〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
MS21087B
NOT 1 NUT, SELF-LOCKING, PLATE, SIDE BY SIDE REDUCED RIVET SPACING, LOW
HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21087)
MS21088C NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES, 125KSI
FTU, 250 DEGREES F (USE MS21065)
MS21089C NUT, SELF LOCKING, CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT,
CRES, 125KSI FTU, 250 DEG. FTU, 250 DEG. F (SEE MS 21068)
MS21133A(1) NOT 1 NUT, SELF-LOCKING, STEEL, 180 KSI FTU, 450 DEG. F, FLANGED,
MS33787 WRENCHING ELEMENT (S/S BY NASM21133)
MS21206A NOT 1 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS
UP TO AND INCLUDING 220 KSI FTU
MS21224D NOT 1 NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED,
ASSEMBLED WASHER, 250 DEG. F, NON-METALLIC INSERT (FOR SELF-RETAINING
BOLTS) (S/S BY NASM21224)
MS21225A(1) NOT 1 NUT, SELF-LOCKING, CASTELLATED, HEXAGON - 800 DEG. F
(S/S BY NASM21225)
MS21244B(1) NOT 1 NUT, CASTELLATED, HEXAGON, COUNTERBORED ASSEMBLED WASHER,
450 DEG. F (FOR SELF RETAINING BOLTS) (S/S BY NASM21244)
MS21245D NOT 1 NUT, SELF-LOCKING, HEXAGON, THIN, 450 DEGREE F, 80 KSI
FTU (S/S BY NASM21245)
MS21258A NOT 1 WASHER, KEY, RETAINING, WHEEL BEARING (S/S BY NASM21258)
MS21264 NOT 2 NUT DRILLED JAM
MS21299A NOT 1 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS
UP TO AND INCLUDING 260 KSI FTU (S/S BY NASM21299)
MS21302 NUT, EYE (OVAL)
MS21303B(1) NOT 1 NUT, EYE, THIMBLE HOT DIP GALVANIZED (POLE LINE)
MS21304B NOT 3 NUT, PLAIN, SQUARE
MS21305 WASHER, CUSHION, ROUND
MS21306B NOT 2 WASHER, FLAT (ROUND)
MS21307B(1) NOT 2 WASHER, FLAT (SQUARE)
MS21308C(1) NOT 1 WASHER, SADDLE SQUARE, CURVED (POLE LINE)
MS21331B(1) NOT 1 NUT, PLAIN, CLINCH
MS21340C NOT 1 NUT, PLAIN, HEXAGON, ELECTRICAL, THIN (WITH LOCKWIRE HOLES)
MS21392A NOT 1 NUT, PLAIN, HEXAGON-AZIMUTH (WITH LOCKWIRE HOLES) (S/S
BY NASM21392)
MS21441B NOT 1 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL HEAVY STUD,
SEALED, TYPE IX, ANTIFRICTION, INCH (S/S BY SAE-AS21441)
MS21448 NOT 3 NUT, SELF-LOCKING, PLATE, SPACER, LIGHT TO MEDIUM DUTY
MS21449 NOT 3 NUT, SELF-LOCKING, PLATE, SPACER, LIGHT DUTY
MS21450 NOT 1 NUT, SELF-LOCKING, EXTENDED WASHER, HEXAGON, REDUCED HEXAGON,
C'BORE (NO S/S DOCUMENT)
MS24017C(1) NUT PLAIN, HEXAGON, MOUNTING
MS24127D NOT 1 NUT-PLAIN, HEXAGON, NYLON (NO S/S DOCUMENT)
MS24400C NUT, PLAIN, HEXAGON-BULKHEAD AND UNIVERSAL FITTING MOUNTING,
PRECISION TYPE (S/S BY AN924)
MS24679E(1) NOT 1 NUT, PLAIN, CAP, LOW CROWN, UNC-2B AND UNF-2B (S/S BY
A-A-55629)
MS24680F(1) NOT 1 NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B (S/S BY
A-A-55628)
MS24689B NUT, PLAIN, HEXAGON, TRACK (S/S BY ANSI-B18.10 NOW ASME-B18.10)
MS25082P(1) NOT 1 NUT, PLAIN, HEXAGON, ELECTRICAL-THIN
MS25196F SEAL, BUSHING, EXTERNAL (S/S BY MIL-B-5423/16 NOW MIL-DTL-5423/16)
MS25440C NOT 2 WASHERS, FOR USE WITH AIRCRAFT ALUMINUM TERMINALS (S/S
BY NASM25440)
MS27040B(1) NOT 2 NUT, PLAIN, SQUARE-STEEL, CADMIUM PLATED
MS27051B WASHER, SLOTTED
MS27111A NOT 2 WASHER, KEY, FLAT, GENERAL PURPOSE
MS27112A WASHER, KEY-BENT TAB, GENERAL PURPOSE (USE MS172271 THRU MS172320)
MS27127D NOT 1 NUT, WELDING - WITHOUT PILOT
MS27128D NOT 1 NUT, WELDING-PILOT
MS27129C NOT 3 WASHER, FINISHING-COUNTERSUNK
MS27130F NOT 1 NUT, PLAIN, BLIND RIVET-FLAT AND COUNTERSUNK HEAD, OPEN
END (S/S BY NAS1329 AND NAS1330)
MS27131C NOT 2 NUT, PLAIN, BLIND RIVET-FLAT HEAD, CLOSED END (S/S BY NAS1329)
MS27151B NOT 1 NUT, STAMPED AND STANDARD TYPE
MS27183J NOT 1 WASHER, FLAT (ROUND, STEEL, CADMIUM PLATED) GENERAL PURPOSE
MS27952A NOT 2 NUT, PLAIN-HEXAGON, JAM, LEFT HAND
MS27955A(1) NOT 1 NUT, PLAIN-ROUND, SPANNER
MS3214(1) NOT 1 NUT, PLAIN, CLINCH-FLUSH (S/S BY NASM3214)
MS33538A NOT 1 NUT, SHEET SPRING, LIMITATIONS FOR USAGE ON AIRCRAFT
MS33588E NOT 2 NUTS, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY
USAGE REQUIREMENTS FOR (S/S BY NASM33588)
MS33737B(1) NOT 1 NUT, SHEET SPRING, INSTRUMENT MOUNTING (S/S BY NASM33737)
MS3376B NOT 1 NUT, SELF LOCKING, REDUCED HEIGHT, STEEL, 450 DEG. F, 12
POINT, CAPTIVE WASHER
MS33784 NOT 2 WRENCHING FEATURES FOR CYLINDRICAL NUTS, DESIGN STANDARD
FOR
MS35134A NOT 1 NUT, PLAIN ROUND (NO S/S DOCUMENT)
MS35333K(1) NOT 4 WASHER, LOCK, FLAT-INTERNAL TOOTH (S/S BY NASM35333)
MS35334D(1) NOT 1 WASHER, LOCK, FLAT, HEAVY, INTERNAL TOOTH
MS35336D(1) NOT 2 WASHER, LOCK COUNTERSUNK, 80 DEG. 82 DEG., EXTERNAL
TOOTH (IN/MM)
MS35337A WASHER, LOCK, SPLIT, HELICAL, LIGHT SERIES (S/S BY MS-35338)
MS35338L NOT 4 WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES (S/S
BY NASM35338)
MS35339B WASHER, LOCK, SPLIT, HELICAL, HEAVY SERIES (S/S BY MS 35340)
MS35340F(1) NOT 1 WASHER, LOCK-HELICAL SPRING, EXTRA DUTY (EXTRA-HEAVY)
SERIES
MS35425E NOT 1 NUT PLAIN, WING, UNC-2B
MS35426E NOT 1 NUT, PLAIN, WING, UNF-2B
MS35475C NUT, PLAIN, SQUARE, TRACK (S/S BY ANSI-B18.10)
MS35649H NOT 2 NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B (S/S BY NASM35649)
MS35650G(1) NOT 2 NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B (S/S BY NASM35650)
MS35692B(1) NOT 2 NUT, SLOTTED, HEXAGON, UNC-2B AND UNF-2B
MS35790E(1) NOT 1 WASHER, LOCK-COUNTERSUNK, 100 DEG., EXTERNAL TOOTH (IN./MM)
MS39057 BUSHING, SLEEVE, CABLE ADAPTER, MOLDED (S/S BY MS3420)
MS45901A WASHER, FLAT, ELECTRICAL (S/S BY AN961)
MS45902 WASHER, RECESSED (USE AN-975)
MS45904B NOT 3 WASHER, LOCK, INTERNAL AND EXTERNAL TOOTH
MS45905A(2) NOT 1 NUT, PLAIN - HEXAGON, FINISHED, LEFT HAND
MS51412C NOT 1 WASHER, FLAT - ROUND, STEEL, GENERAL PURPOSE
MS51413A NOT 1 WASHER, LOCK, FLAT-INTERNAL TOOTH
MS51414A NOT 1 WASHER, LOCK, FLAT-EXTERNAL TOOTH
MS51416A NOT 1 WASHER, LOCK-HELICAL SPRING, HEAVY DUTY
MS51468 NOT 1 NUT, PLAIN, WING, CARBON STEEL, UNC-2B
MS51469 NOT 1 NUT, PLAIN, HEXAGON (MACHINE SCREW), CARBON STEEL, UNC-2B
MS51470 NOT 1 NUT, PLAIN, HEXAGON (MACHINE SCREW), CARBON STEEL, UNF-2B
MS51471 NOT 1 NUT, PLAIN, HEXAGON (JAM), CARBON STEEL, UNC-2B
MS51472 NOT 1 NUT, PLAIN, HEXAGON, CARBON STEEL, UNC-2B
MS51473 NOT 1 NUT, PLAIN, HEXAGON, CARBON STEEL, UNF-2B
MS51496B(1) NOT 1 WASHER, FLAT-NARROW SERIES
MS51552A NOT 1 NUT, SELF-LOCKING, PLATE, RIGHT ANGLE FLOATING, 125 KSI
FTU 450 DEG.F
MS51553 NOT 1 NUT, SELF-LOCKING, WING
MS51848E NOT 3 WASHER, LOCK-HELICAL SPRING, HI-COLLAR
MS51857 NOT 2 NUT, PUSH-ON, STEEL
MS51858B(1) NOT 1 NUT, PLAIN HEXAGON, PLASTIC NYLON
MS51859B(1) NOT 1 WASHER, FLAT PLASTIC NYLON
MS51865A NOT 1 NUT, SELF-LOCKING, CAP-GENERAL PURPOSE, 250 DEG., F
MS51866A(1) NOT 2 NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG.
