〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
MS24674D(1)
NOT 1 SCREW, CAP, SOCKET-HEAD, HEXAGON, DRILLED CORROSION RESISTING STEEL
(UNC-3A) (S/S BY NASM24674)
MS24675B SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED ALLOY STEEL, UNCOATED
(UNF-3A) (USE MS 24678)
MS24676A SCREW, CAP-SOCKET HEAD, HEXAGON, DRILLSD ALLOY STEEL, UNCOATED
(UNC-3A) (USE MS24677)
MS24677D NOT 1 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED ALLOY STEEL,
(UNC-3A) (S/S BY NASM24677)
MS24678E NOT 1 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED ALLOY STEEL,
(UNF-3A) (S/S BY NASM24678)
MS24693K NOT 1 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG., CROSS
RECESSED, UNC-2A AND UNF-2A (S/S BY NASM24693)
MS24694C(1) NOT 1 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG., STRUCTURAL,
CROSS RECESSED, UNC-3A AND UNF-3A (S/S BY NASM24694)
MS25087B NOT 2 SCREW, EXTERNALLY RELIEVED BODY (S/S BY NASM25087)
MS25332(1) NOT 1 SCREW AND WASHER ASSEMBLY, RELAY SOCKET MOUNTING
MS27039F NOT 2 SCREW, MACHINE - PAN HEAD, STRUCTURAL, CROSS RECESSED (S/S
BY NASM27039)
MS27577F NOT 1 SCREW, CLOSE TOLERANCE, 95 KSI FSU, FLUSH HEAD, 450 DEG.
F (S/S BY NASM27577)
MS3212B NOT 2 SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING,
INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING (S/S BY NASM3212)
MS3213A NOT 2 SCREWS, MACHINE, PAN HEAD, CROSS RECESSED, SELF SEALING,
INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF LOCKING (S/S BY NASM3213)
MS33648 ELEMENTS, SELF-LOCKING, 250 DEG F EXTERNALLY THREADED FASTENER,
DESIGN INFORMATION FOR (ASG) (USE MIL-F-18240, FIGURE 1)
MS33749 NOT 2 SCREW - INSTALLATION AND LIMITATIONS FOR USAGE OF THREAD
CUTTING AND THREAD FORMING (S/S BY NASM33749)
MS35188 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, PLAIN FINISH, NC-2A & UNC-2A
MS35189 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, PLAIN FINISH, NF-2A & UNF-2A
MS35190F NOT 1 SCREW, MACHINE-82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED,
CARBON STEEL, CADMIUM PLATED, UNC-2 (S/S BY NASM35190)
MS35191G NOT 1 SCREW, MACHINE-82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED,
CARBON STEEL, CADMIUM PLATED, UNF-2A (S/S BY NASM35191)
MS35192 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, CADMIUM OR ZINC PLATED, NC-2A & UNC-2A
MS35193 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, CADMIUM OR ZINC PLATED, NF-2A & UNF-2A
MS35194 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, PHOSPHATE COATED, NC-2A & UNC-2A
MS35195 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON
STEEL, PHOSPHATE COATED, NF-2A & UNF-2A
MS35196 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, BRASS,
PLAIN FINISH, NC-2A & UNC-2A
MS35197 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, BRASS,
PLAIN FINISH, NF-2A & UNF-2A
MS35198D(1) NOT 1 SCREW, MACHINE-FLAT COUNTERSUNK HEAD, 82 DEG., CROSS-RECESSED,
BRASS, UNC-2A (S/S BY NASM35198)
MS35199B(1) NOT 2 SCREW, MACHINE-FLAT COUNTERSUNK HEAD, 82 DEG., CROSS-RECESSED,
BRASS, BLACK-CHEMICAL FINISH, UNF-2A (S/S BY NASM35199)
MS35200 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION
RESISTING STEEL, PASSIVATED, NC-2A - UNC-2A (S/S BY MS-51959)
MS35201A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CORROSION
RESISTING STEEL, PASSIVATED, NF-2A.- UNF-2A (USE MS51960)
MS35202C NOT 3 SCREW, MACHINE-FLAT COUNTERSUNK HEAD, 82 DEG., CROSS-RECESSED,
ALUMINUM ALLOY, ANODIC COATED, UNC-2A (S/S BY NASM35202)
MS35204 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, PLAIN
FINISH, NC-2A - UNC-2A (USE MS-35206)
MS35205 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, PLAIN
FINISH, NF-2A - UNF-2A (USE MS-35207)
MS35206H(1) NOT 1 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED CARBON STEEL,
CADMIUM PLATED, UNC-2A (S/S BY NASM35206)
MS35207F(2) NOT 1 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL,
CADMIUM PLATED, UNF-2A (IN./MM) (S/S BY NASM35207)
MS35208 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADIUM
OR ZINC PLATED, NC-2A-UNC-2A (S/S BY MS35206D)
MS35209 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM
OR ZINC PLATED, NF-2A & UNF-2A
MS35210 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, PHOSPHATE
COATED, NC-2A - UNC-2A (USE MS-35206)
MS35211 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, PHOSPHATE
COATED, NF-2A - UNF-2A (USE MS-35207)
MS35212A SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH,
NC-2A & UNC-2A
MS35213A SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH,
NF-2A & UNF-2A
MS35214D(1) NOT 1 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, BRASS, UNC-2A
(S/S BY NASM35214)
MS35215C(1) NOT 1 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, BRASS, UNF-2A
(S/S BY NASM35215)
MS35216 SCREW, MACHINE, PAN HEAD, CROSS RECESSED, CORROSION RESISTING
STEEL, PASSIVATED, NC-2A - UNC-2A (S/S BY MS-51957)
MS35217 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTING
STEEL, PASSIVATED, NF-2A - UNF-2A (S/S BY MS-51958)
MS35218B(1) NOT 1 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, ALUMINUM ALLOY,
UNC-2A
MS35219B(1) NOT 2 SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, ALUMINUM ALLOY,
UNF-2A
MS35221 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, PLAIN FINISH,
NC-2A AND UNC-2A
MS35222A SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, PLAIN FINISH,
NF-2A AND UNF-2A (S/S BY MS35207)
MS35223B(1) NOT 1 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM
PLATED, NC-2A AND UNC-2A
MS35224 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM PLATED,
NF-2A AND UNF-2A
MS35225 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM OR PLATED,
NC-2A AND UNC-2A
MS35226 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM OR ZINC
PLATED, NF-2A AND UNF-2A
