〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
MS9961
NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS
6322, CADMIUM PLATED, .4375-20 UNJF-3A (NO S/S DOCUMENT)
MS9962 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .500-20 UNJF-3A (NO S/S DOCUMENT)
MS9963 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .5625-18UNJF-3A (NO S/S DOCUMENT)
MS9964 NOT 2 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .625-18UNJF-3A (S/S BY SAE-AS9964)
MS9965 NOT 1 BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL
AMS 6322, CADMIUM PLATED, .750-16UNJF-3A (NO S/S DOCUMENT)
NAS1303THRUNAS1320 BOLT, SHEAR, HEXAGON HEAD
NAS1579 BOLT, FLAT PAN HEAD, FULL THREAD
NAS1582 BOLT, 100 DEG. FLUSH TENSION HEAD FULL THREAD
NAS496 BOLTS - INTERNAL WRENCHING
NAS6603THRUNAS6620 BOLT, HEX HEAD, CLOSE TOLERANCE, ALLOY STEEL, LONG
THREAD, SELF LOCKING AND NONLOCKING
NAS663THRUNAS668 BOLT, 100 DEG FLUSH TENSION HEAD (HI-TORQUE) RECESS,
LONG THREAD TITANIUM ALLOY
QPL-23964-21 NOT 1 BOLT, SELF-RETAINING, POSITIVE LOCK (NO S/S DOCUMENT)
QPL-7838-37 NOT 1 BOLT, INTERNAL WRENCHING, 160 KSI FTU (NO S/S DOCUMENT)
QPL-7874-13 NOT 1 BOLT, MACHINE, 1200 DEG. F (NO S/S DOCUMENT)
QPL-83050-13 NOT 1 BOLT, SELF RETAINING, IMPEDANCE TYPE (NO S/S DOCUMENT)
QPL-85604-5 NOT 1 BOLT, NICKEL ALLOY 718, TENSION, HIGH STRENGTH, (125
KSI FSU AND 220 KSI FTU) HIGH TEMPERATURE, SPLINE DRIVE (NO S/S DOCUMENT)
QPL-85667-1 NOT 1 BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD,
GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-8831-35 NOT 1 BOLT, 180 KSI FTU AND 108 KSI FSU, 450 DEG. F PROTRUDING
AND FLUSH HEAD, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-8906-13 NOT 1 BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI FSU AND
220 KSI FTU, 450 DEG. F), SPLINE DRIVE, GENERAL SPECIFICATION FOR (NO
S/S DOCUMENT)
QPL-8907-11 NOT 1 BOLT, ALLOY STEEL, SHEAR AND TENSILE, 156 KSI FSU AND
260 KSI FTU, EXTERNAL WRENCHING, FLANGED HEAD (NO S/S DOCUMENT)
QPL-8961-7 NOT 1 FASTENER, EXTERNALLY THREADED, 450 DEG. F AND 1200 DEG.
F, SELF-LOCKING ELEMENT FOR (NO S/S DOCUMENT)
SAE-MA3477 BOLT, MACHINE - SPLINE DRIVE HD, CLOSE TOL FULL SHANK, AMS-5662,
METRIC (NO S/S DOCUMENT)
SAE-MA4147 BOLT, SPLINE DRIVE EXTENDED WASHER, REDUCED SHANK, AMS 5662,
METRIC (NO S/S DOCUMENT)
SAE-MA4187 BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED
HEAD, PD SHANK, AMS 5662, METRIC (NO S/S DOCUMENT)
SAE-MA4189 SCREW, MACHINE, 100 DEG. CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS,
FULL SHANK, UNS S66286, MJ THREAD, METRIC (NO S/S DOCUMENT)
ASME-B18.15 eyebolt ，伪造 EYEBOLT, FORGED
ASME-B18.5 轮头螺栓（英寸系列） ROUND HEAD BOLTS (INCH SERIES)
ASME-B18.5.2.2M 螺栓，方颈，圆头部，公制 BOLTS, SQUARE NECK, ROUND HEAD, METRIC
ASTM-A320/A320M 钢，合金，不锈钢和锚杆支护材料的低温服务 STEEL, ALLOY, AND STAINLESS STEEL
BOLTING MATERIALS FOR LOW-TEMPERATURE SERVICE
ASTM-A325 螺栓，钢铁，结构，热处理，一百零五分之一百二十ksi最小抗拉强度 BOLTS, STEEL, STRUCTURAL, HEAT
TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH
ASTM-A394 钢输电铁塔螺栓，锌涂层和裸 STEEL TRANSMISSION TOWER BOLTS, ZINC-COATED AND
BARE
ASTM-A453/A453M 材料，锚杆支护，高温度，膨胀系数相比，奥氏体不锈钢 MATERIALS, BOLTING, HIGH-TEMPERATURE,
WITH EXPANSION COEFFICIENTS COMPARABLE TO AUSTENITIC STAINLESS STEEL
ASTM-A489 碳钢解除眼睛 CARBON STEEL LIFTING EYES
ASTM-A490 螺栓，结构，合金钢，热处理， 150 ksi最小抗拉强度 BOLTS, STRUCTURAL, ALLOY STEEL,
HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH
ASTM-F541 eyebolts ，合金钢 EYEBOLTS, ALLOY STEEL
ASTM-F704 接头，法兰，选择锚杆支护长度为管道系统 JOINTS, FLANGED, SELECTING BOLTING LENGTHS
FOR PIPING SYSTEM
MIL-B-15382C(1) NOT 1 锚杆，锚耐火砖 BOLT, FIREBRICK ANCHOR
MIL-B-45912A(1) 螺栓，自锁，六角头，钢 BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL
MIL-B-85667A(2) SUP 1 螺栓，套筒，直小腿，伸出和冲洗头部，一般规格 BOLT, SLEEVE, STRAIGHT SHANK,
PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR
AN125951THRUAN126274 REV 2 NOT 2 STUD-STRAIGHT, .250-20 X .250-28
AN126275THRUAN126586 REV 2 NOT 3 STUD-STRAIGHT, .3125-18 X .3125-24 (S/S
BY SAE-AS126275THRUAS126586)
AN126587THRUAN126652 REV 2 NOT 1 STUD AND STRAIGHT, .375&16 X .375&24
(S/S BY SAE-AS126587THRUAS126652)
AN126653THRUAN126712 REV 3 NOT 1 STUD-STRAIGHT, .4375-14 X .4375-20
AN126713THRUAN126766 REV 3 NOT 1 STUD STRAIGHT, .500-13 X .500-20
AN126767THRUAN126820 REV 3 NOT 2 STUD - STRAIGHT, .5625-12 X .5625-18
AN126821THRUAN126880 REV 3 NOT 1 STUD-STRAIGHT, .625-11 X .625-18
AN126881THRUAN127192 REV 2 NOT 2 STUD & STRAIGHT, NECKED, .375&16
X .375&24 (S/S BY SAE-AS126881THRUAS127192)
AN127193THRUAN127492 REV 2 NOT 2 STUD - STRAIGHT, NECKED, .4375-14 X .4375-20
(S/S BY SAE-AS127193THRUAS127492)
AN127493THRUAN127786 REV 3 NOT 1 STUD STRAIGHT, NECKED, .500-13 X .500-20
AN127787THRUAN128086 REV 3 NOT 1 STUD-STRAIGHT, NECKED, .5625-12 X .5625-18
AN128087THRUAN128362 REV 3 NOT 1 STUD STRAIGHT, NECKED, .625-11 X .625-18
AN128363THRUAN128686 REV 2 NOT 2 STUD AND STRAIGHT, DRILLED, .250-20 X
.250-28 (S/S BY SAE-AS128363THRUAS128686)
AN128687THRUAN128998 REV 2 NOT 2 STUD - STRAIGHT, DRILLED, .3125-18 X
.3125-24 (S/S BY SAE-AS128687THRUAS128998)
AN128999THRUAN129064 REV 3 NOT 1 STUD, STRAIGHT, DRILLED, .375-16 X .375-24
AN129065THRUAN129124 REV 3 NOT 1 STUD-STRAIGHT, DRILLED, .4375-14 X .4375-20
AN129125THRUAN129178 REV 3 NOT 1 STUD-STRAIGHT, DRILLED, .500-13 X .500-20
AN129179THRUAN129232 REV 3 NOT 1 STUD STRAIGHT, DRILLED, .5625-12 X .5625-18
AN129233THRUAN129292 REV 3 NOT 2 STUD-STRAIGHT, DRILLED, .625-11 X .625-18
AN129293THRUAN129604 REV 2 NOT 1 STUD AND STRAIGHT, DRILLED, NECKED, .375-16
X .375-24 (S/S BY SAE-AS129293THRUAS129604)
AN129605THRUAN129904 REV 3 NOT 1 STUD STRAIGHT, DRILLED, NECKED, .4375-14
X .4375-20
AN129905THRUAN130198 REV 3 NOT 1 STUD-STRAIGHT, DRILLED, NECKED, .500-13
X .500-20
