畅销书下载

DOD美国国防部文件（含MIL美国军用标准）及相关标准文献中英文对照目录183页.......(定题浏览)

这个合集包括已经被美国国防部采用，代替相同内容的书面文件或取代先前军事技术规范的行业标准。这些标准来自二十多个组织，其中包括 ACI（美国混凝土协会）、AGMA（美国齿轮制造商协会）、AIA/NAS（美国航天工业协会——国家航天标准）、ANSI（美国国家标准协会）、API（美国石油学会）、ARI（美国空调与制冷协会）、ASME（美国机械工程师协会）、AWWA（美国给水工程协会）、CGA（压缩气体协会）、EIA（电子工业协会）、IEEE（电气电子工程师协会）、IPC（电子电路互联和封装协会）、MSS（美国阀门装置制造标准化协会）、NEMA（美国国家电器制造商协会）、NFPA（美国消防协会）、SAE（美国机动工程师协会）、UL（美国保险商实验室）。

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

MS9058D NOT 1 RING BACK UP, BOSS CONNECTION, AMS 3652, AMS 3656, AMS 3660, AMS 3667 (S/S BY SAE-AS9058)
MS9068 NOT 3 PACKING, PREFORMED - AMS 3304, O RING (ASG) (S/S BY SAE-AS3582)
MS9134 NOT 1 GASKET - TYPE X OR XV ENGINE ACCESSORY DRIVE (S/S BY AS3491)
MS9135 NOT 1 GASKET, TYPE XI ENGINE ACCESSORY DRIVE (S/S BY AS3492)
MS9136 NOT 1 GASKET - TYPE XII, XIV-A, XIV-B, XIV-E, XVII-A AND XVII-B ENGINE ACCESSORY DRIVE (S/S BY AS3493)
MS9137 NOT 1 GASKET - TYPE XIII ENGINE ACCESSORY DRIVE (S/S BY AS3494)
MS9138 NOT 1 GASKET - TYPE XIV-C AND XIV-D ENGINE ACCESSORY DRIVE (S/S BY AS3495)
MS9139 NOT 1 GASKET - TYPE XVI, XVII-C, -D, -E AND -F ENGINE ACCESSORY DRIVE (S/S BY AS3496)
MS9140A NOT 1 GASKET - TYPE X1X ENGINE ACCESSORY DRIVE (S/S BY SAE-AS3497)
MS9141(1) NOT 1 GASKET - METAL O-RING, .035 TUBE X .006 WALL, CRES (S/S BY SAE-AS9141)
MS9142A(1) NOT 2 GASKET - METAL O-RING, .062 TUBE X .006 WALL, CRES (S/S BY SAE-AS9142)
MS9144A NOT 2 GASKET - TYPE XX ENGINE ACCESSORY DRIVE (S/S BY SAE-AS9144)
MS91607B NOT 1 GASKET, SERIES LC CONNECTORS (NO S/S DOCUMENT)
MS91608 GASKET, SERIES LC CONNECTORS
MS91609 GASKET, SERIES LC CONNECTORS
MS9202A(1) NOT 3 GASKET - METAL O-RING, .062 TUBE X .010 WALL (S/S BY SAE-AS9202)
MS9203A(2) NOT 3 GASKET - METAL O-RING, .094 TUBE X .006 WALL, CRES (S/S BY SAE-AS9203)
MS9204A(1) NOT 1 GASKET - METAL 0-RING, .094 TUBE X .010 WALL, CRES (S/S BY SAE-AS9204)
MS9205A(1) NOT 1 GASKET - METAL 0-RING, .125 TUBE X .010 WALL, CRES (ASG) (S/S BY SAE-AS9205)
MS9241D NOT 1 PACKING, PREFORMED - RUBBER, O RING (S/S BY SAE-AS3551)
MS9355 NOT 1 PACKING, PREFORMED, O RING (S/S BY SAE-AS3551)
MS9371A(1) NOT 1 GASKET - METAL O-RING, .035 TUBE X .006 WALL, SILVER PLATED (S/S BY SAE-AS9371)
MS9372A(1) NOT 1 GASKET - METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED (S/S BY SAE-AS9372)
MS9373A(1) NOT 1 GASKET - METAL O-RING, .062 TUBE X .010 WALL SILVER PLATED (S/S BY SAE-AS9373)
MS9374A(1) NOT 2 GASKET - METAL O-RING, .094 TUBE X .006 WALL, SILVER PLATED (S/S BY SAE-AS9374)
MS9375A(1) NOT 1 GASKET - METAL O-RING, .094 TUBE X .010 WALL, SILVER PLATED (S/S BY SAE-AS9375)
MS9376A(1) NOT 1 GASKET - METAL O-RING, .125 TUBE X .010 WALL, SILVER PLATED (S/S BY SAE-AS9376)
MS9377A NOT 1 GASKET - ENGINE ACCESSORY DRIVE (S/S BY SAE-AS3498)
MS9385A NOT 2 PACKING, PREFORMED, AMS 7267, O-RING (S/S BY SAE-AS9385)
MS9386B NOT 1 PACKING, PREFORMED - AMS 7267, (O) RING (S/S BY SAE-AS9386)
MS9387A NOT 2 PACKING, PREFORMED, AMS 7278, "O-RING" (S/S BY MIL-R-83248/1)
MS9388B NOT 2 PACKING, PREFORMED, AMS 7278, O-RING (S/S BY MIL-R-83248/1)
MS9484B RING-BACK-UP, BOSS CONNECTION, AMS 3651 (SEE DWG MS9058)
MS9770 NOT 2 PACKING, PREFORMED - AMS 3650 (S/S BY SAE-AS9770)
MS9771 NOT 3 PACKING, PREFORMED - AMS 3650, SEAL (S/S BY SAE-AS9771)
MS9772 NOT 2 PACKING, PREFORMED - AMS 3617, ,O, RING (S/S BY SAE-AS9772)
MS9773 PACKING, PREFORMED - AMS 3617, SEAL (NO S/S DOCUMENT)
MS9955 NOT 2 PACKING, PREFORMED - AMS 3668, ,O, RING (S/S BY SAE-AS9955)
MS9956 NOT 1 PACKING, PREFORMED - AMS 3668, SEAL (S/S BY SAE-AS9956)
MS9966 NOT 2 PACKING, PREFORMED - AMS 7273 SEAL (S/S BY SAE-AS9966)
MS9967 NOT 2 PACKING, PREFORMED - AMS 1273, ,O, RING (S/S BY SAE-AS9967)
MS9970 NOT 2 PACKING, PREFORMED - AMS 7279, O RING (S/S BY SAE-AS3581)
QPL-16265-15 GASKET, METALLIC-ASBESTOS, SPIRAL-WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
QPL-16374-23 PACKING MATERIAL (METAL COVERED FOR STERN TUBES)
QPL-16685-7 NOT 1 PACKING, PREFORMED (STUFFING-TUBE FOR ELECTRIC CABLES-SHIPBOARD USE) (NO S/S DOCUMENT)
QPL-17303-46 NOT 1 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
QPL-17349-11 PACKING MATERIAL, ROD, HIGH-PRESSURE, ASBESTOS
QPL-17350-8 PACKING MATERIAL, SEMIMETALLIC (SYMBOL 1400)
QPL-17416-18 NOT 1 PACKING MATERIAL, METALLIC, FLEXIBLE (SYMBOL 1430) (NO S/S DOCUMENT)
QPL-17472-30 NOT 1 ASBESTOS SHEET, COMPRESSED (GASKET MATERIAL) (NO S/S DOCUMENT)
QPL-18469-2 PACKING, ASBESTOS, WATER JACKET
QPL-18586-11 GASKETS, 0-RING, SHIPBOARD ELECTRICAL JUNCTION BOX
QPL-19152-3 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC COUNTER-RECOIL SYSTEMS OF GUN MOUNTS)
QPL-20084-5 PACKING, RAMIE-FIBER (SYMBOL 1290)
QPL-20241-26 NOT 1 GASKET MATERIAL, WOOL FELT, IMPREGNATED ADHESIVE, PRESSURE-SENSITIVE (NO S/S DOCUMENT)
QPL-21032-9 GASKETS, METALLIC-ASBESTOS, SPIRAL WOUND (FOR ASA COMMERCIAL FLANGED JOINTS IN PIPING SYSTEMS)
QPL-21099-32 NOT 1 PACKING ASSEMBLIES, HYDRAULIC CONICAL AND V TYPES FIRE RESISTANT TYPE HYDRAULIC FLUIDS (NO S/S DOCUMENT)
QPL-21569-13 GASKET, CYLINDER LINER SEAL O-RING, SYNTHETIC RUBBER