MS35227 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, PHOSPHATE COATED,
NC-2A AND UNC-2A
MS35228 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, PHOSPHATE COATED,
NF-2A AND UNF-2A
MS35229 SCREW, MACHINE, PAN HEAD, SLOTTED, BRASS, PLAIN FINISH, NC-2A
AND UNC-2A (USE MS-35214
MS35230A SCREW, MACHINE, PAN HEAD, SLOTTED, BRASS PLAIN FINISH, NF-2A
AND UNF-2A (S/S BY MS35215)
MS35231A SCREW, MACHINE, PAN HEAD, SLOTTED, BRASS, BLACK OXIDE FINISH,
NC-2A AND UNC-2A (S/S BY MS35214)
MS35232 SCREW, MACHINE, PAN HEAD, SLOTTED, BRASS, BLACK OXIDE FINISH,
NF-2A AND UNF-2A
MS35233A SCREW, MACHINE, PAN HEAD, SLOTTED CORROSION RESISTING STEEL,
PASSIVATED, NC-2A-UNC-2A (S/S BY MS51957)
MS35234 SCREW, MACHINE, PAN HEAD, SLOTTED, CORROSION RESISTING STEEL,
PASSIVATED, NF-2A AND UNF-2A (S/S BY MS 51958)
MS35235 SCREW, MACHINE, PAN HEAD, SLOTTED, ALUMINUM ALLOY, ANODIZED, NC-2A
AND UNC-2A
MS35236 SCREW, MACHINE, PAN HEAD, SLOTTED, ALUMINUM ALLOY, ANODIZED, NF-2A
AND UNF-2A
MS35237 SCREW,MACHINE,FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL, PLAIN
FINISH, NC-2A AND UNC-2A (USE MS-35190)
MS35238A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
PLAIN FINISH, NF-2A AND UNF-2A (S/S BY MS 35191 )
MS35239A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
CADMIUM PLATED, NC-2A AND UNC-2A (S/S BY MS35190)
MS35240 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
CADIUM PLATED, NF-2A AND UNF-2A (S/S BY MS 35191)
MS35241A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
CADMIUM OR ZINC PLATED, NC-2A AND UNC-2A (USE MS 35190)
MS35242A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
CADIUM OR ZINC PLATED, NF-2A AND UNF-2A (SUPERSED BY MS 35191)
MS35243A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
PHOSPHATE COATED, NC-2A AND UNC-2A (S/S BY MS 35190)
MS35244A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CARBON STEEL,
PHOSPHATE COATED, NF-2A AND UNF-2A
MS35245 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, BRASS, PLAIN FINISH,
NC-2A, AND UNC-2A (USE MS35198)
MS35246 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, BRASS, PLAIN FINISH,
NF-2A AND UNF-2A
MS35247 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, BRASS, BLACK OXIDE
FINISH, NC-2A AND UNC-2A
MS35248 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, BRASS, BLACK OXIDE
FINISH, NF-2A AND UNF-2A
MS35249A SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, CORROSION RESISTING
STEEL, PASSIVATED, NC-2A AND UNC-2A SUPERSEDED BY MS-51959 OR MS-24671
MS35250A SCREW, MACHINE, FLAT, COUNTERSUNK HEAD, SLOTTED, CORROSION RESISTING
STEEL, PASSIVATED NF-2A AND UNF-2A (S/S BY MS51960)
MS35251 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, ALUMINUM ALLOY,
ANODIZED, NC-2A AND UNC-2A
MS35262 SCREW, MACHINE, FLAT COUNTERSUNK HEAD, SLOTTED, ALUMINUM ALLOY,
ANODIZED, NF-2A AND UNF-2A
MS35263 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
PLAIN FINISH, NC-2A AND UNC-2A
MS35264 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
PLAIN FINISH, NF-2A AND UNF-2A
MS35265C NOT 2 SCREW, MACHINE DRILLED FILLISTER HEAD, SLOTTED, CARBON
STEEL, UNC-2A
MS35266C NOT 3 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CARBON
STEEL, UNF-2A
MS35267 SCREW, MACHINE, DIRLLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
CADMIUM OR ZINC PLATED NC-2A AND UNC-2A
MS35268 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
CADMIUM OR ZINC PLATED, NF-2A AND UNF-2A
MS35269 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
PHOSPHATE COATED, NC-2A AND UNC-2A
MS35270 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL,
PHOSPHATE COATED, NF-2A AND UNF-2A
MS35271A SCREW, MACHINE, DRILLED, FILLISTER HEAD, SLOTTED, BRASS, PLAIN
FINISH, NC-2A AND UNC-2A (S/S BY MS35273)
MS35272 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, BRASS, PLAIN FINISH
NF-2A AND UNF-2A (S/S BY MS-35274)
MS35273C(1) NOT 2 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, BRASS,
BLACK CHEMICAL FINISH, UNC-2A (S/S BY NASM35273)
MS35274C(1) NOT 1 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, BRASS,
BLACK CHEMICAL FINISH, UNF-2A (S/S BY NASM35274)
MS35275B(1) NOT 2 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CORROSION
RESISTING STEEL, PASSIVATED, UNC-2A (S/S BY NASM35275)
MS35276C(1) NOT 1 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CORROSION
RESISTING STEEL, PASSIVATED, UNF-2A (S/S BY NASM35276)
MS35277B(1) NOT 2 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, ALUMINUM
ALLOY, UNC-2A
MS35278B(1) NOT 2 SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, ALUMINUM
ALLOY, UNF-2A
MS35289 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
PLAIN FINISH, UNC-2A
MS35290 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
PLAIN FINISH, UNF-2A
MS35291 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
CADMIUM OR ZINC FINISH, UNC-2A
MS35292 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
CADMIUM OR ZINC FINISH, UNF-2A
MS35293 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
PHOSPHATE FINISH, UNC-2A
MS35294 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), LOW CARBON STEEL,
PHOSPHATE FINSIH, UNF-2A
MS35295B NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM
CARBON STEEL, PLAIN FINISH UNC-2A
MS35296 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON
STEEL, PLAIN FINISH, UNF-2A
MS35297 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON
STEEL, CADMIUM OR ZINC FINISH, UNC-2A
MS35298 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON
STEEL, CADMIUM OF ZINC FINISH, UNF-2A
MS35299 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON
STEEL, PHOSPHATE FINISH, UNC-2A
MS35300 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), MEDIUM CARBON
STEEL, PHOSPHATE FINISH, UNF-2A
