〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
MIL-B-18695A
BOLTS AND NUTS, PLOW, POLE LINE, HOOK, AND SHOULDER (S/S BY MIL-H-55053A)
MIL-B-23964D(5) NOT 1 BOLT, SELF-RETAINING, POSITIVE LOCKING (S/S BY NASM23964)
MIL-B-2938 BOLTS AND NUTS, DECK
MIL-B-30504A BOLT-U, SUSPENSION, AIRDROP
MIL-B-3964B NOT 1 BOLTS AND NUTS, TRACK (S/S BY ANSI B18.10)
MIL-B-45908B NOT 1 BOLT, EYE, GENERAL SPECIFICATION FOR (S/S BY NASM45908)
MIL-B-52796A NOT 1 BOLTS, RIBBED NECK, STRUCTURAL TYPE, WITH RECESSED
LOCKNUT (NO S/S DOCUMENT)
MIL-B-6461 BOLTS, AIRCRAFT ENGINE AND PROPELLER
MIL-B-6812E NOT 1 BOLTS, AIRCRAFT (S/S BY NASM6812)
MIL-B-70332/2 NOT 1 BOLT, SHOULDERED (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
MIL-B-7838C(1) NOT 1 BOLT, INTERNAL WRENCHING, 160 KSI FTU (S/S BY NASM7838)
MIL-B-7874B(1) SUP 1 NOT 1 BOLT, MACHINE, 1200 DEG. F (S/S BY NASM7874)
MIL-B-83050D(2) NOT 1 BOLT, SELF-RETAINING, IMPEDANCE TYPE (S/S BY NASM83050)
MIL-B-85604A(1) NOT 1 BOLT, NICKEL ALLOY 718, TENSION, HIGH STRENGTH,
(125 KSI FSU & 220 KSI FTU) HIGH TEMPERATURE, SPLINE DRIVE, GENERAL
SPECIFICATION FOR (S/S BY NASM85604)
MIL-B-85667/10 NOT 1 BOLT, SLEEVE, 100 DEG. TENSION FLUSH HEAD, STRAIGHT
SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 160 KSI FTU, 450 DEG. F
MIL-B-85667/11 NOT 1 BOLT, SLEEVE, 100 DEG. TENSION FLUSH HEAD, STRAIGHT
SHANK, NICKEL-CRES 304 SLEEVE, NICKEL-ALLOY 718 PIN, 220 KSI FTU, 450
DEG. F
MIL-B-85667/13 NOT 1 BOLT, 100 DEG. TENSION FLUSH HEAD, STRAIGHT SHANK,
ALUMINUM ALLOY SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU
MIL-B-85667/1A NOT 2 BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH
HEAD, RELIABILITY AND MAINTAINABILITY REQUIREMENTS FOR
MIL-B-85667/2A NOT 1 BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT
SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 125 KSI FSU
MIL-B-85667/4A NOT 1 BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT
SHANK, TITANIUM ALLOY PIN, 95 KSI FSU
MIL-B-85667/6A NOT 1 BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT
SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 450 DEG. F
MIL-B-85667/8 NOT 1 BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT
SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 450 DEG. F
MIL-B-85667/9 NOT 1 BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES
304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 160 KSI FTU, 450 DEG. F
MIL-B-857A(5) NOT 1 BOLT, NUTS, AND STUDS (S/S BY MIL-DTL-1222)
MIL-B-87114/1B NOT 2 BOLTS, 100 DEG. HEAD, RIBBED-TORQ-SET RECESS, CLOSE
TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT)
MIL-B-87114/2B NOT 2 BOLTS, 100 DEG. REDUCED DOME HEAD, RIBBED-TORQ-SET
RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S
DOCUMENT)
MIL-B-87114/3B NOT 2 BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE,
ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT)
MIL-B-87114/4 NOT 2 BOLT, HEX HEAD, CROSS RECESS, FULL THREAD, A-286 CRES,
160 KSI FTU (S/S BY NAS1802)
MIL-B-87114A(1) SUP 1 NOT 2 BOLTS, RECESS DRIVE, GENERAL SPECIFICATION
FOR (S/S BY NAS4002 AND NAS4003)
MIL-B-8831/1 NOT 1 BOLT, STRAIGHT SHANK, EXPANDABLE ALUMINUM ALLOY SLEEVE,
ALLOY STEEL PIN, RELIABILITY AND MAINTAINABILITY REQUIREMENTS FOR
MIL-B-8831/2 NOT 1 BOLT, 100 DEG REDUCED FLUSH HEAD, STRAIGHT SHANK, EXPANDABLE
ALUMINUM ALLOY SLEEVE, ALLOY STEEL PIN, 108 KSI FSU
MIL-B-8831/3 NOT 1 BOLT, PROTRUDING HEAD, EXTERNAL WRENCHING, STRAIGHT
SHANK, EXPANDABLE ALUMINUM ALLOY SLEEVE, ALLOY STEEL PIN, 180 KS1 FTU
MIL-B-8831/4 NOT 1 BOLT, 100 DEG REDUCED FLUSH HEAD, LOW INTERFERENCE,
STRAIGHT SHANK, EXPANDABLE ALUMINUM ALLOY SLEEVE, ALLOY STEEL PIN, 108
KSI FSU
MIL-B-8831/5 NOT 1 BOLT, PROTRUDING HEAD, EXTERNAL WRENCHING, STRAIGHT
SHANK, LOW INTERFERENCE, EXPANDABLE ALUMINUM ALLOY SLEEVE, ALLOY STEEL
PIN, 180 KSI FTU
MIL-B-8831B(2) SUP 1 NOT 1 BOLT, 180 KSI FTU AND 180 KSI FSU, 450 DEG
F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR (S/S BY NASM8831)
MIL-B-8906/2A NOT 3 BOLTS, SHEAR, STEEL, 132 KSI FSU, 450 DEG. F (S/S
BY NASM8906/2)
MIL-B-8906C(2) NOT 1 BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI FSU
AND 220 KSI FTU), 450 DEG. F, SPLINE DRIVE, GENERAL SPECIFICATION FOR
(S/S BY NASM8906)
MIL-B-8907A(1) NOT 1 BOLT, ALLOY STEEL, SHEAR AND+ TENSILE (156 KSI FSU
AND 260 KSI FTU,450 DEG. F) EXTERNAL WRENCHING,FLANGED HEAD (S/S BY NASM8907)
MIL-DTL-85667/12A BOLT, SLEEVE, 100 DEG. TENSION FLUSH HEAD, STRAIGHT
SHANK, CRES 304 SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU
MIL-DTL-85667/3B BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304
SLEEVE, CRES PH 13-8MO PIN, 220 KSI FSU
MIL-DTL-85667/5B(1) BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, TITANIUM
ALLOY PIN, 160 KSI FTU
MIL-DTL-85667/7B BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304
SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 220 KSI FTU, 450
MIL-P-23470/14A NOT 1 PIN-RIVET, BUTTON HEAD, STRAIGHT SHANK, ALUMINUM
ALLOY(NO S/S DOCUMENT)
MIL-P-23470/1A NOT 1 PIN RIVET, THREADED, BUTTON HEAD, STRAIGHT SHANK,
CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470C SUP 1 NOT 1 PIN-RIVET, THREADED AND COLLAR,PIN-RIV ET, THREADED,
TORQUE CONTROLLED, PRE--STRESS,SELF-LOCKING, GENERAL SPECIFICATION FOR
(NO S/S DOCUMENT)
MIL-STD-1251A NOT 1 SCREW AND BOLTS PREFERRED FOR DESIGN, LISTING OF (NO
S/S DOCUMENT)
MS14157B NOT 2 BOLT, WHEEL, TENSION, FLANGED STEEL, 180KSI FTU, 450 DEG.
