〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
QPL-3644-1
SHAFT, FLEXIBLE, TUNING
AGMA9000 弹性联轴器-潜在的不平衡分类（无s / s的文件） FLEXIBLE COUPLINGS - POTENTIAL UNBALANCE
CLASSIFICATION (NO S/S DOCUMENT)
ABMA16.1 AIRFRAME BALL, ROLLER AND NEEDLE ROLLER BEARINGS, METRIC DESIGN
(NO S/S DOCUMENT)
ABMA16.2 AIRFRAME BALL, ROLLER AND NEEDLE ROLLER BEARINGS, INCH DESIGN
(NO S/S DOCUMENT)
AN200 BEARING, BALL, HEAVY DUTY, ANTI-FRICTION, AIRFRAME (USE MS20200
FOR KP SERIES, MS27261 FOR KS SERIES)
AN201 REV 5 BEARING, BALL, INTERMEDIATE DUTY, ANTI&FRICTION, AIRFRAME
AN202 REV 5 BEARING, BALL, EXTRA LIGHT DUTY, ANTI&FRICTION, AIRFRAME
(S/S BY MS&20202)
AN203 REV 1 BEARING-INTERMEDIATE DUTY BALL (DEEP GROOVE, COMPOSITION SEAL)
(USE MS 20201)
AN204 REV 1 BEARING-HEAVY DUTY BALL (DEEP GROOVE, FELT SEAL) (SEE MS 20200)
AN205 REV 1 BEARING-HEAVY DUTY DOUBLE ROW BALL (DEEP GROVE, COMPOSITION
SEAL) (SEE MS 20207)
AN206 REV 5 BEARING, BALL, DOUBLE ROW, SELF-ALIGNING, HEAVY DUTY (S/S
BY MS20206)
AN207 REV 4 BEARING, BALL, DOUBLE ROW, HEAVY DUTY, ANTI-FRICTION, AIRFRAME
(S/S BY MS20207)
AN208 REV 1 BEARING, HEAVY DUTY DOUBLE ROW BALL (FELT SEAL) (USE MS 27644)
AN209 REV 1 BEARING-INTERMEDIATE DUTY BALL (DEEP GROOVE, FELT SEAL) (SEE
MS 20201)
AN210 REV 4 PULLEY & ANTI&FRICTION BEARING CONTROL (USE AN219,
AN220 AND AN221)
AN212 REV 1 BEARING - HEAVY DUTY BALL (DEEP GROOVE, COMPOSITION SEAL)
AN213 REV 2 BEARING-EXTRA HEAVY DUTY BALL (DEEP GROOVE, COMPOSITION SEAL)
(DEE MS 20207)
AN215 REV 1 BEARING&BELLCRANK
AN216 BALL, METAL
AN218 REV 3 BEARING - BALL, BELLCRANK, ANTI-FRICTION, AIRFRAME (USE MS20218)
AN7503 WASHER-WHEEL BEARING RETAINING-USE MS21258
AN946 REV 2 BEARING, BALL, ROD END, EXTERNAL THD, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME (USE MS-21151)
AN948 REV 2 BEARING, BALL, ROD END, HOLLOW SHANK, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME (USE MS-21152)
AN949 BEARING, ROD END, HOLLOW SHANK, SELF ALIGNING, PLAIN, AIRFRAME
AN950 REV 2 NOT 1 WASHER - BALL SOCKET (NO S/S DOCUMENT)
AN951 BEARING, BALL, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME (MS-21153)
AN955 REV 2 WASHER&BALL SET
DOD-B-82737 SUP 1 NOT 4 BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE
IN BEARINGS, VALVES AND BEARING APPLICATIONS), GENERAL SPECIFICATION FOR
(NO S/S DOCUMENT)
DOD-B-82737/1 NOT 4 BALLS, BEARING, AIRCRAFT QUALITY STEEL, METRIC (NO
S/S DOCUMENT)
DOD-B-82737/2 NOT 4 BALLS, BEARING, STEEL, CHROME ALLOY, METRIC (NO S/S
DOCUMENT)
DOD-B-82737/3 NOT 4 BALLS, BEARING, CORROSION RESISTANT STEEL, METRIC
(NO S/S DOCUMENT)
DOD-B-82737/4 NOT 4 BALLS, BEARING, STEEL, CARBON, METRIC (NO S/S DOCUMENT)
DOD-B-82737/5 NOT 4 BALLS, BEARING, BRONZE, METRIC (NO S/S DOCUMENT)
DOD-B-82737/6 NOT 4 BALLS, BEARING, NICKEL-COPPER ALLOY (K-MONEL) METRIC
(NO S/S DOCUMENT)
DS3225 NOT 3 BEARING, ROLLER, TAPERED, SINGLE ROW OF ROLLERS (METRIC SERIES)
(S/S BY ASTM-F2591)
FF-B-171/1(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 10, 02, 03 UNDER 10 MM BORE, METRIC
(S/S BY A-A-59581)
FF-B-171/10(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG, ANSI/AFBMA DIMENSION SERIES
33 (S/S BY A-A-59596)
FF-B-171/11(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL
SELF-ALIGNING, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59597)
FF-B-171/12(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL
SELF-ALIGNING, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59598)
FF-B-171/13(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL
SELF-ALIGNING, ANSI/AFBMA DIMENSION SERIES 22 (S/S BY A-A-59599)
FF-B-171/14(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, RADIAL, INTERNAL
SELF-ALIGNING, ANSI/AFBMA DIMENSION SERIES 23 (S/S BY A-A-59600)
FF-B-171/15(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, PRIMARILY RADIAL,
COUNTERBORED OUTER RING, CONTACT ANGLE UP TO AND INCLUDING 10 DEG., NON-SEPARABLE,
ANSI/AFBMA DIMENSION SERIES 19 (NO S/S DOCUMENT)
FF-B-171/16(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, PRIMARILY RADIAL,
COUNTERBORED OUTER RING, CONTACT ANGLE UP TO AND INCLUDING 10 DEG., NON-SEPARABLE,
ANSI/AFBMA DIMENSION SERIES 10 (NO S/S DOCUMENT)
FF-B-171/17(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, PRIMARILY RADIAL,
COUNTERBORED OUTER RING, CONTACT ANGLE UP TO AND INCLUDING 10 DEG., NON-SEPARABLE,
ANSI/AFBMA DIMENSION SERIES 02 (NO S/S DOCUMENT)
FF-B-171/18(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, PRIMARILY RADIAL,
COUNTERBORED OUTER RING, CONTACT ANGLE UP TO AND INCLUDING 10 DEG., NON-SEPARABLE,
ANSI/AFBMA DIMENSION SERIES 03 (NO S/S DOCUMENT)
FF-B-171/19(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 10 DEG., UP TO AND INCLUDING
22 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 19 (S/S BY A-A-59623)
FF-B-171/2(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 19 (S/S BY A-A-59582)
FF-B-171/20(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 10 DEG. UP TO AND INCLUDING
22 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 10 (S/S BY A-A-59624)
FF-B-171/21(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 10 DEG. UP TO AND INCLUDING
22 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59625)
FF-B-171/22(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 10 DEG. UP TO AND INCLUDING
22 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59626)
FF-B-171/23(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 10 DEG. UP TO AND INCLUDING
22 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59627)
FF-B-171/24(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 22 DEG. UP TO AND INCLUDING
32 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 10 (S/S BY A-A-59628)
FF-B-171/25(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 22 DEG. UP TO AND INCLUDING
32 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59629)
FF-B-171/26(2) NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 22 DEG. UP TO AND INCLUDING
32 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59630)
FF-B-171/27(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 22 DEG. UP TO AND INCLUDING
32 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59631)
FF-B-171/28(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 32 DEG. UP TO AND INCLUDING
45 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 10 (S/S BY A-A-59632)
FF-B-171/29(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 32 DEG. UP TO AND INCLUDING
45 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59633)
FF-B-171/3(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 10 (S/S BY A-A-59583)
FF-B-171/30(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 32 DEG. UP TO AND INCLUDING
45 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59634)
FF-B-171/31(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
COUNTERBORED OUTER RING, CONTACT ANGLE ABOVE 32 DEG. UP TO AND INCLUDING
45 DEG., NON-SEPARABLE, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59635)
FF-B-171/32(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA
DIMENSION SERIES 32 (S/S BY A-A-59636)
FF-B-171/33(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
