免费注册 用户登陆
 

畅销书下载

2007中文版ASME锅炉及压力容器规范热销中 在我司购买2007中文版ASME规范将免费获得后续增补。

ASME 锅炉及压力容器规范机05年增补，06年增补
免费下载
ASME 规范增补下载
 免费下载
2004中文版ASME规范 第Ⅰ卷 动力锅炉建造规范 2005年增补 2004中文版ASME规范 第Ⅴ卷 无损检测 2005年增补
2004中文版ASME规范 第Ⅰ卷 动力锅炉建造规范 2006年增补 2004中文版ASME规范 第Ⅴ卷 无损检测 2006年增补
2004中文版ASME规范 第Ⅱ卷 A篇 铁基材料 2005年增补 2004中文版ASME规范 第Ⅷ卷 1 压力容器建造规则 2005年增补
2004中文版ASME规范 第Ⅱ卷 A篇 铁基材料 2006年增补 2004中文版ASME规范 第Ⅷ卷 1 压力容器建造规则 2006年增补
2004中文版ASME规范 第Ⅱ卷 B篇 非铁基材料 2005年增补 2004中文版ASME规范 第Ⅷ卷 2 压力容器另一规则 2005年增补
2004中文版ASME规范 第Ⅱ卷 B篇 非铁基材料 2006年增补 2004中文版ASME规范 第Ⅷ卷 2 压力容器另一规则 2006年增补
2004中文版ASME规范 第Ⅱ卷 C篇 焊条焊丝及填充材料 2005年增补 2004中文版ASME规范 第Ⅷ卷 3 高压容器建造另一规则 2005年增补
2004中文版ASME规范 第Ⅱ卷 C篇 焊条焊丝及填充材料 2006年增补 2004中文版ASME规范 第Ⅷ卷 3 高压容器建造另一规则 2006年增补
2004中文版ASME规范 第Ⅱ卷 D篇 材料性能 2005年增补 2004中文版ASME规范 第Ⅸ卷 焊接及钎焊评定标准 2005年增补
2004中文版ASME规范 第Ⅱ卷 D篇 材料性能 2006年增补 2004中文版ASME规范 第Ⅸ卷 焊接及钎焊评定标准 2006年增补

AWS 美国焊接协会标准文献中英文对照目录 共一页

美国焊接协会 (AWS) 规程、推荐实践、指南和规范包括焊接的各个方面，其中包含建筑和航天应用，结构钢、片钢 和焊接检查证明。

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

AWS D1.1/D1.1M-2006 (有中文版)钢结构焊接规范 RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING
AWS RW14 14号通报：电阻焊机的保养手册 METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY
AWS RW16 16号通报：电阻焊设备标准 STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION
AWS IBSC-2003 2003国际硬钎焊和软钎焊大会论文集 STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
AWS RW 34 34号通报：生产商电阻焊条号数和合金的查询手册 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METAL
AWS RW5 5号通报：电阻焊检查标准 STANDARD METHODS FOR DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING
AWS BUNDLE A-2006 AWS D1.1/D1.1M-2006,AWS A2.4-98,AWS A3.0-2001 STANDARD PROCEDURES FOR DETERMINATION OF MOISTURE CONTENT OF WELDING FLUXES AND WELDING ELECTRODE FLUX COVERINGS
AWS BUNDLE C-2006 AWS A2.4-1998,AASHTO/AWS D1.5M/D1.5-2002 FILLER METAL PROCUREMENT GUIDELINES
AWS PHB-6-2004 AWS D1.1 结构焊接加工和焊接要求的常备袖珍手册 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING - ERRATA: 9/2004
AWS CC-RM-2002 AWS D1.1"结构焊接规范一钢,研究分析"参考手册 SPECIFICATION FOR BARE ALUMINUM AND ALUMINUM-ALLOY WELDING ELECTRODES AND RODS
AWS BUNDLE B-2006 AWS D1.1/D1.1M-2006,AWS D1.2/D1.2M-2003,AWS D1.3-1998,AWS D1.4/D1.4M-2005,AASHTO/AWS D1.5M/D1.5-2002,D1.6-1999 SPECIFICATION FOR TUNGSTEN AND TUNGSTEN-ALLOY ELECTRODES FOR ARC WELDING AND CUTTING
AWS QC19-2002 AWS 机器人电弧焊人员的认证 STANDARDS FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNEL
AWS QC17-2002 AWS 认证焊工程序的认可规范 STANDARDS FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNEL
AWS QC7-1993 AWS认证焊工标准 AWS USER- GUIDE TO FILLER METALS
AWS QC4-1989 AWS认证焊工程序试验设备的认可 TOTAL WELDING MANAGEMENT EXPLAINS THE MANAGEMENT PRINCIPLES, STRUCTURE AND DETAILS YOU NEED TO TRANSFORM YOUR WELDING OPERATIONS FROM A COST CENTER INTO A PROFIT CENTER. MARRIAGE OF TECHNOLOGY AND MANAGEMENT PRINCIPLES-HARDBOUND COPY
AWS C4.2/C4.2M-2006 安全含氧燃气割炬操作建议规范 SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS C4.3/C4.3M-2007 安全含氧燃气加热焊炬操作的推荐规程 SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS
AWS SHF-2003 安全和健康数据表 SPECIFICATION FOR WELDING ELECTRODES AND RODS FOR CAST IRON
AWS SP-1988 安全实践 SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODS
AWS D18.2-1999 奥氏体不锈钢管内部焊接褪色度指南 SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
AWS UEAW-1986 奥氏体焊接的超声波探伤手册 SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING
AWS A5.6/A5.6M-2008 包覆铜和铜合金电弧焊焊条 SPECIFICATION FOR MAGNESIUM ALLOY WELDING ELECTRODES AND RODS
AWS A5.11/A5.11M-2005 保护金属电弧焊镍和镍合金焊条 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS A5.4/A5.4M-2006 保护金属电弧焊用不锈钢焊条 SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING
AWS A5.5/A5.5M-2006 保护金属电弧焊用低合金钢焊条 SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL RODS FOR OXYFUEL GAS WELDING
AWS A5.3/A5.3M-1999 保护金属电弧焊用铝和铝合金焊条 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING
AWS A5.1/A5.1M-2004 保护金属电弧碳钢焊条规范 SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
AWS A5.13-2000 保护金属电弧用堆焊焊条 SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES AND ELECTROGAS WELDING
AWS PHB-7-1998 保护金属弧焊常备袖珍手册 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING
AWS PHSP-WC-&-DC-1996 壁厚<3/4英寸钢管焊接用推荐填充材料和最低预热 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS PASS-1999 不锈钢焊接专业咨询师 SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS A5.9/A5.9M-2006 不锈钢裸焊条和焊棒 SPECIFICATION FOR CONSUMABLE INSERTS
AWS A4.2M-2006 测量奥氏体和双铁素体奥氏体不锈钢焊接金属的&铁素体含量磁性仪器的校准程序 SPECIFICATION FOR WELDING SHIELDING GASES
AWS A4.3-1993 测量马氏贝氏体和铁素体钢电弧焊接金属中可扩撒氢含量的标准方法 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS WQAG-1997 厂主焊接质量保证守则 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS QC10-2004 初能焊工的资格认定和注册 SAFE PRACTICES - REPRINT OF WHB-1 CH 16
AWS D3.5-1993 船身钢板焊接指南 SPECIFICATION FOR COPPER AND COPPER-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS C3.4-1999 吹管硬钎 SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING - ERRATA:2004
AWS C5.2-2001 等离子电弧焊切割推荐规程 SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS
AWS C5.1-1973 等离子电弧焊推荐规程 STANDARD GUIDE FOR DESCRIBING ARC WELDS IN COMPUTERIZED MATERIAL PROPERTY AND NONDESTRUCTIVE EXAMINATION DATABASES
AWS D10.12M/D10.12-2000 低碳钢管焊接指南 WELDING INSPECTOR RESPONSIBILITIES
AWS PAPS-1999 电弧焊电源和相关设备的专业咨询师 SPECIFICATION FOR AUTOMOTIVE RESISTANCE SPOT WELDING ELECTRODES
AWS 电弧焊接和切割的安全 STANDARD GUIDE FOR RECORDING ARC WELD MATERIAL PROPERTY AND NONDESTRUCTIVE EXAMINATION DATA IN COMPUTERIZED DATABASES
AWS AWN-1979 电弧焊接和切割的噪声 GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS
AWS A5.12/A5.12M-1998 电弧焊接和切割用钨和钨合金焊条 GUIDE FOR THE VISUAL EXAMINATION OF WELDS
AWS CAWF-1983 电弧焊烟雾的特征 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS-WELDED CONDITION, WITH BACKING SITE LICENSE
AWS A5.25/A5.25M-1997 电渣焊用碳钢我低合金钢焊条 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C7.3-1999 电子束焊接程序规范 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1 TO M-8, P-8 OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C7.1M/C7.1-2004 电子束焊接推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1, P-1, S-1 TO M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C1.5-2005 电阻焊工考核 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL, (M-1 TO M-8/P-8/S-8, GROUP 1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C1.1M/C1.1-2000 电阻焊接推荐实施规程 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED CONDITION, PRIMARILY PIPE AP
AWS RWVID 电阻焊入门，录相片 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L)-15, -16, OR -17, AS-WELDED CONDITION, P
AWS RWM 电阻焊手册，第四版 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/ S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/ P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER309(L)
AWS PARW-1998 电阻焊专业咨询师 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, IN309 AND ER309(L),
AWS WZC-1972 镀锌钢的焊接 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1,GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8,GROUP 1),1/8 THROUGH 1-1
