畅销书下载

DOD美国国防部文件（含MIL美国军用标准）及相关标准文献中英文对照目录183页.......(定题浏览)

这个合集包括已经被美国国防部采用，代替相同内容的书面文件或取代先前军事技术规范的行业标准。这些标准来自二十多个组织，其中包括 ACI（美国混凝土协会）、AGMA（美国齿轮制造商协会）、AIA/NAS（美国航天工业协会——国家航天标准）、ANSI（美国国家标准协会）、API（美国石油学会）、ARI（美国空调与制冷协会）、ASME（美国机械工程师协会）、AWWA（美国给水工程协会）、CGA（压缩气体协会）、EIA（电子工业协会）、IEEE（电气电子工程师协会）、IPC（电子电路互联和封装协会）、MSS（美国阀门装置制造标准化协会）、NEMA（美国国家电器制造商协会）、NFPA（美国消防协会）、SAE（美国机动工程师协会）、UL（美国保险商实验室）。

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

MS16870 EXTRACTORS, SCREW, STRAIGHT, STRAIGHT FLUTED, SLIDING TURNOUT NUT
MS16871 EXTRACTORS, SCREW, TAPERED, SPIRAL FLUTE OR RIDGED, DRILL
MS17007 SOLDERING AID
MS17087 SHOVEL, HAND, SQUARE POINT, SNOW, D-HANDLE
MS17088A SHOVEL, HAND, ROUND POINT, D-HANDLE, OPEN BACK, GENERAL PURPOSE
MS17089 SHOVEL, HAND, ROUND POINT, LONG HANDLE, OPEN BACK, GENERAL PURPOSE
MS17090 SHOVEL, HAND, SNOW OR BARN, D-HANDLE, OPEN BACK, GENERAL PURPOSE
MS17091 SHOVEL, HAND, SQUARE POINT, LONG HANDLE, OPEN BACK, GENERAL PURPOSE
MS17092A SHOVEL, HAND, SQUARE POINT, D-HANDLE, OPEN BACK, GENERAL PURPOSE
MS17093 SNOW PUSHER, HAND, SQUARE POINT, LONG HANDLE
MS17094 SHOVELS, HAND, TELEGRAPH, PLAIN BACK, ROUND POINT, STRAIGHT HANDLE
MS17095 SPOONS, TELEGRAPH, HAND, EASTERN PATTERN, PLAIN BACK, ROUND POINT, STRAIGHT HANDLE
MS17096 SPADE, HAND, DRAIN, D-HANDLE, PLAIN BACK, ROUND POINT
MS17097 SPADE, HAND, DITCH OR POST, D-HANDLE, PLAIN BACK, SQUARE POINT
MS17098 SCOOP, SAND AND GRAVEL, HAND, D-HANDLE, OPEN BACK, ROUND POINT
MS17099 SCOOP, EASTERN PATTERN, HAND, D-HANDLE, OPEN BACK, SQUARE POINT
MS17126 FORKS, STONE, HAND, D-HANDLE
MS17137 FILLET TOOLS, PATTERN MAKER S
MS17138 BELLOWS, HAND, FOUNDRY
MS17139 HEATING TORCHES, FUEL OIL BURNING, PORTABLE SUCTION TYPE.
MS17255 PLIERS, HEAT COIL
MS17256 PLIERS, FENCE, SINGLE HEAD
MS17257 PLIERS, SLIP JOINT, ANGLE NOSE, WITHOUT CUTTER, MULTIPLE HOLE
MS17258 PLIERS, SLIP JOINT, COMPOUND LEVERAGE, MULTIPLE HOLE
MS17259 PLIERS, SLIP JOINT, BENT NOSE, COMBINATION, WITH CUTTER, REGULAR
MS17776C CRIMPING TOOL, TERMINAL, HAND, LUG TERMINAL AND EXTERNAL POWER PLUG SOCKET CONTACTS, 22-10 CAPACITY (USE MIL-C-22520/24)
MS17805B INSTALLING TOOL, CONNECTOR ELECTRICAL CONTACT SIZE 16 CONTACT (USE MIL-I-81969/18)
MS17806B REMOVE TOOL, CONNECTOR, ELECTRICAL CONTACT SIZE 16 CONTACT (USE MIL-I-81969/20)
MS17823D NOT 1 TOOL, HAND, FOR ADJUSTABLE PLASTIC CABLE STRAPS (THIN TYPE) (USE MS 90387)
MS17824D NOT 1 TOOL, HAND, FOR ADJUSTABLE PLASTIC CABLE STRAPS (THICK TYPE) (USE MS90387)
MS18278B INSTALLING AND REMOVAL TOOL, CONNECTOR, ELECTRICAL, CONTACT (SIZE 20 CONTACT)
MS19090 TONGS, BLACKSMITHS, STRAIGHT LIP, FLAT JAW
MS19091 TONGS, BLACKSMITHS, CURVED LIP, FLUTED JAW
MS19092 TONGS, BLACKSMITHS, RIVET HOLDING
MS19093 TONGS, BLACKSMITHS, SINGLE PICK UP
MS19094 TONGS, BLACKSMITHS, DOUBLE PICKUP
MS19095 TONGS, BLACKSMITHS , (V) SHAPED
MS19096 TONGS, BLACKSMITHS, GAD
MS19097 WRENCHES, TAP AND REAMER, ADJUSTABLE, T-HANDLE, RATCHETING BODY, SLIDING HANDLE
MS19098 WRENCH, TAP AND REAMER, ADJUSTABLE, T-HANDLE, SOLID BODY, NONSLIDING HANDLE
MS19099 WRENCH, TAP AND REAMER, ADJUSTABLE, T-HANDLE, SOLID BODY, SLIDING HANDLE
MS19100 WRENCHES, TAP AND REAMER, ADJUSTABLE, STRAIGHT HANDLE
MS24256M TOOL CONTACT CONNECTOR, ASSEMBLY AND DISASSEMBLY (USE MIL-I-81969/17 & 19)
MS25020 CRIMPING TOOL - HAND, FOR ALUMINUM AIRCRAFT CABLE TERMINALS
MS25037D NOT 1 CRIMPING TOOL, HAND, CLASS 1, FOR COPPER INSULATED TERMINALS, 26-10 (USE MS 90413)
MS25121A NOT 2 TOOL, PRETENSIONING, FOR ANTENNA TENSION TAKEUP
MS25187B NOT 2 EXTRACTOR, ELECTRONIC TUBE (NO S/S DOCUMENT)
MS25312A TOOL, CRIMPING, HAND, FOR INSULATED SHIELD GROUND (ASG)
MS25442C NOT 1 DIE, FOR MS 25441, ELECTRIC, HYDRAULIC CRIMPING TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS)
MS27437B CRIMPING TOOL, HAND, RF TYPE, BNC CONNECTOR TO RG CABLE (USE MIL-C-22520/5)
MS27495D TOOL, CONTACT, CONNECTOR ASSEMBLY AND DISASSEMBLY (S/S BY MIL-I-81969/8)
MS27509A TOOL, CONTACT, CONNECTOR, ASSEMBLY AND DISASSEMBLY (USE MS 27534)
MS27534B TOOL, CONTACT INSERTION-EXTRACTION, ELECTRICAL CONNECTOR (S/S BY MIL-I-81969/14)
MS27828A CRIMPING TOOL, ELECTRICAL CONNECTOR CONTACTS, HAND (USE MIL-C-22520/1)
MS27831A CRIMPING TOOL, ELECTRICAL CONNECTOR CONTACTS, HAND, MINIATURE (USE MIL-C-22520/2)
MS3165B REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT SIZE 16, 8, 4 AND 0 (S/S BY MIL-I-81969/29)
MS3191K TOOL, HAND, CRIMP, CLASS 1 - FOR CONTACTS OF ELECTRIC CONNECTORS (S/S BY MIL-C-22520/1)
MS3195A INDENTOR CONFIGURATION, CRIMP TOOLS, FOR CONTACTS OF ELECTRIC CONNECTORS (USE MIL-C-22520/1)
MS3198F TOOL, HAND, CRIMP, MINIATURE, CLASS 1 FOR CONTACTS OF ELECTRIC CONNECTORS (USE MIL-C-22520/2)
MS3313B TOOL KIT, CRIMP, MINIATURE, FOR CONTACTS OF ELECTRIC CONNECTORS (S/S BY MIL-T-83507/17)
MS3316C TOOL, CRIMP, HAND, FOR MIL-T-7928 INSULATED TERMINALS, 12-10 (S/S BY MIL-C-22520/5C)
MS3483A REMOVAL TOOLS, CONNECTOR, CONTACT ELECTRICAL SIZE 8, 4 AND 0 (US/S BY MIL-I-81969/15)
MS51006A WRENCH, DRAIN PLUG, STRAIGHT BAR (NO S/S DOCUMENT)
MS51800A DRIFTPINS, BRASS (NO S/S DOCUMENT)
MS63042 CRIMPING TOOL, TERMINAL, HAND.