NON-FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA
DIMENSION SERIES 33 (S/S BY A-A-59637)
FF-B-171/34(3) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
NON-FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE BEARING, ANSI/AFBMA
DIMENSION SERIES 32 (S/S BY A-A-59638)
FF-B-171/35(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE BEARING, ANSI/AFBMA DIMENSION
SERIES 33 (S/S BY A-A-59639)
FF-B-171/36(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION
SERIES 32 (S/S BY A-A-59640)
FF-B-171/37(2) NOT 1 BEARING, BALL, ANNULAR, DOUBLE ROW, ANGULAR CONTACT,
FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE BEARING, ANSI/AFBMA DIMENSION
SERIES 33 (S/S BY A-A-59641)
FF-B-171/4(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59584)
FF-B-171/4(I3) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/ABMA DIMENSION 02 (S/S BY A-A-59584)
FF-B-171/5(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59585)
FF-B-171/5(I3) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/ABMA DIMENSION SERIES 03 (S/S BY A-A-59585)
FF-B-171/6(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 04 (S/S BY A-A-59586)
FF-B-171/7(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 02 (S/S BY A-A-59587)
FF-B-171/8(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, FILLING
SLOT, ANSI/AFBMA DIMENSION SERIES 03 (S/S BY A-A-59589)
FF-B-171/9(2) NOT 1 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL NON-FILLING
SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG, ANSI/AFBMA DIMENSION SERIES
32 (S/S BY A-A-59595)
FF-B-171B(1) SUP 1 NOT 1 BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC
(NO S/S DOCUMENT)
FF-B-185(4) NOT 2 BEARINGS, ROLLER, CYLINDRICAL; AND BEARINGS, ROLLER,
SELF-ALIGNING (S/S BY A-A-55598, A-A-55599, A-A-55600, A-A-55601 AND A-A-55602)
FF-B-187/1 NOT 1 BEARING, ROLLER, TAPERED, SINGLE ROW, NORMAL ANGLE (TYPE
TS) (S/S BY A-A-59649)
FF-B-187/10 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE,
TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR
LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROVE (TYPE TNASW)
(S/S BY A-A-59658)
FF-B-187/11 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE,
TWO SINGLE CONES, CONE BACK FACE RIB GROUND ON THE OUTER DIAMETER FOR
SEALING PURPOSES, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE
TNASWE) (S/S BY A-A-59659)
FF-B-187/2 NOT 1 BEARING, ROLLER, TAPERED, SINGLE ROW, NORMAL ANGLE, FLANGED
CUP (TYPE TSF) (S/S BY A-A-59650)
FF-B-187/3 NOT 1 BEARING, ROLLER, TAPERED, SINGLE ROW, STEEP ANGLE (TYPE
TSS) (S/S BY A-A-59651)
FF-B-187/4 NOT 1 BEARING, ROLLER, TAPERED, SINGLE ROW, STEEP ANGLE, FLANGED
CUP (TYPE TSSF) (S/S BY A-A-59652)
FF-B-187/5 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, ONE DOUBLE CONE,
TWO SINGLE CUPS, (TYPES TDI AND TDIS) (S/S BY A-A-59653)
FF-B-187/6 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO
SINGLE CONES, ONE DOUBLE CUP, (TYPE TDO) (S/S BY A-A-59654)
FF-B-187/7 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO
SINGLE CONES, ONE DOUBLE CUP (TYPE TDOS) (S/S BY A-A-59655)
FF-B-187/8 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO
SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNA) (S/S BY A-A-59656)
FF-B-187/9 NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO
SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNAS) (S/S BY A-A-59657)
FF-B-187B SUP 1 NOT 1 BEARING, ROLLER, TAPERED (NO S/S DOCUMENT)
FF-B-2844 SUP 1 NOT 1 BEARINGS, BALL, ANNULAR (GENERAL PURPOSE) (NO S/S
DOCUMENT)
FF-B-2844/1 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, MINIATURE SIZE, INSTRUMENT TYPE (CHROMIUM ALLOY STEEL) (S/S BY A-A-59643)
FF-B-2844/2 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, EXTRA LIGHT SERIES (R - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59644)
FF-B-2844/3 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, EXTRA LIGHT SERIES (R - SERIES) (LARGER THAN 0.7500 BORE) (CHROMIUM
ALLOY STEEL) (S/S BY A-A-59645)
FF-B-2844/4 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, MINIATURE SIZE, INSTRUMENT TYPE (CORROSION RESISTANT STEEL) (S/S
BY A-A-59643)
FF-B-2844/5 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, EXTRA LIGHT SERIES (R - SERIES) (0.7500 BORE AND UNDER) (CORROSION
RESISTANT STEEL) (S/S BY A-A-59644)
FF-B-2844/6 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, EXTRA LIGHT SERIES (XLS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY
A-A-59646)
FF-B-2844/7 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, LIGHT SERIES (LS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59647)
FF-B-2844/8 NOT 1 BEARING, BALL, ANNULAR: SINGLE ROW, RADIAL, NON-FILLING
SLOT, MEDIUM SERIES (MS - SERIES) (CHROMIUM ALLOY STEEL) (S/S BY A-A-59648)
MIL-B-0022227B NOT 1 BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR
(NO S/S DOCUMENT)
MIL-B-1083D SUP 1 NOT 3 BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE
IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR
(S/S BY ASTM-F2215)
MIL-B-16129B NOT 2 BEARING, BALL, ANNULAR, OPEN TYPE (FOR TORPEDO GYROSCOPES)
MIL-B-16647A BEARINGS, BALL, ANNULAR (HEAT-RESISTANT, FOR TORPEDO USE)
MIL-B-17380A NOT 1 BEARING, ROLLER, THRUST (S/S BY A-A-52414)
MIL-B-18367 BEARINGS, ROLLER, CYLINDRICAL, RADIAL AND THRUST, SPECIAL
PRECISION
MIL-B-21484C BEARINGS, ANTIFRICTION, TRANSPARENT PLASTIC SKIN, PACKAGING
OF (S/S BY MIL-B-197C)
MIL-B-22227A NOT 1 BEARING, BALL, ANNULAR, GENERATOR AND MOTOR-GENERATOR
MIL-B-22446 NOT 1 BEARING, ANNULAR BALL, HIGH GRADE (NO S/S DOCUMENT)
MIL-B-22616 NOT 1 BEARING, BALL, ANTIFRICTION (NO S/S DOCUMENT)
MIL-B-23063(1) BEARING, BALL, ANNULAR, INSTRUMENT PRECISION (S/S BY MIL-B-81793)
MIL-B-3168A BALLS, BEARING, NON-FERROUS (FOR USE IN BEARINGS AND VALVES)
(USE MIL-B-1083)
MIL-B-38506A(1) NOT 1 BEARING, ROLLER, CYLINDRICAL MX-2847 ( )/FPS-35
(NO S/S DOCUMENT)
MIL-B-3990D(3) NOT 1 BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION,
INCH (S/S BY SAE-AS39901)
MIL-B-58105 NOT 2 BEARING RESTORING BY RACEWAY GRINDING (NO S/S DOCUMENT)
MIL-B-6038A NOT 1 BEARING, BALL, BELLCRANK, ANTI FRICTION, AIRFRAME (S/S
BY SAE-AS6038)
MIL-B-6039E NOT 1 BEARINGS, BALL, ROD END, DOUBLE ROW, SELF-ALIGNING (S/S
BY SAE-AS6039)
MIL-B-7949E(1) SUP 1 NOT 1 BEARING, BALL, AIRFRAME, ANTIFRICTION (S/S
BY SAE-AS7949)
MIL-B-83175(1) NOT 1 BEARING, BALL, ANNULAR, ANTIFRICTION, ACCESSORY,
HIGH SPEED TURBINE, AIRCRAFT (NO S/S DOCUMENT)
MIL-B-83292 BEARING, BALL, ANNULAR, INSTRUMENT, FOR PRECISION ROTATING
COMPONENTS (S/S BY MIL-B-81793)
MIL-B-85107B NOT 1 BEARING, SPIN (SIDEWINDER) (NO S/S DOCUMENT)
MIL-B-85684 NOT 4 BEARING, SPIN (SIDEWINDER)
MIL-B-8859 NOT 1 BEARING, BALL, ANNULAR, ANTIFRICTION, ENGINE ACCESSORIES,
AIRCRAFT (NO S/S DOCUMENT)
MIL-B-8914B(3) NOT 1 BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
(S/S BY SAE-AS8914)
MIL-B-8952B NOT 1 BEARING, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
(S/S BY SAE-AS8952)
MIL-R-22440 NOT 3 ROLLERS, BEARING, NEEDLE, FERROUS, SOLID (S/S BY ASTM-F2511)
MIL-STD-102B NOT 1 ANTI-FRICTION BEARING IDENTIFICATION CODE (NO S/S DOCUMENT)
