畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/ASTM D56-2005 用泰格闭杯试验器测定闪点的试验方法 Test Method for Flash Point by Tag Closed Cup Tester
ANSI/ASTM F1130-2000 船涂覆系统检验的标准实施规程 Practice for Inspecting the Coating System of a Ship
ANSI B65.3-2001 安全标准.切纸机、平整机和整体加工设备 Safety standard - Guillotine paper cutters, mill trimmers and integral handling equipment
ANSI B65.4-2002 安全标准.包括旋转的三刀切剪机和单-多刀切剪机 Safety standard - Three-knife trimmers, including rotary, and single- and multiple-knife trimmers
ANSI/ASTM F430-1996 真空吸尘器过滤袋用纸试验方法 Test Methods for Paper Used for Vacuum Cleaner Filter Bags
ANSI/ASTM D1030-1999 纸张和纸板的纤维分析试验方法 Test Method for Fiber Analysis of Paper and Paperboard
ANSI/ASTM D1223-1993 75℃时纸和纸板有金属光泽面的试验方法 Test Method for Specular Gloss of Paper and Paperboard at 75 Degrees
ANSI/ASTM D1224-1992 纸中锌和镉含量测试方法 Test Method for Zinc and Cadmium in Paper
ANSI/ASTM D1749-1993 实验室评估纸和纸产品试验方法的惯例 Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ANSI/ASTM D2019-1997 纸和纸板中夹杂物的试验方法 Test Method for Dirt in Paper and Paperboard
ANSI/ASTM D2020-1999 纸和纸板耐霉变(真菌)的试验方法 Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
ANSI/ASTM D2176-1997 用M.I.T.试验器测试纸耐折度的试验方法 Test Method for Folding Endurance of Paper by the M.I.T. Tester
ANSI/ASTM D2423-1985 蜡纸或纸板上表面蜡的试验方法 Test Method for Surface Wax on Waxed Paper or Paperboard
ANSI/ASTM D2482-1998 纸表面强度的测试方法(石蜡挑选法) Test Method for Surface Strength of Paper (Wax Pick Method)
ANSI/ASTM D3285-1993 非吸水性纸和纸板吸水率试验方法 Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (COBB TEST)
ANSI/ASTM D3344-1990 皱纹纸板蜡总含量测试方法 Test Method for Total Wax Content of Corrugated Paperboard
ANSI/ASTM D3521-1986 波纹纸板上表面蜡涂层的试验方法 Test Method for Surface Wax Coating on Corrugated Board
ANSI/ASTM D3522-1986 波纹纸板表面涂蜡和浸蜡的试验方法 Test Method for Applied Coating Wax and Impregnating Saturating Wax in Corrugated Board Facing
ANSI/ASTM D3708-1988 在涂层加工中使用的蜡的重量的试验(05.03) Weight of Wax Applied During Curtain Coating Operation, Test for (05.03)
ANSI/ASTM D4714-1992 测定湿热对纸和纸板性能影响的方法 Test Method for Determination of Effect of Moist Heat on Properties of Paper and Board
ANSI/ASTM D4988-1996 测定以碳酸钙形式展现纸碱性的试验方法 Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
ANSI/ASTM D5039-1997 纸反面识别的试验方法 Test Methods for Identification of Wire Side of Paper
ANSI/ASTM D528-1997 纸和纸板的机器定向试验方法 Test Method for Machine Direction of Paper and Paperboard
ANSI/ASTM D5342-1997 纸和纸板耐弯曲试验方法(Taber式试验机) Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ANSI/ASTM D5455-1993 短时间里液体被吸入纸内的试验方法(BRISTOW试验) Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
ANSI/ASTM D548-1997 纸的水溶酸碱度测试方法 Test Method for Water-Soluble Acidity or Alkalinity of Paper
ANSI/ASTM D5625-1997 铺开纸张和纸制品的长度、宽度和面积测量方法 Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ANSI/ASTM D5650-1997 在0-10 Taber硬挺度单位扩展范围内使用Taber型硬挺度试验仪的试验方法 Test Method for Use of the Taber-Type Tester for Stiffness in the Expanded 0-10 Taber Stiffness Unit Range
ANSI/ASTM D5802-1995 吸水纸制品吸附作用测试方法(用重力原理测定吸附率和容量) Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
ANSI/ASTM D585-1997 单批纸、纸板、纤维纸板和相关产品的取样和验收惯例 Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Products
ANSI/ASTM D586-1997 纸浆、纸和纸产品灰分含量测试方法 Test Method for Ash in Pulp, Paper, and Paper Products
ANSI/ASTM D589-1997 纸(15°漫射光源、89%反射底版和纸底版)不透明度的试验方法 Test Method for Opacity of Paper (15° Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
ANSI/ASTM D590-1993 纸中石蜡含量测试方法 Test Method for Petroleum Wax in Paper
ANSI/ASTM D643-1997 用塑柏试验机进行纸耐折叠性试验的试验方法 Test Method for Folding Endurance of Paper by the SchopperTester
ANSI/ASTM D644-1999 用烘干法测定纸和纸板湿气含量的方法 Test Method for Moisture Content of Paper and Paperboard by Oven Drying
ANSI/ASTM D645/D 645M-1997 纸和纸板的厚度用试验方法 Test Methods for Thickness of Paper and Paperboard
ANSI/ASTM D645-1997 纸与纸板厚度测试方法 Test Methods for Thickness of Paper and Paperboard
ANSI/ASTM D646-1996 纸张及纸板基本重量测试方法(单位面积重量) Test Method for Grammage of Paper and Paperboard (Weight Per Unit Area)
ANSI/ASTM D6789a-2002 用氙弧曝光装置进行打印纸和书写纸加速照明老化的试验方法 Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
ANSI/ASTM D685-1993 测试用纸和纸产品的调整惯例 Practice for Conditioning Paper and Paper Products for Testing
ANSI/ASTM D686-1996 纸和纸板中无机填料和无机涂料的定性分析试验方法 Test Method for Qualitative Examination of Mineral Filler and Mineral Coating of Paper
ANSI/ASTM D689-2003 纸张内部抗撕裂性的试验方法 Test Method for Internal Tearing Resistance of Paper
ANSI/ASTM D722-1993 纸耐油脂性试验方法(松节油法) Test Method for Grease Resistance of Paper (Turpentine Test)
ANSI/ASTM D724-1999 纸表面润湿性的试验方法(接触角法) Test Method for Surface Wettability of Paper (Angle-Of-Contact Method)
ANSI/ASTM D726-1994 无孔纸透气阻力试验方法 Test Method for Resistance of Nonporous Paper to Passage of Air
ANSI/ASTM D774/D 774M-1997 纸的破裂强度用试验方法 Test Method for Bursting Strength of Paper
ANSI/ASTM D776-1992 测定干热对纸和纸板性能影响的试验方法 Test Method For Determination Of Effect Of Dry Heat On Properties Of Paper And Board
ANSI/ASTM D778-1997 纸萃取物的氢离子浓度(PH)的试验方法(热萃取和冷萃取法) Test Methods for Hydrogen Ion Concentrate (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
ANSI/ASTM D779-2003 用干式指示计法检测纸张和纸板及其它薄板材料耐水性的试验方法 Test Method For Water Resistance Of Paper, Paperboard, And Other Sheet Materials By The Dry-Indicator Method
ANSI/ASTM D824-1994 用吸水纸测定吸水率的方法 Test Method for Rate of Absorption of Water by Bibulous Papers
ANSI/ASTM D828-2002 纸和纸板抗扯裂强度试验方法 Test Method for Tensile Properties of Paper and Paperboard Using
ANSI/ASTM D829-1997 纸和纸制品湿抗拉断裂强度试验方法 Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
ANSI/ASTM D834-1990 蜡纸20度镜光泽试验方法 Test Method for 20-Deg Specular Gloss of Waxed Paper
ANSI/ASTM D918-1993 纸和纸板的抗粘结性标准试验方法 Test Method For Blocking Resistance Of Paper And Paperboard
ANSI/ASTM D919-1997 纸和纸板铜含量测试方法 Test Method For Copper Number Of Paper And Paperboard
ANSI/ASTM D982-2006 纸和纸板中有机氮试验方法 Method of Test for Organic Nitrogen in Paper and Paperboard
ANSI/ASTM D984-1997 纸中可还原硫的测试方法 Test Methods for Reducible Sulfur In Paper
ANSI/ASTM D985-1997 纸浆、纸和纸板亮度试验方法(457 NM时的定向反射) Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 Nm)
ANSI/ASTM D3376-2000 用于电绝缘产品纸浆测试与取样试验方法 Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ANSI/ASTM D6101-2000 利用图形分析法进行纸板、纸和纸浆矿渣中等价黑区(EBS)的测试方法 Test Method for Equivalent Black Area (EBS) of Dirt in Pulp, Paper and Paperboard by Image Analysis
ANSI/ASTM D6148-1997 粘性检验惯例 Practice for the Examination of Stickies
ANSI/ASTM D4826-1997 纸浆、纸和纸板的计量单位和转换系数惯例 Practice for Units of Measurements and Conversion Factors for Pulp, Paper, and Paperboard
ANSI B151.15-1985 塑料机械.挤注吹塑机.制造,维护和使用的安全要求 Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Construction, Care and Use
ANSI B151.2-1982 塑料机械.薄膜铸塑机.制造,维护和使用 Plastics Machinery - Film Casting Machines - Construction, Care and Use
ANSI B151.4-1982 塑料机械.吹塑薄膜取出设备和辅助设备.制造,维护和使用 Plastics Machinery - Blown Film Takeoff and Auxiliary Equipment - Construction, Care and Use
ANSI B28.1-2000 橡胶工业中磨床和砑光机的安全规范 SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER AND PLASTICS INDUSTRIES This is Now Copyrighted by RMA