MS63046 PUNCH, DRIVE PINS, BRASS
MS8516A NOT 2 WRENCH-1/2 INCH SQUARE DRIVE ADJUSTABLE SPANNER (3.5 TO 6 INCHES DIA) (NO S/S DOCUMENT)
MS90413D TOOL, CRIMP, HAND, FOR MIL-T-7928 INSULATED TERMINALS, 26-14 (S/S BY MIL-C-22520/5C)
MS90455D INSTALLING TOOL, ELECTRICAL CONNECTOR CONTACT (S/S BY MIL-I-81969/17)
MS90456D REMOVAL TOOL, ELECTRICAL CONNECTOR CONTACT (S/S BY MIL-I-81969/19)
MS90487A TOOL, CRIMP, HAND, FOR MS18265 AND M518266 SHIELDED CONTACTS (USE MIL-C-22520/5)
MS90562D REMOVAL TOOL, ELECTRICAL CONNECTOR CONTACT (CLASS L) (S/S BY MIL-I-81969/27)
NN-H-81C NOT 1 HANDLES, ASH (NO S/S DOCUMENT)
NN-H-93C NOT 1 HANDLES: HICKORY, STRIKING TOOL (NO S/S DOCUMENT)
OO-W-891E(I7) NOT 1 WRENCH, IMPACT, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
QPL-16567-1 GRIP, CABLE
QPL-17912-12 WRENCH, OPEN-END ADJUSTABLE, AND WRENCH, MONKEY, NONSPARKING AND NONMAGNETIC
QPL-18745-12 HAMMER, HAND, NONSPARKING AND NONMAGNETIC
QPL-19762-16 NOT 1 WRENCH, PIPE, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
QPL-19928-14 NOT 1 WRENCH, BOX, AND OPEN-END, FIXED, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
QPL-20206-4 BLOWTORCH OIL, PORTABLE
QPL-21111-13 NOT 1 SCREWDRIVER, FLAT TIP, OFFSET, AND CROSSTRIP NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
QPL-21120-12 NOT 1 KEY, SOCKET HEAD SCREW, HEXAGON, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
QPL-22520/10 NOT 1 CRIMPING TOOL, CONTACT, ELECTRIC, HAND GENERAL SPECIFICATION FOR (USE QPL 22520-16)
QPL-22520/1-3 CRIMPING TOOLS, CONTACT, ELECTRIC, HAND GENERAL SPECIFICATION FOR (USE QPL 22520-16)
QPL-22520/2-3 NOT 1 CRIMPING TOOLS, CONTACT, ELECTRIC, HAND, GENERAL SPECIFICATION FOR (S/S BY QPL-22520)
QPL-22520/3-2 CRIMPING TOOLS, CONTACT, ELECTRIC, HAND GENERAL SPECIFICATION FOR (USE QPL 22520-16)
QPL-22520/4 NOT 2 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION GENERAL SPECIFICATION FOR (S/S BY QPL-22520)
QPL-22520/5 NOT 1 CRIMPING TOOL, CONTACT, ELECTRIC, HAND GENERAL SPECIFICATION FOR (USE QPL 22520-16)
QPL-22520/6 NOT 1 CRIMPING TOOLS, CONTACT, ELECTRIC, HAND GENERAL SPECIFICATION FOR (USE QPL 22520-16)
QPL-22520/7 NOT 1 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION GENERAL SPECIFICATION FOR
QPL-22910-5 NOT 1 TOOL, CRIMPING, HAND, FOR CRIMP STYLE ELECTRIC TERMINAL AND SHIELD FERRULE (NO S/S DOCUMENT)
QPL-23514-12 NOT 1 WRENCH, SPANNER, ADJUSTABLE HOOK, NONSPARKING AND NONMAGNETIC (NO S/S DOCUMENT)
QPL-2678-21 NOT 1 BRUSHES, WIRE, BOILER TUBE, EXPANDING TYPE FOR USE WITH ELECTRIC AND MOTOR DRIVEN BOILER TUBE CLEANING OUTFITS, AND FIXED SECTIONAL HAND TYPE (NO S/S DOCUMENT)
QPL-55619-4 NOT 2 TOOL, CRIMPING, FOR COAXIAL, RADIO-FREQUENCY, CONNECTORS GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-83724-1 TOOL, CRIMPING, CONTACT, ELECTRIC CONNECTOR
QPL-GGG-B-550 BLOWTORCHES, ALCOHOL AND GASOLINE, HAND
QPL-GGG-W-642-11 WRENCH, BUNG, (NONSPARKING AND NONMAGNETIC)
QPL-GGG-W-686 WRENCHES, TORQUE
QQ-T-40(3) TAPE, FISH, STEEL (FOR ELECTRICIANS USE ) (USE GGG-T-001310)
QQ-W-348(1) WIRE, FISH (FOR ELECTRICIANS AND PLUMBERS USE) SUPERSEDED BY QQ-T-40 AND GGG-A-821(
RR-G-691B(1) NOT 1 GRIP, CABLE JAW (NO S/S DOCUMENT)
RR-G-700B NOT 1 GRIP, WIRE, STRAND, WIRE ROPE AND CABLE (NO S/S DOCUMENT)
RR-P-586A NOT 1 POT, MELTING, (NONELECTRIC, SOLDER STYLE) (NO S/S DOCUMENT)
RR-P-586A(I1) NOT 1 POT, MELTING, (NONELECTRIC, SOLDER STYLE) (NO S/S DOCUMENT)
W-G-441A NOT 1 GLUEPOT, ELECTRIC (PORTABLE, DRY AND WET) (NO S/S DOCUMENT)
ZZ-F-00570 FORCE CUPS, PLUMBER S (BALL SHAPED)
ZZ-F-566B NOT 1 FORCE CUP, PLUMBER'S (NO S/S DOCUMENT)
ZZ-F-566B(I1) NOT 1 FORCE CUP, PLUMBER'S (NO S/S DOCUMENT)
A-A-3021 NOT 2 萃取，螺钉（种和管） EXTRACTOR, SCREW (STUD AND PIPE)
A-A-3041A 扳手，公开年底，棘轮（交谘会模式） ，管配件，电器电缆终端，馅管腺坚果 WRENCH, OPEN END, RATCHET (TAC PATTERN) FOR TUBE FITTINGS, ELECTRICAL CABLE TERMINALS, AND STUFFING TUBE GLAND NUTS
A-A-3042 NOT 2 插座，打开可拆卸的，标准的墙，八角 SOCKET, OPEN DETACHABLE, STANDARD WALL, OCTAGON
A-A-3050 NOT 2 vise ，管道，铰链赵少康 VISE, PIPE, HINGED JAW
A-A-3152A 螺丝批，贵金属' ，旋转旋钮 SCREWDRIVER, JEWELERS', SWIVEL KNOB
A-A-3153A NOT 2 位，螺丝起子，男小腿，六边形的秘诀 BIT, SCREWDRIVER, MALE SHANK, HEXAGON TIP
A-A-346A mattock ，刀具（无处理） MATTOCK, CUTTER (WITHOUT HANDLE)
A-A-50460B NOT 1 承运人，蓄电池，手 CARRIER, STORAGE BATTERY, HAND
A-A-50765A 钳;持有人的资产负债表 FORCEPS; SHEET HOLDER
A-A-52114A mattax ，与承运人 MATTAX, WITH CARRIER
A-A-52123 酒吧，造材，铆钉 BARS, BUCKING, RIVET
A-A-52129 FID法 FID
A-A-52209 切割刀，钻石点 SCRIBER, DIAMOND POINT
A-A-53193 锤，手（光） HAMMER, HAND (OPTICAL)
A-A-59158 工具插入和提取螺旋线圈钢丝螺纹刀片 TOOLS FOR INSERTING AND EXTRACTING HELICAL COIL WIRE SCREW THREAD INSERTS
A-A-59193 画笔，线，锅炉管，扩大型使用电和空气马达驱动锅炉管清洗衣服 BRUSHES, WIRE, BOILER TUBE, EXPANDING TYPE FOR USE WITH ELECTRIC AND AIR MOTOR DRIVEN BOILER TUBE CLEANING OUTFITS
A-A-59219 NOT 1 augers ， posthole ，手 AUGERS, POSTHOLE, HAND
A-A-59220 扳手，打开结束，扳手大会，加盖钢 WRENCHES, OPEN END, AND WRENCH ASSEMBLY, STAMPED STEEL
A-A-59221 NOT 1 lappers ，锥阀，手动力 LAPPERS, POPPET VALVE, HAND POWERED
A-A-59337 intrenching工具，手，折叠，重量轻 INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT
ANSI-B173.1 指甲敲锤-安全规定 NAIL HAMMERS - SAFETY REQUIREMENTS FOR
ANSI-B173.3 手工具-沉重的打击工具-安全规定 HAND TOOLS - HEAVY STRIKING TOOLS - SAFETY REQUIREMENTS
