〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
GGG-P-00770A
NOT 1 PULLER, FUSE (NO S/S DOCUMENT)
GGG-P-00785A(1) PULLER, MECHANICAL, (POST, MANUALLY-OPERATED)
GGG-P-00788 NOT 1 PULLER, MECHANICAL, WATCH AND CLOCK HAND (NO S/S DOCUMENT)
GGG-P-151A NOT 1 PEAVY (S/S BY A-A-3031 AND A-A-3032)
GGG-P-15A PACKING TOOLS, EXTRACTING AND TAMPING; STUFFING BOX PACKING
AND LANTERN GLANDS (S/S BY GGG-E-950)
GGG-P-471E NOT 1 PLIERS, PLIERS, SLIP JOINT (NO S/S DOCUMENT)
GGG-P-480E NOT 1 PLIERS, RETAINING RING (NO S/S DOCUMENT)
GGG-P-596 POTS, FIRE, GASOLINE AND KEROSENE (S/S BY FED SPEC GGG-F-400)
GGG-P-611C NOT 1 POT, MELTING, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
GGG-P-643A NOT 1 PULLER KIT, MECHANICAL (NO S/S DOCUMENT)
GGG-P-643A(I1) NOT 1 PULLER KIT, MECHANICAL (NO S/S DOCUMENT)
GGG-P-655B NOT 1 PRICKER, SAILMAKER'S (NO S/S DOCUMENT)
GGG-P-655B(I1) NOT 1 PRICKER, SAILMAKER'S (NO S/S DOCUMENT)
GGG-P-781E NOT 1 PULLER, MECHANICAL PULLER ATTACHMENT, MECHANICAL, AND
PULLER SET, MECHANICAL (NO S/S DOCUMENT)
GGG-P-791C(2) NOT 1 PULLER, NAIL, HAND (S/S BY A-A-3040)
GGG-P-831F NOT 1 PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK (NO S/S
DOCUMENT)
GGG-R-00190 REPLACER, VALVE KEY
GGG-R-00395(1) NOT 1 RIVETER, BLIND, HAND AND HEADS (S/S BY A-A-3043)
GGG-R-00620(1) NOT 1 ROLLER, HAND (RUBBER ROLLER) (S/S BY A-A-3034)
GGG-R-0080 NOT 1 RAKE (ASPHALT, ROAD) (NO S/S DOCUMENT)
GGG-R-200B NOT 1 REMOVAL TOOL, OIL FILTER (S/S BY A-A-2978)
GGG-R-400D NOT 1 RIVET, SET, HAND (NO S/S DOCUMENT)
GGG-S-00122A SCREWDRIVER, CLUTCH TIP (USE GGG-S-121)
GGG-S-00625 NOT 1 SPOON, BODY AND FENDER (NO S/S DOCUMENT)
GGG-S-0075A(1) NOT 1 SAW SET, HAND (S/S BY A-A-2968)
GGG-S-111 NOT 1 SCOOPS; SHOVELS; SPADES; AND SPOONS (NO S/S DOCUMENT)
GGG-S-121F NOT 1 SCREWDRIVER AND SCREW STARTER, HAND (NO S/S DOCUMENT)
GGG-S-125A SCREWDRIVER, FLAT TIP, (TYPEWRITER REPAIR)
GGG-S-131E(1) NOT 1 SCRIBER, MACHINISTS (S/S BY A-A-3026)
GGG-S-1408A NOT 1 SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT AND
LEFT HAND TURNING (NO S/S DOCUMENT)
GGG-S-1408A(I2) NOT 1 SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT
AND LEFT HAND TURNING (NO S/S DOCUMENT)
GGG-S-1808 NOT 1 SCREWDRIVER, JEWELERS, (SWIVEL KNOB, INTERCHANGEABLE
BLADES) (S/S BY A-A-3152)
GGG-S-190A NOT 1 SEAMER SHEET METAL, HAND (NO S/S DOCUMENT)
GGG-S-326E NOT 1 SHOVELS, SCOOPS, SPADES, SNOW PUSHERS, AND TELEGRAPH
SPOONS (NO S/S DOCUMENT)
GGG-S-731 NOT 1 STAKES, SHEET METALWORKING; AND PLATE, BENCH STAKEHOLDER
(NO S/S DOCUMENT)
GGG-S-731(I3) NOT 1 STAKES, SHEET METALWORKING; AND PLATE, BENCH STAKEHOLDER
(NO S/S DOCUMENT)
GGG-S-735/7 NOT 2 STAMPING AND MARKING EQUIPMENT; PRESS, LEAD SEAL, HAND,
REVERSIBLE TYPE (NO S/S DOCUMENT)
GGG-S-735/8 NOT 2 STAMPING AND MARKING EQUIPMENT; PRESS, LEAD SEAL, HAND,
NONREVERSIBLE TYPE (NO S/S DOCUMENT)
GGG-S-735B(1) SUP 1 NOT 1 STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION
FOR (NO S/S DOCUMENT)
GGG-S-740B NOT 1 STAND, PIPE VISE, AND VISES AND STANDS, PIPE (NO S/S
DOCUMENT)
GGG-S-75(1) NOT 1 SAW SET, HAND (S/S BY A-A-2968)
GGG-S-751A STICK, PACKING
GGG-S-775A(2) NOT 1 STUD REMOVER AND SETTER (NO S/S DOCUMENT)
GGG-T-001310 NOT 1 TAPE, FISH, STEEL (NO S/S DOCUMENT)
GGG-T-0030 NOT 1 TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR
ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) (NO S/S DOCUMENT)
GGG-T-0040A(1) NOT 1 TAMPERS, HAND (NO S/S DOCUMENT)
GGG-T-00870B(1) NOT 1 TWEEZERS, CRAFTSMAN'S (NO S/S DOCUMENT)
GGG-T-20B(3) NOT 1 TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED)
AND STAPLE, TACKER (NO S/S DOCUMENT)
GGG-T-350B NOT 1 TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON
(NO S/S DOCUMENT)
GGG-T-546 NOT 1 TONGS, BLACKSMITHS (NO S/S DOCUMENT)
GGG-T-671C NOT 1 TROWELS (NO S/S DOCUMENT)
GGG-T-870A NOT 1 TWEEZERS, CRAFTSMAN'S (NO S/S DOCUMENT)
GGG-T-870A(I2) NOT 1 TWEEZERS, CRAFTMANS (NO S/S DOCUMENT)
GGG-V-410B NOT 1 VISE, BENCH, CLAMP BASE; SHEET METAL-WORKER'S; BENCH
AND PIPE; JEWELER'S; MACHINIST'S; AND MULTIPOSITION (NO S/S DOCUMENT)
GGG-V-412B NOT 1 VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING,
TUBE (NO S/S DOCUMENT)
GGG-V-415A NOT 1 VISE, PIPE (S/S BY A-A-2980 AND A-A-3050)
GGG-V-415A(I1) NOT 1 VISE, PIPE (S/S BY A-A-2980 AND A-A-3050)
GGG-V-440A NOT 1 VISE, HANDSAW, FILING, BAND SAW FILING, AND CIRCULAR
SAW FILING (NO S/S DOCUMENT)
GGG-V-445A NOT 1 VISE, WOODWORKER'S AND PATTERNMAKER'S (S/S BY A-A-3036)
GGG-W-00645B(1) NOT 1 WRENCH, OPEN END BOX (AND BOX COMBINATION, CROWFOOT,
RATCHET, AND RATCHET CROWFOOT) (NO S/S DOCUMENT)
GGG-W-00647 NOT 1 WRENCH, BUNG, AND WRENCH, DRAIN PLUG (S/S BY A-A-3086)
GGG-W-00652 WRENCH, (KEY), SOCKET HEAD SCREW (S/S BY GGG-K-275A)
GGG-W-00656(1) WRENCH, SOCKET (SET, SPARK PLUG, HAND, INCLUDING HANDLES
AND ATTACHMENTS)
GGG-W-00675A NOT 1 WRENCH, SOCKET (SPIN TYPE, SCREWDRIVER GRIP) (NO S/S
DOCUMENT)
GGG-W-1437(1) NOT 1 WRENCH, SOCKET AND BOX END (NO S/S DOCUMENT)