ANSI/ASTM D957-1995 工业用塑料模具模具表面温度测定的实施规程 Practice for Determining Mold Surface Temperature of Commercial Molds for Plastics (08.01)
ANSI/SPI B151.1-2007 塑料机械.卧式喷射模塑机.制造、维护和使用的安全要求 Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use
ANSI/SPI B151.15-2003 挤压吹塑模压机的建造、保养和使用 Extrusion Blow Molding Machines, Construction, Care, and Use of
ANSI/SPI B151.21-2003 注坯吹塑模机建造、保养和使用的安全性要求 Injection Blow Molding Machines, Safety Requirements for the Construction, Care, and Use of
ANSI/SPI B151.2-1999 薄膜铸塑机械.安装、维护和使用 Film Casting Machines - Construction, Care, and Use
ANSI/SPI B151.27-2003 塑料机械.与卧式注射成型机一起使用的机器人.集成、维护和使用的安全要求 Plastics Machinery - Robots Used with Horizontal Injection Molding Machines - Safety Requirements for the Integration, Care, and Use
ANSI/SPI B151.4-1999 吹膜检波和辅助设备.安装、维护和使用 Blown Film Take-Off and Auxiliary Equipment - Construction, Care, and Use
ANSI A136.1-2008 瓷砖铺设用有机粘结剂用规范 Specifications for Organic Adhesives for Installation of Ceramic Tile
ANSI/ASTM D2235-2004 ABS塑料管道和配件用液状粘固剂规范 Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ANSI/ASTM D3122-1995 苯乙烯橡胶塑料管和配件溶剂接合剂规范 Specification for Solvent Cements for Styrene-Rubber Plastic Pipe and Fittings
ANSI/ASTM D3138-2004 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范 Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ANSI/ASTM D3236-1988 热熔性胶粘剂和涂层材料的表观密度的试验方法(05.02) Apparent Viscosity of Hot Melt Adhesives and Coating Materials, Method of Test for (05.02)
ANSI/ASTM E866-1996 黏结在蜂窝结构防护板上的铝合金防腐粘结底层胶粘材料规范 Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11)
ANSI/ASTM C581-2003 液体设备的玻璃纤维增强结构用热固性树脂耐化学腐蚀性测定的实施规范 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
ANSI/ASTM D2290-2004 用分离盘法进行环状或管状和增强塑料表观拉伸强度的试验方法 Test Method for Apparent Tensile Strength of Ring or Tubular Plastics and Reinforced Plastics by Split Disk Method
ANSI/ASTM D3841-2001 玻璃纤维增强聚酯塑料板规范 Specification for Glass Fiber-Reinforced Polyester Plastic Panels
ANSI/ASTM D3982-2003 接触压模制玻璃纤维增强热固性树脂管和护罩规范 Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Duct and Hoods
ANSI/ASTM D4385-1995 热固增强塑料拉挤成型产品可视缺陷分类的实施规程 Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products (94-3, Items 58, 100) (08.03)
ANSI/ASTM D4398-2007 用板单面曝光法测定玻璃纤维增强热固性树脂耐化学性的试验方法 Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure
ANSI/ASTM D4476-1997 纤维增强拉挤塑料棒弯曲特性试验方法 Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ANSI/ASTM D4923-2001 增强热固性塑料杆规范 Specification for Reinforced Thermosetting Plastic Poles
ANSI/NEMA LD-3-2005 高压装饰层压板 High Pressure Decorative Laminates
ANSI/ASTM D1621-2000 泡沫硬质塑料压力特性试验方法(08.01) Test Method for Compressive Properties of Rigid Cellular Plastics (08.01)
ANSI/ASTM D1622-1998 刚性泡沫塑料表观密度测试方法(08.02) Test Method for Apparent Density of Rigid Cellular Plastics (08.02)
ANSI/ASTM D1667-1997 柔软泡沫塑料－氯乙烯共聚物和大量分子聚合物规范 Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
ANSI/ASTM D2842-2001 硬质泡沫塑料吸水性测试方法 Test Method for Water Absorption of Rigid Cellular Plastics (08.02)
ANSI/ASTM D2856-1994 用空气比重瓶测定硬质泡沫塑料的开孔率（孔隙率）的试验方法(08.02) Open-Cell Content (Porosity) of Rigid Cellular Plastics by the Air Pycnometer, Test Method for (08.02)
ANSI/ASTM D3453-2001 软质泡沫材料规范.家具、汽车软垫、床垫及类似用途用氨基甲酸乙酯 Specification for Flexible Cellular Materials - Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
ANSI/ASTM D3574-2001 软泡沫橡胶试验方法.厚板、粘结和凹型聚胺脂沫 Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams
ANSI/ASTM D3575-2001 烯烃聚合物柔性多孔材料试验方法 Test Methods for Flexible Cellular Materials Made from Olefin Polymers
ANSI/ASTM D3576-1998 硬质泡沫塑料孔径尺寸测试方法(08.02) Test Method for Cell Size of Rigid Cellular Plastics (08.02)
ANSI/ASTM D4819-1997 聚烯烃塑料制软多孔材料规范 Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ANSI/ASTM D1025-1991 聚合丁二烯中不挥发性残渣的试验方法 Test Method for Nonvolatile Residue of Polymerization Grade Butadiene (05.01)
ANSI/ASTM D4322-1996 利用液面上空间气相色谱法检测苯乙烯-丙烯腈大量分子聚合物中残留丙烯腈单体的方法 Test Method for Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
ANSI/ASTM D4474-1991 苯乙烯热塑性塑料弹性体注塑模塑和挤塑材料的规格 Specification for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (08.03)
ANSI/ASTM D4550-1998 热塑醚.酯类弹性体规范(TEEE) (08.03) Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (08.03)
ANSI/ASTM D5021-1995 热塑弹性体氯乙烯混合物规范 Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (Tecea) (08.03)
ANSI/ASTM D5508-1994 用液上气相色谱法对苯乙烯-丙烯腈共聚物和丁腈橡胶中残留丙烯腈单体的定量测试方法 Test Method for Quantitation of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (08.03)
ANSI/SAE J200-1998 橡胶材料的分类体系 Classification System for Rubber Materials
ANSI/ASTM D5946-2001 利用水触角测量仪进行电晕处理聚合物薄膜的试验方法 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ANSI/ASTM D5989-1998 尼龙压塑和单体注塑件形状规范 Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
ANSI/ASTM D6247-1998 通过X射线荧光光谱法对聚烯烃中元素含量分析的试验方法 Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry
ANSI/ASTM D6265-1998 使用挤压机过滤器试验将污染物从聚合物中分离的操作规程 Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ANSI/ASTM D6358-1999 聚合物喷模塑和压塑材料分类制度 Classification System for Poly(Phenylene Sulfide) Injection Molding and Extrusion Materials
ANSI/AWS G1.1M/G 1.1-2006 热塑料的超声波组合指南 Guide to Ultrasonic Assembly of Thermoplastics
ANSI/SPI B151.20-1999 塑料薄膜和薄片缠绕机.生产、维护和使用 Plastic Film and Sheet Winding Machinery - Manufacture, Care, and Use
ANSI/SPI B151.5-2000 塑料薄膜和片缠绕机.生产、维护和使用 Plastic Film and Sheet Winding Machinery - Manufacture, Care, and Use
ANSI/ASTM C838-2001 人造砷-碳与石墨塑型容积密度测试方法 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
ANSI/ASTM F1312-1990 绝热、高温、耐火粘土砖的规范 Specification for Brick, Insulating, High-Temperature, Fire Clay
ANSI O5.2-2006 公用事业建筑用建筑层压胶合板(木制品用) Structural Glued Laminated Timber for Utility Structures (for Wood Products)
ANSI O5.3-2002 木制品.实心锯木交叉撑.规范和尺寸 Wood Products - Solid Sawn Wood Crossarms and Braces - Specifications and Dimensions
ANSI/AITC A190.1-2007 木制品.结构胶合层压木材 Wood Products - Structural Glued Laminated Timber
ANSI/ASTM D1860-1995 木材潮湿和碳酸类防腐剂试验方法 Test Method for Moisture and Creosote-Type Preservative in Wood
ANSI/ASTM D2017-1996 木材抗自然腐烂的加速实验室试验方法 Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ANSI/ASTM D4278-1996 无机化学分析用木质样品制备的湿灰化程序试验方法 Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
ANSI/ASTM D4445-1996 控制未处理木材的变色和形状用杀菌剂试验方法(实验室法) Method for Testing Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ANSI/ASTM D4446-1996 暴露在液态水环境下测定未处理木材膨胀差和防水配方抗膨胀效率的方法 Test Method for Determining the Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood when Exposed to Liquid Water Environments
ANSI/ASTM E69-1996 用火管式装置测定经过处理的木材燃烧特性的方法 Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
ANSI/ICC 400-2007 原木结构设计、建筑和性能标准 Standard on Design, Construction and Performance of Log Structures
ANSI/IEEE 1217-2001 木材销售和运输线结构物的防护处理指南 Guide for Preservative Treatment of Wood Distribution and Transmission Line Structures
ANSI/ASTM D5224-1993 热固性模塑化合物压缩模塑样品的实施规程 Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds (08.03)
ANSI/ASTM F1348/F 1348M-1997 气动旋转除锈机规范 Specification for Pneumatic Rotary Descaling Machines
ANSI/ASTM A811-1997 粉末冶金技术制造的软磁铁零件规范 Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