ANSI-B173.8 打桩机，铆，缩放，和tinners '设置-安全规定 HAMMERS, RIVETING, SCALING, AND TINNERS' SETTING - SAFETY REQUIREMENTS
ANSI-B18.3.2M 键＆位，六角形，公制系列 KEYS & BITS, HEXAGON, METRIC SERIES
ASME-B107.1 扳手，插座，手（英寸系列） WRENCHES, SOCKET, HAND (INCH SERIES)
ASME-B107.10M 扳手，插座，处理和附件手（英寸和公制系列） WRENCHES, SOCKET, HANDLES AND ATTACHMENTS FOR HAND (INCH AND METRIC SERIES)
ASME-B107.14M 工具，手，转矩 TOOLS, HAND, TORQUE
ASME-B107.15 螺丝刀，单位举报和菲利普斯 SCREWDRIVERS, FLAT TIP AND PHILLIPS
ASME-B107.19 钳子，护环 PLIERS, RETAINING RING
ASME-B107.2 扳手，插座，扩展，包括变压器，电和万向节，功率驱动（影响） （英寸系列） WRENCHES, SOCKET, EXTENSIONS, ADAPTORS, AND UNIVERSAL JOINTS, POWER DRIVE (IMPACT) (INCH SERIES)
ASME-B107.20M 钳子（ lineman的，铁工人的，煤气，玻璃，围栏） PLIERS (LINEMAN'S, IRON WORKER'S, GAS, GLASS, AND FENCE)
ASME-B107.21 扳手， crowfoot附件 WRENCH, CROWFOOT ATTACHMENTS
ASME-B107.23M 钳子，多个位置，可调（公制） PLIERS, MULTIPLE POSITION, ADJUSTABLE (METRIC)
ASME-B107.5M 插座扳手，手（公制系列） SOCKET WRENCHES, HAND (METRIC SERIES)
ASME-B107.8M 扳手，可调 WRENCHES, ADJUSTABLE
GGG-A-145A 调整工具，闸瓦（杓型） ADJUSTING TOOL, BRAKE SHOE (SPOON TYPE)
GGG-A-450A 对齐工具，电子设备 ALIGNMENT TOOL, ELECTRONIC EQUIPMENT
GGG-C-001507B crowfoot实习，套筒扳手 CROWFOOT ATTACHMENT, SOCKET WRENCH
GGG-C-1507A crowfoot实习，套筒扳手 CROWFOOT ATTACHMENT, SOCKET WRENCH
GGG-C-414A 钳，钢丝剪接 CLAMP, WIRE SPLICING
GGG-C-415A 爪，钉 CLAW, TACK
GGG-D-326C 挖掘机， posthole ，铰链 DIGGER, POSTHOLE, HINGED
GGG-E-00926C 萃取， cotter引脚 EXTRACTOR, COTTER PIN
GGG-E-926B 萃取， cotter引脚 EXTRACTOR, COTTER-PIN
GGG-I-671A 铁， calking ，木材 IRON, CALKING, WOOD
GGG-L-36A 钢包，甲板高薪 LADLES, DECK-PAYING
GGG-M-350B 是一面镜子，检查 MIRROR, INSPECTION
GGG-S-00731A 的利害关系，金工资产负债表;板，替补利益相关者 STAKES, SHEET METALWORKING; AND PLATE, BENCH STAKEHOLDER
GGG-T-00563B(1) 工具，铁匠' （凿子， flatters ， fullers ， hardies ，螺栓的标题工具，冲床， swages ） TOOLS, BLACKSMITHS' (CHISELS, FLATTERS, FULLERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES)
GGG-W-001405(1) 扳手，框（棘轮） WRENCH, BOX (RATCHETING)
GGG-W-00649 扳手， plier ，钳， plier ， plier ，油管夹 WRENCH, PLIER, CLAMP, PLIER, AND PLIER, TUBING PINCH
GGG-W-171 挖起杆，金属（镁） WEDGES, METAL (MAGNESIUM)
GGG-W-201B 楔，金属：拔节和突破 WEDGE, METAL: JOINTING AND BREAKING
GGG-W-644C 扳手，插座（车轮螺母） WRENCH, SOCKET (WHEEL NUT)
GGG-W-648B 扳手， lineman的 WRENCH, LINEMAN'S
GGG-W-665C NOT 2 扳手，扳手 WRENCH, SPANNER
MIL-C-22520/10D 卷曲工具，码头，另一方面，线材终止，大型同轴，屏蔽接触和ferrules ，终端lugs ，接合及端盖 CRIMPING TOOL, TERMINAL, HAND, WIRE TERMINATION, LARGE FOR COAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS
MIL-C-22520/17B 卷曲工具，码头，另一方面，线材终止卷曲型可移动的接触，电气连接器 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR CRIMP TYPE REMOVABLE CONTACTS, ELECTRIC CONNECTORS
MIL-C-22520/19 卷曲工具，码头，另一方面，线材终止大小16屏蔽接触（外联络人） CRIMPING TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (OUTER CONTACT)
MIL-C-22520/1C(2) 卷曲工具，码头，另一方面，线材终止丝大小的每桶12至20 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 20
MIL-C-22520/20 卷曲工具，码头，另一方面，线材终止大小16屏蔽接触（盾牌卷曲套） CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE)
MIL-C-22520/21 卷曲工具，码头，另一方面，线材终止大小12屏蔽接触（外联系） CRIMP TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (OUTER CONTACT)
MIL-C-22520/22 卷曲工具，码头，另一方面，线材终止大小12屏蔽接触（屏蔽卷曲套） CRIMP TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (SHIELDED CRIMP SLEEVE)
MIL-C-22520/24A 卷曲工具，码头，手部或电力驱动，电线终止。工具，片码头及外部电源插头插座接触，大小22-10 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION. TOOL, FOR LUG TERMINAL AND EXTERNAL POWER PLUG SOCKET CONTACTS, SIZE 22-10
MIL-C-22520/2C(1) 卷曲工具，码头，另一方面，线材终止丝大小的每桶20 28 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 20 THROUGH 28
MIL-C-22520/31 卷曲工具，码头，另一方面，屏蔽大小12外接触 CRIMPING TOOL, TERMINAL, HAND, FOR SHIELDED SIZE 12 OUTER CONTACTS
MIL-C-22520/32(1) NOT 2 卷曲工具，码头，另一方面，终止线的连接器，电气，扁平电缆（类型2 ） CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR CONNECTORS, ELECTRICAL, FLAT CABLE (TYPE 2)
MIL-C-22520/34B(1) NOT 1 卷曲工具，码头，另一方面，线材终止，卷曲型可移动接触的mIL -的C - 28840连接器 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, FOR CRIMP TYPE REMOVABLE CONTACTS FOR MIL-C-28840 CONNECTORS
MIL-C-22520/36C(2) 压缩工具，另一方面， 2型为半刚性同轴电缆（ F类连接器） COMPRESSION TOOL, HAND, TYPE 2 FOR SEMIRIGID COAXIAL CABLE (CATEGORY F CONNECTORS)
MIL-C-22520/4A 卷曲工具，联络，电力，另一方面屏蔽外接触 CRIMPING TOOL, CONTACT, ELECTRIC, HAND FOR SHIELDED OUTER CONTACTS
MIL-C-22520/5D 卷曲工具，码头，另一方面，线材终止，大型同轴，屏蔽接触和ferrules ，终端lugs ，接合及端盖 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, LARGE FOR COAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS
MIL-C-22520/7B 卷曲的工具，码头，另一方面，线材终止丝大小的每桶16日， 20日和22日 CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, 20 AND 22
MIL-C-43438D NOT 1 crimper ，雷管，货币供应量M2 ， plier类型，瓦特/保险丝刀具 CRIMPER, BLASTING CAP, M2, PLIER TYPE, W/FUSE CUTTER
MIL-DTL-22520/37 卷曲工具，电器，电线剪接，一方面驱动， II型， envvironmental接合，电线范围26-12 AWG的 CRIMPING TOOL, ELECTRICAL, WIRE SPLICING, HAND ACTUATED, TYPE II, FOR ENVVIRONMENTAL SPLICES, WIRE RANGE 26-12 AWG
MIL-DTL-22520/38 卷曲工具，码头，一方面驱动，电线终止， II型，外部电源插头插座接触和吊耳码头大小12月10日 CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 12-10
MIL-DTL-22520G SUP 1 卷曲工具，电线终止，一般规格 CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR
A-A-2349 NOT 1 WRAPPING TOOL, WIRE (NO S/S DOCUMENT)
A-A-2350A NOT 1 HAMMERS, PNEUMATIC, PORTABLE, CHIPPING (NO S/S DOCUMENT)
A-A-2351A NOT 1 SCALING AND CHIPPING TOOL, ROTARY, PORTABLE, ELECTRIC, AND CUTTER BUNDLES (NO S/S DOCUMENT)