QPL-21610-5 NOT 1 GASKET, HEAT EXCHANGER, VARIOUS CROSS SECTION RING, SYNTHETIC RUBBER (NO S/S DOCUMENT)
QPL-24102 NOT 1 GASKET AND PACKING MATERIAL, RUBBER, RESISTANT TO PETROLEUM-BASE LUBRICANTS, FOR USE IN AIR SYSTEMS UP TO 6,000 PSIG PRESSURE
QPL-25897-12(2) RUBBER, HIGH TEMPERATURE, FLUID RESISTANT
QPL-2765-24 RUBBER SHEET, STRIP, EXTRUDED, AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
QPL-2911-23 NOT 1 PACKING ASSEMBLY, HYDRAULIC CONICAL AND V TYPES (NO S/S DOCUMENT)
QPL-3533-9 NOT 1 RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED
QPL-432-18 WASHERS, NONMETALLIC, DRUM PLUG, SYNTHETIC RUBBER
QPL-45005-14 NOT 1 SEAL, PLAIN AND SEAL, PLAIN, ENCASED: FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER, SPRING LOADED (NO S/S DOCUMENT)
QPL-5315-23 NOT 1 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT (NO S/S DOCUMENT)
QPL-534-10 PACKING, COIL-FORM, STUFFING-TUBE AND TERMINAL-TUBE (FOR ELECTRIC CABLES)
QPL-5510-17 NOT 2 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE I HYDRAULIC (-65 DEG. TO 160 DEG.F) (S/S BY QPL-AMS-P-5510)
QPL-5516-17 NOT 1 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEG. F (NO S/S DOCUMENT)
QPL-7021-9 ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER, AND HIGH TEMPERATURE RESISTANT GASKETS
QPL-83248-3 NOT 1 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT (NO S/S DOCUMENT)
QPL-83461-6 NOT 1 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) (REFER TO PRI-QPL-AMS-83461-2)
QPL-87175-6 NOT 1 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLOUROELASTOMER (NO S/S DOCUMENT)
QQ-L-156(1) LEAD, CALKING (USE QQ-C-40)
SAE-AMS3217/6 TEST SLABS, PHOSPHONITRILIC FLUOROELASTOMER (FZ) 65 - 75 (NO S/S DOCUMENT)
SAE-AMS3252 RUBBER AND CORK COMPOSITION, SYNTHETIC GENERAL PURPOSE, FIRM (NO S/S DOCUMENT)
SAE-AMS3335 SILICONE RUBBER EXTREME LOW-TEMPERATURE RESISTANT 45-55
SAE-AMS7261 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT (NO S/S DOCUMENT)
SAE-AMS7261/1 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 65-75 (NO S/S DOCUMENT)
SAE-AMS7261/2 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 75-85 (NO S/S DOCUMENT)
SAE-AMS7261/3 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 85-95 (NO S/S DOCUMENT)
SAE-AMS7262 RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 58 - 95 (NO S/S DOCUMENT)
SAE-AMS7265 RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 75 - 85 (NO S/S DOCUMENT)
SAE-AMS7284 RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL-RESISTANT (NO S/S DOCUMENT)
SAE-AMS7284/1 RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 65 - 75 SHORE A (NO S/S DOCUMENT)
SAE-AMS7284/2 RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 75 - 85 SHORE A (NO S/S DOCUMENT)
T-C-30 CALKING COTTON (USE T-O-56)
A-A-52302 NOT 1 垫片，分裂积分，为内陆石油分配系统（ ipds ）管理单元的联合耦合 GASKET, SPLIT INTEGRAL, FOR INLAND PETROLEUM DISTRIBUTION SYSTEM (IPDS) SNAP-JOINT COUPLING
A-A-52481 垫片，橡胶制品，合成 GASKET, RUBBER, SYNTHETIC
A-A-52524/1 NOT 1 印章，平原外包：单密封会员，春季装 SEAL, PLAIN ENCASED: SINGLE SEALING MEMBER, SPRING LOADED
A-A-52524/11 NOT 2 印章，平原外包：一认为，加一皮革或合成橡胶密封会员弹簧加载 SEAL, PLAIN ENCASED: ONE FELT, PLUS ONE LEATHER OR SYNTHETIC ELASTOMER SEALING MEMBER SPRING LOADED
A-A-52524/13A 印章，平原或盖章，平原外包：非弹簧加载，单密封会员 SEAL, PLAIN OR SEAL, PLAIN ENCASED: NON-SPRING LOADED, SINGLE SEALING MEMBER
A-A-52524/17A 印章，平原或盖章，平原外包：单密封会员，扩大案件 SEAL, PLAIN OR SEAL, PLAIN ENCASED: SINGLE SEALING MEMBER, EXTENDED CASE
A-A-52524/6 NOT 1 印章，平原外包：单印章，外部类型，弹簧加载 SEAL, PLAIN ENCASED: SINGLE SEAL, EXTERNAL TYPE, SPRING LOADED
A-A-52524/7A 印章，平原外包：双密封，内部密封的弹簧加载 SEAL, PLAIN ENCASED: DUAL SEAL, INTERNAL SEAL SPRING LOADED
A-A-52524/8 NOT 1 印章，平原外包：双密封的成员，反对，一密封的弹簧加载 SEAL, PLAIN ENCASED: DUAL SEALING MEMBERS, OPPOSED, ONE SEAL SPRING LOADED
A-A-52524A 印章，平原，和印章，平原，外包：流体，径向，单因素和多唇密封会员 SEAL, PLAIN, AND SEAL, PLAIN, ENCASED: FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER
ASME-B16.20 垫圈，金属，管法兰-环联合，螺旋伤口，并夹套 GASKETS, METALLIC, FOR PIPE FLANGES - RING-JOINT, SPIRAL-WOUND, AND JACKETED
ASME-B16.21 垫圈，扁平，非金属，管法兰 GASKETS, FLAT, NONMETALLIC, FOR PIPE FLANGES
ASTM-C509 垫片和密封材料，预制，弹性蜂窝 GASKET AND SEALING MATERIAL, PREFORMED, ELASTOMERIC CELLULAR
ASTM-C542 垫圈，锁带 GASKETS, LOCK-STRIP
ASTM-C564 橡胶垫片铸铁土管及配件 RUBBER GASKETS FOR CAST IRON SOIL PIPE AND FITTINGS
ASTM-C864 垫圈，密封，设置大厦，和间隔，密集的弹性压缩 GASKETS, SEAL, SETTING BLOCKS, AND SPACERS, DENSE ELASTOMERIC COMPRESSION
ASTM-C964 垫片，锁带，玻璃 GASKET, LOCK-STRIP, GLAZING
ASTM-D1869 戒指，橡胶，石棉水泥管 RINGS, RUBBER, FOR ASBESTOS-CEMENT PIPE
ASTM-F104 材料，垫圈，非金属 MATERIALS, GASKET, NONMETALLIC
ASTM-F146 流体阻力的垫片材料 FLUID RESISTANCE OF GASKET MATERIALS
ASTM-F147 灵活的非金属垫片材料 FLEXIBILITY OF NON-METALLIC GASKET MATERIALS
ASTM-F152 张力测试非金属垫片材料 TENSION TESTING OF NONMETALLIC GASKET MATERIALS
ASTM-F2087 包装，玻璃纤维，编织，绳索和芯 PACKING, FIBERGLASS, BRAIDED, ROPE AND WICK
ASTM-F36 压缩和复原的垫片材料 COMPRESSIBILITY AND RECOVERY OF GASKET MATERIALS
ASTM-F37 垫片材料，封闭 GASKET MATERIALS, SEALABILITY OF
ASTM-F38 垫片材料，蠕变放宽1 GASKET MATERIAL, CREEP RELAXATION OF A
ASTM-F477 橡胶密封件（垫圈）加入塑料管材 ELASTOMERIC SEALS (GASKETS) FOR JOINING PLASTIC PIPE