ANSI/ASTM A839-1997 软磁性磷铁粉末冶金技术零件规范 Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
ANSI/ASTM A904-1998 50镍-50铁粉末冶金(P/M)软磁合金规范 Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
ANSI/ASTM B810-2001 通过铜质量的变化对大气腐蚀试验室进行校正的试验方法 Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ANSI/ASTM B826-1996 电阻探头监测大气腐蚀试验的方法 Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ANSI/ASTM D130-2004 用铜片生锈试验检查石油产品对铜腐蚀性的试验方法 Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
ANSI/ASTM D1748-2002 在湿度室里测定金属防腐剂的防锈性能的试验方法 Rust Protection by Metal Preservatives in the Humidity Cabinet, Method of Test for (05.01)
ANSI/ASTM D1838-2007 液化石油(LP)气腐蚀铜带的试验方法 Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ANSI/ASTM D3316-1996 含铜全氟化乙烯稳定性试验方法 Test Method for Stability of Perchloroethylene with Copper
ANSI/ASTM D4627-1992 水溶性金属加工液的铁屑腐蚀用试验方法 Test Method for Iron Chip Corrosion for Water Dilutable Metalworking Fluids
ANSI/NACE RP0300-2003 再循环冷却水系统的腐蚀性和污垢控制添加剂的导柱刻度评价 Pilot-Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems
ANSI/NACE TM0177-2006 金属在硫化氢(H2S)环境下耐特殊环境开裂的实验室测试 Laboratory Testing of Metals for Resistance to Specific Forms of Environmental Cracking H2S Environments
ANSI/ASTM D6353-2006 铝生产中预焙阳极的取样方案和芯取样指南 Guide for Sampling Plan and Core Sampling of Prebaked Anodes Used in Aluminum Production
ANSI/ASTM D6354-2004 用于铝生产的碳阴极块的取样计划和芯取样的指南 Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ANSI/ASTM D6744-2005 采用保护热流计技术测定阳极碳热导率的方法 Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ANSI/ASTM D6745-2005 电极碳线性热膨胀试验方法 Test Method for Linear Thermal Expansion of Electrode Carbons
ANSI GPTC Z 380.1 1998 Addendum 3-2000 燃气传输和分配管道系统指南 1998-2000 Guide for Gas Transmission and Distribution Piping Systems 1998-2000
ANSI/API 576-2000 压力释放设备检查 Inspection of Pressure-Relieving Devices
ANSI/API RP1162-2003 管道操作者的公共注意项 Public Awareness Programs for Pipeline Operators
ANSI/ASTM D6078-2004 通过磨损负载下气缸上球润滑性鉴定器(SLBOCLE)评价柴油燃料润滑性的试验方法 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-On-Cylinder Lubricity Evaluator (SLBOCLE)
ANSI/ASTM D6849-2002 试验样品气瓶中液化石油气的储存和使用惯例 Practice for Storage and Use of LPG in Sample Cylinders for LPG Test Methods
ANSI/ASTM D7096-2005 用大口径毛细管气相色谱法测定汽油沸腾范围分布的试验方法 Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-bore Capillary Gas Chromatography
ANSI/ASTM D7344-2007 大气压力下石油产品的蒸馏用试验方法(小型法) Test Method for Distillation of Petroleum Products at Atmospheric Pressure (mini Method)
ANSI/ASTM D7345-2007 石油产品的蒸馏用试验方法(微量蒸馏法) Test Method for Distillation of Petroleum Products (micro Distillation Method)
ANSI/ASTM F1172-1988 正向位移式容积测量的燃油计的规范 Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ANSI/ASTM F1973-2005 聚乙烯(PE)和聚酰胺11（PA11）燃料气分配系统中工厂装配的阳级冒口和过渡配件规范 Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems
ANSI/ASTM F2138-2001 天然气设备溢流阀规范 Specification for Excess Flow Valves for Natural Gas Service
ANSI/GPTC Z380.1-2003 Addendum 4-2006 燃气传输和分配管道系统指南2003版 附录4 Guide for Gas Transmission and Distribution Piping Systems 2003 Edition - Addendum 4
ANSI/GPTC Z380.1-2003 Addendum 6-2006 燃气传输和分配管道系统指南 Guide for Gas Transmission and Distribution Piping Systems
ANSI/GPTC Z380.1-2003 Addendum 7-2007 气体运输和分配管道系统指南 Guide for Gas Transmission and Distribution Piping Systems
ANSI/GPTC Z380.1-2003 Addendum 9-2007 燃气传输和配油管道系统用指南 Guide for Gas Transmission and Distribution Piping Systems
ANSI/GPTC Z380.1-2003 Addendum No. 3-2005 气体运输和分配用管道系统的GPTC指南 GPTC Guide for Gas Transmission and Distribution Piping Systems
ANSI/GPTC Z380.1-2003 Addendum No. 5-2006 燃气传输和分配管道系统指南 Guide for Gas Transmission and Distribution Piping Systems
ANSI/GPTC Z380.1-2003 Addendum No. 8-2007 气体运输和分配用管道系统指南 Guide for Gas Transmission and Distribution Piping Systems
ANSI/OPEI B71.10-2008 小型的野外地面支持的户外电动设备的汽油燃料系统的试验规程 Small Off-Road Ground-Supported Outdoor Power Equipment Gasoline Fuel System - Test Procedures
ANSI/UL 1238-2007 与易燃液体撒布装置一同使用的控制设备用标准 Standard for Control Equipment for Use with Flammable Liquid Dispensing Devices (Proposals dated 3/16/07)
ANSI/UL 180-1997 燃油炉燃料用液位指示规的安全标准 Standard for Safety for Liquid-Level Indicating Gauges for Oil Burner Fuels (Bulletin dated January 5, 2007)
ANSI/UL 25-2005 易燃和可燃液体和液化石油气(LP-Gas)用测量仪表 Meters for Flammable and Combustible Liquids and LP-Gas
ANSI/ASTM D127-2005 石油蜡(包括矿脂的)滴落熔点的试验方法 Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
ANSI/ASTM D1321-2004 石油蜡的针入度试验方法 Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09)
ANSI/ASTM D1465-2004 石油蜡的熔点和粘着点的试验方法 Test Method for Blocking and Picking Points of Petroleum Wax
ANSI/ASTM D1832-2004 石油蜡的过氧化值的试验方法 Test Method for Peroxide Number of Petroleum Wax (05.01, 15.09)
ANSI/ASTM D1833-1987 石蜡气味的试验方法 Test Method for Odor of Petroleum Wax
ANSI/ASTM D2318-1998 焦油和硬沥青中喹啉不溶物(QI)含量的试验方法 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
ANSI/ASTM D2319-1998 硬沥青软化点的试验方法(空气中立方块试验法) Test Method for Softening Point of Pitch (Cube-In-Air Method)
ANSI/ASTM D2320-1998 固体沥青密度(比重)测试方法 Test Method for Density (Specific Gravity) of Solid Pitch (Pycnometer Method) (Reinstatement) (formerly D2320-87)
ANSI/ASTM D2415-1998 测试煤焦油和硬沥青中灰分的试验方法 Test Method for Ash in Coal Tars and Pitches
ANSI/ASTM D2669-2006 混有添加剂的石蜡的表观粘度的试验方法(热熔化法) Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives Hot Melts
ANSI/ASTM D3235-2006 石油蜡中溶剂可萃取物的测试方法 Test Method for Solvent Extractables in Petroleum Waxes
ANSI/ASTM D3944-1988 石蜡凝点 Solidification Point of Petroleum Wax (05.02)
ANSI/ASTM D4072-1998 测定焦油和硬沥青中甲苯不溶物质(TI)含量的试验方法 Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ANSI/ASTM D4419-1990 用差分扫描量热法测定石油蜡转变温度的试验方法 Test Method for Determination of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (05.02)
ANSI/ASTM D4715-1998 测定焦油和硬沥青焦化值的试验方法(Alcan) Test Method for Coking Value of Tar and Pitch (Alcan)
ANSI/ASTM D4892-1989 固体沥青密度测定方法(氦比重瓶法) Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ANSI/ASTM D4893-1994 沥青挥发性测定方法 Test Method for Determination of Pitch Volatility
ANSI/ASTM D5018-1989 煤焦油和石油沥青剪切粘度测试方法 Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
ANSI/ASTM D5442-1993 用气相色谱法分析石油蜡的试验方法 Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ANSI/ASTM D61-1975 硬沥青软化点试验方法(水中方块法) Test Method for Softening Point of Pitches (Cube-In-Water Method)
ANSI/ASTM D612-1988 石蜡中可碳化物质的试验方法 Test Method for Carbonizable Substances in Paraffin Wax
ANSI/ASTM D721-2006 石油蜡中石油含量的试验方法 Test Method for Oil Content of Petroleum Waxes
ANSI/ASTM D7280-2007 用不锈钢坩埚过滤焦油和沥青的喹啉不溶物(QI)含量的试验方法 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ANSI/ASTM D87-2007 石蜡熔点的试验方法(冷却曲线) Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ANSI/ASTM D937-2007 石油脂的针入度的试验方法 Test Method for Cone Penetration of Petrolatum
ANSI/ASTM D938-2005 包括凡士林的石油蜡凝固点的试验方法 (05.01) Congealing Point of Petroleum Waxes Including Petrolatum, Method of Test for (05.01)
ANSI/ASTM D95-2005 蒸馏法测定石油产品和沥青材料含水量的试验方法 Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ANSI/(NFPA) T2.13.1 R4-2007 推荐实施规程.液压传动.工业系统中耐火液的使用 Recommended practice - Hydraulic fluid power - Use of fire resistant fluids in industrial systems