AN130199THRUAN130498 REV 3 NOT 1 STUD STRAIGHT, DRILLED, NECKED, .5625-12
X .5625-18
AN130499THRUAN130774 REV 3 NOT 1 STUD-STRAIGHT, DRILLED, NECKED, .625-11
X .625-18
AN150501THRUAN150800 REV 3 NOT 3 STUD, STEPPED, 1.5 DIA ENGAGEMENT, .250-20
X .190-32 (S/S BY SAE-AS150501THRUAN150800)
AN150801THRUAN151100 REV 2 NOT 2 STUD, STEPPED, 1.5 DIA ENGAGEMENT, .3125-18
X .250-28 (S/S BY SAE-AS150801THRUAS151100)
AN151101THRUAN151400 REV 2 STUD-STEPPED, 1.5 DIA ENGAGEMENT, .375-16 X
.3125-24 (NO S/S DOCUMENT)
AN151401THRUAN151700 REV 2 NOT 2 STUD, STEPPED, 1.5 DIA ENGAGEMENT, .4375-14
X .375-24 (S/S BY SAE-AS151401THRUAS151700)
AN151701THRUAN152000 REV 4 NOT 1 STUD-STEPPED, 1.5 DIA ENGAGEMENT, .500-13
X .4375-20 (S/S BY SAE-AS151701THRUAS152000)
AN152001THRUAN152300 REV 4 STUD STEPPED, 1.5 DIA. ENGAGEMENT, .5625-12
X .500-20 (NO S/S DOCUMENT)
AN152301THRUAN152600 REV 3 STUD-STEPPED, 1.5 DIA ENGAGEMENT, .625-11 X
.5625-18 (NO S/S DOCUMENT)
AN152601THRUAN152900 REV 3 NOT 2 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT,
.250-20 X .190-32 (S/S BY SAE-AS152601THRUAS152900)
AN152901THRUAN153200 REV 2 NOT 1 STUD & STEPPED, DRILLED, 1.5 DIA
ENGAGEMENT, .3125&18 X .250&28 (S/S BY SAE-AS152901THRUAS153200)
AN153201THRUAN153500 REV 5 NOT 1 STUD, STEPPED DRILLED, 1.5 DIA ENGAGEMENT,
.375-16 X .3125-24 (S/S BY SAE-AS153201THRUAS153500)
AN153501THRUAN153800 REV 4 STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT,
.4375-14 X .375-24 (NO S/S DOCUMENT)
AN153801THRUAN154100 REV 4 STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT,
.500-13 X .4375-20 (NO S/S DOCUMENT)
AN154101THRUAN154400 REV 4 STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT,
.5625-12 X .500-20 (NO S/S DOCUMENT)
AN154401THRUAN154700 REV 4 NOT 2 STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT,
.625-11 X .5625-18
AN154701THRUAN155000 REV 2 NOT 2 STUD STEPPED, 2 DIA ENGAGEMENT, .250-20
X .190-32 (S/S BY SAE-AS154701THRUAS155000)
AN155001THRUAN155300 REV 3 NOT 2 STUD, STEPPED, 2 DIA ENGAGEMENT, .3125-18
X .250-28 (S/S BY SAE-AS155001THRUAS155300)
AN155301THRUAN155600 REV 2 NOT 2 STUD, STEPPED, 2 DIA ENGAGEMENT, .375-16
X .3125-24 (S/S BY SAE-AS155301THRUAS155600)
AN155601THRUAN155900 REV 4 STUD-STEPPED, 2 DIA ENGAGEMENT, .4375-14 X
.375-24 (NO S/S DOCUMENT)
AN155901THRUAN156200 REV 4 NOT 1 STUD STEPPED, 2 DIA ENGAGEMENT, .500-13
X .4375-20 (S/S BY SAE-AS155901THRUSAE-AS156200)
AN156201THRUAN156500 REV 4 STUD-STEPPED, 2 DIA ENGAGEMENT, .5625-12 X
.500-20 (NO S/S DOCUMENT)
AN156501THRUAN156800 REV 4 STUD STEPPED, 2 DIA. ENGAGEMENT, .625-11 X
.5625-18 (NO S/S DOCUMENT)
AN156801THRUAN157100 REV 3 NOT 1 STUD, STEPPED, DRILLED, 2 DIA ENGAGEMENT,
.250-20 X .190-32 (NO S/S DOCUMENT)
AN157101THRUAN157400 REV 4 STUD-STEPPED, DRILLED, 2 DIA ENGAGEMENT, .3125-18
X .250-28 (NO S/S DOCUMENT)
AN157401THRUAN157700 REV 4 STUD STEPPED, DRILLED, 2 DIA. ENGAGEMENT, .375-16
X .3125-24 (NO S/S DOCUMENT)
AN157701THRUAN158000 REV 4 STUD-STEPPED, DRILLED, 2 DIA ENGAGEMENT, .4375-14
X .375-24 (NO S/S DOCUMENT)
AN158001THRUAN158300 REV 4 STUD STEPPED, DRILLED, 2 DIA. ENGAGEMENT, .500-13
X .4375-20 (NO S/S DOCUMENT)
AN158301THRUAN158600 REV 4 STUD-STEPPED, DRILLED, 2 DIA ENGAGEMENT, .5625-12X
.500-20 (NO S/S DOCUMENT)
AN158601THRUAN158900 REV 4 STUD, STEPPED, DRILLED, 2 DIA. ENGAGEMENT,
.625-11 X .5625-18 (NO S/S DOCUMENT)
AN158901 STUD & STEPPED, NECKED, 1.5 DIA ENGAGEMENT, .4375&14
X .375&24
AN158901THRUAN159200 REV 3 NOT 1 STUD-STEPPED, NECKED, 1.5 DIA ENGAGEMENT
.4375-14 X .375-24 (S/S BY SAE-AS158901THRUAS159200)
AN159201THRUAN159500 REV 3 STUD-STEPPED, NECKED, 1.5 DIA ENGAGEMENT, .500-13
X 4375-20 (NO S/S DOCUMENT)
AN159501THRUAN159800 REV 3 STUD STEPPED, NECKED, 1.5 DIA. ENGAGEMENT,
.5625-12 X .500-20 (NO S/S DOCUMENT)
AN159801THRUAN160100 REV 3 STUD-STEPPED, NECKED, 1.5 DIA ENGAGEMENT, .625-11
X .5625-18 (NO S/S DOCUMENT)
AN160101THRUAN160400 REV 3 STUD STEPPED, DRILLED, NECKED, 1.5 DIA. ENGAGEMENT,
.4375-14 X .375-24 (NO S/S DOCUMENT)
AN160401THRUAN160700 REV 2 NOT 1 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA
ENGAGEMENT, .500-13 X .4375-20
AN160701THRUAN161000 REV 3 NOT 1 STUD STEPPED, DRILLED, NECKED, 1.5 DIA.
ENGAGEMENT, .5625-12 X .500-20
AN161001THRUAN161300 REV 3 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT,
.625-11 X .5625-18
AN161301THRUAN161600 REV 3 STUD STEPPED, NECKED, 2 DIA. ENGAGEMENT, .4375-14
X .375-24
AN161601THRUAN161900 REV 3 STUD-STEPPED, NECKED, 2 DIA ENGAGEMENT, .500-13
X .4375-20
AN161901THRUAN162200 REV 3 STUD STEPPED, NECKED, 2 DIA. ENGAGEMENT, .5625-12
X .500-20
AN162201THRUAN162500 REV 3 NOT 1 STUD-STEPPED, NECKED, 2 DIA ENGAGEMENT,
.625-11 X .5625-18
AN162501THRUAN162800 REV 2 NOT 2 STUD & STEPPED, DRILLED, NECKED,
2 DIA ENGAGEMENT, .4375&14 X .37 (S/S BY SAE-AS162501THRUAS162800)
AN162801THRUAN163100 REV 3 STUD STEPPED, DRILLED, NECKED, 2 DIA. ENGAGEMENT,
.500-13 X .4375-20
AN163101THRUAN163400 REV 3 NOT 1 STUD-STEPPED, DRILLED, NECKED, 2 DIA
ENGAGEMENT, .5625-12 X .500-20
AN163401THRUAN163700 REV 3 STUD STEPPED, DRILLED, NECKED, 2 DIA. ENGAGEMENT,
.625-11 X .5625-18
AN163701THRUAN164000 REV 3 NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18
X .250-28
AN164001THRUAN164300 REV 3 STUD STEPPED, NECKED, WRENCH PAD, 1.5 DIA.
ENGAGEMENT, .375-16 X .3125-24
AN164301THRUAN164600 REV 3 STUD-STEPPED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT,
.4375-14 X .375-24 (NO S/S DOCUMENT)
AN164601THRUAN164900 REV 3 NOT 1 STUD STEPPED, NECKED, WRENCH PAD, 1.5
DIA. ENLARGEMENT, .500-13 X .4375-20
AN164901THRUAN165200 REV 3 NOT 1 STUD-STEPPED, NECKED, WRENCH PAD, 1.5
DIA ENGAGEMENT, .5625-12 X .500-20
AN165201THRUAN165500 REV 3 STUD STEPPED, NECKED, WRENCH PAD, 1.5 DIA.