F EXTERNAL SPLINE DRIVE (S/S BY NASM14157)
MS14163B NOT 3 BOLT, WHEEL, TENSION, STEEL 220 KSI, FTU, 450 DEG. F EXTERNAL
WRENCHING, SPLINE DRIVE, FLANGED HEAD (USE NASM14490)
MS14181C(1) NOT 1 BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU, EXTERNAL
WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM14181)
MS14490C NOT 1 BOLT, WHEEL, NICKEL ALLOY 718, 220 KSI FTU, 132 KSI FSU,
450 DEG. F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM14490)
MS15601 LAMP, INCANDESCENT, A 19, MEDIUM SCREW (S/S BY MS 15586)
MS15992 BOLT-SELF-LOCKING, 250 DEG F
MS15993 BOLT-SELF-LOCKING, 250 DEG. F.
MS15994 BOLT-SELF-LOCKING, 250 DEG. F.
MS15995 BOLT-SELF-LOCKING, 250 DEG. F.
MS15996 BOLT-SELF-LOCKING, 250 DEG. F.
MS15997 BOLT-SELF-LOCKING, 250 DEG. F.
MS15998 BOLT-SELF-LOCKING, 250 DEG. F.
MS15999 BOLT-SELF-LOCKING, 250 DEG. F.
MS16000 BOLT-SELF-LOCKING, 250 DEG. F.
MS16001 BOLT-SELF-LOCKING, 250 DEG. F.
MS16002 BOLT-SELF-LOCKING, 250 DEG. F.
MS16003 BOLT-SELF-LOCKING, 250 DEG. F.
MS16004 BOLT-SELF-LOCKING, 250 DEG. F.
MS16201A NOT 3 BOLTS, LAG, CONE POINT, COUNTERSUNK FLATHEAD, SLOTTED,
COPPER-SILICON ALLOY, NONMAGNETIC
MS16202 BOLTS, LAG, SQUARE BOLT HEAD, GIMLET OR CONE POINT, CORROSION-RESISTING
STEEL, NON-MAGNETIC
MS16204B NOT 2 BOLT, FINNED NECK, COUNTERSUNK FLATHEAD, UNC-2A, NON-MAGNETIC
MS16205A NOT 3 BOLTS, MACHINE, REGULAR SEMI-FINISHED HEXAGON HEAD, COPPER-SILICON
ALLOY (SILICON BRONZE), UNC-2A, NON-MAGNETIC (S/S BY NASM16205)
MS16206A NOT 3 BOLTS, MACHINE, HEXAGON HEAD, REGULAR SEMI-FINISHED, ALUMINUM
ALLOY, UNC-2A NONMAGNETIC (S/S BY NASM16206)
MS16207C NOT 3 BOLTS, SQUARE NECK, (CARRIAGE BOLT), ROUND HEAD, UNC-2A,
COPPER-SILICON ALLOY, NONMAGNETIC
MS16208B NOT 1 BOLTS, MACHINE, HEXAGON HEAD, SEMIFINISHED CORROSION RESISTING
STEEL UNC-2A, NONMAGNETIC (S/S BY NASM16208)
MS16209 BOLTS, LAG, SQUARE BOLT HEAD, COPPER SILICON ALLOY, GIMLET OR
CONE POINT, NONMAGNETIC (USE MS 16992)
MS16230 BOLT, LAG, SQUARE HEAD, SILICON BRONZE, GIMLET POINT
MS16231 BLT, LAG, SQUARE HEAD, CARBON STEEL UNCOATED, GIMLET POINT
MS16232 BOLT, LAG, SQUARE HEAD, CARBON STEEL ZINC OR CADMIUM COATED, GIMLET
POINT
MS16233 BOLT, LAG, SQUARE HEAD, CORROSION RESISTING STEEL, GIMLET POINT
MS16992F NOT 2 SCREW, LAG (BOLT), HEX HEAD, GIMLET POINT (NO S/S DOCUMENT)
MS18115C BOLTS, SELF RETAINING, POSITIVE LOCKING, STEEL 75 KSI, FSU, 125
KSI FTU, HEX, SLOTTED HEAD, 450 DEG. F (S/S BY MS3369)
MS20004THRUMS20024E NOT 1 BOLTS, INTERNAL WRENCHING, 160 KSI FTU AND 96
KSI FSU (S/S BY NASM20004THRU20024)
MS20033THRUMS20046C NOT 1 BOLT, MACHINE, HEXAGON HEAD, 1200 DEG. F (S/S
BY NASM20033THRU20046)
MS20069B NOT 3 BOLT, SQUARE NECK, CARRIAGE, HOT GALVANIZED (POLE LINE)
MS20070A BOLT EYE, (LAG SCREW THREAD) (NO S/S DOCUMENT)
MS20071 BOLT, EYE, DOUBLE ARMING (FOR POLELINE USE)
MS20072 BOLT, EYE, OVAL
MS20073B NOT 2 BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, FINE THREAD (S/S
BY NASM20073)
MS20074B NOT 2 BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, COARSE THREAD (S/S
BY NASM20074)
MS21091 NOT 2 BOLT, SELF-LOCKING, 250 DEG. F., STEEL, 75 KSI FSU, 125
KSI FTU, 100 DEG. FLASH HEAD CROSS RECESSED
MS21092A NOT 2 BOLT, SELF-LOCKING, 250 DEG. F, CRES, 48 KSI FSU, 80 KSI
FTU, 100 DEG. FLUSH HEAD, CROSS RECESSED
MS21094(1) NOT 1 BOLT, SELF-LOCKING, 250 DEG.F., STEEL, 75 KSI FSU, 125
KSI FTU, HEX HEAD (S/S BY NASM21094)
MS21095A NOT 2 BOLT, SELF-LOCKING, 250 DEG. F, CRES, 48 KSI FSU, 80 KSI
FTU, HEX HEAD (S/S BY NASM21095)
MS21096C(1) NOT 1 BOLT, SELF-LOCKING, 75 KSI FSU, 125 KSI FTU PAN HEAD,
CROSS RECESSED (S/S BY NASM21096)
MS21097E NOT 1 BOLT, SELF-LOCKING, 250 DEG. F, CRES, 48 KSI FSU, 80 KSI
FTU, PAN HEAD, CROSS RECESSED (S.S BY NASM21097)
MS21098(1) NOT 1 BOLT, SELF.LOCKING, STEEL, 160 KSI, FTU 250 DEG. F, 12
POINT, EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS) (S/S BY NASM21098)
MS21099 NOT 2 BOLT, SELF LOCKING, CORROSION RESISTING STEEL, 80 KSI FTU,
250 DEG. F, 12-POINT, EXTERNAL WRENCHING (EXTERNALLY WRENCHING CAP SCREWS)
MS21125F NOT 1 BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU,
63 KSI FTU, PAN HEAD, 450 DEG. F AND 650 DEG. F (S/S BY NASM21125)
MS21130E NOT 1 BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU,
63 KSI FTU, 100 DEG. FLUSH HEAD, 450 DEG. F AND 650 DEG. F (S/S BY NASM21130)
MS21134 NOT 2 BOLT, TENSION, STEEL, 180 KSI FTU, 450 DEGREE F, EXTERNAL
WRENCHING, SPLINE DRIVE, FLANGED (S/S BY NASM21134)
MS21250L NOT 2 BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12-POINT,
180 KSI FTU, 450 DEG F (S/S BY NASM21250)
MS21277B NOT 1 SCREW, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.138-40 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS21278B NOT 1 SCREW, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.164-36 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS21279B(1) NOT 1 BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.190-32 (MIL-S-8879) (ASG)
MS21280B NOT 1 BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.250-28 (MIL-S-8879 THREAD)
MS21281B NOT 1 BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.3125-24 (MIL-S-8879 THREAD)
MS21282B NOT 1 BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.375-24 (MIL-S-8879 THREAD)
MS21283B BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER, .4375-20
(MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS21284B NOT 1 BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER,
.500-20 (MIL-S-8879 THREAD)
MS21285B NOT 1 BOLT, MACHINE-STEEL, DOUBLE HEXAGON, EXTENDED WASHER, .5625-18
(MIL-S-8879 THREAD) (S/S BY MS9571)
MS21286B NOT 1 SCREW, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .138-40 (MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS21287B NOT 2 SCREW, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .164-36 (MIL-S-8879 THREAD) (S/S BY NASM21287)
MS21288B NOT 1 BOLT, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .190-32 (MIL-S-8879 THREAD)
MS21289C BOLT, MACHINE-STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER, 250-28
(MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS21290B NOT 1 BOLT, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .3125-24 (MIL-S-8879 THREAD)
MS21291B NOT 1 BOLT, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .375-24 (MIL-S-8879 THREAD)
MS21292B NOT 2 BOLT, MACHINE - STEEL, DRILLED, DOUBLE HEXAGON, EXTENDED
WASHER, .4375-20 (MIL-S-8879 THREAD)
MS21293B NOT 1 BOLT, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED
WASHER, .500-20 (MIL-S-8879 THREAD)
MS21294B NOT 2 BOLT, MACHINE - STEEL, DRILLED, DOUBLE HEXAGON, EXTENDED