F
MS51867A NOT 1 WASHER, METAL, FLAT, PLAIN, RECTANGULAR
MS51922E NOT 2 NUT, SELF-LOCKING, HEXAGON-PREVAILING TORQUE, GENERAL PURPOSE,
250 DEG. F, UNC-2B AND UNF-2B (S/S BY MIL-DTL-45913)
MS51936B NOT 2 WASHER, FLAT (BURR)
MS51941B NOT 1 NUT, PLAIN, PLATE (S/S BY A-A-55625)
MS51943C NOT 3 NUT, SELF LOCKING, HEXAGON PREVAILING TORQUE, FOR CRITICAL
INSTALLATIONS, 250 DEG. F, UNC-3B AND UNF-3B (S/S BY MIL-DTL-45913)
MS51969B(1) NOT 1 NUT, PLAIN, HEXAGON BRASS, BLACK CHEMICAL FINISH, UNC-2B
MS51970A(1) NOT 1 NUT, PLAIN, HEXAGON-BRASS, BLACK CHEMICAL FINISH, UNF-2B
MS51971B(1) NOT 1 NUT, PLAIN, HEXAGON-STEEL, CORROSION RESISTING, 300
SERIES, PASSIVATED, UNC-2B
MS51972A NOT 2 NUT, PLAIN, HEXAGON-STEEL, CORROSION RESISTING, 300 SERIES,
PASSIVATED, UNF-2B
MS51983E NOT 1 NUT, PLAIN, SINGLE BALL SEAT, HEXAGON WHEEL MOUNTING-3/4
AND 1-1/8 INCH (S/S BY A-A-52427)
MS51984F NOT 1 NUT, PLAIN, CONE SEAT, HEXAGON: WHEEL MOUNTING, 1/2 INCH
(NO S/S DOCUMENT)
MS51988B(1) NOT 2 NUT, SELF-LOCKING, FLANGED, PREVAILING TORQUE, STEEL,
CADMIUM, UNC AND UNF
MS52119B NUT PLAIN HEXAGON (SEE REVISION "B" FOR REPLACEMENT
INFORMATION)
MS53069E NOT 2 NUT, PLAIN, ASSEMBLED WASHER: 7/16 INCH (FLOATING TYPE)
MS63040 WASHER, FLAT, FOR WOOD (S/S BY AN970)
MS87016A NUT, SELF LOCKING, DOUBLE HEXAGON, 1200 DEG F., 160 KSI FTU (NO
S/S DOCUMENT)
MS90132B NUT, HEX, USED WITH R.F. COAXIAL CONNECTORS
MS90136A WASHER, SPRING TENSION, SERIES N CONNECTORS
MS90164A WASHER, FLAT, SERIES N CONNECTORS
MS90217A(1) NOT 2 WASHER, SPRING, PART OF RF COAXIAL CONNECTORS
MS90221A NOT 1 WASHER, HALF; PART OF SERIES G CONNECTORS (NO S/S DOCUMENT)
MS90415C NOT 1 NUT, SELF-LOCKING, STEEL, 160KSI, 450 DEG. F 12 POINT,
CAPTIVE WASHER (S/S BY NASM90415)
MS90723 NOT 1 NUT, SHEET SPRING AND J TYPE
MS90724 NOT 1 NUT, SHEET SPRING AND U TYPE
MS9081B NOT 3 WASHER, KEY-DOUBLE, BEARING RETAINING, AMS 6350
MS9099C NOT 1 NUT - HEX, BOSS CONNECTION, ALUMINUM (S/S BY SAE-AS90991)
MS9100B(1) NOT 1 NUT - HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS91001)
MS91611 WASHER, SPRING TENSION, SERIES LC CONNECTORS (NO S/S DOCUMENT)
MS91612 WASHER, SPRING TENSION, SERIES LC CONNECTORS (NO S/S DOCUMENT)
MS91820 NOT 2 WASHER, SPLIT, PART OF SERIES C CONNECTORS
MS9200C NOT 2 NUT, PLAIN, HEX, BOSS CONNECTION, ALUMINUM (S/S BY SAE-AS92001)
MS9201B NOT 2 NUT, PLAIN, HEX, BOSS CONNECTION, CORROSION RESISTANT STEEL
(S/S BY SAE-AS9201)
MS9274B NOT 3 WASHER, KEY-DOUBLE, BEARING RETAINING, AMS 5510
MS9276B NOT 3 WASHER, KEY-CRES, AMS 5510, 180 DEG. LOCKING (S/S BY SAE-AS9276)
MS9320A NOT 2 WASHER, FLAT - AMS 6350 (S/S BY SAE-AS9320)
MS9321 NOT 2 WASHER, FLAT - AMS 5510 (S/S BY SAE-AS9321)
MS9356F NOT 1 NUT, PLAIN, HEXAGON-A-286 (S/S BY SAE-AS9356)
MS9357B NOT 2 NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (S/S BY SAE-AS9357)
MS9358C NOT 1 NUT, CASTELLATED, HEXAGON-A-286 (S/S BY SAE-AS9358)
MS9359B NOT 2 NUT, CASTELLATED, HEXAGON - A-286, SILVER PLATED (S/S BY
SAE-AS9359)
MS9360B NOT 2 NUT, PLAIN, HEX-DRILLED - A-286, SILVER PLATED (S/S BY SAE-AS9360)
MS9361C NOT 1 NUT, PLAIN, HEXAGON, CHECK-A-286 (S/S BY SAE-AS9361)
MS9362A NOT 2 NUT, PLAIN, HEXAGON, CHECK A-286, SILVER PLATED, MIL-S-8879
(S/S BY SAE-AS9362)
MS9363C NOT 1 NUT, SLOTTED, HEXAGON-SHEAR, A-286 (S/S BY SAE-AS9363)
MS9364A NOT 2 NUT, SLOTTED, HEXAGON - SHEAR, A-286, SILVER PLATED, MIL-S-8879
(S/S BY SAE-AS9364)
MS9482 NOT 2 WASHER, FLAT - STEEL AMS 6437 OR AMS 6485, DIFFUSED NICKEL-CADMIUM
PLATED, COUNTERSUNK (S/S BY SAE-AS9482)
MS9549 NOT 2 WASHER, FLAT - AMS 5510 (S/S BY SAE-AS9549)
MS9553 NOT 2 NUT HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS9553)
MS9581B NOT 2 WASHER, KEY-CRES, AMS 5510, 90 DEG. LOCKING (S/S BY SAE-AS9581)
MS9582B NOT 2 WASHER, KEY-CRES, AMS 5510, 270 DEG. LOCKING (S/S BY SAE-AS9582)
MS9684A NOT 2 WASHER, CUP, LOCK - CRES AMS 5510
MS9766B(1) NOT 1 NUT, DOUBLE HEXAGON, CUPWASHER LOCKED, AMS 5737, CRES
MS9767B NOT 2 NUT, DOUBLE HEXAGON - CUPWASHER LOCKED, AMS 6322, CADIUM
PLATED MIL-S-8879
MS9768B NOT 3 WASHER, FLAT-CRES AMS 5525 OR AMS 5737, COUNTERSUNK
MS9880 NOT 2 WASHER, CUP, LOCK - CRES AMS 5510 (S/S BY SAE-AS9880)
MS9881B NOT 2 NUT, PLAIN, HEXAGON - AMS 6322, CADMIUM PLATE MIL-S-8879
(S/S BY SAE-AS9881)
MS9882 NOT 2 NUT, PLAIN, HEX - DRILLED, AMS 6322, CADMIUM PLATE MIL-S-8879
(S/S BY SAE-AS9882)
MS9984 NOT 1 NUT, SPANNER, END SLOTS, CUPWASHER LOCKED, A-286, SILVER
PLATED, MIL-S-8879 (NO S/S DOCUMENT)
QPL-24129 NOT 1 NUT, SELF-LOCKING, HEXAGON, (PLASTIC INSERT), 250 DEG.