GGG-W-181B NOT 1 WEDGES, TOOL HANDLE (NO S/S DOCUMENT)
GGG-W-220B(1) NOT 1 WEDGE; STEEL (NO S/S DOCUMENT)
GGG-W-2843 NOT 1 WRENCH, MICROMETER, TORQUE (NO S/S DOCUMENT)
GGG-W-340B NOT 1 WIRE TWISTER PLIER (WITH SIDE CUTTER) (NO S/S DOCUMENT)
GGG-W-631B(5) WRENCHES, ADJUSTABLE; OPEN-END, AUTO AND MONKEY (S/S BY
A-A-2344, A-A-2345, A-A-2346 AND A-A-2347)
GGG-W-636E NOT 1 WRENCH, (BOX, OPEN END, AND COMBINATION) (NO S/S DOCUMENT)
GGG-W-641E NOT 1 WRENCH, SOCKET (AND SOCKETS, HANDLES, AND ATTACHMENTS
FOR SOCKET WRENCHES, HAND) (NO S/S DOCUMENT)
GGG-W-642B NOT 1 WRENCH, BUNG, (NONSPARKING AND NONMAGNETIC) (NO S/S DOCUMENT)
GGG-W-643B NOT 1 WRENCH, PIPE, INTERNAL GRIPPING (NO S/S DOCUMENT)
GGG-W-643B(I1) NOT 1 WRENCH, PIPE INTERNAL-GRIPPING (NO S/S DOCUMENT)
GGG-W-646(3) NOT 1 WRENCH, OPEN END, RATCHET (TAC PATTERN), FOR TUBE FITTINGS,
ELECTRIC CABLE TERMINALS AND STUFFING TUBE GLAND NUTS (S/S BY A-A-3041
AND A-A-3042)
GGG-W-646(I4) NOT 1 WRENCH, OPEN END, RATCHET (TAC PATTERN), FOR TUBE
FITTINGS, ELECTRIC CABLE TERMINALS AND STUFFING TUBE GLAND NUTS (S/S BY
A-A-3041 AND 3042)
GGG-W-651E NOT 1 WRENCH, PIPE WRENCH AND BASIN WRENCH (NO S/S DOCUMENT)
GGG-W-652(1) WRENCHES, SOCKET-HEAD SCREWS (S/S BY FED SPEC GGG-K-275A)
GGG-W-653B NOT 1 WRENCH, RATCHET, REVERSIBLE (NO S/S DOCUMENT)
GGG-W-657C NOT 1 WRENCH, SOCKET (SPIN TYPE, SCREWDRIVER GRIP) (NO S/S
DOCUMENT)
GGG-W-680A(2) NOT 1 WRENCH, TAP AND REAMER, ADJUSTABLE (NO S/S DOCUMENT)
GGG-W-686E NOT 1 WRENCH, TORQUE, UNIDIRECTIONAL (S/S BY GGG-W-2843 AND
ASME-B107.14M)
GG-I-271C NOT 1 IGNITER, FRICTION, OXYACETYLENE-TORCH (S/S A-A-3033)
GG-I-271C(I1) NOT 1 IGNITER, FRICTION, OXYACETYLENE-TORCH (S/S BY A-A-3033)
JAN-C-526 COMPRESSORS, PISTON-RING, BAND TYPE
JAN-P-690 PULLER; BUSHING, BEARING, AND GEAR, INSTALLING AND REMOVING
(S/S BY GGG-P-781)
KK-P-91B NOT 1 PALMS, SEWING (SAILMAKERS AND SADDLERS) (NO S/S DOCUMENT)
LLL-B-211(1) NOT 1 BELLOWS, HAND; FOUNDRY, SECTION 4 (PART 5) (NO S/S
DOCUMENT)
LLL-M-71B NOT 2 MALLETS AND MAULS, WOOD (NO S/S DOCUMENT)
LLL-M-71B(I1) NOT 2 MALLETS AND MAULS, WOOD (NO S/S DOCUMENT)
MIL-A-15767 AWLS (USE GGG-A-891)
MIL-A-3908C(1) NOT 2 AUGER, POSTHOLE, HAND (S/S BY A-A-59219)
MIL-B-15093A BAR, DRUM UPENDING
MIL-B-18864 BENDER, ELECTRICAL CONDUIT, HAND, PORTABLE (USE GGG-B-175)
MIL-B-2678C NOT 1 BRUSHES, WIRE, BOILER TUBE, EXPANDING TYPE FOR USE WITH
ELECTRIC AND AIR MOTOR DRIVEN BOILER TUBE CLEANING OUTFITS, AND FIXED
SECTIONAL HAND TYPE (S/S BY A-A-59193)
MIL-B-2679A NOT 1 BRUSHES, WIRE, BOILER-TUBE, SECTIONAL TYPE, HANDPUSH
(S/S BY MIL-B-2678)
MIL-B-43407(1) NOT 1 BARS, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
MIL-B-6739 BATTERY, 12-VOLT, 17-AMPERE-HOUR, SHIELDED STORAGE
MIL-B-85643 SUP 1 NOT 1 BITS, SCREWDRIVER, RIBBED GENERAL SPECIFICATION
FOR (S/S BY NASM85643)
MIL-B-85643/1 NOT 1 BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, INSERT
TYPE, EXTERNAL HEXAGON SHANK, MANUALLY DRIVEN (S/S BY NASM95643/1)
MIL-B-85643/2 NOT 1 BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, LONG
SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN (S/S BY NASM85643/2)
MIL-B-85643/3 NOT 1 BIT, SCREWDRIVER, TORQ-SET, RIBBED, OFFSET CRUCIFORM,
EXTERNAL HEXAGON SHANK, POWER DRIVEN (S/S BY NASM85643/3)
MIL-B-85643/4 NOT 1 BIT, SCREWDRIVER, TORQ-SET, RIBBED, OFFSET CRUCIFORM,
LONG SHANK, EXTERNAL HEXAGON SHANK (S/S BY NASM85643/4)
MIL-B-85643/5 NOT 1 BIT, SCREWDRIVER, INSERT TYPE, TORQ-SET, RIBBED, OFFSET
CRUCIFORM, EXTERNAL HEXAGON SHANK, MANUALLY DRIVEN (S/S BY NASM85643/5)
MIL-B-920C(2) NOT 2 BARS, BUCKING, RIVET (S/S BY A-A-52123)
MIL-B-951 NOT 1 BENDER, TUBE, MULTIPLE BEND, MANUAL (S/S BY GGG-B-191)
MIL-B-9946/10 NOT 1 BIT, SCREWDRIVER, SIX SPLINE, STRAIGHT, EXTERNAL HEX
SHANK, MANUALLY DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/14 NOT 1 BIT, SCREWDRIVER, SLOT, EXTERNAL HEX SHANK, MANUALLY
DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/15 NOT 1 BIT, SCREWDRIVER, PHILLIPS RIBBED, EXTERNAL HEX SHANK,
MANUALLY DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/16 NOT 1 BIT, SCREWDRIVER, TORQ-SET, RIBBED, EXTERNALHEX SHANK,
MANUALLY DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/1B NOT 1 BIT, SCREWDRIVER, HI-TORQUE, TYPE I (NO S/S DOCUMENT)
MIL-B-9946/2 NOT 1 BIT, SCREWDRIVER, HI TORQUE, TYPE II (NO S/S DOCUMENT)
MIL-B-9946/3A NOT 1 BIT, SCREWDRIVER, PHILLIPS (NO S/S DOCUMENT)
MIL-B-9946/4A NOT 1 BIT, SCREWDRIVER, TORQ SET (NO S/S DOCUMENT)
MIL-B-9946/5 NOT 1 BIT, SCREWDRIVER, HI-TORQUE, TYPE V (NO S/S DOCUMENT)
MIL-B-9946/9 NOT 1 BIT, SCREWDRIVER, HEX, EXTERNAL HEX SHANK, MANUALLY
DRIVEN (NO S/S DOCUMENT)
MIL-B-9946E(1) NOT 1 BITS, SCREWDRIVER, GENERAL SPECIFICATION FOR (NO
S/S DOCUMENT)
MIL-C-0022520/5E NOT 1 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION,
LARGE FOR COAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES
AND END CAPS (NO S/S DOCUMENT)