MS35301 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
PLAIN FINISH, UNC-2A
MS35302C NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXACON BOLT), ALLOY
STEEL, PLAIN FINISH, UNF-2A
MS35303 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
CADMIUM OF ZINC FINISH, UNC-2A
MS35304A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
CADMIUM OR ZINC FINISH, UNF-2A
MS35305 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
PHOSPHATE FINISH, UNC-2A
MS35306A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
PHOSPHATE FINISH, UNF-2A
MS35307E NOT 1 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
CORROSION RESISTING, PASSIVATED, UNC-2A (S/S BY NASM35307)
MS35308E(1) NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
CORROSION RESISTING, PASSIVATED, UNF-2A (S/S BY NASM35308)
MS35309C(1) NOT 3 SCREW, CAP, HEXAGON HEAD - NAVAL BRASS, PLAIN FINISH,
UNC-2A
MS35310B(1) NOT 2 SCREW, CAP, HEXAGON HEAD, NAVAL BRASS, PLAIN FINISH,
UNF-2A
MS35311A NOT 3 SCREW, CAP, HEXAGON HEAD, NICKEL-COPPER ALLOY, PLAIN FINISH
UNF-2A
MS35312A NOT 3 SCREW, CAP, HEXAGON HEAD, NICKEL-COPPER ALLOY, PLAIN FINISH,
UNF-2A
MS35313 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALUMINUM ALLOY,
ANODIZED FINISH, UNC-2A
MS35314 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALUMINUM ALLOY,
ANODIZED FINISH, UNF-2A
MS35354 BOLT, MACHINE, SQUARE HEAD, (UNFINISHED), STEEL, UNCOATED, UNC-2A
(S/S BY MS-35355A)
MS35357A SCREW, MACHINE, ROUND HEAD, SLOTTED
MS35358A SCREW, MACHINE, OVAL HEAD, SLOTTED
MS35359A SCREW, MACHINE, BINDING HEAD, SLOTTED
MS35360A SCREW, MACHINE-TRUSS HEAD, SLOTTED (S/S BY MS35206 IN PART, MS35207
IN PART, MS35215 IN PART, MS35218 IN PART, AND MS35219 IN PART)
MS35361A SCREW, MACHINE, FILLISTER HEAD, SLOTTED
MS35362A SCREW, MACHINE, ROUND HEAD, CROSS RECESSED
MS35363A SCREW, MACHINE, OVAL HEAD, CROSS RECESSED
MS35364A SCREW, MACHINE, BINDING HEAD, CROSS RECESSED
MS35365A SCREW, MACHINE, TRUSS HEAD, CROSS RECESSED
MS35366A SCREW, MACHINE, FILLISTER HEAD, CROSS RECESSED
MS35455B(1) SCREW, CAP, SOCKET HEAD-HEXAGON, ALLOY STEEL, UNCOATED, UNC-3A
MS35456B(1) NOT 1 SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, UNCOATED,
UNF-3A
MS35457B(1) SCREW, CAP, SOCKET HEAD HEXAGON, ALLOY STEEL, CADMIUM OR ZINC,
UNC-3A
MS35458B(1) SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, CADMIUM OR
ZINC, UNF-3A
MS35459B NOT 2 SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, PHOSPHATE,
UNC-3A
MS35460B NOT 2 SCREW, CAP, SOCKET HEAD - HEXAGON, ALLOY STEEL, PHOSPHATE,
UNF-3A
MS35461B(1) SCREW, CAP, SOCKET HEAD - HEXAGON, STEEL, CORROSION RESISTING,
PASSIVATED, UNC-3A
MS35492E NOT 3 SCREW, WOOD, FLAT HEAD, CROSS-RECESSED, STEEL AND BRASS
MS35493E NOT 3 SCREW, WOOD, ROUND HEAD, CROSS-RECESSED, STEEL AND BRASS
MS35494E NOT 3 SCREW, WOOD, FLAT HEAD, SLOTTED, STEEL AND BRASS
MS35495D NOT 3 SCREW, WOOD, ROUND HEAD, SLOTTED, STEEL AND BRASS
MS35646B NOT 1 SCREW, EYE, STEEL OR BRASS
MS35795 NOT 1 SCREW, WOOD, ( 14,2-INCH, ROUND HEAD HOT GALVANIZED (POLE-LINE)
(NO S/S DOCUMENT)
MS51017 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, CADMIUM OR ZINC,
NC-3A AND UNC-3A (USE MS 51963)
MS51018 SETSCREW, HEXAGON SOCKET, CUP POINT ALLOY STEEL, CADMIUM OR ZINC,
NF-3A AND UNC-3A (S/S BY MS-51964)
MS51019 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, PHOSPHATE COATED,
NC 3A AND UNC 3A (S/S BY MS 51963)
MS51020 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, PHOSPHATE COATED,
NF-3A AND UNF-3A (S/S BY MS-51964)
MS51021C NOT 1 SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION RESISTING
(CHROME-NICKEL) STEEL, PASSIVATED, UNC-3A PLAIN AND SELF LOCKING (S/S
BY NASM51021)
MS51022 SETSCREW, HEXAGON SOCKET, CUP POINT, CORROSION RESISTING (CHROMIUM)
STEEL, PASSIVATED, NC-3A AND UNC-3A (USE MS-51021)
MS51023C NOT 1 SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51023)
MS51024 SETSCREW, HEXAGON SOCKET, CUP POINT, CORROSION RESISTING (CHROMIUM)
STEEL, PASSIVATED, NF-3A AND UNF-3A (USE MS-51023)
MS51025 SETSCREW, HEAGON SOCKET, FLAT POINT, ALLOY STEEL, CADMIUM OR ZINC,
NC-3A AND UNF-3A (S/S BY MS-51965)
MS51026 SETSCREW, HEXAGON SOCKET, FLAT POINT, ALOY STEEL, CADIUM OR ZINC,
NF-3A AND UNF-3A (USE MS51966)
MS51027 SETSCREW, HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, PHOSPHATE COATED,
NC-3A AND UNC-3A (S/S BY MS-51965)
MS51028 SETSCREW, HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, PHOSPHATE COATED,
NF-3A AND UNF-3A (S/S BY MS-51966)
MS51029B NOT 1 SETSCREW-HEXAGON SOCKET, FLAT POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51029)
MS51030 SETSCREW, HEXAGON SOCKET, FLAT POINT, CORROSION RESISTING (CHROMIUM)
STEEL, PASSIVATED, NC-3A AND UNC-3A (USE MS-51029)
MS51031B NOT 1 SETSCREW-HEXAGON SOCKET, FLAT POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51031)
MS51032 SETSCREW-HEXAGON SOCKET, FLAT POINT, CORROSION RESISTING (CHROME-NICKEL)
STEEL, PASSIVATED, UNF-3A (USE MS 51031)
MS51033A NOT 2 SETSCREW-HEXAGON SOCKET, FLAT POINT, BRASS, BLACK OXIDE,
UNF-3A
MS51034 SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM OR
ZINC, NC-3A AND UNC-3A (S/S BY MS-51973
MS51035 SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADIUM OR ZINC,
NF-3A AND UNF-3A (S/S BY MS-51974)
MS51036 SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, PHOSPHATE COATED,
NC-3A AND UNC-3A (S/S BY MS-51973)
MS51037A SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, PHOSPHATE,
NF-3A AND UNF-3A (S/S BY MS-51974)
MS51038B NOT 1 SETSCREW-HEXAGON SOCKET, CONE POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNC-3A AND UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51038)
MS51039A SETSCREW, HEXAGON SOCKET, CONE POINT, CORROSION RESISTING (CHROMIUM)
STEEL, PASSIVATED, NF-3A (USE MS 51038A)