ASTM-F607 垫片材料，金属表面，粘附 GASKET MATERIALS TO METAL SURFACES, ADHESION OF
DIN3760 旋转轴唇密封 ROTARY SHAFT LIP SEALS
F-F-351/6 垫圈：过滤器，流体压力 GASKETS: FILTER, FLUID PRESSURE
HH-G-156E 垫片材料，一般用途;橡胶板，带，及特殊形状 GASKET MATERIAL, GENERAL PURPOSE; RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES
HH-P-151F NOT 1 包装，橡胶板，布插入 PACKING; RUBBER-SHEET, CLOTH-INSERT
HH-P-31F 包装材料，石棉，金属布和磁带 PACKING MATERIAL, ASBESTOS, METALLIC CLOTH AND TAPE
HH-P-46E(2) NOT 1 包装;石棉，资产负债表，压缩 PACKING; ASBESTOS, SHEET, COMPRESSED
MIL-A-24058A(1) 石棉包装＆ gasketing材料，浸渍（受管制的分布） ASBESTOS PACKING & GASKETING MATERIAL, IMPREGNATED (CONTROLLED DISTRIBUTION)
MIL-D-24709 分布式绝缘材料类型r-50-21/64 DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64
MIL-DTL-20078D 垫片，弹道门和舱口 GASKET, FOR BALLISTIC DOORS AND HATCHES
MIL-DTL-22050E 垫圈和包装材料，橡胶制品，使用极性液体，蒸汽和空气在高温天气温和 GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES
MIL-DTL-24130/1E 金属密封环，非整数镍铬铁合金（ uns6600 ） METALLIC SEAL RINGS, NON-INTEGRAL NICKEL-CHROMIUM-IRON ALLOY (UNS6600)
MIL-DTL-25988C 橡胶，氟橡胶，石油和燃料耐，床单，带，成型零件，挤压和形状 RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
DS22125 NOT 3 PACKING, PREFORMED, TUBE-FITTING, METRIC (NO S/S DOCUMENT)
MIL-P-83461/1B NOT 2 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEGREE F (135 DEGREE C) SIZES AND TOLERANCES (S/S BY SAE-AMS-P-83461/1)
MIL-P-83461/2 NOT 2 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) FOR USE IN BOSS FITTINGS, SIZES AND TOLERANCES (S/S BY SAE-AMS-P-83461/2)
MIL-R-83248/1A NOT 4 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT (O-RINGS, CLASS 1, 75 HARDNESS) (S/S BY SAE-AS3208, SAE-AMS7276, AND SAE-AS3209)
MIL-R-83248/2(1) NOT 4 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT (O-RINGS, CLASS 2, 90 HARDNESS) (S/S BY SAE-AS3581 AND SAE-AMS7259)
MIL-R-83412/1 NOT 4 RUBBER, ETHYLENE-PROPYLENE, HYDRAZINE RESISTANT, O-RINGS SIZES AND TOLERANCES (S/S BY SAE-AMS-R-83412/1)
MIL-R-83485/1 NOT 4 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES (S/S BY SAE-AMS-R-83485/1)
MS28775E NOT 3 PACKING, PREFORMED, HYDRAULIC, +275 DEG. F ("O" RING) (S/S BY SAE-AS28775)
MS28778C NOT 1 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS (S/S BY SAE-AS28778)
MS28900A(1) NOT 1 PACKING, PREFORMED, FOR ELECTRICAL USE
MS29512C NOT 3 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, TUBE FITTING, "O" RING (S/S BY SAE-AS29512)
MS29513C NOT 3 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING (S/S BY SAE-AS29513)
MS29561A NOT 1 PACKING, PREFORMED, O RING, SYNTHETIC LUBRICANT RESISTANT (S/S BY SAE-AS29561)
A-A-55549 NOT 2 包装，预制，圆（使用与波导法兰） PACKING, PREFORMED, ROUND (FOR USE WITH WAVEGUIDE FLANGES)
A-A-1035A NOT 1 WIRE FABRIC, (HARDWARE) (S/S BY ASTM-A740)
A-A-1036C NOT 1 WIRE FABRIC (INSECT SCREENING) (NO S/S DOCUMENT)
A-A-1037B NOT 1 WIRE FABRIC, (INDUSTRIAL) (USE ANSI/AWCI-01-1992 FOR FUTURE PROCUREMENTS)
A-A-2211 NOT 1 WIRE FABRIC, STEEL, WELDED (FOR CONCRETE REINFORCEMENT) (S/S BY ASTM-A185)
MIL-C-18675 CLOTH, WIRE-SCREEN, PHOSPHOR-BRONZE (USE RR-W-360)
MIL-W-19926 WIRE FABRIC, STEEL WELDED (FOR REINFORCEMENT) (USE RR-W-375)
MIL-W-36369A NOT 1 WIRE FABRIC (S/S BY A-A-54726)
MIL-W-585E NOT 1 WIRE FABRIC: STEEL, WELDED (S/S BY ASTM-A185 AND ASTM-A740)
MS39129B WIRE FABRIC & INSECT SCREENING (S/S BY RR-W-365)
RR-C-440 NOT 1 CLOTH, WIRE, INDUSTRIAL (S/S BY RR-W-360)
RR-C-451A CLOTH; WIRE, SCREEN (S/S BY RR-S-141)
RR-S-141A SCREENING, WIRE, INSECT (S/S BY RR-W-365)
RR-W-00380 WIRE FABRIC, (FOR SURGICAL USE) (USE GG-S-641)
RR-W-360A NOT 1 WIRE FABRIC, INDUSTRIAL (TYPE I AND TYPE III S/S BY A-A-1037; TYPES II, IV, V OR VI S/S BY ASTM-E437)
RR-W-365A(I1) NOT 1 WIRE FABRIC (INSECT SCREENING) (NO S/S DOCUMENT)
RR-W-370B NOT 1 WIRE FABRIC, STEEL, HOT-DIPPED GALVANIZED (S/S BY A-A-1035 OR ASTM-A740)
RR-W-375A(1) NOT 1 WIRE FABRIC, STEEL, WELDED (FOR REINFORCING CONCRETE) (S/S BY A-A-2211)
A-A-54726 丝织物（外科用） WIRE FABRIC (FOR SURGICAL USE)
ASTM-A740 布，硬体， （梭织或焊接镀锌钢丝织物） CLOTH, HARDWARE, (WOVEN OR WELDED GALVANIZED STEEL WIRE FABRIC)
ASTM-A884/A884M 钢板， 9 ％ ，镍合金，压力容器，生产的直接淬火工艺 STEEL PLATES, 9 PERCENT NICKEL ALLOY, FOR PRESSURE VESSELS, PRODUCTED BY THE DIRECT-QUENCHING PROCESS
ASTM-E437 丝布和屏幕， （广场开幕系列） ，工业 WIRE CLOTH AND SCREENS, (SQUARE OPENING SERIES), INDUSTRIAL
A-A-1012 NOT 1 CASTER, SWIVEL (INDUSTRIAL DUTY) (NO S/S DOCUMENT)
A-A-1013 NOT 1 LOCK OFFICE MACHINE (NO S/S DOCUMENT)
A-A-1039 NOT 1 SEAL, ANTIPILFERAGE (NO S/S DOCUMENT)
A-A-1040B NOT 1 KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) (NO S/S DOCUMENT)
A-A-1191 STRAP, RETAINING (NO S/S DOCUMENT)
A-A-1192A NOT 1 HANGER, PIPE (S/S BY MSS-SP58)
A-A-1193A NOT 1 HANGER, PICTURE (MAGNETIC) (NO S/S DOCUMENT)
A-A-1194A NOT 1 GLIDE, FURNITURE (NO S/S DOCUMENT)
A-A-1196 NOT 1 CUP FURNITURE (NO S/S DOCUMENT)
A-A-1384A NOT 2 HOLDER, DOOR (S/S BY ANSI-A156.16)
A-A-1718A NOT 1 MAGNETIC STRIP (NO S/S DOCUMENT)
A-A-1721A NOT 2 HOOK, COAT AND HAT (ROBE HOOK, BATHROOM) (NO S/S DOCUMENT)
A-A-1926A CLOSER, DOOR (S/S BY BHMA A156.4)
A-A-1927D NOT 1 PADLOCK (S/S BY A-A-59486 OR A-A-59487)
A-A-1930A PADLOCK (DISK OR BLADE TUMBLER) (S/S BY ASTM-F883)