F.
QPL-25027-17 NOT 1 NUT, SELF LOCKING, 250 DEG. F, 450 DEG. F, AND 800
DEG. F (NO S/S DOCUMENT)
QPL-7873-22 NOT 1 NUT, SELF-LOCKING, 1200 DEG. F (NO S/S DOCUMENT)
QPL-8056-1 NUTS, SELF LOCKING, FREE SPINNING, 1200 DEG F (USE MIL-N-7873
OR QPL-7873)
QPL-85353-5 NOT 1 NUT (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING,
450 DEG. F, 800 DEG. F, & 1200 DEG. F, GENERAL SPECIFICATION FOR (NO
S/S DOCUMENT)
QPL-85730-4 NOT 1 NUT, SELF-LOCKING, SPLINE DRIVE, ASSEMBLED WASHER, NICKEL
ALLOY 718, 220 KSI FTU, 900 DEG. F, GENERAL SPECIFICATION FOR (NO S/S
DOCUMENT)
QPL-8922-12 NOT 1 NUT, SELF-LOCKING, STEEL, 220 KSI FTU, 450 DEGREES F
(NO S/S DOCUMENT)
QPL-8984-13 NOT 1 NUT, SELF LOCKING, STEEL, 260 KSI FTU 450 DEG F. (NO
S/S DOCUMENT)
QPL-8985-10 NOT 1 NUT, SELF-LOCKING, STEEL, 180 KSI FTU, 450 DEG. F (NO
S/S DOCUMENT)
SAE-AS172321THRUAS172370 NUT - SPANNER, AERONAUTICAL, UNSS G41400
W-W-81A WASHER, STORAGE BATTERY POST, NONCORROSIVE
A-A-52427 NOT 2 螺母，平原，单球议席，六角轮安装-3 / 4和1 -1/8英寸 NUT, PLAIN, SINGLE BALL
SEAT, HEXAGON WHEEL MOUNTING - 3/4 AND 1-1/8 INCH
A-A-55625 NOT 1 螺母，平原，板 NUT, PLAIN, PLATE
A-A-55628A 螺母，平原，帽子，高级检察官，联合国军司令部- 2B卫星和联合国基金会- 2B卫星 NUT, PLAIN, CAP,
HIGH CROWN UNC-2B AND UNF-2B
A-A-55629 螺母，平原，帽子，低冠的UNC - 2B卫星和联合国基金会- 2B卫星 NUT, PLAIN, CAP, LOW CROWN
UNC-2B AND UNF-2B
ANSI-B18.2.4.2M 螺母，平原，十六进制，风格二-十进制 NUT, PLAIN, HEX, STYLE 2 - METRIC
ASME-B18.13.1M 螺丝和垫圈集会-中小企业（公制系列） SCREW AND WASHER ASSEMBLIES - SEMS (METRIC
SERIES)
ASME-B18.16.1M 钢公制六角螺母和六角法兰螺母，当时的转矩和机械性能要求 STEEL METRIC HEX NUTS AND HEX
FLANGE NUTS, PREVAILING-TORQUE MECHANICAL AND PERFORMANCE REQUIREMENTS
FOR
ASME-B18.16.2M 钢公制六角螺母和六角法兰螺母，当时的转矩类型，扭矩-张力测试要求 STEEL METRIC HEX NUTS
AND HEX FLANGE NUTS, PREVAILING-TORQUE TYPE, TORQUE-TENSION TEST REQUIREMENTS
FOR
ASME-B18.16.3M 钢公制六角螺母和六角法兰螺母，当时的转矩类型，三维的要求 STEEL METRIC HEX NUTS AND
HEX FLANGE NUTS, PREVAILING-TORQUE TYPE, DIMENSIONAL REQUIREMENTS
ASME-B18.2.2 螺母，六角和正方形（英寸系列） NUT, HEX AND SQUARE (INCH SERIES)
ASME-B18.2.3.4M 螺母，六角法兰公制 NUT, HEX FLANGE METRIC
ASME-B18.21.1 洗衣机，锁 WASHER, LOCK
ASME-B18.21.2M 锁垫圈（公制系列） LOCK WASHERS (METRIC SERIES)
ASME-B18.22.1 平原垫圈 PLAIN WASHERS
ASTM-A194/A194M 坚果，碳合金钢螺栓高压力或高温度的服务，或两者 NUTS, CARBON AND ALLOY STEEL FOR
BOLTS FOR HIGH-PRESSURE OR HIGH-TEMPERATURE SERVICE, OR BOTH
ASTM-A563 坚果，碳和合金钢 NUTS, CARBON AND ALLOY STEEL
ASTM-A563M 坚果，碳合金钢（公制） NUTS, CARBON AND ALLOY STEEL (METRIC)
ASTM-F436 洗衣机，淬硬钢 WASHERS, HARDENED STEEL
ASTM-F436M 洗衣机，淬硬钢（公制） WASHERS, HARDENED STEEL (METRIC)
ASTM-F467 坚果，有色金属，一般使用 NUTS, NONFERROUS, FOR GENERAL USE
ASTM-F467M 坚果，有色金属，一般使用（公制） NUTS, NONFERROUS, FOR GENERAL USE (METRIC)
ASTM-F594 坚果，不锈钢 NUTS, STAINLESS STEEL
ASTM-F812/F812M 坚果，表面不连续性，英寸和公制系列 NUTS, SURFACE DISCONTINUITIES OF, INCH
AND METRIC SERIES
ASTM-F836 钢，不锈钢，公制坚果 STEEL, STAINLESS, METRIC NUTS
ASTM-F836M 钢，不锈钢，风格1 ，公制坚果 STEEL, STAINLESS, STYLE 1, METRIC NUTS
ASTM-F844 垫圈，钢铁，平原（单位） ， unhardened一般使用 WASHERS, STEEL, PLAIN (FLAT),
UNHARDENED FOR GENERAL USE
ASTM-F959M 洗衣机类型可压缩直接拉伸指标的使用与结构紧固件（公制） WASHER-TYPE-COMPRESSIBLE DIRECT
TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS (METRIC)
FF-N-836E 螺母：广场，六角形，帽子，开槽，城堡，技术特性，焊接和单球席位 NUT: SQUARE, HEXAGON, CAP, SLOTTED,
CASTLE, KNURLED, WELDING AND SINGLE BALL SEAT
FF-N-845D 螺母，平原，翼，英寸和公制 NUT, PLAIN, WING, INCH AND METRIC
MIL-DTL-45913/1 螺母，自锁，六角形，非金属锁功能， 250度男，联合国军司令部/联合国基金会- 2B卫星 NUT, SELF-LOCKING,
HEXAGON, NON-METALLIC LOCKING FEATURE, 250 DEG F, UNC/ UNF-2B
MIL-DTL-45913/2 螺母，自锁，六角全金属锁功能， 250度男，联合国军司令部/联合国基金会- 2B卫星 NUT, SELF-LOCKING,
HEXAGON ALL-METAL LOCKING FEATURE, 250 DEG F, UNC/ UNF-2B
MIL-DTL-45913/3A(1) 螺母，自锁，六角非非金属锁功能， 250度男，联合国军司令部/联合国基金会- 3B型 NUT, SELF-LOCKING,
HEXAGON NON-METALLIC LOCKING FEATURE, 250 DEG F, UNC/ UNF-3B
MIL-DTL-45913/4A(1) 螺母，自锁，六角全金属锁功能， 250度男，联合国军司令部/联合国基金会- 3B型 NUT, SELF-LOCKING,
HEXAGON ALL-METAL LOCKING FEATURE, 250 DEG F, UNC/ UNF-3B
MIL-DTL-45913C 螺母，自锁，六角形，当时转矩 NUTS, SELF-LOCKING, HEXAGON, PREVAILING
TORQUE
A-A-1958 NAIL (COMMON) (S/S BY FF-N-105)
A-A-1960 NAIL (BRAD, FINE) (S/S BY FF-N-105)
A-A-1961 NAIL (ROOFING COMPOSITION) (S/S BY FF-N-105)
A-A-1962 NAIL (BOX, BRIGHT) (S/S BY FF-N-105)
A-A-1963 NAIL (BOX, CEMENT COATED) (S/S BY FF-N-105)
A-A-2670A NOT 1 STAPLE, TACKER (NO S/S DOCUMENT)
A-A-55486 NOT 1 PIN, HINGE (S/S BY MS20253)
AN121601THRUAN121650 REV 3 NOT 1 PIN, STRAIGHT, HEADED - .125 NOM. (S/S
BY SAE-AS121601THRUAS121650)
AN121651THRUAN121700 REV 3 NOT 1 PIN, STRAIGHT, HEADED - .187 NOM. (S/S
BY SAE-AS121651THRUAS121700)
AN121701THRUAN121750 REV 3 NOT 1 PIN, STRAIGHT, HEADED - .250 NOM. (S/S
BY SAE-AS121701THRUAS121750)
AN121751THRUAN121800 REV 3 NOT 2 PIN, STRAIGHT, HEADED - .312 NOM. (S/S
BY SAE-AS121751THRUAS121800)
AN121801THRUAN121850 REV 3 NOT 2 PIN, STRAIGHT, HEADED - .375 NOM. (S/S
BY SAE-AS121801THRUAS121850)
AN121851THRUAN121925 REV 3 NOT 2 PIN, STRAIGHT, HEADED - .500 NOM. (S/S
BY SAE-AS121851THRUAS121925)
AN122676THRUAN122775 REV 2 NOT 1 PIN --DOWEL, STEEL (S/S BY SAE-AS122676THRUAS122775)
AN122776THRUAN122802 REV 2 KEY-CHAMFERED WOODRUFF
AN150201THRUAN150300 REV 1 NOT 2 PIN-LOCK, STEEL (S/S BY SAE-AS150201THRUAS150300)
AN150301THRUAN150400 NOT 2 PIN-LOCK, BRASS (S/S BY SAE-AS150301THRUAS150400)
AN280 REV 4 KEY-WOODRUFF (S/S BY MS35756)
AN301 NAIL - FLAT HEAD (NO SUPERSEDING DOCUMENT) (USE FED SPEC FF-N-103
OR FF-N-105)
AN302 NOT 3 PIN ESCRUTCHEON (S/S BY NASM302)
AN303 NAIL - UPHOLSTER S - OVAL
AN380 REV 7 PIN, COTTER (NO S/S DOCUMENT)
AN381 REV 4 PIN, COTTER (CORROSION-RESISTANT STEEL) (NO S/S DOCUMENT)
AN385 PIN TAPERED PLAIN (S/S BY MS-24692)
AN386 REV 3 NOT 4 PIN - THREADED TAPER (S/S BY NASM386)
AN392 REV 1 PIN & FLAT HEAD (1&8) (S/S BY MS&20392)
AN393 REV 1 PIN - FLAT HEAD (3-16) (S/S BY MS20392)