AWS G2.1M/G2.1-2002 锻造镍基合金指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SITE LICENSE SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS-WELDED CONDITION, WITH BACKING
AWS D14.7/D14.7M-2005 堆焊和工业轧辊再处理推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SITE LICENSE SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
AWS A5.21-2001 堆焊作裸焊条和焊棒 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING OF GALVANIZED STEEL, (M-1), 18 THROUGH 10 GAUAGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS API-M-2001 对 API 1104“管道和相关设备焊接 参考手册 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL, (M-1, GROUP 1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS F1.1M-2006 对焊接和相关工艺在空气中产生县浮颗粒的取样方法 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF GALVANIZED STEEL,(M-1) 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS EG3.0-1996 二级焊工培训和考核指南 中级焊工 STUD WELDING PROCEDURE SPECIFICATION (WPS) OR PROCEDURE QUALIFICATION RECORD (PQR) OR WELDING QUALIFICATION RECORD (WQR)
AWS PRG-1995 放射性检查验收准则实肜参考指南 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1, P-1 OR S-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C3.5-1999 感应加热钎焊 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF GALVANIZED STEEL(M-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE - ERRATA: 01/2005
AWS C2.23M/C2.23-2003 钢防腐用铝、锌及其合金作复合物絷喷涂（金属化） STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1,P-1, OR S-1 TO M-1, P-1 OR S-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS C2.20/C2.20M-2002 钢筋混凝土热喷涂锌阳极 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS QC12-1996 高级焊工的资格认定和认证 THERMAL SPRAYING - PRACTICE, THEORY, AND APPLICATION
AWS A5.24/A5.24M-2005 锆和锆合金焊条和焊棒 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS D10.8-1996 铬钼钢管焊接局部加热推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E71T-8, AS-WELDED CONDITION SITE LICENSE
AWS D14.1/D14.1M-2005 工业和工厂用起重机和其它物料搬运设备焊接 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED CONDITION SITE LICENSE
AWS C3.3-2002 关键钎焊件的设计、制作与检查 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR 75% AR/25% CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS D10.10/D10.10M-1999 管和管道焊接局部加热推荐规程 NONDESTRUCTIVE EXAMINATION (NDE) PROCESSES
AWS IFS CD 国际焊接填充金属分类索引 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2 AND E7018, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS PAPQV-2005 过程鉴定要素的职业咨询师 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS C4.5M-2006 含氧燃料喷嘴的统一标识 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION SITE LICENSE
AWS OWS-1990 含氧燃烧料焊接、切割和加热的安全 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1/2 INCH THICK, E71T-11, AS-WELDED CONDITION SITE LICENSE
AWS B4.0-2007 焊缝机械试验方法 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION, (PRIMARILY PIPE APPLIC
AWS B4.0M-2000 焊缝检机械试验方法 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION (PRIMARILY PIPE APPLI
AWS B1.11-2000 焊缝视检 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL), AS-WELDED CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE
AWS B1.10-1999 焊缝无损探伤 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), AS-WELDED CONDITION (PRIMARILY PIPE APP
AWS B5.4-2005 焊工考核设备鉴定 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT CONDITION (PRIMARILY
AWS EG2.0-1995 焊工培训和考核指南 初级焊工 REPORT OF MAGNETIC-PARTICLE EXAMINATION OF WELDS
AWS GWF-1998 焊工培训设备的安装指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2, AS- WELDED OR PWHT CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE
AWS A2.4-2007 焊接、钎焊和无损检测用符号 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED OR PWHT CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE
AWS Z49.1-2005 焊接、切割和相关工艺的安全 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2 AND E7018, AS-WELDED OR PWHT CONDITION (PRIMARILY PIPE AP
AWS SGSH-2003 焊接安全和健康和第三方车间指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERTS OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, INMS-1 AND ER70S-2, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS SIT
AWS D10.4-1986 焊接奥氏体铬镍不锈钢管道的推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S- 1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK INMS-1, ER70S-2, AND E7018, AS-WELDED
AWS A5.32/A5.32M-1997 焊接保护气体 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, E7XT-X, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS
AWS B2.1-2005 焊接程序和性能鉴定 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 2% OXYGEN SHIELDED GAS METAL ARC WELDING (SPRAY TRANSFER MODE) OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-3, FLAT POSITION ONLY, AS-WELDED OR PWHT CONDI
AWS EWH1-12 焊接对健康的影响 SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION
AWS EWH1 焊接对健康的影响,索引I~XII STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF ALUMINUM, (M/P/S-22 TO M/P/S-22), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS DPW-1999 焊接费用_效能的设计手册 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), ER80S-B2, 1/8 THROUGH 1/2 IN. THICK AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLICATIO
AWS A2.1-DC-1998 焊接符号表、桌面图和挂图 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT COND
AWS A2.1-WC-&-DC-1998 焊接符号表、桌面图和挂图 WELDING AND NONDESTRUCTIVE EXAMINATION SYMBOLS
AWS PRGC-1999 焊接腐蚀-原因和处置实用参考指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT) OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), E8018-B2, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION
AWS A1.1-2001 焊接工业的米制实施规程指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT) FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1
AWS FSW-1992 焊接和切割的防火安全 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), ER90S-B3, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLICATIONS SITE LIC
AWS C5.10/C5.10M-2003 焊接和切割用保护气体推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, ER90S
AWS F1.5M-2003 焊接和相关工艺气体取样和分析方法 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT) OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, IN521 AND ER90S-B3, P
AWS F1.2-2006 焊接和相关工艺中测量烟雾形成速度和总烟雾排放量的实验方法 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT) FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THI
AWS F1.3-1999 焊接环境污染评定的取样方法指南 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF AUSTENITIC STAINLESS STEEL (M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING; SITE LICENSE
AWS FUMES&GASES 焊接环境中的烟雾和气体 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8,P-8,OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS PCWC-2001 焊接或切割容器的制备 STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL, (SWPS) 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE
AWS B5.9-2006 焊接监理的资格认定 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, AS-WELDED CONDITION SITE LICENSE
AWS PRGVT-1999 焊接检查管理-压力容器和压力管道的实用参考指南 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER3XX, AS-WELDED CONDITION PRIMARILY PLATE AND STRUCTURAL APPLICATIONS SITE