MIL-STD-1334B(1) NOT 3 PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARINGS
(S/S BY SAE-AS13341)
MS134351THRUMS134400C BALL - CORROSION RESISTANT STEEL, PRECISION GRADE
(NO S/S DOCUMENT)
MS15023A BEARING, ROLLER, CYLINDRICAL (FOR METAL FURNITURE)
MS150451THRUMS150500A BALL - STEEL, GRADE 1 (ASG) (USE MS19059)
MS17102A NOT 2 BEARING, BALL, THRUST, METRIC, SELF-ALIGNING
MS17103A NOT 1 BEARING, ROLLER, THRUST, GROUND, SINGLE DIRECTION, INCH
SIZE, FLAT RACE SURFACE, RIGID OR FLAT SEAT TYPE , WITH RETAINER (S/S
BY A-A-52414)
MS17107A NOT 1 BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT MOTOR-GENERATORS,
TYPE I (S/S BY SAE-AS17107)
MS17108A NOT 2 BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS,
TYPE II (S/S BY SAE-AS17108)
MS17130F NOT 3 RING, BEARING, INNER: FOR NEEDLE ROLLER BEARING WITH DRAWN
OUTER RING (S/S BY ASTM-F2163)
MS17131H NOT 2 BEARING, ROLLER, NEEDLE: DRAWN OUTER RING, FULL COMPLEMENT,
WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (S/S BY ASTM-F2162)
MS17132A BEARING, ROLLER, NEEDLE, THICK OUTER RACE, WITHOUT INNER RACE
(USE MS 51961)
MS17133B(1) NOT 1 BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW
MS17136 RACE, BEARING, INNER-CARBON STEEL, NEEDLE ROLLER BEARING
MS17161C NOT 1 BEARING, BALL, THRUST: INCH AND METRIC SIZES, GROOVED RACE
SURFACE RIGID OR FLAT SEAT TYPE (S/S BY A-A-52491)
MS17162A NOT 1 BEARING, BALL, THRUST, INCH SIZE, SINGLE DIRECTION, FLAT
RACE SURFACE, STAGGERED BALL TYPE
MS17169A NOT 2 BEARING, ROLLER, THRUST, TWO CHANNELED RACE SURFACE, RIGID
OR FLAT SEAT TYPE (S/S BY ASTM-F2590)
MS19059C NOT 3 BALLS, BEARING, CHROME ALLOY STEEL (S/S BY ASTM-F2215)
MS19060D NOT 3 BALLS, BEARING, CORROSION RESISTANT STEEL (S/S BY ASTM-F2215)
MS19061C NOT 3 BALLS, BEARING, CARBON STEEL (S/S BY ASTM-F2215)
MS19062B NOT 3 BALLS, BEARING, NON-FERROUS, BRASS (S/S BY ASTM-F2215)
MS19063C NOT 3 BALLS, BEARING, BRONZE (S/S BY ASTM-F2215)
MS19064C NOT 3 BALLS, BEARING, NICKEL-COPPER ALLOY (K-MONEL) (S/S BY ASTM-F2215)
MS19065A NOT 3 ROLLER, BEARING, FERROUS, SOLID, SPHERICAL END (S/S BY
ASTM-F2443)
MS19073 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO
ROLLER RETAINING RIBS ON INNER RING, TWO ROLLER RETAINING SNAP RINGS ON
OUTER RING, NON-LOCATING
MS19074 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TOW
ROLLER RETAINING RIBS ON INNER RING, CYLINDRICAL OUTER RING, NON-LOCATING
MS19075 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, CYLINDRICAL
INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION LOCATING
MS19076 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, CYLINDRICAL
INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, NON-LOCATING
MS19077 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO
ROLLER RETAINING RIBS ON INNER RING, ONE ROLLER RETAINING RIB ON OUTER
RING, ONE DIRECTION LOCATING
MS19078 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, ONE
ROLLER RETAINING RIB ON INNER RING, TWO ROLLER RETAINING RIBS ON OUTER
RING, ONE DIRECTION LOCATING
MS19079 NOT 1 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO
ROLLER RETAINING RIBS ON INNER RING, TWO ROLLER RETAINING RIBS ON OUTER
RING, TWO DIRECTION LOCATING
MS19081B NOT 1 BEARING, ROLLER, TAPERED SINGLE ROW OF ROLLERS, NORMAL
ANGLE
MS19082A NOT 2 BEARING, ROLLER, TAPERED, SINGLE ROW OFROLLERS, NORMAL
ANGLE, LLANGED CUP, TYPE 755 (TSF)
MS19083A NOT 1 BEARING, ROLLER, TAPERED, SINGLE ROW OFROLLERS, STEEP ANGLE,
TYPE 753 (TSS)
MS19084A NOT 2 BEARING, ROLLER, TAPERED, SINGLE ROW OFROLLERS, STEEP ANGLE,
FLANGED CUP, TYPE 759 (TSSF)
MS19085A NOT 1 BEARING, ROLLER, TAPERED, TWO ROWS OF ROLLERS, TYPE 757
(TDI) & 770 (TDIS)
MS19086A NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW OF ROLLERS, NORMAL
ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, ADJUSTABLE, TYPE 761 (TDO)
MS19087A NOT 1 BEARING ROLLER, TAPERED DOUBLE ROW OF ROLLERS, STEEP ANGLE,
TWO SINGLE CONES, ONE DOUBLE CUP, ADJUSTABLE, TYPE 763 (TDOS)
MS19088A NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW OF ROLLERS, NORMAL
ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NON ADJUSTABLE, TYPE 764 (TNA)
MS19089A NOT 1 BEARING, ROLLER, TAPERED, DOUBLE ROW OF ROLLERS, STEEP
ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NON ADJUSTABLE, TYPE 767 (TNA)
MS20200B BEARING, BALL, AIRFRAME, ANTI-FRICTION HEAVY DUTY (USE MS27640)
MS20201A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY (USE
MS 27641)
MS20202A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY (USE
MS 27642)
MS20206B BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, HEAVY
DUTY (USE MS 27643)
MS20207B BEARING, BALL, AIRFRAME, ANTI-FRICTION, DOUBLE ROW, HEAVY DUTY
(USE MS27644)
MS20218B NOT 2 BEARING, BALL, ANTI-FRICTION, AIRFRAME (S/S BY SAE-AS20218)
MS21150D NOT 2 BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, SOLID SHANK,
SELF-ALIGNING, AIRFRAME, TYPE I, -65 DEG. TO 350 DEG. F (S/S BY SAE-AS21150)
MS21151D NOT 2 BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, EXTERNAL
THREAD, SELF-ALIGNING, AIRFRAME, TYPE II, -65 DEG. TO 300 DEG. F (S/S
BY SAE-AS21151)
MS21152D NOT 2 BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, HOLLOW SHANK,
SELF-ALIGNING, AIRFRAME, TYPE III, -65 DEG. TO 300 DEG. F (S/S BY SAE-AS21152)
MS21153E NOT 2 BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, INTERNAL
THREAD, SELF-ALIGNING, AIRFRAME, TYPE IV, -65 DEG. F TO 300 DEG. F (S/S
BY SAE-AS21153)
MS21220D NOT 1 BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING,
ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67 DEG. TO 350 DEG. F,
SEALED (S/S BY SAE-AS21220)
MS21221D NOT 1 BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING,
ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE I, -67 DEG. TO 350 DEG. F, SEALED
(S/S BY SAE-AS21221)
MS21223D NOT 1 BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING,
ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE I, -67 DEG. TO 350 DEG. F, SEALED
(S/S BY SAE-AS21223)
MS21428C NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY,
PRECISION (S/S BY SAE-AS21428)
MS21431A NOT 1 BEARING, ROLLER, SELF-ALIGNING SINGLE ROW ANTI-FRICTION,
SEALED -65 TO 350 F, TYPE I (S/S BY SAE-AS21431)
MS21432B NOT 2 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, TYPE
VII, ANTIFRICTION, INCH
MS21438C NOT 1 BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TRACK
ROLLER, SEALED, TYPE V, ANTIFRICTION, INCH (S/S BY SAE-AS21438)
MS21439B NOT 1 BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK
ROLLER, SEALED, TYPE VI, INCH (S/S BY SAE-AS21439)
MS21440B NOT 1 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, SEALED,
TYPE VIII, ANTIFRICTION, INCH (S/S BY SAE-AS21440)
MS21442B NOT 1 BEARING, ROLLER, NEEDLE, TRACK ROLLER, SEALED, TYPE X,
ANTIFRICTION, INCH (S/S BY SAE-AS21442)
MS21443B NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, PULLEY (S/S BY
SAE-AS21443)
MS21446A NOT 1 BEARING, ROLLER, SELF-ALIGNING SINGLE ROW, BARREL ROLLER,
TORQUE TUBE, AIRFRAME, ANTIFRICTION, SEALED TYPE V (S/S BY SAE-AS21446)
MS21447A NOT 1 BEARING, ROLLER, NEEDLE, TRACK ROLLER CROWN RADIUSED O.D.
INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH (S/S BY SAE-AS21447)
MS24461J NOT 2 BEARING ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I,
ANTIFRICTION, INCH (S/S BY SAE-AS24461)
MS24462H NOT 1 BEARING, ROLLER, NEEDLE-SINGLE ROW, THIN SHELL, TYPE II,
ANTIFRICTION (S/S BY SAE-AS24462)
MS24463H NOT 1 BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, SELF-ALIGNING,
TYPE III, ANTIFRICTION, INCH (S/S BY SAE-AS24463)
MS24464H NOT 1 BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING,
TYPE IV, ANTIFRICTION, INCH (S/S BY SAE-AS24464)
MS24465J BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, TRACK ROLLER,
TYPE V, ANTIFRICTION, INCH (USE MS 21438)
MS24466K BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, TRACK ROLLER,
TYPE VI ANTIFRICTION, INCH (USE MS21439)
MS26508B BEARING, BALL, ROD END, SOLID SHANK, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME (USE MS-21150)
MS26559 BEARING, BALL-ANNULAR, ANTIFRICTION, ENGINE ACCESSORIES, AIRCRAFT,
TYPE I (LAND )INNER OR OUTER( CONTROLLED SEPARATOR)
MS26560 BEARING, BALL-ANNULAR ANTIFRICTION, ENGINE ACCESSORIES, AIRCRAFT,
TYPE 11 (BALL CONTROLLED SEPARATOR)
MS27261C BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, LIGHT
AND HEAVY DUTY (USE MS 27645)
MS27640F NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY (S/S
BY SAE-AS27640)
MS27641F NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, INTERMEDIATE DUTY
(S/S BY SAE-AS27641)
MS27642G NOT 1 BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY (S/S BY SAE-AS27642)
MS27643F NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING,
DOUBLE ROW, HEAVY DUTY (S/S BY SAE-AS27643)
MS27644D NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, DOUBLE ROW, HEAVY
DUTY (S/S BY SAE-AS27644)
MS27645E NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING LIGHT
AND HEAVY DUTY (S/S BY SAE-AS27645)
MS27646F NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY
(S/S BY SAE-AS27646)
MS27647F NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA WIDE, DOUBLE
ROW, INTERMEDIATE DUTY (S/S BY SAE-AS27647)
MS27648E NOT 1 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF ALIGNING,
EXTRA LIGHT DUTY (S/S BY SAE-AS27648)
MS27649D NOT 1 BEARING, BALL, AIRFRAME, ANTIFRICTION, INTERMEDIATE DUTY
(S/S BY SAE-AS27649)
MS28912E NOT 1 BEARING, ROLLER, SELF-ALIGNING, SINGLE ROW AIRFRAME, ANTI-FRICTION,
SEALED, TYPE 1 (S/S BY SAE-AS28912)
MS28913D NOT 1 BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION,
SEALED, TYPE II (S/S BY SAE-AS28913)
MS28914D NOT 1 BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION,
SEALED, TYPE III (S/S BY SAE-AS28914)
MS28915D NOT 1 BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW TORQUE TUBE,
AIRFRAME, ANTI-FRICTION, SEALED, TYPE IV (S/S BY SAE-AS28915)
MS3224A NOT 3 BALLS, BEARING, AIRCRAFT QUALITY STEEL (S/S BY ASTM-F2215)
MS3226 NOT 3 BALLS, BEARING, GRADE 10, AIRCRAFT- QUALITY STEEL (S/S BY
ASTM-F2215)
MS500072C NOT 3 BEARING, ROLLER, NEEDLE: ASSEMBLY (THICK OUTER RACE) (S/S
BY ASTM-F2430)
MS500087B BEARING, ROLLER, NEEDLE. ASSEMBLY (THIN OUTER RACE)
MS51961F NOT 3 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS AND
CAGE (S/S BY ASTM-F2246)
MS51962F NOT 3 RING, BEARING, INNER: FOR NEEDLE ROLLER BEARING WITH THICK
OUTER RING (S/S BY ASTM-F2431)
MS52141 NOT 1 BEARING, ROLLER, NEEDLE: DRAWN OUTER RING, CAGED, WITHOUT
INNER RING OPEN AND CLOSED END, STANDARD TYPE
MS52142A NOT 3 BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT,
WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE
MS52143 NOT 3 BEARING, ROLLER, NEEDLE: THICK OUTER RING WITH ROLLERS,
CAGE AND SEALS
MS9461A BALL, BEARING - PRECISION GRADE, AMS 7445 (S/S BY MS19060)
NAM913 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS (METRIC) GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
NAM913-1 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CHROMIUM ALLOY STEEL, ABEC 5P (METRIC)
(NO S/S DOCUMENT)
NAM913-10 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CHROMIUM ALLOY STEEL, ABEC 7P (METRIC) (NO S/S DOCUMENT)
NAM913-11 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 5P (METRIC) (NO S/S DOCUMENT)
NAM913-12 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 7P (METRIC) (NO S/S DOCUMENT)
NAM913-13 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CHROMIUM-ALLOY STEEL, ABEC 5P (METRIC) (NO S/S DOCUMENT)
NAM913-14 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CHROMIUM-ALLOY STEEL, ABEC 7P (METRIC) (NO S/S DOCUMENT)
NAM913-15 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTANT STEEL, ABEC 5P (METRIC) (NO S/S DOCUMENT)
NAM913-16 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTANT STEEL, ABEC 7P (METRIC) (NO S/S DOCUMENT)
NAM913-2 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CHROMIUM ALLOY STEEL, ABEC 7P (METRIC)
(NO S/S DOCUMENT)
NAM913-3 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 5P
(METRIC) (NO S/S DOCUMENT)
NAM913-4 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 7P
(METRIC) (NO S/S DOCUMENT)
NAM913-5 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CHROMIUM ALLOY STEEL, ABEC 5P (METRIC)
(NO S/S DOCUMENT)
NAM913-6 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CHROMIUM ALLOY STEEL, ABEC 7P (METRIC)
(NO S/S DOCUMENT)
NAM913-7 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CHROMIUM ALLOY STEEL, ABEC 5P (METRIC)
(NO S/S DOCUMENT)
NAM913-8 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CORROSION-RESISTANT STEEL, ABEC 7P (METRIC)
(NO S/S DOCUMENT)
NAM913-9 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CHROMIUM ALLOY STEEL, ABEC 5P (METRIC) (NO S/S DOCUMENT)
NASM81793 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
NASM81793-1 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CHROMIUM ALLOY STEEL, ABEC 5P (NO
S/S DOCUMENT)
NASM81793-10 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CHROMIUM ALLOY
STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-11 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT
STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-12 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT
STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-13 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CHROMIUM ALLOY
STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-14 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CHROMIUM ALLOY
STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-15 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CORROSION RESISTANT
STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-16 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CORROSION RESISTANT
STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-17 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT UNFLANGED, NON-SEPARABLE AND COUNTERMEASURE
OUTER RING, CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-18 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-19 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-2 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CHROMIUM ALLOY STEEL, ABEC 7P (NO
S/S DOCUMENT)
NASM81793-20 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-21 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NONSEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-22 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NONSEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-23 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NONSEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CORROSION RESISTANT STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-24 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NONSEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CORROSION RESISTANT STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-25 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-26 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-27 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANNULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTANT STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-28 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTANT STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-29 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS, AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING,
CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-3 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 5P
