畅销书下载

ANSI 美国国家标准协会标准文献中英文对照目录 共27页

所有标准的版权均归 ANSI 以及其他相关组织所有。提供的标准主题包括：建筑、机械、电子电气、化学、核、信息系统、摄影、综合、通用、以及金融服务

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

ANSI/ASTM E861-1994 太阳能集热器绝热材料评估惯例 Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
ANSI/ASTM E903-1996 利用综合球进行材料的太阳能吸收、反射和传输的试验方法 Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials using Integrating Spheres
ANSI/ASTM E927-1991 地面光伏测试用太阳模拟器规范 Specification for Solar Simulation for Terrestrial Photovoltaic Testing
ANSI/ASTM E948-1995 利用比对电池进行非浓缩地面光伏电池的电特性的方法 Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Cells Using Reference Cells
ANSI/ASTM E973M-1996 光伏器件和光伏比对电池光谱失配参数测定方法 Test Method for Determination of the Spectral Mismatch Parameter between a Photovoltaic Device and a Photovoltaic Reference Cell (Metric)
ANSI/IEEE 1513-2001 集线器光电接收机组和模块合格鉴定的推荐实施规程 Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Receiver Sections and Modules
ANSI/IEEE 1526-2003 独立的光伏系统性能试验的推荐规程 Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
ANSI/UL 1703-2004 片状光电模块和配电盘的安全标准 Standard for Safety for Flat-Plate Photovoltaic Modules and Panels
ANSI/ASME PTC18-2002 水轮机和泵.涡轮机 Hydraulic Turbines and Pump - Turbines
ANSI/ASME PTC29-2005 水力涡轮发电机组的速度调节系统 Speed Governing Systems for Hydraulic Turbine Generators Units
ANSI/IEEE 1010-2006 水力发电站的控制指南 Guide for Control of Hydroelectric Power Plants
ANSI/IEEE 1147-2005 水电站的重建指南 Guide for the Rehabilitation of Hydroelectric Power Plants
ANSI/IEEE 1207-2004 水力发电装置用涡轮控制系统的应用指南 Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
ANSI/IEEE 125-2007 调节驱动发电机的水轮机速度用设备规范编写的推荐实施规程 Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
ANSI ATIS0600315-2007 用于电信环境的直流电功率设备的电压级 Voltage Levels for DC-Powered Equipment Used in the Telecommunications Environment
ANSI/ASME PTC19.11-2008 动力循环中水和蒸汽的取样、调节和分析 Steam and Water Sampling, Conditioning and Analysis in the Power Cycle
ANSI/ASME PTC47-2006 整体煤气化联合循环电场 Integrated Gasification Combined Cycle Plants
ANSI/IEEE 1050-2004 发电站接地用装置和控制设备指南 Guide for Instrumentation and Control Equipment Grounding in Generating Stations
ANSI/IEEE 1127-1998 符合环境要求的安全、可靠变电站的设计、建造和运行指南 Guide for the Design, Construction, and Operation of Safe and Reliable Substations for Environmental Acceptance
ANSI/IEEE 1402-2000 变电所的物理和电子安全性指南 Guide for Electric Power Substations Physical and Electronic Security
ANSI/IEEE 1547.3-2007 分配资源与电力系统互连的监控、信息交流和控制导则 Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
ANSI/IEEE 367-1996 电力故障导致的发电站地电位升高和感应电压测定的推荐操作规程 Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
ANSI/IEEE 502-1985 矿物燃料装置连接的蒸汽站防护、联锁和控制指南 Fossil-Fueled Unit-Connected Steam Stations, Guide for Protection, Interlocking, and Control of
ANSI/IEEE 666-2006 发电站用供电业务系统的设计指南 Electric Power Service Systems for Generating Stations, Design Guide for
ANSI/IEEE 958-2003 发电站中2400至13800V辅助系统上可调速交流传动装置的应用指南 Guide for Application of AC Adjustable-Speed Drives on 2,400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations
ANSI/IEEE C37.122.1-2002 气体绝缘变电站导则 Guide for Gas-Insulated Substations
ANSI/IEEE C37.122-2002 气体绝缘变电站标准 Standard for Gas-Insulated Substations
ANSI/IEEE C62.23-2001 发电厂电流波动保护装置的应用指南 Application Guide for Surge Protection of Electric Generating Plants
ANSI/ISA 77.41.01-2005 矿物燃料发电厂锅炉燃烧控制装置 Fossil Fuel Power Plant Boiler Combustion Controls
ANSI/ISA 77.42.01-1999 火电厂给水控制系统.滚筒式 Fossil Fuel Plant Feedwater Control System - Drum Type
ANSI/ARI 1160-2004 热泵集中加热器的性能评定 Performance Rating of Heat Pump Pool Heaters
ANSI/ARI 330-1993 地热源闭合循环热泵 Ground Source Closed-Loop Heat Pumps
ANSI/ARI 870-2001 直接土工交换热泵 Direct GeoExchange Heat Pumps
ANSI/ARI/ASHRAE/ISO 13256-1-1998 水源热力泵.性能试验和额定值测量.第1部分:水-空气和盐水-空气热力泵 Water-Source Heat Pumps - Testing and Rating for Performance: Part 1 - Water-to-Air and Brine-to-Air Heat Pumps
ANSI/ARI/ASHRAE/ISO 13256-2-1998 水源热力泵.性能试验和额定值测量.第2部分:水-水和盐水-水热力泵 Water-Source Heat Pumps - Testing and Rating for Performance: Part 2 - Water-to-Water and Brine-to-Water Heat Pumps
ANSI/AIAA G-095-2004 氢和氢系统的安全指南 Guide for Safety of Hydrogen and Hydrogen Systems
ANSI/ASME PTC50-2002 燃料电池动力系统性能 Fuel Cell Power Systems Performance
ANSI/CSA AmericaFC 1-2004 燃料电池动力装置 Fuel Cell Power Plants (same as CGA 12.10)
ANSI/CSA FC3-2004 便携式燃料电池动力系统 Portable Fuel Cell Power Systems
ANSI B133.12-1981 燃气轮机保养和安全的采购标准 Gas Turbines - Procurement Standard - Maintenance and Safety
ANSI B133.8-1977 燃气轮机装置的声辐射 Installation Sound Emission, Gas Turbine
ANSI/API 612(ISO 10437-2003)-2005 石油、石化和天然气工业.蒸汽涡轮.专用设施 Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications
ANSI/API 612-2005 石油、石化和天然气行业-蒸汽涡轮－专用 Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications
ANSI/ASME B133.8M-1977 燃气轮机装置噪音释放 Installation Sound Emission, Gas Turbine
ANSI/ASME PTC12.2-1998 性能测试规程.蒸汽冷凝装置 Performance Test Code on Steam Surface Condensers
ANSI/ASME PTC22-2005 燃气轮机的性能试验规程 Performance Test Code on Gas Turbines
ANSI/ASME PTC39.1-2005 凝水排除器 Steam Traps
ANSI/ASME PTC4.2-1969 性能试验规则.煤炭粉碎机 Performance Test Code - Coal Pulverizers
ANSI/ASME PTC4.4-2008 燃气轮机余热回收蒸汽发生器 Gas Turbine Heat Recovery Steam Generators
ANSI/ASME PTC4-1998 性能试验规程.蒸汽发生装置 Performance Test Code - Steam Generating Units (includes ASME 1968 and 1969 addenda)
ANSI/ASME PTC6 App-1982 汽轮机的性能试验规程(ANSI/ASME PTC 6的补充) Performance Test Code - Steam Turbines (appendix to ANSI/ASME PTC 6)
ANSI/ASME PTC6.2-2004 联合循环蒸汽涡轮机 Steam Turbines in Combined Cycles
ANSI/ASME PTC6-2004 汽轮机的性能试验标准6 Performance Test Code 6 on Steam Turbines
ANSI/ASME PTC6A-2000 性能试验代码.蒸气轮机.附件 Performance Test Code - Steam Turbines, Appendix
ANSI/ASME PTC6S-1988 性能测试规程.汽轮机例行试验的简化程序 Performance Test Code - Steam Turbines, Simplified Procedures for Routine Tests
ANSI/IEEE 810-1994 水轮机和发电机整体锻轴配合和轴公差标准 Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Tolerances
ANSI/NFPA 8506-1995 热回收蒸汽发生器 Heat Recovery Steam Generators
ANSI/ASME PTC17-1973 性能试验规程.往复式内燃机 Performance Test Code - Reciprocating Internal-Combustion Engines
ANSI/ASTM D6838-2004 Cummins M11浓积炭试验的试验方法 Test Method for Cummins M11 High Shoot Test
ANSI/ASTM D6975-2004 康明斯M11排气再循环试验的试验方法 Test Method for Cummins M11 EGR Test
ANSI/UL 1247-2007 离心消防泵驱动用柴油发动机的安全标准 Standard for Safety for Diesel Engines for Driving Centrifugal Fire Pumps
ANSI/ASTM B70-1990 电加热金属材料电阻随温度变化的测试方法 Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