MIL-C-11736A ALIGNING TOOL, TREADWAY (NO SUPERSEDING DOCUMENT)
MIL-C-1425 CLEANER, GENERATOR, FOR RANGE, FIELD, M-1937
MIL-C-1429C NOT 2 CLEANER, BURNER SLOT, FOR RANGE, FIELD, M-1937 (NO S/S
DOCUMENT)
MIL-C-15899A COMBS, GRAINING
MIL-C-1752 JACK, WAGON
MIL-C-19482C(3) NOT 1 CARRIER, STORAGE BATTERY, HAND (USE GGG-C-1968)
MIL-C-22520/25 NOT 1 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED,
WIRE TERMINATION, TOOL, FOR CRIMP STYLE ELECTRIC TERMINALS TYPE I, CLASS
1 TERMINALS UNDER MIL-T-7928 AND MIL-E-16366 (NO S/S DOCUMENT)
MIL-C-28876/19 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, INSPECTION
TOOL (S/S BY MIL-I-81969/46)
MIL-C-28876/20 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, REMOVAL
TOOL (S/S BY MIL-I-81969/47)
MIL-C-28876/21 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, ALIGNMENT
SLEEVE (S/S BY MIL-I-81969/48)
MIL-C-28876/22 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, FIXTURE
ASSEMBLY, POLISHING TOOL (S/S BYMIL-T-83523/6)
MIL-C-28876/23 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, INSTALLATION
TOOL,RETAINING BAND (S/S BYMIL-T-83523/5)
MIL-C-28876/24 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, ADAPTER
KIT TORQUEWRENCH, BACKSHELL STRAIN RELIEF (S/S BY MIL-T-83523/7)
MIL-C-28876/25 NOT 1 CONNECTORS, FIBER OPTIC, ENVIRONMENT RESISTING, WRENCH
SPANNER, STRAIN RELIEF AND NON-STRAIN RELIEF (S/S BY MIL-T-83523/8)
MIL-C-40091 CRIMPING TOOL, TERMINAL, HAND
MIL-C-418A CRIMPER, CAP, M2 (USE MIL-C-43438)
MIL-C-426B CARRIER, TIMBER, HAND (NO S/S DOCUMENT)
MIL-C-45806 COMPRESSOR, PISTON RING, OPEN CLAMP, ADJUSTABLE (USE GGG-C-555)
MIL-C-55302/105 NOT 1 CONNECTOR, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES,
CONTACT INSERTION TOOL, FOR FORK TYPE, CRIMP REMOVEABLE CONTACTS (S/S
BYMIL-I-81969/5)
MIL-C-55302/106 NOT 1 CONNECTOR, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES,
CONTACT REMOVAL TOOL, FOR FORK TYPE, CRIMP REMOVABLE CONTACTS (S/S BY
MIL-I-81969/4)
MIL-D-11586D NOT 3 DRIVER, ARMATURE WEDGE (NO S/S DOCUMENT)
MIL-D-16139(1) DRIFTS, DRILL (USE GGG-D-641)
MIL-D-1801 DIPPERS, (STEEL, HOT TINNER, GRADUATED) (SUPERSEDES JQD 163B)
MIL-D-43041 DRIVERS, BEARING AND BUSHING
MIL-D-52353A NOT 2 DRIFTPINS: STEEL (NO S/S DOCUMENT)
MIL-E-15832C(1) NOT 1 EXPANDER, HOSE EXPANSION RING, BENCH TYPE (NO S/S
DOCUMENT)
MIL-F-3113D(1) NOT 2 FID (S/S BY A-A-52129)
MIL-F-4530A FORCEPS, SHEET HOLDER, STRAIGHT TYPE (USE GGG-F-570)
MIL-F-4560 FLARING TOOL, TUBE, HAND OPERATED, HAMMER TYPE, DESIGNED FOR
5-16 INCH TUBING, DOUBLE LAP (SUPERSEDES 50448)
MIL-F-4571B FINGERS, MECHANICAL AND RETIEVING TOOL, MAGNETIC (USE GGG-F-360B)
MIL-G-12434A GRIP, CABLE, JAW, WEDGE AND ROLLER TYPE (USE RR-G-700B)
MIL-G-160A(1) GRIP, CABLE (NAVAL SHIPBOARD USE)
MIL-G-16567D NOT 1 GRIP, CABLE (NO S/S DOCUMENT)
MIL-G-19721(1) GENERATOR AND MOTOR, DIRECT CURRENT, SUBMARINE PROPULSION
SERVICE
MIL-G-3210A GRIP, CABLE, JAW (USE RR&G&691)
MIL-H-1431B NOT 3 HAMMER, HAND (PITON, MOUNTAIN) (S/S BY A-A-50096)
MIL-H-18745C(2) HAMMER, HAND, NONSPARKING AND NON-MAGNETIC
MIL-H-19462 HAMMER, HAND, AUTOMOTIVE
MIL-H-20206B NOT 1 HEATING TORCHES, FUEL OIL BURNING, PORTABLE (NO S/S
DOCUMENT)
MIL-H-20638B(1) NOT 1 HOOK, CANT (NO S/S DOCUMENT)
MIL-H-2228 HAMMER, STUNNING, 4 POUND
MIL-H-2814E NOT 2 HOOK, MATERIALS HANDLING, HAND, MEAT: AND HOOKS, MEAT
HANGING (NO S/S DOCUMENT)
MIL-H-3663B NOT 1 HAMMER, HAND (OPTICAL) (S/S BY A-A-53193)
MIL-H-4034C HANDLE, TORQUE INDICATING (USE GGG-W-686)
MIL-H-43118 HAMMER, IMPACT, MANUAL FOR DRIVING 4 INCH, 6 INCH AND 8 INCH
ARROWHEAD GROUND ANCHORS
MIL-H-52802 NOT 1 HOOK, STEEL: BOLTED TANK ERECTION (NO S/S DOCUMENT)
MIL-H-795A HOLDER, SHEET METAL, HOLE AND EDGE GRIP (USE GGG-H-575)
MIL-I-0081969/28B NOT 1 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL
CONTACTS, TYPE II, CLASS 2, COMPOSITION C (NO S/S DOCUMENT)
MIL-I-0081969/30B NOT 1 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 2, COMPOSITION C, FOR UNWIRED CONTACTS (NO S/S
DOCUMENT)
MIL-I-11519C(2) INTRENCHING TOOL, HAND (USE MIL-I-43684)
MIL-I-1239 IGNITERS, OXYACETYLENE-TORCH (USE GG-I-271)
MIL-I-1281A IGNITER, WP OR NA, M15 OR M16 (EXPLOSIVE TYPE)
MIL-I-1751 IRON, BRANDING
MIL-I-43684B NOT 1 INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT (S/S BY
A-A-59337)
MIL-I-81969/24 NOT 1 INSTALLING AND REMOVAL TOOL, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 2, COMPOSITION A OR C (NO S/S DOCUMENT)
MIL-I-81969/35 NOT 1 INSTALLING AND REMOVAL TOOL, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 3, COMPOSITION A (NO S/S DOCUMENT)
MIL-I-81969/36 NOT 1 INSTALLING AND REMOVAL TOOL, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 1, COMPOSITION A (NO S/S DOCUMENT)
MIL-I-81969/37 NOT 1 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 1, COMPOSITION A (NO S/S DOCUMENT)
MIL-I-81969/38 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT,
TYPE II, CLASS 3, COMPOSITION A.