ANSI/(NFPA) T2.13.14-2007 推荐实施规程.液压传动.符合环保标准的液体的使用 Recommended practice - Hydraulic fluid power - Use of environmentally acceptable fluids
ANSI/ASTM D2070-1991 液压油热稳定性的试验方法 Test Method for Thermal Stability of Hydraulic Oils
ANSI/ASTM D2619-1995 液压油的水解稳定性的试验方法(酒瓶试验法)(05.02) Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method), Test Method for (05.02)
ANSI/ASTM D3520-2004 热处理液体淬火时间的试验方法.磁性冷却速度试验器法 Test Method for Quenching Time of Heat-treating Fluids - Magnetic Quenchometer Method
ANSI/ASTM D3700-2006 用浮式活塞汽缸获得液化石油气(LPG)样品的实施规程 Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ANSI/ASTM D4898-1990 重力测量分析液压油不溶性污染试验方法 Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ANSI/ASTM D4998-1995 评定拖拉机液压油耐磨特性的试验方法 Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids (05.03)
ANSI/ASTM D5534-1999 液压液汽相生锈预防特性的测试方法 Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ANSI/ASTM D5621-2007 液压液的油声波剪切稳定性用试验方法 Test Method for Sonic Shear Stability of Hydraulic Fluid (05.03)
ANSI/ASTM D6006a-1997 液压液生物降解性的评定指南 Guide for Assessing Biodegradabillty of Hydraulic Fluids
ANSI/ASTM D6046-2002 环境冲击用液压液的分类 Classification of Hydraulic Fluids for Environmental Impact
ANSI/ASTM D6158-2005 矿物液压油规范 Specification for Mineral Hydraulic Oils
ANSI/ASTM D6351-1999 液压油低温流动性和外观测定方法 Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ANSI/ASTM D6482-2006 通过搅拌冷却曲线分析测定含水聚合淬火剂冷却特性的试验方法(Tensi法) Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ANSI/ASTM D6546-2000 工业用液压油密封圈兼容性的测定试验方法和提议限制 Test Methods and Suggested Limits for Determining the Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ANSI/ASTM D6547-2000 双金属耦合润滑液流腐蚀性试验方法 Test Method for Corrosiveness of a Lubricating Fluid to a Bi-Metallic Couple
ANSI/ASTM D6549-2006 通过搅拌冷却曲线分析测定淬火剂冷却特性的试验方法 Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ANSI/ASTM D6666-2004 含水聚合淬火剂的评估指南 Guide for Evaluation of Aqueous Polymer Quenchants
ANSI/ASTM D6813a-2002 活塞泵的液压流体性能的评定指南 Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps
ANSI/ASTM D7044a-2004 可生物降解的耐火液压液规范 Specification for Biodegradable Fire Resistant Hydraulic Fluids
ANSI/API RP13M-2006 在静态条件下测量增产液和砾石填充液泄露的推荐实施规程 Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions
ANSI/API RP19C-2007 高压水砂破裂法和砾石包装作业用支撑剂性能的测量用推荐实施规程 Recommended Practice for Measurement of Properties of Proppants Used in Hydraulic Fracturing and Gravel-packing Operations
ANSI/ASTM D1091-2000 润滑油和添加剂中磷含量测试方法(05.01) Test Methods for Phosphorus in Lubricating Oils and Additives (05.01)
ANSI/ASTM D1092-2005 润滑脂表观粘度的测试方法 Test Method for Apparent Viscosity of Lubricating Greases
ANSI/ASTM D1263-1994 机动车车轮轴承润滑脂的泄漏倾向.试验方法 Leakage Tendencies of Automotive Wheel Bearing Greases, Method of Test for (05.01)
ANSI/ASTM D1264-2003 测定润滑脂的水冲洗特性的试验方法 Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ANSI/ASTM D128-1998 润滑油脂分析方法,(05.01)法 Analysis of Lubricating Grease, Methods of (05.01)
ANSI/ASTM D1403-2002 用1/4和1/2标度的锥形设备测定润滑脂针入度的试验方法 Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ANSI/ASTM D1404-1999 润滑脂中有害颗粒估计.试验方法 Estimation of Deleterious Particles in Lubricating Grease, Method for (05.01)
ANSI/ASTM D1478-2007 滚珠轴承润滑脂的低温扭矩试验方法 Test Method for Low-temperature Torque of Ball Bearing Grease
ANSI/ASTM D1662-2007 切割油中活性硫的试验方法 Test Method for Active Sulfur in Cutting Oils
ANSI/ASTM D1742-2006 存储中润滑油和脂分离的试验方法(05.01) Oil Separation from Lubricating Grease during Storage, Test Method for (05.01)
ANSI/ASTM D1743-2005 测定润滑脂防腐蚀特性的试验方法 Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ANSI/ASTM D1831-2001 润滑脂横向滚动稳定性测试方法 Test Method for Roll Stability of Lubricating Grease
ANSI/ASTM D217-2002 测定润滑脂针入度的试验方法 Test Methods for Cone Penetration of Lubricating Grease
ANSI/ASTM D2265-2006 超过宽温度范围的润滑脂的滴定点测试方法 Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ANSI/ASTM D2266-2001 润滑脂耐磨损特性试验方法(四球法) Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) (05.01)
ANSI/ASTM D2272-2002 用旋转式储气瓶测定蒸气涡轮机油氧化稳定性的标准试验方法(05.01) Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ANSI/ASTM D2273-2005 润滑油痕迹沉淀测试方法 Test Method for Trace Sediment in Lubricating Oils
ANSI/ASTM D2422-1997 用粘度系统对工业液体润滑剂的分类 Classification of Industrial Fluid Lubricants by Viscosity System
ANSI/ASTM D2509-2003 测量润滑脂承载能力的试验方法（泰姆肯试验法）(05.01) Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) (05.01)
ANSI/ASTM D2510-2004 固态薄膜润滑剂的粘合性的试验方法 Test Method for Adhesion of Solid Film Lubricants
ANSI/ASTM D2511-1983 干式固体薄膜润滑剂的热冲击敏感性的试验方法(05.01) Thermal Shock Sensitivity of Dry Solid Film Lubricants, Methods of Test for (05.01)
ANSI/ASTM D2595-1997 宽温度范围润滑脂蒸发损耗测试方法(05.01) Evaporation Loss of Lubricating Greases over Wide-Temperature Range, Method of Test for (05.01)
ANSI/ASTM D2596-1997 润滑脂超高压特性测量方法(四球法)(05.01) Method for Measurement of Extreme-Pressure Properties of Lubricating Greases (Four-Ball Method) (05.01)
ANSI/ASTM D2603-2001 含聚脂油的声剪切稳定性用试验方法 Test Method for Sonic Shear Stability of Polymer-Containing Oils
ANSI/ASTM D2625-1994 干性固态薄膜润滑剂的耐久（磨损）寿命和承载能力的测定方法(润滑剂耐热耐压法)(05.02) Determining Endurance (Wear) Life and Load-Carrying Capacity of Dry Sold Film Lubricants (Falex Method), Method for (05.02)
ANSI/ASTM D2649-2004 干性固态薄膜润滑剂的腐蚀特性的测定方法 Corrosion Characteristics of Dry Sold Film Lubricants, Method for Determining (05.02)
ANSI/ASTM D2670-1994 液体润滑剂的耐磨损性的测量方法(润滑剂的耐热耐压法)(05.02) Measuring Wear Properties of Fluid Lubricants (Falex Method), Method for (05.02)
ANSI/ASTM D2710-1999 电势滴定法测定石油烃类溴指数的方法(05.02) Bromine Index of Petroleum Hydrocarbons by Electrometric Titration, Test Method for (05.02)
ANSI/ASTM D2711-2001 润滑油乳化分解性测定方法(05.02) Demulsibility Characteristics of Lubricating Oils, Method of Test for (05.02)
ANSI/ASTM D2711a-2001 润滑油抗乳化性特征试验方法 Test Method for Demulsibility Characteristics of Lubricating Oils
ANSI/ASTM D2715-1992 真空中润滑剂挥发率的试验方法 Test Method for Volatilization Rates of Lubricants in Vacuum
ANSI/ASTM D2782-2002 润滑流体耐极端压力特性的测量方法(泰姆肯试验方法)(05.02) Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02)
ANSI/ASTM D2783-2003 润滑液极压特性测量的试验方法(四球法) Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Four-ball Method
ANSI/ASTM D2878-1995 评估润滑油的表观蒸气压力和分子重量的方法(05.02) Method for Estimating Apparent Vapor Pressures and Molecular Weight of Lubricating Oils (05.02)
ANSI/ASTM D2879-1997 用液体蒸气压力计测定液体的蒸气压力-温度关系和初始分解温度的试验方法 Test Method for Vapor Pressure-temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ANSI/ASTM D2881-2003 金属加工流体和相关材料的分类(05.02) Classification of Metal Working Fluids and Related Materials
ANSI/ASTM D2883-1995 液体和固体材料反应的极限温度的试验方法(05.02) Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (05.02)
ANSI/ASTM D2893-2004 超高压润滑油的氧化特性的试验方法 Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils
ANSI/ASTM D2983-2004 用Brookfield粘度计测定机动车试验液体润滑剂的低温粘度的试验方法 Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02)
ANSI/ASTM D3233-1993 液体润滑剂的极端压力特性的测量方法(润滑剂耐热耐压法)(05.02) Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Methods), Methods for (05.02)
ANSI/ASTM D3244a-2007 利用试验数据确定产品质量与规格相符性的实施规程 Practice for Utilization of Test Data to Determine Conformance with Specifications