A-A-1931A LOCK SET, BORED (S/S BY ANSI/BHMA A156.2)
A-A-1932A NOT 1 LOCK SET, RIM (S/S BY BHMA-A156.5)
A-A-1951 NOT 1 PADLOCK (HIGH SECURITY) (REFER TO MIL-L-29151 AND ASTM F883)
A-A-2114 NOT 2 CASTER, RIGID (INDUSTRIAL DUTY) (S/S BY A-A-55617)
A-A-218A NOT 1 HINGE, BUTT (GENERAL PURPOSE) (S/S BY ANSI-A156.1)
A-A-219A NOT 1 HINGE, BUTT (CABINET) (S/S BY ANSI-A156.9)
A-A-220A NOT 1 HINGE, BUTT (SPRING) (S/S BY ANSI-A156.17)
A-A-224C NOT 1 HINGE, TEE (S/S BY ANSI-A156.20)
A-A-225C NOT 1 HINGE, STRAP (S/S BY ANSI-A156.20)
A-A-226A NOT 1 HINGE, BUTT (TRANSOM) (S/S BY ANSI-A156.1)
A-A-2738 NOT 2 SEALS, ANTIPILEFRAGE (NO S/S DOCUMENT)
A-A-3068 NOT 1 STONES, SHARPENING (NO S/S DOCUMENT)
A-A-462C NOT 1 HOOK AND EYE, DOOR (NO S/S DOCUMENT)
A-A-465A NOT 1 BRACKET, SHELF (S/S BY ANSI/BHMA A156.16)
A-A-466A BOLT, BARREL (S/S BY ANSI/BHMA A156.16)
A-A-472A NOT 1 HASP, HINGED (S/S BY BHMA A156.20)
A-A-480A NOT 1 BOLT, CHAIN (S/S BY BHMA-A156.14)
A-A-556A NOT 2 STRAP, WEBBING (NO S/S DOCUMENT)
A-A-56011 NOT 2 HANDLE, FOLDING, MALE 90 DEG. DETENT
A-A-56012 NOT 2 HANDLE, FOLDING, FEMALE 90 DEG. DETENT
A-A-56013 NOT 2 HANDLE, FOLDING, MALE 90 DEG. DETENT
A-A-56014 NOT 2 HANDLE, FOLDING, MALE 65 DEG. DETENT
AN100039 REV 2(1) NOT 1 COVER-TYPE XIII ENGINE ACCESSORY DRIVE
AN100044 REV 4 COVER - TYPE XVI, XVII - C, D, E AND F ENGINE ACCESSORY DRIVE
AN130 REV 1 TURNBUCKLE ASSEMBLY & CABLE EYE AND FORK
AN135 REV 2 TURNBUCKLE ASSEMBLY & CABLE EYE AND PIN EYE
AN140 REV 1 TURNBUCKLE ASSEMBLY & CABLE EYE (SUPERSEDES USAF DWG. 037997)
AN145 REV 3 TURNBUCKLE ASSEMBLY, PIN EYE AND SWAGING TERMINAL
AN146 REV 1 TURNBUCKLE ASSEMBLY & FORK AND SWAGING TERMINAL
AN147 REV 2 TURNBUCKLE ASSEMBLY & SWAGING TERMINALS
AN150 TURNBUCKLE ASSEMBLY & FORK
AN155 BARREL, TURNBUCKLE (USE MS 21251)
AN161 REV 9 FORK TURNBUCKLE (USE MS21252)
AN162 REV 5 FORK - TURNBUCKLE, FOR BEARING (USE MS21253)
AN165 REV 9 EYE AIRCRAFT TURNBUCKLE, FOR PIN (USE MS21254)
AN170 REV 10 EYE - AIRCRAFT TURNBUCKLE, FOR CABLE (USE MS21255)
AN250 REV 1 HINGE & BUTT
AN251 REV 7 HINGE - CONTINUOUS
AN252 REV 1 HINGE, STRUCTURAL, EXTRUDED (S/S BY MS20001)
AN253 REV 6 PIN, HINGE (NO S/S DOCUMENT)
AN257 REV 1 HINGE - CONTINUOUS (USE MS-20257)
AN4042 REV 1 PLUG & SPARK PLUG HOLE (18MM&1.5MM PITCH)
AN481 REV 7 CLEVIS-ROD END (USE MS 27976)
AN486 REV 6 CLEVIS, ROD END ADJUSTING (S/S BY MS-27975)
AN490 REV 8 NOT 2 ROD END- THREADED, AIRCRAFT (S/S BY SAE-AS49011)
AN5808 CLAMPS AIRCRAFT INSTRUMENTS (USE MS28042)
AN665 REV 4 NOT 3 TERMINAL-THREADED CLEVIS TYPE TIE ROD
AN671 REV 2 TIE ROD - STREAMLINE (6-40)
AN673 REV 2 TIE ROD & STREAMLINE (NO. 10&32)
AN674 REV 2 TIE ROD & STREAMLINE (1-4&28)
AN675 REV 2 TIE ROD & STREAMLINE (5-16&24)
AN676 REV 2 TIE ROD & STREAMLINE (3-8&24)
AN677 REV 2 TIE ROD & STREAMLINE (7-16&20)
AN678 REV 2 TIE ROD & STREAMLINE (1-2&20)
AN679 REV 3 TIE ROD & STREAMLINE (9-16&18)
AN680 REV 2 TIE ROD & STREAMLINE (5-8&18)
AN682 REV 2 TIE ROD & STREAMLINE (3-4&16)
AN684 REV 2 TIE ROD & STREAMLINE (7-8&14)
AN686 REV 2 TIE ROD & STREAMLINE (1&14)
AN701 REV 4 TIE ROD & INTERNAL 1000 LB (NO. 6&40) (NO S/S DOCUMENT)
AN703 REV 4 NOT 1 TIE ROD & INTERNAL 2100 LB (NO. 10-32) (NO S/S DOCUMENT)
AN704 REV 4 NOT 1 TIE ROD & INTERNAL 3400 LB (1-4-28) (NO S/S DOCUMENT)
AN705 REV 4 TIE ROD & INTERNAL 6100 LB (5-16&24) (NO S/S DOCUMENT)
AN706 REV 3 NOT 2 TIE ROD AND INTERNAL 8000 LB (3-8 AND 24)
AN707 REV 4 TIE ROD - INTERNAL 11,500 LB (7/16 - 20) (NO S/S DOCUMENT)
AN708 REV 4 TIE ROD - INTERNAL 15,500 LB (1/2 - 20) (NO S/S DOCUMENT)
AN735 REV 5 NOT 2 CLAMP, LOOP TYPE BONDING (S/S BY SAE-AS7351)
AN742 REV 12(1) CLAMP, LOOP, PLAIN, SUPPORT, AIRCRAFT
AN743 REV 7 NOT 1 BRACKET, SUPPORT CLAMP (S/S BY SAE-AS7431)
AN750 REV 6 CLIP & TUBE & OPEN TYPE
AN8008 INSULATOR & VIBRATION
AN996 REV 2(1) RING - LOCK
AND10069 CASING ASSEMBLY - INSTALLATION OF CONTROL FLEXIBLE
DOD-P-70330 NOT 1 PLUG, EXPANSION, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
DOD-P-70330/1 NOT 1 PLUG, EXPANSION, CARBON STEEL, METRIC (NO S/S DOCUMENT)
DOD-P-70330/2 NOT 2 PLUG, EXPANSION, CRES, METRIC (NO S/S DOCUMENT)
DOD-P-70330/3 NOT 2 PLUG, EXPANSION, ALUMINUM ALLOY, METRIC (NO S/S DOCUMENT)
DS14241A NOT 2 CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC (S/S BY SAE-MA14241)
DS14242A NOT 3 CLAMP, LOOP, CUSHIONED, CENTER MOUNTING, METRIC (S/S BY SAE-MA14242)
DS14243 NOT 2 CLAMP, LOOP, NYLON, METRIC (S/S BY SAE-AS14232)
DS14244 NOT 2 CLAMP, LOOP TYPE, BONDING, METRIC (S/S BY SAE-AS14244)
DS14269 NOT 2 HINGE, CONTINUOUS, METRIC
DS14270 NOT 1 PIN HINGE, METRIC
DS14272 NOT 2 CLAMP, LOOP, CUSHIONED ELONGATED, METRIC (S/S BY SAE-MA14272)
DS14273 NOT 2 STRAP, RETAINING, CUSHIONED, RECTANGULAR, METRIC
DS14289 NOT 2 STRAP, RETAINING, CUSHIONED, RECTANGULAR, TWO PIECE, METRIC (S/S BY NASM14289)
DS14290 NOT 3 CLAMP, LOOP, CUSHIONED, RECTANGULAR, METRIC (S/S BY NAM14290)
DS14298 NOT 2 CLAMP ASSEMBLY, CUSHIONED SADDLE, METRIC (S/S BY SAE-MA14298)
DS14487 NOT 2 CLAMP, LOOP, PLASTIC, WIRE SUPPORT, METRIC (S/S BY SAE-AS14487)