MS51040A NOT 2 SETSCREW-HEXAGON SOCKET, CONE POINT, BRASS, BLACK OXIDE,
UNF-3A
MS51041 SETSCREW, HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL CADMIUM
OR ZINC, NC-3A AND UNC-3A (S/S BY MS-51977)
MS51042 SETSCREW, HEXAGON SOCKET, HALF-DOG POIN, ALLOY STEEL, CADMIUM
OR ZINC, NF-3A AND UNF-3A (S/S BY MS-51976)
MS51043 SETSCREW, HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, PHOSPHATE
COATED, NC-3A AND UNC-3A (S/S BY MS-51977)
MS51044 SETSCREW, HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, PHOSPHATE
COATED, NF-3A AND UNF-3A (S/S BY MS 51976)
MS51045B NOT 1 SETSCREW-HEXAGON SOCKET, HALF-DOG POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNC-3A (S/S BY NASM51045)
MS51046 SETSCREW, HEXOGON SOCKET, HALF-DOG POINT, CORROSION RESISTING
(CHROMIUM) STEEL, PASSIVATED, NC-3A AND UNC-3A (USE MS 51045)
MS51047B NOT 2 SETSCREW-HEXAGON SOCKET, HALF-DOG POINT, CORROSION-RESISTING
STEEL, PASSIVATED, UNF-3A (S/S BY NASM51047)
MS51048 SETSCREW, HEXAGON SOCKET, HALF-DOG POINT, CORROSION RESISTING
(CHROMIUM) STEEL, PASSIVATED, NF-3A AND UNF-3A (S/S BY MS-51047)
MS51049 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, CADMIUM OR
ZINC, NC-3A AND UNC-3A (S/S BY MS-51981)
MS51050 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, CADMIUM OR
ZINC, NF-3A AND UNF-3A (S/S BY MS-51982)
MS51051 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, PHOSPHATE COATED,
NC-3A AND UNC-3A (S/S BY MS-51981)
MS51052 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, PHOSPHATE COATED,
NF-3 AND UNF-3A (S/S BY MS-51982)
MS51053A(1) SETSCREW, FLUTED SOCKET, ALLOY STEEL, CADMIUM PLATED, NC-3A
(SEE REV A FOR REPLACEMENT INFORMATION)
MS51054 SETSCREW, SQUARE HEAD, CUP POINT, CARBON STEEL, CADMIUM OR STEEL,
UNC-2A (S/S BY MS-51955)
MS51055 SETSCREW, SLOTTED, CUP POINT, CARBON STEEL, CADMIUM OR ZINC, NC-2A
(S/S BY MS-51963)
MS51056 SETSCREW, SLOTTED, FLAT POINT, CORROSION RESISTING (CHROME-NICKEL)
STEEL, PASSIVATED, NF-2A
MS51057 SETSCREW, SLOTTED, FLAT POINT, CORROSION RESISTING (CHRONIUM)
STEEL, PASSIVATED, NF-2A (USE MS 51031)
MS51058 SETSCREW, SLOTTED, FLAT POINT, BRASS, UNCOATED, NF-2A
MS51059 SETSCREW, SLOTTED, CONE POINT, CORROSION RESISTING (CHROME-NICKEL)
STEEL, PASSIVATED, NF-2A
MS51060 SETSCREW, SLOTTED, CONE POINT, CORROSION RESISTING (CHROMIUM)
STEEL, PASSIVATED, NF-2A
MS51061 SETSCREW, SLOTTED, CONE POINT, BRASS, UNCOATED, NF-2A
MS51093A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT, HEAD DRILLED
FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A )SUPERSEDED BY
MS-51095(
MS51094A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNF-2A (S/S BY MS-51096)
MS51095F NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD
DRILLED FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A, PLAIN
AND SELF-LOCKING (S/S BY NASM51095)
MS51096E NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD
DRILLED FOR LOCKING WIRE, STEEL, GRADE 5, CADMIUM PLATED, UNF-2A, PLAIN
AND SELF-LOCKING (S/S BY NASM51096)
MS51097A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE, ALLOY STEEL, GRADE 8, CADMIUM PLATED, UNC-2A (S/S BY
MS-18154)
MS51098A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE, ALLOY STEEL, GRADE 8, CADMIUM PLATED, UNF-2A (S/S BY
MS-18153)
MS51099B NOT 4 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD
DRILLED FOR LOCKING WIRE, STEEL, CORROSION-RESISTING, PASSIVATED, UNC-2A
MS51100B NOT 3 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD
DRILLED FOR LOCKING WIRE, STEEL, CORROSION-RESISTING, PASSIVATED, UNF-2A
MS51101 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE, ALUMINUM ALLOY, ANODIZED, UNC-2A
MS51102 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE, ALUMINUM ALLOY, ANODIZED, UNF-2A
MS51103A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED
FOR COTTER PIN, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A (S/S BY MS-51105)
MS51104A SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED
FOR COTTER PIN, STEEL, GRADE 5, CADMIUM PLATED, UNF-2A (SUPERSEDEDED BY
MS-51106)
MS51105D NOT 3 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, STEEL, GRADE 5, CADMIUM PLATED, UNC-2A (S/S BY
NASM51105)
MS51106C NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, STEEL, GRADE 5, CADMIUM PLATED, UNF-2A (S/S BY
NASM51106)
MS51107B NOT 4 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, ALLOY STEEL, GRADE 8, PHOSPHATE COATED, UNC-2A
MS51108B NOT 4 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, ALLOY STEEL, GRADE 8, PHOSPHATE COATED, UNF-2A
MS51109B NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
(S/S BY NASM51109)
MS51110B NOT 3 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK
DRILLED FOR COTTER PIN, STEEL, CORROSION-RESISTING, PASSIVATED, UNF-2A
(S/S BY NASM51110)
MS51111 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED
FOR COTTER PIN, ALUMINUM ALLOY, ANODIZED, UNC-2A
MS51112 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), SHANK DRILLED
FOR COTTER PIN, ALUMINUM ALLOY, ANODIZED, UNF-2A
MS51475A NOT 1 SCREW, MACHINE, BOOM SUPPORT ASSEMBLY
MS51476 NOT 3 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, UNC-3A
MS51477 NOT 2 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, UNF-3A
MS51478 NOT 2 SCREW, CAP, HEXAGON (FINISHED HEXAGON BOLT), HEAD DRILLED
FOR LOCKING WIRE ALLOY STEEL, GRADE 8, UNF-2A
MS51479 NOT 2 SCREW, MACHINE, 82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED,
CARBON STEEL, UNF-2A
MS51480 NOT 3 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A
MS51481 NOT 2 SCREW, MACHINE, 82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED,
CARBON STEEL, UNC-2A
MS51482 NOT 2 SETSCREW, HEXAGON SOCKET, CONE POINT, ALLOY STEEL, UNC-3A
MS51483 NOT 2 SCREW, MACHINE, DRILLED FILLISTER HEAD, SLOTTED, CARBON
