.080.10
ANSI/ASTM D4987-1994 在一段连续纸张上穿孔测定抗拉撕裂强度的试验方法 Test Method for Tensile Breaking Strength of Perforations in One Part Continuous Forms Paper 85.080.10
ANSI/ASTM D6819-2002 用烘干炉曝光装置测定打印纸和书写纸加速温度老化的方法 Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus 85.080.10
ANSI/ASTM D6833-2002 用污染室曝露装置测定打印纸和书写纸加速污染老化的方法 Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus 85.080.10
ANSI/ASTM D780-1995 纸的油墨渗透试验方法(蓖麻油试验) Test Method For Printing Ink Permeation Of Paper (Castor Oil Test) 85.080.10
ANSI X3.151-1987 办公用机器和供应品.胶接纸和索引细料纸板.通用页纸规格 Office Machinery and Supplies - Bond Papers and Index Bristols - Common Sheet Sizes 85.060;85.080;35.260.10
ANSI/SPRI IA-1-2005 测定各种衬底上方绝缘胶粘剂抗机械提升力的现场试验过程 Field Test Procedure for Determining the Mechanical Uplift Resistance of Insulation Adhesives over Various Substrates 83.180;91.060.20
ANSI/ASAE S430.1-1996 农用设备轮胎的负载和膨胀压力 Agricultural Equipment Tire Loading and Inflation Pressures 83.160.30
ANSI/SAE J2429-1998 卡车轮胎的自由滚动转向试验 Free-Rolling Cornering Test for Truck Tires 83.160.10
ANSI/SAE J57-1994 公路卡车轮胎的声级 Sound Level of Highway Truck Tires 83.160.10
ANSI/NFPA 231D-1994 橡胶轮胎的储存 Storage of Rubber Tires 83.160.01;13.220.20
ANSI/ASTM D4726-2002 组装式门窗用刚性聚氯乙烯挤压型材规范 White Rigid Poly (Vinyl Chloride) Exterior-Profile Extrusions Used for Assembled Windows and Doors, Specification for (08.04) 83.140.99;91.060.50
ANSI/ASTM D5203-1998 再生高密度聚乙烯材料模塑和挤塑聚乙烯塑料规范 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03) 83.140.99;83.080.20
ANSI/ASTM D706-1996 醋酸纤维素模压和挤压成形化合物规范 Specification for Cellulose Acetate Molding and Extrusion Compounds 83.140.99;83.080.20
ANSI/ASTM D707-1996 醋酸-丁酸纤维素模压和挤压成形化合物规范 Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds 83.140.99;83.080.20
ANSI/ASTM D1003-2000 透明塑料混浊度和透光度测试方法(08.01) Test Method for Haze and Luminous Transmittance of Transparent Plastics (08.01) 83.140.99
ANSI/ASTM D1201-1999 热固性聚酯模压化合物规范 Specification for Thermosetting Polyester Molding Compounds 83.140.99
ANSI/ASTM D1562-1996 塑料泡沫丙酸盐模铸挤压物规范 Specification for Cellulose Propionate Molding and Extrusion Compounds 83.140.99
ANSI/ASTM D1636-1999 烯丙基合成化合物规范 Specification for Allyl Molding Compounds 83.140.99
ANSI/ASTM D1710-1999 聚四氟乙烯基型材、杆材和厚壁管材(08.02) Polytetrafluoroethylene (PTFE) Basic Shapes, Rod and Heavy-Walled Tubing (08.02) 83.140.99
ANSI/ASTM D1896-1999 传递热固性化合物模塑样品惯例(08.02) Transfer Molding Specimens of Thermosetting Compounds, Practice for (08.02) 83.140.99
ANSI/ASTM D2581-2001 聚丁烯塑料模塑和挤塑材料规范(08.02,08.04) Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04) 83.140.99
ANSI/ASTM D2659-1995 吹制热塑性容器纵向破碎特性试验方法 Test Method for Column Crush Properties of Blown Thermoplastic Containers 83.140.99
ANSI/ASTM D3013-1999 环氧模制化合物规范(08.02) Specification for Epoxy Molding Compounds (08.02) 83.140.99
ANSI/ASTM D3015-1995 塑料配合料中颜料扩散的微观检查的推荐实施规程(08.02) Recommended Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (08.02) 83.140.99
ANSI/ASTM D3123-1994 低压热固性模塑料的螺线流动度的试验方法(08.02) Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds (08.02) 83.140.99
ANSI/ASTM D3307-2001 PFA碳氟模塑和挤塑材料规范 PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03) 83.140.99
ANSI/ASTM D3419-1993 热固性混合料制试样的往复螺杆式注塑方法(08.03) In-Line Screw-Injection Molding of Test Specimens from Thermosetting Compounds, Practice for (08.03) 83.140.99
ANSI/ASTM D4020-2001 超高分子量聚乙烯模压和挤压材料规范(08.02) Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02) 83.140.99
ANSI/ASTM D4745-2001 聚四氟乙烯模压和挤压料填充化合物新标准规范 New Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.03) 83.140.99
ANSI/ASTM D5336-2000 聚邻苯二酰胺(PPA)注模材料规范 Specification for Polyphthalamide (PPA) Injection Molding Materials 83.140.99
ANSI/ASTM D5436-1999 注塑聚甲基丙烯酸甲酯塑料棒、管和型材规范 Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes and Shapes 83.140.99
ANSI/ASTM D5510-1994 可氧化降解塑料的加热老化实施规程 Practice for Heat Aging of Oxidatively Degradable Plastics 83.140.99