ANSI/UL 1030-2004 带护套的加热元件 Sheathed Heating Elements
ANSI/AWS C4.4/C 4.4M-2007 用含氧可燃气体喷灯加热成形和矫直的推荐实施规程 Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches
ANSI/IPC 9850-2002 表面安装设备特性描述 Surface Mount Equipment Characterization
ANSI/NIMS 100-2001 职责和标准:机器维护和修理以及服务水平II级和III级 Duties and Standards: Machine Maintenance, Repair and Service Level II & Level III
ANSI/ASTM F2647-2007 中央真空系统(CVS)安装的认可方法用指南 Guidelines for Approved Methods of Installing a Cvs (Central Vacuun System)
ANSI B93.32M-1973 流体动力径向压缩型活塞环的环槽尺寸 Groove dimensions for fluid power radial compression type piston rings
ANSI B93.51M-1980 气压传动快速耦合试验条件和程序 Pneumatic Fluid Power Quick Action Couplings, Test Conditions and Procedures for
ANSI/ARI 510-1993 氨气压缩机设备 Ammonia Compressor Units
ANSI/ARI 520-2004 容积式冷凝机组性能评定 Performance Rating of Positive Displacement Condensing Units
ANSI/ARI 530-2005 冷媒压缩机振动和发声的额定值 Rating of Sound and Vibration for Refrigerant Compressors
ANSI/CAGI ADF300-1998 干塔（非回热式）脱水压缩空气干燥器.额定功率和试验方法 Single Tower (Non-Regenerative) Desiccant Compressed Air Dryers - Methods for Testing and Rating
ANSI/CAGI ADF700-1998 膜式压缩空气干燥器.额定功率和试验方法 Membrane Compressed Air Dryers - Methods for Testing and Rating
ANSI/UL 60335-2-34-2005 家用和类似用途电器的安全标准.第2部分:电动压缩机的特殊要求 Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors
ANSI/AMCA 210/ASHRAE51-2007 证明为空气动力学性能评估用测试风扇的实验室方法 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/AMCA 220-2005 空气动力学性能指标用风帘装置测试的实验室方法 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/AMCA 230-2007 测定空气循环电扇额定值的实验室方法 Laboratory Method of Testing Air Circulator Fans for Rating
ANSI/AMCA 240-2006 正压通风机评定的实验室测试方法 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 250-2005 测试喷气式烟道风扇性能的实验室方法 Laboratory Methods of Testing Jet Tunnel Fans for Performance
ANSI/AMCA 610-2006 空气流量测量站评定的试验方法 Methods of Testing Airflow Measurement Stations for Rating
ANSI/AMCA 99-2404-2003 离心式风扇用传动装置 Drive Arrangements for Centrifugal Fans
ANSI/AMCA 99-2405-2003 离心式风扇进气箱位置 Inlet Box Positions for Centrifugal Fans
ANSI/AMCA 99-2406-2003 离心式风扇的转向和排量标识 Designation for Rotation and Discharge of Centrifugal Fans
ANSI/AMCA 99-2407-2003 皮带或链驱动离心式电风扇的马达位置 Motor Positions for Belt or Chain Drive Cetrifugal Fans
ANSI/AMCA 99-2410-2003 管状离心式通风机用传动设备 Drive Arrangements for Tubular Centrifugal Fans
ANSI/AMCA 99-2412-2003 离心式风扇用叶轮直径和插座区 Impeller Diameters and Outlet Areas for Centrifugal Fans
ANSI/AMCA 99-2413-2003 工业离心式风扇的叶轮直径和出口面积 Impeller Diameters and Outlet Areas for Industrial Centrifugal Fans
ANSI/AMCA 99-2414-2003 管状离心式通风机用叶轮直径和排气口面积 Impeller Diameters and Outlet Areas for Tubular Centrifugal Fans
ANSI/AMCA 99-3001-2003 轴流式通风机的尺寸 Dimensions for Axial Fans
ANSI/AMCA 99-3404-2003 装有或未装出风扩散道和进气箱的轴流式通风机的传动设备 Drive Arrangements for Axial Fans With or Without Evase and Inlet Box
ANSI/ASME PTC11-1984 风扇 Fans
ANSI/ASME PTC12.3-1997 除氧器 Deaerators
ANSI/ASTM D4167-1997 纤维增强塑料风扇和鼓风机的规范 Specification for Fiber-Reinforced Plastic Fans and Blowers
ANSI/CAGI ADF500-1998 石油蒸气吸收过滤器吸收容量的测定 Measurement of Absorbtion Capacity of Oil Vapor Removal Absorbent Filters
ANSI/UL 1917-2002 固态风机速度控制器的安全标准 Standard for Safety for Solid-State Fan Speed Controls
ANSI/UL 441-2006 透气管道安全标准 Standard for Safety for Gas Vents
ANSI/UL 507-2007 电扇 Electric Fans
ANSI/UL 586-2004 高效颗粒空气过滤器设备 High-Efficiency Particulate Air Filter Units
ANSI/UL 641-2005 L型低温通风系统安全标准 Standard for Safety for Type L Low-Temperature Venting Systems
ANSI/UL 705-2006 电力通风机 Power Ventilators
ANSI/API 685-1999 用于石油、重型化工和燃气行业的非密封离心泵 Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services
ANSI/ASME B73.1-2001 化工用卧式端吸离心泵规范 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
ANSI/ASME B73.2-2003 化工用立式直列式离心泵的标准规范 Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for
ANSI/ASME B73.2M-2003 化工用立式直列式离心泵规范 Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for
ANSI/ASME B73.3-2003 非密封卧式端部吸水管规范 Specification for Sealless Horizontal End Suction
ANSI/ASME B73.3M-2003 非密封卧式端部吸水管规范 Specification for Sealless Horizontal End Suction
ANSI/ASTM D2809-1999 发动机冷却剂对铝泵的气蚀和侵蚀特性测试方法 Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
ANSI/ASTM F998-2004 船用离心泵规范 Specification for Centrifugal Pump, Shipboard Use
ANSI/AWWA E103-2008 横向和纵向线轴泵 Horizontal and Vertical Line Shaft Pumps
ANSI/FCI 73-1-1998 Y型滤器压力额定值标准 Pressure Rating Standard for "Y" Type Strainers
ANSI/FCI 78-1-1998 不包括Y型在内的管道滤器压力额定值标准 Pressure Rating Standard for Pipeline Strainers Other than "Y" Type
ANSI/HI 1.3-2007 离心泵.水平基板设计 Centrifugal Pumps - Horizontal Baseplate Design
ANSI/HI 1.6-2000 离心泵测试 Centrifugal Pump Test
ANSI/HI 10.1-10.5-2004 风动泵的名称、定义、应用和操作 Air-Operated Pumps for Nomenclature, Definitions, Application, and Operation
ANSI/HI 10.6-2004 风动泵的试验 Air-Operated Pump Tests
ANSI/HI 12.1-12.6-2005 离心式淤浆泵的名词定义、应用和操作 Rotodynamic Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and Operation-2005
ANSI/HI 2.6-2000 立式泵测试 Vertical Pump Test
ANSI/HI 3.6-2000 旋转式泵测试 Rotary Pump Test
ANSI/HI 6.6-2000 循环泵测试 Reciprocating Pump Test
ANSI/HI 9.6.2-2001 离心泵和立式泵.最大喷嘴负荷 Centrifugal and Vertical Pumps for Allowable Nozzle Loads
ANSI/HI 9.6.4-2000 离心泵和立式泵.振动测量和容许值 Centrifugal and Vertical Pumps for Vibration Measurement and Allowable Values
ANSI/HI 9.6.5-2000 离心泵和立式泵.状况监测 Centrifugal and Vertical Pumps for Condition Monitoring
ANSI/HI 9.6.7-2004 液体粘度对旋转动态(离心和立式)泵性能的影响 Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance
ANSI/HI 9.8-1998 泵入口设计 Pump Intake Design
ANSI/UL 1081-2008 游泳池用泵、过滤器和氯化器 Swimming Pool Pumps, Filters, and Chlorinators
ANSI/UL 51-1999 用于液化石油气和无水氨的动力操作泵 Power-Operated Pumps for Anhydrous Ammonia and LP-Gas
ANSI/UL 778-2006 电动水泵 Motor Operated Water Pumps
ANSI/UL 79-2005 石油分配系统用电动泵的安全标准 Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Systems
ANSI/ASTM D2981-1994 振动中粘性固态薄膜润滑剂的耐磨寿命的测量方法(05.02) Measuring the Wear Life of Bonded Solid Film Lubricants in Oscillating Motion, Test Method for (05.02)
ANSI/ASTM D4241-1999 燃气轮机润滑油系统的设计(05.02) Gas Turbine Generator Lubricating Oil System, Design of (05.02)
ANSI/ASTM D4248-1999 蒸汽涡轮发电机油路系统设计(05.02) Design of Steam Turbine Generator Oil Systems (05.02)
ANSI/ASTM F1567-1997 机加或铸造的自清洁燃料油和润滑油过滤器规范 Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ANSI/ASTM F2649-2007 波纹状高密度聚乙烯(hdpe)油脂拦截槽用规范 Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ANSI/AGMA 1003-2007 细距正齿轮和斜齿轮传动装置的齿轮齿比例 Tooth Proportions for Fine-Pitch Spur and Helical Gearing