MIL-I-81969/40 NOT 2 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS 1, COMPOSITION B (NO S/S DOCUMENT)
MIL-I-81969/41 NOT 2 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL
CONTACT, TYPE II, CLASS I, COMPOSITION C (NO S/S DOCUMENT)
MIL-I-81969/42 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT,
TYPE III, CLASS I, COMPOSITION A (NO S/S DOCUMENT)
MIL-J-13193A JACK LC-13 AND AXLE LC-31 (FOR CABLE REEL LIFTING AND SUPPORTING)
(USE FEDERAL SPECIFICATION GGG-J-51,
MIL-J-18594 JACK, HAND, HYDRAULIC (AXLE)
MIL-J-18595 JACK, HAND, HYDRAULIC (TRIPOD WING)
MIL-J-45075A JACK KITS, HYDRAULIC, HAND (USE GGG-J-60)
MIL-J-4975 NOT 1 JACK, HAND, HYDRAULIC, AXLE, 7 TON CAP., TYPE MC-1 (NO
S/S DOCUMENT)
MIL-J-7821 JACKS, 3 STAGE, AXLE (12 TON)
MIL-K-20649 KNIFE, PH-50
MIL-K-21120B NOT 1 KEY, SOCKET HEAD SCREW, HEXAGON, NONSPARKING AND NONMAGNETIC
(NO S/S DOCUMENT)
MIL-K-934A KEY, COWL FASTENER (USE GGG-K-266)
MIL-L-18947B(1) NOT 3 LAPPERS, POPPET VALVE, HAND POWERED (S/S BY A-A-59221)
MIL-M-15926B NOT 1 MARLINESPIKE (NO S/S DOCUMENT)
MIL-M-16944 MARKER, STITCH SPACING
MIL-M-17476A MOLDER TOOL, LIFTER, SLICK, TROWEL AND SPOON
MIL-N-43186A(2) NOT 1 NEEDLE, ETCHING, HAND (NO S/S DOCUMENT)
MIL-O-5686 PULLEY, GREASE LUBRICATED ANTI FRICTION BEARING CONTROL
MIL-P-0016208E NOT 1 PUNCHES AND DIES, GROMMET INSERTING (NO S/S DOCUMENT)
MIL-P-1215C NOT 3 PINCH-OFF TOOL, TUBING (NO S/S DOCUMENT)
MIL-P-12415 PIKE, POLE, 8-AND 16-FOOT (S/S BY MIL-P-43116A)
MIL-P-1382A(1) POT, FIRE, GASOLINE (USE GGG-P-596)
MIL-P-14546 PULLER, MECHANICAL, AUTOMOTIVE ELECTRICAL COMPONENTS
MIL-P-15977B(1) PULLER, AND TEST LIGHT, FUSE (USE W-P-796)
MIL-P-16208D(1) NOT 1 PUNCH AND DIE, GROMMET INSERTING (NO S/S DOCUMENT)
MIL-P-16697A PLIERS, PUNCH, OPHTHALMIC LENS
MIL-P-17485A BRUSH, WATER, MOLDER S (NAVY)
MIL-P-1753 PLIERS, PINCERS, SADDLERS
MIL-P-18488B PULLERS, FUSE (USE W-P-796)
MIL-P-18724A PULLER, RATCHET-LEVER, CABLE TYPE, HAND OPERATED, 3000 POUND
CAPACITY
MIL-P-19827 PIKE POLE, 10-AND 14-FOOT (S/S BY MIL-P-43116A)
MIL-P-2000 PINCERS, BLACKSMITHS, SHOEING
MIL-P-22372A NOT 1 PRESS, GROMMET AND EYELET AND SNAP FASTENER SETTING,
BENCH MOUNTED, FOOT OPERATED (NO S/S DOCUMENT)
MIL-P-40090 PULLER, STEERING WHEEL
MIL-P-40103 PLIERS, BRAKE REPAIR (FOR REMOVING AND REPLACING BRAKE SHOE
SPRINGS).
MIL-P-43116A(2) NOT 1 PIKE, WIRE AND PIKES, POLE (NO S/S DOCUMENT)
MIL-P-9938 PRESS, LEAD SEAL, HAND, AND DIES
MIL-P-9952 PIN STRAIGHTENERS, ELECTRON TUBE, MINIATURE TYPE (USE GGG-P-00340)
MIL-R-1731 CLAMPS, SADDLER S STITCHING
MIL-R-17736A RAMMER, MOLDER S HAND, FOUNDRY
MIL-R-43040B(2) NOT 2 REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT (NO
S/S DOCUMENT)
MIL-R-45067 RETRIEVING TOOL, MAGNETIC (USE GGG-F-360)
MIL-S-1255 STAKES AND PLATES (BENCH), COPPERSMITHS , TINSMITHS , AND SHEET-METAL-WORKERS
MIL-S-1485A SHOVEL, HAND, FIRE
MIL-S-15825A(1) NOT 3 SCRIBER, DIAMOND POINT (S/S BY A-A-52209)
MIL-S-17044 NOT 1 SCREWDRIVER, REVERSIBLE (NO S/S DOCUMENT)
MIL-S-18190A SMOOTHING IRONS, ASPHALT, AND HEATER, ASPHALT TOOL (USE MIL-S-28565)
MIL-S-19106C NOT 1 SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT AND
LEFT HAND TURNING (S/S BY GGG-S-1408)
MIL-S-21111C(1) NOT 1 SCREWDRIVERS, FLAT TIP, OFFSET, AND CROSSTIP&NONSPARKING
AND NONMAGNETIC (NO S/S DOCUMENT)
MIL-S-28565A NOT 1 SMOOTHING IRONS, ASPHALT, SELF-HEATING,IMETHYLACETYLENE-PROPADIENE
GAS FIRED (NO S/S DOCUMENT)
MIL-S-330A NOT 1 STICK, CRUISER, TIMBER (NO S/S DOCUMENT)
MIL-S-446B NOT 1 SPOON, MINER'S (NO S/S DOCUMENT)
MIL-S-45179B NOT 2 STITCHERS, CEMENTING AND VULCANIZING, AND ROLLERS,
HAND (NO S/S DOCUMENT)
MIL-S-4567 SCREWDRIVERS, RATCHET, OFFSET, COMMON AND CROSSPOINT
MIL-S-4998 SWAGER, ARMORED CABLE TERMINAL 1-8 INCH, TYPE A&1
MIL-S-6180B(1) NOT 2 SWAGING TOOLS, FLEXIBLE CABLE TERMINAL, HAND-OPERATED
(NO S/S DOCUMENT)
MIL-STD-1646B NOT 1 SERVICING TOOLS FOR ELECTRIC CONTACTS AND CONNECTIONS,
SELECTION AND USE OF (NO S/S DOCUMENT)
MIL-STD-230A WRENCH, OPEN END, ADJUSTABLE, WRENCH, AUTO, ADJUSTABLE, AND
WRENCH, MONKEY, CLASSIFICATION OF DEFECTS FOR
MIL-STD-231 WRENCH, OPEN END, FIXED, AND WRENCH, BOX, CLASSIFICATION OF
DEFECTS FOR
MIL-STD-247 SCREW-DRIVERS AND SCREW-HOLDERS (STARTERS), CLASSIFICATION
OF DEFECTS FOR
MIL-T-11591D(1) NOT 2 TAMPER, ARMATURE COIL WINDING (NO S/S DOCUMENT)
MIL-T-14143 TOOLS, SETTING, FOR SNAP FASTENERS AND EYELETS