ANSI/ASTM D6712-2001 超高分子量聚乙烯实心塑料型材规范 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes 83.140.99
ANSI/ASTM D704-1999 三氯氰胺甲醛模制化合物规范(08.01) Specifications for Melamine-Formaldehyde Molding Compounds (08.01) 83.140.99
ANSI/ASTM D705-1999 脲甲醛模制化合物规范(08.01) Specification for Urea-Formaldehyde Molding Compounds (08.01) 83.140.99
ANSI/ASTM D787-1997 乙基纤维模制和挤压化合物规范 Specification for Ethyl Cellulose Molding and Extrusion Compounds 83.140.99
ANSI/ASTM D788-1997 聚合(异丁烯酸甲酯)(PMMA)模制和挤压复合物规范 Specification for Poly (Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds (95-1, Item 18) 83.140.99
ANSI/ASTM F905-2004 聚乙烯鞍形熔融接头合格鉴定的实施规范 Practice for Qualification of Polyethylene Saddle Fusion Joints 83.140.99
ANSI/UL 746D-2003 聚合材料.成品零件 Polymeric Materials - Fabricated Parts 83.140.99
ANSI/ASTM F2165-2002 预绝缘软管规范 Specification for Flexible Pre-insulated Piping 83.140.40
ANSI/ASTM D6457-1999 聚四氟乙烯(PTFE)厚壁管和压缩和挤压注模棒规范 Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Made from Polytetrafluoroethylene (PTFE) 83.140.30
ANSI A161.2-1998 人造高压力加工的装饰性案台面板的性能标准 Decorative Laminate Countertops, Performance Standards for Fabricated High Pressure 83.140.20
ANSI/ASTM D669-2003 与叠层薄板材和中厚板材的层片相对应的损耗因数和渗透率的试验方法 Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials 83.140.20
ANSI/ASTM D709-2001 层压热固性材料规范 Specification for Laminated Thermosetting Materials 83.140.20
ANSI/UL 746E-2007 聚合材料的安全标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料 Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards 83.140.20
ANSI/ASTM D1239-1998 化学制剂测量塑料薄膜抗萃取性的方法(08.01) Test Method for Resistance of Plastic Films to Extraction by Chemicals (08.01) 83.140.10
ANSI/ASTM D1593-1999 非刚性氯乙烯塑料薄板规范(08.01) Specification for Nonrigid Vinyl Chloride Plastic Sheeting (08.01) 83.140.10
ANSI/ASTM D1746-1997 塑料薄板透明度测试方法(X-40-3)(08.02) Test Method for Transparency of Plastic Sheeting (X-40-3) (08.02) 83.140.10
ANSI/ASTM D1790-1999 冲击法测定塑料薄板的易破碎温度的试验方法(08.01) Test Method for Brittleness Temperature of Plastic Sheeting by Impact (08.01) 83.140.10
ANSI/ASTM D1830-1999 弧形电极法测定电绝缘挠性薄片材料耐热性的试验方法(10.01) Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01) 83.140.10
ANSI/ASTM D1894-2001 塑料薄膜和薄板静摩擦和动摩擦系数测试方法(08.02) Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (08.02) 83.140.10
ANSI/ASTM D2291-1998 玻璃树脂环状试样制备惯例 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites 83.140.10
ANSI/ASTM D2457-1997 塑料薄膜和薄板镜面光泽测试方法 Test Method for Specular Gloss of Plastic Film and Sheeting 83.140.10
ANSI/ASTM D2732-1997 塑料薄膜和薄板的自由线性热收缩的测试方法 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting 83.140.10
ANSI/ASTM D2838-1997 塑料薄膜和薄板收缩张力及定向释放应力试验方法 Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting 83.140.10
ANSI/ASTM D2923-2001 聚烯烃薄膜和薄板刚性的测试方法(08.02) Test Method for Rigidity of Polyolefin Film and Sheeting (08.02) 83.140.10
ANSI/ASTM D3293-1991 PTFE树脂模制薄板规范(08.03) Specification for PTFE Resin Molded Sheet (08.03) 83.140.10
ANSI/ASTM D3308-2001 PTFE树脂切削带规范(08.03) Specification for PTFE Resin Skived Tape (08.03) 83.140.10
ANSI/ASTM D3354-1996 用平行板法测定塑料薄膜阻挡承载力的方法(08.03) Test Method for Blocking Load of Plastic Film by the Parallel Plate Method 83.140.10
ANSI/ASTM D3368-1999 FEP碳氟化合物树脂薄板和薄膜(08.03) FEP Fluorocarbon Resin Sheet and Film (08.03) 83.140.10
ANSI/ASTM D3369-2001 TFE碳氟树脂铸膜规范 Specification for TFE-Fluorocarbon Resin Cast Film (08.03) 83.140.10
ANSI/ASTM D4204-2000 用于次魁毒素研究的塑料薄膜样品制备惯例 Practice for Preparing Plastic Film Specimens for a Round-Robin Study 83.140.10
ANSI/ASTM D4225-1997 苯乙烯-丁二烯薄板规范 Specification for Styrene-Butadiene Sheeting (08.03) 83.140.10
ANSI/ASTM D4272-1999 用装有测量仪器的坠落镖测量塑料薄膜耐冲击性的方法 Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03) 83.140.10
ANSI/ASTM D4321-1999 塑料薄膜包装件试验方法(08.02) Test Method for Package Yield of Plastic Film (08.02) 83.140.10

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点