ANSI/AGMA 1006-A-1997 塑料齿轮的齿轮齿比例 Tooth Proportions for Plastic Gears
ANSI/AGMA 1102-2003 齿轮滚刀的公差规范 Tolerance Specification of Gear Hobs
ANSI/AGMA 1103-2007 细距正齿轮和斜齿轮传动装置的齿轮齿比例(米制版) Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition)
ANSI/AGMA 1106-A-1997 塑料齿轮的齿轮齿比例 Tooth Proportions for Plastic Gears (Metric Version of ANSI/AGMA 1006-A97)
ANSI/AGMA 2001-D-2004 渐开线正齿轮齿和斜齿轮螺旋齿的基本额定因子和计算方法 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
ANSI/AGMA 2002-B-1988 齿厚度规范和测量 Tooth Thickness Specification and Measurement
ANSI/AGMA 2003-B-1997 直齿伞齿轮齿,弧齿伞齿轮齿,螺旋伞齿轮齿的耐点蚀性和弯曲强度的评定 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
ANSI/AGMA 2004-2008 齿轮材料和热处理手册 Gear Materials and Heat Treatment Manual
ANSI/AGMA 2005-D-2003 伞形齿轮的设计手册 Design Manual for Bevel Gears
ANSI/AGMA 2007-C-2000 齿轮.磨削后表面回火的浸蚀检验 Gears - Surface Temper Etch Inspection After Grinding
ANSI/AGMA 2008-C-2001 锥齿轮的装配 Assembling Bevel Gears
ANSI/AGMA 2009-B-2001 锥形齿轮分类、公差和测量方法 Bevel Gear Classification, Tolerances and Measuring Methods
ANSI/AGMA 2011-A-1998 圆柱形涡轮传动装置公差和检验方法 Cylindrical Wormgearing Tolerance and Inspection Methods
ANSI/AGMA 2015-1-A-2002 精度分类系统.圆柱形齿轮的切向测量法 Accuracy Classification System - Tangential Measurements for Cylindrical Gears
ANSI/AGMA 2015-2-2006 圆柱形齿轮的精度分类系统.半径测量 Accuracy Classification System for Cylindrical Gears - Radial Measurements
ANSI/AGMA 2101-D-2004 渐开线正齿轮齿和斜齿轮螺旋齿的基本额定因数和计算方法 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
ANSI/AGMA 2111-A-1998 圆柱形涡轮传动装置公差和检验方法(米制) Cylindrical Wormgearing Tolerance and Inspection Methods (Metric)
ANSI/AGMA 2116-A-2005 利用齿轮的径向组合测量法评估双面啮合误差测量仪 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
ANSI/AGMA 6000-B-1996 齿轮装置线性振动的测量规范 Specification for Measurement of Linear Vibration on Gear Units
ANSI/AGMA 6001-D-1997 封闭齿轮传动装置的选择和设计 Design and Selection of Components for Enclosed Gear Drives
ANSI/AGMA 6002-B-1993 车辆正齿轮和斜齿轮的设计指南 Design Guide for Vehicle Spur and Helical Gears
ANSI/AGMA 6006-2004 风力涡轮机齿轮箱的设计和规范 Design and Specification of Gearboxes for Wind Turbines
ANSI/AGMA 6008-A-1998 粉末冶金齿轮规范 Specifications for Powder Metallurgy Gears
ANSI/AGMA 6011-2003 高速螺旋齿轮元件规范 Specification for High-Speed Helical Gear Units
ANSI/AGMA 6014-A-2006 柱形壳和耳轴支承设备的齿轮额定功率 Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment
ANSI/AGMA 6022-C-1993 圆柱形涡轮传动装置的设计手册 Design Manual for Cylindrical Wormgearing
ANSI/AGMA 6025-A-1998 封闭螺旋、人字和螺旋伞齿轮传动装置的声音 Sound for Enclosed Helical, Herringbone, and Spiral Bevel Gear Drives
ANSI/AGMA 6025-D-1998 封闭斜齿轮,人字形齿轮和螺旋形伞齿轮传动装置的声量 Sound for Enclosed Helical, Herringbone, and Spiral Bevel Gear Drives
ANSI/AGMA 6032-A-1994 船用齿轮装置标准:等级 Standard for Marine Gear Units: Rating
ANSI/AGMA 6033-B-1998 海舶推进齿轮装置,第1部分:材料 Marine Propulsion Gear Units, Part 1 - Materials
ANSI/AGMA 6034-B-1992 封闭的圆柱形涡轮减速器和齿轮电动机的操作规程 Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
ANSI/AGMA 6035-2002 工业球面蜗杆传动机构的设计、额定功率和用途 Design, Rating and Application of Industrial Globoidal Wormgearing
ANSI/AGMA 6114-A-2006 圆桶破碎机、干燥炉、冷却器和干燥器的传动额定功率 Gear Power Rating for Cylindrical Grinding Mills, Kilns, Coolers, and Dryers
ANSI/AGMA 6123-B-2006 封闭式周转轮传动设计手册 Design Manual for Enclosed Epicyclic Gear Drives
ANSI/AGMA 6133-B-1998 船舶推动传动装置用材料 Materials for Marine Propulsion Gearing
ANSI/AGMA 6135-2002 工业球面蜗杆传动机构的设计、额定功率和用途(米制版本) Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition)
ANSI/AGMA 9005-E-2002 工业齿轮润滑 Industrial Gear Lubrication
ANSI/AGMA ISO18653-2006 齿轮.评估测量单个齿轮仪器 Gears - Evaluation of Instruments for the Measurement of Individual Gears
ANSI/ASME B29.400-2001 哄鐈ヾ阁乄哶侌犛轇齮."H"型Mill链、附件和供片轮齿 Combination Chains, Attachments, and Sprocket Teeth, "H" Type Mill Chains, Attachments, and Sprocket Teeth
ANSI/ISO 14104-1995 磨削后表面回火浸蚀检验 Gears - Surface Temper Etch Inspection After Grinding
ANSI/ASTM E855-1990 静载弹簧用金属板材弯曲试验方法 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ANSI/SAE J110-1997 密封件.径向唇边的试验 Seals - Testing of Radial Lip
ANSI/SAE J1453-1998 O型圈表面密封配件 Fitting - O-Ring Face Seal
ANSI/BHMA A156.26-2006 连续铰链 Continuous Hinges
ANSI/IAPMO UMC1-2006 统一机械规范、2005年注解报告 Uniform Mechanical Code, 2005 Report on Comments
ANSI/ASTM D1921-2001 塑料粒径(筛析法)标准测试方法(08.02) Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)
ANSI/ASTM E11-2001 线织试验筛规范 Specification for Wire-Cloth Sieves for Testing Purposes
ANSI/ASTM E1919-1997 有关粒子和喷雾特性的世界范围内公布的标准指南 Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
ANSI/ASNT CP-189-2006 无损检验人员的资格和认证 Qualification and Certification of Nondestructive Testing Personnel
ANSI/ASTM E1544-1994 阶梯式比对试块结构和用其估算在固体上使用声速测量系统产生误差的惯例 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids
ANSI/ASTM E915-1996 测量剩余应力用的X射线衍射仪验证方法 Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ANSI/EOS/ESD S11.11-1993 静电放电敏感物品防护.静态消散材料表面电阻测量 Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials
ANSI/ESD S1.1-1998 静电放电敏感物品防护.袖口带 Protection of Electrostatic Discharge Susceptible Items - Wrist Straps
ANSI/ESD STM11.11-1993 静电放电敏感性物件的防护.静态耗散平面材料表面电阻的测量 Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials
ANSI/ESD STM11.12-2000 静电放电敏感的灵敏度试验防护试验方法.静态分散平面材料体电阻测量 Test Method for Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials
ANSI/ESD STM11.31-1994 静电放电屏蔽材料性能评价.包 Evaluating the Performance of Electrostatic Discharge Shielding Materials: Bags
ANSI/ESD STM12.1-1997 静电放电敏感物品防护试验方法.座椅.电阻测量 Test Method for Protection of Electrostatic Discharge Susceptible Items - Seating - Resistive Measurement
ANSI/ESD STM2.1-1997 静电放电敏感物品防护试验方法.服装 Test Method for Protection of Electrostatic Discharge Susceptible Items - Garments
ANSI/ESD STM4.2-1998 静电放电敏感物品试验方法.EDS保护工作面放电消散特性 Test Method for Protection of Electrostatic Discharge Susceptible Items - ESD Protective Worksurfaces Charge Dissipation Characteristics
ANSI/ESD STM5.3.1-1999 静电放电敏感的灵敏度试验防护试验方法.放电装置模型元件水平 Test Method for Protection of Electrostatic Discharge Susceptible Sensitivity Testing - Charged Device Model (CDM) Component Level
ANSI/IEEE 4-1995 高压试验的标准技术 Standard Techniques for High-Voltage Testing
ANSI/IEEE 4a-2001 高电压试验技术的修改 Amendment to High Voltage Test Techniques
ANSI/ASME B89.7.2-1999 尺寸测量规划 Dimensional Measurement Planning
ANSI/ASTM D2714-1994 α型LFW-1摩擦和磨损试验机的校准和操作方法(05.02) Calibration and Operation of the Alpha Model LFW-1 Friction and Wear Testing Machine, Method for (05.02)