ANSI/ASTM D3336-2005 在高温条件下滚珠轴承润滑油脂寿命的测试方法 Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ANSI/ASTM D3340-2007 用火焰光度计测定润滑脂中锂和钠的试验方法 Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ANSI/ASTM D3342-1990 新（未用过的）冷轧润滑油在水中弥散的乳化稳定性的测量方法(05.02) Test Method for Dispersion Stability of New Unused Rolling Oil Dispersions in Water
ANSI/ASTM D3524-2004 用气相色谱法测定用过的柴油发动机油中柴油燃料稀释剂的试验方法 Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ANSI/ASTM D3525-2004 用气相色谱法测定已用汽油发动机油中汽油稀释剂的试验(05.02) Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography, Test for (05.02)
ANSI/ASTM D3527-2007 机动车轮轴轴承润滑脂的寿命性能用试验方法 Test Method for Life Performance of Automotive Wheel Bearing Grease
ANSI/ASTM D3603-2007 有水情况下汽轮机油的防锈特征试验方法(卧式圆盘法) Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ANSI/ASTM D3607-2007 用剥离法移除用过的机油中挥发性污染物的试验方法 Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
ANSI/ASTM D3704-1996 在震荡运动中用润滑剂耐热耐压试验机测定润滑脂的耐磨损特性的试验(05.02) Test Method for Wear Preventive Properties of Lubricating Greases Using the Falex Block on Ring Test Machine in Oscillating Motion
ANSI/ASTM D3705-1998 润滑液雾状属性标准测试方法 Standard Test Method for Misting Properties of Lubricating Fluids
ANSI/ASTM D3707-1989 用炉内加热试验法测定油中含水乳液的存储稳定性的试验方法(05.02) Storage Stability of Water-in-Oil Emulsions by the Oven Test Method, Test Method for (05.02)
ANSI/ASTM D3709-1989 低于室温循环条件下的油中含水乳液的稳定性的试验方法(05.02) Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions, Test Method for (05.02)
ANSI/ASTM D3711-1995 薄膜液体和蒸气的沉积趋势的试验方法(05.02) Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (05.02)
ANSI/ASTM D3825-1990 用快速发泡技术测定动态表面张力的方法 Test Method for Dynamic Surface Tension by the Fast Bubble Technique (15.02)
ANSI/ASTM D3828-2007 用小刻度闭杯试验器测定闪点的试验方法 Test Methods for Flash Point by Small Scale Closed Cup Tester
ANSI/ASTM D3829-2002 预测发动机润滑油边界泵送温度的试验方法 Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ANSI/ASTM D3946-1992 评价馏出水金属加工液抗菌性 Bioresistance of Water-Soluble Metal-Working Fluids (05.02)
ANSI/ASTM D4042-1993 轧钢厂冷轧油弥散物中灰粉和铁总含量的取样和试验 Rolling Oils, Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of (05.03)
ANSI/ASTM D4047-2005 用喹啉磷钼酸盐法测定润滑油及添加剂中磷含量的试验方法 Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ANSI/ASTM D4048-2002 用铜带生锈试验检测润滑油对铜腐蚀的方法 Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02)
ANSI/ASTM D4049-2006 测定润滑脂耐水喷射性用试验方法 Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ANSI/ASTM D4055-2004 薄膜过滤法测定戊烷不溶物 Pentane Insolubles by Membrane Filtration (05.02)
ANSI/ASTM D4056-2001 烃类和脂肪族脂化润滑剂中水的可溶性 Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
ANSI/ASTM D4170-1997 润滑脂磨损侵蚀防护试验方法(05.02) Test Method for Fretting Wear Protection by Lubricating Grease (05.02)
ANSI/ASTM D4172-1994 润滑液防磨性试验方法(四球法) Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method), Method of Test for (05.02)
ANSI/ASTM D4178-1982 湿气分析仪校准惯例 Calibrating Moisture Analyzers, Practice for (05.02)
ANSI/ASTM D4289-2003 润滑脂与弹性体兼容性的试验方法 Method of Testing Compatibility of Lubricating Grease with Elastomers (05.02)
ANSI/ASTM D4290-2007 在加速条件下测定汽车轮轴轴承润滑脂渗漏倾向的试验方法 Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ANSI/ASTM D4291-2004 用过的发动机油中痕量乙二醇的试验方法 Trace Ethylene Glycol in Used Engine Oil, Test Method for (05.02)
ANSI/ASTM D4293-1983 涡轮机润滑用磷酸盐酯基液体规范 Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02)
ANSI/ASTM D4304a-2006 汽轮机或燃气轮机用矿物润滑油规范 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
ANSI/ASTM D4425-1997 离心法从润滑脂中分离油的方法(Koppers法)(05.02) Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) (05.02)
ANSI/ASTM D4485a-2007 发动机油的性能规范 Specification for Performance of Engine Oils
ANSI/ASTM D4636-1998 液压油、航空透平引擎润滑剂和其他高精炼油的腐蚀与氧化稳定性测试方法 Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ANSI/ASTM D4683-2004 在高温和高剪切率下用锥形承载模拟器测量粘度的标准试验方法 Standard Test Method to Measure Viscosity by Tapered Bearing Simulator at High Temperature and High Shear Rate (05.03)
ANSI/ASTM D4684-2006 测定低温发动机油屈服应力和表观粘度的试验方法 Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature (05.03)
ANSI/ASTM D4693-2007 油脂润滑的车轮轴承低温扭矩的试验方法 Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ANSI/ASTM D4741-2006 利用锥形塞黏度计测定高温与高剪切速率条件下粘性试验方法 Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ANSI/ASTM D4742a-2002 用氧气薄膜吸收法测定汽车发动机油氧化稳定性的方法 Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT), Test Method for (05.03)
ANSI/ASTM D4857-2004 令二冲程循环汽油发动机(外侧发动机除外)中活塞环结胶和活塞沉积物最小化的润滑剂作用的测定 Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03)
ANSI/ASTM D4858-2002 润滑剂促使两冲程汽油发动机预点火可能性的测定方法 Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines, Test Method for (05.03)
ANSI/ASTM D4859-1997 二冲程汽油发动机用TC润滑剂规范(05.03) Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines - TC, Specification for (05.03)
ANSI/ASTM D4863-2002 两冲程汽油发动机润滑剂的润滑性测定 Determination of the Lubricity of Two-Stroke Cycle Gasoline Engine Lubricants (05.03)
ANSI/ASTM D4927-2005 润滑剂和添加料的元素分析试验方法.用波长色散X射线荧光分析法测定钡、钙、磷、硫和锌(05.02) Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence (05.02)
ANSI/ASTM D4950-2001 机动车设备用润滑油的分类和规范 Classification and Specification for Automotive Service Greases
ANSI/ASTM D4951-2006 感应耦合等离子体原子发射光谱法测定润滑油添加元素的方法 Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ANSI/ASTM D5133-2005 温度扫描法测试润滑油的低温低剪切率粘性/温度关系的试验方法 Test Method for Low Temperature, Low Shear Rate Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ANSI/ASTM D5182-1997 油脂抗磨损(擦伤)负荷能力评定试验方法 Test Method for Evaluating the Scuffing (Scoring) Load Capacity of Oils (05.03)
ANSI/ASTM D5183-2005 用四球磨损试验机测定润滑油摩擦系数的试验方法 Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ANSI/ASTM D5293-2004 用冷起动模拟法测定30℃至50℃之间发动机油表观粘度的试验方法 Apparent Viscosity of Engine Oils - Between 30 and 50°C Using the Cold-Cranking Simulation, Test Method for (05.03)
ANSI/ASTM D5302a-2001 在低温轻型条件下操作的用汽油作燃料的火花点火内燃机中抑制沉积物形成和耐磨用汽车发动机油评价的新试验方法 New Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in Spark-Ignition Internal-Combustion Engine Fueled with Gasoline and Operated Under Low Temperature, Light-Duty Can (05.03)
ANSI/ASTM D5453-2007 用紫外线荧光法测定轻质烃、火花点燃式发动机燃料、柴油机燃料和机器润滑油中硫总含量的试验方法 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ANSI/ASTM D5481-2004 用多孔毛细管粘度计在高温和高剪切率下测量表面粘性的试验方法 Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
ANSI/ASTM D5483-2005 利用压力差示扫描量热法测定润滑油脂氧化诱导时间的试验方法 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ANSI/ASTM D5579-2006 循环耐久试验中人力操纵传动润滑剂耐热性评估测试方法 Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
ANSI/ASTM D5619-2004 用攻丝扭矩试验机比较金属切削液的方法 Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine (05.03)
ANSI/ASTM D5620-1999 在排水和干燥模式下利用针式和V-块式试验机评价薄膜流动性润滑剂性能的测试方法 (05.03) Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and V-Block Test Machine (05.03)
ANSI/ASTM D566-2002 润滑脂滴点试验方法(05.01) Test Method for Dropping Point of Lubricating Grease (05.01)
ANSI/ASTM D5704-2007 手动传输和主传动轴用润滑油的热稳定性和氧化稳定性评价的试验方法 Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
ANSI/ASTM D5706-2005 用高频、线性振动(SRV)试验机测定润滑油脂超压特性的试验方法(05.03) Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (05.03)