AN394 REV 1 PIN & FLAT HEAD (1&4) (S/S BY MS&20392)
AN395 REV 1 PIN & FLAT HEAD (5&16) (S/S BY MS&20392)
AN396 REV 2 PIN & FLAT HEAD (3&8) (S/S BY MS&20392)
AN397 REV 1 PIN & FLAT HEAD (7&16) (S/S BY MS&20392)
AN398 PIN & FLAT HEAD (1&2) (S/S BY MS&20392)
AN399 REV 1 PIN & FLAT HEAD (9&16) (S/S BY MS&20392)
AN400 PIN - FLAT HEAD (5-8) (S/S BY MS20392)
AN402 REV 1 PIN & FLAT HEAD (3&4) (S/S BY MS&20392)
AN404 REV 1 PIN & FLAT HEAD (7&8) (S/S BY MS&20392)
AN406 REV 1 PIN - FLAT HEAD (1) (S/S BY MS20392)
AN409 REV 4 PIN & 100 DEG. COUNTERSUNK HEAD, HIGH SHEAR, OVERSIZE
(SEE MS21001)
AN411 REV 4 PIN & FLAT HEAD, HIGH SHEAR, OVERSIZE, (SEE MS21000)
AN415 REV 3 NOT 1 PIN, LOCK (HITCH PIN) (S/S BY A-A-55487)
AN416 REV 3 NOT 1 PIN, RETAINING, SAFETY (S/S BY A-A-55488)
ANSI-B18.8.1 CLEVIS PINS & COTTER PINS (NO S/S DOCUMENT)
DOD-P-63464/1A NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL TAPER GROOVE,
CARBON STEEL, METRIC
DOD-P-63464/2A NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL TAPER GROOVE,
CORROSION-RESISTING STEEL, METRIC
DOD-P-63464/3A NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL STRAIGHT GROOVE,
CARBON STEEL, METRIC
DOD-P-63464/4A NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL STRAIGHT GROOVE,
CORROSION-RESISTANT STEEL, METRIC
DOD-P-63464/5A NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE,
CARBON STEEL, METRIC
DOD-P-63464/7 NOT 3 PIN, GROOVED, HEADLESS LONGITUDINAL, HALF LENGTH TAPER
GROOVE, CORROSION-RESISTANT, STEEL, METRIC
DOD-P-63464/8 NOT 3 PIN, GROOVED, HEADLESS LONGITUDINAL, HALF LENGTH REVERSE
TAPER GROOVE, CORROSION-RESISTANT STEEL, METRIC
DOD-P-63464A SUP 1A NOT 1 PIN, GROOVED, HEADLESS LONGITUDINAL GROOVE,
GENERAL SPECIFICATION FOR, METRIC
DOD-P-63477 SUP 1 NOT 1 PIN, SPRING, TUBULAR, (COILED AND SLOTTED), GENERAL
SPECIFICATION FOR, METRIC
DOD-P-63477/1 NOT 2 PIN, SPRING, TUBULAR, SLOTTED, CARBON STEEL, METRIC
DOD-P-63477/2 NOT 3 PIN, SPRING, TUBULAR, SLOTTED, CRES 420, METRIC
DOD-P-63477/3 NOT 3 PIN, SPRING, TUBULAR, COILED, LIGHT DUTY, CARBON STEEL,
METRIC
DOD-P-63477/4 NOT 2 PIN, SPRING, TUBULAR, COILED, LIGHT DUTY, CRES 302,
METRIC
DOD-P-63477/5A NOT 2 PIN, SPRING, TUBULAR, COILED, STANDARD DUTY, CARBON
STEEL, METRIC
DOD-P-63477/6 NOT 3 PIN, SPRING, TUBULAR, COILED, STANDARD DUTY, CRES
302, METRIC
DOD-P-63477/7 NOT 3 PIN, SPRING, TUBULAR, SLOTTED, STANDARD DUTY, CRES
420, METRIC
DOD-P-63477/8 NOT 3 PIN, SPRING, TUBULAR, COILED, HEAVY DUTY, CARBON STEEL,
METRIC
DOD-P-63477/9 NOT 3 PIN, SPRING, TUBULAR, COILED, HEAVY DUTY CRES 420,
METRIC
DOD-P-63478(1) NOT 2 PIN, STRAIGHT, HEADLESS (DOWEL), GENERAL SPECIFICATION
FOR, METRIC
DOD-P-63478/1 NOT 3 PIN, STRAIGHT, HEADLESS, (DOWEL) STANDARD SIZE, METRIC
DOD-P-63478/2 NOT 3 PIN, STRAIGHT, HEADLESS (DOWEL) OVERSIZE, METRIC
DOD-P-63479 NOT 1 PIN, STRAIGHT, HEADED (CLEVIS PIN) GENERAL SPECIFICATION
FOR, METRIC
DOD-P-63479/1 NOT 3 PIN, STRAIGHT, HEADED (CLEVIS PIN), METRIC
DOD-P-63542 NOT 2 PIN, GROOVED, HEADED-LONGITUDINAL GROOVE, METRIC, GENERAL
SPECIFICATION FOR
DOD-P-63542/1 NOT 3 PIN, GROOVED, HEADED-LONGITUDINAL GROOVED, ROUND HEAD,
CARBON STEEL, METRIC
FF-F-133A NOT 1 FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE) (NO S/S DOCUMENT)
FF-N-101(2) NAILS, SPIKES, STAPLES, AND TACKS (S/S BY FF-N-103, FF-N-105,
FF-S-611 AND FF-S-606)
FF-N-103C NOT 1 NAIL (SMALL) AND TACK, CUT (SEE FF-N-105 AND FF-T-1813)
FF-N-105B(3) NOT 3 NAILS, BRADS, STAPLES AND SPIKES: WIRE, CUT AND WROUGHT(NO
S/S DOCUMENT)
FF-N-105B(I4) NAILS, BRADS, STAPLES AND SPIKES: WIRE, CUT AND WROUGHT
(S/S BY ASTM-F1667)
FF-P-395/1 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE I - FOR USE WITH DIRECT-ACTING
(GAS DRIVEN, NO PISTON) HIGH VELOCITY TOOLS CLASS 1 - FASTENER GUIDE BORE
DIAMETER 0.251 -0.261 INCH (NO S/S DOCUMENT)
FF-P-395/2 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE I - FOR USE WITH DIRECT-ACTING
(GAS DRIVEN, NO PISTON) HIGH VELOCITY TOOLS CLASS 4 - FASTENER GUIDE BORE
DIAMETER 0.376 - 0.390 INCH (NO S/S DOCUMENT)
FF-P-395/3 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE II - FOR USE WITH INDIRECT-ACTING
(PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 1 - FASTENER GUIDE
BORE DIAMETER 0.251 - 0.261 INCH (NO S/S DOCUMENT)
FF-P-395/4 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE II - FOR USE WITH INDIRECT-ACTING
(PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 2 - FASTENER GUIDE
BORE DIAMETER 0.313 - 0.330 INCH (NO S/S DOCUMENT)
FF-P-395/5 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE II - FOR USE WITH INDIRECT-ACTING
(PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 3 - FASTENER GUIDE
BORE DIAMETER 0.340 - 0.345 INCH (NO S/S DOCUMENT)
FF-P-395/6 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE II - FOR USE WITH INDIRECT-ACTING
(PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 4 - FASTENER GUIDE
BORE DIAMETER 0.376 - 0.390 INCH (NO S/S DOCUMENT)
FF-P-395/7 NOT 1 PIN, DRIVE, POWER ACTUATED, TYPE II - FOR USE WITH INDIRECT-ACTING
(PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 5 - FASTENER GUIDE
BORE DIAMETER 0.392 - 0.400 INCH (NO S/S DOCUMENT)
FF-P-395/8A NOT 1 PIN, DRIVE, HAND ACTUATED, TYPE III-FOR USE WITH HAND
DRIVEN TOOLS CLASS 1-FASTENER GUIDE BORE DIAMETER 0.251-0.261 INCH (NO
S/S DOCUMENT)
FF-P-395/9 NOT 1 PIN, DRIVE, HAND ACTUATED, TYPE III - FOR USE WITH HAND
DRIVEN TOOLS CLASS 1 - FASTENER GUIDE BORE DIAMETER 0.251 - 0.261 INCH
(NO S/S DOCUMENT)
FF-P-395C(1) NOT 1 PIN, DRIVE GUIDED AND PIN DRIVE, POWER ACTUATED (FASTENERS
FOR POWER ACTUATED AND HAND ACTUATED FASTENING TOOLS) (NO S/S DOCUMENT)
FF-S-606(1) SPIKES AND NAILS, COMMON, CUT, SPIKE, GUTTER AND ROUND, WIRE,