ANSI/ASTM D3702-1994 用止推垫圈试验机测定在非润滑摩擦接触中材料的磨损率的试验(05.02) Wear Rate of Materials in Unlubricated Rubbing Contact Using a Thrust Washer Testing Machine, Test for (05.02)
ANSI/ASTM D5803-1997 棶湣彿删徛帺讦髕斌油?("湿零档张力") Test Method for Wet Tensile Strength at Zero-Span ("Wet Zero-Span Tensile")
ANSI/ASTM D5804-1997 棶剣制徨帺讦髕斌油?("干零档张力") Test Methods for Zero-Span Breaking Strength ("Dry Zero-Span Tensile")
ANSI/ASTM E1012-1999 在拉伸负荷下验证样品准直性惯例 Practice for Verification of Specimen Alignment Under Tensile Loading
ANSI/ASTM E111-1997 杨氏模量、正切模量和翼弦模量测试方法 Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
ANSI/ASTM E1236-1991 作为参照机的摆捶冲击试验机合格鉴定惯例 Practice for Qualifying Charpy Impact Machines as Reference Machines
ANSI/ASTM E1237-1993 安装抗粘着应变仪指南 Guide for Installing Bonded Resistance Strain Gages
ANSI/ASTM E1319-1989 高温应力测量惯例 Practice for High-Temperature Strain Measurement
ANSI/ASTM E132-1997 室温泊松比试验方法 Test Method for Poisson's Ratio at Room Temperature
ANSI/ASTM E1949-1998 金属连接耐应力规环境温度疲劳寿命试验方法 Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ANSI/ASTM E4-2001 材料试验机加力振动惯例 Practice for Force Verification of Testing Machines
ANSI/ASTM F1702-2002 利用轻便式仪器测量立体声播放系统震动衰减特性的方法 Test Method for Measuring Shock-attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
ANSI/SCTE TP206-2000 元件畸变测量(复合三重跳动和复合二级) Composite Distortion Measurement (Composite Triple Beat & Composite Second Order)
ANSI B89.6.2-1973 尺寸测量的温度和湿度环境 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASME B89.6.2-1973 尺寸测量的温度和湿度环境 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASTM D4871-2006 通用氧化/热稳定性测试仪器指南 Guide for Universal Oxidation/thermal Stability Test Apparatus
ANSI/EIA 364-65-1992 工业用混合流动气体 Industrial Mixed Flowing Gas
ANSI/EIA 364-65A-1997 混合流动气体 Mixed Flowing Gas
ANSI/EIA-364-65A-1997 混合流动气体 Mixed Flowing Gas
ANSI/ASME PTC1-2004 性能试验规则.通用说明书 Performance Test Codes - General Instructions
ANSI/ASME PTC2-2001 定义和数值 Definitions and Values
ANSI/ASTM D6259-1998 定量的沉积限值测定的实施规程 Practice for Determination of a Pooled Limit of Quantitation
ANSI/ASTM D6617-2005 利用标准物的单一测定结果进行实验室偏差测定的实施规程 Practice for Laboratory Bias Detection Using a Single Test Result from a Standard Material
ANSI/ASTM D6624-2006 利用流量分析数据测定加工流动材料集积批平均流动特性值(FPAPV)的惯例 Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ANSI/ASTM D7235-2005 用相关ASTM标准实施规程确立分析仪与测试方法结果之间的线性关联指南 Guide for Establishing a Linear Correlation Relationship Between Analyzer and Test Method Results Using Relevant ASTM Standard Practices
ANSI/ASTM E1169-2007 耐久性试验的实施指南 Guide for Conducting Ruggedness Tests
ANSI/ASTM E177a-2006 ASTM试验方法中精密度和偏倚术语的使用实施规范 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ANSI/ASTM E328-1986 材料和结构应力松弛测试方法 Methods for Stress Relaxation Tests for Materials and Structures
ANSI/ASTM E691-1999 实验室际研究测定试验方法精密度的惯例 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ANSI/ASTM F2048-2000 防滑试验结果报告惯例 Practice for Reporting Slip Resistance Test Results
ANSI N13.11-2001 人员放射量测定功效的检测标准 Personnel Dosimetry Performance, Criteria for Testing
ANSI N13.35-1999 瓶状人体模型生物标定辐射剂量规范 Specifications for the Bottle Manikin Absorbtion Phanthom
ANSI N13.39-2001 内部放射量测定计划设计 Design of Internal Dosimetry Programs
ANSI N13.49-2001 放射性测量的操作和文件 Performance and Documentation of Radiological Surveys
ANSI N13.52-1999 个人用中子剂量计(中子能量低于20 MeV) Personnel Neutron Dosimeters (Neutron Energies Less Than 20 MeV)
ANSI N13.6-1999 职业辐射暴露记录系统实施规程 Occupational Radiation Exposure Records Systems, Practice for
ANSI N317-2005 厂内钚监控用仪器的性能准则 Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring
ANSI N323B-2003 已安装的辐射防护仪器仪表试验和校准.邻近背景操作用便携式测量仪器 Installed Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments for Near Background Operation
ANSI N323D-2002 已安装的辐射防护仪器 Installed Radiation Protection Instrumentation
ANSI N42.12-1994 铊的校准和使用.放射性核素分析用活性碘化钠探测系统 Calibration and Usage of Thallium - Activated Sodium Iodide Detector Systems for Assay of Radionuclides
ANSI N42.13-2004 尾怄栧紸栠淀畋("剂量校准器"电离室的校准和使用 Calibration and Usage of "Dose Calibrator" IonizationChambers for the Assay of Radionuclides
ANSI N42.14-1999 放射性核素γ射线放射速率的测量用锗分光计的校准和使用 Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides
ANSI N42.15-1997 液体闪烁计数系统的性能检定 Performance Verification of Liquid-Scintillation Counting Systems
ANSI N42.17a-2003 保健物理学仪器的性能规范.普通环境条件下使用的便携式仪器 Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
ANSI N42.17B-1989 健康医疗仪器的性能规范.职业性的空气中放射性物质的监控仪器 Performance specifications for health physics instrumentation - Occupational airborne radioactivity monitoring instrumentation
ANSI N42.17C-1989 健康医疗仪器的性能规范.极端环境条件下使用的便携式仪器 Performance specifications for health physics instrumentation - Portable instrumentation for use in extreme environmental conditions
ANSI N42.18-2004 连续监测废水和废气中放射性用现场检测仪器的规范和性能 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
ANSI N42.20-2003 个人放射性辐射监视仪的性能标准 Performance Criteria for Active Personnel Radiation Monitors
ANSI N42.22-1995 可溯源到美国国家标准技术研究院(NIST)的放射源和相关仪器质量控制 Traceability of Radioactive Sources to the National Institute of Standards and Technology (NIST) and Associated Instrument Quality Control
ANSI N42.23-1996 放射性分析实验室的测量和相关仪器质量保证 Measurement and Associated Instrumentation Quality Assurance for Radioassay Laboratories
ANSI N42.25-1997 a/β射线正比计数器的校准和使用 Calibration and Usage of Alpha/Beta Proportional Counters
ANSI N42.27-1999 固态γ放射源不均匀性的测定 Determination of Uniformity of Solid Gamma-Emitting Flood Sources
ANSI N42.28-2002 现场γ射线测量用锗探测器的校准 Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements
ANSI N42.32-2006 国家安检用人员辐射警报检测器的标准 Criteria for Alarming Personal Radiation Detectors for Homeland Security
ANSI N42.33-2006 国家安检用便携式辐射检测仪器 Portable Radiation Detection Instrumentation for Homeland Security
ANSI N42.34-2006 放射性核素检测和识别用手持式仪器的性能标准 Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI N42.35-2006 国家安全防护用放射检测门监视器的评价和性能 Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
ANSI N42.37-2006 国家安全目的阻拦和预防用辐射检测仪器的培训要求 Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
ANSI N42.43-2006 用于国家安全的可移动和可运输辐射监测器的性能标准 Performance Criteria for Mobile and Transportable Radiation Monitors used for Homeland Security
ANSI N42.48-2008 借助分光镜的人体辐射探测器(SPRDs)的性能要求 Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs)