ENGAGEMENT, .625-11 X .5625-18 (NO S/S DOCUMENT)
AN165501THRUAN165800 REV 3 NOT 1 STUD-STEPPED, DRILLED, NECKED, WRENCH
PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
AN165801THRUAN166100 REV 3 NOT 1 STUD STEPPED, DRILLED, NECKED, WRENCH
PAD 1.5 DIA. ENGAGEMENT, .375-16 X .3125-24 (NO S/S DOCUMENT)
AN166101THRUAN166400 REV 3 NOT 1 STUD-STEPPED, DRILLED, NECKED, WRENCH
PAD, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
AN166401THRUAN166700 REV 3 NOT 1 STUD STEPPED, DRILLED, NECKED, WRENCH
PAD, 1.5 DIA. ENGAGEMENT, .500-13 X .4375-20
AN166701THRUAN167000 REV 3 NOT 1 STUD STEPPED, DRILLED, NECKED, WRENCH
PAD, 1.5 DIA. ENGAGEMENT, .5625-12 X .500-20 (NO S/S DOCUMENT)
AN167001THRUAN167300 REV 3 STUD STEPPED, DRILLED, NECKED, WRENCH PAD,
1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (NO S/S DOCUMENT)
AN167301THRUAN167600 REV 3 STUD-STEPPED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT,
.3125-18 AN 167600-REV (NO S/S DOCUMENT)
AN167601THRUAN167900 REV 3 STUD-STEPPED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT,
.375-16 X .3125-24 (NO S/S DOCUMENT)
AN167901THRUAN168200 REV 3 NOT 1 STUD-STEPPED, NECKED, WRENCH PAD, 2 DIA
ENGAGEMENT, .4375-14 X .375-24
AN168201THRUAN168500 REV 3 STUD STEPPED, NECKED, WRENCH PAD, 2 DIA. ENGAGEMENT,
.500-13 X .4375-20 (NO S/S DOCUMENT)
AN168501THRUAN168800 REV 3 NOT 1 STUD-STEPPED, NECKED, WRENCH PAD, 2 DIA
ENGAGEMENT, 15625-12 X .500-20
AN168801THRUAN169100 REV 3 STUD-STEPPED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT,
.625-11 X .5625-18 (NO S/S DOCUMENT)
AN169101THRUAN169400 REV 3 STUD STEPPED, DRILLED, NECKED, WRENCH PAD,
2 DIA. ENGAGEMENT, .3125-18 X .250-28 (NO S/S DOCUMENT)
AN169401THRUAN169700 REV 3 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD,
2 DIA ENGAGEMENT, .375-16 X .3125-24 (NO S/S DOCUMENT)
AN169701THRUAN170000 REV 3 STUD STEPPED, DRILLED, NECKED, WRENCH PAD,
2 DIA. ENGAGEMENT, .4375-14 X .375-24 (NO S/S DOCUMENT)
AN170001THRUAN170300 REV 3 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD,
2 DIA ENGAGEMENT, .500-13 X .4375-20 (NO S/S DOCUMENT)
AN170301THRUAN170600 REV 2 NOT 1 STUD-STEPPED, DRILLED, NECKED, WRENCH
PAD, 2 DIA ENGAGEMENT, .5625-12 X .5000-20
AN170601THRUAN170900 REV 3 STUD AND STEPPED, DRILLED, NECKED, WRENCH PAD,
2 DIA ENGAGEMENT, .625-11 X .5625-18 (NO S/S DOCUMENT)
DOD-S-63275/1A NOT 2 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED,
METRIC
DOD-S-63275A(1) NOT 1 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED,
METRIC AND RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR
DOD-S-63543 NOT 1 STUD AND ROD, THREADED, METRIC, GENERAL SPECIFICATION
FOR (NO S/S DOCUMENT)
DOD-S-63543/1(1) NOT 1 STUD, PLAIN, METRIC (1.25 DIA. AND 2 DIA. ENLARGEMENT
(NO S/S DOCUMENT)
DOD-S-63543/2(1) NOT 1 ROD, CONTINUOUS THREAD, METRIC (NO S/S DOCUMENT)
DOD-S-63543/3(1) NOT 1 STUD, CONTINUOUS THREAD, METRIC (NO S/S DOCUMENT)
MIL-S-18109E STUDS, WELDING, AND FERRULES (ARC SHIELDS), WELDING STUD
(S/S BY MIL-S-24149/6)
MIL-S-18247A STUD, PLAIN, STEEL, GENERAL - PURPOSE (FF-S-1362)
MIL-S-19757(2) STUDS, WELDING, AND FERRULES, WELDING STUD -- CORROSION-RESISTING
STEEL (USE MIL-S-24149/3
MIL-S-45909C SUP 1 NOT 1 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL
SPECIFICATION FOR (S/S BY NASM45909)
MIL-S-45915A NOT 1 STUD, LOCKED IN - KEY LOCKED, GENERAL SPECIFICATION
FOR (S/S BY NASM45915)
MIL-S-45933 SUP 1 NOT 1 STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL
SPECIFICATION FOR (NO S/S DOCUMENT)
MIL-S-45933/1A NOT 1 STUD, KEYRING LOCKED, 125 KSI FTU, SINGLE STEP (NO
S/S DOCUMENT)
MIL-S-45933/2A NOT 1 STUD, KEYRING LOCKED, 160 KSI FTU, MULTIPLE STEP
(NO S/S DOCUMENT)
MIL-S-45933/3A NOT 1 STUD, KEYRING LOCKED, HOLE DIMENSIONS FOR AND ASSEMBLY
OF (NO S/S DOCUMENT)
MIL-S-63540/1A(3) NOT 1 STUD, SELF-LOCKING, FLUSH HEAD, RIBBED CLINCH
TYPE (S/S BY NASM63540/1)
MIL-S-63540/2 NOT 2 STUD, SELF-LOCKING, FLUSH AND PROTRUDING HEAD (S/S
BY NASM63540/2)
MIL-S-63540/3A NOT 1 STUD, SELF-CLINCHING, FLUSH HEAD, HEX CLINCH TYPE
(S/S BY NASM63540/3)
MIL-S-63540/4(1) NOT 1 STUD, SELF-LOCKING, CONCEALED HEAD, KNURLED CLINCH
TYPE (S/S BY NASM63540/4)
MIL-S-63540/5 NOT 1 STUD, SELF-LOCKING, CONCEALED HEAD, HEX CLINCH TYPE
(S/S BY NASM63540/5)
MIL-S-63540/6 NOT 1 STUD, SELF-LOCKING, NON-FLUSH, RIBBED CLINCH TYPE
MIL-S-63540/7 NOT 1 STUD, SELF-LOCKING, BROACHING TYPE (S/S BY NASM63540/7)
MIL-S-63540C NOT 3 STUD, SELF-CLINCHING, GENERAL SPECIFICATION FOR (S/S
BY NASM63540)
MIL-STD-1598 NOT 1 STUDS PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
MS15824B STUDS,(BOLT-STUDS), CONTINUOUS THREAD, B7A AND B14 ALLOY STEEL,
HIGH TEMPERATURE SERVICE, 875 F, MAXIMUM (S/S MS16187)
MS15986 STUD, PLAIN, STEEL, FULL BODY, GENERAL PURPOSE (USE MS51864)
MS15987 STUD, PLAIN, BRASS, FULL BODY, GENERAL PURPOSE (USE MS51864)
MS15988 STUD, PLAIN, NICKEL COPPER ALLOY, FULL BODY, GENERAL PURPOSE
MS15989A STUD, PLAIN, STEEL, REDUCED BODY, GENERAL PURPOSE (USE MS51864)
MS15990 STUD, PLAIN, BRASS, REDUCED BODY, GENERAL PURPOSE (USE MS51864)
MS15991 STUD, PLAIN, NICKEL COPPER ALLOY, REDUCED BODY, GENERAL PURPOSE
(USE MS51864)
MS16187B NOT 1 STUD, CONTINOUS THREAD (BOLT-STUD), B16 ALLOY STEEL HIGH
TEMPERATURE SERVICE (875 D EG-1000 DEG F) (S/S BY NASM16187)
MS17293 NOT 1 STUD-STEPPED, 1.5 DIA ENGAGEMENT, 0.250-20 X 0.190-32 (NO
S/S DOCUMENT)
MS17294(1) NOT 1 STUD-STEPPED, 1.5 DIA ENGAGEMENT, .3125-18 X 250-28 (MIL-S-8879
THREAD)
MS17295(1) NOT 1 STUD STEPPED, 1.5 DIA ENGAGEMENT, .375-16 X .3125-24
(MIL-S-8879 THREAD)
MS17296(1) NOT 1 STUD-STEPPED, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
(MIL-S-8879 THREAD)
MS17297 NOT 1 STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
(MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS17298 NOT 1 STUD-STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, 0.375-16 X 0.3125-24
(MIL-S-8879 THREAD) (NO S/S DOCUMENT)
MS17299(1) NOT 1 STUD-STRAIGHT .190-24 X .190-32 (MIL-S-8879 THREAD)
MS17300(1) NOT 1 STUD-STRAIGHT, .250-20 X .250-28 (MIL-S-8879 THREAD)
MS17301(1) NOT 1 STUD-STRAIGHT, .3125-18X .3125-24 (MIL-S-8879 THREAD)
MS17302 NOT 1 STUD-STRAIGHT, DRILLED, .250-20 X .250-28 (MIL-S-8879 THREAD)
(NO S/S DOCUMENT)
MS17303 NOT 1 STUD-STRAIGHT, DRILLED, .3125-18 X .3125-24 (MIL-S-8879
THREAD) (NO S/S DOCUMENT)
MS27951A NOT 2 STUB (STUD), WELDING-TURNBUCKLE (GENERAL PURPOSE, MANUAL
WELD APPLICATION)
MS51497 NOT 1 STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE
REPLACER
MS51551 NOT 1 STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT
END, INCREASED STUD END LENGTH
MS51833E(1) NOT 1 STUD, LOCKED IN, KEY-LOCKED, LIGHTWEIGHT (S/S BY NASM51833)
MS51834E(1) NOT 1 STUD, LOCKED IN, KEY-LOCKED, HEAVY DUTY (S/S BY NASM51834)
MS51864(1) NOT 2 STUD-PLAIN, GENERAL PURPOSE (S/S BY NASM51864)
MS51950C NOT 1 STUD, SHOULDERED: WHEEL MOUNTING
MS51951C NOT 1 STUD, SHOULDERED AND STEPPED: WHEEL MOUNTING
MS51989A(1) NOT 2 STUD, LOCKED IN-RING LOCKED, SERRATED (S/S BY SAE-AS51989)
MS51992B(1) NOT 1 STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH
(S/S BY SAE-AS51992)
MS52122B STUD, SHOULDERED AND STEPPED. WHEEL MOUNTING (NO S/S DOCUMENT)
MS9303B NOT 1 STUD, SHOULDERED, HEXAGON WRENCHING, STEEL, .190-32 NF-3A
X.190-32 NF-3A (S/S BY SAE-AS9303)
MS9304B NOT 2 STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL,
.190-32 NF-3A X .250-28 UNF-3A (S/S BY SAE-AS9304)
MS9305B NOT 2 STUD, SHOULDERED, HEXAGON WRENCHING, STEEL, .250-28 UNF-3A
X .250-28 UNF-3A (S/S BY SAE-AS9305)
MS9306B NOT 2 STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, STEEL,
.250-28 UNF-3A X .3125-24 UNF-3A (S/S BY SAE-AS9306)
MS9307B NOT 1 STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, STEEL,
.250-28 UNF-3A X .375-24 UNF-3A (S/S BY SAE-AS9307)
MS9308B NOT 1 STUD, SHOULDERED, HEXAGON WRENCHING, DRILLED, STEEL, .190-32
NF-3A X .190-32 NF-3A (S/S BY SAE-AS9308)
MS9309B NOT 1 STUD, SHOULDERING & STEPPED, HEXAGON WRENCHING, DRILLED,
STEEL, .190-32 UNF-3A X .250-28 UNF-3A (S/S BY SAE-AS9309)
MS9310B NOT 1 STUD, SHOULDERED, HEXAGON WRENCHING, DRILLED, STEEL, .250-28
UNF-3A X .250-28 UNF-3A (S/S BY SAE-AS9310)
MS9311B NOT 1 STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, DRILLED,
STEEL, .250-28 UNF-3A X .3125-24 UNF-3A (S/S BY SAE-AS9311)
MS9312B NOT 1 STUD, SHOULDERED & STEPPED, HEXAGON WRENCHING, DRILLED,
STEEL, .250-28 UNF-3A X .375-24 UNF-3A (S/S BY SAE-AS9312)
MS9827 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.250-20 UNJS X 0.190-32
UNJF (NO S/S DOCUMENT)
MS9828 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL 0.3125-18 UNJS X 0.250-28
UNJF (NO S/S DOCUMENT)
MS9829 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.375-16 UNJS X 0.3125-24
UNJF (NO S/S DOCUMENT)
MS9830 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.4375-14 UNJS X
0.375-24 UNJF (NO S/S DOCUMENT)
MS9831 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.500-13 UNJS X 0.4375-20
UNJF (NO S/S DOCUMENT)
MS9832 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.5625-12 UNJS X
0.500-20 UNJF (NO S/S DOCUMENT)
MS9833 NOT 1 STUD-STEPPED, 2 DIA. ENGAGEMENT, STEEL, 0.625-11 UNJS X 0.5625-18
UNJF (NO S/S DOCUMENT)
MS9834 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT STEEL, 0.250-20 UNJS X
0.190-32 UNJF (NO S/S DOCUMENT)
MS9835 NOT 1 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.3125-18
UNJS X 0.250-28 UNJF (NO S/S DOCUMENT)
MS9836 NOT 1 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.375-16
UNJS X 0.3125-24 UNJF (NO S/S DOCUMENT)
MS9837 NOT 1 STUD-STEPPED, DRILLED, 2 D1A ENGAGEMENT STEEL, .4375-14 UNJS
X .375-24 UNJF (NO S/S DOCUMENT)
MS9838 NOT 1 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.500-13
UNJS X 0.4375-20 UNJF (NO S/S DOCUMENT)
MS9839 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.5625-12 UNJS
X 0.500-20 UNJF (NO S/S DOCUMENT)
MS9840 NOT 1 STUD-STEPPED, DRILLED, 2 DIA. ENGAGEMENT, STEEL, 0.625-11
UNJS X 0.5625-18 UNJF (NO S/S DOCUMENT)
NASM24149 STUDS, WELDING, AND ARC SHIELDS (FERRULES) (NO S/S DOCUMENT)
NASM24149-1 STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1,
2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY
ARC WELDING (NO S/S DOCUMENT)
NASM24149-2 STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE III, CLASS
1, 2, 3, AND TYPE IV, CLASS 1, 2, 3, 4, 5, 6, ALUMINUM ALLOY, FOR DIRECT
ENERGY ARC WELDING (NO S/S DOCUMENT)
NASM24149-3 STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE V, CLASS
1, 4, 5, 5A, CORROSION-RESISTANT STEEL, FOR DIRECT ENERGY ARC WELDING
(NO S/S DOCUMENT)
NASM24149-4 STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR
STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)
NASM24149-5 STUDS, WELDING, TYPE VII, CLASS 1, 2, 3, ALUMINUM ALLOY, FOR
STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)
NASM24149-6 STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION-RESISTANT
STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (NO S/S DOCUMENT)
FF-S-1362 种，平原，一般用途 STUD, PLAIN, GENERAL PURPOSE
MIL-DTL-24287D 钉;锚钉;螺栓;坚果;合金钢（服务700华氏度六） STUDS; BOLT-STUDS; BOLTS; NUTS;
ALLOY STEEL (FOR SERVICE TO 700 DEG F)
MIL-DTL-24354F 种;螺栓种;坚果; capscrews耐腐蚀和非铁材料 STUD; BOLT-STUD; NUTS; CAPSCREWS
CORROSION-RESISTANT AND NON-FERROUS MATERIALS
A-A-55607 NOT 1 WASHER, LOCK, FLAT, EXTERNAL TOOTH, NONMAGNETIC (S/S BY
MS16213)
A-A-55608 NOT 1 WASHER, FINISHING-COUNTERSUNK (S/S BY MS27129)
A-A-55609 NOT 1 WASHER, LOCK, FLAT-INTERNAL TOOTH (S/S BY MS35333)
A-A-55610A NOT 1 WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES
(S/S BY MS35338)
A-A-55611 NOT 1 WASHER, LOCK, INTERNAL AND EXTERNAL TOOTH (S/S BY MS45904)
A-A-55612 NOT 1 WASHER, LOCK-HELICAL SPRING, HI-COLLAR (S/S BY MS51848)
AN121501THRUAN121525 REV 2 NOT 2 NUT AND PLAIN (S/S BY SAE-AS121501THRUAN121525)
AN121526THRUAN121550 REV 2 NOT 1 NUT, PLAIN, CORROSION RESISTANT STEEL
AN121551THRUAN121575 REV 2 NOT 2 NUT, PLAIN, CASTELLATED HEXAGON
AN121576THRUAN121600 REV 2 NUT-CASTLE, CORROSION RESISTANT STEEL (USE
MS-9358)
AN122576THRUAN122600 REV 2 WASHER-PLAIN, STEEL (USE MS9320)
AN150401THRUAN150425 REV 1 NOT 1 NUT-HEX, CHECK (S/S BY SAE-AS150401THRUAS150425)
AN150426THRUAN150450 REV 1 NOT 1 NUT-HEX, CHECK (S/S BY SAE-AS150426THRUAS150450)
AN256 REV 5 NOT 2 NUT - SELF LOCKING, PLATE, RIGHT ANGLE, 250 DEG. F (S/S
BY NASM256)
AN310 REV 10 NOT 2 NUT, PLAIN, CASTELLATED, AIRFRAME (S/S BY NASM310)
AN315 REV 10 NOT 2 NUT, PLAIN, AIRFRAME (S/S BY NASM315)
AN316 REV 11 NOT 1 NUT, JAM, HEXAGON (S/S BY NASM316)
AN320 REV 14 NOT 1 NUT, PLAIN, CASTELLATED, SHEAR (S/S BY NASM320)
AN325 REV 10 NUT & PLAIN HEX (FINE THD)
AN335 NUT - PLAIN HEX. (COARSE THREAD)
AN340 REV 5 NOT 1 NUT, PLAIN, HEXAGON, NON-STRUCTURAL, COARSE THREAD
AN341 NUT, PLAIN, HEXAGON, ELECTRICAL (USE MS35649 OR MS35650)
AN345 REV 6 NOT 1 NUT, PLAIN, HEXAGON, NON-STRUCTURAL, FINE THREAD
AN350 REV 5 NOT 1 NUT, PLAIN, WING (S/S BY MS35425 AND MS35426)
AN355 NUT- ENGINE, SLOTTED ( USE AN 310)
AN356 REV 8 LOCK - NUT
AN361 NUT - SELF LOCKING, PLATE, COUNTERSUNK 100 DEG., 550 DEG. F (USE
MS-21049 OR MS-21050)
AN362 REV 6 NOT 1 NUT, SELF-LOCKING, PLATE, NON-COUNTERSUNK, 550 DEG.