ANSI/ASTM D5707-2005 用于高频、线性振动(SRV)试验机测量润滑油脂的摩擦力与磨损特性测定试验 Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-frequency, Linear-oscillation (SRV) Test Machine
ANSI/ASTM D5760-2005 人工传输齿轮润滑剂性能规范(05.03) Specification for Performance of Manual Transmission Gear Lubricants (05.03)
ANSI/ASTM D5763-1995 用通用的玻璃器皿测定齿轮油氧化和热稳定特性的试验方法 Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware (05.03)
ANSI/ASTM D5770-2002 氧化测试期间润滑油酸值半定量微观测定用试验方法 Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ANSI/ASTM D5800a-2005 Noack法测定润滑油的蒸发损失的试验方法 Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ANSI/ASTM D5862-2006 二冲程循环涡轮增压6v92ta柴油发动机机油评价的试验方法 Test Method for Evaluation of Engine Oils in the Two-Stroke Cycle Turbo-Supercharged 6v92ta Diesel Engine
ANSI/ASTM D5967-2007 评定T-8柴油发动机中柴油机润滑油的试验方法 Test Method for Evaluation of Diesel Engine Oils in the T-8 Diesel Engine
ANSI/ASTM D5968-2006 评定柴油发动机油腐蚀性的试验方法 Test Method for Evaluation of the Corrosiveness of Diesel Engine Oil
ANSI/ASTM D5969-2005 在含稀释合成海水环境下测定润滑脂防腐性能的试验方法 Test Method for Corrosion-Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments
ANSI/ASTM D6074-1999 氢类润滑剂机油特性指南 Guide for Characterizing Hydrocarbon Lubricant Base Oils
ANSI/ASTM D6082-2006 润滑油高温泡沫特性试验方法 Test Method for High Temperature Foaming Characteristics of Lubricating Oils
ANSI/ASTM D6121a-2006 评价在低速和高扭矩条件下准双曲面主齿轮驱动轴用润滑剂负载能力的试验方法 Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ANSI/ASTM D6138-2007 在动态潮湿条件下润滑脂的防腐蚀特性测定的试验方法(EMCOR方法) Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
ANSI/ASTM D6139-2000 润滑剂或其组分需氧水生生物降解测定的标准Gledhill摇动烧瓶试验法 Standard Gledhill Shake Flask Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or their Components
ANSI/ASTM D6184-1997 从润滑脂中分离油的标准试验方法(锥形筛方法) Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
ANSI/ASTM D6185-1997 润滑脂两元混合物兼容性评估试验方法 Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ANSI/ASTM D6186-1997 利用压力差示扫描量热法(PDSC)测定润滑油氧化诱导时间定测定方法 Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ANSI/ASTM D6203-2006 导轨润滑剂热稳定性的试验方法 Test Method for Thermal Stability of Way Lubricants
ANSI/ASTM D6335-2002 用热氧化机油模拟试验测定高温沉淀物的试验方法 Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
ANSI/ASTM D6375-2005 用热重分析仪(TGA)Noack法测定润滑油蒸发损耗的试验方法 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ANSI/ASTM D6425-2005 用SRV试验机测量EP润滑油摩擦和磨损特性的试验方法 Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine
ANSI/ASTM D6439-2005 蒸汽、气体和水电涡轮润滑系统的清洁、冲洗和纯化指南 Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems
ANSI/ASTM D6443-2004 用波长散射X射线荧光光谱法测定未用过的润滑油和添加剂中的钙、氯、铜、镁、磷、硫和锌的试验方法 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-Ray Fluorescence Spectrometry (Mathematical)
ANSI/ASTM D6481-1999 能量散射X射线荧光谱仪测定润滑油中磷,硫,钙,锌含量的方法 Test Method for Determination of Phosphorus, Sulfur, Calcium and Zinc in Lubricating Oils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ANSI/ASTM D6553-2000 润滑油的冷冻液相容性试验方法 Test Method for Coolant Compatibility of Way Lubricants
ANSI/ASTM D6557-2004 汽车机油防锈特性评价的试验方法 Test Method for Evaluation of the Rust Preventive Characteristics of Automotive Engine Oils
ANSI/ASTM D6593a-2007 评价低温和低载条件下运行的、以汽油为燃料的火花点火式内燃机中抑制沉积物形成的汽车润滑油的试验方法 Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ANSI/ASTM D6594-2006 135℃时柴油机油腐蚀性评定的试验方法 Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC
ANSI/ASTM D6595-2005 用转盘电极原子发射光谱法测定已用润滑油或已用液压液中磨损金属和杂质的试验方法 Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ANSI/ASTM D6618-2005 四冲程超动力1m-PC单缸油测试引擎中引擎机油评价试验方法 Test Method for Evaluation of Engine Oils in the Diesel Four-Stroke Cycle Supercharged 1m-PC Single Cylinder Oil Test Engine
ANSI/ASTM D6681-2005 高速单缸柴油机履带车1P测试程序中发动机油的评估试验方法 Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - Caterpillar 1p Test Procedure
ANSI/ASTM D6709-2007 评价序列VIII火花点火式引擎(CLR油试验用发动机)中汽车润滑油用试验方法 Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ANSI/ASTM D6731-2001 关闭的透气性测定器中润滑剂或润滑剂组分的有氧生物降解性和水中生物降解性的测定方法 Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ANSI/ASTM D6750-2006 评估高速单缸柴油发动机用发动机油的试验方法.1K程序(0.4%硫燃料)和1N程序(0.04%硫燃料) Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1K Procedure (0.4% Fuel Sulfur) and 1N Procedure (0.04% Fuel Sulfur)
ANSI/ASTM D6794-2002 加入不同量水经长时间(6小时)加热后发动机油过滤性影响测定方法 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 H) Heating Time
ANSI/ASTM D6795-2002 加入水和干冰经短时间(30分钟)加热后机油过滤性影响测定方法 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 Min) Heating Time
ANSI/ASTM D6810-2007 用线性扫描伏安法测量无锌涡轮机油中受阻酚抗氧化剂含量的试验方法 Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ANSI/ASTM D6811-2002 湍流条件下测量航空器涡轮机燃料热稳定性的试验方法 Test Method of Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HIRETS Method)
ANSI/ASTM D6821-2002 测定恒定剪切应力粘度计中传动线路润滑剂的低温粘度的试验方法 Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ANSI/ASTM D6823-2002 掺有废润滑油的商用锅炉燃料标准规范 Standard Specification for Commercial Boiler Fuels with Used Lubricating Oils
ANSI/ASTM D6891a-2006 评估顺序IVA火花点火式发动机中汽车发动机油的试验方法 Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ANSI/ASTM D6894-2003 直接喷射式涡轮增压汽车柴油发动机的机油的抗混气性能的评价试验方法 Test Method for Evaluation of the Aeration Resistance of Engine Oils in a Direct-injected Turbocharged Automotive Diesel Engine
ANSI/ASTM D6922-2003 汽车发动机中均匀性和可混性测量的试验方法 Test Method for Measuring Homogeneity and Miscibility in Automotive Engine
ANSI/ASTM D6923-2005 高速、单缸柴油机中的引擎机油性能评估测试方法.Caterpillar 1R试验程序 Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine - Caterpillar 1R Test Procedure
ANSI/ASTM D6984a-2007 评价序列IIIF火花点火式发动机中汽车润滑油用试验方法 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ANSI/ASTM D6987a-2005 T-10废气再流通柴油机中的柴油机油性能评估测试方法 Test Method for Evaluation of Diesel Engine Oils in the T-10 Exhaust Gas Recirculation Diesel Engine
ANSI/ASTM D7038a-2007 评定汽车齿轮润滑剂耐湿腐蚀能力的试验方法 Test Method for the Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ANSI/ASTM D7040-2004 用感应耦合等离子体原子辐射光谱测定法测定Gf 4润滑油中低能磷的试验方法 Test Method for Determination of Low Levels of Phosphorus in Gf 4 Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
ANSI/ASTM D7097a-2006 用热氧化机油模拟试验测定适度高温活塞沉积物的试验方法.沉积物模拟实验 Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test - TEOST MHT
ANSI/ASTM D7098-2006 用薄膜氧吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的试验方法 Test Method for Oxidation Stability of Lubricants by Thin-film Oxygen Uptake (TFOUT) Catalyst B
ANSI/ASTM D7110-2005 低温下测定已用机油和含烟机油的粘性-温度关系的试验方法 Test Method for Determining the Viscosity-temperature Relationship of Used and Soot-containing Engine Oils at Low Temperatures
ANSI/ASTM D7155-2007 评估涡轮机润滑油混合物兼容性的实施规程 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ANSI/ASTM D7156a-2007 评定T-11废气再循环柴油机内柴油机润滑油的试验方法 Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ANSI/ASTM D7214a-2007 利用FT-IR峰面积积分测定已使用的润滑剂中氧化物的试验方法 Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ANSI/ASTM D7216-2005 汽车机油与传统密封弹性体兼容性测定的试验方法 Test Method for Determining Automotive Engine Oil Compatibility With Typical Seal Elastomers
ANSI/ASTM D7303-2007 用感应耦合等离子原子发射光谱法测定润滑脂中的金属含量用标准试验方法 Standard Test Method for the Determination of Metals in Lubricating Greases by Inductively Coupled Plasama Atomic Emission Spectrometry