AWS WIT-T-2000 焊接检查技术 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E3XX-XX, AS-WELDED CONDITION, PRIMARILY PLATE AND STRUCT
AWS WIT-W-99-1999 焊接检查技术工作手册 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER3XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS
AWS WI-2000 焊接检查手册 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER3XX-XX, AS-WELDED CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE
AWS QC1-2007 焊接检查员的AWS认证 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER3XX, E3XX-XX AS-WELDED CONDITION, PRIMARILY PIPE APPLI
AWS B5.1-2003 焊接检查员的资格认证规范 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, IN3XX AND ER3XX, AS-WELDED CONDITION, (PRIMARILY PIPE APPLICATIONS)
AWS CM-2000 焊接检查员认证手册 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, IN3XX, ER3XXX, AND E3XX-XX, AS-WE
AWS B5.2-2001 焊接检查专家和焊接检查助理的资格认证 STANDARD FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
AWS B5.5-2000 焊接教员的资格认定 SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION FOR THERMOPLASTICS
AWS QC5-1991 焊接教员认证 HANDBOOK ON THE ULTRASONIC EXAMINATION OF AUSTENITIC WELDS
AWS PHSS-WC-&-DC-1996 焊接结构钢推荐的预热温度 STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
AWS FMC DC&WC 焊接结构推荐用填充金属 SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS
AWS TWM-2004 焊接全面管理 SPECIFICATION FOR THE QUALIFICATION OF WELDING SALES REPRESENTATIVES
AWS WHB-2.8-SPANISH-1991 焊接手册,第八版,第二卷:焊接工艺 SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
AWS WHB-2.9 焊接手册,第九版,第二卷:焊接工艺 第一部分 SPECIFICATION FOR THE QUALIFICATION OF WELDING ENGINEERS
AWS WHB-1.9 焊接手册,第九版,第一卷:焊接科学和技术 SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS
AWS WHB-4.8 焊接手册第八版.第三卷:材料和应用第二部分 SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTOR SPECIALISTS AND WELDING INSPECTOR ASSISTANTS
AWS WHB-3.8 焊接手册第八版.第三卷:材料和应用第一部分 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
AWS A3.0-2001 焊接术语和定义，凶括粘接、铜焊、热切割和热喷涂 SPECIFICATION FOR THE QUALIFICATION OF WELDING EDUCATORS
AWS WPERF-1998 焊接完美:完美焊接的入门指南 SPECIFICATION FOR THE QUALIFICATION OF WELDING SUPERVISORS
AWS F3.2M/F3.2-2001 焊接烟雾通风指南 RECOMMENDED PRACTICES FOR RESISTANCE WELDING
AWS WM-1.4-1994 焊接冶金,碳钢和合金钢.第一卷:基础 SPECIFICATION FOR RESISTANCE WELDING OF CARBON AND LOW-ALLOY STEELS
AWS PRGWM-1999 焊接冶金—可焊接核心概念的实用参考指南 SPECIFICATION FOR THE QUALIFICATION OF RESISTANCE WELDING TECHNICIAN
AWS PHB-5-2003 焊接业米制换算常备袖珍手册 GUIDE FOR THERMAL-SPRAY OPERATOR QUALIFICATION
AWS A4.4M-2001 焊接助熔剂和电焊条焊药皮含水量的测定的标准规程 SPECIFICATIOPN FOR THERMAL SPRAYING ZINC ANODES ON STEEL REINFORCED CONCRETE
AWS D17.1-2001 航空熔焊规范 SPECIFICATION FOR THERMAL SPRAY EQUIPMENT ACCEPTANCE INSPECTION
AWS PHB-1-1994 弧焊钢的常备袖珍手册 SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL - NACE 12, SSPC-CS 23.00
AWS F1.6-2003 环境保护局评定焊接排放和通风许可报告指南 SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK SOLID AND COMPOSITE WIRE AND CERAMIC RODS
AWS D8.8M-2007 机动车和轻型卡车零件的焊接质量 电弧焊 RECOMMENDED PRACTICES FOR DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL BRAZED COMPONENTS
AWS AWR-1995 机器人电弧焊，行否 SPECIFICATION FOR TORCH BRAZING
AWS D16.1M/D16.1-2004 机器人电弧焊的安全 SPECIFICATION FOR INDUCTION BRAZING
AWS D16.3M/D16.3-2001 机器人电弧焊风险评估导则 SPECIFICATION FOR FURNACE BRAZING
AWS D16.4M/D16.4-2005 机器人电弧焊人员资质鉴定规范 SPECIFICATION FOR ALUMINUM BRAZING
AWS D16.2/D16.2M-2001 机器人电弧焊装置的零部件 SPECIFICATION FOR THE ULTRASONIC EXAMINATION OF BRAZED JOINTS
AWS D14.4/D14.4M-2005 机械设备焊接接头规范 RECOMMENDED PRACTICES FOR SAFE OXYFUEL GAS CUTTING TORCH OPERATION
AWS C7.2-1998 激光束焊接、切割或钻削推荐规程 RECOMMENDED PRACTICES FOR SAFE AND OXYFUEL GAS HEATING TORCH OPERATION
AWS FWSH-1997 角焊尺寸计算的设计手册 RECOMMENDED PRACTICES FOR HEAT SHAPING AND STRAIGHTENING WITH OXYFUEL GAS HEATING TORCHES
AWS JWE-1997 杰费逊焊接百科全书 RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING - ERRATA 2003: 04/27/2004
AWS D1.3/D1.3M-2008 结构焊接规范 薄钢板 RECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGING
AWS D1.8/D1.8M-2005 结构焊接规范 地震补充件 RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING
AWS D1.2/D1.2M-2003 结构焊接规范 铝 RECOMMENDED PRACTICES FOR GAS METAL ARC WELDING
AWS D1.4/D1.4M-2005 结构焊接规范 增强钢 RECOMMENDED PRACTICES FOR ELECTROGAS WELDING
AWS PHB-3-2004 结构用焊接头常备袖珍手册 RECOMMENDED PRACTICES FOR FRICTION WELDING
AWS D1.6/D1.6M-2007 结构烛接规范 不锈钢 RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING
AWS D9.1M/D9.1-2000 金属薄板焊接规范 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND DRILLING
AWS C6.2/C6.2M-2006 金属摩擦焊 SPECIFICATION FOR FRICTION WELDING OF METALS
AWS PHB-4-2003 金属气焊和药芯弧焊常备袖珍手册 PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING
AWS F2.2-2001 镜头遮光罩选择器 CODE CLINIC FOR STUDY OF AWS D1.1 STRUCTURAL WELDING CODE-STEEL - REFERENCE MANUAL - SECOND PRINTING OCTOBER 2003
AWS C2.18-1993 具有铝、锌及其合金和复合物热喷涂镀层钢的防护导则 STRUCTURAL WELDING CODE ALUMINUM - FOURTH EDITION; ERRATA:2004
AWS GTW-2005 可焊性指南:碳钢和低合金钢 STRUCTURAL WELDING CODE - REINFORCING STEEL - ERRATA 10/2005
AWS C5.3-2000 空气碳弧刨和切割推荐规程 STRUCTURAL WELDING CODE - STAINLESS STEEL
AWS C3.6-1999 炉内钎焊 STRUCTURAL WELDING CODE - SEISMIC SUPPLEMENT
AWS PRGQA-2001 铝高质量熔焊实用参考指南 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
AWS D10.7M/D10.7-2000 铝和铝合金管道气体保护电弧焊导则 GUIDE FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING
AWS PHB-8-1998 铝气体金属电弧焊常备袖珍手册 GUIDE FOR WELDING MILD STEEL PIPE
AWS C3.7M/C3.7-2005 铝钎焊 RECOMMENDED PRACTICES FOR THE BRAZING OF COPPER TUBING AND FITTINGS FOR MEDICAL GAS SYSTEMS
AWS D3.7-2004 铝制船体焊接指南 RECOMMENDED PRACTICES FOR WELDING AUSTENITIC CHROMIUM-NICKEL STAINLESS STEEL PIPING AND TUBING
AWS C5.4-1993 螺柱焊推荐规程 RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPE AND TUBING
AWS A5.17/A5.17M-1997 埋弧焊碳钢焊条和焊剂 GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE
AWS A5.23/A5.23M-1997 埋弧焊用低合金钢焊条和焊剂 RECOMMENDED PRACTICES FOR WELDING OF CHROMIUM-MOLYBDENUM STEEL PIPING AND TUBING
AWS WELDACADEMY 美国焊接学院 GUIDE FOR WELDING IRON CASTINGS
AWS A5.19-1992 镁合金焊条和焊棒 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
AWS C6.1-1989 摩擦焊推荐规程 SPECIFICATION FOR METAL CUTTING MACHINE TOOL WELDMENTS
AWS PRGHF-2002 耐磨堆焊实肜参考指南 SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENT
AWS A5.14/A5.14M-2005 镍和镍合金裸焊条和焊棒 SPECIFICATION FOR WELDED JOINTS IN MACHINERY AND EQUIPMENT - THIRD EDITION
AWS ULR-1976 漆层的超声波反射 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
AWS C5.7-2000 气电焊推荐规程 SPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENT - 3RD EDITION
AWS A5.26/A5.26M-1997 气电焊用碳钢和低合金钢焊条 RECOMMENDED PRACTICES FOR SURFACING AND RECONDITIONING OF INDUSTRIAL MILL ROLLS - 1ST EDITION
AWS G1.10M-2001 气焊、气焊挤压和加热塑料对焊的评价指南 RAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVES
AWS A5.18/A5.18M-2005 气体保护电弧焊用碳钢和焊棒 SPECIFICATION FOR ROBOTIC ARC WELDING SAFETY
AWS A5.28/A5.28M-2005 气体保护金属电弧焊用低合金钢焊条和焊棒 GUIDE FOR COMPONENTS OF ROBOTIC AND AUTOMATIC ARC WELDING INSTALLATIONS