MIL-T-21309E NOT 2 TOOLS FOR INSERTING AND EXTRACTING HELICAL COIL WIRE
SCREW THREAD INSERTS (S/S BY A-A-59158)
MIL-T-22910/1C TOOL, HAND, KIT CASE, FOR 22910/2 AND 22910/3 CRIMPING
TOOLS AND DIES (S/S BY MIL-T-22910/6A)
MIL-T-22910/2C TOOL, HAND, EIGHT INCH, WITH REMOVABLE DIE, FOR TWO PIECE
SHIELD TERMINATING FERRULE (S/S BY MIL-T-22910/7A)
MIL-T-22910/3C TOOL, HAND, TWELVE INCH, WITH REMOVABLE DIES FOR TWO PIECE
SHIELD TERMINATING FERRULES (S/S BY MIL-T-22910/7A)
MIL-T-22910/6A TOOL, KIT CASE FOR 22910/7 CRIMPING TOOLS AND DIES (S/S
BY MIL-C-22520/9)
MIL-T-22910/7B NOT 1 TOOL, HAND, 10.75 INCH, WITH REMOVEABLE DIES FOR
TWO PIECE SHIELD TERMINATING PERRULES (S/S BY MIL-C-22520/5)
MIL-T-22910C(1) NOT 1 TOOL, CRIMPING, HAND, FOR CRIMP STYLE ELECTRIC TERMINAL
AND SHIELD FERRULE (NO S/S DOCUMENT)
MIL-T-4572 TOOL, INSERTING, TIRE VALVE STEM (SUPERSEDES 50484)
MIL-T-45832(1) TESTER, SPRING, RESILIENCY (FOR DISTRIBUTOR BREAKER ARMS
AND GENERATOR AND STARTING MOTOR BRUSHES SPRING TENSION) (S/S BY MIL-T-43560)
MIL-T-4901 TOOL, IGNITION CABLE FERRULE CRIMPER, TYPE A&1 (SUPERSEDES
50480)
MIL-T-55619(1) NOT 1 TOOL, CRIMPING, FOR COAXIAL, RADIO FREQUENCY, CONNECTORS,
GENERAL SPECIFICATION FOR (S/S BY MIL-C-22520 NOW MIL-DTL-22520)
MIL-T-55619/1 TOOL, CRIMPING, FOR COAXIAL, RADIO FREQUENCY, CONNECTORS
(STYLE 2) (S/S BY MIL-C-22520/5C)
MIL-T-82070B NOT 1 TIRE IRON, TIRE AND RIM SERVICING (NO S/S DOCUMENT)
MIL-T-83508 SUP 1 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED,
WIRE TERMINATION, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
MIL-T-83508/1 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPE 2, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/10 NOT 1 TOOK, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPES 1, 2, 3, AND 4, (WRAP SLEEVE), FOR WRAPPING (NO S/S
DOCUMENT)
MIL-T-83508/11 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPES 5, FOR UNWRAPPING (NO S/S DOCUMENT)
MIL-T-83508/3 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPE 2, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/5 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPE 1, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/7 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPE 4, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/8 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPE 5, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/9 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE
TERMINATION, TYPES 1, 2, 3, AND 4, (WRAPPING BITS), FOR WRAPPING (NO S/S
DOCUMENT)
MIL-T-83724 TOOL, CRIMPING, CONTACT, ELECTRIC CONNECTOR (USE MIL-C-22520)
MIL-T-9935 TACKER, LEVER, HAND OPERATED (USE GGG-T-20)
MIL-V-1615 VISE, SKI
MIL-W-10442 NOT 1 WRENCHES, SPANNER & HYDRANT (S/S BY GGG-W-665)
MIL-W-10698C(1) NOT 2 WRENCH, OPEN END, AND WRENCH ASSEMBLY, STAMPED STEEL
(S/S BY A-A-59220)
MIL-W-10812A WRENCHES, RANGE, FIELD, M&1937
MIL-W-12307C NOT 2 WRENCH, VALVE-REMOVING, M1 AND M2
MIL-W-13124 WRENCH, TORQUE INDICATING (USE GGG-W-686)
MIL-W-15674 WRENCHES, ADJUSTABLE, BOLT AND NUT (S/S BY GGG-W-631)
MIL-W-17912C NOT 1 WRENCH, OPEN-END ADJUSTABLE, AND WRENCH, MONKEY, NONSPARKING
AND NONMAGNETIC (NO S/S DOCUMENT)
MIL-W-19288 WRENCH, BUNG (FOR STEEL DRUMS) (USE GGG-W-644)
MIL-W-19762D(1) NOT 1 WRENCH, PIPE, NONSPARKING AND NONMAGNETIC (NO S/S
DOCUMENT)
MIL-W-19928A NOT 1 WRENCH, BOX, AND OPEN-END, FIXED, NONSPARKING AND NONMAGNETIC
(NO S/S DOCUMENT)
MIL-W-21350 WRENCHES, RIM NUT (LUG), BUNG, AND LINEMAN S (USE GGG-W-644)
MIL-W-23514A NOT 1 WRENCH, SPANNER, ADJUSTABLE HOOK, NONSPARKING AND NONMAGNETIC
(NO S/S DOCUMENT)
MIL-W-25265 WRENCH, IGNITER, ROCKET ENGINE, TYPE MC&1
MIL-W-26101A WRENCH SET, NONSPARKING
MIL-W-26497C NOT 2 WRENCH, TORQUE, SCREWDRIVER TYPE (S/S BY ASME-B107.14M)
MIL-W-2997 WRENCH, WATER JACKET DISASSEMBLING
MIL-W-40145C NOT 1 WRENCHES, CROWFOOT, SPECIAL (NO S/S DOCUMENT)
MIL-W-43005 WRENCH, TORQUE, (PRESET), FOR TUBE FITTINGS 130161
MIL-W-43105B(1) NOT 3 WRENCHES, SOCKET, WHEEL STUD NUT, DOUBLE END: AND
HANDLES, BAR (NO S/S DOCUMENT)
MIL-W-470A WRENCH, GAS&CYLINDER&VALVE AND MANIFOLD&WING&NUT
MIL-W-7114 WRENCH, SPARK PLUG ELBOW SQUARE DRIVE (USE GGG-C-1507)
MS14035B BIT, INSTALLING TOOL, CONTACT, ELECTRICAL CONNECTOR, BIT, REMOVAL
TOOL, CONTACT, ELECTRICAL CONNECTOR (NO S/S DOCUMENT)
MS14036B BIT, INSTALLING TOOL, CONTACT, ELECTRICAL CONNECTOR (NO S/S DOCUMENT)