(NO S/S DOCUMENT)
NASM81793-30 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS, AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED SEPARABLE AND STEPPED INNER RING,
CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-31 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS, AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTANT STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-32 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS, AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING,
CORROSION RESISTING STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-33 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER
RING, CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-34 BEARINGS, BALL ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER
RING, CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-35 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER
RING, CORROSION RESISTANT STEEL, ABEC 5P (NO S/S DOCUMENT)
NASM81793-36 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER
RING, CORROSION RESISTANT STEEL, ABEC 7P (NO S/S DOCUMENT)
NASM81793-4 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 7P
(NO S/S DOCUMENT)
NASM81793-5 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CHROMIUM ALLOY STEEL, ABEC 5P (NO S/S
DOCUMENT)
NASM81793-6 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CHROMIUM ALLOY STEEL, ABEC 7P (NO S/S
DOCUMENT)
NASM81793-7 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CORROSION RESISTANT STEEL, ABEC 5P (NO
S/S DOCUMENT)
NASM81793-8 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, FLANGED, CORROSION RESISTANT STEEL, ABEC 7P (NO
S/S DOCUMENT)
NASM81793-9 BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CHROMIUM ALLOY
STEEL, ABEC 5P (NO S/S DOCUMENT)
QPL-16129-1 NOT 1 BEARINGS, BALL (FOR TORPEDO GYROSCOPES) (NO S/S DOCUMENT)
QPL-17931 NOT 1 BEARING, BALL, ANNULAR, FOR QUIET OPERATION
QPL-22227-6 NOT 2 BEARING, BALL, ANNULAR, GENERATOR AND MOTOR-GENERATOR
(NO S/S DOCUMENT)
QPL-23063 BEARING, BALL, ANNULAR, INSTRUMENT PRECISION
QPL-3990-11 NOT 1 BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH
(S/S BY QPL-SAE-AS3990)
QPL-6039-5 NOT 1 BEARINGS, BALL, ROD END, DOUBLE ROW, SELF-ALIGNING (S/S
BY QPL-AS6039)
QPL-7949-24 NOT 1 BEARINGS, BALL, AIRFRAME, ANTIFRICTION (S/S BY QPL-SAE-AS7949)
QPL-8914-9 NOT 1 BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
(S/S BY QPL-SAE-AS8914)
QPL-8952-7 NOT 1 BEARING, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
(S/S BY QPL-SAE-AS8952)
QPL-FF-B-171-53 NOT 1 BEARINGS, BALL ANNULAR, (GENERAL PURPOSE) METRIC
(NO S/S DOCUMENT)
QPL-FF-B-185-39 NOT 1 BEARINGS, ROLLER, CYLINDRICAL, AND BEARINGS, ROLLER,
SELF-ALIGNING (NO S/S DOCUMENT)
QPL-FF-B-187-32 NOT 1 BEARING, ROLLER, TAPERED (NO S/S DOCUMENT)
SAE-AS21446 BEARING, ROLLER, SELF-ALIGNING SINGLE ROW, BARREL ROLLER,
TORQUE TUBE, AIRFRAME, ANTIFRICTION, SEALED TYPE V (NO S/S DOCUMENT)
SAE-AS21446 BEARING, ROLLER, SELF-ALIGNING SINGLE ROW, BARREL ROLLER,
TORQUE TUBE, AIRFRAME, ANTIFRICTION, SEALED TYPE V (NO S/S DOCUMENT)
SAE-AS28912 BEARING, ROLLER, SELF-ALIGNING, SINGLE ROW AIRFRAME, ANTI-FRICTION,
SEALED, TYPE I (NO S/S DOCUMENT)
A-A-52414A 轴承，滚子，推力 BEARING, ROLLER, THRUST
A-A-52491 NOT 1 轴承，钢球，推力：英寸和公制尺寸，槽种族表面刚性或单位所在地类型 BEARING, BALL, THRUST:
INCH AND METRIC SIZES, GROOVED RACE SURFACE RIGID OR FLAT SEAT TYPE
A-A-55598A NOT 1 轴承，滚子，圆柱，单列滚子，二辊保留肋骨上内环，一台压路机保留肋骨上外环，一个方向的定位 BEARINGS,
ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLERS RETAINING RIBS
ON INNER RING, ONE ROLLER RETAINING RIB ON OUTER RING, ONE DIRECTION LOCATING
A-A-55599A NOT 1 轴承，滚子，圆柱，单列滚子，一台压路机保留肋骨上内环，二辊保留肋骨上外环，一个方向的定位 BEARINGS,
ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, ONE ROLLER RETAINING RIBS
ON INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION
LOCATING
A-A-55600A NOT 1 轴承，滚子，圆柱，单列滚子，二辊保留肋骨上内环，二辊保留肋骨上外环，两个方向的定位 BEARINGS, ROLLER,
CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER
RING, TWO ROLLER RETAINING RIBS ON OUTER RING, TWO DIRECTION LOCATING
A-A-55601A NOT 1 轴承，滚子，圆柱，单列滚子，圆柱内圈，二辊保留肋骨上外环，非-定位 BEARINGS, ROLLER, CYLINDRICAL,
SINGLE ROW OF ROLLERS, CYLINDRICAL INNER RING, TWO ROLLER RETAINING RIBS
ON OUTER RING, NON - LOCATING
A-A-55602A NOT 1 轴承，滚子，圆柱，单列滚子，二辊保留肋骨上内环，外环圆柱，非-定位 BEARINGS, ROLLER, CYLINDRICAL,
SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER RING, CYLINDRICAL
OUTER RING, NON - LOCATING
A-A-59581B 轴承，钢球，环形，单列，径向，非充填槽，钻孔直径10毫米下 BEARING, BALL, ANNULAR, SINGLE
ROW, RADIAL, NON-FILLING SLOT, BORE DIAMETERS UNDER 10 MM
A-A-59582B 轴承，钢球，环形，单列，径向，非充填槽，尺寸系列19 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, NON-FILLING SLOT, DIMENSION SERIES 19
A-A-59583B 轴承，钢球，环形，单列，径向，非充填槽，尺寸系列10 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, NON-FILLING SLOT, DIMENSION SERIES 10
A-A-59584B 轴承，钢球，环形，单列，径向，非充填槽，尺寸系列02 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02
A-A-59585B 轴承，钢球，环形，单列，径向，非充填槽，尺寸系列03 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
A-A-59586B 轴承，钢球，环形，单列，径向，非充填槽，尺寸系列04 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, NON-FILLING SLOT, DIMENSION SERIES 04
A-A-59587B 轴承，钢球，环形，单列，径向，灌装插槽，尺寸系列02 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, FILLING SLOT, DIMENSION SERIES 02
A-A-59589B 轴承，钢球，环形，单列，径向，灌装插槽，尺寸系列03 BEARING, BALL, ANNULAR, SINGLE ROW,
RADIAL, FILLING SLOT, DIMENSION SERIES 03
A-A-59595B 轴承，钢球，环形，单列，径向，非充填插槽，墨盒类型无油脂堵塞，尺寸系列32 BEARING, BALL, ANNULAR,
SINGLE ROW, RADIAL, NON-FILLING SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG,
DIMENSION SERIES 32
A-A-59596B 轴承，钢球，环形，单列，径向，非充填插槽，墨盒类型无油脂堵塞，尺寸系列33 BEARING, BALL, ANNULAR,
SINGLE ROW, RADIAL, NON-FILLING SLOT, CARTRIDGE TYPE WITHOUT GREASE PLUG,
DIMENSION SERIES 33
A-A-59597B 轴承，钢球，环状，双列，径向，内部自调，尺寸系列02 BEARING, BALL, ANNULAR, DOUBLE ROW,
RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 02
A-A-59598B 轴承，钢球，环状，双列，径向，内部自调，尺寸系列03 BEARING, BALL, ANNULAR, DOUBLE ROW,
RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 03
A-A-59599B 轴承，钢球，环状，双列，径向，内部自调，维一系列22 BEARING, BALL, ANNULAR, DOUBLE ROW,
RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 22
A-A-59600B 轴承，钢球，环状，双列，径向，内部自调，尺寸系列23 BEARING, BALL, ANNULAR, DOUBLE ROW,
RADIAL, INTERNAL SELF-ALIGNING, DIMENSION SERIES 23
A-A-59623A 轴承，钢球，环形，单列，角接触，接触角11通过22 ，尺寸系列19 BEARING, BALL, ANNULAR, SINGLE
ROW, ANGULAR CONTACT, CONTACT ANGLE 11 THROUGH 22 , DIMENSION SERIES 19
A-A-59624A 轴承，钢球，环形，单列，角接触，接触角11通过22 ，尺寸系列10 BEARING, BALL, ANNULAR, SINGLE
ROW, ANGULAR CONTACT, CONTACT ANGLE 11 THROUGH 22 , DIMENSION SERIES 10
A-A-59625A 轴承，钢球，环形，单列，角接触，接触角11通过22 ，尺寸系列02 BEARING, BALL, ANNULAR, SINGLE
ROW, ANGULAR CONTACT, CONTACT ANGLE 11 THROUGH 22 , DIMENSION SERIES 02
A-A-59626A 轴承，钢球，环形，单列，角接触，接触角11通过22 ，尺寸系列03 BEARING, BALL, ANNULAR, SINGLE
ROW, ANGULAR CONTACT, CONTACT ANGLE 11 THROUGH 22 , DIMENSION SERIES 03
A-A-59627A 轴承，钢球，环形，单列，角接触，接触角11度。通过22度，尺寸系列04 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 11 DEG. THROUGH 22 DEG., DIMENSION
SERIES 04
A-A-59628A 轴承，钢球，环形，单列，角接触，接触角23度。通过32度，尺寸系列10 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEG. THROUGH 32 DEG., DIMENSION
SERIES 10
A-A-59629A 轴承，钢球，环形，单列，角接触，接触角23度。通过32度，尺寸系列02 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEG. THROUGH 32 DEG., DIMENSION
SERIES 02
A-A-59630A 轴承，钢球，环形，单列，角接触，接触角23度。通过32度，尺寸系列03 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEG. THROUGH 32 DEG., DIMENSION
SERIES 03
A-A-59631A 轴承，钢球，环形，单列，角接触，接触角23度。通过32度，尺寸系列04 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 23 DEG. THROUGH 32 DEG., DIMENSION
SERIES 04
A-A-59632A 轴承，钢球，环形，单列，角接触，接触角33度。通过45度，尺寸系列10 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEG. THROUGH 45 DEG., DIMENSION
SERIES 10
A-A-59633A 轴承，钢球，环形，单列，角接触，接触角33度。通过45度，尺寸系列02 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEG. THROUGH 45 DEG., DIMENSION
SERIES 02
A-A-59634A 轴承，钢球，环形，单列，角接触，接触角33度。通过45度，尺寸系列03 BEARING, BALL, ANNULAR,
SINGLE ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEG. THROUGH 45 DEG., DIMENSION
SERIES 03
A-A-59635 轴承，钢球，环形，单列，角接触，接触角33度，通过45度尺寸系列04 BEARING, BALL, ANNULAR, SINGLE
ROW, ANGULAR CONTACT, CONTACT ANGLE 33 DEGREES THROUGH 45 DEGREES DIMENSION
SERIES 04
A-A-59636 轴承，钢球，环状，双列，角接触，非充填插槽，顶点的接触角以外的轴承，尺寸系列32 BEARING, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES
OUTSIDE BEARING, DIMENSION SERIES 32