ANSI/ASTM D7317a-2007 用纸过滤废润滑油中凝结戊烷不溶物的试验方法(LMOA法) Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ANSI/ASTM D7320b-2007 评定IIIG序列汽车火花点燃式发动机润滑油的试验方法 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ANSI/ASTM D7342-2007 水存在下润滑脂剪切稳定性的试验方法(水稳定性试验) Test Method for Shear Stability of Lubricating Grease in the Presence of Water (water Stability Test)
ANSI/ASTM D7373-2007 用生物动力学模型预测润滑剂的生物降解能力用试验方法 Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
ANSI/ASTM D874-2007 测定润滑油和添加剂中硫酸盐灰分的试验方法 Test Method for Sulfated Ash from Lubricating Oils and Additives
ANSI/ASTM D892-2006 润滑油起泡特性的试验方法 Test Method for Foaming Characteristics of Lubricating Oils
ANSI/ASTM D893a-2005 用过的润滑油中不溶物质的试验方法(05.01) Insolubles in Used Lubricating Oils, Method of Test for (05.01)
ANSI/ASTM D91-2002 润滑油沉淀值的试验方法 Test Method for Precipitation Number of Lubricating Oils
ANSI/ASTM D942-2002 用氧压容器法测定润滑脂的氧化稳定性用试验方法 Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
ANSI/ASTM D972-2002 润滑脂及油(05.01)蒸发损失试验方法 Test Method for Evaporation Loss of Lubricating Greases and Oils (05.01)
ANSI/ASTM E1497-2005 可混合水的金属加工流体使用安全规程 Practice for Safe Use of Water-Miscible Metal Removal Fluids
ANSI/ASTM E1687-2004 金工流体中直馏油致癌可能性测定的试验方法 Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
ANSI/ASTM E2523-2007 金属加工液和操作用术语 Terminology for Metalworking Fluids and Operations
ANSI/ASTM E2563-2007 用板计数法计算水性金属加工液中非结核分枝杆菌的试验方法 Test Method for Enumeration of Non-tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ANSI/SAE J300-1993 发动机润滑油的粘度分类 Engine Oil Viscosity Classification
ANSI/SAE J304-1993 发动机润滑油的试验 Engine Oil Tests
ANSI/SAE J306-1998 轴及手动变速器用汽车齿轮润滑剂粘度的分类 Automotive Gear Lubricant Viscosity Classification, Axle and Manual Transmission
ANSI/SAE J310-1993 汽车用润滑脂 Automotive Lubricating Greases
ANSI Z21.92-2001 手工操作电子点火燃气系统和部件 (同CSA 6.29) Manually Operated Electric Gas Ignition Systems and Components (same as CSA 6.29)
ANSI Z21.92-2001, and ANSI Z 21.92a-2005 手工操作的电气燃气点火系统和部件 Manually Operated Electric Gas Ignition Systems and Components (same as CSA 6.29, 6.29a)
ANSI Z21.92a-2005 手工操作的电燃气点火系统和部件 Manually Operated Elecric Gas Ignition Systems and Components (Same as CSA 6.29a)
ANSI/API 13M-2004 完井液体粘性测量的推荐规程 Recommended Practice for Measurement of viscous properties of completion fluids
ANSI/ASHRAE 99-2006 冷冻油描述 Refrigeration Oil Description
ANSI/ASTM D1093-2004 烃液及其蒸馏残液的酸度用试验方法 Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
ANSI/ASTM D1160-2006 减压下对石油产品蒸馏的试验方法(05.01) Test Method for Distillation of Petroleum Products at Reduced Pressures (05.01)
ANSI/ASTM D1266-2007 石油产品中硫的测试方法(灯法) Test Method for Sulfur in Petroleum Products (Lamp Method)
ANSI/ASTM D129-2000 石油产品含硫量试验方法(普通氧弹法)(05.01) Test Method for Sulfur in Petroleum Products (General Bomb Method) (05.01)
ANSI/ASTM D1319-2003 用荧光指示剂吸收法测定液化石油产品中烃类的试验方法 Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Test Method for (05.01)
ANSI/ASTM D1552-2007 石油产品中硫的试验方法(高温法) Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ANSI/ASTM D156a-2007 石油产品的赛波特比色试验方法(赛波特比色计法) Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ANSI/ASTM D1657-2002 用压力温差比重计测定轻质烃密度或相对密度的试验方法 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
ANSI/ASTM D189-2006 石油产品康氏残炭法的试验方法 Test Method for Conradson Carbon Residue of Petroleum Products
ANSI/ASTM D2008-1991 石油产品的紫外线吸收率和吸收能力的试验方法(05.01) Test Method for Ultraviolet ABSorbance and ABSorptivity of Petroleum Products
ANSI/ASTM D2269-1999 紫外线吸收法评定白色矿物油的方法(05.01) Evaluation of White Mineral Oils by Ultraviolet Absorption, Method for (05.01)
ANSI/ASTM D2421-2002 C5和轻质烃类气体体积、液体体积或重量基准的分析换算 Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ANSI/ASTM D2425-2004 质谱法测定气体的化学成分的试验方法 Chemical Composition of Gases by Mass Spectrometry, Test Method for (05.01)
ANSI/ASTM D2500-2005 石油产品始凝点的试验方法 Test Method for Cloud Point of Petroleum Products
ANSI/ASTM D2501-1991 计算石油的粘度-比重常数的试验方法(05.01) Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils (05.01)
ANSI/ASTM D2502-2004 从粘度测量估算石油分子量的方法 Method for Estimation of Molecular Weight of Petroleum Oils from Viscosity Measurements (05.01)
ANSI/ASTM D2503-1992 蒸气压力的热电测量法测定烃类相对分子量的试验方法 Test Method for Relative Molecular Mass Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ANSI/ASTM D2504-1988 用气相色谱法测定C3和轻质烃类产品中的气体的非浓缩性试验(05.01) Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography, Test for Noncondensable (05.01)
ANSI/ASTM D2549-2002 用洗脱色谱法测定高沸点油典型芳香族和非芳香族馏分的分离方法 Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
ANSI/ASTM D2597-1994 用气相色谱法分析天然气-液混合物的试验方法(05.02) Analysis of Natural Gas-Liquid Mixtures by Gas Chromatography, Method for (05.02)
ANSI/ASTM D2622a-2007 试验方法中硫含量的石油产品由波长色散X射线荧光光谱法 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ANSI/ASTM D2786-1996 高电离电压质谱法分析气-油饱和馏分烃类型的试验方法 Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturate Fractions by High Ionizing Voltage Mass Spectrometry (05.02)
ANSI/ASTM D2887a-2006 气相色谱法测定石油馏分沸腾范围分布的试验方法 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ANSI/ASTM D2890-1992 石油馏出燃料的液体热容量的计算方法(05.02) Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels (05.02)
ANSI/ASTM D2896-2007 用电位高氯酸滴定法测定石油产品碱值的试验方法 Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ANSI/ASTM D3120-2006 用氧化微库仑分析法测定轻质液态石油烃类中硫痕量的试验方法 Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ANSI/ASTM D323-2006 石油产品的蒸气压力的试验方法(Reid法) Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ANSI/ASTM D3238-1995 用n-d-M 法对石油进行碳分布和结构组分析的试验方法(05.02) Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method, Method of Test for (05.02)
ANSI/ASTM D3239-1996 高电离电压质谱法对汽油芳香馏分进行芳香类型分析的试验方法 Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry (05.02)
ANSI/ASTM D3339-2007 用半微量颜色指示剂滴定法测定石油产品酸值的试验方法 Test Method for Acid Number of Petroleum Products by Semi-micro Color Indicator Titration
ANSI/ASTM D341-2004 粘度.液态石油产品的温度图 Viscosity - Temperature Charts for Liquid Petroleum Products (05.01)
ANSI/ASTM D3427-2007 石油气体释放特性的试验方法 Test Method for Air Release Properties of Petroleum Oils
ANSI/ASTM D3712-2005 用液相色谱法分析油溶性石油硫酸盐的试验方法 Test Method of Analysis of Oil-soluble Petroleum Sulfonates by Liquid Chromatography
ANSI/ASTM D4045-2004 利用加氢分解作用和速率测定比色法测试石油产品中硫的含量 Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry (05.02)
ANSI/ASTM D4294-2007 试验方法中硫含量的石油和石油产品由能量色散X射线荧光光谱法 Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry
ANSI/ASTM D4530-2007 测定碳残留物的试验方法(微量法) Test Method for Determination of Carbon Residue (Micro Method)
ANSI/ASTM D4625a-2004 43C(110F)时馏出燃料储存稳定性的试验方法 Test Method for Distillate Fuel Storage Stability at 43C (110F)
ANSI/ASTM D4629-2002 用注射/插入氧化燃烧和化学发光检测法测定液态石油烃中痕量氮的试验方法 Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/inlet Oxidative Combustion and Chemiluminescence Detection
ANSI/ASTM D482-2007 石油产品中灰分的试验方法 Test Method for Ash from Petroleum Products
ANSI/ASTM D483-2004 石油制植物喷洒油不磺化残渣的试验方法 Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
ANSI/ASTM D5190-2007 石油产品蒸汽压力的试验方法(自动方法) Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ANSI/ASTM D5191-2007 石油产品蒸气压力的试验方法(小型法) Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ANSI/ASTM D524-2004 石油产品的兰氏残炭试验方法 Test Method for Ramsbottom Carbon Residue of Petroleum Products