STEEL, UNC-2A
MS51484 NOT 3 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A
MS51485 NOT 2 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD,
CROSS-RECESSED, CARBON STEEL
MS51486 NOT 1 SCREW, TAPPING, THREAD FORMING, TYPE AB, PAN HEAD, CROSS-RECESSED
MS51487 NOT 2 SETSCREW, SQUARE HEAD, CUP POINT, CARBON STEEL, UNC-2A
MS51488 NOT 3 SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
GRADE 8
MS51489 NOT 2 SETSCREW, HEXAGON SOCKET, OVAL POINT, ALLOY STEEL
MS51490 NOT 2 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
GRADE 5, UNF-2A
MS51491 NOT 3 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
GRADE 5 UNC-2A
MS51492(1) NOT 1 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL,
UNC-2A
MS51493(1) NOT 1 SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL
UNF-2A
MS51494 NOT 2 SCREW, EXTERNALLY RELIEVED BODY, FLAT COUNTERSUNK HEAD,
100 DEGREE, CROSS-RECESSED
MS51575A NOT 1 SCREW, SHOULDER, SLOTTED-HEAD, CORRISION-RESISTANT STEEL
(S/S BY NASM51575)
MS51576A NOT 1 SCREW, SHOULDER, SOCKET-HEAD, HEXAGON, CORROSION-RESISTANT
STEEL (S/S BY NASM51576)
MS51850 NOT 3 SCREW, TAPPING - THREAD FORMING, TYPE AB, HEXAGON HEAD,
SLOTTED (S/S BY NASM51850)
MS51851 NOT 3 SCREW, TAPPING-THREAD CUTTING, TYPE D, HEXAGON HEAD, SLOTTED
(S/S BY NASM51851)
MS51861A NOT 3 SCREW, TAPPING-THREAD FORMING, TYPE AB, PAN HEAD, CROSS-RECESSED
(S/S BY NASM51861)
MS51862A NOT 3 SCREW, TAPPING - THREAD FORMING, TYPE AB, FLAT 82 DEGREE
COUNTERSUNK HEAD, CROSS-RECESSED (S/S BY NASM51862)
MS51863 NOT 2 SCREW, TAPPING HIGH PERFORMANCE, THREAD ROLLING, TYPES SF,
SW AND TT, PAN HEAD, CROSS RECESSED (S/S BY NASM51863)
MS51869 NOT 2 SCREW, TAPPING HIGH PERFORMANCE, THREAD ROLLING, TYPES SF,
SW AND TT, HEXAGON WASHER HEAD
MS51870 NOT 2 SCREW, TAPPING-HIGH PERFORMANCE, THREAD ROLLING, TYPES SF,
SW AND TT, FLAT COUNTERSUNK HEAD, CROSS- RECESSED (S/S BY NASM51870)
MS51896A(1) NOT 1 SCREW, EXTERNALLY RELIEVED BODY, PANHEAD, CROSS-RECESSED,
CORROSION-RESISTING STEEL, UNC-2A (S/S BY NASM51896)
MS51955A NOT 3 SETSCREW-SQUARE HEAD, CUP POINT, CARBON STEEL
MS51958C(1) NOT 1 SCREW, MACHINE PAN-HEAD, CROSS-RECESSED, CORROSION RESISTING
STEEL, UNF-2A (S/S BY NASM51958)
MS51959D NOT 1 SCREW, MACHINE-FLAT COUNTERSUNK HEAD, 82 DEG., CROSS-RECESSED,
CORROSION - RESISTANT STEEL, UNC-2A (S/S BY NASM51959)
MS51963C NOT 1 SETSCREW-HEXAGON SOCKET, CUP POINT, ALLOY STEEL, CADMIUM
PLATED, UNC-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51963)
MS51964E NOT 2 SETSCREW, HEXAGON SOCKET, CUP POINT, ALLOY STEEL, CADMIUM
PLATED, UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51964)
MS51965B NOT 1 SETSCREW-HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, CADMIUM
PLATED, UNC-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51965)
MS51966A NOT 2 SETSCREW - HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, CADMIUM
PLATED, UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51955)
MS51973B NOT 1 SETSCREW - HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM
PLATED, UNC-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51973)
MS51974B NOT 2 SETSCREW-HEXAGON SOCKET, CONE POINT, ALLOY STEEL, CADMIUM
PLATED, UNF-3A, PLAIN AND SELF-LOCKING (S/S BY NASM51974)
MS51975E NOT 1 SCREW, SHOULDER - SOCKET HEAD, HEXAGON, ALLOY STEEL, CADMIUM
PLATED, UNC-3A (S/S BY NASM51975)
MS51976A NOT 2 SETSCREW-HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, CADMIUM
PLATED, UNF-3A (S/S BY NASM51976)
MS51977C NOT 1 SETSCREW-HEXAGON SOCKET, HALF-DOG POINT, ALLOY STEEL, CADMIUM
PLATED, UNC-3A (S/S BY NASM51977)
MS51981C NOT 1 SETSCREW-HEXAGON SOCKET, OVAL POINT, ALLOY STEEL, CADMIUM
PLATED, UNC-3A (S/S BY NASM51981)
MS51982A NOT 1 SETSCREW-HEXAGON SOCKET, OVAL POINT, ALLOY, CADMIUM PLATED,
UNC-3A (S/S BY NASM51982)
MS9001 CROSS-RECESS, BLUNT BOTTOM STANDARD FOR COUNTERSUNK 82 DEGREES
HEAD MACHINE SCREWS.
MS9002 CROSS-RECESS, BLUNT BOTTOM STANDARD FOR COUNTERSUNK 100 DEGREES
HEAD MACHINE SCREWS.
MS9003 CROSS-RECESS, BLUNT BOTTOM STANDARD FOR PAN HEAD MACHINE SCREWS.
MS9005 CROSS-RECESS, BLUNT BOTTOM STANDARD FOR ROUND HEAD WOOD SCREWS.
MS9006C NOT 2 RECESSES-CROSS, LOW TORQUE DRIVE, DIMENSIONS AND GAGE DIMENSIONS
FOR (S/S BY NASM9006)
MS9033B(1) NOT 1 BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT, .190 (NO.
10)-32, AMS 5735
MS9034B BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT, .250-28, AMS 5735
(ASG)
MS9035C(1) BOLT-MACHINE, 12 POINT HEAD, HEAT RESISTANT STEEL, .3125-24
NS
MS9036B NOT 2 BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL, .375-24
NS
MS9037C NOT 1 BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL .4375-20
NS (NO S/S DOCUMENT)
MS9038C NOT 1 BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL, .500-20
NS (NO S/S DOCUMENT)
MS9039C NOT 1 BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL, .5625-18
NS (NO S/S DOCUMENT)
MS90725D(2) NOT 1 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
GRADE 5, CADMIUM PLATED, UNC-2A (S/S BY NASM90725)
MS90726B(2) NOT 1 SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL,
GRADE 5, CADMIUM PLATED, UNF-2A (S/S BY NASM90726)
MS90727F SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL,
GRADE 8, ZINC COATED UNF-2A, PLAIN AND SELF-LOCKING (S/S BY ANSI-B18.2.1)
MS90728G SCREW, CAP, HEXAGON HEAD (FINISH HEXAGON BOLT), ALLOY STEEL,
GRADE 8, ZINC COATED PLAIN AND SELF-LOCKING, UNC-2A (S/S BY ANSI-B18.2.1)
MS9122A NOT 3 SCREW, MACHINE, SLOTTED HEX HEAD, .190-32
MS9123A(1) NOT 1 SCREW, MACHINE, SLOTTED HEX HEAD, 250-28
MS9177B NOT 1 SCREW, MACHINE-CRES DOUBLE HEXAGON, EXTENDED WASHER HEAD,
.138-40
MS9178B NOT 1 SCREW, MACHINE-CRES, DOUBLE HEXAGON EXTENDED WASHER HEAD,
164-36
MS9183B NOT 1 SCREW, MACHINE, STEEL, DRILLED 12 POINT HEAD, .138 (NO.