A-A-2352 NOT 1 NIBBLERS, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-2529 NOT 1 IRON; CALKING WOOD (NO S/S DOCUMENT)
A-A-2673A NOT 1 NUTRUNNER AND SCREWDRIVER, PNEUMATIC (NO S/S DOCUMENT)
A-A-2678A NOT 1 WRENCH, IMPACT, PNEUMATIC, PORTABLE (PISTOL GRIP) (NO S/S DOCUMENT)
A-A-2679A NOT 1 SAW, CIRCULAR, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
A-A-2687A NOT 1 SANDER, PAD, PNEUMATIC, PORTABLE (ORBITAL MOTION) (NO S/S DOCUMENT)
A-A-2688 NOT 1 SANDER, PAD, PNEUMATIC, PORTABLE (RECIPROCATING MOTION) (NO S/S DOCUMENT)
A-A-2689A NOT 1 SANDER, DISK, PNEUMATIC, PORTABLE (RIGHT ANGLE) (NO S/S DOCUMENT)
A-A-2690A NOT 1 SANDER, DISK, PNEUMATIC, PORTABLE (RANDOM ORBITAL) (NO S/S DOCUMENT)
A-A-2692A NOT 1 WRENCH, IMPACT, PNEUMATIC, PORTABLE (BODY GRIP) (NO S/S DOCUMENT)
A-A-2709 NOT 1 SANDER, DISK, PNEUMATIC, PORTABLE (VERTICAL DRIVE) (NO S/S DOCUMENT)
A-A-3044 NOT 1 SANDER, ELECTRIC, PORTABLE, DISK (NO S/S DOCUMENT)
A-A-3049 NOT 1 HAMMER, PNEUMATIC, PORTABLE (RIVETING HAMMER) (NO S/S DOCUMENT)
A-A-3088 NOT 1 BLADE, RECIPROCATING SAW, 1/4-INCH UNIVERSAL SHANK (JIG SAW BLADE) (NO S/S DOCUMENT)
A-A-3089 NOT 1 BLADE, RECIPROCATING SAW, 1/2-INCH UNIVERSAL SHANK (RECIPROCATING SAW BLADE) (NO S/S DOCUMENT)
A-A-3090 NOT 1 CHISELS, SCALING, POWER HAMMER (NO S/S DOCUMENT)
A-A-3091 NOT 1 CHISELS, COLD, POWER HAMMER (NO S/S DOCUMENT)
A-A-3092 NOT 1 SANDER, ELECTRIC, PORTABLE, BELT (NO S/S DOCUMENT)
A-A-3093 NOT 1 SANDER, ELECTRIC, PORTABLE, OSCILLATING PAD (NO S/S DOCUMENT)
A-A-399A NOT 1 WRENCH SET, SOCKET, POWER, 3/4 INCH DRIVE (NO S/S DOCUMENT)
A-A-437A NOT 1 SAW, RECIPROCATING, PORTABLE, ELECTRIC, HEAVY DUTY (NO S/S DOCUMENT)
A-A-438 NOT 1 WRENCH, IMPACT, ELECTRIC, DOUBLE INSULATED (NO S/S DOCUMENT)
A-A-439 TAPPER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-442 DRIVER, PROJECTILE UNIT, HAMMER ACTUATED (NO S/S DOCUMENT)
A-A-444 NOT 1 DRIVER, PROJECTILE UNIT, .27 CALIBER (NO S/S DOCUMENT)
A-A-445 DRIVER, PROJECTILE UNIT, .38 CALIBER (NO S/S DOCUMENT)
A-A-446 NOT 1 DRILL, ELECTRIC, PORTABLE, BATTERY POWERED, 750 RPM (NO S/S DOCUMENT)
A-A-448 DRILL, ELECTRIC, PORTABLE, SELECTIVE SPEED CONTROL (NO S/S DOCUMENT)
A-A-449 DRILL, ELECTRIC, PORTABLE, NICKEL CADMIUM BATTERY POWERED (NO S/S DOCUMENT)
A-A-450A NOT 1 HAMMER, ROTARY, ELECTRIC (NO S/S DOCUMENT)
A-A-473 PLUMBER TOOL, TRIGGER ACTUATED (NO S/S DOCUMENT)
A-A-476 SANDER, PNEUMATIC (NO S/S DOCUMENT)
A-A-477 NUTRUNNER (NO S/S DOCUMENT)
A-A-481 NOT 1 DRILLS, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-482 NOT 1 ROUTER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-484 SAW, CIRCULAR, PORTABLE, ELECTRIC, 3800 RPM (NO S/S DOCUMENT)
A-A-485 PLANE, BLOCK, ELECTRIC (NO S/S DOCUMENT)
A-A-489 SAW, RECIPROCATING, PORTABLE, ELECTRIC, VERTICAL DRIVE (NO S/S DOCUMENT)
A-A-491 NOT 1 SANDER FILER, PNEUMATIC (NO S/S DOCUMENT)
A-A-500 PLUMBING TOOL, ALUMINUM PRESSURE CHAMBER (NO S/S DOCUMENT)
A-A-50684 NOT 1 TOOL, WIRE WRAP (NO S/S DOCUMENT)
A-A-507 NAILER, PNEUMATIC, ADJUSTABLE SPEED (NO S/S DOCUMENT)
A-A-508 ROUTER, PNEUMATIC (NO S/S DOCUMENT)
A-A-509 NOT 1 SHAVER, WELD, PORTABLE, PNEUMATIC (NO S/S DOCUMENT)
A-A-510 TACKER, STAPLER, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
A-A-511 NOT 1 SANDER POLISHER, TRANSLATORY ACTION, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
A-A-512 NOT 1 NAILER, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
A-A-516 NAILER, PNEUMATIC, HEAVY DUTY (NO S/S DOCUMENT)
A-A-52126 NOT 1 POLISHER, PORTABLE, ELECTRIC (NO S/S DOCUMENT)
A-A-521A NOT 1 SAW, CIRCULAR, GASOLINE ENGINE DRIVEN, PORTABLE (NO S/S DOCUMENT)
A-A-522 NOT 1 WRENCH, RATCHETING, PNEUMATIC (NO S/S DOCUMENT)
A-A-524 WRENCH, IMPACT, PNEUMATIC (NO S/S DOCUMENT)
A-A-527 NOT 1 DRILL, GASOLINE ENGINE DRIVEN (NO S/S DOCUMENT)
A-A-541 HONING UNIT, CYLINDER (NO S/S DOCUMENT)
A-A-542 NOT 1 HEAD, RIVET PULLING (NO S/S DOCUMENT)
A-A-543 HAMMER, PNEUMATIC, NAIL DRIVER (NO S/S DOCUMENT)
A-A-544 GRINDER, DIE, PNEUMATIC (NO S/S DOCUMENT)
A-A-569 NOT 1 POLISHER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-570 SANDER, OSCILLATING PAD, ELECTRIC PORTABLE (NO S/S DOCUMENT)
A-A-571A NOT 1 NUTRUNNER AND SCREWDRIVER, ELECTRIC (NO S/S DOCUMENT)
A-A-573 HAMMER, ROTARY, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-574 HAMMER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-576 NOT 1 DRILL, ELECTRIC, PORTABLE, 2 VARIABLE SPEEDS (NO S/S DOCUMENT)
A-A-577 NOT 1 SANDER POLISHER, TRANSLATORY ACTION, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
A-A-630 NOT 1 SCREWDRIVER, ELECTRIC, PORTABLE, BATTERY POWERED (NO S/S DOCUMENT)
AND10151 REV 3 DRIVE-SQUARE TANG AND SOCKET (S/S BY MS15774 AND MS15775)
GGG-B-001013(1) NOT 1 BIT, SCREWDRIVER (TORQ-SET) (NO S/S DOCUMENT)
GGG-B-00379A NOT 1 BIT, SCREWDRIVER (PHILLIPS TYPE) (USE MIL-B-9946/3)
GGG-B-00380 BIT, SCREWDRIVER, FLAT TIP (WITH GUIDE)
GGG-B-425 NOT 1 BLADE, RECIPROCATING SAW (S/S BY A-A-3088 AND A-A-3089)
GGG-C-330C NOT 1 CHISEL, TOOL BLANK, CALKING TOOL AND METAL-FORMING TOOL, POWER HAMMER (S/S BY A-A-3090 AND A-A-3091)
GGG-D-00786A NOT 1 DRIVERS, THREADED STUDS AND HEADED PINS (NO S/S DOCUMENT)
GGG-D-777B NOT 1 DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY) PIN, DRIVE, POWDER ACTUATED, AND CARTRIDGE, POWDER ACTUATED TOOL (NO S/S DOCUMENT)_
