畅销书下载

DOD美国国防部文件（含MIL美国军用标准）及相关标准文献中英文对照目录183页.......(定题浏览)

这个合集包括已经被美国国防部采用，代替相同内容的书面文件或取代先前军事技术规范的行业标准。这些标准来自二十多个组织，其中包括 ACI（美国混凝土协会）、AGMA（美国齿轮制造商协会）、AIA/NAS（美国航天工业协会——国家航天标准）、ANSI（美国国家标准协会）、API（美国石油学会）、ARI（美国空调与制冷协会）、ASME（美国机械工程师协会）、AWWA（美国给水工程协会）、CGA（压缩气体协会）、EIA（电子工业协会）、IEEE（电气电子工程师协会）、IPC（电子电路互联和封装协会）、MSS（美国阀门装置制造标准化协会）、NEMA（美国国家电器制造商协会）、NFPA（美国消防协会）、SAE（美国机动工程师协会）、UL（美国保险商实验室）。

M〉〉〉〉〉〉点击索取〈〈〈〈〈〈

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

MS15029A BUMPER (FOR METAL FURNITURE) (FOR SHIPBOARD USE)
MS15030A HASP AND KEEPER (FOR METAL FURNITURE)
MS15090A LEVER HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15091A KEEPER, HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15092 LATCH, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15093 STRAP, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15094 CAM STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15095 ESCUTCHEON, LOCK SET PART (FOR CLOTHES AND CLEANING GEAR LOCKERS)
MS15096 T HANDLE WITH HEXAGON NUT, STEEL (FOR METAL SAFE LOCKER, TYPE NOS. 1, 3, 4, AND 6)
MS15097 KNOB, NICKEL-PLATED BRASS (FOR DRAWER LATCH FOR METAL FURNITURE)
MS16227A CHANNEL, DRAWER AND CASE FOR METAL FURNITURE
MS16652 DRAWER PULL-LATCH, METAL FURNITURE
MS16993B NOT 1 PLUG, FUSIBLE, REFRIGERANT-12
MS17820 NOT 2 INSERT, HELICAL COIL INSTALLATION THREAD; DESIGN STANDARD FOR
MS18012A NOT 1 HANDLE, METAL, SPRING BAIL TYPE
MS18015B NOT 1 CATCH, CLAMPING AND STRIKE (CONCEALED SPRING TYPE)
MS18018 SEAL, LEAD (S/S BY MS 51938)
MS18034E STRAP, CABLE, ADJUSTABLE, PLASTIC, TYPE I, CLASS 2 (USE MS 3367)
MS18035D STRAP, CABLE, IDENTIFICATION ADJUSTABLE, PLASTIC, TYPE 2, CLASS2 (USE MS 3368)
MS18072C RING, HANDLING, AIR START COUPLING (S/S BY MS-14271)
MS20000A TURNBUCKLE ASSEMBLY - PIN EYE, LEFT AND RIGHT HAND
MS21103A NOT 1 CLAMP, PLAIN, SUPPORT, LOOP, AIRCRAFT, TYPE 1 CLASS A & B (USE AN 742)
MS21104D CLAMP, LOOP, CUSHIONED, WEDGE, FUEL, WEATHER RESISTANT, 212 DEG. F. TYPE II, CLASS A AND B (S/S BY MS21919)
MS21105B CLAMP, LOOP, CUSHIONED, WEDGE, FLUID RESISTANT, 500 DEG. F, CRES, TYPP III, CLASS B (S/S BY MS21105)
MS21106A NOT 1 CLAMP, LOOP, CUSHIONED, 1200 DEG. F., CRES TYPE IV, CLASS B
MS21122D CLAMP, LOOP, CUSHIONED, WEDGE, POLYTETRAFLUOROETHYLENE
MS21310A NOT 1 BOLT, HOOK, SUPPORT DRIVE FETTER THREAD (POLE LINE) (NO S/S DOCUMENT)
MS21312A NOT 1 HANDWHEEL-REVOLVING HANDLE, WITH KEYWAY