MS14037 CRIMPING TOOL, TERMINAL HAND, ELECTRICAL CONNECTOR CONTACT, CLASS
1 (USE MIL-C-22520/4)
MS14166 NOT 1 T-WRENCH, URT-33 RADIO BEACON
MS15010A WRENCH FOR MILITARY STANDARD CUTTING TORCH
MS15218 SCREWDRIVER, FLAT TIP, CABINET STRAIGHT SIDES, PLASTIC HANDLE,
PLAIN
MS15219 SCREWDRIVER, FLAT TIP, COMMON, FLARED SIDES, PLASTIC HANDLE, DESIGN
A, SHAPE A
MS15220A SCREWDRIVER, FLAT TIP, EXTRA HEAVY DUTY, STEEL HANDLE WITH WOOD
INSERTS
MS15221 SCREWDRIVER, FLAT TIP, CLOSE QUARTER
MS15222 SCREWDRIVER, FLAT TIP, COMMON, FLARED SIDES WITH SCREW-HOLDER,
EXTERNAL GRIPPING
MS15223 SCREWDRIVER, SCREW-HOLDING, SCREW SLOT GRIPPING, PLASTIC HANDLE
MS15224 SCREWDRIVER, CROSS TIP, STRAIGHT, PHILLIPS, PLASTIC HANDLE
MS15225A SCREWDRIVER, RATCHET, COMMON, STRAIGHT
MS15226 SCREWDRIVER, RATCHET, DOUBLE SPIRAL, AUTOMATIC RETURN
MS15227 SCREWDRIVER, DOUBLE OFFSET, SINGLE FLAT TIP EACH END
MS15228 SCREWDRIVER, DOUBLE OFFSET PHILLIPS CROSS TIP EACHEND
MS15229 SCREWDRIVER, FOUR WAY OFFSET, DOUBLE FLAT TIPS EACH END
MS15230 SCREWDRIVER, JEWELERS, SWIVEL KNOB, INTERCHANGEABLE BLADES
MS15231 SCREWDRIVER, JEWELERS, NOMETALLIC HANDLE, NONREMOVABLE BLADE
MS15232 SCREWDRIVER, FLAT TIP, POCKET, REMOVABLE BLADE
MS15233 SCREWDRIVER, FLAT TIP, POCKET CLIP
MS15234 SCREWDRIVER, SPARK PLUG TESTING
MS15235A SCREWDRIVER, CROSS TIP, STRAIGHT, REED AND PRINCE,PLASTIC HANDLE
MS15236 SCREWDRIVER, DOUBLE OFFSET, REED AND PRINCE CROSS TIP EACH END
MS15259C VISE, BENCH, CLAMP BASE, (UTILITY), STATIONARY BASE
MS15260C VISE, BENCH, CLAMP BASE, (UTILITY), SWIVEL BASE
MS15261A VISE, BLACKSMITH S
MS15262A VISE, SHEETMETAL WORKER S
MS15263A VISE, BENCH AND PIPE, (SWIVEL BASE, STATIONARY JAN)
MS15264A VISE, HAND, COMBINATION BENCH AND HAND WITH BENCH CLAMP
MS15266A VISE, JEWELER S SWIVEL BASE
MS15268A VISES, MACHINIST S, SWIVEL BASE, STATIONARY JAW
MS15269A VISES, MACHINIST S SWIVEL BASE, SWIVEL JAW
MS15270A VISES, PATTERNMAKER S
MS15271A VISES, PIN, METAL HANDLE
MS15272A VISES, PIPE, CHAIN
MS15273A VISES, PIPE, HINGED JAW
MS15274A VISES, PIPE, OPEN SIDE
MS15275A VISES, WIRE ROPE SPLICING
MS15276A VISES, HANDSAW FILING (USE GGG-V-436)
MS15277A VISES, BANDSAW FILING
MS15278A VISE, WOODWORKER S QUICK ACTING
MS15380 PLIERS, BATTERY (WITHOUT CUTTER)
MS15381 PLIERS, SLIP JOINT, MULTIPLE TONGUE AND GROOVE, ANGLE NOSE (WITHOUT
CUTTER)
MS15382 PLIERS, SLIP JOINT, COMBINATION JAW STRAIGHT NOSE, REGULAR (WITH
CUTTER)
MS15383 PLIERS, SLIP JOINT, COMBINATION JAW, STRAIGHT NOSE, THIN (WITH
CUTTER)
MS15384 PLIERS, COMBINATION JAW, FLAT NOSE (WITH CUTTERS)
MS15386 PLIERS, FLAT NOSE, MEDIUM NOSE, (WITHOUT CUTTER)
MS15388 PLIERS, FLAT NOSE, WIDE NOSE (WITH CUTTER)
MS15389 PLIERS, GAS (WITHOUT CUTTER)
MS15390 PLIERS, GLASS
MS15391 PLIERS, LINEMAN S (WITH SIDE CUTTER)
MS15392 PLIERS, LINEMAN S (WITH SIDE CUTTER AND WIRE SKINNER)
MS15393 PLIERS, ROUND NOSE, ROUND JAW (WITHOUT CUTTER)
MS15394 PLIERS, ROUND NOSE (CHAIN), LONG NOSE (WITH CUTTER)
MS15396 PLIERS, ROUND NOSE (NEEDLE), CURVED NOSE (WITHOUT CUTTER) 140461
MS15397 PLIERS, ROUND NOSE (NEEDLE), STRAIGHT NOSE (WITHOUT CUTTER)
MS15398 PLIERS, PARALLEL-ACTION JAW (WITH SIDE CUTTER)
MS15432 SCREWDRIVER, FLAT TIP, COMMON, FLARED SIDES, PLASTIC HANDLE, DESIGN
A, SHAPE B
MS15433 SCREWDRIVER, FLAT TIP, COMMON, FLARED SIDES, PLASTIC HANDLE, DESIGN
B, SHAPE B
MS15434 SCREWDRIVER, SCREW-HOLDING SCREW SLOT GRIPPING, METAL HANDLE
MS15435 BIT, SCREWDRIVER, CROSS POINT, REED AND PRINCE FOR RATCHET, DOUBLE
SPIRAL, AUTOMATIC RETURN
MS15436 BIT, SCREWDRIVER, CROSS POINT, PHILLIPS FOR RATCHET, DOUBLE SPIRAL,
AUTOMATIC RETURN
MS15437 BIT, SCREWDRIVER, FLAT TIP, FOR RATCHET, DOUBLE SPIRAL, AUTOMATIC
RETURN
MS15450 SCREWDRIVER, FLAT TIP, CABINET, STRAIGHT SIDES, PLASTIC HANDLE,
BOLSTER, FORGED
MS15461 WRENCHES, OPEN END, ADJUSTABLE, SINGLE HEAD, STRAIGHT HANDLE
MS15462A WRENCH, MONKEY
MS15468 DOG, SHIPWRIGHT S, 3/4 INCH
MS15469 DOG, SHIPWRIGHT S, 5/8-INCH
MS15475A PRESS, LEAD SEAL, HAND, INSPECTION AND ACCEPTANCE, DOD (USE MIL-I-19709)
MS15486A VISE, CIRCULAR SAW FILING
MS15490 WRENCH, PLIER, TWO STRAIGHT JAW
MS15491 WRENCH, PLIER, CURVED JAW (WITH CUTTER)
MS15502B VISES, CONTOUR GRIPPING
MS15722 CALKING IRON, WOOD, SINGLE CROOK, CREASELESS
MS15723 CALKING IRON, WOOD, STRAIGHT, CREASELESS
MS15724 CALKING IRON, WOOD, DECK AND DUMB, CREASELESS
MS15725 CALKING TOOL, WOOD, SINGLE CROOK
MS15726 CALKING IRON, WOOD, MAKING, STRAIGHT, SINGLE CREASE