F (S/S BY MS21047 AND MS21048)
AN363 REV 4 NOT 1 NUT, SELF-LOCKING, 550 DEG F
AN364 REV 4 NOT 1 NUT-SELF LOCKING, THIN, 250 DEG. F (S/S BY MS21042,
MS21083, OR MS21245)
AN366 REV 6 NOT 1 NUT-PLATE, COUNTERSUNK 82 DEG. (S/S BY MS21047, MS21048,
OR MS21078)
AN367 REV 2 NOT 1 NUT-PLATE, COUNTERSUNK, 82 DEG.
AN373 REV 4 NOT 1 NUT - SELF LOCKING, PLATE, COUNTERSUNK 100 DEG., 250
DEG. F (S/S BY MS21049)
AN5001 REV 3 NUT - PROPELLER HUB CLAMPING RING (NO S/S DOCUMENT)
AN5001 REV 3 NUT - PROPELLER HUB CLAMPING RING (NO S/S DOCUMENT)
AN8013 WASHER & VIBRATION INSULATOR STOP
AN924 REV 11 NOT 2 NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING (S/S BY SAE-AS5178)
AN935 REV 5 WASHER - LOCK, SPRING (S/S BY MS35338)
AN936 REV 7 WASHER, TOOTH LOCK
AN940 WASHER - BURR (USE AN-960)
AN945 REV 5 WASHER&PLAIN, COMMERCIAL STANDARD (SEE MS15795)
AN960 REV 21 WASHER, FLAT
AN961 REV 2 NOT 1 WASHER - FLAT, ELECTRICAL (S/S BY NASM961)
AN970 REV 6 NOT 4 WASHER, FLAT (S/S BY NASM970)
AN975 REV 3 NOT 1 WASHER & TAPER PIN
AND10068 REV 4 NUTS AND PLATE NUTS - SELF LOCKING, FUNCTIONAL LIMITATIONS
OF (S/S BY MS33588)
ANSI-B18.2.4.1M METRIC HEX NUTS, STYLE 1 (W/ERRATA) (NO S/S DOCUMENT)
ANSI-B18.2.4.3M NUT, SLOTTED, HEX METRIC W/DOD EXCEPTIONS W/ERRATA (NO
S/S DOCUMENT)
ANSI-B18.2.4.4M NUT, FLANGE, HEX METRIC (NO S/S DOCUMENT)
ANSI-B18.2.4.5M NUT, JAM, HEX - METRIC - W/ERRATA (NO S/S DOCUMENT)
ANSI-B18.2.4.6M NUT, HEAVY HEX - METRIC- W/ERRATA (NO S/S DOCUMENT)
ANSI-B18.22M WASHER, FLAT, PLAIN - METRIC (W/ERRATA) (NO S/S DOCUMENT)
DOD-N-63476 NOT 2 NUT, PLAIN, WELDING, GENERAL SPECIFICATION FOR, METRIC
DOD-N-63476/1 NOT 3 NUT, PLAIN, WELDING, METRIC
DOD-N-63548 NOT 1 NUT, PLAIN, HEXAGON, WHEEL MOUNTING, METRIC, GENERAL
SPECIFICATION FOR
DOD-N-63548/1 NOT 3 NUT, PLAIN, HEXAGON, CONE SEAT, WHEEL MOUNTING, METRIC
DOD-N-70329 NOT 2 NUT, PLAIN, ROUND, BALL AND ROLLER BEARING, METRIC
DOD-N-70329/1 NOT 3 NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, NARROW
SERIES, METRIC
DOD-N-70333 NOT 1 NUT, PLAIN AND SELF-LOCKING, CLINCH, METRIC (SELF-CLINCHING,
KNURLED COLLAR) FIXED AND FLOATING
DOD-N-70333/1 NOT 1 NUT, PLAIN AND SELF-LOCKING, CLINCH, FIXED, METRIC
(SELF CLINCHING, KNURLED COLLAR)
DOD-N-70333/2 NOT 1 NUT, PLAIN AND SELF-LOCKING, CLINCH, FLOATING, METRIC
(SELF CLINCHING, KNURLED COLLAR)
DOD-W-63474/1A NOT 3 WASHERS, SPRING TENSION, CYLINDRICALLY CURVED AND
WAVED, METRIC
DOD-W-63474/2B NOT 2 WASHER, SPRING TENSION, (BELLEVILLE SPRING), METRIC
DOD-W-63474/3 NOT 1 WASHER, SPRING TENSION, SERRATED (RIBBED) (BELLEVILLE
SPRING), METRIC
DOD-W-63474/4 NOT 1 WASHER, SPRING TENSION, CURVED OR CRINKLE TYPE, (HIGH
COMPRESSION), METRIC (NO S/S DOCUMENT)
DOD-W-63474B NOT 1 WASHERS, SPRING TENSION, METRIC, GENERAL SPECIFICATION
FOR
DOD-W-63546/1 NOT 3 WASHER, KEY, FLAT, LONG, STEEL, METRIC
DOD-W-63546/2 NOT 3 WASHER, KEY, FLAT, LONG, BRASS, METRIC
DOD-W-63546/3 NOT 3 WASHER, KEY, FLAT, LONG AND SHORT, STEEL, METRIC
DOD-W-63546/4 NOT 3 WASHER, KEY, FLAT, LONG AND SHORT, BRASS, METRIC
DOD-W-63546/5 NOT 3 WASHER, KEY, EXTERNAL, STEEL, METRIC
DOD-W-63546/6 NOT 3 WASHER, KEY, EXTERNAL, BRASS, METRIC
DOD-W-63546/7 NOT 2 WASHER, KEY, INTERNAL, STEEL, METRIC
DOD-W-63546/8(1) NOT 1 WASHER, CONCAVE AND WASHER CONVEX (SPHERICAL SET),
STEEL, METRIC
DOD-W-63546A(1) SUP 1A NOT 1 WASHER, KEY, METRIC GENERAL SPECIFICATION
FOR
DOD-W-70336(1) NOT 1 WASHERS, (METRIC), GENERAL SPECIFICATION FOR
DOD-W-70336/1(1) NOT 1 WASHER, LOCK SPRING, HELICAL, REGULAR SERIES, (METRIC)
DOD-W-70336/2 NOT 1 WASHER, LOCK SPRING, HELICAL, LIGHT SERIES (METRIC)
(NO S/S DOCUMENT)
DOD-W-70336/3(1) NOT 1 WASHER, LOCK FLAT, INTERNAL TOOTH (METRIC)
DOD-W-70336/4(1) NOT 1 WASHER, LOCK, FLAT, EXTERNAL TOOTH (METRIC)
DS51402 NOT 2 NUT, PLAIN, WING, METRIC
FF-W-100C(1) NOT 1 WASHER, LOCK (TOOTH)
FF-W-84A(4) NOT 1 WASHERS, LOCK (SPRING)
FF-W-92B(1) NOT 1 WASHER, FLAT (PLAIN)
MIL-B-2677 BOLTS AND CLIPS (ALLOY-STEEL) AND NUTS (CARBON-STEEL), HOLDING-DOWN
(FOR ORDNANCE MOUNTS)
MIL-B-70332/4 NOT 1 WASHER, SHOULDERED (BOLT ASSEMBLY, CLAMP) (NO S/S
DOCUMENT)
MIL-B-70332/5 NOT 1 WASHER, SPRING TENSION (BOLT ASSEMBLY, CLAMP) (NO
S/S DOCUMENT)
MIL-DTL-25027H(1) NOT 1 NUT, SELF-LOCKING, 250 DEG. F, 450 DEG. F, AND
800 DEG. F (S/S BY NASM-25027)
MIL-DTL-45938/11A NOT 1 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH
(FLOATING, 400 DEG. F) (S/S BY NASM45938/11)
MIL-M-12135/5 NOT 1 WASHER, SPRING TENSION, CURVED, SPRING STEEL (NO S/S
DOCUMENT)
MIL-N-24129/1A NUT, SELF-LOCKING (PLASTIC INSERT), HEXAGON, REGULAR HEIGHT,
250 DEG. F., NICKEL-COPPER ALLOY (S/S BY MS 17828E)
MIL-N-24129/2B NUTS, SELF-LOCKING (PLASTIC INSERT) HEXAGON, REGULAR HEIGHT,
250 DEG. F. (FOR GRADE 8 STEEL BOLTING) (S/S BY MS 17829D)
MIL-N-24129/3 NUT, SELF-LOCKING (PLASTIC INSERT), HEXAGON, REGULAR HEIGHT,
250 DEG. F., FS303 CORROSION RESISTANT STEEL (S/S BY MS 17830C)
MIL-N-24129/4 NUT, SELF-LOCKING, (PLASTIC INSERT), HEXAGON, HEAVY, THIN,
UNC 3B, AUSTENITIC CORROSION RESISTANT STEEL, NONMAGNETIC, 250 DEG. F.