AWS C5.6-1989 气体金属电弧焊推荐规程 RISK ASSESSMENT GUIDE FOR ROBOTIC ARC WELDING
AWS D8.9M-2002 汽车薄钢材电阻点焊性能评定的试验方法 SPECIFICATION FOR THE QUALIFICATION OF ROBOTIC ARC WELDING PERSONNEL - 2ND EDITON
AWS D8.6-2005 汽车电阻点焊焊条 SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS - INCORPORATING ERRATA - 07/2001
AWS D8.7M-2005 汽车焊接质量推荐规程 电阻点焊 SPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN SANITARY (HYGIENIC) APPLICATIONS
AWS D8.14M/D8.14-2000 汽车和轻型卡车零件的焊接质量 铝电弧焊 GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE
AWS B2.2-1991 钎焊程序和性能鉴定 SPECIFICATION FOR WELDING OF TANKS, VESSELS, AND OTHER EQUIPMENT IN SANITARY (HYGIENIC) APPLICATIONS
AWS A5.31-1992 钎焊和硬钎焊用焊剂 GUIDE FOR STEEL HULL WELDING
AWS C3.8M/C3.8-2005 钎焊接头超声波检查推荐规范 SPECIFICATION FOR UNDERWATER WELDING
AWS C3.2M/C3.2-2001 钎焊接头强度评定的标准方法 GUIDE FOR ALUMINUM HULL WELDING - ERRATA 6/15/2004
AWS A5.8/A5.8M-2004 钎焊填充金属 SPECIFICATION FOR AUTOMOTIVE AND LIGHT TRUCK COMPONENTS WELD QUALITY - ALUMINUM ARC WELDING
AWS D1.5M/D1.5-2005 桥梁焊接规范 RECOMMENDED PRACTICES FOR AUTOMOTIVE WELD QUALITY RESISTANCE SPOTWELDING - SUPERSEDES D8.7:1988
AWS C2.16/C2.16M-2002 热喷涂操作员资质认证指南 SPECIFICATION FOR AUTOMOTIVE WELD QUALITY - ARC WELDING OF STEEL
AWS C2.21M/C2.21-2003 热喷涂设备的验收检验 RECOMMENDED PRACTICES FOR TEST METHODS FOR EVALUATING THE RESISTANCE SPOT WELDING BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALS - SAE D8.9M-2002
AWS TSS-1985 热喷涂实践、理论和应用 SHEET METAL WELDING CODE
AWS TSM-1996 热喷涂手册 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES
AWS C2.25/C2.25M-2002 热喷涂原料组成、固体和复合线和瓷棒 LABORATORY METHOD FOR MEASURING FUME GENERATION RATES AND TOTAL FUME EMISSION OF WELDING AND ALLIED PROCESSES
AWS B2.4-2006 热塑塑料焊接程序和性能鉴定 SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT
AWS G1.2M/G1.2-1999 热塑性塑料的标准超声波试件 METHODS FOR ANALYSIS OF AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES
AWS CMWS-2005 认可焊接监察员的质量和生产率推进手册 METHODS FOR SAMPLING AND ANALYZING GASES FROM WELDING AND ALLIED PROCESSES
AWS F4.1-1999 容器和管道焊接和切割准备推荐安全规程 LENS SHADE SELECTOR
AWS A5.30/A5.30M-2007 熔化填料焊条 SPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND SCREENS
AWS SHB-1999 软钎焊手册 VENTILATION GUIDE FOR WELD FUME
AWS EG4.0-1996 三能焊工培训和考核指南 高能焊工 FIRE SAFETY IN WELDING AND CUTTING
AWS PRGWA-2002 商用铝焊接实用参考指南 RECOMMENDED SAFE PRACTICES FOR THE PREPARATION FOR WELDING AND CUTTING OF CONTAINERS AND PIPING
AWS D14.6/D14.6M-2005 设备旋转件焊接规范 GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDS
AWS PWE-2000 实践焊接工程师 SPECIFICATION FOR STANDARDIZED ULTRASONIC WELDING TEST SPECIMEN FOR THERMOPLASTICS
AWS VIW-M-1997 视检车间参考手册 GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS - REPRINTED, INCORPORATES ERRATA: OCTOBER 2003
AWS PHB-2-2000 视检和焊接缺陷常备袖珍手册—原因和解决方法 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
AWS D3.6M-1999 水下焊接 SAFETY IN WELDING, CUTTING AND ALLIED PROCESSES
AWS D10.6/D10.6M-2000 钛管道和气钨电弧焊推荐规程 WELDING SYMBOLS CHART - DESK SIZE (LAMINATED) - ***SEE GLOBAL ENGINEERING DOCUMENTS (1-800-854-7179) TO ORDER YOUR COPY***
AWS PRGT-1999 钛焊接实用参考指南 WELDING SYMBOLS WALL AND DESK CHARTS (LAMINATED)
AWS A5.16/A5.16M-2004 钛和钛合金焊条和焊棒 WELDING SYMBOLS CHART - WALL SIZE OF A2.1 (LAMINATED)
AWS C1.4M/C1.4-1999 碳钢和低合金钢电阻焊 STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION BOOK AND CHARTS SET
AWS FMC-2000 填充金属比对图 SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS A5.01-1993 填充金属采购指南 SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM-ALLOY WELDING ELECTRODES AND RODS
AWS D15.2-2003 铁路车辆用轨道和相关轨道零件的焊接推荐规程 SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR ELECTROSLAG WELDING
AWS D15.1/D15.1M-2007 铁路焊接规范 汽车和机车 SPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDING
AWS A5.7/A5.7M-2007 铜和铜合金裸焊棒和焊条
AWS F2.3M-2001 透明焊接帘门和帘幕的使用和性能 SPECIFICATION FOR COPPER AND COPPER-ALLOY BARE WELDING RODS AND ELECTRODES
AWS D14.3/D14.3M-2005 土方、建筑和农业设备的焊接规范 FILLER METAL PROCUREMENT GUIDELINES
AWS D18.1-1999 卫生洁具肜奥氏体为锈钢管和管系的焊接规范 SAFE PRACTICES FOR WELDING AND CUTTING CONTAINERS THAT HAVE HELD COMBUSTIBLES
AWS D18.3/D18.3M-2005 卫生用水槽、容器和其它器具的焊接规范 CODE CLINIC FOR STUDY OF API STANDARD 1104 EIGHTEENTH EDITION WELDING OF PIPELINES AND RELATED FACILITIES - INSTRUCTION MANUAL
AWS C5.5/C5.5M-2003 钨电极保护气体电弧焊推荐规程 CODE CLINIC FOR STUDY OF API STANDARD 1104 NINETEENTH EDITION WELDING OF PIPELINES AND RELATED FACILITIES - REFERENCE MANUAL
AWS D10.11M/D10.11-2007 无衬管根部焊道焊接的推规程 INSPECTION REPORTS
AWS A5.10/A5.10M-1999 无药皮铝和铝合金焊条和焊棒 MONITORING AND CONTROL OF WELDING AND JOINING PROCESSES
AWS D14.5-1997 压机和压机零件规范 MECHANIZED, AUTOMATED, AND ROBOTIC WELDING
AWS C4.1-SET-2003 氧切割表面和氧切割表面粗糙度检验规的说明准则 ECONOMICS OF WELDING AND CUTTING
AWS A5.2/A5.2M-2007 氧燃烧料气焊用碳钢和低合金焊条 WELDING METALLURGY
AWS A5.22-1995 药芯弧焊用不锈钢焊条和钨电极惰性气体保护不锈钢药芯焊棒 DESIGN FOR WELDING
AWS A5.20/A5.20M-2005 药芯弧焊用碳钢焊条 TEST METHODS FOR EVALUATING WELDED JOINTS
AWS A5.29/A5.29M-2005 药苡电弧焊用低合金焊条 RESIDUAL STRESS AND DISTORTION
AWS D10.13/D10.13M-2001 医用气体系统铜管和管件钎焊的推荐规程 SAFETY
AWS BRS-1992 硬钎焊安全 SYMBOLS FOR JOINING AND INSPECTION
AWS BRH-1991 硬钎焊手册 ARC WELDING AND CUTTING NOISE
AWS LVOS-1983 用防溢冲击器对臭氧取样的实验室鉴定 ARC WELDING WITH ROBOTS: DO- AND DON-S
AWS C4.4/C4.4M-2007 用含氧燃气加热喷灯加热成形和矫直的推荐规程 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT CONDITION (PRIMARILY PI
AWS UGFM-1995 用户填充金属指南 STANDARD WELDING PROCEDURE SPECIFICATION(SWPS)FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE)FOLLOWED BY ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL(M-1/P-1/S-1,GROUPS 1 A
AWS QC11-1996 中能焊工的资格认定和注册 THERMAL SPRAY MANUAL - A PRACTICLE REFERENCE GUIDE
AWS D11.2-1989 铸铁焊接导则 STANDARD WELDING PROCEDURE SPEC (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY ARGON PLUS 2% OXYEN SHIELDED GAS METAL ARC WELDING(SPRAY TRANSFER MODE)OF CARBON STEEL(M-1/P-1/S-1, GR 1 &
AWS A5.15-1990 铸铁用焊条和焊棒 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), E8018-B2, 1/8 THROUGH 1/2 IN. THICK AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLIC
AWS A9.1-1992 标准的焊接工艺规范（ WPS ）交易屏蔽金属弧焊铬钼钢（ m-5a/p-5a ） ， er9018 - B3中， 1 / 8通过1 / 2 。厚，焊接条件下， 1 / 8通过1-1/2在。厚， pwht条件，主要是管申请静坐 STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), ER9018-B3, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLICATIONS SIT
AWS A9.2-1992 标准方法力学性能测试的焊缝 STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
AWS B2.1.001-1990 钎焊手册1991年第4版 BRAZING HANDBOOK 1991 FOURTH EDITION
AWS B2.1.002-1990 术语的定义-第四e ditioin DEFINITIONS OF TERMS - FOURTH EDITIOIN
AWS B2.1-1/8-006-2002 性能brazeable金属和合金-第四版 PROPERTIES OF BRAZEABLE METALS AND ALLOYS - FOURTH EDITION
AWS B2.1-1/8-010-2002 热膨胀的数据-第四版 THERMAL EXPANSION DATA - FOURTH EDITION
AWS B2.1-1/8-014-2002 炉中钎焊-第四版 FURNACE BRAZING - FOURTH EDITION
AWS B2.1-1/8-227-2002 感应钎焊-第四版 INDUCTION BRAZING - FOURTH EDITION
AWS B2.1-1/8-228-2002 基本面-第四版 FUNDAMENTALS - FOURTH EDITION
AWS B2.1-1/8-229-2002 浸焊-第四版 DIP BRAZING - FOURTH EDITION