DS14488 NOT 1 CLAMP, LOOP, PLASTIC, WIRE SUPPORT, RIBBED INNER DIAMETER, METRIC (S/S BY SAE-AS14244)
DS14489 NOT 2 CLAMP, LOOP, METAL, PLAIN, SUPPORT, AIRCRAFT,METRIC (S/S BY SAE- MA14489)
DS21445A PLUG, EXPANSION, TAPERED METRIC (NO S/S DOCUMENT)
FF-C-00460 CLOSER, DOOR
FF-C-77C(1) NOT 1 CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) (S/S BY A-A-55617 AND A-A-55619)
FF-C-82B(2) NOT 1 CASTER, SWIVEL CHAIR (S/S BY A-A-1011)
FF-C-88C(1) NOT 1 CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY (S/S BY ASME-B56.11.1)
FF-C-91 CASTERS; WOOD-CHAIR (S/S BY FF-C-82)
FF-H-001687B LOCKS, OFFICE MACHINE (S/S BY A-A-1013)
FF-H-106/1 NOT 1 HARDWARE, BUILDERS, LOCKS AND DOOR TRIM, CYLINDER ENTRANCE DOOR LOCK TYPE 122 AND 122A (S/S BY BHMA-A156.2, A156.5 AND A156.16)
FF-H-106/2 HARDWARE, BUILDERS, LOCKS AND DOOR TRIM, CYLINDER ENTRANCE DOOR LOCK TYPE 123 AND 123B (S/S BY BHMA-A156.2, A156.5, A156.16)
FF-H-106/3 NOT 1 HARDWARE, BUILDERS, LOCKS AND DOOR TRIM. LETTER BOX PLATES (S/S BY BHMA-A156.2, A156.5 AND A156.16)
FF-H-106C NOT 1 HARDWARE, BUILDER'S; LOCKS AND DOOR TRIM; GENERAL SPECIFICATION FOR (S/S BY BHMA-A156.2, A156.5 AND A156.16)
FF-H-111C HARDWARE, BUILDERS, SHELF & MISC (S/S BY VARIOUS ANSI'S & CID'S)
FF-H-116E HINGES, HARDWARE, BUILDERS (S/S BY MULTIPLE ANSI S & CIDS)
FF-H-121D NOT 1 HARDWARE, BUILDER'S; DOOR CLOSERS (S/S BY A-A-1926)
FF-H-136(1) HARDWARE AND FITTINGS FOR LAVATORY-PARTITIONS AND INCLOSURES (USE FF-H-00111B OR FF-H-116C)
FF-H-1819 HARDWARE, BUILDERS'; AUXILIARY LOCKS (S/S BY A-A-1932)
FF-H-1820 HARDWARE, BUILDERS, EXIT DEVICES (S/S BY BHMA-A156.3)
FF-L-486 LOCK, CABINET
FF-P-001480(1) NOT 1 PADLOCK, KEY OPERATED (RESISTANT TO OPENING BY FORCE, PICK, & BYPASS TECHNIQUES) (S/S BY ASTM-F883)
FF-P-101F PADLOCKS (S/S BY A-A-1928, A-A-1930, A-A-1927, MIL-S-23769)
FF-S-325 NOT 4 SHIELD, EXPANSION; NAIL, EXPANSION; AND NAIL, DRIVE SCREW (DEVICES, ANCHORING, MASONRY) (S/S BY A-A-1922, A-A-1923, A-A-1924, A-A-1925, A-A-55614, A-A-55615)
FF-S-325(I3) NOT 4 SHIELD, EXPANSION; NAIL, EXPANSION; AND NAIL, DRIVE SCREW (DEVICES, ANCHORING, MASONRY) (S/S BY A-A-1922)
FF-S-760A(2) NOT 1 STRAP, RETAINING, (METAL FOR CONDUIT, PIPE, AND CABLE) (S/S BY NASM760)
FF-T-791B(1) NOT 1 TURNBUCKLE (S/S BY ASTM-F1145)
JAN-K-1051 KEEPER, SLIDE, PLASTIC, BALL TYPE
JJ-S-750A STRAP, WEBBING (S/S BY A-A-556)
MIL-A-18279C ANODE, CORROSION PREVENTIVE, IMPREGNATED GRAPHITE, RODS AND BARS
MIL-A-21412A NOT 2 ANODES, CORROSION PREVENTIVE, MAGNESIUM ALLOY, CAST OR EXTRUDED SHAPES WITH CAST-IN CORES (NO S/S DOCUMENT)
MIL-A-23871A(1) NOT 1 ANODES, CORROSION PREVENTIVE, LEAD ALLOY ROD SHAPED (NO S/S DOCUMENT)
MIL-A-24625 NOT 2 ANODES, CORROSION PREVENTIVE, PLATINUM PLATED NIOBIUM WIRE TYPE, CATHODIC PROTECTION
MIL-A-43671(1) NOT 1 ADAPTER, REVERSIBLE, QUICK FIT, 1-3/4 INCH (NO S/S DOCUMENT)
MIL-A-52818 NOT 1 ANCHOR, GUY: SHIELD, EXPANSION (NO S/S DOCUMENT)
MIL-A-81008 NOT 1 ADAPTER, MOUNTING MX-4773/ASQ-56A (NO S/S DOCUMENT)
MIL-B-11027 BUCKLES, CENTER BAR
MIL-B-1195A BUTTON, DOOR
MIL-B-12973 BUCKLES, 2-INCH, HINGED, DOUBLE BAR
MIL-B-17020A BUCKLE (ORTHOPEDIC)
MIL-B-1807 BRACE, CORNER, TOOL CHEST
MIL-B-1921 BUCKLE, 1-INCH, SAALBACH
MIL-B-1962C(1) NOT 1 BUCKLES, END, 1-INCH (NO S/S DOCUMENT)
MIL-B-2331D(1) NOT 1 BUCKLES, END BAR, WITH TONGUE (NO S/S DOCUMENT)
MIL-B-2505G NOT 1 BUCKLE, CENTER BAR WITH TONGUE
MIL-B-3493D(1) NOT 1 BUCKLES, END BAR WITH TONGUE (FOR LEATHER) (NO S/S DOCUMENT)
MIL-B-4792E NOT 1 BUMPER, RUBBER, DUPLEX ROUND
MIL-B-543G NOT 3 BUCKLES, TONGUELESS AND WEB STRAP
MIL-B-63954 NOT 1 BOLT ASSEMBLY, DOOR FOR WADS
MIL-B-70332/3 NOT 1 BRACKET, STOP (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
MIL-C-172C(I5) SUP 1D NOT 1 CASES; BASES, MOUNTING; AND MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT) (S/S BY MIL-F-85731)
MIL-C-1961 CLIP, MARKING TAG
MIL-C-21565B(1) CLAMP, LOOP, PLASTIC, WIRE SUPPORT (USE MIL-S-23190D)
MIL-C-24066/1A CLIP, CRYSTAL HOLDER (NO S/S DOCUMENT)
MIL-C-24066/2E NOT 2 CLIP, SOLID, SPRING TENSION (S/S BY NASM24066/2)
MIL-C-24066/3C NOT 2 CLIP, SINGLE SLOT, SPRING TENSION (S/S BY NASM24066/3)
MIL-C-24066/4D NOT 1 CLIP, DOUBLE SLOT, SPRING TENSION (S/S BY NASM24066/4)
MIL-C-24066/5A CLIP, HOLDER FOR NEON LAMP (NO S/S DOCUMENT)
MIL-C-24066C(1) NOT 2 CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR (S/S BY NAS1463)
MIL-C-45905 CLIP, DRAWCORD (USE MS 70110)
MIL-C-45918 NOT 1 CLEVISES AND CONNECTORS (ROD END)
MIL-C-4749 CASTERS, RIGID AND SWIVEL, PRECISION, HEAVY DUTY (S/S BY MIL-C-4751)
MIL-C-4751D(3) NOT 2 CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING (S/S BY NASM4751)
MIL-C-496D NOT 1 CLIP, END, STRAP
MIL-C-52078 CAP PLUG, CAP, AND PLUG, PROTECTIVE, PLASTIC, DUST AND MOISTURE SEAL (USE MIL-C-5501)
MIL-C-5501/1 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG FLARED TUBE END AND STRAIGHT THREADED BOSS) (S/S BY NAS833AND NAS836)
MIL-C-5501/10A NOT 2 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-MACHINE SCREW) (S/S BY NAS845)
MIL-C-5501/11 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (CAP MACHINE SCREW) (S/S BY NAS832)