(S/S BY MS 16228A)
MIL-N-24129A NUT, SELF-LOCKING, HEXAGON, (PLASTIC INSERT) 250 DEG F (USE
MIL-N-25027)
MIL-N-3336A(2) NOT 2 NUT, SHEET SPRING, INSTRUMENT MOUNTING
MIL-N-3337C NOT 1 NUT, SHEET SPRING
MIL-N-45938/10(1) NOT 2 NUT, PLAIN, CLINCH AND NUT, SELF LOCKING, CLINCH
(SELF CLINCHING) ROUND (S/S BY NASM45938/10)
MIL-N-45938/12B NOT 1 NUT, PLAIN, SPLINE, ROUND (S/S BY NASM45938/12)
MIL-N-45938/13(1) NOT 2 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH
(SELF-CLINCHING, KNURLED COLLAR, MINIATURE, FLOATING, 450 DEGREE F AND
600 DEGREE F) (S/S BY NASM45938/13)
MIL-N-45938/14 NOT 2 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH
(SELF-CLINCHING, KNURLED COLLAR, FLOATING, 450 DEG. F 600 DEG. F) (S/S
BYNASM45938/14)
MIL-N-45938/1B(1) NOT 1 NUT, PLAIN, CLINCH (SELF-CLINCHING, ROUND) (S/S
BY NASM45938/1)
MIL-N-45938/2A NOT 1 NUT, PLAIN, CLINCHCVAND NUT, SELF LOCKING, CLINCH
(HEXAGON HEAD AND SHANK, SWAGE CLINCH) (S/S BY NASM45938/2)
MIL-N-45938/3B(1) NOT 1 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH
(SELF-CLINCHING, KNURLED COLLAR, 450 DEG. F. AND 600 DEG. F.) (S/S BY
NASM45938/3)
MIL-N-45938/4A NOT 1 NUT, PLAIN, CLINCH (SELF-CLINCHING, FLUSH) (S/S BY
NASM45938/4)
MIL-N-45938/5A(2) NOT 1 NUT, SELF-LOCKING, CLINCH (SWAGE-CLINCHING, KNURLED
SHANK, MINIATURE, 250 DEG. F) (S/S BY NASM45938/5)
MIL-N-45938/6C NOT 1 NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED
SHANK, MINIATURE, 450 DEG. F, OR 800 DEG. F) (S/S BY NASM45938/6)
MIL-N-45938/7C NOT 1 NUT, PLAIN CLINCH AND NUT, SELF-LOCKING CLINCH (KNURLED
COLLAR, MINIATURE, 450 DEG. F) (S/S BY NASM45938/7)
MIL-N-45938/8A NOT 1 NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED
SHANK, 250 DEG. F) (S/S BY NASM45938/8)
MIL-N-45938/9A NOT 1 NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED
SHANK, 250 DEG. F, UNJF-3B) (S/S BY NASM45938/9)
MIL-N-45938A NOT 1 NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, GENERAL
SPECIFICATION FOR (S/S BY NASM45938)
MIL-N-8922/1A NOT 1 NUT, SELF-LOCKING, ASSEMBLED WASHER, ALLOY STEEL,
220 KSI FTU, 450 DEG. F, (12-SPLINE WRENCHING ELEMENT) (S/S BY NASM8922/1)
MIL-N-8922B(1) NOT 1 NUT, SELF-LOCKING, ALLOY STEEL, 220 KSI FTU, 450
DEG. F, GENERAL SPECIFICATION FOR (S/S BY NASM8922)
MIL-N-8984(1) NOT 1 NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F
(S/S BY NASM8984)
MIL-N-8985(2) NOT 1 NUT, SELF LOCKING STEEL, 180 KSI FTU, 450 DEGREE F
(S/S BY NASM8985)
MIL-N-8985/2 NOT 2 NUTS, SHEAR, SELF-LOCKING, STEEL, 180 KSI FTU, 450
DEG. F
MIL-N-8985/3 NOT 1 NUT, CAPTIVE WASHER, SELF-LOCKING, STEEL, 180 KSI FTU,
450 DEG. F, (12-SPLINE) WRENCHING ELEMENT
MIL-N-58086 NUT, SELF-LOCKING, DOUBLE HEXAGON, 1200 DEG F.
MIL-N-6034B NUTS, HEXAGONAL (USE FF-N-836)
MIL-N-7873B(1) NOT 1 NUT, SELF-LOCKING, 1,200 DEG. F (S/S BY NASM7873)
MIL-N-8056 NUT, SELF LOCKING, FREE SPINNING, 1200 DEG F
MIL-N-82512 NOT 1 NUT, CLINCH
MIL-N-85353(1) NOT 1 NUTS (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING,
450 DEG. F, 800 DEG. F AND 1200 DEG. F, GENERAL SPECIFICATION FOR (S/S
BY NASM85353)
MIL-N-85353/1(1) NOT 2 NUT (FASTENER), INTERNALLY THREADED, HEXAGON, REDUCED
HEIGHT 125 KSI AND 200 KSI FTU, 450 DEG. F (S/S BY NASM85353/1)
MIL-N-85353/2A(1) NOT 1 NUT, PRELOAD LOCKING, EXTENDED WASHER, HEXAGON,
REDUCED HEIGHT, CRES 125 KSI 450 DEG. F AND 1200 DEG. F (S/S BY NASM85353/2)
MIL-N-85615(1) NOT 1 NUT, SEALING, SELF-LOCKING, 250 DEG. F, 450 DEG.
F GENERAL SPECIFICATION FOR
MIL-N-85615/1 NOT 1 NUT, SEALING, SELF-LOCKING, 250 DEG. F AND 450 DEG.
F
MIL-N-85615/10 NOT 1 NUT, SELF-SEALING, SELF-LOCKING, CRES, 160 KSI FTU,
250 DEG. F AND 450 DEG. F
MIL-N-85615/2 NOT 1 NUT ASSEMBLY, SELF-SEALING, FLOATING, SELF-LOCKING,
125 KSI FTU, 225 DEG. F, VARIABLE NUT HEIGHT
MIL-N-85615/3 NOT 1 NUT ASSEMBLY, SELF-SEALING, FLOATING, SELF-LOCKING,
125 KSI FTU, 225 DEG. F, VARIABLE NUT HEIGHT 1/64 IN. OVERSIZE (FOR REPAIR)
MIL-N-85615/4 NOT 1 NUT ASSEMBLY, SELF-SEALING, LOW PROFILE, FLOATING,
SELF-LOCKING, 125 KSI FTU, 225 DEG. F
MIL-N-85615/5 NOT 1 NUT ASSEMBLY, SELF-SEALING, FLOATING, LOW PROFILE,
SELF-LOCKING, 125 KSI FTU, 225 DEG. F 1/64 IN. OVERSIZE (FOR REPAIR)
MIL-N-85615/6 NOT 2 NUT ASSEMBLY, SELF-SEALING, SHEAR SLEEVE, CLOSE TOLERANCE,
SELF-LOCKING, REDUCED DIAMETER SLEEVE, 125 KSI FTU, 225 DEG. F, VARIABLE
NUT HEIGHT
MIL-N-85615/7 NOT 1 NUT ASSEMBLY, SELF-SEALING, SHEAR SLEEVE, CLOSE TOLERANCE,
SELF-LOCKING, REDUCED DIAMETER SLEEVE, 125 KSI FTU, 225 DEG. F, VARIABLE
NUT HEIGHT, 1/64 IN. OVERSIZE (FOR REPAIR)
MIL-N-85615/8 NOT 1 NUT, SELF-SEALING, SELF-LOCKING, ALLOY STEEL, 125
KSI FTU, 250 DEG. F AND 450 DEG. F
MIL-N-85615/9 NOT 1 NUT, SELF-SEALING, SELF-LOCKING, ALUMINUM ALLOY, 60
KSI FTU, 250 DEG. F
MIL-N-85729 NOT 1 NUT, SELF-LOCKING, A-286, 160 KSI FTU, 450 DEG. F, GENERAL
SPECIFICATION FOR
MIL-N-85729/1 NOT 1 NUT, SELF-LOCKING, ASSEMBLED WASHER, A-286, 160 KSI
FTU 450 DEG. F, SPLINE WRENCHING ELEMENT
MIL-N-85730(1) NOT 1 NUT, SELF-LOCKING, SPLINE DRIVE, ASSEMBLED WASHER,
NICKEL ALLOY 718, 220 KSI FTU, 900 DEG. F, GENERAL SPECIFICATION FOR (S/S
BY NASM85730)