ANSI N42.5-1980 盖革-米勒计数管的管座.石英－纤维静电计式曝光表和相似曝光表的相互关系 Bases for gm counter tubes - Interrelationship of quartz-fiber electrometer type exposure meters and companion exposure meter chargers
ANSI N43.8-2008 分类工业电离辐射计量装置 Classification of Industrial Ionizing Radiation Gauging Devices
ANSI/ANS 6.6.1-1987 LWR核电站直接的和散射的伽马辐射的计算和测量 Calculation and Measurement of Direct and Scattered Gamma Radiation from LWR Nuclear Power Plants,
ANSI/ASTM E1026-2004 弗里克基准剂量测定系统的实施规程 Practice for Using the Fricke Reference Standard Dosimetry System
ANSI/ASTM E1205-2006 三价铈硫酸盐放射量测定系统使用的实施规程 Practice for Use of a Ceric-cerous Sulfate Dosimetry System
ANSI/ASTM E1261-2000 辐射处理用放射性测量系统的选择和校准指南(12.02) Selection and Calibration of Dosimetry Systems for Radiation Processing, Guide for (12.02)
ANSI/ASTM E1275-2004 放射铬箔剂量测定系统使用的实施规范 The Use of a Radiochromic Film Dosimetry System, Practice for (12.02)
ANSI/ASTM E1276-2002 聚甲基丙烯酸甲酯剂量计系统使用的实施规范 Use of Polymethylmethacrylate Dosimetry System, Practice for
ANSI/ASTM E1310-2004 放射铬光学波导管剂量测定系统使用的实施规范 Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
ANSI/ASTM E1401-2003 重铬酸盐剂量测定系统使用的实施规范 Use of a Dichromate Dosimetry System, Practice for (12.02)
ANSI/ASTM E1538-2007 使用乙醇氯苯剂量测定系统的实施规程 Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ANSI/ASTM E1539-2004 辐射灵敏指示器的使用指南 Guide for the Use of Radiation-Sensitive Indicators
ANSI/ASTM E1540-2004 放射铬液体溶液剂量测定系统使用的实施规范 Use of a Radiochromic Liquid Solution Dosimetry System, Practice for (12.02)
ANSI/ASTM E1607-2004 丙胺酸-EPR剂量测定系统使用的实施规范(12.02) Use of the Alanine-EPR Dosimetry System, Practice for (12.02)
ANSI/ASTM E1608-2004 辐射加工用的 X-射线(韧致辐射)装置中剂量测定的实施规程 Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing, Practice for (12.02)
ANSI/ASTM E1631-2003 电子束剂量计测量和剂量计校准用的量热测定系统使用规程 Use of Calorimetric Dosimetry Systems for Electron Beam Dosimeter Measurements and Dosimeter Calibrations, Practice for
ANSI/ASTM E1649-2004 在300 KeV 和 25 MeV 能量之间进行辐射加工用电子束设备中剂量测定的实施规程 Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 300 KeV and 25 MeV, Practice for (12.02)
ANSI/ASTM E1650-2004 乙酸纤维素剂量测定系统的使用规程 Use of a Cellulose Acetate Dosimetry System, Practice for
ANSI/ASTM E1702-2004 辐射加工用γ射线辐射设备的剂量测定实施规范 Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ANSI/ASTM E1707-2004 辐射加工用剂量测定中不确定度的评估指南 Estimating Uncertainties in Dosimetry for Radiation Processing, Guide for (12.02)
ANSI/ASTM E1818-2007 80～300kV能量辐射处理用电子束设备放射量测定使用规程 Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 80 and 300 Kev
ANSI/ASTM E1956-2005 辐射处理用热致发光剂量测定(TLD)系统的使用规程 Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ANSI/ASTM E2116-2001 自含干燥源辐射器的剂量测定惯例 Practice for Dosimetry for a Self-Contained Dry Source Irradiator
ANSI/ASTM E2343-2004 常规剂量测定系统的性能表征标准实施规范 Standard Practice for Performance Characterization of Routine Dosimetery Systems
ANSI/ASTM E2381-2004 流化床和液体流的辐射处理中剂量测定指南 Guide for Dosimetry in Radiation Processing of Fluidized Beds and Fluid Streams
ANSI/IEEE 1160-1993 辐射探测器用高纯度锗晶体的测试程序 Test Procedure for High-Purity Germanium Crystals for Radiation Detectors
ANSI/IEEE 300-1988 半导体带电粒子检测器的试验程序 Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/IEEE 301-1988 电离辐射半导体探测器用放大器和前置放大器的试验程序 Amplifiers and Preamplifiers for Semiconductor Detectors for lonizing Radiation, Test Procedures for
ANSI/IEEE 309/N42.3-1998 盖革-弥勒计数器的试验程序和基础 Test Procedure and Bases for Geiger-Muller Counters
ANSI/IEEE 309-1998 盖革-弥勒计数器试验规程和基础 Test Procedure and Bases for Geiger-Muller Counters
ANSI/IEEE 759-1984 半导体X射线能量频谱仪的试验程序 Semiconductor X-Ray Energy Spectrometers, Test Procedures for
ANSI S2.13/1-1996 非往复机械的机械振动.旋转轴上的测量和评价.第1部分:一般指南 Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation - Part 1: General Guidelines
ANSI S2.16-1997 船载设备的振动噪声测量和验收标准 Vibration Noise Measurements and Acceptance Requirements for Shipboard Equipment
ANSI S2.17-1980 机械振动测量技术 Techniques of machinery vibration measurement
ANSI S2.2-1959 测振计和撞击测量计的校正方法 Methods for the Calibration of Shock and Vibration Pickups
ANSI S2.28-2003 船载机械振动的测量和评价指南 Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery
ANSI S2.29-2003 船载机械上机器转轴振动的测量和评价指南 Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery
ANSI S2.4-1976 冲击和振动测量用辅助模拟设备特性的规定方法 Method for specifying the characteristics of auxiliary analog equipment for shock and vibration measurements
ANSI S2.48-1993 振动发生器的伺服液压试验设备.特性的描述方法 Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics
ANSI S2.9 (R 200x)-1976 规范材料的阻尼性能用命名 Nomenclature for Specifying Damping Properties of Materials
ANSI S2.9-1976 规定材料阻尼特性的专用名词 Nomenclature for Specifying Damping Properties of Materials
ANSI/IEEE 1057-2002 数字化波形记录仪标准 Standard for Digitizing Waveform Recorders
ANSI/ASME B107.14-2004 手动扭矩仪器(机械) Hand Torque Instruments (Mechanical)
ANSI/ASME B40.1-1991 量规.压力显示刻度表型.弹性元件 Gauges - Pressure Indicating Dial Type - Elastic Element
ANSI/ASME PTC19.2-2004 压力测量仪器仪表.第2部分 Pressure Measurement Instruments and Apparatus - Part 2
ANSI/ASTM E74-2001 校准测力仪以效验试验机力刻度的惯例 Practice for Calibration of Force Measuring Instruments for Verifying the Force Indication of Testing Machines
ANSI/ASTM F2070-2001 压力和差动压力电及光纤换能器规范 Specification for Transducers, Pressure and Differential Pressure, Electrical and Fiber Optic
ANSI/ASTM F2569-2007 体育运动用表面压力还原性能评估的试验方法 Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ANSI/ASTM F721-1981 标准管道组装件的规范 Specification for Gage Piping Assemblies
ANSI/UL 404-2006 压缩气体装置用压力指示计的安全标准 Standard for Safety for Gauges, Indicating Pressure, for Compressed Gas Service
ANSI S2.61-1989 加速器机械安装指南 Guide to the mechanical mounting of accelerometers
ANSI/IEEE 1139-1999 基频和时间计量学用物理量标准定义.随机不稳定性 Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities
ANSI/IEEE 1293-2003 线性、单轴、无回旋装置加速度计的标准规范格式指南和试验程序 Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Non-Gyroscopic Accelerometers
ANSI/IEEE 1554-2005 惯性传感器试验设备、仪器、数据获取和分析的推荐实施规程 Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
ANSI/IEEE 1554-200x-2005 惯性传感器试验设备、仪器、数据获取和分析的推荐实施规程 Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
ANSI/IEEE 836-2001 线性加速度计精密离心试验的推荐实施规程 Precision Centrifuge Testing of Linear Accelerometers, Recommended Practice for
ANSI/ASTM D1217-1993 采用宾汉比重瓶对液体密度和相对密度（比重）的试验方法 Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer (05.01)
ANSI/ASTM D1480-2007 用宾厄姆比重计测量粘性材料的密度和相对密度(比重)的试验方法 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer (05.01)