WASHER, .5625-18 (MIL-S-8879 THREAD)
MS21295A NOT 2 SCREWS, SELF LOCKING, 250 DEG. F, CYLINDRICAL HEAD, HEXAGONAL
WRENCHING SOCKET, CORROSION RESISTING STEEL, 80 KSI FTU (SOCKET HEAD CAP
SCREWS) (S/S BY NASM21295)
MS21296A NOT 2 BOLT, TENSION, STEEL; 260 KSI FTU, 450 DEG. F, EXTERNAL
WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM21296)
MS21297A NOT 4 BOLT, TENSION, STEEL, 220 KSI FTU, 450 DEG. F, EXTERNAL
WRENCHING, SPLINE DRIVE, FLANGED HEAD (S/S BY NASM21297)
MS27576E NOT 1 BOLT, SELF-RETAINING, IMPEDANCE TYPE, 95 KSI FSU, HEX HEAD,
450 DEG. F (S/S BY NASM27576)
MS27950A NOT 2 BOLT, EYE - TURNBUCKLE (GENERAL PURPOSE)
MS27953B(1) NOT 1 BOLT, HOOK-TURNBUCKLE (GENERAL PURPOSE) (S/S BY NASM27953)
MS33602 NOT 2 BOLTS, SELF-RETAINING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY,
DESIGN AND USAGE REQUIREMENTS FOR (S/S BY NASM33602)
MS3369D NOT 1 BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU,
63 KSI FTU, HEXAGON SLOTTED HEAD, 450 DEG. F AND 650 DEG F. (S/S BY NASM3369)
MS35355B NOT 1 BOLT, MACHINE, SQUARE HEAD, STEEL, CADMIUM OR ZINC PLATED,
UNC-2A
MS35356A NOT 2 BOLT, MACHINE, SQUARE HEAD, STEEL, PHOSPHATE COATED, UNC-2A
MS35474C BOLT, OVAL NECK, TRACK (S/S BY ANSI B18.10)
MS35751E NOT 1 BOLT, SQUARE NECK, ROUND HEAD (CARRIAGE), STEEL, CADMIUM
OR ZINC PLATED, UNC-2A (S/S BY NASM35751)
MS35752A BOLT, SQUARE NECK, TRUSS HEAD, (STEP) STEEL, CADMIUM OR ZINC
PLATED, UNC-2A (SEE MS 35751)
MS35753A BOLT, SQUARE NECK, FLAT HEAD, (ELEVATOR) STEEL, CADMIUM OR ZINC
PLATED, UNC-2A (USE MS35754)
MS35754B NOT 1 BOLT, SQUARE NECK, COUNTERSUNK, (PLOW) STEEL, CADMIUM OR
ZINC PLATED, NC-2A AND UNC-2A
MS35763E NOT 1 BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL, GRADE 5, UNC-2A
AND UNF-2A
MS35764E NOT 1 BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL, GRADE 8, UNC-2A
AND UNF-2A
MS35798B NOT 3 BOLT, MACHINE, SQUARE HEAD, HOT GALVANIZED (POLE LINE)
MS35799C NOT 3 ROD, CONTINUOUS THREAD, DOUBLE ARMING, HOT GALVANIZED,
(POLE LINE)
MS35800 NOT 1 BOLT, LAG, GIMLET POINT HOT GALVANIZED (POLE-LINE) (NO S/S
DOCUMENT)
MS35801A NOT 1 BOLT, LAG, FETTER DRIVE HOT GALVANIZED (POLE-LINE)
MS51933 NOT 2 BOLT WELDING FINE THREAD
MS51934A NOT 2 BOLT, WELDING&COARSE THREAD
MS51937C NOT 1 BOLT, EYE, SHOULDER UNC-2A AND UNF-2A
MS51946D NOT 1 BOLT, RIBBED SHOULDER, SINGLE END, SPLINED, 3/4 INCH
MS51947B NOT 1 BOLT, RIBBED SHOULDER. WHEEL MOUNTING SINGLE END, 3/4 INCH,
EXTENDED LENGTH
MS51948C NOT 1 BOLT, RIBBED SHOULDER, SINGLE END, SPINED, 7/16 AND 1/2
INCH
MS51949B NOT 2 BOLT, SHOULDER, WHEEL MOUNTING, SINGLE END, KEYED HEAD
MS9060C BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, DRILLED, .190-32 NS
MS9061A NOT 1 BOLT, MACHINE - CRES AMS 5735, DOUBLE HEXAGON EXTENDED WASHER
HEAD, DRILLED, .250-28
MS9063B(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, DRILLED, .375-24 NS
MS9064B NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, DRILLED, .4375-20 NS (NO S/S DOCUMENT)
MS9065B NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, DRILLED, .500-20 NS (NO S/S DOCUMENT)
MS9066B NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, DRILLED, .5625-18 NS (NO S/S DOCUMENT)
MS90729A NOT 2 BOLT, TEE HEAD
MS9088A NOT 2 BOLT, MACHINE, STEEL, DRILLED 12 POINT HEAD, .190 (NO. 10)-32
(CADMIUM PLATE)
MS9089C NOT 1 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .250-28 UNF-3A
MS9090C NOT 1 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .3125-18 UNF-3A
MS9091C NOT 2 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .375-24 UNF-3A
MS9092C NOT 2 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .4375-20 UNF-3A
MS9093C NOT 1 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .500-20 UNF-3A
MS9094C NOT 1 BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .5625-18 UNF-3A
(NO S/S DOCUMENT)
MS9110 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, AMS 5731 .190-32 UNJF-3A (S/S BY SAE-AS91101)
MS9111 NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, AMS 5731, .250-28 UNJF-3A (SS BY SAE-AS91111)
MS9112 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, AMS 5731, .3125-24 UNJF-3A (S/S BY SAE-AS9112)
MS9113 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, AMS 5731, .375-24 UNJF-3A
MS9146B NOT 1 BOLT, MACHINE, 12 POINT HEAD, STEEL, .190-32 UNF-3A
MS9147B NOT 2 BOLT, MACHINE, 12 POINT HEAD, STEEL, .250-28 UNF-3A
MS9148B NOT 1 BOLT, MACHINE, 12 POINT HEAD, STEEL, .3125-24 UNF-3A
MS9149B NOT 1 BOLT, MACHINE, 12 POINT HEAD, STEEL, .375-24UNF-3A
MS9150B NOT 1 BOLT, MACHINE, 12 POINT HEAD, STEEL, .4375-20 UNF-3A (NO
S/S DOCUMENT)
MS9151B NOT 1 BOLT, MACHINE, 12 POINT HEAD, STEEL, .500-20 UNF-3A (NO
S/S DOCUMENT)
MS9152B NOT 1 BOLT MACHINE, STEEL, 12 POINT HEAD, .5625-18, CADMIUM PLATE
MS9157B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .190 (NO. 10)-32, BLACK
OXIDE (NO S/S DOCUMENT)
MS9158A NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .250-28, BLACK OXIDE
(S/S BY SAE-AS9158)
MS9159B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .3125-24, BLACK OXIDE
(NO S/S DOCUMENT)
MS9160A NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .375-24, BLACK OXIDE
(S/S BY SAE-AS91601)
MS9161B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .4375-20, BLACK OXIDE
(NO S/S DOCUMENT)
MS9162B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .500-20, BLACK OXIDE
(NO S/S DOCUMENT)
MS9163B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .5625-18, BLACK OXIDE
(NO S/S DOCUMENT)
MS9169A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .190 (NO. 10)-32,
BLACK OXIDE (ASG) (S/S BY SAE-AS91691)
MS9170A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .250-28, BLACK
OXIDE (ASG) (S/S BY SAE-AS91701)
MS9171A NOT 2 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .3125-24, BLACK
OXIDE (S/S BY SAE-AS91711)
MS9172A NOT 2 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .375-24, BLACK
OXIDE (S/S BY SAE-AS91721)
MS9173A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .4375-20, BLACK
OXIDE (ASG) (NO S/S DOCUMENT)
MS9174A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .500-20, BLACK
OXIDE (ASG) (NO S/S DOCUMENT)
MS9175A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .5625-18, BLACK
OXIDE (ASG) (NO S/S DOCUMENT)
MS9184A NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .164 (NO. 8)-36,
CADMIUM PLATE (NO S/S DOCUMENT)
MS9186B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .164 (NO. 8)-36, CADMIUM
PLATE (NO S/S DOCUMENT)
MS9190B NOT 1 BOLT-MACHINE, STEEL, 12 POINT HEAD, .164 (NO. 8)-36, BLACK
OXIDE (NO S/S DOCUMENT)
MS9191C NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .138 (NO. 6)-40,