GGG-D-780A NOT 1 DRIVER, PROJECTILE UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) (NO S/S DOCUMENT)
GGG-E-2814 NOT 1 ETCHERS, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
GGG-N-1907 NOT 1 NUTRUNNER AND SCREWDRIVER, PNEUMATIC (NO S/S DOCUMENT)
GGG-N-398A(3) NOT 1 NUTRUNNER, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
GGG-R-425B NOT 1 RIVET SETS, PNEUMATIC TOOL (NO S/S DOCUMENT)
GGG-S-00114 SCRAPER, PAINT, ELECTRIC
GGG-S-00124 SCREWDRIVING ATTACHMENTS, PORTABLE POWER DRILL (WITH SETS OF SCREWDRIVER BITS)
GGG-S-00825A NOT 1 SWAGING TOOL, FLEXIBLE CABLE TERMINAL (NO S/S DOCUMENT)
GGG-S-282E SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) (S/S BY A-A-50459)
GGG-S-283A NOT 1 SHEARS, METAL CUTTING, PNEUMATIC (NO S/S DOCUMENT)
GGG-S-63C(3) NOT 1 SAW, CIRCULAR, PORTABLE, PNEUMATIC (NO S/S DOCUMENT)
GGG-S-72(2) SAW ATTACHMENT, RECIPROCATING, PORTABLE POWER TOOL
GGG-T-591 TOOLS, PNEUMATIC, PORTABLE (HAMMERS, RIVETERS, DRILLS, AND GRINDERS) (S/S BY OO-H-116, OO-R-421, OO-D-691, OO-G-669, OO-W-891)
H-B-771B NOT 1 BRUSHES, WIRE, ROTARY, GENERAL PURPOSE (NO S/S DOCUMENT)
JAN-D-428(3) DRILL, PORTABLE, PNEUMATIC, WOOD BORING
JAN-H-754 HAMMER, PNEUMATIC, RIVETING
JAN-H-794 HOLDER, CABLE-SPLICING
MIL-A-921A ANGLE ATTACHMENT, RIVETING HAMMER
MIL-A-9904A AUGER KIT, WATER CLOSET&PIPE AND SEWER, ELECTRIC
MIL-B-1252(1) BRUSHES, WIRE, ROTARY, CUP, AND RADIAL (DISC) (S/S BY MIL-B-19888B)
MIL-B-19888B(1) BRUSH, WIRE, ROTARY, GENERAL PURPOSE (USE H-B-771)
MIL-B-23801 NOT 1 BRUSH, WIRE AND BRUSHES, FIBER, ROTARY WHEEL (NO S/S DOCUMENT)
MIL-B-9946/11 NOT 1 BIT, SCREWDRIVER, PHILLIPS RIBBED, STANDARD AND LONG EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/12 NOT 1 BIT, SCREWDRIVER, TORQ-SET RIBBED, EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/13 NOT 1 BIT, SCREWDRIVER, TORQ-SET RIBBED, LONG EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/17 NOT 1 BIT, SCREWDRIVER, SIX SPLINE, STRAIGHT, LONGEXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/18 NOT 1 BIT, SCREWDRIVER, PHILLIPS, STANDARD AND LONG EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/19 NOT 1 BIT,SCREWDRIVER,TORQ -SET,EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-B-9946/20 NOT 1 BIT, SCREWDRIVER, TORQ -SET, LONG EXTERNAL HEX SHANK, POWER DRIVEN (NO S/S DOCUMENT)
MIL-C-11756 CHISELS, POWER HAMMER, COLD, FINISHED ROUND SHANK .680-INCH DIAMETER, 8 INCH OVERALL LENGTH, FLAT AND RIPPER
MIL-C-1244(1) CHISELS, CHISEL BLANKS, TOOLS, CALKING, FOR METAL
MIL-C-16195A COMPOUND, DIAMOND ABRASIVE, AND APPLICATOR GUN
MIL-C-19006A(1) NOT 1 CUTTER, FABRIC, PORTABLE, ELECTRIC (NO S/S DOCUMENT)
MIL-C-22376 CUTTER, FABRIC, PORTABLE, ELECTRIC, CIRCULAR KNIFE (USE MIL-C-19006)
MIL-C-22909B SUP 1 NOT 1 CRIMPING TOOL, TERMINAL AND CONNECTOR CONTACT, HYDRAULIC OPERATED
MIL-C-2641 CUTTER, GAUZE AND BANDAGE, ELECTRIC
MIL-D-18845 DRILL, ELECTRIC, ANGLE-MOUNTED CHUCK, 1/4 INCH CAPACITY IN STEEL (USE W-D-661)
MIL-D-23738C(1) DRILLS, ELECTRIC, PORTABLE, DOUBLE-INSULATED (DIELECTRIC HOUSING), RADIO INTERFERENCE SUPPRESSED (USE W-D-001114)
MIL-D-4127A DRILL, PNEUMATIC, PORTABLE (USE OO-D-691)
MIL-D-45097 DRIVER, PROJECTILE UNIT, POWDER-ACTUATED, MAGAZINE TYPE (USE GGG-D-777)
MIL-E-3118C(1) NOT 2 ETCHERS, ELECTRIC, PORTABLE, 120-VOLT A.C. (S/S BY A-A-59252)
MIL-E-43058A NOT 2 ETCHERS, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
MIL-F-18098B NOT 1 FLEXIBLE SHAFT MACHINE, ELECTRIC, ARMATURE SLOT CLEANING, PORTABLE (NO S/S DOCUMENT)
MIL-F-45803 FLEXIBLE SHAFT MACHINE, ELECTRIC (S/S BY 00-F-440)
MIL-G-24089A(1) GRINDER, ELECTRIC, PORTABLE, DOUBLE INSULATED, (SHOCKPROOF) RADIO INTERFERENCE SUPPRESSED (USE W-G-1115)
MIL-H-11689C NOT 1 HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING (S/S BY A-A-52553)
MIL-H-13859C(2) NOT 1 HONING UNIT, CYLINDRICAL BORE, PORTABLE (FOR CYLINDER CORRECTION) (S/S BY MIL-C-82069)
MIL-H-14485 HAMMER, PNEUMATIC, BODY AND FENDER REPAIR
MIL-H-19930 HONING UNIT, CYLINDRICAL BORE, PORTABLE (S/S BY MIL-H-13859B)
MIL-H-45189B HONING UNIT SET, CYLINDRICAL BORE, PORTABLE (USE MIL-C-82069A)
MIL-H-4583 HAMMERS, PNEUMATIC, RECIPROCATING, PLANISHING (SUPERSEDES 56&45&1)
MIL-H-52364B(1) NOT 1 HAMMER, ELECTRIC, PORTABLE, HAND (NO S/S DOCUMENT)
MIL-H-887B HAMMERS, ELECTRIC, PORTABLE, SCALING (USE 00-H-00103A)
MIL-I-43121A(1) NOT 1 INTERFERENCE REDUCTION FOR ELECTRIC HAND TOOLS (S/S BY MIL-STD-461)
MIL-L-19781A NOT 1 LIQUID MIXING ATTACHMENT, PORTABLE POWER DRILL (NO S/S DOCUMENT)
MIL-N-11151C NUT RUNNER AND SCREWDRIVERS, ELECTRIC
MIL-N-19703B NOT 1 NIBBLER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
MIL-N-26511/1 NUTRUNNER AND SCREWDRIVER, PISTOL GRIP, STRAIGHT HEAD, TYPE I
MIL-N-26511/2 NUTRUNNER AND SCREWDRIVERS, STRAIGHT HANDLE, STRAIGHT HEAD, TYPE II
MIL-N-26511/3 NUTRUNNER AND SCREWDRIVER, PISTOL GRIP, STRAIGHT HEAD, TYPE III
MIL-N-26511C NUTRUNNERS AND SCREWDRIVERS, PNEUMATIC POWERED, TORQUE CONTROLLED, PRECISION ACCURACY, GENERAL SPECIFICATION FOR (USE GGG-N-1907)
MIL-N-43464 NUT RUNNER AND SCREWDRIVER, PNEUMATIC (USE MIL-N-26511/3)
MIL-P-12790 PACKAGING AND PACKING OF GRINDER TL-484( )/U (DOMESTIC AND OVERSEAS SHIPMENT).