MIL-C-5501/12 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-UNJ THREAD) (NO S/S DOCUMENT)
MIL-C-5501/13 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG UNJ THREAD) (NO S/S DOCUMENT)
MIL-C-5501/14 NOT 2 CAPS, PROTECTIVE, DUST AND MOISTURE SEAL FOR RESISTOFLEX DYNATUBE FITTINGS (S/S BY NAS841)
MIL-C-5501/15 NOT 2 PLUG, PROTECTIVE, DUST AND MOISTURE SEAL FOR RESISTOFLEX DYNATUBE FITTINGS (NO S/S DOCUMENT)
MIL-C-5501/16 NOT 2 CAPS, PROTECTIVE, DUST AND MOISTURE SEAL FOR AV-8 AIRCRAFT FITTINGS WITH BRITISH SIZE PIPE THREADS (NO S/S DOCUMENT)
MIL-C-5501/17 NOT 2 PLUG, PROTECTIVE, DUST AND MOISTURE SEAL FOR AV-8 AIRCRAFT FITTINGS WITH BRITISH SIZE PIPE THREADS (NO S/S DOCUMENT)
MIL-C-5501/18 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-FLARED TUBE END AND STRAIGHT THREADED BOSS), METRIC (NO S/S DOCUMENT)
MIL-C-5501/19 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-FLARELESS TUBE END), METRIC (NO S/S DOCUMENT)
MIL-C-5501/2 NOT 2 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-FLARELESS TUBE END) (S/S BY NAS838 AND NAS842)
MIL-C-5501/20 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-FLARED AND FLARELESS FITTING), METRIC (NO S/S DOCUMENT)
MIL-C-5501/21 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-BEADED HOSE CONNECTION), METRIC (NO S/S DOCUMENT)
MIL-C-5501/22 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-PIPE THREAD), METRIC (NO S/S DOCUMENT)
MIL-C-5501/23 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-PIPE THREAD), METRIC (NO S/S DOCUMENT)
MIL-C-5501/24 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-PLUG, GENERAL PURPOSE), METRIC (NO S/S DOCUMENT)
MIL-C-5501/25 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-TUBING), METRIC (NO S/S DOCUMENT)
MIL-C-5501/26 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-TUBING), METRIC (NO S/S DOCUMENT)
MIL-C-5501/27 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-MACHINE SCREW), METRIC (NO S/S DOCUMENT)
MIL-C-5501/28 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP MACHINE SCREW), METRIC (NO S/S DOCUMENT)
MIL-C-5501/29 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-MJ THREAD), METRIC (NO S/S DOCUMENT)
MIL-C-5501/3 NOT 2 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (CAP FLARED AND FLARELESS FITTING) (S/S BY NAS835)
MIL-C-5501/30 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG-MJ THREAD), METRIC (NO S/S DOCUMENT)
MIL-C-5501/4 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-BEADED HOSE CONNECTION) (S/S BY NAS839)
MIL-C-5501/5 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG PIPE THREAD) (S/S BY NAS840)
MIL-C-5501/6A NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL (CAP-PIPE THREAD) (S/S BY NAS846)
MIL-C-5501/7 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (CAP PLUG, GENERAL PURPOSE) (S/S BY NAS834)
MIL-C-5501/8 NOT 1 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL (PLUG TUBING) (S/S BY NAS843)
MIL-C-5501/9 NOT 1 CAP AND PLUG, PROTECTIVE DUST AND MOISTURE SEAL (CAP TUBING) (S/S BY NAS844)
MIL-C-5501G SUP 1 NOT 1 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL, GENERAL SPECIFICATION FOR (S/S BY NAS847)
MIL-C-6818D NOT 1 CLAMP, INSTRUMENT MOUNTING, AIRCRAFT (S/S BY NASM6818)
MIL-C-7474E NOT 2 CASTER, INDUSTRIAL (NO S/S DOCUMENT)
MIL-C-85449(2) NOT 1 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHION, GENERAL SPECIFICATION FOR (S/S BY NASM85449)
MIL-C-85449/1B NOT 1 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 DEG. F, FUEL RESISTANT, GENERAL PURPOSE (S/S BY NASM85449/1)
MIL-C-85449/2B NOT 1 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, EPR RUBBER, 321 CRES, 275 DEG. F, GENERAL PURPOSE (S/S BY NASM85449/2)
MIL-C-85449/3B NOT 1 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, SILICONE FABRIC, REINFORCED 321 CRES, 500 DEG. F, GENERAL PURPOSE (S/S BY NASM85449/3)
MIL-C-85449/4A NOT 1 CLAMP ASSEMBLY, SADDLE-TYPE CUSHIONED, PTFE, 321 CRES, -320 DEG. F TO 450 DEG. F, GENERAL PURPOSE (S/S BY NASM85449/4)
MIL-C-8603B(1) NOT 1 CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT
MIL-C-87972A NOT 1 CASTERS,RIGID AND SWIVEL,GENERAL SPECIFICATION FOR
MIL-C-8956A(1) CLAMPS, LOOP, TUBE SUPPORT (FOR FUTURE REQ. USE MIL-C-8603 & MIL-C-85052
MIL-D-1552 DEES, CHEEK
MIL-D-43599 CASTER, FOR INSTITUTIONAL DUTY
MIL-DTL-27536/1 NOT 1 COUPLING, CLAMP, GROOVED, V-BAND, 1.750 TO 14.250 FLANGE OD (-65 DEG. TO +800 DEG. F) (S/S BY SAE-AS5355/1)
MIL-DTL-27536/2 NOT 1 COUPLING, CLAMP, GROOVED, V-BAND, 1.750 TO 6.250 FLANGE OD (-450 DEG. F TO +250 DEG. F) (S/S BY SAE-AS5355/2)
MIL-DTL-27536/3 NOT 1 COUPLING, CLAMP, GROOVED, V-BAND, 1.750 TO 14.250 FLANGE OD (-320 DEG. TO +1200 DEG. F) (S/S BY SAE-AS5355/3)
MIL-DTL-27536C NOT 1 COUPLING, CLAMP, GROOVED, V-BAND (S/S BY SAE-AS5355)
MIL-DTL-29181C(1) NOT 2 HASP, HIGH SECURITY, SHROUDED, FOR HIGH AND MEDIUM SECURITY PADLOCK
MIL-DTL-43607H NOT 1 PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE
MIL-F-11698D NOT 1 FASTENER, QUICK RELEASE, ALUMINUM (NO S/S DOCUMENT)