MIL-N-85730/1 NOT 1 NUT, CAPTIVE WASHER, SELF-LOCKING, NICKEL ALLOY 718,
220 KSI FTU,900 DEGREE (12-SPLINE)WRENCHING ELEMENT (S/S BY NASM85730/1)
MIL-N-85754 NOT 1 NUT, SELF-LOCKING, SPANNER (NO S/S DOCUMENT)
MIL-N-85754/1 NOT 1 NUT, SELF-LOCKING, SPANNER, ALUMINUM (NO S/S DOCUMENT)
MIL-S-933B NOT 1 SCREWS, MACHINE, CAP AND SET, AND NUTS (USE FF-S-85,
FF-S-86, FF-S-92, FF-S-103 AND FF-N-836 AS APPLICABLE)
MIL-STD-1764 NOT 2 WASHER PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
MIL-STD-1903 NOT 1 NUTS, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
MIL-W-1085A WASHER, FLAT (IRON AND STEEL) (USE FF-W-92)
MIL-W-12133/5A NOT 2 WASHER, SPRING TENSION, CURVED, SPRING STEEL
MIL-W-12133/7 NOT 1 WASHER, SPRING TENSION, FINGER TYPE, STEEL (NO S/S
DOCUMENT)
MIL-W-13809A WASHER, BEARING, BALL OR ROLLER W/BUCKET AND GUN
MIL-W-19016B NOT 1 WASHER, PLUMBING (NO S/S DOCUMENT)
MIL-W-45595/1 NOT 1 WASHER, SHOULDERED, POLYAMIDE (NYLON) (S/S BY NASM45595/1)
MIL-W-45595/2 NOT 1 WASHER, SHOULDERED, POLYTETRAFLUOROETHYLENE (S/S BY
NASM45595/2)
MIL-W-45595/3 NOT 1 WASHER, RECESSED, ALUMINUM ALLOY (S/S BY NASM45595/3)
MIL-W-45595/4 NOT 1 WASHER, SADDLE, STEEL, CARBON (S/S BY NASM45595/4)
MIL-W-45595/5 NOT 1 WASHER, SADDLE, ALUMINUM ALLOY (S/S BY NASM45595/5)
MIL-W-45595/6 NOT 1 WASHER, CONVEX, STEEL, ALLOY (S/S BY NASM45595/6)
MIL-W-45595/7 NOT 1 WASHER, CONCAVE, STEEL, ALLOY (S/S BY NASM45595/7)
MIL-W-45595/8 NOT 1 WASHER, SHOULDERED, PHENOLIC (S/S BY NASM45595/8)
MIL-W-45595/9 NOT 2 WASHER, SHOULDERED, GLASS FILLED NYLON (S/S BY NASM45595/9)
MIL-W-45595D NOT 1 WASHERS, SHOULDERED, RECESSED, SADDLE, CONCAVE AND
CONVEX (S/S BY NASM45595)
MIL-W-48105 NOT 1 WASHER (NO S/S DOCUMENT)
MIL-W-6986(2) WASHERS, TOOTH LOCK (USE FF-W-100)
MIL-W-70336/5 NOT 2 WASHER, LOCK, EXTERNAL TOOTH (METRIC)
MIL-W-70342 NOT 1 WASHER, FLAT, METRIC GENERAL SPECIFICATION FOR
MIL-W-70342/1 NOT 2 WASHER, FLAT, REGULAR SERIES (TYPE I), CARBON STEEL,
METRIC
MIL-W-70342/2 NOT 1 WASHER, FLAT, REGULAR SERIES (TYPE I), CRES, METRIC
MIL-W-70342/3 NOT 2 WASHER, FLAT, NARROW SERIES (TYPE II), CARBON STEEL,
METRIC
MIL-W-70342/4 NOT 2 WASHER, FLAT, WIDE SERIES (TYPE III), HIGH STRENGTH,
ALLOY STEEL, METRIC
MIL-W-70342/5 NOT 2 WASHER, FLAT, WIDE SERIES (TYPE III), CARBON STEEL
METRIC
MS122026THRUMS122075A NOT 2 WASHER - LOCK, SPRING (S/S BY SAE-AS122026THRUAS122075)
MS14144C(1) NOT 1 NUT, SELF-LOCKING, LIGHTWEIGHT, CASTELLATED, 450 DEG.
F (S/S BY NASM14144)
MS14145C NOT 1 NUT, SELF-LOCKING, LIGHTWEIGHT, THIN, CASTELLATED, 450
DEG. F (S/S BY NASM14145)
MS14146A(1) NOT 2 NUT, SELF-LOCKING, CASTELLATED, HEXAGON, C'BORED, CAPTIVE
WASHER, 450 DEG. F
MS14151(1) NOT 2 WASHER, FLAT, ROUND, CORROSION RESISTING STEEL (FOR ELECTRICAL
APPLICATIONS) (S/S BY NASM14151)
MS14155 NOT 2 WASHER, RECESSED COUNTERSUNK TWO SURFACES, FOR USE WITH
WHEEL BOLTS AND NUTS UP TO AND INCLUDING 180 KSI FTU (S/S BY NASM14155)
MS14156 NOT 2 NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 180 KSI FTU, 450
DEG. F, SPLINE DRIVE (S/S BY NASM14156)
MS14164A NOT 1 NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 220 KSI FTU,
450 DEG. F SPLINE, DRIVE (S/S BY NASM14164)
MS14177B NOT 1 WASHER, RECESSED, COUNTERSUNK TWO SURFACES, FOR USE WITH
WHEEL BOLTS AND NUTS UP TO AND INCLUDING 220 KSI FTU (S/S BY NASM14177)
MS14179A(1) NOT 2 NUT, PLATE, SELF-LOCKING, FLOATING, TWO LUG, REDUCED
RIVET SPACING, STEEL, (POLYAMIDE INSERT) 500 CYCLES REUSE, REPLACEABLE
NUT, 160 KSI FTU, 450 DEG. F (S/S BY NASM14179)
MS14180 NOT 1 NUT REPLACEMENT FOR SELF-LOCKING PLATE, FLOATING, TWO LUG,
STEEL, (VESPEL*INSERT) 500 CYCLES REUSE 160 KSI FTU, 450 DEG. F.
MS14182B NOT 1 NUT, SELF-LOCKING, EXTENDED WASHER, ROUND, NICKEL ALLOY
718, 220 KSI FTU, 450 DEGREE F AND 800 DEGREE F, SPLINE DRIVE (S/S BY
NASM14182)
MS14183B NOT 1 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS
UP TO AND INCLUDING 220 KSI FTU (S/S BY NASM14183)
MS14194 NOT 2 NUTS (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING,
450 DEG. F, 800 DEG. F, 1200 DEG. F, RELIABILITY AND MAINTAINABILITY DESIGN
REQUIREMENTS FOR
MS14199 NOT 3 NUT ASSEMBLY, FLOATING, SELF-LOCKING, RIVETLESS, ATTACHED
RETENTION ELEMENT, (A.R.E.), MAINTAINABILITY AND RELIABILITY DESIGN AND
USAGE LIMITATIONS FOR
MS14200B NOT 1 NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT
(A.R.E.) 450 DEG. F, STEEL, 125 KSI FTU, REPLACEABLE NUT ELEMENT (S/S
BY NASM14200)
MS14201A NOT 1 NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT
(A.R.E.), 450 DEG. F, STEEL, 125 KSI FTU, REPLACEABLE NUT ELEMENT, 1/64
OVERSIZE REPAIR (SS BY NASM14201)
MS14210A NOT 1 NUT,FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT
(A. R. E), 450 DEG. F, CRES (A-286), 125 KSI FTU, REPLACEABLE NUT ELEMENT
(S/S BY NASM14210)
MS14211A NOT 1 NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT
(A.R.E.), 450 DEG. F, CRES (ASTM A-286), KSI FTU, REPLACEABLE NUT ELEMENT,
1/64 OVERSIZE REPAIR
MS14213(1) NOT 1 NUT ELEMENT, REPLACEABLE, ATTACHED RETENTION ELEMENT
(A.R.E.), 450 DEG. F. CRES (A-286), 125 KSI FTU (S/S BY NASM14213)
MS14214A NOT 1 NUT ELEMENT, ATTACHED RETENTION ELEMENT (A.R.E.), 450 DEG.