A-A-59637 轴承，钢球，环状，双列，角接触，非充填插槽，顶点的接触角以外的轴承，尺寸系列33 BEARING, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES
OUTSIDE BEARING, DIMENSION SERIES 33
A-A-59638 轴承，钢球，环状，双列，角接触，非充填插槽，顶点的接触角内的轴承，尺寸系列32 BEARING, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, NON-FILLING SLOT, VERTEX OF CONTACT ANGLES
INSIDE BEARING, DIMENSION SERIES 32
A-A-59639 轴承，钢球，环状，双列，角接触，灌装插槽，顶点的接触角内的轴承，尺寸系列33 BEARING, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES INSIDE
BEARING, DIMENSION SERIES 33
A-A-59640 轴承，钢球，环状，双列，角接触，灌装插槽，顶点的接触角以外的轴承，尺寸系列32 BEARING, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE
BEARING, DIMENSION SERIES 32
A-A-59641A 轴承，钢球，环状，双列，角接触，灌装插槽，顶点的接触角以外的轴承，尺寸系列33 BEARINGS, BALL, ANNULAR,
DOUBLE ROW, ANGULAR CONTACT, FILLING SLOT, VERTEX OF CONTACT ANGLES OUTSIDE
BEARING, DIMENSION SERIES 33
A-A-59643A 轴承，钢球，环形，单列，径向，非充填插槽，小型规模，仪器类型 BEARINGS, BALL, ANNULAR, SINGLE
ROW, RADIAL, NON-FILLING SLOT, MINIATURE SIZE, INSTRUMENT TYPE
A-A-59644A 轴承，钢球，环形，单列，径向，非充填插槽，额外的灯系列（ -系列） BEARINGS, BALL, ANNULAR,
SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (R - SERIES)
A-A-59645A 轴承，钢球，环形，单列，径向，非充填插槽，额外的灯系列（ R系列） （大于0.7500口径） BEARINGS, BALL,
ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (R-SERIES)
(LARGER THAN 0.7500 BORE)
A-A-59646A 轴承，钢球，环形，单列，径向，非充填插槽，额外的灯系列（的xls -系列） BEARINGS, BALL, ANNULAR,
SINGLE ROW, RADIAL, NON-FILLING SLOT, EXTRA LIGHT SERIES (XLS - SERIES)
A-A-59647A 轴承，钢球，环形，单列，径向，非充填插槽，灯系列（康乐事务-系列） BEARINGS, BALL, ANNULAR,
SINGLE ROW, RADIAL, NON-FILLING SLOT, LIGHT SERIES (LS - SERIES)
A-A-59648A 轴承，钢球，环形，单列，径向，非充填插槽，中型系列（女士-系列） BEARINGS, BALL, ANNULAR, SINGLE
ROW, RADIAL, NON-FILLING SLOT, MEDIUM SERIES (MS - SERIES)
A-A-59649B 轴承，滚子，圆锥，单列，正常的角度（类型6月24日ts ） BEARINGS, ROLLER, TAPERED, SINGLE
ROW, NORMAL ANGLE (TYPE TS)
A-A-59650A 轴承，滚子，圆锥，单列，正常的角度来看，法兰杯（类型tsf ） BEARINGS, ROLLER, TAPERED,
SINGLE ROW, NORMAL ANGLE, FLANGED CUP (TYPE TSF)
A-A-59651A 轴承，滚子，圆锥，单列，陡峭的角度（类型可溶性固形物） BEARINGS, ROLLER, TAPERED, SINGLE
ROW, STEEP ANGLE (TYPE TSS)
A-A-59652A 轴承，滚子，圆锥，单列，陡峭的角度来看，法兰杯（类型tssf ） BEARINGS, ROLLER, TAPERED,
SINGLE ROW, STEEP ANGLE, FLANGED CUP (TYPE TSSF)
A-A-59653A 轴承，滚子，圆锥，双列，一双锥，两个单杯（类型的TDI和tdis ） BEARINGS, ROLLER, TAPERED,
DOUBLE ROW, ONE DOUBLE CONE, TWO SINGLE CUPS (TYPES TDI AND TDIS)
A-A-59654A 轴承，滚子，圆锥，双列，正常的角度来看，两个单锥，一个双杯（类型商品说明条例） BEARINGS, ROLLER, TAPERED,
DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDO)
A-A-59655A 轴承，滚子，圆锥，双列，陡峭的角度来看，两个单锥，一个双杯（类型tdos ） BEARINGS, ROLLER, TAPERED,
DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDOS)
A-A-59656A 轴承，滚子，圆锥，双列，正常的角度来看，两个单锥，一个双杯， nonadjustable （类型混合液） BEARINGS,
ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE
CUP, NONADJUSTABLE (TYPE TNA)
A-A-59657A 轴承，滚子，圆锥，双列，陡峭的角度来看，两个单锥，一个双杯， nonadjustable （类型技术需求评估） BEARINGS,
ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE
CUP, NONADJUSTABLE (TYPE TNAS)
A-A-59658A 轴承，滚子，圆锥，双列，直孔，两个单锥与接触前面临的开槽和倒角润滑，其中一个双杯与润滑孔和槽（类型tnasw ） BEARINGS,
ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING
FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH
LUBRICATION HOLES AND GROOVE (TYPE TNASW)
A-A-59659A 轴承，滚子，圆锥，双列，直孔，两个单锥，锥面对肋骨回到地面上外径为密封的目的，一个双杯与润滑孔和槽（类型tnaswe
） BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES,
CONE BACK FACE RIB GROUND ON THE OUTER DIAMETER FOR SEALING PURPOSES,
ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASWE)
ABMA12.1 文书球轴承，公制设计 INSTRUMENT BALL BEARINGS, METRIC DESIGN
ABMA12.2 文书球轴承英寸设计 INSTRUMENT BALL BEARINGS INCH DESIGN
ABMA18.1 滚针轴承的径向，公制设计 NEEDLE ROLLER BEARINGS RADIAL, METRIC DESIGN
ABMA18.2 轴承，滚针径向，英寸设计 BEARINGS, NEEDLE ROLLER RADIAL, INCH DESIGN
ABMA19.1 轴承，滚子，圆锥径向公制设计 BEARINGS, ROLLER, TAPERED RADIAL METRIC DESIGN
ABMA19.2 轴承，滚子，圆锥-径向英寸设计 BEARINGS, ROLLER, TAPERED - RADIAL INCH DESIGN
ABMA20 轴承的滚珠，径向，圆柱滚子和球面滚子的种类，公制设计 BEARINGS OF BALL, RADIAL, CYLINDRICAL
ROLLER AND SPHERICAL ROLLER TYPES, METRIC DESIGN
ABMA22.1 轴承，球面滑动径向联合类型，度量设计 BEARINGS, SPHERICAL PLAIN RADIAL JOINT TYPE,
METRIC DESIGN
ABMA22.2 轴承，球面滑动径向联合类型，设计英寸 BEARINGS, SPHERICAL PLAIN RADIAL JOINT TYPE,
INCH DESIGN
ABMA23.2 轴承，推力圆锥滚子类型-英寸设计 BEARINGS, THRUST, OF TAPERED ROLLER TYPE - INCH
DESIGN
ABMA24.1 球轴承，推力，圆柱滚子和球面滚子类型-十进制设计 BEARINGS OF BALL, THRUST, CYLINDRICAL
ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN
ABMA24.2 球轴承，推力和圆柱滚子类型-英寸设计 BEARINGS OF BALL, THRUST AND CYLINDRICAL ROLLER
TYPES - INCH DESIGN
ABMA25.2 轴承，轧制，直线运动循环球，套筒式英寸系列 BEARINGS, ROLLING, LINEAR MOTION RECIRCULATING
BALL, SLEEVE TYPE INCH SERIES
ABMA26.2 球轴承，薄切片，英寸设计 BALL BEARINGS, THIN SECTION, INCH DESIGN
ASTM-B439 轴承，铁基烧结（石油浸渍） BEARINGS, IRON-BASE SINTERED (OIL IMPREGNATED)
ASTM-F2162 轴承，滚子，针：制定外环，充分补充，没有内圈，开放和封闭，为此，标准型 BEARING, ROLLER, NEEDLE:
DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED
END, STANDARD TYPE
ASTM-F2163 环，轴承，内蒙古：滚针轴承与制定外环 RING, BEARING, INNER: FOR NEEDLE ROLLER
BEARING WITH DRAWN OUTER RING
ASTM-F2215 滚珠，轴承，黑色和有色金属为使用在轴承，阀门，轴承和应用，标准规格为 BALLS, BEARINGS, FERROUS
AND NONFERROUS FOR USE IN BEARINGS, VALVES, AND BEARING APPLICATIONS,
STANDARD SPECIFICATION FOR
ASTM-F2246 轴承，滚子，针：厚外环与辊和笼子 BEARING, ROLLER, NEEDLE: THICK OUTER RING
WITH ROLLERS AND CAGE
ASTM-F2430 轴承，滚子，针：大会（厚外圈） BEARING, ROLLER, NEEDLE: ASSEMBLY (THICK OUTER
RACE)
ASTM-F2431 环轴承，内蒙古：滚针轴承厚厚的外环 RING BEARING, INNER: FOR NEEDLE ROLLER BEARING
WITH THICK OUTER RING
ASTM-F2443 轧辊，轴承，针，有色，固体，球形结束 ROLLER, BEARING, NEEDLE, FERROUS, SOLID,
SPHERICAL END
ASTM-F2511 轧辊，轴承，针，有色，固体，标准规格为 ROLLERS, BEARING, NEEDLE, FERROUS, SOLID,
STANDARD SPECIFICATION FOR
ASTM-F2590 轴承，滚子，推力，二渠道的种族，表面刚性或单位所在地的类型，标准规格为 BEARING, ROLLER, THRUST,
TWO CHANNELED RACE SURFACE, RIGID OR FLAT SEAT TYPE, STANDARD SPECIFICATION
FOR
ASTM-F2591 轴承，滚子，圆锥，单列滚子（公制系列）标准规格为 BEARING, ROLLER, TAPERED, SINGLE ROW
OF ROLLERS (METRIC SERIES) STANDARD SPECIFICATION FOR
MIL-B-17931E(2) 轴承，钢球，环形，静音操作 BEARINGS, BALL, ANNULAR, FOR QUIET OPERATION
MIL-B-81793/1(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，铬合金钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CHROMIUM-ALLOY STEEL, ABEC 5P
MIL-B-81793/10(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，内环延长，铬合金钢， abec 7P条
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CHROMIUM-ALLOY STEEL, ABEC
7P
MIL-B-81793/11(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，内环延长，耐蚀钢， abec 5p
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL,
ABEC 5P
MIL-B-81793/12(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，内环延长，耐蚀钢， abec 7P条
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL,
ABEC 7P
MIL-B-81793/13(1) 轴承，球，环形，仪器及精密旋转部件，深沟，法兰，内环延长，铬合金钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, FLANGED, INNER RING EXTENDED, CHROMIUM-ALLOY STEEL, ABEC 5P
MIL-B-81793/14(1) beraing ，球，环形，仪器及精密旋转部件，深沟，法兰，内环延长，铬合金钢， abec 7P条 BERAING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, FLANGED, INNER RING EXTENDED, CHROMIUM-ALLOY STEEL, ABEC 7P
MIL-B-81793/15(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，内环延长，耐蚀钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, FLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC
5P
MIL-B-81793/16(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，内环延长，耐蚀钢， abec 7P条 BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, FLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC
7P
MIL-B-81793/17(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环铬合金钢，
abec 5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING CHROMIUM-ALLOY STEEL, ABEC 5P
MIL-B-81793/18(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环铬合金钢，
abec 7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING CHROMIUM-ALLOY STEEL, ABEC 7P
MIL-B-81793/19(1) 轴承，钢球，环形，文书和precisi0n旋转部件，角接触， unflanged ，非可分和counterbored外环耐蚀钢，
abec 5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISI0N ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING CORROSION RESISTANT STEEL, ABEC 5P
MIL-B-81793/2(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged铬合金钢， abec 7P条 BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CHROMIUM-ALLOY STEEL, ABEC 7P
MIL-B-81793/20(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环，耐蚀钢，
abec 7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 7P
MIL-B-81793/21(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，非可分和counterbored外环对法兰方面，铬合金钢，
abec 5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NON-SEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CHROMIUM-ALLOY STEEL, ABEC 5P