AND SPIKE, BARGE AND BOAT, WROUGHT (USE FF-N-105B)
FF-T-1813 NOT 1 TACK (NO S/S DOCUMENT)
MIL-C-82408 NOT 1 CORROSION RESISTANT SPLIT KEYS, BUOY SHACKLE (NO S/S
DOCUMENT)
MIL-F-19700A FASTENERS, SCREW THREADED, AND RELATED ITEMS, NON-MAGNETIC
(NO S/S DOCUMENT)
MIL-K-27545B NOT 1 KEY, WOODRUFF, ALLOY STEEL (S/S BY NASM27545)
MIL-N-1729 NAIL, HORSESHOE
MIL-P-10971E(3) NOT 1 PIN, SPRING, TUBULAR (COILED AND SLOTTED) (S/S BY
NASM 10971)
MIL-P-13390 PIN LOCK. SINTERED IRON
MIL-P-16610B NOT 1 PIN, TAPERED, PLAIN (S/S BY NASM16610)
MIL-P-20700A NOT 1 PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (S/S BY
NASM20700)
MIL-P-21143/1A NOT 1 PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER SIZE)
CRES 303 (NO S/S DOCUMENT)
MIL-P-21143/2 NOT 1 PIN, STRAIGHT, HEADLESS, (DOWEL) (.0002 UNDER SIZE),
CRES 303 (NO S/S DOCUMENT)
MIL-P-21143B(2) NOT 1 PIN, STRAIGHT, HEADLESS (DOWEL) GENERAL SPECIFICATION
FOR (S/S BY NASM21143)
MIL-P-23460E(2) SUP 1 NOT 1 PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING
(S/S BY NASM23460)
MIL-P-27523 PINS, STRAIGHT, HEADED (CLEVIS PINS)
MIL-P-5673D NOT 1 PIN, STRAIGHT, HEADED (S/S BY NASM5673)
MIL-STD-1755 NOT 1 KEYS AND PINS PREFERRED FOR DESIGN, LISTING OF (NO
S/S DOCUMENT)
MS14531 NOT 1 PIN, QUICK RELEASE WITH WARNING STREAMER ASSEMBLY (S/S BY
NASM14531)
MS15025A DOWEL PIN, 1/4-INCH (FOR METAL FURNITURE)
MS15026A DOWEL PIN, 3/8-INCH (FOR METAL FURNITURE)
MS16555C NOT 2 PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)
(S/S BY NASM16555)
MS16556B(1) NOT 2 PIN, STRAIGHT, HEADLESS (DOWEL), (.001 OVER NOMINAL
SIZE) (S/S BY NASM16556)
MS16562C NOT 2 PIN, SPRING, TUBULAR, SLOTTED (S/S BY NASM16562)
MS16606A PIN, RETAINING, GASKET (NO S/S DOCUMENT)
MS17106B NOT 2 NAIL, RINGED (FETTER RING) (NO S/S DOCUMENT)
MS171401THRUMS171900C NOT 2 PIN - SPRING, CORROSION RESISTANT STEEL (S/S
BY NASM171401THRU171900)
MS17984F NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE
ACTING, BUTTON HANDLE (S/S BY NASM17984)
MS17985G NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE
ACTING, "T" HANDLE (S/S BY NASM17985)
MS17986G NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE
ACTING, "L" HANDLE (S/S BY NASM17986)
MS17987G NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE
ACTING, RING HANDLE (S/S BY NASM17987)
MS17988E NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE
ACTING, "T" HANDLE (S/S BY NASM17988)
MS17989E NOT 1 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE
ACTING, "L" HANDLE (S/S BY NASM17989)
MS17990E NOT 1 PIN, QUICK RELEASE, POSITIVE LOCKING, DOUBLE ACTING, RING
HANDLE (S/S BY NASM17990)
MS20065A NOT 2 KEY, MACHINE, RECTANGULAR IN CROSS-SECTION, BOTH ENDS SQUARE
(S/S BY NASM20065)
MS20066A NOT 2 KEY, MACHINE, SQUARE IN CROSS-SECTION, BOTH ENDS SQUARE
(S/S BY NASM20066)
MS20067A NOT 2 KEY, MACHINE, SQUARE IN CROSS-SECTION, ONE END SQUARE,
OTHER END ROUND (S/S BY NASM20067)
MS20068A NOT 2 KEY, MACHINE, SQUARE IN CROSS-SECTION, BOTH ENDS ROUND
(S/S BY NASM20068)
MS20253E NOT 3 PIN, HINGE (S/S BY SAE-AS20253)
MS20392F NOT 1 PIN, STRAIGHT, HEADED, DRILLED SHANK (S/S BY NASM20392)
MS21261 KEY, WOODRUFF-CHAMFERED (S/S BY MS-35756B)
MS21309A NOT 1 STAPLE, GROUND WIRE (POLE LINE) (NO S/S DOCUMENT)
MS24665F NOT 2 PIN, COTTER (SPLIT) (S/S BY NASM24665)
MS24692D NOT 2 PIN, TAPERED, PLAIN (S/S BY NASM24692)
MS33547C NOT 2 PINS, SPRING, FUNCTIONAL LIMITATIONS OF (S/S BY NASM33547)
MS35386C PIN, LOCK (USE MIL-R-52243)
MS35671A NOT 2 PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, CARBON
STEEL (S/S BY NASM35671)
MS35672B NOT 2 PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVED, CORROSION-RESISTING
STEEL (S/S BY NASM35672)
MS35674A NOT 2 PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, CARBON
STEEL (S/S BY NASM35674)
MS35675B NOT 2 PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, CORROSION-RESISTING
STEEL (S/S BY NASM35675)
MS35676A NOT 1 PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, BRASS
(NO S/S DOCUMENT)
MS35677A NOT 2 PIN, GROOVED, HEADLESS, LONGITUDINAL CENTER GROOVE, CARBON
STEEL (S/S BY NASM35677)
MS35678B NOT 3 PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE, CORROSION-RESISTING
STEEL (S/S BY NASM35678)
MS35679A NOT 1 PIN, GROOVED, HEADLESS, LONGITUDINAL CENTER GROOVE, BRASS
(NO S/S DOCUMENT)
MS35756E NOT 1 KEY, WOODRUFF, STEEL ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS
(S/S BY NASM35756)
MS39086B NOT 2 PIN, SPRING, TUBULAR, COILED, HEAVY DUTY (S/S BY NASM39086)
MS51400 NOT 2 PIN, STRAIGHT, HEADLESS (S/S BY NASM51400)
MS51538 NOT 1 NAIL, MASONRY (S/S BY ASTM-F1667)
MS51539 NOT 1 NAIL, GYPSUM, WALL BOARD (S/S BY ASTM-F1667)
MS51540 NOT 2 NAIL, PALLET (S/S BY ASTM-F1667)
MS51541 NOT 2 NAIL, SINKER (S/S BY ASTM-F1667)
MS51542 NOT 2 NAIL, UNDERLAYMENT (S/S BY ASTM-F1667)
MS51543 NOT 1 NAIL, UNDERLAYMENT (S/S BY ASTM-F1667)
MS51544 NOT 1 NAIL, FLOORING (S/S BY ASTM-F1667)
MS51545 NOT 1 NAIL, FINE (S/S BY ASTM-F1667)
MS51546 NOT 1 NAIL, CORKER (S/S BY ASTM-F1667)
MS51547 NOT 1 NAIL, CONCRETE (S/S BY ASTM-F1667)
MS51548 NOT 2 NAIL, COOLER (S/S BY ASTM-F1667)
MS51549 NOT 2 NAIL, BOX (S/S BY ASTM-F1667)
MS51605B NOT 2 PIN, GROOVED, HEADLESS (HALF LENGTH TAPER GROOVE) CORROSION-RESISTING
STEEL (S/S BY NASM51605)
MS51838 NOT 2 PIN, STRAIGHT, STEEL-DRILL ROD (S/S BY NASM51838)
MS51923C NOT 1 PIN, SPRING-TABULAR, COILED, MEDIUM DUTY (S/S BY NASM51923)
MS51932 NOT 2 PIN, STRAIGHT-HEADLESS, DRILLED FOR COTTER PINS (S/S BY
NASM51932)
MS51987A NOT 1 PIN, SPRING, TUBULAR, COILED, LIGHT DUTY (S/S BY NASM51987)
MS9047A NOT 2 PIN - SPRING, STEEL, PHOSPHATE FINISH (S/S BY MS171401THRUMS171900)
MS9048A NOT 2 PIN - SPRING, STEEL, CADMIUM PLATED (S/S BY MS171401THRUMS171900)