MIL-F-1920 SNAP, LOCK
MIL-F-81334B NOT 1 FOAM, PLASTIC, FLEXIBLE, OPEN CELL, POLYESTER TYPE POLYURETHANE
MIL-F-81334B(I1) NOT 1 FOAM, PLASTIC, FLEXIBLE, OPEN CELL POLYESTER TYPE, POLYURETHANE
MIL-H-10044B NOT 1 HINGE, CHEST, OFFSET (NO S/S DOCUMENT)
MIL-H-10050B(1) HARDWARE, AIRBORNE, EQUIPAGE (USE MIL-H-7195)
MIL-H-1209B HOOK, SCREW
MIL-H-1214 HOOKS, DOOR
MIL-H-1237C(2) HINGES, BUTT (FOR SHIPBOARD USE) (S/S BY A-A-50432)
MIL-H-1806 HANDLE, TOOL CHEST
MIL-H-19985A HARDWARE KIT, FIRE DOOR, AUTOMATIC CLOSING
MIL-H-20622 HANDLE, CHEST (SURFACE)
MIL-H-20665 HARDWARE, TRUNK AND CHEST
MIL-H-2812 HASPS, HINGED, AND STAPLES
MIL-H-29181/1 NOT 1 HASP, HIGH SECURITY, SHROUDED MK 2 MOD 9 USING HIGH AND MEDIUM SECURITY PADLOCK STYLE 1 (S/S BY MIL-H-29181)
MIL-H-29181/2 NOT 1 HASP, HIGH SECURITY, SHROUDED MK 2 MOD 9 USING HIGH SECURITY PADLOCK STYLE 2 (S/S BY MIL-H-29181)
MIL-H-3780C NOT 1 HANGER & TRACK SETS, HORIZONTAL SLIDING DOOR-(FUTURE PROCUREMENT - REFER TO BHMA A156.14)
MIL-H-43905/1A NOT 1 HASP, HIGH SECURITY PADLOCKS STYLE 1 (S/S BY MIL-H-43905)
MIL-H-43905/2A NOT 1 HASP, HIGH SECURITY PADLOCKS STYLE 2 (S/S BY MIL-H-43905)
MIL-H-43905/3A NOT 1 HASP, HIGH SECURITY PADLOCKS STYLE 3 (S/S BY MIL-H-43905)
MIL-H-43905/4A NOT 1 HASP, HIGH SECURITY PADLOCKS STYLE 4 (S/S BY MIL-H-43905)
MIL-H-43905/5A NOT 1 HASP, HIGH SECURITY PADLOCKS, STYLE 5 (S/S BY MIL-H-43905)
MIL-H-43905/6A NOT 1 HASP, HIGH SECURITY PADLOCKS- STYLE 6 (S/S BY MIL-H-43905)
MIL-H-43905/7 NOT 1 HASP, HIGH SECURITY PADLOCKS - STYLE 7 (S/S BY MIL-H-43905)
MIL-H-43905/8 NOT 1 HASP, HIGH SECURITY PADLOCKS - STYLE 8 (S/S BY MIL-H-43905)
MIL-H-43905/9 NOT 1 HASP, HIGH SECURITY PADLOCKS - STYLE 9 (S/S BY MIL-H-43905)
MIL-H-43905C NOT 2 HASPS, HIGH SECURITY PADLOCKS (S/S BY MIL-DTL-29181)
MIL-H-639D NOT 1 HOOK (FOR BELTS, STRAPS, AND EQUIPAGE ITEMS)
MIL-H-929B HOOK, COAT AND HAT (USE FF-H-111)
MIL-H-9850C SUP 1 NOT 1 HINGE, BUTT, CONTINOUS, PIANO
MIL-H-9859A NOT 1 HANDWHEEL, ORDNANCE
MIL-H-9890E NOT 1 HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS
MIL-H-9896C NOT 1 HARDWARE, UNIVERSAL LOAD CARRYING SLING (NO S/S DOCUMENT)
MIL-I-5432C(1) NOT 4 INSULATOR, VIBRATION (NO S/S DOCUMENT)
MIL-L-11075G NOT 1 LOOPS, STRAP FASTENER
MIL-L-1360A LATCH SET, RIM
MIL-L-15596G(1) NOT 1 LOCKS, COMBINATION FOR GENERAL SERVICES ADMINISTRATION APPROVED SECURITY CONTAINERS, VAULT DOORS, AND SAFE LOCKERS (S/S BY FF-L-2740 AND UL768)
MIL-L-16217A(1) LATCH SET, RIM (METAL DOOR)
MIL-L-17832 LOCK SET, RIM, UPRIGHT
MIL-L-2045B(1) NOT 1 LOOP, STRAP FASTENER.(FOR NONEQUIPAGE ITEMS)
MIL-L-2898/1 NOT 1 LOCK, FLUSH, TYPE A, DEAD BOLT (NO S/S DOCUMENT)
MIL-L-2898/2 NOT 1 LOCK, FLUSH, TYPE B, DEAD BOLT (NO S/S DOCUMENT)
MIL-L-2898D(1) NOT 1 LOCKS, FLUSH, METAL AND WOOD DOOR AND DRAWER, NAVAL SHIPBOARD (NO S/S DOCUMENT)
MIL-L-29151(1) NOT 1 LOCK AND LOCK SETS, EXTERIOR, ORDNANCE, HIGH SECURITY (NO S/S DOCUMENT)
MIL-L-2950 LOCKS, SASH AND BLIND
MIL-L-3851E NOT 1 LOOPS, SLIDE (FOR EQUIPAGE)
MIL-M-12863 NOT 1 MOUNT, VIBRATION (VIBRATION MOUNTS MT-1177/U, MT-1178/U, MT-1179/U) (NO S/S DOCUMENT)
MIL-M-22322A(1) NOT 1 MOUNT, RESILIENT, SHEAR (FOR USE IN SHIPPING CONTAINER) (NO S/S DOCUMENT)
MIL-M-22673(2) NOT 1 MOUNTING-PLENUM MT-2243(*)/ASQ-56 AND MT-3946(*)/ASQ-56B
MIL-M-22674A NOT 1 MOUNTING-PLENUMS MT-2244(*)/ASQ AND MT-3659(*)/ASQ (NO S/S DOCUMENT)
MIL-M-25431 SUP 1 MOUNT, RESILIENT
MIL-M-45907A(1) NOT 1 MOUNT, SHIPPING CONTAINER, RESILIENT: SHOCK AND VIBRATION DAMPING (S/S BY A-A-52486)
MIL-M-81288(1) NOT 2 MOUNTING BASES, FLEXIBLE PLASTIC FOAM
MIL-P-15877D NOT 1 PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE)
MIL-P-17257C PADLOCK, COMBINATION, SECURITY (MANIPULATION RESISTANT) (USE FF-P-110)
MIL-P-17802E PADLOCKS AND PADLOCK SETS, LOW SECURITY, KEY OPERATED, REGULAR (OPEN) SHACKLE (S/S BY A-A-1927)
MIL-P-19415C PLUGS, ZINC ANODE RETAINING, HEAT EXCHANGER CATHODIC PROTECTION (USE MIL-A-19521A)
MIL-P-20691C NOT 1 PLUG, EXPANSION (S/S BY A-A-52420)
MIL-P-21769A PLUGS, FUSIBLE, REFRIGERANT-12 (NO S/S DOCUMENT)
MIL-P-24498 NOT 1 PADLOCKS, MEDIUM AND HIGH SECURITY, KEY OPERATED, OPEN AND SHROUDED SHACKLE, AND HASPS (SEE NOTICE 1 FOR REPLACEMENT INFORMATION)
MIL-P-43951A(2) NOT 1 PADLOCK, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE (S/S BY FF-P-2827)
MIL-P-584B(2) NOT 1 POKER (NO S/S DOCUMENT)
MIL-PRF-5501/31A(1) NOT 1 CAP, CIRCULAR, ESD, PROTECTIVE, ELECTRICAL CONNECTOR (S/S BY NASM5501/31)
MIL-PRF-5501/32A(1) NOT 1 CAP, "D" TYPE, ESD PROTECTIVE, ELECTRICAL CONNECTOR (S/S BY NASM5501/32)
MIL-Q-2288A QUICK RELEASE, FOR ONE INCH WEBBING (S/S BY MIL-S-10055)
MIL-R-1676 RINGS, FOR BUCKETS AND WATER BAG FUNNEL
MIL-R-45906D(1) NOT 1 RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK (NO S/S DOCUMENT)
MIL-S-11699C NOT 1 SNAPHOOK, 1-1/8 FIXED LOOP EYE, WITH SPRING CLOSURE (S/S BY MIL-S-43770)
MIL-S-12100 NOT 1 SHOCK MOUNT M-447, M-448, M-449 AND BRACKET FT-512 (NO S/S DOCUMENT)
MIL-S-13334 SPRINGS, HELICAL, COMPRESSION, FOR HGHLY STRESSED ARTILLERY SERVICE. ()SUPERSEDED BY MIL-S-13572().