AWS B2.1-1/8-230-2002 电阻钎焊-第四版 RESISTANCE BRAZING - FOURTH EDITION
AWS B2.1-1/8-231-2002 钎焊-第四版 BRAZE WELDING - FOURTH EDITION
AWS B2.1-1-001-1990 其他进程-第四版 OTHER PROCESSES - FOURTH EDITION
AWS B2.1-1-002-1990 检查钎焊接头-第四版 INSPECTION OF BRAZED JOINTS - FOURTH EDITION
AWS B2.1-1-003-2002 守则和其他标准-第四版 CODES AND OTHER STANDARDS - FOURTH EDITION
AWS B2.1-1-004-2002 铜及铜合金-第四版 COPPER AND COPPER ALLOYS - FOURTH EDITION
AWS B2.1-1-007-2002 贵金属 PRECIOUS METALS
AWS B2.1-1-008-2002 低碳钢，低合金，钢和工具钢-第四版 LOW CARBON, LOW ALLOY, AND TOOL STEELS - FOURTH EDITION
AWS B2.1-1-011-2002 钎焊铸铁-第四版 BRAZING OF CAST IRON - FOURTH EDITION
AWS B2.1-1-012-2002 brazement的设计和起草室的实践-第四版 BRAZEMENT DESIGN AND DRAFTING ROOM PRACTICE - FOURTH EDITION
AWS B2.1-1-016-1994 管和管-第四版 PIPE AND TUBE - FOURTH EDITION
AWS B2.1-1-017-1994 镍基和钴合金-第四版 NICKEL BASE AND COBALT-CONTAINING ALLOYS - FOURTH EDITION
AWS B2.1-1-018-1994 不锈钢-第四版 STAINLESS STEELS - FOURTH EDITION
AWS B2.1-1-019-1994 铝及铝合金-第四版 ALUMINUM AND ALUMINUM ALLOYS - FOURTH EDITION
AWS B2.1-1-020-1994 镁及镁合金-第四版 MAGNESIUM AND MAGNESIUM ALLOYS - FOURTH EDITION
AWS B2.1-1-021-1994 钛，锆，铍-第四版 TITANIUM, ZIRCONIUM, AND BERYLLIUM - FOURTH EDITION
AWS B2.1-1-022-1994 难熔金属-铌，钼，钽，钨-第四版 REFRACTORY METALS - NIOBIUM, MOLYBDENUM, TANTALUM, AND TUNGSTEN - FOURTH EDITION
AWS B2.1-1-026-1994 电子管和真空钎焊设备-第四版 ELECTRON TUBE AND VACUUM EQUIPMENT BRAZING - FOURTH EDITION
AWS B2.1-1-027-1998 硬质合金刀具-第四版 CARBIDE TOOLS - FOURTH EDITION
AWS B2.1-1-201-1996 陶瓷钎焊-第四版 CERAMIC BRAZING - FOURTH EDITION
AWS B2.1-1-202-1996 钎料的金属-第四版 BRAZING FILLER METALS - FOURTH EDITION
AWS B2.1-1-203-1996 碳和石墨-第四版 CARBON AND GRAPHITE - FOURTH EDITION
AWS B2.1-1-204-1996 蜂窝结构的钎焊-第四版 HONEYCOMB STRUCTURE BRAZING - FOURTH EDITION
AWS B2.1-1-206-1996 通量和大气-第四版 FLUXES AND ATMOSPHERES - FOURTH EDITION
AWS B2.1-1-207-1996 耐蚀性钎焊接头-第四版 CORROSION RESISTANCE OF BRAZED JOINTS - FOURTH EDITION
AWS B2.1-1-208-1996 安全与健康-第四版 SAFETY AND HEALTH - FOURTH EDITION
AWS B2.1-1-209-1996 precleaning和表面准备-第四版 PRECLEANING AND SURFACE PREPARATION - FOURTH EDITION
AWS B2.1-1-210-2001 大会和装夹-第四e ditiion ASSEMBLY AND FIXTURING - FOURTH EDITIION
AWS B2.1-1-211-2001 火焰钎焊-第四版 TORCH BRAZING - FOURTH EDITION
AWS B2.1-1-234-2006 指数-第四版 INDEX - FOURTH EDITION
AWS B2.1-1-235-2006 钎焊手册1991年第4版 BRAZING HANDBOOK 1991 FOURTH EDITION
AWS B2.1-4-220-1999 钎焊安全 BRAZE SAFETY
AWS B2.1-4-221-1999 建议的做法点焊铝及铝合金 RECOMMENDED PRACTICES FOR SPOT WELDING ALUMINIUM AND ALUMINIUM ALLOYS
AWS B2.1-5A-222-1999 建议的做法为电阻焊涂层低碳钢 RECOMMENDED PRACTICES FOR RESISTANCE WELDING COATED LOW CARBON STEELS
AWS B2.1-5A-224-1999 指南为保护钢与热喷涂涂层的铝和锌及其合金和复合材料-勘误表： 1 993 GUIDE FOR THE PROTECTION OF STEEL WITH THERMAL SPRAYED COATINGS OF ALUMINUM AND ZINC AND THEIR ALLOYS AND COMPOSITES - ERRATA:1993
AWS B2.1-5A-225-1999 建议的做法为金属铝和锌的保护钢铁 RECOMMENDED PRACTICES FOR METALLIZING WITH ALUMINIUM AND ZINC FOR PROTECTION OF IRON AND STEEL
AWS B2.1-5A-226-1999 标准评价方法的力量，钎焊接头-勘误表2 001年 STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS - ERRATA 2001
AWS B2.1-8-005-2004 氧气切割表面粗糙度计（塑料） -也见A WS的c 4.1设置和A WS的c 4.1-碳化钨 OXYGEN CUTTING SURFACE ROUGHNESS GAUGE (PLASTIC) - SEE ALSO AWS C4.1 SET AND AWS C4.1-WC
AWS B2.1-8-009-2002 氧气切割表面粗糙度的衡量和图表描述为准则，氧气减少表面-挂图和衡量-购买电话1 -800-854-7179美国/加拿大3 03-397-7956全球 OXYGEN CUTTING SURFACE ROUGHNESS GAUGE AND CHART FOR CRITERIA DESCRIBING OXYGEN CUT SURFACES - WALL CHART AND GAUGE-TO PURCHASE CALL 1-800-854-7179 USA/ CANADA 303-397-7956 WORLDWIDE
AWS B2.1-8-013-2002 标准描述氧气切割表面（ 8 1 / 2 “ × 11 ” 5 pg图） CRITERIA FOR DESCRIBING OXYGEN-CUT SURFACE (8 1/2“ X 11“ 5 PG CHART)
AWS B2.1-8-023-1994 统一指定系统oxyfuel喷嘴 UNIFORM DESIGNATION SYSTEM FOR OXYFUEL NOZZLES
AWS B2.1-8-024-2001 建议的做法等离子弧焊 RECOMMENDED PRACTICES FOR PLASMA-ARC WELDING
AWS B2.1-8-025-2001 建议的做法为螺柱焊-勘误表： 1 993 RECOMMENDED PRACTICES FOR STUD WELDING - ERRATA:1993
AWS B2.1-8-212-2001 表征电弧焊接烟尘 CHARACTERIZATION OF ARC WELDING FUME
AWS B2.1-8-213-1997 代码诊所为研究AWS的d1.1结构焊接代码-钢 CODE CLINIC FOR STUDY OF AWS D1.1 STRUCTURAL WELDING CODE - STEEL
AWS B2.1-8-214-2001 认证手册，供焊接督察-第四版;勘误表2 000年 CERTIFICATION MANUAL FOR WELDING INSPECTORS - FOURTH EDITION; ERRATA 2000
AWS B2.1-8-215-2001 额外资源 ADDITIONAL RESOURCES
AWS B2.1-8-216-2001 抽样形式 SAMPLE FORMS
AWS B5.14-2002 答案的关键检讨的问题，章1 -1 3 ANSWER KEY REVIEW QUESTIONS CHAPTERS 1 - 13
AWS B5.15-2003 焊接，钎焊，切削过程 WELDING, BRAZING, AND CUTTING PROCESSES
AWS B5.16-2006 焊缝和贱金属连续性 WELD AND BASE METAL DISCONTINUITIES
AWS B5.17-2004 焊接督察 WELDING INSPECTOR
AWS D14.2-1993 标准，包括行为守则和规格 STANDARDS, INCLUDING CODES AND SPECIFICATIONS
AWS F1.4-1997 焊缝几何形状和焊接术语 WELD GEOMETRY AND WELDING TERMINOLOGY
AWS A2.1-WC-1998 可焊性，焊接冶金，焊接化学 WELDABILITY, WELDING METALLURGY, AND WELDING CHEMISTRY
AWS A5-ALL-2003 无损检测 DESTRUCTIVE TESTING
AWS A6.0-1965 焊接，程序和焊工资格 WELDING, PROCEDURE AND WELDER QUALIFICATION
AWS API-IM-1999 内容; 2000年 CONTENTS; 2000
AWS ARE-10-2001 认证的焊接监手册的质量和生产率的提高 CERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENT
AWS ARE-11-2001 焊接在建筑施工-第八版;补编2 ： 1 968年9月 WELDING IN BUILDING CONSTRUCTION - EIGHTH EDITION; SUPPLEMENT 2: SEPTEMBER 1968
AWS ARE-12-2001 结构焊接代码-钢- 20版;纳入勘误表;勘误表： 2 0 06年3月3日 STRUCTURAL WELDING CODE - STEEL - 20TH EDITION; INCORPORATED ERRATA; ERRATA:3/3/2006
AWS ARE-4-2001 焊接结构钢代码捆绑设置; ，其中包括标准的焊接符号，条款和定义。鞍钢钢建筑结构，结构钢焊接的代码-一套包括以下内容： d 1.1/d1.1m： 2 004年， a 2.4： 1 998年， a 3.0： 2 001 STRUCTURAL WELDING CODE STEEL BUNDLED SET A; INCLUDING STANDARD WELDING SYMBOLS, TERMS, AND DEFINITIONS. AISC STEEL BUILDING STRUCTURES, STRUCTURAL WELDING CODE STEEL - SET INCLUDES THE FOLLOWING: D1.1/D1.1M: 2004, A2.4:1998, A3.0:2001
AWS ARE-5-2001 10.5所有;结构焊接代码捆绑的B组，包括结构焊接守则，钢铁，铝，钢板，钢筋，桥梁焊接及不锈钢。 -设定包括以下内容： d 1.1/d1.1m： 2 004年， d 1.2/d1.2m： 2 003年， d 1.3： 1 998年， d 1.4： 1 998年： D1-ALL; STRUCTURAL WELDING CODE BUNDLED SET B, INCLUDING STRUCTURAL WELDING CODES FOR STEEL, ALUMINUM, SHEET STEEL, REINFORCED STEEL, BRIDGE WELDING AND STAINLESS STEEL. - SET INCLUDES THE FOLLOWING: D1.1/D1.1M:2004, D1.2/D1.2M:2003, D1.3:1998, D1.4:1998:
AWS ARE-6-2001 焊接结构钢代码捆绑集C ;鞍钢的常规和复杂的钢建筑结构：包括标准的符号，焊接，钎焊和无损检测。 -设定包括以下内容： d 1.1/d1.1m： 2 004年和a 2.4： 1 988 STRUCTURAL WELDING CODE STEEL BUNDLED SET C; AISC CONVENTIONAL AND COMPLEX STEEL BUILDING STRUCTURES: INCLUDING STANDARD SYMBOLS FOR WELDING, BRAZING AND NONDESTRUCTIVE EXAMINATION. - SET INCLUDES THE FOLLOWING: D1.1/D1.1M:2004 AND A2.4:1988
AWS ARE-7-2001 官方的书d1.1的解释-集合的答复正式询问的要求， A WS的d 1.1（ 1 976年至1 998年） THE OFFICIAL BOOK OF D1.1 INTERPRETATIONS - A COLLECTION OF RESPONSES TO FORMAL INQUIRIES ABOUT THE REQUIREMENTS OF AWS D1.1 (1976-1998)
AWS ARE-8-2001 结构焊接铝代码捆绑E类;结构性铝，其中包括标准的符号，焊接，钎焊和无损检测;性病焊接术语和定义-设定包括以下内容： d 1.2/d1.2m： 2 003年， a 3.0： 2 001年和a 2.4 ： 1988 STRUCTURAL WELDING CODE ALUMINUM BUNDLED E; STRUCTURAL ALUMINUM INCLUDING STANDARD SYMBOLS FOR WELDING, BRAZING AND NONDESTRUCTIVE EXAMINATION; STD WELDING TERMS AND DEFINITIONS - SET INCLUDES THE FOLLOWING: D1.2/D1.2M:2003, A3.0:2001 AND A2.4:1988