MIL-P-40096C(1) NOT 2 POLISHER, PORTABLE, ELECTRIC (S/S BY A-A-52126)
MIL-R-4286E NOT 1 RIVETER, PNEUMATIC, COMPRESSION TYPE, PORTABLE, WITH RIVET SETS (S/S BY A-A-52214)
MIL-R-45024D(3) NOT 1 ROTARY TOOL KIT, ELECTRIC (NO S/S DOCUMENT)
MIL-R-937B RIVET SQUEEZER, HAND
MIL-R-991 NOT 1 RIVETER, PNEUMATIC, ALLIGATOR YOKE (NO S/S DOCUMENT)
MIL-R-9917A RIVETER, PNEUMATIC, PIN SWAGED FASTENER, BLIND RIVETS AND BLIND BOLTS
MIL-R-9928 RIVETER, BLIND, PNEUMATIC (USE MIL-R-9917)
MIL-R-9939 RIVETER, BLIND PNEUMATIC, 1/8 - 3/16 INCH DIAMETER RIVETS (USE MIL-R-9917)
MIL-S-12069A SAW, CIRCULAR, PORTABLE, PNEUMATIC, 12-INCH BLADE
MIL-S-18631 NOT 1 SURFACER (SANDER), COMBINATION, BELT AND DISC, FLOOR MODEL (NO S/S DOCUMENT)
MIL-S-19875B(2) NOT 1 SCALING AND CHIPPING TOOL, ROTARY, PORTABLE, ELECTRIC, FUNCTIONAL OR DOUBLE INSULATED, AND CUTTER BUNDLES (NO S/S DOCUMENT)
MIL-S-23492B(3) NOT 1 SCALER, NEEDLE TYPE, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
MIL-S-24115A(1) SANDER, DISK, ELECTRIC, PORTABLE, DOUBLE INSULATED (SHOCKPROOF) RADIO INTERFERENCE SUPPRESSED (USE 00-S-1116)
MIL-S-24273 NOT 1 STAND, PORTABLE ELECTRIC DRILL, ELECTROMAGNETIC, UNIVERSAL (NO S/S DOCUMENT)
MIL-S-24276A NOT 1 SCALING AND CHIPPING TOOL, ROTARY, PORTABLE, PNEUMATIC WITH CUTTER BUNDLES (NO S/S DOCUMENT)
MIL-S-24473B NOT 1 SAW, CIRCULAR, ELECTRIC, PORTABLE, DOUBLE INSULATED (NO S/S DOCUMENT)
MIL-S-38265A SAW, CIRCULAR BLADE, METAL-CUTTING MXU-346/E GASOLINE-ENGINE-DRIVEN, PORTABLE
MIL-S-4083C NOT 1 SAW, RECIPROCATING, PORTABLE, PNEUMATIC, METAL-CUTTING (S/S BY A-A-52593)
MIL-S-4243C(2) NOT 2 SHAVER, RIVET HEAD, PORTABLE, PNEUMATIC MICROMETER ADJUSTMENT (S/S BY A-A-58066)
MIL-S-4569C NOT 1 SHAFT ASSEMBLY FLEXIBLE DRIVE WITH 1/4 INCH CAPACITY CHUCK (NO S/S DOCUMENT)
MIL-S-4876B SAW, CIRCULAR, METAL CUTTING, PORTABLE, TYPE A-2 (USE MIL-S-38265)
MIL-S-5676A(1) NOT 1 SPLICING, CABLE TERMINAL, PROCESS FOR, AIRCRAFT (S/S BY SAE-AS56761)
MIL-S-9838(1) SANDER-POLISHER, PORTABLE (SEE FED SPEC OO-S-90 AND OP-S-101
MIL-S-9844A(1) SAW, RECIPROCATING, PORTABLE, ELECTRIC (USE W-S-0090)
MIL-STD-1337B NOT 1 GENERAL SUPPRESSION SYSTEM DESIGN REQUIREMENTS FOR PORTABLE ELECTRIC HAND TOOLS (S/S BY MIL-STD-461, MIL-STD-462)
MIL-STD-228 PORTABLE PNEUMATIC TOOLS; CLASSIFICATION OF DEFECTS FOR (NO S/S DOCUMENT)
MIL-T-2792 TOOL, POWDER-ACTUATED, PORTABLE VALIDATED JUL 1964
MIL-T-83508/2 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 2, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/4 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 1, FOR WRAPPING (NO S/S DOCUMENT)
MIL-T-83508/6 NOT 1 TOOL, SOLDERLESS WRAP, HAND OR POWER ACTUATED, WIRE TERMINATION, TYPE 3, FOR WRAPPING (NO S/S DOCUMENT)
MIL-W-11452 WHEEL, FELT, POLISHING, SIZE 6-INCH BY 1-INCH, 5/8-INCH ARBOR HOLE (USE GGG-W-301B)
MIL-W-17663B(1) WHEEL, ABRASIVE, MOUNTED (POINTS) (USE ANSI B7.1, ANSI B74.2 & ANSI B74.13)
MIL-W-24472 NOT 1 WRENCH, IMPACT, ELECTRIC, PORTABLE, DOUBLE INSULATED (NO S/S DOCUMENT)
MIL-W-26707 WRENCHES, PNEUMATIC, REVERSIBLE IMPACT (SUPERSEDES MIL-W-4205) (USE 00-W-891)
MIL-W-43060B NOT 2 WHEELS, ABRASIVE (DEPRESSED CENTER) (S/S BY GGG-W-290)
MIL-W-81840 NOT 2 WHEELS, PEENING, ROTARY FLAP (NO S/S DOCUMENT)
MS16576 ADAPTERS, SOCKET WRENCH, ATTACHMENT POWER DRIVE
MS16577 EXTENSIONS, SOCKET WRENCH, ATTACHMENT SOLID BAR, POWER DRIVE
MS16578 SOCKETS, SOCKET WRENCH, DOUBLE SQUARE (8-POINT), LONG LENGTH, POWER DRIVE
MS16579 SOCKETS, SOCKET WRENCH, HEXAGON, (6 POINT), LONG LENGTH, POWER DRIVE
MS16580 SOCKETS, SOCKET WRENCH, DOUBLE SQUARE (8-POINT), REGULAR LENGTH, POWER DRIVE
MS16581 SOCKETS, SOCKET WRENCH, HEXAGON (6 POINT), REGULAR LENGTH, POWER DRIVE
MS16582 SOCKETS, SOCKET WRENCH, UNIVERSAL JOINT, HEXAGON, (6-POINT) POWER DRIVE
MS16583 UNIVERSAL JOINT ATTACHMENTS, SOCKET WRENCH, POWER DRIVE
MS16772 SHEARS, METAL CUTTING, ELECTRIC, PORTABLE
MS25441C NOT 1 CRIMPING TOOL, TERMINAL, HYDRAULIC OPERATED, WIRE SIZE 8 THRU 4/0
MS26506 NOT 2 CUTTER, CABLE, AERIAL TOW TARGET, MK VII (NO S/S DOCUMENT)
OO-F-440C FLEXIBLE-SHAFT MACHINE, ELECTRIC (BUFFING AND GRINDING, PORTABLE, FLOOR STAND)
OO-G-669G NOT 1 GRINDER, PNEUMATIC, HORIZONTAL AND VERTICAL (NO S/S DOCUMENT)
OO-H-103B(1) NOT 1 HAMMER, ELECTRIC, PORTABLE AND HAMMER DRILLS, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
OO-H-116D NOT 1 HAMMERS, PNEUMATIC, PORTABLE (CHIPPING AND SCALING) (NO S/S DOCUMENT)
OO-H-116D(I2) NOT 1 HAMMERS, PNEUMATIC, PORTABLE (CHIPPING AND SCALING) (NO S/S DOCUMENT)
OO-R-421B(2) NOT 1 RIVETER, PNEUMATIC, JAM AND HAMMER; AND HOLDER-ON, PORTABLE (S/S BY A-A-3049)
OO-S-001116A NOT 1 SANDER, ELECTRIC, PORTABLE, BELT, DISK AND ORBITAL PAD, DOUBLE INSULATED (NO S/S DOCUMENT)
OO-S-0095 SANDER, PNEUMATIC, 4-INCH DISK, PORTABLE (S/S BY OO-S-101)
OO-S-101B(1) NOT 1 SANDER, DISK AND OSCILLATING PAD, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
OO-S-246D NOT 1 SAW, RECIPROCATING, WOODWORKING, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
OO-S-90C NOT 1 SANDERS, ELECTRIC, PORTABLE, BELT, DISK, AND OSCILLATING PAD (S/S BY A-A-3044, A-A-3092, A-A-3093)
OO-S-90C(I1) NOT 1 SANDERS, ELECTRIC, PORTABLE, BELT, DISK, AND OSCILLATING PAD (S/S BY A-A-3044. A-A-3092AND A-A-3093)
OO-W-891E(1) NOT 2 WRENCH, IMPACT, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
QPL-16195-2 COMPOUND, DIAMOND ABRASIVE AND APPLICATOR GUN