6)-40, CADMIUM PLATE (ASG) (NO S/S DOCUMENT)
MS9185C NOT 1 SCREW, MACHINE, STEEL, 12 POINT HEAD, .138 (NO. 6)-40, CADMIUM
PLATE (NO S/S DOCUMENT)
MS9187C NOT 1 SCREW, MACHINE-CRES, DOUBLE HEXAGON EXTENDED WASHER HEAD,
DRILLED, .138-40 (NO S/S DOCUMENT)
MS9188B NOT 1 SCREW, MACHINE-CRES, DOUBLE HEXAGON EXTENDED WASHER HEAD,
DRILLED, .164-36 (NO S/S DOCUMENT)
MS9189C NOT 1 SCREW-MACHINE, STEEL, 12 POINT HEAD, .138 (NO. 6)-40, BLACK
OXIDE (NO S/S DOCUMENT)
MS9206A NOT 3 SCREW, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE
HEXAGON EXTENDED WASHER HEAD, .138-40 UNJF-3A
MS9207A NOT 4 SCREW, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE
HEXAGON EXTENDED WASHER HEAD, .164-36 UNJF-3A (S/S BY SAE-AS9207)
MS9215A NOT 3 SCREW, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE
HEXAGON EXTENDED WASHER HEAD, DRILLED, .138 40 UNJF 3A
MS9216 NOT 1 SCREW, MACHINE&STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .164-36 UNJF-3A (S/S
BY SAE-AS9216)
MS9224A BOLT- MACHINE, 12 POINT HEAD, HEAT RESISTANT, .5625-18 AMS 5735
(ASG)
MS9281B SCREW, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .138-40
UNJF-3A
MS9282A NOT 1 SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.164-36 UNJF-3A
MS9292 NOT 1 SCREW, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .138-40 UNJF-3A (S/S BY SAE-AS9292)
MS9293A NOT 1 SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .164-36 UNJF-3A
MS9316 NOT 1 SCREW, MACHINE - STEEL, SLOTTED HEXAGON HEAD, .190-32, NI-CAD
PLATE (S/S BY SAE-AS9316)
MS9317A NOT 1 SCREW, MACHINE-STEEL, SLOTTED HEXAGON HEAD, .250-28 NI-CAD
PLATE (S/S BY SAE-AS9317)
MS9438B SCREW, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
HEXAGON HEAD, DRILLED, .138-40 UNJF-3A
MS9439A(1) NOT 1 SCREW, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .164-36 UNJF-3A
MS9449A NOT 1 SCREW MACHINE HEXAGON HEAD STEEL 138-40 UNJF-3A (S/S BY
SAE-AS9449)
MS9450A NOT 1 SCREW MACHINE HEXAGON HEAD STEEL 164-36 UNJF-3A (S/S BY
SAE-AS9450)
MS9487A(1) NOT 2 SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731,
136-40 UNJF-3A
MS9488A(1) NOT 2 SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731,
.164-36 UNJF-3A
MS9498A SCREW, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLD, FULL SHANK, AMS
5731, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9499C SCREW, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5731, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9516C NOT 1 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD,
.138-40 UNJF-3A (S/S BY SAE-AS9516)
MS9517C NOT 2 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD,
.164-36 UNJF-3A (S/S BY SAE-AS9517)
MS9527B NOT 1 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1
HOLE, HEXAGON HEAD, .138-40 UNJF-3A (S/S BY SAE-AS9527)
MS9528 NOT 1 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1
HOLE, HEXAGON HEAD, .164-36 UNJF-3A (S/S BY SAE-AS9528)
MS9554D(1) NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .138-40 UNJF-3A (S/S BY SAE-AS9554)
MS9555C NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .164-36 UNJF-3A (S/S BY SAE-AS9555)
MS9563A SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS 5731, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9564A NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5731, .164-36 UNJF-3A (S/S BY SAE-AS9564)
MS9572D NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .138-40 UNJF-3A (S/S BY SAE-AS9572)
MS9573B NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .164-36 UNJF-3A (S/S BY SAE-AS9573)
MS9622 SCREW MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9623 SCREW, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .164-36 UNJF-3A (NO S/S DOCUMENT)
MS9631B NOT 1 SCREW, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967,
.138-40 UNJF-3A (S/S BY SAE-AS9631)
MS9632B NOT 1 SCREW, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967,
0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9640B NOT 1 SCREW, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
TITANIUM AMS 4967, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9641B SCREW, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM
AMS 4967, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9649B SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9650B NOT 1 SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, TITANIUM AMS
4967, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9694A NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9695A NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .164-36 UNJF-3A (NO S/S DOCUMENT)
MS9703A NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9704A(1) NOT 2 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD,
DRILLED, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A
MS9712A NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL,.138-40 UNJF-3A (S/S
BY SAE-AS9712)
MS9713A NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A (NO
S/S DOCUMENT)
MS9730 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD
SHANK, CRES AMS 5643, .138-40 UNJF-3A (NO S/S DOCUMENT)
MS9731 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9739 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9740 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9748 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9749 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9757 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, TITANIUM AMS 4967, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9758 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, TITANIUM AMS 4967, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9781B NOT 1 SCREW, MACHINE-HEXAGON HEAD, FULL SHANK, AMS 5643, 0.138-40
UNJF-3A (NO S/S DOCUMENT)
MS9782B NOT 1 SCREW, MACHINE-HEXAGON HEAD, FULL SHANK, AMS 5643, 0.164-38
UNJF-3A (NO S/S DOCUMENT)
MS9792B NOT 1 SCREW, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9793B NOT 1 SCREW, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9803B SCREW, MACHINE-HEXAGON HEAD, PD SHANK, AMS 5643, 0.138-40 UNJF-3A
(NO S/S DOCUMENT)
MS9804B SCREW, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, 0.164-36 UNJF-3A
(NO S/S DOCUMENT)
MS9814B NOT 1 SCREW, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9815B NOT 1 SCREW, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9883 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9884 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9892 NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .138-4 UNJF-3A (NO S/S DOCUMENT)