MS15727 CALKING IRON, WOOD, MAKING, STRAIGHT, DOUBLE CREASE
MS15728 CALKING IRON, WOOD, MAKING, SINGLE CROOK, CREASELESS
MS15729 CALKING IRON, WOOD, REEFING HOOK, CREASELESS
MS15730 CALKING IRON, WOOD, REEFING, CREASELESS
MS15731 CALKING IRON, WOOD, SPIKE, BENT, CREASELESS
MS15732 CALKING IRON, WOOD, SPIKE, STRAIGHT, CREASELESS
MS15743 WRENCH, AUTO, ADJUSTABLE
MS15768 AUGER, WATER CLOSET, HAND
MS15769 AUGER, PIPE AND SEWER, HAND, FLEXIBLE, COIL SPRING, SLIDING CRANK
HANDLE
MS15770 AUGER, PIPE AND SEWER, HAND, TOP SNAKE, HEAVY DUTY
MS15774 SQUARE DRIVE END STANDARDS, HAND TYPE (MALE AND FEMALE ) (FOR
USE WITH SQUARE DRIVE SOCKETS AND ATTACHMENTS)
MS15777B HANDLE, SCREWDRIVER BIT, PLASTIC, WITH CLUTCH DRIVE
MS15778B BITS, SCREWDRIVER, PHILLIPS CROSS TIP, FOR CLUTCH DRIVE HANDLE
MS15779B BITS, SCREWDRIVER, CABINET TYPE TIP, FOR CLUTCH DRIVE HANDLE
MS15780B EXTENSION, SCREWDRIVER BIT, FOR CLUTCH DRIVE HANDLE
MS15792 SCRIBER, MACHINIST S DOUBLE POINT, STRAIGHT AND BENT, REMOVABLE
MS15793 SCRIBER, MACHINIST S DOUBLE POINT STRAIGHT AND BENT, ADJUSTABLE
SLEEVE
MS15794 SCRIBERS, MACHINIST S, POCKET, SINGLE POINT, NONROLLING HEAD
MS15796 NOT 1 CUTTERS, ABRASIVE STEEL DRESSER, HAND (NO S/S DOCUMENT)
MS15797 DRESSER, ABRASIVE STEEL, HAND
MS15812A SCREWDRIVER, FLAT TIP-CROSS TIP, CLOSE QUARTER
MS16023 SCREWDRIVERS, SCREW HOLDING, SCREW SLOT GRIPPING, SLIDING ACTION,
PLASTIC HANDLE
MS16130 BLOCK, DOLLY, SHEET METALWORKING GENERAL PURPOSE, HIGH CROWN
MS16131 BLOCK, DOLLY, SHEET METALWORKING, GENERAL PURPOSE, LOW CROWN
MS16132 BLOCK, DOLLY, SHEET METALWORKING GENERAL PURPOSE, ANVIL
MS16133 BLOCK, DOLLY, SHEET METALWORKING, GENERAL PURPOSE, RAIL
MS16134 BLOCK, DOLLY, SHEET METALWORKING, HEEL
MS16135 BLOCK, DOLLY, SHEET METALWORKING, TOE
MS16136 BLOCK, DOLLY, SHEET METALWORKING, WEDGE
MS16137 BLOCK, DOLLY, SHEET METALWORKING, BODY
MS16138 BLOCK, DOLLY, SHEET METALWORKING, SHRINKING, WITH TRENCHING GROOVES
MS16139 BLOCK, DOLLY, SHEET METALWORKING, FENDER
MS16140 BLOCK, DOLLY, SHEET METALWORKING, ROUGHING
MS16141 BLOCK, DOLLY, SHEET, METALWORKING, THIN, HIGH CROW
MS16145 WRENCH, SPANNER, ADJUSTABLE COMBINATION, HYDRANT AND SPANNER
MS16146A WRENCHES, SPANNER, ADJUSTABLE FACE TYPE
MS16147A WRENCHES, SPANNER, ADJUSTABLE HOOK TYPE, FIXED PIVOT POINT
MS16148 WRENCH, SPANNER, ADJUSTABLE HOOK TYPE, SLIDING JAW, HEAVY DUTY
MS16149 WRENCH, SPANNER, ADJUSTABLE HOOK TYPE, VARIABLE PIVOT POINT
MS16150 WRENCH, SPANNER, HOSE COUPLING TYPE, DOUBLE EYE
MS16151 WRENCHES, SPANNER, NONADJUSTABLE FACE TYPE, TWO-PIN
MS16152 WRENCH, SPANNER, UNIVERSAL HOSE COUPLING
MS16153A WRENCHES, SPANNER, PIN TYPE, HARDENED AND TEMPERED STEEL
MS16180 WRENCHES, PIPE, HEAVY-DUTY, DROP-FORGED STEEL OR CAST MALLEABLE
IRON OR STEEL
MS16181 WRENCHES, PIPE, HEAVY DUTY, FORGED ALUMINUM ALLOY
MS16182 WRENCHES, PIPE, CHAIN
MS16183 WRENCHES, PIPE, STRAP
MS16184 WRENCHES, PIPE, ANGLE STYLE
MS16185 WRENCH, BASIN
MS16234 HOLDERS, SCREWDRIVER BIT, HAND, FEMALE SQUARE DRIVE
MS16235 ADAPTERS, SOCKET WRENCH, HAND, MALE TO FEMALE
MS16236 BITS, SCREWDRIVER, HAND, CLUTCH TIP, MALE STRAIGHT HEX DRIVE SHANK
MS16237 BITS, SCREWDRIVER, HAND, FLAT TIP (DRAG LINK), FEMALE SQUARE DRIVE
SHANK
MS16238 BITS, SCREWDRIVER, HAND, FLAT TIP, MALE STRAIGHT HEX DRIVE SHANK
MS16239 BITS, SCREWDRIVER, HAND, SOCKET-HEAD SET AND CAP SCREW, MALE STRAIGHT
HEX DRIVE SHANK
MS16240 BITS, SCREWDRIVER, HAND, PHILLIPS TYPE CROSS TIP, MALE STRAIGHT
HEX DRIVE SHANK
MS16241 BITS, SCREWDRIVER, HAND, REED AND PRINCE CROSS TIP, MALE STRAIGHT
HEX DRIVE SHANK
MS16242 EXTENSION, SOCKET WRENCH, HAND, FLEXIBLE BAR TYPE
MS16243 EXTENSIONS, SOCKET WRENCH, HAND SOLID BAR TYPE
MS16244 HANDLES, SOCKET WRENCH, HAND, BRACE (SPEEDER) TYPE, DOUBLE REVOLVING
GRIP
MS16245 HANDLES, SOCKET WRENCH, HAND, HINGED TYPE
MS16246 HANDLES, SOCKET WRENCH, HAND IMPACT TYPE
MS16249 HANDLES, SOCKET WRENCH, HAND SLIDING T-TYPE
MS16250 HANDLE, SOCKET WRENCH, HAND, SPIN (SCREWDRIVER) TYPE
MS16251 CROWFOOT ATTACHMENTS, SOCKET WRENCH, HAND, NONRATCHETING, OPEN
END, THIN
MS16252 RATCHET ATTACHMENTS, SOCKET WRENCH, HAND
MS16253 SOCKETS, SOCKET WRENCH, HAND, DEEP LENGTH, HEXAGON AND 12-POINT
MS16254 SOCKETS, SOCKET WRENCH, HAND, REGULAR LENGTH, 6-POINT, 8-POINT
AND 12-POINT
MS16255 SOCKETS, SOCKET WRENCH, HAND UNIVERSAL JOINT TYPE, 12-POINT
MS16257 UNIVERSAL JOINTS, SOCKET WRENCH, HAND