MS21313G NOT 3 PADLOCK SETS - INDIVIDUALLY KEYED AND KEYED ALIKE (S/S BY A-A-59486)
MS21314B NOT 1 STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUIT, AND CABLE (S/S BY NASM21314)
MS21315A NOT 1 STRAP, RETAINING, TWO HOLE, FOR TUBING (S/S BY NASM21315)
MS21322D NOT 1 CLAMP, LOOP-ALUMINUM, PLAIN AND CUSHIONED (S/S BY NASM21322)
MS21333F NOT 1 CLAMP, LOOP-STEEL-PLAIN AND CUSHIONED (S/S BY NASM21333)
MS21334B NOT 1 CLAMP, LOOP-DOUBLE, CABLE OR TUBE, STEEL, PLAIN AND CUSHIONED (S/S BY NASM21334)
MS21919E(1) NOT 4 CLAMP, LOOP TYPE, CUSHIONED, SUPPORT
MS24373A NOT 1 CASTER, RIGID AND SWIVEL, PRECISION PNEUMATIC TIRED (S/S BY NASM24373)
MS24374B NOT 1 CASTER, RIGID AND SWIVEL, PRECISION, SPRING MOUNTED (S/S BY NASM24374)
MS24380D NOT 1 CASTER, INDUSTRIAL (S/S BY A-A-55617, A-A-55618, A-A-55619)
MS24535A NOT 2 FASTENER-CONTAINER CLOSURE
MS24563F NOT 1 COUPLING FLANGES, V-BAND, PROFILE DIMENSIONS FOR (S/S BY SAE-AS24563)
MS25281K NOT 2 CLAMP, LOOP, PLASTIC, WIRE SUPPORT (S/S BY SAE-AS25281)
MS26509A MOUNT, RESILIENT, CUP TYPE, SPECIFIC LOAD, CLASS 1
MS26510A MOUNT, RESILIENT, CUP TYPE, SPECIFIC LOAD, CLASS 2
MS26511 MOUNT, RESILIENT, CUP TYPE, TWO TO ONE LOAD RANGE, CLASS 1
MS26512 MOUNT, RESILIENT, CUP TYPE, TWO TO ONE LOAD RANGE, CLASS 2
MS26513A MOUNT, RESILIENT, PLATE TYPE
MS27114C NOT 3 COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD, (MINUS 65 DEG. TO PLUS 800 DEG. F) (S/S BY MIL-DTL-27536/1)
MS27115C NOT 3 COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 6.250 FLANGE OD (MINUS 450 DEG. TO PLUS 200 DEG. F) (S/S BY MIL-DTL-27536/2)
MS27116C NOT 3 COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD (MINUS 320 DEG. TO PLUS 1500 DEG. F) (S/S BY MIL-DTL-27536/3)
MS27117D COUPLING, CLAMP, GROOVED, V BAND, 14.250 TO 24.250 FLANGE OD, (MINUS 320 DEG. TO PLUS 1500 DEG. F) (NO S/S DOCUMENT)
MS27118B NOT 1 COUPLING, CLAMP, GROOVED, V BAND, 24.250 TO 40.250 FLANGE OD (MINUS 320 DEG. TO PLUS 1500 DEG. F) (NO S/S DOCUMENT)
MS27120A NOT 1 CLEVIS, ROD ENG&TURNBUCKLE (GENERAL PURPOSE) (S/S BY NASM27120)
MS27149B NOT 1 CASTER, RIGID AND SWIVEL, PRECISION, HEAVY DUTY
MS27281A CASTER, RIGID AND SWIVEL, PRECISION, SPRING MOUNTED, PNEUMATIC TIRED (NO S/S DOCUMENT)
MS27405A NOT 2 CLAMP-TUBE
MS27417(1) NOT 2 CAP-PROPELLER SHAFT THREAD, SHIPPING
MS27601C NOT 1 FASTENER, SELF LOCKING, CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP) (S/S BY MS14109)