ANSI/ASTM D1481-2002 用利普金双毛细管比重计测定粘性材料的密度和相对密度(比重)的试验方法 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ANSI/ASTM D2161-2004 运动粘度换算成赛波特通用粘度或赛波特重油粘度的方法 Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity, Method for (05.01, 10.03)
ANSI/ASTM D2162-2006 标准粘度计的基本校准方法和粘性油标准的实验方法 Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ANSI/ASTM D2270-2004 40℃和100℃时用运动粘度计算粘度指数的方法 Method for Calculating Viscosity Index from Kinematic Viscosity at 40° and 100°C (05.01)
ANSI/ASTM D4052-1996 用数字式密度计测定液体密度和相对密度的方法 Test Method for Density and Relative Density of Liquids by Digital Density Meter (05.02)
ANSI/ASTM D446-2007 玻璃毛细管运动粘度计的规范和使用说明 Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
ANSI/ASTM D4486-1991 挥发性和活性液体动粘度的试验方法 Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ANSI/ASTM D6022-2006 永久剪切稳定性指数计算惯例 Practice for the Calculation of Permanent Shear Stability Index
ANSI/ASTM D6080-1997 定义液态水粘度特性的惯例 Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
ANSI/ASTM D6616-2007 100?C条件下用锥形滚柱轴承模拟粘度计测量高剪切率时粘度的试验方法 Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 C
ANSI/ASTM D7042-2004 用Stabinger粘度计测定液体的动态粘度和密度的试验方法(运动粘度的计算) Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer ( an D the Calculation of Kinematic Viscosity)
ANSI/ASTM D7109-2007 使用30和90圈下欧洲柴油机注射装置的含液体多聚物的剪切稳定性用试验方法 Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
ANSI NCSLZ 540.3-2006 测量和试验设备校准要求 Requirements for the Calibration of Measuring and Test Equipment
ANSI/ASME PTC19.1-2005 试验不确定度 Test Uncertainty
ANSI/ASME PTC19.22-2007 仪器仪表.数字系统技术 Instruments and Apparatus - Digital Systems Techniques
ANSI/ASTM F2153-2007 背包容量的测量用试验方法 Test Method for Measurement of Backpack Capacity
ANSI/ASTM F2216-2005 选定了强度的设备规范 Specification for Selectorized Strength Equipment
ANSI/ASTM F2277-2003 对选定的强力设备的设计和性能特征进行评定的试验方法 Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ANSI/ASTM F649-2001 用比较程序进行气载颗粒计数器二次校正惯例 Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures
ANSI/ASTM F658-2000 使用近似单向扩散球形颗粒材料定义液体传送颗粒计数器的尺寸、校准、分辨率和计数精度惯例 Practice for Defining Size, Calibration, Resolution, and Counting Accuracy of Liquid-Borne Particle Counter Using Near-Monodisperse Spherical Particulate Material
ANSI/IEEE 270-2006 特别关注国际单位制(SI)用量、单位和相关术语的标准定义 Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
ANSI S3.41-1990 紧急撤离音响信号 Audible emergency evacuation signal
ANSI/ASA S12.14-1992 室外固定位置安装的公共音响警告设备声输出的现场测量用方法 Field Measurement of the Sound Output of Audible Public Warning Devices Installed at Fixed Locations Outdoors, Methods for the
ANSI/ASTM F1465-1999 安全控制系统的选用指南.第３部分:定义操作系统接口 Guide for Selection of Security Control Systems Part III - Defining the Operator System Interface
ANSI/CSAA CS-V-01-2004 警报鉴定和通告规程 Alarm Verification and Notification Procedures
ANSI/FMRC FM3260-2004 自动火灾报警信号设备用辐射能量感应火灾探测器 Radiant Energy-Sensing Fire Detectors for Automatic Fire Alarm Signaling
ANSI/ISA 12.13.01-2002 燃气检测器的性能要求 Performance Requirements, Combustible Gas Detectors
ANSI/ISA 12.13.04/FM6325-2007 开路燃料气体监测仪性能要求 Performance Requirements for Open Path Combustible Gas Detectors
ANSI/ISA 92.02.01Part 1-1998 一氧化碳探测仪用性能要求(50-1000ppm全尺寸) Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)
ANSI/ISA 92.04.01Part 1-2007 探测缺氧/富氧环境用仪器的性能要求 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ANSI/ISA RP77.60.02-2006 火力发电厂人-机接触报警 Fossil Fuel Power Plant Human-Machine Interface Alarms
ANSI/ISA S92.02.01 Part 1-1998 一氧化氯探测仪的性能要求(50-1000ppm全尺寸) Performance Requirements for Chlorine Monoxide Detection Instruments (50-1000 ppm Full Scale)
ANSI/ISA S92.04.01 Part I-1996 探测缺氧或富含氧空气用仪器的性能要求 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Enriched Atmospheres
ANSI/NFPA 72-2007 国家火警编码器 National Fire Alarm Coder
ANSI/UL 1484-2004 住宅煤气检测器 Residential Gas Detectors
ANSI/UL 1638-2003 可视信号发送装置.专用应急和通用信号发送 Visual Signaling Appliances - Private Mode Emergency and General Signaling
ANSI/UL 1971-2004 受损听力信号发送装置 Signaling Devices for the Hearing Impaired (Bulletin dated December 5, 2003)
ANSI/UL 2017-2004 一般用途信令设备和系统 General-Purpose Signaling Devices & Systems
ANSI/UL 2075-2007 气体和蒸气探测器和传感器 Gas and Vapor Detectors and Sensors
ANSI/UL 464-2003 声频信号设备 Audible Signal Appliances
ANSI ATIS0300074-2006 安全管理系统的要求和指南 Guidelines and Requirements for Security Management Systems
ANSI N42.41-2007 用于国家安全的自动审问系统的最低性能标准 Minimum Performance Criteria for Active Interrogation Systems used for Homeland Security
ANSI/IEEE 475-2000 300MHz～40GHz现场干扰传感器用标准测量程序 Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
ANSI/NASPO-SA v3.0P-2005 文件和产品保险业安全保证标准 Security Assurance Standards for the Document and Product Security Industries
ANSI/NFPA 730-2008 房屋安全指南 Guide for Premises Security
ANSI/NFPA 731-2008 电子保密安全系统的安装标准 Standard for the Installation of Electronic Premises Security Systems
ANSI/SIA CP-01-2007 控制板标准.减少误报警的措施 Control Panel Standard - Features for False Alarm Reduction
ANSI/SIA MSD-01-2000 移动安全装置标准.防误传信息监测规程 Mobile Security Devices Standard - Monitoring Practices for False Dispatch Prevention
ANSI/SIA PIR-01-2000 SIA无源红外线移动监测器标准.增强防错报警预防措施 SIA Passive Infrared Motion Detector Standard - Features for Enhancing False Alarm Immunity
ANSI/UL 1023-2004 家用防盗警报系统设备 Household Burglar Alarm System Units
ANSI/UL 1034-2004 防盗电锁装置 Burglary Resistant Electric Locking Machines
ANSI/UL 1037-2004 防盗警报设备 Antitheft Alarms and Devices
ANSI/UL 1076-2004 有专利权的防盗报警设备和系统 Proprietary Burglar Alarm Units and Systems
ANSI/UL 140-2008 保险柜和储藏室的再加锁装置 Relocking Devices for Safes and Vaults
ANSI/UL 1610-2004 中心站防盗警报设备标准 Standard for Central-Station Burglar-Alarm Units
ANSI/UL 1641-2005 住宅防盗报警系统的安装和分类 Installation and Classification Of Residential Burglar Alarm Systems
ANSI/UL 365-2004 与警察局相连的防盗警报装置和系统的安全标准 Standard for Safety for Police Station Connected Burglar Alarm Units and Systems
ANSI/UL 603-2008 防盗报警系统电源的标准 Standard for Power Supplies for Use with Burglar-Alarm Systems (Proposal dated 6-8-07)
ANSI/UL 608-2004 防盗储藏室门和预制墙板 Burglary-Resistant Vault Doors and Modular Panels
ANSI/UL 609-2004 局部防盗警报设备和系统 Local Burglar Alarm Units and Systems
ANSI/UL 634-2007 带有防盗警报的连接器和开关的标准 Standard for Connectors and Switches for Use with Burglar-Alarm Systems (Proposal dated 4-13-07)
ANSI/UL 639-2007 侵入探测装置标准 Standard for Intrusion-Detection Units