QPL-16714-13 WHEEL, ABRASIVE, SNAGGING (USE GGG-W-290)
QPL-17663-21 WHEEL, ABRASIVE, MOUNTED (POINTS)
QPL-19875-14 NOT 1 SCALING AND CHIPPING TOOL, ROTARY, PORTABLE, ELECTRIC, FUNCTIONAL OR DOUBLE INSULATED, AND CUTTER BUNDLES (NO S/S DOCUMENT)
QPL-19888-10 BRUSH, WIRE, ROTARY, GENERAL PURPOSE
QPL-23492-9(1) NOT 1 SCALER, NEEDLE TYPE, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
QPL-23738-6 DRILL, ELECTRIC, PORTABLE, DOUBLE-INSULATED, (DIELECTRIC HOUSING), RADIO INTERFERENCE SUPPRESSED
QPL-24089-2 GRINDER, ELECTRIC, PORTABLE, DOUBLE INSULATED (SHOCKPROOF) RADIO INTERFERENCE SUPPRESSED
QPL-24115-1 SANDER, DISK, ELECTRIC, PORTABLE, DOUBLE INSULATED (SHOCKPROOF), RADIO INTERFERENCE SUPPRESSED
QPL-24276 NOT 2 SCALING AND CHIPPING TOOL, ROTARY, PORTABLE, PNEUMATIC WITH CUTTER BUNDLES GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-24472 NOT 2 WRENCH, IMPACT, ELECTRIC, PORTABLE, DOUBLE-INSULATED (NO S/S DOCUMENT)
QPL-24473 NOT 2 SAN, CIRCULAR, ELECTRIC, PORTABLE, DOUBLE INSULATED (NO S/S DOCUMENT)
QPL-4127-6 DRILL, PNEUMATIC, PORTABLE
QPL-887-7 HAMMERS, ELECTRIC, SCALING, PORTABLE
QPL-GGG-D-777-15 NOT 1 DRIVER, PROJECTILE UNIT, POWER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY), PIN, DRIVE, POWER ACTUATED, AND CARTRIDGE, POWER ACTUATED TOOL (NO S/S DOCUMENT)
QPL-GGG-N-398-11 NOT 1 NUT RUNNER, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
QPL-GGG-S-63-19 NOT 2 SAW, CIRCULAR, PORTABLE, PNEUMATIC (NO S/S DOCUMENT)
QPL-H-B-771-15 BRUSH, WIRE, ROTARY, GENERAL PURPOSE
QPL-OO-D-691-64 NOT 1 DRILL, PNEUMATIC, PORTABLE, AND BORER, WOOD, PNEUMATIC (NO S/S DOCUMENT)
QPL-OO-G-669-61(2) NOT 1 GRINDER, PNEUMATIC, HORIZONTAL AND VERTICAL (NO S/S DOCUMENT)
QPL-OO-H-103-6 HAMMER, ELECTRIC, PORTABLE AND HAMMER-DRILLS, ELECTRIC, PORTABLE
QPL-OO-H-116-33 NOT 1 HAMMER, PNEUMATIC, PORTABLE, (CHIPPING AND SCALING) (NO S/S DOCUMENT)
QPL-OO-R-421-36 NOT 1 RIVETER, PNEUMATIC, JAM AND HAMMER, AND HOLDER-ON, PORTABLE (NO S/S DOCUMENT)
QPL-OO-S-001116-5 NOT 1 SANDER, ELECTRIC, PORTABLE, BELT DISK AND ORBITAL PAD, DOUBLE INSULATED (NO S/S DOCUMENT)
QPL-OO-W-891-68(2) NOT 1 WRENCH, IMPACT, PNEUMATIC, PORTABLE (NO S/S DOCUMENT)
QPL-W-D-1114-14 NOT 1 DRILL, ELECTRIC, PORTABLE, DOUBLE-INSULATED (DIELECTRIC HOUSING) (NO S/S DOCUMENT)
QPL-W-G-1115-3 NOT 1 GRINDER, ELECTRIC, PORTABLE, DOUBLE INSULATED (DIELECTRIC HOUSING) (NO S/S DOCUMENT)
W-D-650A NOT 1 DRILL, ELECTRIC, PORTABLE (BATTERY POWERED) AND ACCESSORIES (NO S/S DOCUMENT)
W-D-661E NOT 1 DRILLS, ELECTRIC, PORTABLE (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL (NO S/S DOCUMENT)
W-G-1115A NOT 1 GRINDER, ELECTRIC, PORTABLE, DOUBLE INSULATED (DIELECTRIC HOUSING) (NO S/S DOCUMENT)
W-G-663B NOT 1 GRINDER, ELECTRIC, PORTABLE (NO S/S DOCUMENT)
W-G-671(2) GRINDER, VALVE SEAT, ENGINE (MOTOR VEHICLE)
W-S-90C NOT 1 SAW, RECIPROCATING, PORTABLE, ELECTRIC (NO S/S DOCUMENT)
W-W-650C NOT 1 WRENCH, IMPACT, ELECTRIC (NO S/S DOCUMENT)
W-W-650C(I3) NOT 1 WRENCH, IMPACT, ELECTRIC (NO S/S DOCUMENT)
A-A-50459A 剪，金属切削，电气（便携式） SHEARS, METAL CUTTING, ELECTRIC (PORTABLE)
A-A-52214 铆枪，气动，压缩式，便携式，与铆钉套 RIVETER, PNEUMATIC, COMPRESSION TYPE, PORTABLE, WITH RIVET SETS
A-A-52553 NOT 1 锤，气动，便携，指甲驾驶 HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING
A-A-52593 看到往复，便携式，气动：金属切削 SAW RECIPROCATING, PORTABLE, PNEUMATIC: METAL CUTTING
A-A-58066 剃须刀，铆钉头，便携式，气动 SHAVER, RIVET HEAD, PORTABLE, PNEUMATIC
A-A-59252 NOT 1 etchers ，电气，便携式， 120伏a.c. ETCHERS, ELECTRIC, PORTABLE, 120-VOLT A.C.
A-A-59642 演练中，气动，便携式 DRILL, PNEUMATIC, PORTABLE
ASME-B107.16 剪（金属切削，台秤和手） SHEARS (METAL CUTTING, BENCH AND HAND)
ASME-B107.4 工具，便携式手，空气，和电动，驾驶及主轴两端为 TOOLS, PORTABLE HAND, AIR, AND ELECTRIC, DRIVING AND SPINDLE ENDS FOR
GGG-D-650B 演练中，砌体，扶轮驱动（芯） DRILL, MASONRY, ROTARY DRIVEN (CORELESS)
GGG-D-694A(2) 演练中，砌体，扶轮驱动 DRILL, MASONRY, ROTARY DRIVEN
GGG-D-694A(I3) 演练中，砌体，扶轮驱动 DRILL, MASONRY, ROTARY DRIVEN
GGG-S-51E 看到，通告，便携式，电动 SAW, CIRCULAR, PORTABLE, ELECTRIC
GGG-W-660A 插座，套筒扳手及附件（电力驱动的冲击扳钳） SOCKET, SOCKET WRENCH AND ATTACHMENTS (FOR POWER DRIVEN IMPACT WRENCHES)
MIL-C-22520/23 卷曲工具，码头，手部或电力驱动，电线终止，气动工具，电线每桶大小0000通过8 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8
MIL-C-22520/28 卷曲工具，码头，手部或电力驱动，电线终止，气动工具，电线每桶大小20 28 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 20 THROUGH 28
MIL-C-22520/29 卷曲工具，码头，手部或电力驱动，电线终止，气动工具，电线每桶大小12 20 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 12 THROUGH 20
MIL-C-22520/30 卷曲工具，码头，手部或电力驱动，电线终止，配件的硬件mil-c-22520/28和mil-c-22520/29工具 CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, ACCESSORY HARDWARE FOR MIL-C-22520/28 AND MIL-C-22520/29 TOOLS
A-A-478 NOT 1 DRILL, TWIST, DOUBLE END (NO S/S DOCUMENT)
A-A-501 NOT 1 COUNTERBORE SET (NO S/S DOCUMENT)
A-A-503 DRILL, SET, CARBIDE, NUMBER SIZE (NO S/S DOCUMENT)
A-A-517 NOT 1 DRILL, TWIST, 1/4 INCH SHANK (NO S/S DOCUMENT)
GGG-B-383C NOT 1 BITS, WOOD-BORING; AND CHISELS, MORTISING, HOLLOW (NO S/S DOCUMENT)
GGG-C-613D NOT 1 COUNTERSINKS, AND COUNTERSINKS AND DRILLS (NO S/S DOCUMENT)
GGG-D-647A NOT 1 DRILL BLANKS AND DRILL BLANK SETS (NO S/S DOCUMENT)
GGG-D-751D NOT 1 DRILLS, TWIST (TAPER-SQUARE STRAIGHT, AND TAPER-ROUND SHANKS) (NO S/S DOCUMENT)
MIL-B-52390A NOT 1 BIT, AUGER, SHIP, WITH SCREW POINT
MIL-C-932 COUNTERSINK, HIGH-SPEED STEEL, STRAIGHT SHANK, 78 DEG., 82 DEG., AND 100 DEG.