AWS B2.1-1-205-1996 结构焊接代码-钢板 STRUCTURAL WELDING CODE - SHEET STEEL
AWS B2.1-1-232-2006 桥梁焊接代码-a ashto禁止生物武器公约- 4 ;勘误表： 2 002年 BRIDGE WELDING CODE - AASHTO BWC-4; ERRATA:2002
AWS B2.1-1-233-2006 桥梁焊接代码捆绑设置d ：鞍钢简单，主要钢桥; ，其中包括标准的符号，焊接，钎焊和非破坏性检验;桥焊接代码。 -设定包括以下内容： d 1.5m/d1.5： 2 002年和a 2.4： 1 988 BRIDGE WELDING CODE BUNDLED SET D: AISC SIMPLE AND MAJOR STEEL BRIDGES; INCLUDING STANDARD SYMBOLS FOR WELDING , BRAZING AND NON-DESTRUCTIVE EXAMINATION; BRIDGE WELDING CODE. - SET INCLUDES THE FOLLOWING: D1.5M/D1.5:2002 AND A2.4:1988
AWS B2.1-4-218-1999 建议的做法为焊接钢轨及有关铁路的组成部分使用的铁路车辆-勘误表： 0 7/2005 RECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS FOR USE BY RAIL VEHICLES - ERRATA: 07/2005
AWS B2.1-5A-223-1999 设计和规划手册，供具成本效益的焊接 DESIGN AND PLANNING MANUAL FOR COST-EFFECTIVE WELDING
AWS BRH-APP-A-1991 指南的培训和资格焊接人员入门级焊工 GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL ENTRY LEVEL WELDER
AWS BRH-APP-B-1991 指南的培训和资格焊接人员第二级-先进的焊机 GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL LEVEL II - ADVANCED WELDER
AWS BRH-APP-C-1991 指南的培训和资格焊接人员第三级-专家焊机 GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL LEVEL III - EXPERT WELDER
AWS BRH-CH-10-1991 eg2.0 - 95和qc10 - 95 EG2.0-95 AND QC10-95
AWS BRH-CH-11-1991 eg3.0 - 96和qc11 - 96 EG3.0-96 AND QC11-96
AWS BRH-CH-1-1991 eg4.0 - 96和qc12 - 96 EG4.0-96 AND QC12-96
AWS BRH-CH-12-1991 econo包： eg2.0 - 95 ， eg3.0 - 96 ， eg4.0 - 96 ， qc10 - 95 ， qc11 - 96 ， qc12 - 96 ECONO PACKAGE: EG2.0-95, EG3.0-96, EG4.0-96, QC10-95, QC11-96, QC12-96
AWS BRH-CH-13-1991 影响焊接对健康的x EFFECTS OF WELDING ON HEALTH X
AWS BRH-CH-14-1991 影响焊接对健康，喜 EFFECTS OF WELDING ON HEALTH, XI
AWS BRH-CH-15-1991 影响焊接对健康i EFFECTS OF WELDING ON HEALTH I
AWS BRH-CH-16-1991 影响焊接对健康，第十二章 EFFECTS OF WELDING ON HEALTH, XII
AWS BRH-CH-17-1991 影响焊接对健康的第二 EFFECTS OF WELDING ON HEALTH II
AWS BRH-CH-18-1991 影响焊接对健康的三 EFFECTS OF WELDING ON HEALTH III
AWS BRH-CH-19-2002 影响焊接对健康的四 EFFECTS OF WELDING ON HEALTH IV
AWS BRH-CH-20-1991 影响焊接对健康的v EFFECTS OF WELDING ON HEALTH V
AWS BRH-CH-21-1991 影响焊接对健康的六 EFFECTS OF WELDING ON HEALTH VI
AWS BRH-CH-2-1991 影响焊接对健康的第七 EFFECTS OF WELDING ON HEALTH VII
AWS BRH-CH-22-1991 影响焊接对健康的八 EFFECTS OF WELDING ON HEALTH VIII
AWS BRH-CH-23-1991 影响焊接对健康的第九 EFFECTS OF WELDING ON HEALTH IX
AWS BRH-CH-24-1991 影响焊接对健康-一套1 1书籍-包括印刷版指数 EFFECTS OF WELDING ON HEALTH - SET OF 11 BOOKS - INCLUDES HARDCOPY INDEX
AWS BRH-CH-25-1991 影响焊接对健康， indexi通过第十二 EFFECTS OF WELDING ON HEALTH, INDEXI THROUGH XII
AWS BRH-CH-26-1991 指南估算焊接排放量为EPA和通风许可证报告 GUIDE FOR ESTIMATING WELDING EMISSIONS FOR EPA AND VENTILATION PERMIT REPORTING
AWS BRH-CH-27-1991 推荐的安全实践，为电子束焊接与切割 RECOMMENDED SAFE PRACTICE FOR ELECTRON BEAM WELDING AND CUTTING
AWS BRH-CH-28-1991 指南焊接烟尘控制 GUIDE FOR WELDING FUME CONTROL
AWS BRH-CH-29-1991 高空掷物 FALLING OBJECTS
AWS BRH-CH-30-1991 密闭空间 CONFINED SPACES
AWS BRH-CH-31-1991 烟雾和气体 FUMES AND GASES
AWS BRH-CH-3-1991 接触镜片磨损 CONTACT LENS WEAR
AWS BRH-CH-32-1991 人机工程学在焊接环境 ERGONOMICS IN THE WELDING ENVIRONMENT
AWS BRH-CH-33-1991 图形符号为预防标签 GRAPHIC SYMBOLS FOR PRECAUTIONARY LABELS
AWS BRH-CH-4-1991 作风的指引，安全和卫生文件 STYLE GUIDELINES FOR SAFETY AND HEALTH DOCUMENTS
AWS BRH-CH-5-1991 心脏起搏器和焊接 PACEMAKERS AND WELDING
AWS BRH-CH-6-1991 电场和磁场（电磁场） ELECTRIC AND MAGNETIC FIELDS (EMF)
AWS BRH-CH-7-1991 锁定/ tagout LOCKOUT/TAGOUT
AWS BRH-CH-8-1991 激光焊接与切割安全 LASER WELDING AND CUTTING SAFETY
AWS BRH-CH-9-1991 热喷涂安全 THERMAL SPRAYING SAFETY
AWS BRH-INDEX-1991 辐射 RADIATION
AWS BRH-INTRO-2002 噪音 NOISE
AWS C1.2-1953 铬和镍在焊接烟尘 CHROMIUM AND NICKEL IN WELDING FUME
AWS C1.3-1970 电气危险 ELECTRICAL HAZARDS
AWS C2.2-1967 火警及爆炸预防 FIRE AND EXPLOSION PREVENTION
AWS C4.1G-2003 烧伤保护 BURN PROTECTION
AWS C4.1-WC-1977 机械危险 MECHANICAL HAZARDS
AWS CC-IM-1998 跳闸和下降 TRIPPING AND FALLING
AWS CM-ANNEX-A-2000 内容 CONTENTS
AWS CM-ANNEX-B-2000 表A1 （电极使用的第二部分） TABLE A1 (ELECTRODES USED IN PART II)
AWS CM-ANNEX-C-2000 表B1 ，以b43 （管状的数据油烟一代的特点，电极使用的第二部分） TABLES B1 TO B43 (TUBULAR DATA ON FUME GENERATION CHARACTERISTICS OF ELECTRODES USED IN PART II)
AWS CM-CH-10-2000 表中的C1至C4 （上简要的原始数据，第三部分） TABLES C1 TO C4 (SUMMARY OF ORIGINAL DATA, PART III)
AWS CM-CH-11-2000 表D1和D2 （实验室数据表为第四部分） TABLES D1 AND D2 (LABORATORY DATA SHEETS FOR PART IV)
AWS CM-CH-1-2000 表素E1 ，以中E6 （实验室数据表为第五部分） TABLES E1 TO E6 (LABORATORY DATA SHEETS FOR PART V)
AWS CM-CH-12-2000 通风系统的研究 VENTILATION STUDIES
AWS CM-CH-13-2000 电弧焊接烟雾和气体 ARC WELDING FUMES AND GASES
AWS CM-CH-2-2000 钎焊烟雾和气体 BRAZING FUMES AND GASES
AWS CM-CH-3-2000 热喷涂烟雾和气体 THERMAL SPRAYING FUMES AND GASES
AWS CM-CH-4-2000 烟雾和气体由氧气切割 FUMES AND GASES FROM OXYGEN CUTTING
AWS CM-CH-5-2000 钎料的比较图表 FILLER METAL COMPARISON CHARTS
AWS CM-CH-7-2000 钎料数据管理的CD - ROM FILLER METAL DATA MANAGER CD-ROM
AWS CM-CH-8-2000 钎料的比较图表和CD包 FILLER METAL COMPARISON CHARTS AND CD PACKAGE
AWS D1.0-1966 建议填料材料的焊接结构钢台图 SUGGESTED FILLER MATERIALS FOR WELDING STRUCTURAL STEEL DESK CHART
AWS D1.1/D1.1M-BUNDLE-A-2004 建议填料材料的焊接结构钢挂图 SUGGESTED FILLER MATERIALS FOR WELDING STRUCTURAL STEEL WALL CHART
AWS D1.1/D1.1M-BUNDLE-B-2004 建议填料材料的焊接结构钢，挂图和台图 SUGGESTED FILLER MATERIALS FOR WELDING STRUCTURAL STEEL, WALL CHART AND DESK CHART
AWS D1.1/D1.1M-BUNDLE-C-2004 焊接工艺规范（ WPS ）交易 WELDING PROCEDURE SPECIFICATION (WPS)
AWS D1.1-BI-2000 人口学会资格考试的纪录电渣焊和电 WPS QUALIFICATION TEST RECORD FOR ELECTROSLAG AND ELECTROGAS WELDING
AWS D1.2/D1.2M-BUNDLE-E-2004 焊机，焊接的经营者，或钉焊工资格考试的纪录 WELDER, WELDING OPERATOR, OR TACK WELDER QUALIFICATION TEST RECORD
AWS D1.5M/D1.5-BUNDLE-D-2004 报告X光检查焊缝 REPORT OF RADIOGRAPHIC EXAMINATION OF WELDS
AWS ELW-SET-2003 内容 CONTENTS
AWS ELW-SET-B-2003 设计手册，计算角焊缝尺寸 DESIGN HANDBOOK FOR CALCULATING FILLET WELD SIZES
AWS ELW-SET-C-2003 指南可焊性碳和低合金钢 GUIDE TO WELDABILITY CARBON AND LOW ALLOY STEELS
AWS ELW-SET-D-2003 指南设计了一个焊接工培训设施 GUIDE FOR THE DESIGN OF A WELDER TRAINING FACILITY
AWS EWH-10-1998 实际操作培训使用的测量工具为AWS的焊接认证检查员手中-关于考试 HANDS-ON TRAINING USE OF MEASURING TOOLS FOR THE AWS CERTIFIED WELDING INSPECTOR HANDS-ON EXAMINATION
AWS EWH-11-2001 手-对，自我训练，包括以下内容： AWS的b1.10 ， AWS的b1.11 ， AWS的viw - M和焊接督察- 工具包（ AWS的传统知识英寸） HANDS-ON, SELF TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR- TOOLKIT (AWS TK INCH)
AWS EWH-1-1979 手-对，自我训练，包括以下内容： AWS的b1.10 ， AWS的b1.11 ， AWS的viw - M和焊接督察- 工具包在公制（ AWS的传统知识公制） HANDS-ON, SELF-TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR- TOOLKIT IN THE METRIC (AWS TK METRIC)
AWS EWH-12-2003 国际钎焊和钎焊会议， 2月17日至19日， 2003年;四点喜来登酒店，圣地牙哥，加州 INTERNATIONAL BRAZING AND SOLDERING CONFERENCE, FEBRUARY 17-19, 2003; FOUR POINTS SHERATON HOTEL, SAN DIEGO, CALIFORNIA
AWS EWH-3-1983 国际指数的焊接钎料的分类 INTERNATIONAL INDEX OF WELDING FILLER METAL CLASSIFICATIONS
AWS EWH-4-1983 杰弗逊- 焊接百科全书-第十八版 JEFFERSON- WELDING ENCYCLOPEDIA - EIGHTEENTH EDITION
AWS EWH-5-1987 实验室验证臭氧采样与外溢证明impingers LABORATORY VALIDATION OF OZONE SAMPLING WITH SPILL-PROOF IMPINGERS