F, STEEL (AISI 1050 OR 4130), 125 KSI FTU (S/S BY NASM14214)
MS14222 NOT 2 NUT, SELF-LOCKING, 450 DEG. F, HEXAGON, REDUCED HEAD HEIGHT,
RING BASE, CORROSION RESISTANT STEEL (S/S BY NASM14222)
MS14226 NOT 1 WASHER, FLAT, FOR OVERSIZE FASTENERS AND FASTENER SLEEVE
MS14228A NUT, PLATE ASSEMBLY, FLOATING, SELF-LOCKING, ATTACHED RETENTION
ELEMENT (A.R.E.) COUNTERBORE, 450 DEGREE ALLOY STEEL, 125 KSI FTU, REPLACEABLE
NUT ELEMENT (S/S BY MS14200)
MS14229A NUT, PLATE ASSEMBLY, FLOATING, SELF-LOCKING, ATTACHED RETENTION
ELEMENT (A.R.E.) COUNTERBORE, 450 DEGREE ALLOY STEEL, 125 KSI FTU, REPLACEABLE
NUT ELEMENT, 1/64 OVERSIZE REPAIR (S/S BY MS14201)
MS14491C(1) NOT 1 NUT, WHEEL, SELF-LOCKING, FLANGED, NICKEL ALLOY 718,
220 KSI FTU, 450 DEG. F, SPLINE DRIVE (S/S BY NASM14491)
MS14493 NOT 1 NUT, SELF-LOCKING, CHANNEL, FLOATING, CARBON STEEL, 125
KSI, FTU (S/S BY NASM14493)
MS15178 WASHER, FIBER, CAP NUT (FOR PRESSED METAL LAVATORY)
MS15180 WASHER, BRASS, DIAPHRAM (FOR PRESSED METAL LAVATORY)
MS15795G NOT 1 WASHER, FLAT METAL, ROUND, GENERAL PURPOSE (S/S BY NASM15795)
MS15820A WASHER, LOCK SPECIAL DESIGN, GALVANIZED STEEL (NO S/S DOCUMENT)
MS15983A(1) NOT 1 NUT, PLAIN, PLATE, NON-COUNTERSUNK
MS16203C(1) NOT 1 NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC
MS16210A NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B, NONMAGNETIC (USE
MS-35649)
MS16211A NOT 2 NUTS, PLAIN, SQUARE, REGULAR, UNFINISHED, COPPER-SILICON
ALLOY, UNC-2B NONMAGNETIC
MS16212B NOT 2 WASHERS, FLAT, METAL, ROUND, MEDIUM SERIES, NONMAGNETIC
MS16213C NOT 3 WASHER, LOCK, FLAT, EXTERNAL TOOTH, NONMAGNETIC
MS16214 WASHER, LOCK, SPRING, NONLINK, MEDIUM SERIES, NON-MAGNETIC (S/S
BY MS-35338C)
MS16228A(1) NOT 1 NUT, SELF-LOCKING, HEXAGON-THIN, UNC 3B (NON METALLIC
INSERT) AUSTENITIC CORROSION RESISTANT STEEL, NONMAGNETIC, 250 DEG. F
(S/S BY NASM16228)
MS16285A NOT 2 NUTS, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH
TEMPERATURE - TO 1000 DEG. F
MS16286A(1) NOT 2 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH
TEMPERATURE - TO 1000 DEG. F
MS17186A(1) NOT 1 WASHER, DRIVE (SYNCHRO)
MS17187B(1) NOT 1 NUT, PLAIN, HEXAGON
MS17188B NOT 1 WASHER, FLAT (ROUND), CRES
MS172201THRUMS172235B NOT 2 WASHER, KEY - SINGLE, BEARING RETAINING, AMS6350
(ASG) (S/S BY SAE-AS172201THRUAS172235)
MS172236THRUMS172270B NOT 2 NUT, SPANNER, BEARING RETAINING, AERONAUTICAL
(ASG) (S/S BY SAE-AS172236THRUAS172270)
MS172271THRUMS172320B NOT 2 WASHER, KEY - SINGLE, AMS 6350 (ASG) (S/S
BY SAE-AS172271THRUAS172320)
MS172321THRUMS172370 NOT 2 NUT - SPANNER, AERONAUTICAL (S/S BY SAE-AS172321THRUAS172370)
MS17354A NUT-PLAIN, HEX, BOSS CONNECTION, ALUMINUM (MIL-S-8879 THREAD)
MS17826H NOT 2 NUT, SELF-LOCKING, CASTELLATED, HEXAGON 250 DEG. F, THIN
NON-METALLIC INSERT
MS17828J NOT 2 NUT, SELF-LOCKING, HEXAGON, REGULAR-HEIGHT, (NON-METALLIC
INSERT) 250 DEG. F, NICKEL-COPPER ALLOY (S/S BY NASM17828)
MS17829E NOT 2 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F.,
(NON METALLIC INSERT) NON-CORROSION-RESISTANT STEEL (S/S BY NASM17829)
MS17830E NOT 1 NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEG. F, AND 450
DEG. F (NON-METALLIC INSERT), 300 SERIES CORROSION RESISTANT STEEL (S/S
NASM17830)
MS17973A WASHER, AIRCRAFT GENERATOR RETAINING STUD
MS17980A MAGNETIC PARTICLE INDICATIONS ON STEEL NUTS (USE MIL-S-1222)
MS19067A NOT 1 NUTS, PLAIN, ROUND, RETAINING, BALL AND ROLLER BEARING,
LIGHT SERIES
MS19068A(1) NOT 1 NUTS, PLAIN, ROUND, RETAINING, BALL AND ROLLER BEARING
REGULAR SERIES
MS20002E NOT 2 WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH (S/S BY NASM20002)
MS20341D NUT, PLAIN, HEXAGON, ELECTRICAL (ASG) (USE MS 35649 AND MS 35650)
MS20364C NUT, SELF LOCKING, THIN, 250 DEG. F (USE MS21042, MS 21083 OR
MS 21245)
MS20365C NUT, SELF-LOCKING, 250 DEG. F (ASG) (S/S BY MS21042)
MS20500E(1) NOT 1 NUT, SELF LOCKING, HEXAGON, 1200 DEG. F, 125 KSI FTU
MS20501D NOT 1 NUT, SELF LOCKING, PLATE, TWO LUG, 1200 DEG. F, 125 KSI
FTU (S/S BY NASM20501)
MS20503A NUT-SELF LOCKING, FREE SPINNING, 1200 DEG. F (S/S BY MS20500)
MS21025F NOT 1 NUT, CASTELLATED, HEXAGON (S/S BY NASM21025)
MS21040C NUT, SELF-LOCKING, 500 DEG. F, HEXAGONAL, REDUCED HEIGHT (SUPERSEDED
BY MS21042)
MS21042M NOT 1 NUT, SELF-LOCKING, 450 DEG. F, REDUCED HEXAGON, REDUCED
HEIGHT, RING BASE, NON-CORROSION RESISTANT STEEL (S/S BY NASM21042)
MS21043E(1) NOT 1 NUT, SELF-LOCKING, 800 DEG. F, REDUCED HEXAGON, REDUCED
HEIGHT, RING BASE, CORROSION RESISTANT STEEL (S/S BY NASM21043)
MS21044H NOT 1 NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F,
125 KSI FTU AND 60 KSI FTU (S/S BY NASM21044)
MS21045L NOT 1 NUT, SELF-LOCKING HEXAGON-REGULAR HEIGHT, 450 DEG. F, 125
KSI FTU (S/S BY NASM21045)
MS21046D NOT 1 NUT, SELF LOCKING, HEXAGON-REGULAR HEIGHT, 800 DEG. F,
125 KSI FTU (ASG) (S/S BY NASM21046)
MS21047F NOT 1 NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125
KSI FTU, 450 DEG. F (S/S BY NASM21047)
MS21048F NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125
KSI FTU, 450 DEG. AND 800 DEG. F. (S/S BY NASM21048)
MS21049F NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG. CSK LOW HEIGHT,
STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21049)
MS21050D NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG CSK. LOW HEIGHT,
CRES, 125 KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21050)
MS21051G(1) NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL,
125 KSI FTU, 450 DEG. F (S/S BY NASM21051)
MS21052F NOT 2 NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CRES, 125
KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21052)
MS21053D NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK LOW HEIGHT,
ALLOY STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21053)
MS21054E NOT 2 NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK, LOW HEIGHT,
CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21054)
MS21055G NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, STEEL, 125
KSI FTU, 450 DEG. F (S/S BY NASM21055)
MS21056F NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125
KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21056)
MS21057G NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT,
ALLOY STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21057)
MS21058D NOT 2 NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT,
CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21058)
MS21059J NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT
STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21059)
MS21060F NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT,
CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21060)
MS21061G NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT,
STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21061)
MS21062E NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT,
CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21062)
MS21063H(3) NOT 1 NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT,
STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21063)
MS21064G NOT 1 NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL,
125 KSI FTU, 450 DEG. F (S/S BY NASM21064)
MS21065E NOT 1 NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES,
125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21065)
MS21066G NOT 1 NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING,
LOW HEIGHT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21066)
MS21067G NOT 1 NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING,
LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21067)
MS21068F NOT 1 NUT, SELF-LOCKING, CHANNEL, 100 DEG CSK, FLOATING, LOW
HEIGHT, CRES, 125KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21068)
MS21069G NOT 1 NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING,
LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21069)
MS21070F NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, REDUCED RIVET SPACING,
LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21070)
MS21071G(1) NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING,
LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21071)
MS21072G(1) NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING,
LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21072)
MS21073G NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING,
LOW HEIGHT, STEEL, 125KSI FTU, 450 DEG. F (S/S BY NASM21073)
MS21074F NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING,
LOW HEIGHT, CRES, 125 KSI, FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21074)
MS21075H NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET
SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21075)
MS21076H NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET
SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S
BY NASM21076)
MS21077H(1) NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC
INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21077)
MS21078G(2) NOT 1 NUT, SELF-LOCKING, PLATE, TWO LUG, NON-METALLIC INSERT,
STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21078)
MS21079F NOT 1 NUT, SELF-LOCKING, GANG CHANNEL, NON-METALLIC INSERT, 125
KSI FTU, 250 DEG. F (S/S BY NASM21079)
MS21080D NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, NON-METALLIC INSERT,
STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21080)
MS21081D NOT 1 NUT, SELF-LOCKING, PLATE, CORNER, NON-METTALIC INSERT,
STEEL, 125KSI FTU, 250 DEG. F (S/S BY NASM21081)
MS21082F NOT 1 NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, NON-METALLIC
INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21082)
MS21083H NOT 1 NUT, SELF-LOCKING, HEXAGON NON-METALLIC INSERT, LOW HEIGHT,
250 DEG. F (S/S BY NASM21083)
MS21084B NOT 1 NUT, SELF LOCKING, STEEL, 220 KSI FTU, 450 DEG. F., FLANGED,
MS33787 WRENCHING ELEMENT (NASM21084)
MS21085A NOT 2 NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F, FLANGED,
MS33787 WRENCHING ELEMENT (S/S BY NASM21085)
MS21086D NOT 1 NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING,
LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21086)
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