MS16258 WRENCHES, SOCKET, HAND SINGLE SOCKET OFFSET TYPE
MS16260 WRENCHES, SOCKET, HAND, SINGLE SOCKET T-TYPE
MS16270A JACKS, SCREW, HAND, STANDARD SPEED UPRIGHT OR INVERTED, WITH
FOOT LIFT
MS16271 JACKS, SCREW, HAND, STANDARD SPEED, JOURNAL OR INVERTED
MS16272 JACK, SCREW, HAND, HIGH SPEED, LEVER-OR GOVERNOR-LOWERING CONTROL
MS16273 JACKS, SCREW, HAND, BELL BOTTOM
MS16274A JACKS, SCREW, HAND, AUTOMOBILE OR TRUCK, GEARED SCREW
MS16275A JACKS, SCREW, HAND REEL, NONRATCHET TYPE
MS16277A JACKS, RACK BAR, SOLID BASE WITH FOOT LIFT, SINGLE SOCKET
MS16278A JACK, RACK BAR, SOLID BASE WITH FOOT LIFT, DOUBLE SOCKET
MS16279A JACK, RACK BAR, HINGED BASE, DOUBLE SOCKET, POLE PULLING
MS16280B JACKS, HYDRAULIC, HAND, REMOTE CONTROL, HEAVY DUTY
MS16281A JACKS, HYDRAULIC, HAND, REMOTE CONTROL, GENERAL PURPOSE
MS16282A JACKS, HYDRUALIC, HAND SELF-CONTAINED, HEAVY DUTY
MS16283A JACKS, HYDRAULIC, HAND, SELF-CONTAINED, GENERAL INDUSTRIAL AND
VEHICLE
MS16289 KNIFE, PUTTY, SEMIFLEXIBLE
MS16305 AWL, BELT
MS16306 AWLS, BRAD
MS16307 AWL, SADDLERS, COLLAR
MS16308 AWL, SADDLER S HARNESS
MS16309 AWL, SADDLER S PAD OR SEAT
MS16310 AWL, SADDLER S SEWING AND STITICHING, AUTOMATIC, ENCLOSED SPOOL
OR BOBBIN
MS16311 AWL, SADDLERS, SEWING AND STITCHING, COMMON
MS16312 AWL, SCRATCH
MS16357 MALLET, HAND, RUBBER
MS16367 WRENCHES, BOX AND OPEN, COMBINATION, 15-DEGREE ANGULAR OFFSET
BOX END
MS16368 WRENCHES, BOX ANGULAR OFFSET DOUBLE HEAD TYPE AND DOUBLE OFFSET
DOUBLE HEAD, 12-POINT, 15 DEGREE HEAD, REGULAR LENGTH
MS16369 WRENCHES, BOX, DOUBLE OFFSET DOUBLE HEAD, 12-POINT, 45-DEGREE
HEAD, REGULAR LENGTH
MS16370 WRENCHES, BOX, DOUBLE OFFSET DOUBLE HEAD, 12-POINT, 45-DEGREE
HEAD, SHORT LENGTH
MS16371 WRENCHES, BOX, HALF-MOON DOUBLE HEAD, 12-POINT
MS16372 WRENCHES, BOX, SLUGGING, 12-POINT, LONG
MS16373 WRENCH, BOX, SLUGGING, 12-POINT, SHORT
MS16374 WRENCH, BOX, STRIKING, 12-POINT
MS16375 WRENCH, BOX, STRUCTURAL, 12-POINT CLASS 3 EXTERNAL THREADS
MS16376 WRENCHES, OPEN END BOX, FLARE NUT, SINGLE END, 12-POINT
MS16377 WRENCHES, OPEN END, FIXED, DOUBLE HEAD, 15-DEGREE HEAD ANGLE AND
60-DEGREE HEAD ANGLE
MS16378 WRENCHES, OPEN END, FIXED, DOUBLE HEAD, 15-DEGREE HEAD ANGLE AND
75- OR 80-DEGREE HEAD ANGLE, IGNITION
MS16379 WRENCHES, OPEN END, FIXED, DOUBLE HEAD, 15-DEGREE HEAD ANGLE,
IGNITION
MS16380 WRENCHES, OPEN END, FIXED, DOUBLE HEAD, 15-DEGREE HEAD ANGLE,
ENGINEERS
MS16381 WRENCHES, OPEN END, FIXED, DOUBLE HEAD, 15-DEGREE HEAD ANGLE,
TAPPET
MS16382 WRENCHES, OPEN END, FIXED, SINGLE HEAD, 15-DEGREE HEAD ANGLE,
FLARED HANDLE AND TAPERED HANDLE, ENGINEERS
MS16383 WRENCHES, OPEN END, FIXED, STRUCTURAL
MS16384 WRENCH, OPEN END, FIXED, THIN DOUBLE HEAD, 15-DEGREE HEAD ANGLE,
JAM NUT
MS16385 WRENCHES, OPEN END, FIXED, THIN SINGLE HEAD, STRAIGHT HEAD (AFTER
31 MARCH 1967 USE GGG-W-636, TYPE XV11, CLASS 2)
MS16552 GOUGES, PARING, TANGED, STRAIGHT SHANK
MS16558A BENDER, TUBE, HAND, PORTABLE, WORM-GEAR ACTUATED, MULTIPLE SIZE
MS16559A BENDER, TUBE, HAND, PORTABLE, LEVER ACTUATED, MULTIPLE SIZE
MS16560 BENDERS, TUBE, HAND, PORTABLE, LEVER ACTUATED, SINGLE SIZE
MS16561 BENDERS, TUBE, HAND, PORTABLE, EXTERNAL COIL SPRING
MS16618 WRENCHES, RATCHET, REVERSIBLE, PROTRUDING HEAD, REVERSE MECHANISM
IN HANDLE, SINGLE HEXAGON SOCKET
MS16619 WRENCHES, RATCHET, REVERSIBLE, PROTRUDING HEAD, REVERSE MECHANISM
IN HANDLE, SINGLE SQUARE SOCKET
MS16620 WRENCH, RATCHET, REVERSIBLE, PROTRUDING HEAD, REVERSE MECHANISM
IN HEAD, MULTISIZE HEXAGON SOCKET
MS16621 WRENCHES, RATCHET, REVERSIBLE, THIN HEAD, REVERSE MECHANISM IN
HANDLE, SINGLE HEXAGON SOCKET
MS16622 WRENCHES, RATCHET, REVERSIBLE, THIN HEAD, REVERSE MECHANISM IN
HANDLE, SINGLE SQUARE SOCKET
MS16635 GRIP, CABLE, JAW, ECCENTRIC
MS16636 GRIPS, CABLE, JAW, PARALLEL, BRONZE-LINED, STEEL, SMOOTH
MS16697 INSTALLING TOOL, PISTON PIN RETAINER
MS16846 JACKS, HYDRAULIC, HAND, SELF-CONTAINED, CENTER HOLE, PUSH-PULL
MS16852 STUD REMOVERS AND SETTERS, COLLET GRIP, HOUSING WITH BOLT, MEDIUM
AND LARGE.
MS16853 STUD REMOVERS AND SETTERS, COLLET GRIP, HOUSING WITH DRIVE SCREW,
SMALL AND MEDIUM.
MS16854 STUD REMOVER AND SETTER, ECCENTRIC GRIP
MS16855A STUD REMOVERS AND SETTERS, WEDGE GRIP, MEDIUM AND LARGE.
MS16856 SCREWDRIVERS, FLAT TIP, HEAVY DUTY, FLARED SIDES, STEEL HANDLE
WITH WOOD INSERTS, ROUND BLADE
MS16868 EXTRACTORS, TAP
MS16869 GUIDES, DRILL, SCREW EXTRACTING
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