MIL-B-81793/22(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，非可分和counterbored外环对法兰方面，铬合金钢，
abec 7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NON-SEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CHROMIUM-ALLOY STEEL, ABEC 7P
MIL-B-81793/23(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，非可分和counterbored外环对法兰方面，耐蚀钢，
abec 5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NON-SEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CORROSION RESISTANT STEEL, ABEC 5P
MIL-B-81793/24(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，非可分和counterbored外环对法兰方面，耐蚀钢，
abec 7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, FLANGED, NON-SEPARABLE AND COUNTERBORED OUTER
RING ON FLANGE SIDE, CORROSION RESISTANT STEEL, ABEC 7P
MIL-B-81793/25(1) 轴承，球，环形，仪器及精密旋转部件，角接触， unflanged ，可分离和加强内环，铬合金钢， abec
5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 5P
MIL-B-81793/26(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，铬合金钢， abec
7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 7P
MIL-B-81793/27(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，可分离和加强内环，耐蚀钢， abec
5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 5P
MIL-B-81793/28(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，耐蚀钢， abec
7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 7P
MIL-B-81793/29(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，可分，并加强内环，铬合金钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, ANGULAR
CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY STEEL,
ABEC 5P
MIL-B-81793/3(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，耐蚀钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 5P
MIL-B-81793/30(1) 轴承，球，环形，仪器及精密旋转部件，角接触，法兰，可分，并加强内环，铬合金钢， abec 7P条 BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, ANGULAR
CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY STEEL,
ABEC 7P
MIL-B-81793/31(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，可分，并加强内环，耐蚀钢， abec 5p BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, ANGULAR
CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION RESISTANT
STEEL, ABEC 5P
MIL-B-81793/32(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触，法兰，可分，并加强内环，耐蚀钢， abec 7P条 BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, ANGULAR
CONTACT, FLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION RESISTANT
STEEL, ABEC 7P
MIL-B-81793/33(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非分离，并加强内环，铬合金钢， abec
5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 5P
MIL-B-81793/34(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非分离，并加强内环，铬合金钢， abec
7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 7P
MIL-B-81793/35(1) 轴承，钢球，环形，仪器及精密组件旋转，角接触， unflanged非可分，并加强内环，耐蚀钢， abec
5p BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 5P
MIL-B-81793/36(1) 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非分离，并加强内环，耐蚀钢， abec
7P条 BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 7P
MIL-B-81793/4(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，耐蚀钢， abec 7P条 BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 7P
MIL-B-81793/5(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，铬合金钢， abec 5p BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CHROMIUM-ALLOY STEEL, ABEC 5P
MIL-B-81793/6(1) 同时，球，环形，仪器及精密旋转部件，深沟，法兰，铬合金钢， abec 7P条 BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CHROMIUM-ALLOY STEEL, ABEC 7P
MIL-B-81793/7(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，耐蚀钢， abec 5p BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CORROSION RESISTANT STEEL, ABEC 5P
MIL-B-81793/8(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，耐蚀钢， abec 7P条 BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CORROSION RESISTANT STEEL, ABEC 7P
MIL-B-81793/9(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，内环延长，铬合金钢， abec 5p
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
DEEP GROOVE, UNFLANGED, INNER RING EXTENDED, CHROMIUM-ALLOY STEEL, ABEC
5P
MIL-B-81793D(1) SUP 1 轴承，钢球，环形，仪器及精密旋转部件 BEARINGS, BALL, ANNULAR, FOR
INSTRUMENTS AND PRECISION ROTATING COMPONENTS
MIL-B-913(1) SUP 1 轴承，钢球，环形，仪器及精密旋转部件（公制） ，一般规格 BEARINGS, BALL, ANNULAR,
FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS (METRIC), GENERAL SPECIFICATION
FOR
MIL-B-913/1 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，铬合金钢， abec 5p （公制） BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CHROMIUM-ALLOY STEEL, ABEC 5P (METRIC)
MIL-B-913/10 轴承，球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环，铬合金钢，
abec 7P条（公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CHROMIUM-ALLOY STEEL, ABEC 7P (METRIC)
MIL-B-913/11 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环，耐蚀钢，
abec 5p （公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/12 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环，耐蚀钢，
abec 5p （公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CORROSION RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/13 轴承，球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，铬合金钢， abec 5p
（公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 5P (METRIC)
MIL-B-913/14 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，铬合金钢， abec 7P条（公制）
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CHROMIUM-ALLOY
STEEL, ABEC 7P (METRIC)
MIL-B-913/15 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，耐蚀钢， abec 5p
（公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/16 轴承，球，环形，仪器及精密旋转部件，角接触， unflanged ，可分，并加强内环，耐蚀钢， abec 5p （公制）
BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS,
ANGULAR CONTACT, UNFLANGED, SEPARABLE AND STEPPED INNER RING, CORROSION
RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/2 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，铬合金钢， abec 7P条（公制） BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CHROMIUM-ALLOY STEEL, ABEC 7P (METRIC)
MIL-B-913/3 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，耐蚀钢， abec 5p （公制） BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/4(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟， unflanged ，耐蚀钢， abec 7P条（公制） BEARING,
BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP
GROOVE, UNFLANGED, CORROSION RESISTANT STEEL, ABEC 7P (METRIC)
MIL-B-913/5(1) 轴承，球，环形，仪器及精密旋转部件，深沟，法兰，铬合金钢， abec 5p （公制） BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CHROMIUM-ALLOY STEEL, ABEC 5P (METRIC)
MIL-B-913/6(1) 轴承，球，环形，仪器及精密旋转部件，深沟，法兰，铬合金钢， abec 7P条（公制） BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CHROMIUM-ALLOY STEEL, ABEC 7P (METRIC)
MIL-B-913/7(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，耐腐蚀钢材， abec 5p （公制） BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CORROSION-RESISTANT STEEL, ABEC 5P (METRIC)
MIL-B-913/8(1) 轴承，钢球，环形，仪器及精密旋转部件，深沟，法兰，耐腐蚀钢材， abec 7P条（公制） BEARING, BALL,
ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE,
FLANGED, CORROSION-RESISTANT STEEL, ABEC 7P (METRIC)
MIL-B-913/9 轴承，钢球，环形，仪器及精密旋转部件，角接触， unflanged ，非可分和counterbored外环，铬合金钢，
abec 5p （公制） BEARING, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING
COMPONENTS, ANGULAR CONTACT, UNFLANGED, NON-SEPARABLE AND COUNTERBORED
OUTER RING, CHROMIUM-ALLOY STEEL, ABEC 5P (METRIC)
AN942 BEARING, PLAIN, HEAVY DUTY, SELF ALIGNING, AIRFRAME
AN943 REV A NOT 1 BEARING - ROD END, INTERNAL THREAD, SELF - ALIGNING,
PLAIN, AIRFRAME (NO S/S DOCUMENT)
AN947 REV A NOT 2 BEARING - ROD END, EXTERNAL THREAD, SELF-ALIGNING, PLAIN,
AIRFRAME (NO S/S DOCUMENT)
FF-B-195 NOT 1 BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) (NO S/S DOCUMENT)
MIL-B-13501D NOT 2 BEARINGS AND BUSHINGS, BRASS AND BRONZE, MACHINED OR
FORMED
MIL-B-13506C NOT 1 BEARING, SLEEVE (STEEL-BACKED) (S/S BY A-A-52401)
MIL-B-22852(2) NOT 1 BOND TESTING, BABBITT LINED BEARINGS (S/S BY DOD-STD-2183)
MIL-B-25870A BEARING, SINTERED METAL, PROCESSING OF
MIL-B-5628 BEARINGS, PLAIN, AIRFRAME (S/S BY MIL-B-8976)
MIL-B-5629 NOT 1 BEARINGS, ROD END, PLAIN, AIRFRAME (NO S/S DOCUMENT)
MIL-B-5687D(1) NOT 3 BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL
POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR
MIL-B-81819/1 NOT 1 BEARING, PLAIN, SLIDING SPHERICAL, SELF LUBRICATING,
SELF ALIGNING, HIGH SPEED OSCILLATION (NO S/S DOCUMENT)
MIL-B-81819B NOT 1 BEARING, PLAIN, (SELF-ALIGNING, SLEEVE AND THRUST)
SELF-LUBRICATING, HIGH SPEED OSCILLATION (NO S/S DOCUMENT)
MIL-B-81820/1A NOT 1 BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING,
LINED BORE, LOW SPEED, NARROW, GROOVED OUTER RING, -65 DEG. TO 325 DEG.