ANSI/UL 687-2005 防盗保险柜 Burglary-Resistant Safes
ANSI/UL 752-2006 防弹设备(推荐日期2006-10-20） Bullet-Resisting Equipment (Proposals dated 10/20/06)
ANSI/UL 768-2006 拨码盘式全机械密码锁安全性标准 Standard for Safety for Combination Locks
ANSI/UL 771-2006 夜间货物寄存处 Night Depositories (Proposals dated 12/9/05)
ANSI/UL 786-2006 钥匙锁保险箱(KL级) Key-Locked Safes (Class KL)
ANSI/UL 887-2004 延时计时钟 Delayed-Action Timelocks
ANSI/UL 972-2006 防盗窗用玻璃材料 Burglary Resistant Glazing Material (Proposals dated 12/2/05)
ANSI/NFPA 329-2005 可燃和易燃液体的地下渗漏 Underground Leakage of Flammable and Combustible Liquids
ANSI/UL 1275-2006 易燃液体储存室的安全标准 Standard for Safety for Flammable Liquid Storage Cabinets
ANSI INCITS256-2007 信息技术.射频识别(RFID) Information technology - Radio Frequency Identification (RFID)
ANSI N13.36-2001 工作人员离子辐射安全培训 Ionizing Radiation Safety Training for Workers
ANSI N42.26-1995 防辐射仪器.监测设备.个人用X和γ射线辐射警告装置 Radiation Protection Instrumentation - Monitoring Equipment - Personal Warning Devices for X and Gamma Radiations
ANSI N43.10-2001 全景湿源存储γ辐照器(IV类)和干源存储γ辐照器(II类)的安全设计和使用 Safe Design and Use of Panoramic, Wet Source Storage Gamma Irradiators (Category IV) and Dry Source Storage Gamma Irradiators (Category II)
ANSI N43.15-2001 独立湿源存储γ辐照器(III类)的安全设计和使用 Safe Design and Use of Self-Contained Wet Source Storae Gamma Irradiators (Category III)
ANSI N43.2-2001 X射线衍射和荧光分析设备的辐射安全 Radiation Safety for X-Ray Diffraction and Fluorescence Analysis Equipment Now Copyrighted by HPS * (NBS Handbook 111)
ANSI N43.3-2008 一般辐射安全-装置使用非医用X射线和密封伽玛射线的来源，精力最多可有1 0M eV的 General Radiation Safety - Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies Up to 10 MeV
ANSI N43.6-2007 封闭放射源.分类 Sealed Radioactive Sources - Classification
ANSI N43.7-2007 自备干电源存储辐照器(I类) Self Contained, Dry Source Storage Irradiators (Category I))
ANSI/ANS 6.4.2-2006 辐射屏蔽材料的规范 Radiation Shielding Materials, Specification for
ANSI/ASTM E2303-2003 辐射处理设施中吸收剂量标记指南 Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
ANSI/IEEE 1460-1996 准静态磁场和电场的测量导则 Guide for the Measurement of Quasi-Static Magnetic and Electric Fields
ANSI/IEEE C95.1-2006 与曝露在3kHz～300GHz射频电磁场相关的人体安全等级 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
ANSI/IEEE C95.4-2002 爆破操作中使用电起爆引线时射频发射天线安全距离测定的推荐规范 Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
ANSI Z244.1-2003 能源的切断/警告标记的安全要求 Lock Out/Tag Out of Energy Sources, Safety Requirements for the
ANSI/ESD SP5.1.1-2006 静电放电敏感物品防护的标准实施规程.电源针形量规进行人体模型和机械模型的交替测量方法(0部件等级法) Standard Practice for the Protection of Electrostatic Discharge Susceptible Items - Supply Pin Ganging Human Body Mode (HBM) and Machine Mode (MM) Alternative Test Methods 0 Component Level
ANSI/ESD SP5.1.2-2006 静电放电感应物品防护的标准实施规程.分路信号针.人体模型和机械模型的交替测量方法.部件等级 Standard Practice for the Protection of Electrostatic Susceptible Items - Split Signal Pin - Human Body Model (HBM) and Machine Model (MM) Alternative Test Methods - Component Level
ANSI/IEEE 463-2006 电解电池线性工作区的电气安全规程标准 Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
ANSI/IEEE 625-2001 水泥工业中改进电气维护和安全性的推荐实施规程 Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry
ANSI/NFPA 77-2007 静电学的推荐实施规程 Recommended Practice on Static Electricity
ANSI/FCI 4-1-2007 压力调节器的流体静力壳体试验方法 Pressure Regulator Hydrostatic Shell Test Method
ANSI S2.20-1983 按照大气传播和影响的评定指南对空中单点爆炸的气流特性进行估计 Air Blast Characteristics for Single Point Explosions in Air, with a Guide to Evaluation of Atmospheric Propagation and Effects
ANSI/NFPA 68-2006 爆燃过程的通风指南 Guide for Venting of Deflagrations
ANSI/NFPA 69-2007 防爆系统标准 Standard on Explosion Prevention Systems
ANSI/UL 60079-0-2005 爆炸性气体环境用电气设备的安全标准.第0部分:一般要求 Standard for Safety for Electrical Apparatus Gas Explosive - Part 0: General Requirements
ANSI/UL 60079-11-2002 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,1週勨区枟嬉冉幨|"i" Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 11: Intrinsic Safety "i"
ANSI/UL 60079-1-2005 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,逶勨阺瀲奫堖ó"d"型 Standard for Safety for Electrical Apparatus Gas Explosive - Part 6: Flameproof enclosurers "d"
ANSI/UL 60079-15-2002 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,1逵勨阺戲粤坻?"n" Standard for Safety for Electrical Apparatus Gas Explosive - Part 15: Type of Protection "n"
ANSI/UL 60079-18-2005 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,1逸勨尺蠁?"m"型 Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 18: Encapsulation "m"
ANSI/UL 60079-5-2002 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,逵勨堺八籅枉+"q" Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "q"
ANSI/UL 60079-6-2002 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,逶勨氺涹x"o" Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion "o"
ANSI/UL 60079-7-2002 瀆悸氧伔獓墯疃用氵謔妾瘇宄冉桨儇?笮,逷勨嬺冉恨堧從:"e" Standard for Safety for Electrical Apparatus Gas Explosive - Part 7: Increased safety "e"
ANSI Z535.5-2007 事故预防标记 Accident Prevention Tags
ANSI Z535.6-2006 产品用法说明和其他材料手册的产品安全信息 Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials
ANSI/ANS 3.8.7-1998 应急准备演习和训练的计划、开发、指导和评价准则 Criteria for Planning, Development, Conduct, and Evaluation of Drills and Exercises for Emergency Preparedness
ANSI/ANS 58.21-2007 外部事件概率风险评估(PRA)方法学 External Events PRA Methodology
ANSI/ASTM F1270-1997 应急部署表编制和定位的实施规程 Practice for Preparing and Locating Emergency Muster Lists
ANSI/IEEE 1512.2-2004 急救管理中心用公共安全事故管理信息集标准 Standard for Public Safety Incident Management Message Sets for Use By Emergency Management Centers
ANSI/NFPA 1600-2006 灾害/突发紧急事件管理和业务连续性计划标准 Standard on Disaster/Emergency Management and Business Continuity Programs
ANSI/NFPA 1670-2004 技术救助事故培训和操作 Operations and Trainings for Technical Rescue Incidents
ANSI/NFPA 1994-2001 生化恐怖事件的防护措施标准 Standard on Protective Ensembles for Chemical or Biological Terrorism Incidents
ANSI/AIAA G-035A-2000 人的工作能力测量 Human Performance Measurements
ANSI/ASHRAE 55b-2008 人类居住的热环境条件 Thermal Environmental Conditions for Human Occupancy
ANSI/ASHRAE 55P-2004 人类居住热环境条件 Thermal Environmental Conditions for Human Occupancy
ANSI/IEEE 1023-2004 核电站和其他核装置的系统、设备和装置的人因工程应用的推荐实施规程 Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities
ANSI S2.70-2006 人体感受振动传递至手的测量和评定指南 Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of
ANSI S2.72 Part 1-2002 机械振动和冲击.人体处于全身振动的评定.第1部分:一般要求 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements
ANSI S2.73-2002 机械振动和冲击.手臂振动.手心处手套振动传递率的测量和评定方法 Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the plam of the hand
ANSI S3.18-2002 机械振动和冲击.人体处于全身振动的评价.第1部分:一般要求 Mechanical vibration and shock - Evaluation of human exposure to whole body vibration - Part 1: General requirements
ANSI S3.29-1983 在建筑物中人体感受振动的评测指南 Guide to the evaluation of human exposure to vibration in buildings
ANSI/ISO 10819-1996 机械振动和冲击.手臂振动.手掌上手套振动传递率的测量和评估用方法 Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the plam of the hand
ANSI/ISO 2631-1-1997 机械振动与冲击.人体受全身振动影响的评估.第1部分:一般要求 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements
ANSI S3.13-1987 骨质振动测量仪的机械耦合器 Mechanical Coupler for Measurement of Bone Vibrators
ANSI S3.21-2004 人工纯音阈值测听方法 Manual Pure-Tone Threshold Audiometry, Method for
ANSI S3.6-2004 听力计规范 Specification for Audiometers
ANSI/ISO 12100-2-2007 机械安全.设计用基本概念和一般原则.第2部分:技术原则 Safety of Machinery - Basic Concepts, General Principles for Design. Part 2: Technical Principles
ANSI/UL 61496-1-2001 电敏保护设备.第1部分:一般要求和试验 Electro-Sensitive Protective Equipment, Part 1: General Requirements and Tests
ANSI A10.34-2001 建筑地点及其附近的公共区域的保护 Protection of the Public on and Adjacent to Construction Sites
ANSI A10.38-2000 提供一个安全和健康工作环境雇主计划的基本要素 Basic Elements of an Employer's Program to Provide a Safe and Healthful Work Environment
ANSI Z117.1-2003 有限空间的安全要求 Safety Requirements for Confined Spaces
ANSI Z4.1-1986 工作场所环境卫生的最低要求 Sanitation in Places of Employment - Minimum Requirements
ANSI/AIHA Z10-2005 职业卫生和安全管理系统 Occupational Health and Safety Management Systems
ANSI/ASTM D4276-1996 限行区惯例 Practice for Confined Area Entry
ANSI/ASTM E2030a-2006 荧光(磷光)安全标志推荐用指南 Guide for Recommended Uses of Photoluminescent Phosphorescent Safety Markings
ANSI/ASTM E2072-2004 荧光(磷光)安全标志规范 Specification for Photoluminescent (Phosphorescent) Safety Markings
ANSI/ASTM E2073-2007 光致发光标志适应光亮度的试验方法 Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ANSI/ASTM E2148-2006 金属加工或金属切削液卫生与安全相关文献的使用指南 Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
ANSI/ASTM F2039-2000 船上职业卫生与健康方案基本要素指南 Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program
ANSI/NSF 3-A14159-1999 机械设计的卫生要求 Hygiene Requirements for the Design of Machinery
ANSI/RVIA UPA-1-2000 统一计划验收 Uniform Plan Approval
ANSI Z308.1-2003 工业用整套急救工具的最低要求 Minimum Requirements for Workplace First Aid Kits
ANSI Z358.1-2004 应急洗眼和淋浴用设备 Emergency Eyewash and Shower Equipment
ANSI/NFPA 450-2004 应急医疗设施和系统指南 Guide for Emergency Medical Services and Systems
ANSI/NFPA 1999-2008 急救医疗手术用防护服的标准 Standard on Protective Clothing for Emergency Medical Operations
ANSI/UL 1069-2007 医院信号装置和呼叫护士用设备（推荐日期3/2/2007) Hospital Signaling and Nurse Call Equipment (Proposals dated 3/2/2007)
ANSI/NCCLS H11-A 2-1992 实验室分析用动脉血的经皮采集 Percutaneous Collection of Arterial Blood for Laboratory Analysis
ANSI/NCCLS H15-A 2-1996 血中血红蛋白定量测定的参考程序 Hemoglobin in Blood, Reference Procedure for Quantitative Determination of
ANSI/NCCLS H2-A 3-1996 红细胞沉积率测试方法 Methods for the Erythrocyte Sedimentation Rate (ESR) Test
ANSI/NCCLS H7-A 2-1996 微量红细胞压积法测定包细胞体积的程序 Procedure for Determining Packed Cell Volume by the Microhematocrit Method
ANSI/NCCLS H8-A 2-1997 用乙酸纤维素电泳法检测反常血红蛋白 Abnormal Hemoglobin Using Cellulose Acetate Electrophoresis, Detection of
ANSI/NCCLS M11-A 3-1996 厌氧菌的抗菌易感性试验方法 Antimicrobial Susceptibility Testing of Anaerobic Bacteria, Methods for
ANSI/NCCLS M2-A 6-1997 抗菌盘易感性试验的性能标准 Performance Standards for Antimicrobial Disk Susceptibility Tests
ANSI/NCCLS M7-A 4-1997 细菌需氧增长的稀释抗菌易感性试验方法 Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically
ANSI/AAMI EQ56-1999 医疗设备管理项目的推荐实施规范 Recommended Practices for a Medical Equipment Management Program
ANSI/ASTM E1714-2007 通用保健识别符特性指南(14.01) The Properties of a Universal Healthcare Identifier, Guide for (14.01)
ANSI/ASTM E1959-2006 医疗保健机构医药处方服务提议要求的标准指南 Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
ANSI/ASTM E2017-1999 医疗信息修改件指南 Guide for Amendments to Health Information
ANSI/ASTM E2502-2006 医疗转录工作站的标准指南 Standard Guide for Medical Transcription Workstations
ANSI/HL 7V1.3-2001 健康等级7上下文管理规范1.0版 The Health Level Seven Context Management Specification, Version 1.0
ANSI/ICC 300-2007 露天看台、可折叠远座椅和主看台 Bleachers, Folding and Telescopic Seating, and Grandstands
ANSI/ASTM F2131-2003 密封管用聚氯乙烯薄试样摆锤冲击试验 Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ANSI/AIAA G-003B-2004 标准大气模型的指南 Guide to Reference and Standard Atmosphere Models
ANSI/AIAA G-034-1999 参考和标准电离层模型的指南 Guide to Reference and Standard Ionosphere Models
ANSI/ASTM E799-1992 测定数据标准和液滴大小分析处理惯例 Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ANSI/NSF 245(i1)-2007 氮还原 Nitrogen reduction
ANSI/ASTM E2233-2002 按Aql式编号的变量进行产品流抽样惯例 Practice for Sampling a Stream of Product by Variables Indexed by Aql
ANSI/ASTM E2234-2005 按Aql检索的产品流抽样的实施规程 Practice for Sampling a Stream of Product by Attributes Indexed by Aql
ANSI/ASTM E2555-2007 基于维泊尔分布的寿命和可靠度测试的实施规程和取样程序 Practice and Sampling Procedures for Life and Reliability Testing (based on the Weibull Distribution)
ANSI/NSPI 9-2004 水上娱乐设施 Aquatic Recreation Facilities
ANSI/JCSEE SES-2002 学生评估标准 The Student Evaluation Standards
ANSI/ASME PCC-3-2007 用基于风险法的检查规划 Inspection Planning Using Risk Based Methods
ANSI INCITS118-1998 个人识别码.个人识别码(PIN)的填充字符 Personal Identification Number - PIN Pad
ANSI X3.118-1984 金融服务.人员识别号码.(PIN)的插入 Financial Services - Personal Identification Number - PIN Pad
ANSI X3.149-1986 金融服务.金融交易卡格式.印码信息的位置 Financial Services - Financial Transaction Card Formsets - Location of Imprinted Information
ANSI X9.106-2003 零售金融业务.批发商目录代码 Retail Financial Services - Merchant Category Codes
ANSI X9.95-2005 可信时间戳管理和安全 Trusted Time Stamp Management and Security
ANSI/ASTM E2557-2007 地震尽职评估用最大可能损失(pml)评估的实施规程 Practice for Probable Maximum Loss (pml) Evaluations for Earthquake Due-diligence Assessments
ANSI/INCITS/ISO/IEC 7813-2001 识别卡.金融交易卡 Identification Cards - Financial Transaction Cards
ANSI/ASTM D4968-2000 塑料标准(包括模型精度和偏差说明)年审流程图使用指南(08.03) Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics (08.03)
ANSI/SES 1-2002 标准名称和组织的推荐规程 Recommended Practice for Standards Designation and Organization
ANSI/ASME Y14.34M-1996 相关表格 Associated Lists
ANSI/ASME Y14.35M-1997 工程图纸及其相关文献的修订 Revision of Engineering Drawings and Associated Documents

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点