AWS EWH-6-1989 AWS的会员费（ 1年期订阅） 25 ％的折扣AWS的出版物-包括1里亚尔订阅焊接学报- 80元党费一时间， 12元的启动费，接收完整的成员包在6-8周后，订购 AWS MEMBERSHIP DUES (1-YEAR SUBSCRIPTION) 25% DISCOUNT ON AWS PUBLICATIONS- INCLUDES 1-YR SUBSCRIPTION TO THE WELDING JOURNAL- $80 DUES A ONE-TIME $12 INITIATION FEE- RECEIVE COMPLETE MEMBERSHIP PACKET IN 6-8 WEEKS AFTER ORDERING
AWS EWH-7-1990 oxyfuel气体焊接，切割和取暖安全 OXYFUEL GAS WELDING, CUTTING AND HEATING SAFETY
AWS EWH-8-1994 专业&apos; s顾问的程序，资格变数/交叉参考-表A WS的d 1.1， A WS的d 1.5， A WS的b 2.1，对A SME第九，和1 104年的空气污染指数 THE PROFESSIONAL&APOS;S ADVISOR ON PROCEDURE QUALIFICATION VARIABLES/CROSS REFERENCE - TABLES FOR AWS D1.1, AWS D1.5, AWS B2.1, ASME IX, AND API 1104
AWS EWH-9-1995 专业人士的顾问，弧焊电源及相关设备 THE PROFESSIONALS ADVISOR ON ARC WELDING POWER SOURCES AND RELATED EQUIPMENT
AWS EWH-ALL-2003 专业- 顾问，电阻焊 THE PROFESSIONAL- ADVISOR ON RESISTANCE WELDING
AWS EWH-I-2004 专业顾问，对焊接不锈钢 PROFESSIONAL- ADVISOR ON WELDING STAINLESS STEELS
AWS F2.1-1978 准备容器焊接或切割 PREPARING CONTAINERS FOR WELDING OR CUTTING
AWS F3.1-1989 每天袖珍手册电弧焊接钢 EVERYDAY POCKET HANDBOOK FOR ARC WELDING STEEL
AWS FACT-SHEET-NO.-10-1995 日常袖珍手册目视检查及焊缝不连续性 THE EVERYDAY POCKET HANDBOOK FOR VISUAL INSPECTION AND WELD DISCONTINUITIES
AWS FACT-SHEET-NO.-11-1995 日常袖珍手册，焊接接头的细节结构的应用 THE EVERYDAY POCKET HANDBOOK ON WELDED JOINT DETAILS FOR STRUCTURAL APPLICATIONS
AWS FACT-SHEET-NO.-1-1995 每天袖珍手册气体金属弧焊和药芯焊丝电弧焊 EVERYDAY POCKET HANDBOOK FOR GAS METAL ARC AND FLUX CORED ARC WELDING
AWS FACT-SHEET-NO.-12-1995 每天袖珍手册，公制的做法，为焊接行业 EVERYDAY POCKET HANDBOOK ON METRIC PRACTICES FOR THE WELDING INDUSTRY
AWS FACT-SHEET-NO.-13-1995 日常袖珍手册目视检查AWS的d1.1结构焊接代号 fabtication和焊接的要求 THE EVERYDAY POCKET HANDBOOK FOR VISUAL INSPECTION OF AWS D1.1 STRUCTURAL WELDING CODE- FABTICATION AND WELDING REQUIREMENTS
AWS FACT-SHEET-NO.-14-1995 每天袖珍手册屏蔽金属弧焊 EVERYDAY POCKET HANDBOOK FOR SHIELDED METAL ARC WELDING
AWS FACT-SHEET-NO.-15-1995 每天袖珍手册气体金属弧焊（的GMAW ）铝 EVERYDAY POCKET HANDBOOK FOR GAS METAL ARC WELDING (GMAW) OF ALUMINUM
AWS FACT-SHEET-NO.-16-1997 suggester填充材料和最低预热温度焊接钢管壁厚不少于3 / 4 “ ，墙和台图表 SUGGESTER FILLER MATERIALS AND MINIMUM PREHEAT TEMPERATURES FOR WELDING STEEL PIPE WITH WALL THICKNESS LESS THAN 3/4“, WALL AND DESK CHARTS
AWS FACT-SHEET-NO.-17-1996 建议pretemperatures焊接结构钢materails墙和台图表 SUGGESTED PRETEMPERATURES FOR WELDING STRUCTURAL STEEL MATERAILS WALL AND DESK CHARTS
AWS FACT-SHEET-NO.-18-1997 实际参考指南射线检验-验收标准 THE PRACTICAL REFERENCE GUIDE FOR RADIOGRAPHIC INSPECTION - ACCEPTANCE CRITERIA
AWS FACT-SHEET-NO.-19-1998 实际参考指南腐蚀的焊缝-成因及对策 THE PRACTICAL REFERENCE GUIDE FOR CORROSION OF WELDS - CAUSES AND CURES
AWS FACT-SHEET-NO.-20-1997 实际参考指南堆焊 THE PRACTICAL REFERENCE GUIDE FOR HARDFACING
AWS FACT-SHEET-NO.-2-1997 实际参考指南焊接铝高品质的熔焊 THE PRACTICAL REFERENCE GUIDE FOR WELDING ALUMINUM HIGH-QUALITY FUSION WELDING
AWS FACT-SHEET-NO.-3-1995 实际参考指南焊接钛 THE PRACTICAL REFERENCE GUIDE FOR WELDING TITANIUM
AWS FACT-SHEET-NO.-4-1995 实际参考指南焊接检查管理-目视检查压力容器压力管道 THE PRACTICAL REFERENCE GUIDE FOR WELDING INSPECTION MANAGEMENT - VISUAL INSPECTION OF PRESSURE VESSELS AND PRESSURE PIPING
AWS FACT-SHEET-NO.-5-1997 实际参考指南焊接铝的商业应用 THE PRACTICAL REFERENCE GUIDE FOR WELDING ALUMINUM COMMERCIAL APPLICATIONS
AWS FACT-SHEET-NO.-6-1995 实际的参考指南，以焊接冶金-关键概念，为焊接 THE PRACTICAL REFERENCE GUIDE TO WELDING METALLURGY - KEY CONCEPTS FOR WELDABILITY
AWS FACT-SHEET-NO.-7-1995 实际焊接工程师 THE PRACTICAL WELDING ENGINEER
AWS FGW-APP-D-1979 规格的资格和注册的一级ientry焊工 SPECIFICATION FOR QUALIFICATION AND REGISTRATION OF LEVEL IENTRY WELDERS
AWS FGW-APP-E-1979 规格资格和认证为二级-高级焊工 SPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL II - ADVANCED WELDERS
AWS FGW-PT-1-1979 规格资格和认证为第三级-专家焊工 SPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL III - EXPERT WELDERS
AWS FGW-PT-2-1979 标准的认证测试设施， AWS的认证程序焊机 STANDARD FOR ACCREDITATION OF TEST FACILITIES FOR AWS CERTIFIED WELDER PROGRAM
AWS FGW-PT-3-1979 标准认证的焊接教育工作者 STANDARD FOR CERTIFICATION OF WELDING EDUCATORS
AWS FGW-PT-4-1979 标准AWS的认证焊工 STANDARD FOR AWS CERTIFIED WELDERS
AWS FGW-PT-5-1979 电弧焊接安全（安全的香格里拉soldadura每间房标Arco ）在西班牙语 ARC WELDING SAFETY (SEGURIDAD EN LA SOLDADURA POR ARCO) IN SPANISH
AWS FMDM-2003 独立店s指南焊接的安全和健康 THE INDEPENDENT SHOP S GUIDE TO WELDING SAFETY AND HEALTH
AWS FMPK-2003 焊接手册-第三版 SOLDERING HANDBOOK - THIRD EDITION
AWS FMS-D-1996 附件一 ANNEX A
AWS FMS-W-1996 附件B ANNEX B
AWS FMS-WC-&-DC-1996 附件C ANNEX C
AWS FORM-E-1-2003 附件D ANNEX D
AWS FORM-E-3-2003 附件E ANNEX E
AWS FORM-E-4-2003 基本焊接技术 FUNDAMENTALS OF SOLDERING TECHNOLOGY
AWS FORM-E-7-2003 焊料材料 SOLDERS MATERIALS
AWS FORM-E-8-2003 基板材料 SUBSTRATE MATERIALS
AWS FORM-E-9-2003 通量 FLUXES
AWS FSW-1992 钎料浆 SOLDER PASTES
AWS FUMES-AND-GASES-1979 大会进程 ASSEMBLY PROCESSES
AWS HOT-1987 检验技术产品的接受和工艺优化 INSPECTION TECHNIQUES FOR PRODUCT ACCEPTANCE AND PROCESS OPTIMIZATION
AWS HST-INCH-2005 环境，安全，健康和 ENVIRONMENTAL, SAFETY, AND HEALTH
AWS HST-METRIC-2005 指数焊接手册 INDEX TO SOLDERING HANDBOOK
AWS IFS-02-2002 焊接手册 SOLDERING HANDBOOK
AWS MEMBERSHIP-2005 安全和健康的实况报道-第三版 SAFETY AND HEALTH FACT SHEETS - THIRD EDITION
AWS S-1988 紫外线反射涂料 ULTRAVIOLET REFLECTANCE OF PAINT
AWS SHB-ANNEX-A-1999 AWS的超声波统治者和引导设置 AWS ULTRASONIC RULERS AND GUIDE SET
AWS SHB-ANNEX-B-1999 目视检查工场导师手册 VISUAL INSPECTION WORKSHOP INSTRUCTORS MANUAL
AWS SHB-ANNEX-C-1999 目视检查讲习班参考手册 VISUAL INSPECTION WORKSHOP REFERENCE MANUAL
AWS SHB-CH-4-1999 焊接铸铁-选择文件 WELDING OF CAST IRON - A SELECTION OF PAPERS
AWS SHB-CH-5-1999 焊接烟尘控制，示范项目1982年 WELDING FUME CONTROL, A DEMONSTRATION PROJECT 1982
AWS SHB-CH-6-1999 焊接科学和技术I卷-第九版 WELDING SCIENCE AND TECHNOLOGY VOLUME I - NINTH EDITION
AWS SHB-CH-7-1999 术语和定义 TERMS AND DEFINITIONS
AWS SHB-CH-8-1999 公制实践指南，为焊接行业 METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY
AWS SHB-INDEX-1999 监测和控制焊接及加入过程 MONITORING AND CONTROL OF WELDING AND JOINING PROCESS
AWS SHB-INTRO-1999 机械化，自动化，机器人焊接 MECHANIZED, AUTOMATED, AND ROBOTIC WELDING
AWS URS-1998 统计调查结果显示，加入，切割，和专职进程 SURVEY OF JOINING, CUTTING, AND ALLIED PROCESSES
AWS VIW-IM-1998 经济学焊接与切割 ECONOMICS OF WELDING AND CUTTING
AWS WCI-1985 焊缝质量 WELD QUALITY
AWS WFDP-1982 焊接检查和无损检测 WELDING INSPECTION AND NONDESTRUCTIVE EXAMINATION
AWS WHB-1-2001 资格和认证 QUALIFICATION AND CERTIFICATION
AWS WHB-1-APP-A-2001 守则和其他标准 CODES AND OTHER STANDARDS
AWS WHB-1-APP-B-2001 安全守则 SAFE PRACTICES
AWS WHB-1-CH-10-2001 物理焊接与切割 PHYSICS OF WELDING AND CUTTING
AWS WHB-1-CH-11-2001 热流在焊接 HEAT FLOW IN WELDING
AWS WHB-1-CH-1-2001 焊接冶金 WELDING METALLURGY
AWS WHB-1-CH-12-2001 设计焊接 DESIGN FOR WELDING
AWS WHB-1-CH-13-2001 试验评价方法的焊接接头 TEST METHODS FOR EVALUATING WELDED JOINTS
AWS WHB-1-CH-14-2001 残余应力和变形 RESIDUAL STRESS AND DISTORTION
AWS WHB-1-CH-15-2001 符号的加入和检查 SYMBOLS FOR JOINING AND INSPECTION
AWS WHB-1-CH-16-2001 焊件模具和定位 WELDMENT TOOLING AND POSITIONING
AWS WHB-1-CH-17-2001 焊接科学和技术I卷-第九版 WELDING SCIENCE AND TECHNOLOGY VOLUME I - NINTH EDITION
AWS WHB-1-CH-2-2001 指数的重大课题 INDEX OF MAJOR SUBJECTS
AWS WHB-1-CH-3-2001 指数 INDEX
AWS WHB-1-CH-4-2001 焊接手册第2卷-焊接工艺-西班牙语-第八版 WELDING HANDBOOK VOLUME 2 - WELDING PROCESSES - SPANISH - EIGHTH EDITION