MS90709 NOT 1 NAIL, BOAT (S/S BY ASTM-F1667)
MS90710A NOT 1 NAIL, BRAD TYPE (BRADS, NAILS, CASING, NAILS, FINISHING)
(S/S BY ASTM-F1667)
MS90711A NOT 1 NAIL, CLOUT, CUT (S/S BY ASTM-F1667)
MS90712 NOT 1 NAIL, COMMON, CUT (S/S BY ASTM-F1667)
MS90713A NOT 1 NAIL, COMMON, WIRE (S/S BY ASTM-F1667)
MS90714A NOT 1 NAIL, COMPOSITION ROOFING (S/S BY ASTM-F1667)
MS90715A NOT 1 NAIL, DOUBLE-HEADED (S/S BY ASTM-F1667)
MS90716 NOT 1 NAIL, FOUNDRY (NO S/S DOCUMENT)
MS90717A NOT 2 SPIKES; BARGE AND BOAT (S/S BY ASTM-F1667)
MS90718A NOT 1 SPIKE, COMMON, WIRE (S/S BY ASTM-F1667)
MS90719 NOT 2 STAPLE, CABLE, ELECTRICAN' S
MS90720 NOT 1 STAPLE, FENCE (S/S BY ASTM-F1667)
MS90721 NOT 1 STAPLE, WIRING, ELECTRICAN' S (S/S BY ASTM-F1667)
MS9105B NOT 2 PIN, STRAIGHT, HEADLESS, AMS 5688, LOCK (S/S BY SAE-AS9105)
MS9164B NOT 2 PIN, STRAIGHT, HEADLESS, STEEL, OVERSIZE (S/S BY SAE-AS91641)
MS9245A NOT 2 PIN, COTTER - CRES, AMS 7211 (S/S BY SAE-AS9245)
MS9389 NOT 1 PIN, STRAIGHT, HEADLESS - AMS 5735, LOCK (ASG) (S/S BY SAE-AS9389)
MS9390C NOT 1 PIN, STRAIGHT, HEADLESS--CRES, AMS 5735, DOWEL STANDARD
AND OVERSIZE (S/S BY SAE-AS9390)
MS9462 NOT 2 PIN, STRAIGHT, HEADED-.124 DIAMETER, AMS 5735 (ASG) (S/S
BY SAE-AS9462)
MS9463 NOT 1 PIN, STRAIGHT, HEADED- .186 DIAMETER, AMS 5735 (ASG) (S/S
BY SAE-AS9463)
MS9464 NOT 1 PIN, STRAIGHT, HEADED- .248 DIAMETER, MS 5735 (ASG) (S/S
BY SAE-AS9464)
MS9465 NOT 1 PIN, STRAIGHT, HEADED- .311 DIAMETER, AMS 5735 (ASG) (S/S
BY SAE-AS9465)
MS9466 NOT 1 PIN, STRAIGHT, HEADED-.373 DIAMETER, AMS 5735 (S/S BY SAE-AS9466)
MS9467 NOT 1 PIN, STRAIGHT, HEADED .436 DIAMETER, AMS 5735 (S/S BY SAE-AS9467)
MS9468A NOT 1 PIN, STRAIGHT, HEADED .497 DIAMETER, AMS 5735 (S/S BY SAE-AS9468)
MS9486A NOT 2 PIN, STRAIGHT, HEADLESS - AMS 5132, LOCK (S/S BY SAE-AS9486)
MS9841 NOT 2 KEY, WOODRUFF - CHAMFERED CRES AMS5640 (S/S BY SAE-AS9841)
MS9842 NOT 2 PIN, STRAIGHT, HEADED .0937 DIAMETER, AMS5616 (S/S BY SAE-AS9842)
MS9843 NOT 2 PIN, STRAIGHT, HEADED .1249 DIAMETER, AMS5616 (S/S BY SAE-AS9843)
MS9844 NOT 2 PIN, STRAIGHT, HEADED .1874 DIAMETER, AMS5616 (S/S BY SAE-AS9844)
MS9845 NOT 2 PIN, STRAIGHT, HEADED .2499 DIAMETER, AMS5616 (S/S BY SAE-AS9845)
MS9846 NOT 2 PIN, STRAIGHT, HEADED .3124 DIAMETER, AMS5616 (S/S BY SAE-AS9846)
MS9847 NOT 2 PIN, STRAIGHT, HEADED .3749 DIAMETER, AMS5616 (S/S BY SAE-AS9847)
MS9848 NOT 1 PIN, STRAIGHT, HEADED .4999 DIAMETER, AMS5616 (S/S BY SAE-AS9848)
SAE-AMS7207 PINS, SPRING, TUBULAR, CORROSION AND MODERATE HEAT RESISTANT
STEEL (S/S BY SAE-AS7207)
A-A-55487 针，锁（顺利的PIN ） PIN, LOCK (HITCH PIN)
A-A-55488 针，护，安全 PIN, RETAINING, SAFETY
ASME-B17.2 伍德拉夫钥匙和keyseats WOODRUFF KEYS AND KEYSEATS
ASTM-C514 钉子为应用石膏板 NAILS FOR THE APPLICATION OF GYPSUM BOARD
ASTM-F1667 紧固件，驱动：钉，刺，和Staples FASTENERS, DRIVEN: NAIL, SPIKES, AND STAPLES
FF-P-386D(1) 针， cotter （分裂） PIN, COTTER (SPLIT)
AN123151THRUAN123300 REV 4 NOT 3 RIVET & UNIVERSAL HEAD, HIGH TEMPERATURE,
AMS7229 (S/S BY SAE-AS123151THRUAN123300)
AN123301THRUAN123450 REV 4 NOT 3 RIVET & UNIVERSAL HEAD, HIGH TEMPERATURE,
AMS7232 (S/S BY SAE-AS123301THRUAS123450)
AN123451THRUAN123600 REV 4 NOT 2 RIVET AND COUNTERSUNK HEAD, HIGH TEMPERATURE,
AMS 7229 (S/S BY SAE-AS123460THRUAS123600)
AN123601THRUAN123750 REV 4 NOT 3 RIVET & COUNTERSUNK HEAD, HIGH TEMPERATURE,
AMS7232 (S/S BY SAE-AS123601THRUAS123750)
AN124951THRUAN125100 REV 3 NOT 2 RIVET - 100 DEG. COUNTERSUNK HEAD CORROSION
RESISTANT STEEL (S/S BY SAE-AS124951THRUAS125100)
AN125401THRUAN125550 REV 3 NOT 3 RIVET & UNIVERSAL HEAD, CORROSION
RESISTANT STEEL (S/S BY SAE-AS125401THRUAS125550)
AN125551THRUAN125700 REV 3 NOT 2 RIVET UNIVERSAL HEAD, MILD STEEL (S/S
BY SAE-AS125551THRUAS125700)
AN420 REV 3 NOT 1 RIVET & COUNTERSUNK HEAD (SEE AN427)
AN425 REV 2 MS FITTING CLASSIFICATION OF DEFECTS OF
AN426 RIVET & SOLID, COUNTERSUNK 100 DEG. PRECISION HEAD, ALUMINUM
ALLOY (USE MS20426)
AN435 REV 7 RIVET, ROUND HEAD, STEEL, MONEL AND COPPER (USE MS 20613 AND
MS 20615)
AN441 REV 2 RIVET - FLAT HEAD (MILD STEEL, MONEL AND COPPER) (USE AN435)
AN445 REV 2 RIVET - FLUSH HEAD,
AN450 REV 2 RIVET, TUBULAR (USE MS 16535 AND MS16536)
AN458 REV 4 RIVET - 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE A (S/S BY MS20603)
AN459 REV 4 RIVET - BRAZIER HEAD, BLIND, TYPE A (S/S BY MS20602)
AN460 REV 4 RIVET - 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE B, CLASS 1
(USE NAS1399)
AN461 REV 3 RIVET - BRAZIER HEAD, BLIND, TYPE B, CLASS 1 (USE NAS1398)
AN462 REV 2 RIVET - 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE B, CLASS 2
AN463 REV 1 RIVET & BRAZIER HEAD, BLIND, TYPE B, GLASS 2 (S/S BY MS&20600
AN470 RIVET&UNIVERAL HEAD, ALUMINUM ALLOY (USE MS20470)
ANSI-B18.1.1 RIVET, SMALL SOLID (NO S/S DOCUMENT)
ANSI-B18.1.2 RIVET, LARGE (NO S/S DOCUMENT)
ANSI-B18.7 RIVETS, GENERAL PURPOSE SEMI TUBULAR RIVETS, FULL TUBULAR SPLIT
AND RIVET CAP (NO S/S DOCUMENT)
ASTM-A502 STEEL STRUCTURAL RIVETS (NO S/S DOCUMENT)
DS51403 NOT 1 RIVET, TUBULAR, ROUND AND FLAT TYPE HEAD, METRIC
DS51404 NOT 1 RIVET, SOLID, UNIVERSAL HEAD, BRASS, METRIC
DS51405 NOT 1 RIVET, SOLID, UNIVERSAL HEAD, CARBON STEEL, METRIC
DS51406 NOT 1 RIVET, SOLID, COUNTERSUNK 100 DEGREE PRECISION HEAD, CARBON
STEEL, METRIC
DS51407 NOT 2 RIVET, SOLID, UNIVERSAL HEAD, COPPER, METRIC
DS51408 NOT 1 RIVET, SOLID, COUNTERSUNK 100 DEG. PRECISION HEAD, COPPER,
METRIC
FF-B-571A(1) BOLT, NUTS, STUDS, AND TAP RIVETS (AND MATERIAL FOR SAME)
(S/S BY FF-B-575, FF-B-584, FF-N-836 AND FF-S-1362)
JAN-R-1127 RIVETS, BELT, COPPER, AND BURRS, COPPER (S/S BY MIL-R-2583A)
MIL-DTL-7885/11 NOT 2 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE (TYPE I,
STYLE A, CLASS 1) (S/S BY NAS9301)