BLACK OXIDE (NO S/S DOCUMENT)
MS9192B NOT 1 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .164(NO.8)-36
CADMIUM PLATE
MS9208 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
DOUBLE HEXAGON EXTENDED WASHER HEAD, .190-32 UNJF-3A (S/S BY SAE-AS9208)
MS9209 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
DOUBLE HEXAGON EXTENDED WASHER HEAD, .250-28 UNJF-3A (S/S BY SAE-AS9209)
MS9210 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
DOUBLE HEXAGON EXTENDED WASHER HEAD, .3125-24 UNJF-3A (S/S BY SAE-AS9210)
MS9211A NOT 3 BOLT, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE
HEXAGON EXTENDED WASHER HEAD, .375-24 UNJF-3A
MS9212(1) NOT 1 BOLT, MACHINE-STEEL AMS 6304, DIFFUSED NICKEL-CADIUM PLATED,
DOUBLE HEXAGON EXTENDED WASHER HEAD, .4375-20 UNJF-3A (S/S BY SAE-AS9212)
MS9213A NOT 3 BOLT, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE
HEXAGON EXTENDED WASHER HEAD, .500-20 UNJF-3A
MS9214C NOT 3 BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, STEEL,
.5625-18 UNJF-3A
MS9217 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE,
DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .190-32 UNJF-3A (S/S BY
SAE-AS9217)
MS9218 NOT 2 BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A (S/S
BY SAE-AS9218)
MS9219 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE,
DOUBLE HEXAGON EXTENDED WASHER HEAD, .3125-24 UNJF-3A (S/S BY SAE-AS9219)
MS9220A(1) NOT 3 BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE
HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24 UNJF-3A
MS9221A NOT 3 BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE
HEXAGON EXTENDED WASHER HEAD, DRILLED, .4375-20 UNJF-3A
MS9222A NOT 3 BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE
HEXAGON EXTENDED WASHER HEAD, DRILLED, .500-20 UNJF-3A
MS9223A NOT 3 BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE
HEXAGON EXTENDED WASHER HEAD, DRILLED, .5625-18 UNJF-3A
MS9283 NOT 2 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.190-32 UNJF-3A (S/S BY SAE-AS9283)
MS9284 NOT 2 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.250-28 UNJF-3A (S/S BY SAE-AS9284)
MS9285(1) NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.3125-24 UNJF-3A (S/S BY SAE-AS9285)
MS9286 NOT 2 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.375-24 UNJF-3A (S/S BY SAE-AS9286)
MS9287A(1) NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.4375-20 UNJF-3A
MS9288A BOLT, MACHINE STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .500-20
UNJF-3A
MS9289A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.5625-18 UNJF-3A
MS9290A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.624-18 UNJF-3A
MS9291A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD,
.750-16 UNJF-3A
MS9294(1) NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1
HOLE, HEXAGON HEAD, .190-32 UNJF-3A (S/S BY SAE-AS9294)
MS9295 NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .250-28 UNJF-3A
MS9296 NOT 2 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .3125-24 UNJF-3A (S/S BY SAE-AS9296)
MS9297 NOT 2 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .375-24 UNJF-3A (S/S BY SAE-AS9297)
MS9298A(1) NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE,DRILLED 1 HOLE,
HEXAGON HEAD, .4375-20 UNJF-3A
MS9299A NOT 1 BOLT, MACHINE STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .500-20 UNJF-3A
MS9300A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .5625-18 UNJF-3A
MS9301A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON, .625-18 UNJF-3A
MS9302A NOT 1 BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE,
HEXAGON HEAD, .750-16 UNJF-3A
MS9397(1) NOT 1 BOLT, TEE HEAD - AMS 6322, CHAMFERED, .190-32 UNJF-3A,
CADMIUM PLATE (ASG) (S/S BY SAE-AS9397)
MS9398 NOT 1 BOLT, TEE HEAD - AMS 6322, CHAMFERED, .250-28 UNJF-3A, CADIUM
PLATE(ASG) (S/S BY SAE-AS9398)
MS9399 NOT 2 BOLT, TEE HEAD-AMS 6322, CHAMFERED, .3125-24 UNJF-3A, CADMIUM
PLATE (S/S BY SAE-AS9399)
MS9400 NOT 2 BOLT, TEE HEAD AMS 6322, CHAMFERED, .375-24 UNJF -3A, CADMIUM
PLATE (S/S BY SAE-AS9400)
MS9401 NOT 2 BOLT, TEE HEAD, AMS6322, CHAMFERED, .4375-20UNJF-3A, CADMIUM
PLATE (S/S BY SAE-AS9401)
MS9402 NOT 2 BOLT, TEE HEAD AMS 6322, CHAMFERED, .500-20 UNJF-3A, CADMIUM
PLATE (S/S BY SAE-AS9402)
MS9432 NOT 2 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .190-32 UNJF-3A (S/S
BY SAE-AS9432)
MS9433(1) NOT 1 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .250-28 UNJF-3A
(ASG) (S/S BY SAE-AS9433)
MS9434(1) NOT 1 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .3125-24 UNJF-3A
(ASG) (S/S BY SAE-AS9434)
MS9435 NOT 1 BOLT, TEE HEAD AND AMS 5735, CHAMFERED, .375-24 UNJF-3A (ASG)
MS9436 NOT 1 BOLT, TEE HEAD AND AMS 5735, CHAMFERED, .4375-20 UNJF-3A
(ASG)
MS9437 NOT 1 BOLT, TEE HEAD AND AMS 5735, CHAMFERED, .500-20 UNJF-3A (ASG)
MS9440 NOT 2 BOLT, MACHINE STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
HEXAGON HEAD, DRILLED, .190-32 UNJF-3A (S/S BY SAE-AS9440)
MS9441 NOT 2 BOLT, MACHINE STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
HEXAGON HEAD, DRILLED, .250-28 UNJF-3A (S/S BY SAE-AS9441)
MS9442(1) NOT 1 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .3125-24 UNJF-3A (ASG) (S/S BY SAE-AS9442)
MS9443(1) NOT 1 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .375-24 UNJF-3A
MS9444 NOT 2 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED,
HEXAGON HEAD, DRILLED, .4375-20 UNJF-3A (S/S BY SAE-AS9444)
MS9445(1) NOT 1 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .500-20 UNJF-3A
MS9446(1) NOT 1 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .5625-18 UNJF-3A
MS9447(1) NOT 1 BOLT, MACHINE-STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM,
PLATED, HEXAGON HEAD, DRILLED, .625-18 UNJF-3A
MS9448 NOT 1 BOLT, MACHINE AND STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM
PLATED, HEXAGON HEAD, DRILLED, .750-16 UNJF-3A (ASG)
MS9451A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .190-32 UNJF-3A (S/S
BY SAE-AS9451)
MS9452A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .250-28 UNJF-3A (S/S
BY SAE-AS9452)
MS9453A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .3125-24 UNJF-3A
(S/S BY SAE-AS9453)
MS9454A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .375-24 UNJF-3A (S/S
BY SAE-AS9454)
MS9455A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .4375-20 UNJF-3A
(S/S BY SAE-AS9455)
MS9456A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .500-20 UNJF-3A (S/S
BY SAE-AS945)
MS9457A(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .5625-18 UNJF-3A
(S/S BY SAE-AS9457)