AWS WHB-1-CH-5-2001 焊接手册第2卷焊接工艺，第1部分-第九版 WELDING HANDBOOK VOLUME 2 WELDING PROCESSES, PART 1 - NINTH EDITION
AWS WHB-1-CH-6-2001 材料研究和应用-第1部分 MATERIALS AND APPLICATIONS - PART 1
AWS WHB-1-CH-7-2001 水下焊接与切割 UNDERWATER WELDING AND CUTTING
AWS WHB-1-CH-8-2001 铝及铝合金 ALUMINUM AND ALUMINUM ALLOYS
AWS WHB-1-CH-9-2001 镁及镁合金 MAGNESIUM AND MAGNESIUM ALLOYS
AWS WHB-1-HDBK-2001 铜及铜合金 COPPER AND COPPER ALLOYS
AWS WHB-1-IMS-2001 镍和钴合金 NICKEL AND COBALT ALLOYS
AWS WHB-1-INDEX-2001 铅和锌 LEAD AND ZINC
AWS WHB-2-HDBK-2004 塑料 PLASTICS
AWS WHB-3-1996 复合材料 COMPOSITES
AWS WHB-3-CH-10-1996 陶瓷 CERAMICS
AWS WHB-3-CH-1-1996 保养和维修焊接 MAINTENANCE AND REPAIR WELDING
AWS WHB-3-CH-2-1969 材料研究和应用-第1部分 MATERIALS AND APPLICATIONS - PART 1
AWS WHB-3-CH-3-1969 指数 INDEX
AWS WHB-3-CH-4-1996 金属及其焊接性 METALS AND THEIR WELDABILITY
AWS WHB-3-CH-5-1996 钛，锆，铪，钽，和columbium TITANIUM, ZIRCONIUM, HAFNIUM, TANTALUM, AND COLUMBIUM
AWS WHB-3-CH-6-1969 其他金属 OTHER METALS
AWS WHB-3-CH-7-1969 碳和低合金钢 CARBON AND LOW ALLOY STEELS
AWS WHB-3-CH-8-1996 异种金属 DISSIMILAR METALS
AWS WHB-3-CH-9-1969 不锈钢 STAINLESS STEELS
AWS WHB-3-HDBK-1996 工具和模具钢 TOOL AND DIE STEELS
AWS WHB-3-INDEX-1969 高合金钢 HIGH ALLOY STEELS
AWS WHB-4-1982 铸铁 CAST IRONS
AWS WHB-4-CH-10-1982 镍和钴合金 NICKEL AND COBALT ALLOYS
AWS WHB-4-CH-11-1969 铜合金 COPPER ALLOYS
AWS WHB-4-CH-1-1969 铝合金 ALUMINUM ALLOYS
AWS WHB-4-CH-12-1982 镁合金 MAGNESIUM ALLOYS
AWS WHB-4-CH-2-1982 金属及其焊接性 METALS AND THEIR WELDABILITY
AWS WHB-4-CH-3-1969 指数 INDEX
AWS WHB-4-CH-4-1982 材料研究和应用-第2部分-第八版 MATERIALS AND APPLICATIONS - PART 2 - EIGHTH EDITION
AWS WHB-4-CH-5-1969 难治性反应，和贵重金属和合金 REACTIVE REFRACTORY, AND PRECIOUS METALS AND ALLOYS
AWS WHB-4-CH-6-1982 碳和低合金钢 CARBON AND LOW-ALLOY STEELS
AWS WHB-4-CH-7-1969 高合金钢 HIGH-ALLOY STEELS
AWS WHB-4-CH-8-1982 钢板 COATED STEELS
AWS WHB-4-CH-9-1969 工具和模具钢 TOOL AND DIE STEELS
AWS WHB-4-HDBK-1982 不锈钢和耐热钢 STAINLESS AND HEAT-RESISTING STEELS
AWS WHB-4-INDEX-1982 包层和异种金属 CLAD AND DISSIMILAR METALS
AWS WHB-4-PART-2-1998 堆焊 SURFACING
AWS WHB-4-PART-2-CH-10-1998 铸铁 CAST IRONS
AWS WHB-4-PART-2-CH-1-1998 钛及钛合金 TITANIUM AND TITANIUM ALLOYS
AWS WHB-4-PART-2-CH-2-1998 材料研究和应用-第2部分-第八版 MATERIALS AND APPLICATIONS - PART 2 - EIGHTH EDITION
AWS WHB-4-PART-2-CH-3-1998 焊接手册指数的重大课题 WELDING HANDBOOK INDEX OF MAJOR SUBJECTS
AWS WHB-4-PART-2-CH-4-1998 工程，成本，质量和安全 ENGINEERING, COSTS, QUALITY, AND SAFETY
AWS WHB-4-PART-2-CH-5-1998 安全守则 SAFE PRACTICES
AWS WHB-4-PART-2-CH-6-1998 设计焊接 DESIGN FOR WELDING
AWS WHB-4-PART-2-CH-7-1998 符号，焊接，钎焊，无损检测 SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION
AWS WHB-4-PART-2-CH-8-1998 经济学和成本估算 ECONOMICS AND COST ESTIMATING
AWS WHB-4-PART-2-CH-9-1998 固定装置和定位 FIXTURES AND POSITIONERS
AWS WHB-4-PART-2-HDBK-1998 自动化和控制 AUTOMATION AND CONTROL
AWS WHB-4-PART-2-INDEX-1998 守则和标准 CODES AND STANDARDS
AWS WHB-5-1984 资格和认证 QUALIFICATION AND CERTIFICATION
AWS WHB-5-CH-10-1969 焊缝质量 WELD QUALITY
AWS WHB-5-CH-1-1984 检查 INSPECTION
AWS WHB-5-CH-2-1969 工程，成本，质量和安全 ENGINEERING, COSTS, QUALITY, AND SAFETY
AWS WHB-5-CH-3-1969 指数 INDEX
AWS WHB-5-CH-4-1984 焊接手册设置-包括卷第1至第4 WELDING HANDBOOK SET - INCLUDES VOLUMES 1 THROUGH 4
AWS WHB-5-CH-5-1984 焊接检查手册-第三版 WELDING INSPECTION HANDBOOK - THIRD EDITION
AWS WHB-5-CH-6-1969 资格的焊接工艺规格 QUALIFICATION OF WELDING PROCEDURE SPECIFICATIONS
AWS WHB-5-CH-7-1984 资格的焊工和焊接操作 QUALIFICATION OF WELDERS AND WELDING OPERATORS
AWS WHB-5-CH-8-1969 应用和范围 APPLICATION AND SCOPE
AWS WHB-5-CH-9-1984 电脑焊接检查和质量 COMPUTERIZATION OF WELDING INSPECTION AND QUALITY
AWS WHB-5-HDBK-1984 无损检测焊缝 DESTRUCTIVE TESTING OF WELDS
AWS WHB-5-INDEX-1969 验证测试 PROOF TESTS
AWS WHB-ALL-2003 无损检测方法 NONDESTRUCTIVE EXAMINATION METHODS
AWS WI-CH-10-2000 资格的无损检测人员 QUALIFICATION OF NONDESTRUCTIVE EXAMINATION PERSONNEL
AWS WI-CH-11-2000 守则和其他标准 CODES AND OTHER STANDARDS
AWS WI-CH-1-2000 公制实践 METRIC PRACTICE
AWS WI-CH-12-2000 符号 SYMBOLS
AWS WI-CH-13-2000 要求焊接督察 REQUIREMENTS FOR THE WELDING INSPECTOR
AWS WI-CH-14-2000 焊接检查行动 WELDING INSPECTION OPERATIONS
AWS WI-CH-15-2000 检查安全方面的考虑 INSPECTION SAFETY CONSIDERATIONS
AWS WI-CH-16-2000 质量保证 QUALITY ASSURANCE
AWS WI-CH-17-2000 有色金属焊接冶金 FERROUS WELDING METALLURGY
AWS WI-CH-18-2000 预热和postweld热处理 PREHEATING AND POSTWELD HEAT TREATING
AWS WI-CH-2-2000 焊缝和焊接相关的连续性 WELD AND WELD RELATED DISCONTINUITIES
AWS WI-CH-3-2000 指数在焊接检查 INDEX TO WELDING INSPECTION
AWS WI-CH-4-2000 焊接检查手册-第三版 WELDING INSPECTION HANDBOOK - THIRD EDITION
AWS WI-CH-5-2000 焊接检测技术-第四版;勘误表： 2 000年 WELDING INSPECTION TECHNOLOGY - FOURTH EDITION; ERRATA:2000
AWS WI-CH-6-2000 焊接检测技术wookbook -第三版 WELDING INSPECTION TECHNOLOGY WOOKBOOK - THIRD EDITION
AWS WI-CH-7-2000 联合-焊缝的术语和标准的焊接符号的解释 JOINT - WELD TERMINOLOGY AND STANDARD WELDING SYMBOLS INTERPRETATION
AWS WI-CH-8-2000 焊接冶金I卷，基本面-第四版;第1卷 WELDING METALLURGY VOLUME I, FUNDAMENTALS - FOURTH EDITION; VOLUME 1
AWS WI-CH-9-2000 weldperfect ：简便指南以完美的焊接 WELDPERFECT: EASY GUIDE TO PERFECT WELDING
AWS WI-INDEX-2000 焊接工艺和做法 WELDING PROCESSES AND PRACTICES
AWS WI-TABLE-OF-CONTENTS-2000 焊接工艺和做法簿 WELDING PROCESSES AND PRACTICES WORKBOOK
AWS WJT-G-1995 焊接质量保证的指引，装配 WELDING QUALITY ASSURANCE GUIDELINE FOR FABRICATORS
AWS WPP-1998 焊接镀锌钢板-第1版 WELDING ZINC-COATED STEEL - FIRST EDITION
AWS WPP-W-1998 弧焊安全 ARC WELDING SAFETY
AWS B2.1-22-015-2002
AWS B2.1-4-217-1999
AWS B2.1-4-219-1999
AWS A2.4/A2.1-SET-1998
AWS CM-CH-6-2000
AWS CM-CH-9-2000
AWS CM-INTRO-2000
AWS EWH-2-1981
AWS FACT-SHEET-NO.-8-1995
AWS FACT-SHEET-NO.-9-1995
AWS FGW-1969
AWS FGW-APP-A-1979
AWS FGW-APP-B-1979
AWS FGW-APP-C-1979
AWS SHB-ANNEX-D-1999
AWS SHB-ANNEX-E-1999
AWS SHB-CH-1-1999
AWS SHB-CH-2-1999
AWS SHB-CH-3-1999
AWS WHB-4-PART-2-CH-5-1998 不锈钢和耐热钢 STAINLESS AND HEAT-RESISTING STEELS
AWS WHB-4-PART-2-CH-7-1998 堆焊 SURFACING
AWS WHB-5-CH-1-1984 设计焊接 DESIGN FOR WELDING
AWS WHB-5-CH-2-1969 符号，焊接，钎焊，无损检测 SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION
AWS WHB-5-CH-9-1984 检查 INSPECTION
AWS WI-CH-15-2000 无损检测方法 NONDESTRUCTIVE EXAMINATION METHODS
AWS WI-CH-18-2000 公制实践 METRIC PRACTICE
AWS WI-CH-3-2000 要求焊接督察 REQUIREMENTS FOR THE WELDING INSPECTOR
AWS WI-CH-5-2000 检查安全方面的考虑 INSPECTION SAFETY CONSIDERATIONS
AWS WI-CH-6-2000 质量保证 QUALITY ASSURANCE
AWS WI-CH-8-2000 预热和postweld热处理 PREHEATING AND POSTWELD HEAT TREATING
AWS WI-CH-9-2000 焊缝和焊接相关的连续性 WELD AND WELD RELATED DISCONTINUITIES
AWS WI-INDEX-2000 指数在焊接检查 INDEX TO WELDING INSPECTION
AWS WI-TABLE-OF-CONTENTS-2000 焊接检查手册-第三版 WELDING INSPECTION HANDBOOK - THIRD EDITION
AWS WIT-T-2000 焊接检测技术-第四版;勘误表： 2 000年 WELDING INSPECTION TECHNOLOGY - FOURTH EDITION; ERRATA:2000
AWS WIT-W-99-1999 焊接检测技术wookbook -第三版 WELDING INSPECTION TECHNOLOGY WOOKBOOK - THIRD EDITION
AWS WJT-G-1995 联合-焊缝的术语和标准的焊接符号的解释 JOINT - WELD TERMINOLOGY AND STANDARD WELDING SYMBOLS INTERPRETATION
AWS WPP-W-1998 焊接工艺和做法簿 WELDING PROCESSES AND PRACTICES WORKBOOK

〉〉〉〉〉〉点击索取〈〈〈〈〈〈
 


版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点