MIL-D-15845 DRILLS, TWIST (S/S BY GGG-D-00751)
MIL-H-4081B(3) NOT 1 HOLDER, COUNTERSINK, ADJUSTABLE, MICROMETER STOP AND CUTTERS, COUNTERSINK
MS15444B DRILL, TWIST, HIGH SPEED STEEL, STRAIGHT ROUND SHANK SHORT LENGTH (NO S/S DOCUMENT)
MS15445B DRILL, TWIST, ASA TAPER (MORSE) SHANK, HIGH SPEED STEEL (USE GGG-D-751)
MS16295 COUNTERSINKS, BACK (USE GGG-C-613
MS16296 COUNTERSINKS, BITSTOCK SHANK, REGULAR (USE GGG-C-613, TYPE 11 CLASS A)
MS16297 COUNTERSINKS, BITSTOCK SHANK, ROSE (USE GGG-C-613, TYPE 11 CLASS B)
MS16298 COUNTERSINKS, BITSTOCK SHANK, SNAIL (,S,) (USE GGG-C-613)
MS16299A COUNTERSINK, BITSTOCK SHANK, STEPPED BODY (GGG-C-613)
MS16300 COUNTERSINKS AND DRILLS COMBINED, 60 DEGREE AND 120 DEGREE FLUTES (USE GGG-C-613)
MS16301 COUNTERSINKS, STRAIGHT SHANK, CENTER REAMER PATTEN, SHORT (USE GGG-C-613)
MS16302 COUNTERSINKS, STRAIGHT SHANK, CENTER REAMER PATTERN, LONG (USE GGG-C-613)
MS16303 COUNTERSINKS, TAPER SHANK, AMERICAN STANDARD, TAPER, (MORSE) (USE GGG-C-613)
MS16304 COUNTERSINKS,AND DRILLS, COMBINED, 60 DEGREE FLUTES (USE GGG-C-613)
MS17076A DRILL, TWIST, HIGH SPEED STEEL, STREIGHT ROUND SHANK, LONG LENGTH (USE GGG-D-751, TYPE B, CLASS 2)
QPL-GGG-D-751-48 NOT 1 DRILLS, TWIST (TAPER-SQUARE, STRAIGHT, AND TAPER-ROUND SHANKS) (NO S/S DOCUMENT)
A-A-58075 持有人： countersink ，可调微米停止 HOLDER: COUNTERSINK, ADJUSTABLE MICROMETER STOP
A-A-58076 刀具， countersinks CUTTER, COUNTERSINKS
A-A-1267A NOT 1 TAP, THREAD CUTTING (SPIRAL POINTED) (S/S BY ANSI-B94.9)
A-A-305 NOT 1 THEAD CUTTER, RECEDING SEGMENTAL DIE (ADJUSTABLE CEARED DIESTOCK) (NO S/S DOCUMENT)
A-A-306 NOT 1 THREAD CUTTER, RECEDING SEGMENTAL DIE (SELF CONTAINED RATCHET THREADER) (NO S/S DOCUMENT)
A-A-311A NOT 1 THREAD CUTTER, DIE HEAD, HAND (NO S/S DOCUMENT)
A-A-345 NOT 1 THREAD CUTTER, RECEDING SEGMENTAL DIE (POST TYPE RATCHET THREADER) (NO S/S DOCUMENT)
A-A-363 NOT 1 DIESTOCK (FOR RECTANGULAR, TWO PIECE DIES) (NO S/S DOCUMENT)
A-A-364 NOT 1 TAP, THREAD CUTTING (NPT AND NPS SERIES) (NO S/S DOCUMENT)
A-A-367 NOT 1 DIE, THREAD CUTTING (RECTANGULAR, TWO-PIECE PIPE DIES) (NO S/S DOCUMENT)
A-A-368 NOT 1 DIE, THREAD CUTTING (SOLID SQUARE DIES) (NO S/S DOCUMENT)
A-A-411 NOT 1 DIE, THREAD CUTTING (ROUND, SPLIT, METRIC SERIES) (NO S/S DOCUMENT)
A-A-412 NOT 1 DIE AND COLLET (TWO PIECE DIES WITH COLLETS) (NO S/S DOCUMENT)
A-A-413 NOT 1 DIE, RETHREADING (HEXAGON) (NO S/S DOCUMENT)
A-A-414 NOT 1 DIE STOCK (FOR ROUND, SPLIT DIES) (NO S/S DOCUMENT)
A-A-415 NOT 1 DIESTOCK (FOR ROUND, COLLET DIES) (NO S/S DOCUMENT)
A-A-624A NOT 1 TAP, THREAD CUTTING (GROUND, HIGH SPEED STEEL, REGULAR, MACHINE SCREW TAPS) (S/S BY ANSI-B94.9)
A-A-625A NOT 1 TAP, THREAD CUTTING (REGULAR, FRACTIONAL INCH SIZES) (S/S BY ANSI-B94.9)
GGG-D-296B(1) NOT 1 DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE, AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) (S/S BY A-A-411, A-A-412, A-A-413, A-A-414, AND A-A-415)
GGG-T-581B NOT 1 TAPS, DIES, DIESTOCKS, AND THREADING SET-PIPE THREADING, HAND (S/S BY A-A-305, A-A-306, A-A-311, A-A-345, A-A-363, A-A-364, A-A-367, OR A-A-368)
GGG-T-581B(I1) NOT 1 TAPS, DIES, DIESTOCKS, AND THREADING SET-PIPE THREADING, HAND (S/S BY A-A-305, A-A-306, A-A-311, A-A-345, A-A-363, A-A-364, A-A-367, OR A-A-368)
GGG-T-60A NOT 1 TAPS, THREAD CUTTING, CARBON STEEL, HAND CUT THREAD, AMERICAN NATIONAL AND METRIC THREAD FORM, SCREW AND BOLT (S/S BY ANSI-B94.4)
GGG-T-70B(1) NOT 1 TAP, THREAD CUTTING, (STANDARD, AMERICAN NATIONAL FORM AND METRIC SPARK PLUG THREAD, HIGH-SPEED STEEL, GROUND THREAD, HAND) (S/S BY ANSI-B94.9)
GGG-T-80A NOT 1 TAP, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
JAN-T-1084 TAPS, DIES, TAP-WRENCHES, AND DIESTOCKS (USE GGG-T-60, GGG-D-296, GGG-W-680, GGG-T-330 AND GGG-T-581)
MIL-C-45854B(2) NOT 3 CHASERS, THREAD, HAND (THREAD COMB) (NO S/S DOCUMENT)
MIL-D-14543B NOT 1 DIE, RETHREADING, AXLE (NO S/S DOCUMENT)
MIL-D-15834 DIES, SCREW AND BOLT THREADING, BOLT RETHREADING AND DIE-STOCKS (S/S BY GGG-D-296)
MIL-D-4562(1) NOT 1 DIE, THREADING, DIE HEAD (S/S BY A-A-50695)
MIL-T-15766A TAPS, THREADING, HAND, COMMERCIAL AND PRECISION GROUND, TAP WRENCHES AND STANDARD THREADING SETS (S/S BY GGG-T-71)
MS15303A DIE, METAL STAMPING, HAND, INSPECTION AND ACCEPTANCE, DEPARTMENT OF DEFENSE
MS17049A THREAD CUTTER, DIE HEAD, HAND (NO S/S DOCUMENT)
MS23002D NOT 1 DIE, CRIMPING TOOL - FOR USE WITH MS25036, SIZE 8 THROUGH 4/0 TERMINALS
MS3150 NOT 1 DIES FOR CRIMPING MS3190 TYPE B CONTACT WIRE BARRELS (INSTALL DIES IN MS25441-1 HEAD) (NO S/S DOCUMENT)
QPL-GGG-T-581-9 TAPS, DIES, DIESTOCKS AND THREADING SET, PIPE THREADING, HAND
A-A-410 NOT 2 模具，螺纹切削（轮，分裂，英寸系列） DIE, THREAD CUTTING (ROUND, SPLIT, INCH SERIES)
A-A-50695 死了，线程模头 DIES, THREADING DIE HEAD

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点