F (S/S BY SAE-AS81820/1)
MIL-B-81820/2A NOT 1 BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING,
LINED BORE, LOW SPEED, WIDE, CHAMFERED OUTER RING, -65 DEG. TO 325 DEG.
F (S/S BY SAE-AS81820/2)
MIL-B-81820/3A NOT 1 BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING,
LINED BORE, LOW SPEED, WIDE, GROOVED OUTER RING, -65 DEG. TO 325 DEG.
F (S/S BY SAE-AS81820/3)
MIL-B-81820/4A NOT 1 BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING,
LINED BORE, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. TO 325 DEG.
F (S/S BY SAE-AS81820/4)
MIL-B-81820F(2) SUP 1 NOT 1 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING,
LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR (S/S BY SAE-AS81820)
MIL-B-81934/1D NOT 1 BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, 325 DEG.
F (S/S BY SAE-AS81934/1)
MIL-B-81934/2D NOT 1 BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, 325 DEG.
F (S/S BY SAE-AS81934/2)
MIL-B-81934B NOT 1 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING,
GENERAL SPECIFICATION FOR (S/S BY SAE-AS81934)
MIL-B-81935/1B(1) NOT 1 BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,
WIDE, EXTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (S/S BY SAE-AS81935/1)
MIL-B-81935/2D(1) NOT 1 BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,
WIDE, INTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (S/S BY SAE-AS81935/2)
MIL-B-81935/3(1) NOT 2 LOCKING DEVICES (FOR ROD END BEARINGS) (SAE-AS81935/3)
MIL-B-81935/4A(1) NOT 1 BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,
NARROW, EXTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (S/S BY SAE-AS81935/4)
MIL-B-81935/5B(1) NOT 1 BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF LUBRICATING,
NARROW, INTERNALLY THREADED, -65 DEG. F TO +325 DEG. F (S/S BY SAE-AS81935/5)
MIL-B-81935A(1) NOT 1 BEARINGS, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,
GENERAL SPECIFICATION FOR (S/S BY SAE-AS81935)
MIL-B-81936(4) NOT 1 BEARINGS, PLAIN, SELF-ALIGNING (BECU BALL, CRES RACE)
GENERAL SPECIFICATION FOR (S/S BY SAE-AS81936)
MIL-B-81936/1B NOT 1 BEARING, PLAIN, SELF-ALIGNING, BE CU BALL, CRES RACE,
(WITH STACKING GROOVE) -65 DEG. F TO +350 DEG. F (S/S BY SAE-AS81936/1)
MIL-B-81936/2B NOT 1 BEARING, PLAIN, SELF-ALIGNING, BE CU BALL, CRES RACE,
-65 DEG. F TO +350 DEG. F (S/S BY SAE-AS81936/2)
MIL-B-85598 BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR
MIL-B-8942A(2) BEARINGS, PLAIN, TFE LINED, SELF-ALIGNING
MIL-B-8943A(3) BEARING, JOURNAL - PLAIN AND FLANGED, TFE LINED
MIL-B-8948A(1) BEARING, PLAIN, ROD END, TFE LINED, SELF-ALIGNING
MIL-B-8976(4) NOT 1 BEARINGS, PLAIN, SELF-ALIGNING, ALL-METAL (S/S BY
SAE-AS8976)
MIL-STD-1762 NOT 1 BEARINGS AND BUSHINGS, PLAIN, PREFERRED FOR DESIGN,
LISTING OF (NO S/S DOCUMENT)
MS14101J NOT 1 BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED,
NARROW, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (S/S BY SAE-AS14101)
MS14102J NOT 1 BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED,
WIDE, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (S/S BY SAE-AS14102)
MS14103J NOT 1 BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED,
WIDE, GROOVED OUTER RING, -65 DEG. TO 325 DEG. F (S/S BY SAE-AS14103)
MS14104J NOT 1 BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED,
NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (S/S BY SAE-AS14104)
MS14237A NOT 1 BUSHING, SLEEVE PLAIN, PRESS FIT, REAM TYPE (S/S BY SAE-AS14237)
MS14238A NOT 1 BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE (S/S BY SAE-AS14238)
MS17795A NOT 2 BEARING, SLEEVE, PLAIN TYPE, SINTERED BRONZE, OIL IMPREGNATED
MS17796B(1) BEARING, SLEEVE, FLANGED, SINTERED BRONZE, OIL IMPREGNATED
MS21154F NOT 1 BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING (S/S
BY SAE-AS21154)
MS21155B NOT 2 BEARING, PLAIN, SELF ALIGNING (S/S BY SAE-AS21155)
MS21230B NOT 2 BEARING, PLAIN, SELF - ALIGNING, GROOVED OUTER RING TFE
LINED, WIDE (S/S BY SAE-AS21230)
MS21231B NOT 2 BEARING, PLAIN, SELF-ALIGNING, TFE LINED, WIDE (S/S BY
SAE-AS21231)
MS21232A NOT 2 BEARING, PLAIN, SELF-ALIGNING, GROOVE OUTER RING, TFE LINED,
NARROW (S/S BY SAE-AS21232)
MS21233B NOT 2 BEARING, PLAIN, SELF-ALIGNING, TFE LINED, NARROW (S/S BY
SAE-AS21233)
MS21240D NOT 1 BEARING, SLEEVE, PLAIN, TFE LINED (S/S BY SAE-AS81934/1)
MS21241D NOT 1 BEARING, SLEEVE, FLANGED, TFE LINED (S/S BY SAE-AS81934/2)
MS21242D BEARING, PLAIN, ROD END, SELF-ALIGNING, TFE LINED, EXTERNALLY
THREADED
MS21243C NOT 1 BEARING, PLAIN, ROD END, SELF ALIGNING, TFE LINED, INTERNALLY
THREADED (S/S/ BY SAE-AS81935/2)
MS21782 NOT 1 BEARING, SLEEVE, PLAIN, SINTERED IRON BASE, OIL IMPREGNATED
(NO S/S DOCUMENT)
MS21783 NOT 2 BEARING, WASHER, THRUST, SINTERED BROZE, OIL IMPREGNATED
MS24315 NOT 3 COUPLING FLANGE, ROUND HUB (NO S/S DOCUMENT)
MS27050 NOTES, BEARING - GENERAL INFORMATION
MS35450B BEARING, JEWEL; BAR HOLE (NO S/S DOCUMENT)
MS35451B BEARING, JEWEL, CENTER BAR HOLE (NO S/S DOCUMENT)
MS35452B BEARING, JEWEL, OLIVE HOLE (NO S/S DOCUMENT)
MS35453B BEARING, JEWEL, OLIVE HOLE (CONE CUT) (NO S/S DOCUMENT)
MS35454B BEARING, JEWEL, END STONE (NO S/S DOCUMENT)
MS35688A NOT 2 V - BEARING (SPRING, LOADED THROW OUT TYPE)
MS35771C NOT 1 BEARING, SLEEVE: PLAIN, BRONZE (S/S BY FF-B-195)
MS35772C NOT 1 BEARING, SLEEVE: FLANGED, COPPER ALLOY (S/S BY FF-B-195)
MS35794A NOT 2 BEARING, SLEEVE, STEEL-BACKED BIMETAL, SPLIT TYPE,ONE PIECE
QPL-5629-1 NOT 1 BEARING, ROD END, PLAIN, AIRFRAME (NO S/S DOCUMENT)
QPL-81820-26 NOT 1 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW
SPEED OSCILLATION (S/S BY QPL-AS81820-1)
QPL-81934-11 NOT 1 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
(S/S BY QPL-AS81934)
QPL-81935-14 NOT 1 BEARINGS, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING
(S/S BY QPL-AS81935)
QPL-81936-9 NOT 1 BEARINGS, PLAIN, SELF-ALIGNING (BE-CU BALL, CRES RACE),
GENERAL SPECIFICATION FOR (S/S BY QPL-SAE-AS81936)
QPL-8976-10 NOT 1 BEARINGS, PLAIN, SELF- ALIGNING, ALL- METAL (S/S BY
QPL-SAE-AS8976)
SAE-AMS4815 BEARINGS, SILVER PLATED STEEL BACK
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