ANSI/ASTM D5292-1999 高分辨率核磁共振光谱法测定芳烃油中碳和氢含量的方法(05.03) Aromatic Hydrogen and Aromatic Carbon Contents of Hydrocarbon Oils by High-Resolution Nuclear Magnetic Resonance Spectroscopy, Test Method for (05.03)
ANSI/ASTM D5304-2006 剩余氧压法评定中间馏份燃料储存稳定性的试验方法 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ANSI/ASTM D5307-1997 气相色谱法测定原油沸腾温度范围分布的试验方法 Test Method for the Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
ANSI/ASTM D5384-1995 使用过石油产品中氯的试验方法(油田测试盒方法) Test Method for Chlorine in Used Petroleum Products (Field Test Kit Method) (05.03)
ANSI/ASTM D5443-2004 用多维气相色谱法在200℃内分析石油馏分中链烷烃、环烷烃和芳香烃的试验方法 Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas
ANSI/ASTM D5482-2007 石油产品蒸气压力的试验方法(大气的小型法) Test Method for Vapor Pressure of Petroleum Products (Mini-Method - Atmospheric)
ANSI/ASTM D565-1999 白矿物油(液体石蜡)中易碳化物质的试验方法 Carbonizable Substances in White Mineral Oil (Liquid Petrolatum), Method of Test for (05.01)
ANSI/ASTM D5762-2005 用船进气化学发光法测定石油和石油产品中氮的试验方法 Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-inlet Chemiluminescence
ANSI/ASTM D5772-2005 石油产品始凝点的试验方法.线性降温率法 Test Method for Cloud Point of Petroleum Products - Linear Cooling Rate Method
ANSI/ASTM D5949-2001 石油产品倾点测试方法(自动压力脉冲法) Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
ANSI/ASTM D5950-2002 石油产品倾点测试方法(自动倾斜法) Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ANSI/ASTM D5985-2002 石油产品倾点测试方法(旋转法) Test Method for Pour Point of Petroleum Products (Rotational Method)
ANSI/ASTM D6045-2004 用自动三色法测定石油产品颜色的试验方法 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ANSI/ASTM D6200-2001 冷却曲线分析法测定淬火油冷却特性的方法 Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ANSI/ASTM D6352a-2004 用气相色谱法在174 到 700 C沸腾范围间测定石油馏出物沸点范围分布的试验方法 Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range of 174 to 700 C by Gas Chromatography
ANSI/ASTM D6378-2007 测定石油产品、碳氢化合物和氧化烃类混合物的蒸气压力(Vpx)的试验方法(三胀法) Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
ANSI/ASTM D6450-2005 用连续闭杯(CCCFP)试验器测定闪点的试验方法 Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ANSI/ASTM D6560-2000 原油和原油产品沥青物质测定方法 Test Method for Determination of Asphaltenes (Heptane Insolubles), in Crude Petroleum and Petroleum Products
ANSI/ASTM D664-2007 电位滴定法测定石油产品酸值的试验方法 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ANSI/ASTM D665-2006 在有水存在时油封矿物油防锈特性的试验方法 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ANSI/ASTM D6667-2004 紫外线荧光测量法测定气态烃和液化石油气中挥发性硫总含量的试验方法 Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ANSI/ASTM D6708-2007 测量某种材料相同性质的两种试验方法间预期一致性的统计学评估和改进措施的实施规程 Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods That Purport to Measure the Same Property of a Material
ANSI/ASTM D6749-2002 石油产品倾点测试方法(自动空气压力法) Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ANSI/ASTM D6791-2006 煅烧石油焦炭晶粒稳定性测定方法 Test Method for the Determination of Grain Stability of Calcined Petroleum Coke
ANSI/ASTM D6892-2003 石油制品倾点的试验方法(自动倾斜法) Test Method for Pour Point of Petroleum Products (robotic Tilt Method)
ANSI/ASTM D6895-2006 重型柴油机放出油在100℃时旋转粘度的试验方法 Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 C
ANSI/ASTM D7094-2004 用改良的连续闭杯闪点测试计测定闪点的试验方法 Test Method for Flash Point by Modified Continuously Closed Cup Flash Point Tester
ANSI/ASTM D7171-2005 用低分辨率核磁共振光谱法测定石油产品中间馏份中氢含量的标准试验方法 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ANSI/ASTM D7213-2006 利用气相色谱法在100至615之间进行石油蒸馏分布状态沸腾范围测定的试验方法 Test Method for the Boiling Range Distribution of Petroleum Distillates in The Boiling range form 100 to 615 by Gas Chromatography
ANSI/ASTM D7346-2007 石油产品的非流动点用标准试验方法 Standard Test Method for No Flow Point of Petroleum Products
ANSI/ASTM D7347-2007 超临界流体色谱法测定变性酒精中链烯含量的标准试验方法 Standard Test Method for the Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
ANSI/ASTM D7397-2007 测定石油产品始凝点的试验方法(小型光学法) Test Method for Cloud Point of Petroleum Products (miniaturized Optical Method)
ANSI/ASTM D808-2005 新的及用过的石油产品中氟含量侧试方法(氧弹法) Test Method for Chloride in New and Used Petroleum Products (Bomb Method)
ANSI/ASTM D86a-2007 大气压下石油产品蒸馏的试验方法 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ANSI/ASTM D94-2007 石油产品皂化值的试验方法 Test Methods for Saponification Number of Petroleum Products
ANSI/ASTM D943-2004 防腐蚀矿物油氧化特性的试验方法 Test Method for Oxidation Characteristics of Inhibited Mineral Oils
ANSI/ASTM D97-2007 石油产品倾点的试验方法 Test Method for Pour Point of Petroleum Products
ANSI/ASTM D2780-2007 液体中固定气体溶解性的试验方法 Test Method for Solubility of Fixed Gases in Liquids
ANSI/ASTM D3246-2005 用氧化微库仑法测定石油气中硫含量的标准试验方法 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ANSI/ASTM D3429-1987 低沸点液体中固定气体可溶性的试验方法 Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ANSI/GPA 2172-2007 成分分析中加热总值、比重和天然气混合物可压缩性的计算 Calculation of Gross Heating Value, Specific Gravity, and Compressibility of Natural Gas Mixtures from Compositional Analysis
ANSI/API MPMS5.6-2002 用科里奥利仪测量液态烃类物质 Measurement of Liquid Hydrocarbons by Coriolis Meters
ANSI/API MPMSCH. 5.6-2002 用科里奥利仪测量液烃 Measurement of Liquid Hydrocarbons by Coriolis Meters
ANSI/ASTM D1018-2000 石油馏分物氢含量测试方法(05.01) Test Method for Hydrogen in Petroleum Fractions (05.01)
ANSI/ASTM D2892-2005 原油蒸馏测试方法(15-理论塔板柱) Test Method for Distillation of Crude Petroleum (15-theoretical Plate Column)
ANSI/ASTM D3230-2006 电势滴定法测定原油中盐的试验方法 Test Method for Salts in Crude Oil Electrometric Method
ANSI/ASTM D3827-1997 石油和其他有机液体中气体溶解度的评估用试验方法 Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
ANSI/ASTM D4006-2007 通过蒸馏测定原油中含水的试验方法 Test Method for Water in Crude Oil by Distillation
ANSI/ASTM D4007-2007 测试方法为水和沉积物在原油离心机方法实验室程序 Test Method for Water and Sediment in Crude Oil by the Centrifuge Method Laboratory Procedure
ANSI/ASTM D4310b-2006 预测抑制矿物油的淤泥和腐蚀趋势用试验方法 Test Methods for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
ANSI/ASTM D4377-2000 卡耳费歇尔电势滴定法测定原油中含水量的试验方法 Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ANSI/ASTM D4807-2005 用薄膜过滤法测定原油中沉积物的试验方法(05.03) Sediment in Crude Oil by Membrane Filtration, Test Method (05.03)
ANSI/ASTM D4928-1996 库仑电量卡耳费瑟法测定原油含水量的方法 Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ANSI/ASTM D4929-2007 测定原油中有机氯化物含量的试验方法 Test Methods for Determination of Organic Chloride Content in Crude Oil
ANSI/ASTM D5002-1999 数字密度分析仪测量原油相对密度和密度的方法(08.03) Test Method for Density and Relative Density of Crude Oils by Digital Analyzer (05.03)
ANSI/ASTM D5853-2006 原油倾点测试方法 Test Method for Pour Point of Crude Oils
ANSI/ASTM D5863-2000 原子吸收光谱测量法测定原油和油渣中镍、钒、铁和钠的方法 Test Method for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ANSI/ASTM D6377-2004 原油蒸气压力测定的试验方法:Vpcrx(膨胀法) Test Method for Vapor Pressure of Crude Oil: Vpcrx (Expansion Method)
ANSI/ASTM D6470-1999 原油中盐含量测定方法（电势法） Method for Salt in Crude Oils (Potentiometric Method)
ANSI/ASTM D7059-2004 用多维气相色谱法测定原油中甲醇的试验方法 Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
ANSI/ASTM D96-1988 原油中水和沉积物的(05.01)试验方法 Water and Sediment in Crude Oils, Method of Test for (05.01)

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点