MS9893 NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .164-36 UNJF-3A (NO S/S DOCUMENT)
MS9912 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD
SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9913 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD
SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9921 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9922 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9930 NOT 1 SCREW, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.138-40 UNJF-3A (NO S/S DOCUMENT)
MS9931 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK,
STEEL AMS 6322, CADMIUM PLATED, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
MS9939 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.138-40 UNJF-2A (NO S/S DOCUMENT)
MS9940 NOT 1 SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, 0.164-36 UNJF-3A (NO S/S DOCUMENT)
NAS1096 SCREW - HEX HEAD, RECESSED, FULL THREAD (NO S/S DOCUMENT)
NAS1402THRUNAS1406 SCREW, MACHINE, AIRCRAFT, PAN HEAD, PHILLIPS RECESS,
160,000 PSI TENSILE (NO S/S DOCUMENT)
NAS560 SCREW, MACHINE, NON-MAGNETIC HIGH TEMPERATURE, STRUCTURAL, 100
DEG. FLUSH HEAD (NO S/S DOCUMENT)
NASM51474 SCREW, CAP, HEX HEAD, FULLY THREADED -METRIC (NO S/S DOCUMENT)
A-A-53421 螺丝钉，仪器，眼镜框7月或5月每桶铰链 SCREW, INSTRUMENT, SPECTACLE FRAME 7 OR
5 BARREL HINGE
A-A-53589 NOT 1 螺丝钉，仪器，眼镜框， 3桶 SCREW, INSTRUMENT, SPECTACLE FRAME, 3-BARREL
A-A-55623 NOT 1 螺杆，机， 82度和100度，单位countersunk头部，缝，塑料（尼龙） ，联合国军司令部- 2A型和联合国基金会-
2A火箭 SCREW, MACHINE, 82 DEGREE AND 100 DEGREE, FLAT COUNTERSUNK HEAD,
SLOTTED, PLASTIC (NYLON), UNC-2A AND UNF-2A
A-A-55624 NOT 1 螺杆，机，盘头，开槽，塑料（尼龙） ，联合国军司令部- 2A火箭 SCREW, MACHINE, PAN HEAD,
SLOTTED, PLASTIC (NYLON), UNC-2A
AN510 REV 6(2) 螺杆，机，平头， 82度，优良的线程 SCREW, MACHINE, FLAT HEAD, 82 DEGREE,
FINE THREAD
ASME-B18.2.3.9M 螺丝，六角法兰沉重的度量 SCREWS, HEX FLANGE HEAVY METRIC
ASME-B18.2.4M 六角法兰螺丝公制 SCREWS HEX FLANGE METRIC
ASME-B18.3 螺丝一套（英寸系列）插座盖，肩部及 SCREWS SET (INCH SERIES) SOCKET CAP, SHOULDER
AND
ASME-B18.3.1M 螺丝钉，鸭舌帽，插座头公制系列 SCREW, CAP, SOCKET HEAD- METRIC SERIES
ASME-B18.3.3M 螺丝钉，肩，六边形插座头公制系列 SCREW, SHOULDER, HEXAGON SOCKET HEAD- METRIC
SERIES
ASME-B18.3.5M 螺钉，六角插座单位countersunk头帽（公制系列） SCREW, HEXAGON SOCKET FLAT
COUNTERSUNK HEAD CAP (METRIC SERIES)
ASME-B18.3.6M 定螺丝，公制系列插座 SET SCREWS, METRIC SERIES SOCKET
ASME-B18.6.2 螺丝钉，缝头帽，广场设置螺丝，开槽无头螺丝一套 SCREW, SLOTTED HEAD CAP, SQUARE SET
SCREW & SLOTTED HEADLESS SET SCREWS
ASME-B18.6.5M 螺丝钉，攻丝，螺纹成形及螺纹切削-度量 SCREWS, TAPPING, THREAD FORMING &
THREAD CUTTING-METRIC
ASME-B18.6.7M 螺丝，机械公制 SCREWS, MACHINE-METRIC
ASTM-A574 螺丝，帽子，合金钢，插座头 SCREWS, CAP, ALLOY STEEL,SOCKET-HEAD
ASTM-A574M 合金钢插座-头螺栓（公制） ALLOY STEEL SOCKET-HEAD CAP SCREWS (METRIC)
ASTM-C1002 钢自冲攻螺钉为应用石膏面板的产品或金属石膏基地，以木材钉或stel钉 STEEL SELF-PIERCING TAPPING
SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES
TO WOOD STUDS OR STEL STUDS
ASTM-C954 钢钻头螺钉的应用石膏板或金属石膏基地，以钢钉从0.033在。 （ 0.84毫米）到0.112在。 （ 2.84毫米） ，厚度
STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM BOARD OR METAL PLASTER
BASES TO STEEL STUDS FROM 0.033 IN. (0.84 MM) TO 0.112 IN. (2.84 MM) IN
THICKNESS
ASTM-F593 螺栓，不锈钢，六角螺栓，并钉 BOLTS, STAINLESS STEEL, HEX CAP SCREWS, AND STUDS
ASTM-F835 合金钢插座按钮和单位countersunk头螺栓 ALLOY STEEL SOCKET BUTTON AND FLAT
COUNTERSUNK HEAD CAP SCREWS
ASTM-F835M 螺丝，帽子，插座按钮和单位countersunk头，合金钢（公制） SCREWS, CAP, SOCKET BUTTON
AND FLAT COUNTERSUNK HEAD, ALLOY STEEL (METRIC)
ASTM-F837 螺丝，帽子，插座头，不锈钢 SCREWS, CAP, SOCKET HEAD, STAINLESS STEEL
ASTM-F879 螺丝，帽子，插座按钮和单位countersunk头，不锈钢 SCREWS, CAP, SOCKET BUTTON AND
FLAT COUNTERSUNK HEAD, STAINLESS STEEL
ASTM-F880 螺丝，插座设置，不锈钢 SCREWS, SOCKET-SET, STAINLESS STEEL
ASTM-F880M 螺丝，插座设置，不锈钢（公制） SCREWS, SOCKET-SET, STAINLESS STEEL (METRIC)
ASTM-F912 合金钢套筒组螺丝 ALLOY STEEL SOCKET SET SCREWS
ASTM-F912M 合金钢套筒组螺丝（公制） ALLOY STEEL SOCKET SET SCREWS (METRIC)
FF-S-200B(1) setscrews ：六边形插座及样条插座，头 SETSCREWS: HEXAGON SOCKET AND SPLINE
SOCKET, HEADLESS
FF-S-85D 螺丝钉，鸭舌帽，开槽和六角头 SCREW, CAP, SLOTTED AND HEXAGON HEAD
FF-S-86E(4) NOT 2 螺丝钉，鸭舌帽，插座头 SCREW, CAP, SOCKET-HEAD
FF-S-88B(1) 螺丝钉，眼 SCREW, EYE
FF-S-92B(1) 螺杆，机，开槽，两岸休会或六角头 SCREW, MACHINE, SLOTTED, CROSS RECESSED OR
HEXAGON HEAD
FF-T-305C NOT 2 thumbscrew THUMBSCREW
AISC-S329 DESIGN, STRESS, ALLOWABLE STRUCTURAL JOINTS USING ASTM-A325
OR ASTM-A490 BOLTS (NO S/S DOCUMENT)
AN101001THRUAN101100 REV 3 NOT 2 BOLT - HEX HEAD, .190-32
AN101101THRUAN101200 REV 3 NOT 2 BOLT - HEX HEAD .250-28
AN101201THRUAN101300 REV 3 NOT 2 BOLT - HEX HEAD .3125-24
AN101301THRUAN101400 REV 3 NOT 2 BOLT - HEX HEAD .375-24
AN101401THRUAN101500 REV 3 NOT 2 BOLT - HEX HEAD .4375-20
AN101501THRUAN101600 REV 3 NOT 2 BOLT - HEX HEAD .500-20
AN101601THRUAN101700 REV 3 NOT 2 BOLT - HEX HEAD .5625-18
AN101701THRUAN101800 REV 3 NOT 2 BOLT - HEX HEAD .625-18
AN101801THRUAN101900 REV 3 BOLT - HEX HEAD .750-16 (NO S/S DOCUMENT)
AN101901THRUAN102000 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .190-32
AN102001THRUAN102100 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .250-28
AN102101THRUAN102200 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .3125-24
AN102201THRUAN102300 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .375-24
AN102301THRUAN102400 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .4375-20
AN102401THRUAN102500 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .500-20
AN102501THRUAN102600 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .5625-18
AN102601THRUAN102700 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .625-18
AN102701THRUAN102800 REV 3 NOT 2 BOLT - HEX HEAD, DRILLED SHANK, .750-16
AN102801THRUAN102900 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
AN102901THRUAN103000 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
AN103001THRUAN103100 REV 5 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
AN103101THRUAN103200 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
AN103201THRUAN103300 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
AN103301THRUAN103400 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
AN103401THRUAN103500 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
AN103501THRUAN103600 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
AN103601THRUAN103700 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
AN103701THRUAN103800 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
AN103801THRUAN103900 REV 2 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
AN103901THRUAN104000 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
AN104001THRUAN104100 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