MS9458B(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .625-18 UNJF-3A (S/S
BY SAE-AS9458)
MS9459C(1) NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, .750-16 UNJF-3A (S/S
BY SAE-AS9459)
MS9489A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK AMS 5731, .190-32
UNJF-3A (S/S BY SAE-AS9489)
MS9490A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .250-28
UNJF-3A (S/S BY SAE-AS9490)
MS9491A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .3125-24
UNJF-3A (S/S BY SAE-AS9491)
MS9492A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .375-24
UNJF-3A (S/S BY SAE-AS9492)
MS9493A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .4375-20
UNJF-3A (S/S BY SAE-AS9493)
MS9494A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .500-20
UNJF-3A (S/S BY SAE-AS9494)
MS9495A NOT 1 BOLT, MACHINE, HEXAGON HEAD, FULL SHANK, AMS 5731, .5625-18
UNJF-3A (NO S/S DOCUMENT)
MS9496A(1) NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .625-18
UNJF-3A (S/S BY SAE-AS9496)
MS9497C NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .750-16
UNJF-3A (NO S/S DOCUMENT)
MS9500A(1) NOT 2 BOLT, MACHINED - HEXAGON HEAD, DRILLED, 1 HOLE, FULL
SHANK, AMS 5731, .190-32 UNJF-3A (S/S BY SAE-AS9500)
MS9501A(1) NOT 2 BOLT, MACHINED - HEXAGON HEAD, DRILLED, 1 HOLE, FULL
SHANK, AMS 5731, .250-28 UNJF-3A (S/S BY SAE-AS9501)
MS9502A(1) NOT 2 BOLT, MACHINED-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5731, .3125-24 UNJF-3A (S/S BY SAE-AS9502)
MS9503A(1) NOT 2 BOLT, MACHINED-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5731, .375-24 UNJF-3A (S/S BY SAE-AS9503)
MS9504A BOLT, MACHINED - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5731, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9505A(1) NOT 2 BOLT, MACHINED-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5731, .500-20 UNJF-3A (S/S BY SAE-AS9505)
MS9506C BOLT, MACHINED - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5731, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9507C BOLT, MACHINED-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5731, .625-18 UNJF-3A (NO S/S DOCUMENT)
MS9508A BOLT, MACHINED - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5731, .750-16 UNJF-3A (NO S/S DOCUMENT)
MS9518A NOT 2 BOLT, MACHINE, HEXAGON HEAD STEEL, CADMIUM PLATED .190-32
UNJF-3A (S/S BY SAE-AS9518)
MS9519A NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .250-28UNJF-3A
(S/S BY SAE-AS9519)
MS9520A NOT 1 BOLT, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD,
.3125-24 UNJF-3A (S/S BY SAE-AS9520)
MS9521A NOT 1 BOLT, MACHINE, HEXAGONHEAD, STEEL CADMIUM P LATED,.375-24UNJF
-3A (S/S BY SAE-AS9521)
MS9522C NOT 2 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .4375-20UNJF-3A
(S/S BY SAE-AS9522)
MS9523A NOT 2 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .500-20
UNJF-3A (S/S BY SAE-AS9523)
MS9524C NOT 1 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .5625-18UNJF-3A
(S/S BY SAE-AS9524)
MS9525A NOT 2 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .625-18UNJF-3A
(S/S BY SAE-AS9525)
MS9526A NOT 2 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .750-16UNJF-3A
(S/S BY SAE-AS9526)
MS9529(1) NOT 2 BOLT, MACHINE, STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A (S/S BY SAE-AS9529)
MS9530(1) NOT 2 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A (S/S BY SAE-AS9530)
MS9531(1) NOT 2 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A (S/S BY SAE-AS9531)
MS9532(1) NOT 2 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A (S/S BY SAE-AS9532)
MS9533(1) NOT 2 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A (S/S BY SAE-AS9533)
MS9534(1) NOT 2 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATE, DRILLED,
1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A (S/S BY SAE-AS9534)
MS9535 NOT 1 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE,
HEXAGON HEAD, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9536 NOT 1 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE,
HEXAGON HEAD, .625-18 UNJF-3A (NO S/S DOCUMENT)
MS9537 NOT 1 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE,
HEXAGON HEAD, .750-16 UNJF-3A (NO S/S DOCUMENT)
MS9556C(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .190-32 UNJF-3A (S/S BY SAE-AS9556)
MS9557E(2) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .250-28 UNJF-3A (S/S BY SAE-AS9557)
MS9558E(2) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A (S/S BY SAE-AS9558)
MS9559E(2) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .375-24 UNJF-3A (S/S BY SAE-AS9559)
MS9560G(2) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .4375-24 UNJF-3A
MS9561E(2) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .500-20 UNJF-3A
MS9562C BOLT, MACHINED-DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
AMS 5731, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9565A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS 5731, .190-32 UNJF-3A (S/S BY SAE-AS9565)
MS9566A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS 5731, .250-28 UNJF-3A (S/S BY SAE-AS9566)
MS9567A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS 5731, .3125-24 UNJF-3A (S/S BY SAE-AS9567)
MS9568A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
PD SHANK, DRILLED, AMS 5731, .375-24 UNJF-3A (S/S BY SAE-AS9568)
MS9569C BOLT, MACHINED-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, AMS 5731, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9570C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS5731, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9571A BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, AMS 5731, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9574B(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .190-32 UNJF-3A (S/S BY SAE-AS9574)
MS9575B(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .250-28 UNJF-3A (S/S BY SAE-AS9575)
MS9576D(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .3125-24 UNJF-3A (S/S BY SAE-AS9576)
MS9577B(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .375-24 UNJF-3A (S/S BY SAE-AS9577)
MS9578D(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .4375-20 UNJF-3A
MS9579C NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, AMS 5731, SILVER PLATED, .500-20 UNJF-3A (S/S BY SAE-AS9579)
MS9580D(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, SILVER PLATED, .5625-18 UNJF-3A
MS9583B(1) NOT 2 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.190-32 UNJF-3A (S/S BY SAE-AS9583)
MS9584B(1) NOT 2 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.250-28 UNJF-3A (S/S BY SAE-AS9584)