MIL-DTL-7885/12 NOT 2 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD,
5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, (TYPE I, STYLE
A, CLASS 2) (S/S BY NAS9302)
MIL-DTL-7885/13 NOT 2 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, (TYPE I,
STYLE A, CLASS 3) (S/S BY NAS9303)
MIL-DTL-7885/14 NOT 2 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE
DIAMETER (TYPE I, STYLE B, CLASS 1) (S/S BY NAS9304)
MIL-DTL-7885/15 NOT 2 RIVETS, BLIND, STRUCTURAL, 100 DE. FLUSH HEAD, 5056
AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE
I, STYLE B, CLASS 2) (S/S BY NAS9305)
MIL-DTL-7885/16 NOT 2 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, 5056
AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE
I, STYLE B, CLASS 4) (S/S BY NAS9306)
MIL-DTL-7885/17 NOT 1 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES
SPINDLE (TYPE I, STYLE A, CLASS 1) (S/S BY NAS9307)
MIL-DTL-7885/18 NOT 1 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD,
NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE,
(TYPE I, STYLE A, CLASS 2) (S/S BY NAS9308)
MIL-DTL-7885/19 NOT 1 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR
HEAD, NICKEL-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, (TYPE
I, STYLE A, CLASS 3) (S/S BY NAS9309)
MIL-DTL-7885/20 NOT 1 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR
HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES
SPINDLE, (TYPE I, STYLE A, CLASS 3) (S/S BY NAS9309)
MIL-DTL-7885/21 NOT 1 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES
SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) (S/S BY NAS9310)
MIL-DTL-7885/22 NOT 1 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, INCO 600 SLEEVE, MECHANICALLY LOCKED INCO X-750 SPINDLE OVERSIZE
DIAMETER (TYPE I, STYLE B, CLASS 1) (S/S BY NAS9310)
MIL-DTL-7885/23 NOT 1 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD,
NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE,
OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 2) (S/S BY NAS9311)
MIL-DTL-7885/24 NOT 1 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD,
INCO 600 SLEEVE, MECHANICALLY LOCKED INCO X-750 SPINDLE, OVERSIZE DIAMETER
(TYPE I, STYLE B, CLASS 2) (S/S BY NAS9311)
MIL-DTL-7885/25 NOT 1 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, NICKEL-COPPER
ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE
I, STYLE B, CLASS 4) (S/S BY NAS9312)
MIL-DTL-7885/26 NOT 1 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, NICKEL-COPPER
ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER
(TYPE I, STYLE B, CLASS 4) (S/S BY NAS9312)
MIL-DTL-7885/27 NOT 2 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE,
(TYPE I, STYLE A, CLASS 3) (S/S BY NAS9303)
MIL-DTL-7885/28 NOT 2 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, 5056
AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE, OVERSIZE
DIAMETER (TYPE I, STYLE B, CLASS 4) (S/S BY NAS9306)
MIL-DTL-7885/2D NOT 2 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED ALLOY STEEL SPINDLE (TYPE
I, STYLE A, CLASS 1) (S/S BY NAS9301)
MIL-DTL-7885/4D NOT 1 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, NICKEL-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE
(TYPE I, STYLE A, CLASS 1) (S/S BY NAS9307)
MIL-DTL-7885/6D NOT 2 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE
OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) (S/S BY NAS9304)
MIL-DTL-7885/8C NOT 1 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING
HEAD, NICKEL-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE
OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) (S/S BY NAS9310)
MIL-F-81177/1 NOT 2 FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED,
ALLOY STEEL, DESIGN AND USAGE LIMITATIONS FOR (S/S BY NASM81177/1)
MIL-F-81177/2 NOT 2 FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED,
THREADED, SELF LOCKING, 100 DEG. FLUSH HEAD, 450 DEG. F, ALLOY STEEL 112
KSI FSU (S/S BY NASM81177/2)
MIL-F-81177/3 NOT 2 FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED,
THREADED, SELF LOCKING, PROTRUDING HEAD, 450 DEG. F, ALLOY STEEL, 112
KSI, FSU (S/S BY NASM81177/3)
MIL-F-81177E(4) NOT 1 FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED,
ALLOY STEEL, GENERAL SPECIFICATION FOR (S/S BY NASM81177)
MIL-F-8975/1A NOT 2 FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED,
CORROSION RESISTANT AND HEAT RESISTANT STEEL AND TITANIUM, DESIGN AND
USAGE LIMITATIONS FOR (S/S BY NASM8975/1)
MIL-F-8975/2A NOT 1 FASTENER, BLIND, HIGH STRENGTH, CORROSION RESISTANT
AND HEAT RESISTANT STEEL, FLUSH HEAD, TYPE II, CLASS I (S/S BY NASM8975/2)
MIL-F-8975/3A NOT 1 FASTENERS, BLIND, TITANIUM, FLUSH HEAD, TYPE II, CLASS
2 (S/S BY NASM8975/3)
MIL-F-8975/4A(1) NOT 1 FASTENERS, BLIND, HIGH STRENGTH, CORROSION RESISTANT
AND HEAT RESISTANT STEEL, PROTRUDING HEAD, TYPE II, CLASS 1 (S/S BY NASM8975/4)
MIL-F-8975/5A NOT 1 FASTENER, BLIND, TITANIUM, PROTRUDING HEAD, TYPE II,
CLASS 2 (S/S BY NASM8975/5)
MIL-F-8975/6 NOT 1 FASTENERS, BLIND, HIGH STRENGTH, TITANIUM/CRES, PROTRUDING
HEAD, TYPE I, CLASS 2 (S/S BY NASM8975/6)
MIL-F-8975/7 NOT 1 FASTENERS, BLIND, HIGH STRENGTH, TITANIUM/CRES, FLUSH
HEAD, TYPE I, CLASS 2 (S/S BY NASM8975/7)
MIL-F-8975B(4) SUP 1 NOT 1 FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION
FORMED, CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM,
GENERAL SPECIFICATION FOR (S/S BY NASM8975)
MIL-P-23469/10 PIN, SWAGE-LOCKING, FLAT HEAD, 90 DEG. COUNTERSUNK, FOUR
LOCKING GROOVE, ALUMINUM ALLOY, CORROSION RESISTANT STEEL AND CARBON STEEL,
CADIMUM COATED (S/S BY MIL-P-23469/6)
MIL-P-23469/11 PIN, SWAGE-LOCKING, OVAL HEAD, 60 DEG. COUNTERSUNK, FOUR