AN104101THRUAN104200 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
AN104201THRUAN104300 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
AN104301THRUAN104400 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
AN104401THRUAN104500 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
AN104501THRUAN104600 REV 3 NOT 2 BOLT - DRILLED HEX HEAD, 6 HOLES, .750-16
AN104601THRUAN104700 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, .190-32
AN104701THRUAN104800 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, .250-28
AN104801THRUAN104900 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .3125-24
AN104901THRUAN105000 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .375-24
AN105001THRUAN105100 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .4375-20
AN105101THRUAN105200 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .5000-20
AN105201THRUAN105300 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .5625-18
AN105301THRUAN105400 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .625-18
AN105401THRUAN105500 REV 3(1) NOT 1 BOLT - CRES HEX HEAD .750-15
AN105501THRUAN105600 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.190-32
AN105601THRUAN105700 REV 3(1) NOT 1 BOLT, CRES HEX HEAD, DRILLED SHANK,
.250-28
AN105701THRUAN105800 REV 4(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.3125-24
AN105801THRUAN105900 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.375-24
AN105901THRUAN106000 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.4375-20
AN106001THRUAN106100 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.500-20
AN106101THRUAN106200 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.5625-18
AN106201THRUAN106300 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.625-18
AN106301THRUAN106400 REV 3(1) NOT 1 BOLT - CRES HEX HEAD, DRILLED SHANK,
.750-16
AN106401THRUAN106500 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.190-32
AN106501THRUAN106600 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.250-28
AN106601THRUAN106700 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.3125-24
AN106701THRUAN106800 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.375-24
AN106801THRUAN106900 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.4375-20
AN106901THRUAN107000 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.500-20
AN107001THRUAN107100 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.5625-18
AN107101THRUAN107200 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.625-18
AN107201THRUAN107300 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 1 HOLE,
.750-16
AN107301THRUAN107400 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.190-32
AN107401THRUAN107500 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.250-28
AN107501THRUAN107600 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.3125-24
AN107601THRUAN107700 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.375-24
AN107701THRUAN107800 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.4375-20
AN107801THRUAN107900 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.500-20
AN107901THRUAN108000 REV 3(1) BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
AN108001THRUAN108100 REV 3(1) NOT 1 BOLT-CRES DRILLED HEX HEAD, 6 HOLES,
.625-18
AN108101THRUAN108200 REV 3(1) NOT 1 BOLT - CRES DRILLED HEX HEAD, 6 HOLES,
.750-16
AN148551THRUAN148650 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6-HOLE DRILLED,
.190-32
AN148651THRUAN148750 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6 HOLES DRILLED,
.250-28
AN148751THRUAN148850 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6 HOLES DRILLED,
.3125-24
AN148851THRUAN148950 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6 HOLES DRILLED,
375-24
AN148951THRUAN149050 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6 HOLES DRILLED,
.4375-20
AN149051THRUAN149150 REV 3(1) NOT 1 BOLT - SOCKET HEAD, 6 HOLES DRILLED,
.500-20
AN149151THRUAN149250 REV 2 NOT 2 BOLT-SOCKET HEAD, 6 HOLES DRILLED, .5625-18
AN149251THRUAN149350 REV 2(1) NOT 2 BOLT-SOCKET HEAD, 6 HOLES DRILLED,
.625-18
AN173THRUAN186 REV 7(1) BOLT-MACHINE, CLOSE TOLERANCE, AIRCRAFT
AN21THRUAN37 REV 11 NOT 1 BOLT - CLEVIS (S/S BY NASM21THRU37)
AN3THRUAN20 REV 12 NOT 1 BOLT - MACHINE, AIRCRAFT (S/S BY NASM3THRU20)
AN42THRUAN49 REV 6 NOT 1 BOLT, EYE (S/S BY NASM42THRU49)
AN501 REV 6 NOT 1 SCREW, MACHINE, FILLISTER HEAD, FINE THREAD (S/S BY
NASM501)
AN555 REV 5 BOLT - SHOULDER, ANCHOR LIGHT MOUNTING (NO S/S DOCUMENT)
AN60 BOLT-HEXAGON HEAD, FINE THREAD (SEE MS90726)
AN65 REV 8 BOLT - HEXAGON HEAD, COARSE THREAD
AN70 REV 7 BOLT - CARRIAGE, WITH NUT
AN73THRUAN81 REV 6 BOLT, MACHINE, AIRCRAFT, DRILLED HEAD (S/S BY MS20073
AND MS20074)
ANSI-B18.2.3.5M BOLT, HEX - METRIC - W/ERRATA (NO S/S DOCUMENT)
ANSI-B18.2.3.7M BOLT, STRUCTURAL, HEAVY HEX - METRIC (NO S/S DOCUMENT)
ANSI-B18.2.3.8M SCREW, LAG, HEX HEAD - METRIC (NO S/S DOCUMENT)
ANSI-B18.5.2.1M BOLT, ROUND HEAD, SHORT SQUARE NECK - METRIC (NO S/S DOCUMENT)
ANSI-B18.9 BOLTS, PLOW (NO S/S DOCUMENT)
ASTM-A325M BOLTS, STRUCTURAL, STEEL, HEAT TREATED 830 MPA MINIMUM TENSILE
STRENGTH (METRIC) (NO S/S DOCUMENT)
ASTM-A490M BOLTS, STEEL, HIGH-STRENGTH, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL
STEEL JOINTS (METRIC)1 (NO S/S DOCUMENT)
DOD-B-63475 NOT 2 BOLT, SHOULDER, HEXAGON HEAD, GENERAL SPECIFICATION
FOR, METRIC
DOD-B-63475/1 NOT 3 BOLT, SHOULDER, HEXAGON HEAD, LONG THREAD, METRIC
DOD-B-63475/2 NOT 3 BOLT, SHOULDER, HEXAGON HEAD, SHORT THREAD, METRIC
DOD-B-63545 NOT 2 BOLT, RIBBED SHOULDER, WHEEL MOUNTING, METRIC GENERAL
SPECIFICATION FOR
DOD-B-63545/1 NOT 2 BOLT, RIBBED SHOULDER, WHEEL MOUNTING, METRIC
DOD-B-63545/2 NOT 2 BOLT, RIBBED SHOULDER, EXTENDED SHOULDER, WHEEL MOUNTING,
METRIC
DOD-B-70331 NOT 1 BOLT, SELF LOCKING, HEXAGON HEAD, STEEL, METRIC, GENERAL
SPECIFICATION FOR
DOD-B-70331/1 NOT 2 BOLT, SELF LOCKING, HEXIGON HEAD, STEEL, SAE J1199
(10.9) TYPE B, METRIC
DOD-B-70331/2 NOT 2 BOLT, SELF LOCKING, HEXAGON HEAD, STEEL, SAE J1199
(10.9) TYPE BH, M
DS51417 NOT 1 BOLT, MACHINE, HEX HEAD FULLY THREADED, FINE THREAD, METRIC
(S/S BY NASM51417)
FF-B-186 BEARINGS, ROLLER (S/S BY FF-B-185 IN PART)
FF-B-561D BOLTS, (SCREW), LAG (S/S BY ASME-B18.2.1 AND ASME-B18.18.1M)
FF-B-575C NOT 1 BOLT, HEXAGON AND SQUARE
FF-B-584F NOT 1 BOLTS, SQUARE NECK AND TEE HEAD (S/S BY ASME-B18.5, ASME-B18.9,
AND ASME-B18.18.1M)
FF-B-588E NOT 1 BOLT, TOGGLE: AND EXPANSION SLEEVE, SCREW (NO S/S DOCUMENT)
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