MS9585B(1) NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.3125-24 UNJF-3A (S/S BY SAE-AS9585)
MS9586B(1) NOT 2 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.375-24 UNJF-3A (S/S BY SAE-AS9586)
MS9587B(1) NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.4375-20 UNJF-3A (S/S BY SAE-AS9587)
MS9588D(1) NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.500-20 UNJF-3A (S/S BY SAE-AS9588)
MS9589D(1) NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.5625-18 UNJF-3A (S/S BY SAE-AS9589)
MS9590D NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.625-18 UNJF-3A (NO S/S DOCUMENT)
MS9591B NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK,
.750-16 UNJF-3A (NO S/S DOCUMENT)
MS9624B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .190-32 UNJF-3A (NO S/S DOCUMENT)
MS9625B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .250-28 UNJF-3A (NO S/S DOCUMENT)
MS9626B BOLT, MACHINE-HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9627B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9628B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9629B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, TITANIUM
AMS 4967, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9630B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
TITANIUM AMS 4967, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9633 NOT 2 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967,
.190-32 UNJF-3A (S/S BY SAE-AS9633)
MS9634B BOLT, MACHINE-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967, .250-28
UNJF-3A (NO S/S DOCUMENT)
MS9635B BOLT, MACHINE-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967, .3125-24
UNJF3A (NO S/S DOCUMENT)
MS9636B NOT 1 BOLT, MACHINE-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967,
.375-24 UNJF-3 (NO S/S DOCUMENT)
MS9637B BOLT, MACHINE-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967, .4375-20
UNJF-3 (NO S/S DOCUMENT)
MS9638 NOT 2 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967,
.500-20 UNJF-3A (S/S BY SAE-AS9638)
MS9639B BOLT, MACHINE-HEXAGON HEAD, PD SHANK, TITANIUM AMS 4967, .5625-18
UNJF-3 (NO S/S DOCUMENT)
MS9642B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM
AMS 4967, .500-20 UNJF-3 (NO S/S DOCUMENT)
MS9643B NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
TITANIUM AMS 4967, .250-28 UNJF-3A (NO S/S DOCUMENT)
MS9644B NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
TITANIUM AMS 4967, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9645B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM
AMS 4967, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9646B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM
AMS 4967, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9647B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, TITANIUM
AMS 4967, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9648B NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
TITANIUM AMS 4967, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9651 NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.190-32 UNJF-3A (NO S/S DOCUMENT)
MS9652B NOT 1 BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.250-28 UNJF-3A (NO S/S DOCUMENT)
MS9653B NOT 1 BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9654B NOT 1 BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.375-24 UNJF-3A (NO S/S DOCUMENT)
MS9655B NOT 1 BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9656B NOT 1 BOLT, MACHINE-HEXAGON HEAD, FULL SHANK, TITANIUM AMS 4967,
.500-20 UNJF-3A (NO S/S DOCUMENT)
MS9657B NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, TITANIUM, AMS
4967, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9676(1) NOT 2 BOLT, MACHINE-CRES AMS 5731, DOUBLE HEXAGON EXTENDED WASHER
HEAD, CUP WASHER LOCKED, .190-32 UNJF-3A (S/S BY SAE-AS9676)
MS9677B(1) NOT 2 BOLT, MACHINE-CRES, AMS5731, DOUBLE HEXAGON, EXTENDED
WASHER HEAD, CUP WASHER LOCKED, .250-28 UNJF-3A (S/S BY SAE-AS9677)
MS9678B(1) NOT 2 BOLT, MACHINE-CRES, AMS 5731, DOUBLE HEXAGON, EXTENDED
WASHER HEAD, CUP WASHER LOCKED, .3125-24 UNJF-3A (S/S BY SAE-AS9678)
MS9679B(1) NOT 1 BOLT, MACHINE-CRES, AMS5731, DOUBLE HEXAGON, EXTENDED
WASHER HEAD, CUP WASHER LOCKED, .375-24 UNJF-3A (S/S BY SAE-AS9679)
MS9680B(1) NOT 1 BOLT, MACHINE-STEEL, AMS 6322, CADMIUM PLATED, DOUBLE
HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED, .190-32 UNJF-3A (S/S
BY SAE-AS9680)
MS9681B NOT 2 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON
EXTENDED WASHER HEAD, CUPWASHER LOCKED, .250-28 UNJF-3A (S/S BY SAE-AS9681)
MS9682B NOT 1 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON,
EXTENDED WASHER HEAD, CUPWASHER LOCKED, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9683B NOT 1 BOLT, MACHINE-STEEL AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON
EXTENDED WASHER HEAD, CUPWASHER LOCKED, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9685 NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .190-32 UNJF-3A (S/S BY
SAE-AS9685)
MS9686 NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .250-28 UNJF-3A (S/S BY
SAE-AS9686)
MS9687 NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .3125-24 UNJF-3A (S/S BY
SAE-AS9687)
MS9688 NOT 3 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL,
DIFFUSED NICKEL CADIUM, .375-24 UNJF-3A
MS9689 NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, STEEL
AMS 6304, DIFFUSED NICKEL CADMIUM PLATE .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9690 NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE .500-20 UNJF-3A (NO S/S
DOCUMENT)
MS9691 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL
AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9692 NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, STEEL
AMS 6304, DIFFUSED NICKEL CADMIUM PLATE .625-18 UNJF-3A (NO S/S DOCUMENT)
MS9693 NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, STEEL
AMS 6304, DIFFUSED NICKEL CADMIUM PLATE .750-16 UNJF-3A (NO S/S DOCUMENT)
MS9696A NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .190-32 UNJF-3A (S/S BY SAE-AS9696)
MS9697A NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .250-28 UNJF-3A (S/S BY SAE-AS9697)
MS9698A NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER, HEAD, CORROSION
AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A (S/S BY SAE-AS9698)
MS9699A NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .375-24 UNJF-3A (S/S BY SAE-AS9699)
MS9700A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A
MS9701A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9702A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION
AND HEAT RESISTANT STEEL, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9705A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .190-32 UNJF-3A (S/S BY SAE-AS9705)
MS9706A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A
MS9707C(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A
MS9708A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A
MS9709A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A
MS9710A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9711A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
CORROSION AND HEAT RESISTANT STEEL, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9714A(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .190-32 UNJF-3A (S/S
BY SAE-AS9714)
MS9715A(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A (S/S
BY SAE-AS9715)
MS9716A(1) NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A (S/S
BY SAE-AS9716)
MS9717A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A
MS9718A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A
MS9719A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .500-20 UNJF-3A (NO
S/S DOCUMENT)
MS9720A NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .5625-18 UNJF-3A (NO
S/S DOCUMENT)
MS9722C NOT 1 SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSED
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A (NO
S/S DOCUMENT)
MS9723D NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANCE STEEL, .190-32 UNJF-3A
MS9724A(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .250-28 USNJF-3A
(S/S BY SAE-AS9724)
MS9725C(1) NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A
MS9726C NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A (NO
S/S DOCUMENT)
MS9727C NOT 2 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A
MS9728D NOT 1 BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .500-20 UNJF-3A (NO
S/S DOCUMENT)
MS9729B NOT 1 BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE
TOLERANCE SHANK, AMS 5708, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9732(1) NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD
SHANK, CRES AMS 5643, .190-32 UNJF-3A (S/S BY SAE-AS9732)
MS9733(1) NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD
SHANK, CRES AMS 5643, .250-28 UNJF-3A (S/S BY SAE-AS9733)
MS9734 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, .3125-24 UNJF-3A (S/S BY SAE-AS9734)
MS9735 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9736 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS97371 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9738 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
CRES AMS 5643, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9741 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, .190-32 UNJF-3A (S/S BY SAE-AS9741)
MS9742 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, .250-28 UNJF-3A (S/S BY SAE-AS9742)
MS9743B NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9744 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, CRES AMS 5643, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9745 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, CRES AMS 5643, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9746 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, CRES AMS 5643, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9747 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, CRES AMS 5643, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9750 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .190-32 UNJF-3A (S/S BY SAE-AS9750)
MS9751 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .250-28 UNJF-3A (S/S BY SAE-AS9751)
MS9752 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9753 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9754 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9755 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9756 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
TITANIUM AMS 4967, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9759 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, TITANIUM AMS 4967, .190-32 UNJF-3A (S/S BY SAE-AS9759)
MS9760 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, TITANIUM AMS 4967, .250-28 UNJF-3A (S/S BY SAE-AS9760)
MS9761 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, TITANIUM AMS 4967, .3125-24 UNJF-3A (S/S BY SAE-AS9761)
MS9762 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, TITANIUM AMS 4967, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9763 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, TITANIUM AMS 4967, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9764 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, TITANIUM AMS 4967, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9765 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, TITANIUM AMS 4967, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9783 NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .190-32
UNJF-3A (S/S BY SAE-AS9783)
MS9784 NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .250-28
UNJF-3A (S/S BY SAE-AS9784)
MS9785 NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .3125-24
UNJF-3A (S/S BY SAE-AS9785)
MS9786 NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .375-24
UNJF-3A (S/S BY SAE-AS9786)
MS9787B NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .4375-20
UNJF-3A (NO S/S DOCUMENT)
MS9788 NOT 2 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .500-20
UNJF-3A (S/S BY SAE-AS9788)
MS9789B NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .5625-18
UNJF-3A (NO S/S DOCUMENT)
MS9790 NOT 2 BOLT, MACHINE, HEXAGON HEAD, FULL SHANK, AMS 5643, .625-18
UNJF-3A (S/S BY SAE-AS9790)
MS9791B NOT 1 BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5643, .750-16
UNJF-3A (NO S/S DOCUMENT)
MS9794B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .190-32 UNJF-3A (NO S/S DOCUMENT)
MS9795B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .250-28 UNJF-3A (NO S/S DOCUMENT)
MS9796B NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .3125-24 UNJF-3A (S/S BY SAE-AS9796)
MS9797B NOT 1 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9798B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9799B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK,
AMS 5643, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9800B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5643, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9801B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5643, .625-18 UNJF-3A (NO S/S DOCUMENT)
MS9802B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS
5643, .750-16 UNJF-3A (NO S/S DOCUMENT)
MS9805 NOT 2 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .190-32
UNJF-3A (S/S BY SAE-AS9805)
MS9806 NOT 2 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .250-28
UNJF-3A (S/S BY SAE-AS9806)
MS9807B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .3125-24
UNJF-3A (NO S/S DOCUMENT)
MS9808 NOT 2 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .375-24
UNJF-3A (S/S BY SAE-AS9808)
MS9809B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .4375-20
UNJF-3A (NO S/S DOCUMENT)
MS9810B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .500-20
UNJF-3A (NO S/S DOCUMENT)
MS9811B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .5625-18
UNJF-3A (NO S/S DOCUMENT)
MS9812B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .625-18
UNJF-3A (NO S/S DOCUMENT)
MS9813B NOT 1 BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5643, .750-16
UNJF-3A (NO S/S DOCUMENT)
MS9816 NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .190-32 UNJF-3A (S/S BY SAE-AS9816)
MS9817B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .250-28 UNJF-3A (NO S/S DOCUMENT)
MS9818B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9819B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9820B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9821 NOT 2 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .500-20 UNJF-3A (S/S BY SAE-AS9821)
MS9822B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9823B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .625-18 UNJF-3A (NO S/S DOCUMENT)
MS9824B NOT 1 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK,
AMS 5643, .750-16 UNJF-3A (NO S/S DOCUMENT)
MS9885 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, .190-32 UNJF-3A (S/S BY SAE-AS9885)
MS9886 NOT 3 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, .250-2B UNJF-3A
MS9887(1) NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, .3125-24 UNJF-3A (S/S BY SAE-AS9887)
MS9888 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS5616,
.375-24 UNJF-3A (NO S/S DOCUMENT)
MS9889 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS5616,
.4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9890 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, .500-20 UNJF-3A (S/S BY SAE-AS9890)
MS9891 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, AMS
5616, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9894 NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED
AMS 5616, .190-32 UNJF-3A (S/S BY SAE-AS9894)
MS9895 NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, 250-28 UNJF-3A (S/S BY SAE-AS9895)
MS9896 NOT 3 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .3125-24 UNJF-3A
MS9897 NOT 1 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9898 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9899 NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9900 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
AMS 5616, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9914 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A (S/S BY SAE-AS9914)
MS9915 NOT 3 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS 6322, CADMIUM PLATED, .250-28 UNJF-3A
MS9916 NOT 3 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS 6322, CADMIUM PLATED, .3125-24 UNJF-3A (S/S BY SAE-AS9916)
MS9917 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A (S/S BY SAE-AS9917)
MS9918 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS 6322, CADMIUM PLATED, .4375-20 UNJF-3A (S/S BY SAE-AS9918)
MS9919 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS6322, CADMIUM PLATED, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9920 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK,
STEEL AMS6322, CADMIUM PLATED, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9923 NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS 6322, CADIUM PLATED, .190-32 UNJF-3A (S/S BY SAE-AS9923)
MS9924 NOT 2 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS, CADMIUM PLATED, .250-28 UNJF-3A (S/S BY SAE-AS9924)
MS9925 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9926 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS6322, CADMIUM PLATED, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9927 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD
SHANK, STEEL AMS6322, CADMIUM PLATED, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9928A NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS 6322, CADMIUM PLATED, .500-20 UNJF-3A (S/S BY SAE-AS9928)
MS9929 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
PD SHANK, STEEL AMS6322, CADMIUM PLATED, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9932 NOT 3 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A
MS9933 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS 6322, CADMIUM PLATED, .250-28 UNJF-3A (S/S BY SAE-AS9933)
MS9934 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9935 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS6322, CADMIUM PLATED, .375-24 UNJF-3A (NO S/S DOCUMENT)
MS9936 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS6322 CADMIUM PLATED, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9937 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL
SHANK, STEEL AMS 6322, CADMIUM PLATED, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9938 NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK,
STEEL AMS 6322, CADMIUM PLATED, .5625-18 UNJF-3A (NO S/S DOCUMENT)
MS9941 NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A (NO S/S DOCUMENT)
MS9942 NOT 1 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .250-28 UNJF-3A (NO S/S DOCUMENT)
MS9943 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL
SHANK, SEEL AMS 6322, CADMIUM PLATED, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9944 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A (S/S BY SAE-AS9944)
MS9945 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9946 NOT 1 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9947 NOT 2 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED,
FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .5625-18 UNJF-3A (S/S BY SAE-AS9947)
MS9957 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A (NO S/S DOCUMENT)
MS9958 NOT 2 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .250-28UNJF-3A (S/S BY SAE-AS9958)
MS9959 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .3125-24 UNJF-3A (NO S/S DOCUMENT)
MS9960 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A (NO S/S DOCUMENT)
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