LOCKING GROOVE, CARBON STEEL (USE MIL-P-23469/7)
MIL-P-23469/3B NOT 1 PIN-RIVET, GROOVED, BRAZIER, TRUSS AND FLUSH HEAD;
STRAIGHT SHANK, WIDE GRIP RANGE, MULTIPLE LOCKING GROOVES, ALUMINUM ALLOY
AND CARBON STEEL (NO S/S DOCUMENT)
MIL-P-23469/8 PIN, SWAGE-LOCKING, BRAZIER HEAD, FOUR LOCKING GROOVE, ALUMINUM
ALLOY, CORROSION RESISTANT STEEL AND CARBON STEEL, CADMIUN COATED (S/S
BY MIL-P-23469/2)
MIL-P-23469/9 PIN, SWAGE LOCKING, BUTTON HEAD, FOUR LOCKING GROOVE, ALUMINUM
ALLOY, CORROSION RESISTANT STEEL AND CARBON STEEL, CADMIUM COATED (S/S
BY MIL-P-23469/4)
MIL-P-23470/10A NOT 1 PIN-RIVET, THREADED, BUTTON HEAD, STRAIGHT SHANK,
CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470/11A NOT 1 PIN RIVET, THREADED, 60 DEG. COUNTERSUNK OVAL HEAD,
STRAIGHT SHANK, CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470/12A NOT 1 PIN-RIVET, THREADED, 60 DEGREES COUNTERSUNK OVAL
HEAD, TAPERED SHANK, CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470/13A NOT 1 PIN RIVET, THREADED, 90 DEG. COUNTERSUNK FLAT HEAD,
STRAIGHT SHANK, ALUMINUM ALLOY (NO S/S DOCUMENT)
MIL-P-23470/15A NOT 1 PIN RIVET, THREADED, BUTTON HEAD, TAPERED SHANK
ALUMINUM ALLOY (NO S/S DOCUMENT)
MIL-P-23470/16A NOT 1 PIN RIVET, THREADED, 60 DEGREES COUNTER SUNK OVAL
HEAD, STRAIGHT SHANK, ALUMINUM ALLY (NO S/S DOCUMENT)
MIL-P-23470/17A NOT 1 PIN RIVET, THREADED, 60 DEG. COUNTERSUNK OVAL HEAD,
TAPERED SHANK, ALUMINUM ALLOY (NO S/S DOCUMENT)
MIL-P-23470/18A NOT 1 PIN-RIVET COLLAR, THREADED, TORQUE-OFF, SELF-LOCKING,
CARBON STEEL (NO S/S DOCUMENT)
MIL-P-23470/19A NOT 1 PIN RIVET COLLAR, THREADED, TORQUE OFF, SELF LOCKING
CARBON STEEL (DOUBLE HEX) (NO S/S DOCUMENT)
MIL-P-23470/20A NOT 1 PIN-RIVET COLLAR, THREADED, TORQUE-OFF, SELF-LOCKING
CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470/21A NOT 1 PIN RIVET COLLAR, THREADED, TORQUE OFF, SELF LOCKING,
CORROSION RESISTANT STEEL (DOUBLE HEX) (NO S/S DOCUMENT)
MIL-P-23470/22A NOT 1 PIN-RIVET COLLAR, THREADED, TORQUE-OFF, SELF LOCKING,
ALUMINUM ALLOY (NO S/S DOCUMENT)
MIL-P-23470/23A NOT 1 PIN RIVET COLLAR, THEADED, TORQUE OFF, SELF LOCKING,
ALUMINUM ALLOY (DOUBLE HEX) (NO S/S DOCUMENT)
MIL-P-23470/2A NOT 1 PIN RIVET, THREADED, BUTTON HAD, TAPER ED SHANK,
CORROSION RESISTANT STEEL (NO S/S DOCUMENT)
MIL-P-23470/3A PIN-RIVET, THREADED, NAIL HEAD, STRAIGHT SHANK CORROSION
RESISTANT STEEL
MIL-P-23470/4A PIN-RIVET, THREADED, 90 DEGREES COUNTERSUNK, FLAT HEAD,
STRAIGHT SHANK, CARBON STEEL
MIL-P-23470/5A PIN RIVET, THREADED, BUTTON HEAD, STRAIGHT SHANK, CARBON
STEEL
MIL-P-23470/6A PIN RIVET, THREADED, BUTTON HEAD, TAPERED SHANK, CARBON
STEEL
MIL-P-23470/7A NOT 1 PIN-RIVET, THREADED, 60 DEGREES COUNTERSUNK OVAL
HEAD STRAIGHT SHANK, CARBON STEEL (NO S/S DOCUMENT)
MIL-P-23470/8A NOT 1 PIN-RIVET, THREADED 60 DEGREES COUNTERSUNK OVAL HEAD,
TAPERED SHANK, CARBON STEEL (NO S/S DOCUMENT)
MIL-P-23470/9A PIN RIVET, THREADED, 90 DEG. COUNTERSUNK FLAT HEAD, STRAIGHT
SHANK, CORROSION RESISTANT STEEL
MIL-P-87988 SUP 1 NOT 1 PIN-RIVET, THREADED WITH HEX SOCKET GENERAL SPECIFICATION
FOR (NO S/S DOCUMENT)
MIL-P-87988/1 NOT 1 PIN-RIVET, THREADED, TYPE VI (PROTRUDING SHEAR HEAD),
CLASS 1 (7075 ALUMINUM, 45 KSI FSU AND 75 KSI FTU) (NO S/S DOCUMENT)
MIL-P-87988/10 NOT 1 PIN-RIVET, THREADED, TYPE V (100 DEG. FLUSH MS24694
TENSION HEAD), CLASS 2 (6AL-4V TITANIUM, 95 KSI FSU AND 160 KSI FTU) (NO
S/S DOCUMENT)
MIL-P-87988/11 NOT 1 PIN-RIVET, THREADED, TYPE II (100 DEG. FLUSH REDUCED
SHEAR HEAD), CLASS 2 (6AL-4V TITANIUM, 95 KSI FSU AND 160 KSI FTU) (NO
S/S DOCUMENT)
MIL-P-87988/12 NOT 1 PIN-RIVET, THREADED, TYPE III (100 DEG. FLUSH CROWN
SHEAR HEAD), CLASS 2 (6AL-4V TITANIUM, 95 KSI FSU AND 160 KSI FTU) (NO
S/S DOCUMENT)
MIL-P-87988/13 NOT 1 PIN-RIVET, THREADED, TYPE VI (100 DEG. FLUSH MS20426
SHEAR HEAD) CLASS 2 (6AL-4V TITANIUM, 95 KSI FSU AND 160 KSI FTU) (NO
S/S DOCUMENT)
MIL-P-87988/14 NOT 1 PIN-RIVET, THREADED, TYPE II (100 DEG. FLUSH REDUCED
SHEAR HEAD, CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND
160 KSI FTU) (NO S/S DOCUMENT)
MIL-P-87988/15 NOT 1 PIN-RIVET, THREADED, TYPE I (PROTRUDING TENSION HEAD),
CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND 160 KSI FTU)
(NO S/S DOCUMENT)
MIL-P-87988/16 NOT 1 PIN-RIVET, THREADED, TYPE V (100 DEG. FLUSH MS24694
TENSION HEAD), CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND
160 KSI FTU) (NO S/S DOCUMENT)
MIL-P-87988/17 NOT 1 PIN-RIVET, THREADED, TYPE III (100 DEG. FLUSH CROWN
SHEAR HEAD), CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND
160 KSI FTU) (NO S/S DOCUMENT)
MIL-P-87988/18 NOT 1 PIN-RIVET, THREADED, TYPE IV (100 DEG. FLUSH MS20426
SHEAR HEAD, CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND
160 KSI FTU) (NO S/S DOCUMENT)
MIL-P-87988/19 NOT 1 PIN-RIVET, THREADED, TYPE II (100 DEG. FLUSH REDUCED
SHEAR HEAD, CLASS 5 (ALLOY STEEL, 108 KSI FSU AND 180-200 KSI FTU) (NO
S/S DOCUMENT)
MIL-P-87988/2 NOT 1 PIN-RIVET, THREADED, TYPE IV (100 DEG. FLUSH MS20426
SHEAR HEAD), CLASS 1 (7075 ALUMINUM, 45 KSI FSU AND 75 KSI FTU) (NO S/S
DOCUMENT)
〉〉〉〉〉〉点击索取〈〈〈〈〈〈
MIL分类索引 2
3 4 5
6 7 8
9 10 11
12 13 14
15 16
17 18 19
20 21 22
23 24
25 26 27
28 29 30
31 32 33
34 35 36
37 38
39 40 41
42 43 44
45 46 47
48 49 50
51 52 53
54 55 56
57 58 59
60 61 62
63 64 65
66 67
68 69
70 71 72
73 74 75
76 77 78
79 80 81
82 83 84
85 86 87
88 89 90
91 92 93
94 95 96
97 98 99
100 101 102
103 104 105
106 107 108
109 110 111
112 113 114
115 116 117
118 119 120
121 122 123
124 125 126
127 128 129
130 131 132
133 134 135
136 137 138
139 140 141
142 143 144
145 146 147
148 149 150
151 152 153
154 155 156
157 158 159
160 161 162
163 164 165
166 167 168
169 170 171
172 173 174
175 176 177
178 179 180
181 182 183
|