MIL-S-1917 SNAP, 1 IN. EYE (HEAVY)
MIL-S-1918 SNAP, HUBBARD, 11/4 IN.
MIL-S-1919 SNAP, 11/2 IN., SWIVEL EYE (HEAVY)
MIL-S-1922 SNAP, BOLT, OPEN EYE
MIL-S-1959 SNAPS, 3/4 IN., WITH SWIVEL
MIL-S-1967 SNAPS, 3/8 INCH
MIL-S-2032C NOT 1 SNAPHOOK, 1 1/4-INCH, BOLT TYPE, SWIVEL, ROUND EYE (NO S/S DOCUMENT)
MIL-S-2147 SNAP, GERMAN AND HARNESS
MIL-S-2210 SNAP, HARNESS, SWIVEL EYE
MIL-S-23190/1A NOT 1 STRAP, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT (S/S BY SAE-AS23190/1)
MIL-S-23769C NOT 1 SEALS, SECURITY (S/S BY FF-S-2738)
MIL-S-2476 STONE, SHARPENING, MULTIPLE, WITH OIL RESERVOIR (ARMY) (SUPERSEDES JQD 682)
MIL-S-2578D NOT 1 SNAPHOOK, FIXED LOOP, 3/8, 1/2, 5/8, 3/4, 1 AND 1-1/2 INCH (S/S BY MIL-S-43770)
MIL-S-3960A STRAP, RETAINING (USE FF-S-760)
MIL-S-43353A NOT 1 SNAP HOOK, TRIGGER TYPE, FIXED LOOP EYE, 3/4 INCH (NO S/S DOCUMENT)
MIL-S-43384A NOT 1 SNAPHOOK, 1 INCH, FIXED LOOP, RIVETED SPRING CLOSURE (S/S BY MIL-S-43770)
MIL-S-43403A NOT 1 SNAPHOOK, 3/4 INCH SWIVEL EYE, WITH PIVOT CLOSURE (S/S BY MIL-S-43770)
MIL-S-43770(3) SUP 1 NOT 1 SNAP HOOKS GENERAL SPECIFICATION FOR (S/S BY NASM43770)
MIL-S-43770/10 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH (S/S BY NASM43770/10)
MIL-S-43770/11 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, LIGHT DUTY (S/S BY NASM43770/11)
MIL-S-43770/12A NOT 3 SNAP HOOK, CAST BODY, FIXED ROUND EYE W/O ROLLER, FLAT SPRING CLOSURE (S/S BY NASM43770/12)
MIL-S-43770/13 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE W/O ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH (S/S BY NASM43770/13)
MIL-S-43770/14 NOT 3 SNAP HOOK, CAST BODY, OPEN EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/14)
MIL-S-43770/1A NOT 3 SNAP HOOK, WIRE BODY, FIXED LOOP EYE, FLAT SPRING CLOSURE, WITH RETAINER (S/S BY NASM43770/1)
MIL-S-43770/2A NOT 2 SNAP HOOK, WIRE BODY, FIXED LOOP EYE, SIDE RETAINING CLOSURE (S/S BY NASM43770/2)
MIL-S-43770/3 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH (S/S BY NASM43770/3)
MIL-S-43770/4 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, WIDE MOUTH (S/S BY NASM43770/4)
MIL-S-43770/5 NOT 3 SNAP HOOK, CAST BODY, FIXED EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/5)
MIL-S-43770/6 NOT 3 SNAP HOOK, CAST BODY, SWIVEL EYE, SLIDING BOLT CLOSURE (S/S BY NASM43770/6)
MIL-S-43770/7 NOT 3 SNAP HOOK, CAST BODY, LOOP EYE SWIVEL (S/S BY NASM43770/7)
MIL-S-43770/8 NOT 3 SNAP HOOK, CAST BODY, ROUND EYE SWIVEL (S/S BY NASM43770/8)
MIL-S-43770/9 NOT 3 SNAP HOOK, CAST BODY, FIXED LOOP EYE, TRIGGER CLOSURE (S/S BY NASM43770/9)
MIL-STD-1758 NOT 1 INSERT, SCREW THREAD, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
MIL-T-22745(1) NOT 1 TURNBUCKLE, FORGED STEEL, GALVANIZED, WELDLESS (S/S BY FF-T-791)
MIL-T-5684B NOT 1 TIE ROD, ROUND & SQUARE, AIRCRAFT
MIL-T-5685C NOT 1 TURBUCKLE, AIRCRAFT (NO S/S DOCUMENT)
MIL-T-63960 NOT 1 TIEDOWN, WEB, SPECIAL PURPOSE
MIL-T-81364(1) NOT 1 T-BOLT, 180,000 PSI, TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS (NO S/S DOCUMENT)
MS122900THRUMS122939B NOT 2 CLAMP LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE (S/S BY SAE-AS122900THRUAS122939)
MS14108F NOT 1 FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (S/S BY MIL-F-85731/1)
MS14109A NOT 2 FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
MS14198A NOT 1 LOCK, ROD END, EXTRA STRENGTH, HIGH PROFILE LUG (S/S BY NASM14198)
MS14227 NOT 1 LOCK, ROD END, IMPROVED STRENGTH, NAS LUG (S/S BY SAE-AS14227)
MS14271C NOT 1 HANDLE, COUPLING, PNEUMATIC STARTER
MS15018B HANDLE, RECESS, BRASS (FOR METAL FURNITURE)
MS15019A CATCH, PUSH BUTTON (FOR METAL FURNITURE)
MS15020B HANDLE, T, 2-1/2-INCH, AND NUT (FOR METAL FURNITURE)
MS15021C HANDLE, T, 2-INCH, AND NUT (FOR METAL FURNITURE)
MS15022B CATCH, FRICTION (FOR METAL FURNITURE)
MS15027A LOCK, INSTALLATION OF (FOR METAL FURNITURE DRAWERS)

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点