MS27954B NOT 1 TURNBUCKLE, BODY (GENERAL PURPOSE) (S/S BY NASM27954)
MS27956B NOT 1 HINGE, BUTT, NARROW AND BROAD, TEMPLATE, STEEL
MS27957 HINGE, BUTT-NARROW AND BROAD, TEMPLATE, HARDWARE, BUILDER S, COMMERCIAL, ALUMINUM SE MIL-H-1237(
MS27958B NOT 1 HINGE, BUTT, NARROW AND BROAD, TEMPLATE, BRASS
MS27959 HINGE, BUTT-NARROW AND BROAD, WITHOUT HOLES HARDWARE, BUILDER S, COMMERCIAL, ALUMINUM (USE MIL-H-1237)
MS27960B NOT 1 HINGE, BUTT, NARROW LIGHT, NON-TEMPLATE
MS27961B NOT 1 HINGE, BUTT, BROAD, NON-TEMPLATE (S/S BY BHMA-A156.1)
MS27962C NOT 1 HINGE, BUTT, SPRING, SCREEN DOOR, ADJUSTABLE (S/S BY BHMA-A156.17)
MS27963B NOT 1 HINGE, BUTT, SPRING SINGLE ACTING, AND DOUBLE ACTING, ADJUSTABLE (S/S BY BHMA-A156.17)
MS27964B NOT 1 HINGE, STRAP, CABINET
MS27965A NOT 1 HASP, HINGED, SAFETY, WITH SWIVEL STAPLE, STEEL (S/S BY BHMA-A156.20)
MS27966B NOT 1 HINGE, BUTT-NARROW, NON-TEMPLATE (S/S BY A-A-55586)
MS27967 HASP, HINGED&SAFETY, WITH FIXED STAPLE, HARDWARE, BUILDER,S, MISCELLANEOUS, STEEL
MS27968B NOT 1 HINGE, BUTT, BROAD, NON-TEMPLATE (S/S BY A-A-55587)
MS27969A NOT 1 HASP, HINGED, OPEN WITH FIXED STAPLE, STEEL (S/S BY BHMA-A156.20)
MS27970B NOT 1 HINGE, TEE (S/S BY BHMA-A156.20)
MS27971A NOT 1 HASP, HINGED, DOUBLE SAFETY, WITH FIXED STAPLE, STEEL (S/S BY BHMA-A156.20)
MS27972B NOT 1 HINGE-STRAP (S/S BY BHMA-A156.20)
MS27973B NOT 1 HINGE, STRAP (OFFSET) (S/S BY A-A-55588)
MS27974A TURNBUCKLE, GENERAL PURPOSE (NO S/S DOCUMENT)
MS27975D NOT 1 CLEVIS, ROD END-ADJUSTING, WIDE AND NARROW FORKS (S/S BY NASM27975)
MS27976E NOT 2 CLEVIS, ROD END-PLAIN, WIDE AND NARROW FORKS (S/S BY NASM27976)
MS27990B NOT 1 PIN, STRAIGHT, HINGE, PIANO (S/S BY A-A-55589, A-A-55590, A-A-55592, A-A-55594, AND A-A-55596)
MS28042F NOT 2 CLAMP, INSTRUMENT MOUNTING, AIRCRAFT (S/S BY NASM28042)
MS33591B NOT 2 TURNBUCKLE, LOCK WIRING OF
MS33633B INSERTS, SCREW THREADED, DESIGN AND USAGE LIMITATION FOR (SEE MIL-STD 1515
MS33646 INSERT, SCREW THREADS, HELICAL COIL, ASSEMBLY AND HOLE, DIMENSIONS FOR (USE MS33537)
MS3395A MOUNT, ADAPTER MT-3730/ASQ(NO S/S DOCUMENT)
MS35140D NOT 1 STRAP, RETAINING, ONE HOLE, FOR PIPE, RIGID CONDUIT AND CABLE (S/S BY NASM35140)
MS35143 SPRING, HELICAL
MS35146 TOGGLE, HAND LEVER, GREASE GUN (15 AND 21-OZ)
MS35254B NOT 1 BRACE, CORNER, BOX 3 QUARTER-ROUND FLANGES, 3-MOUNTING HOLES
MS35255A NOT 1 BRACK, CORNER, BOX, LARGE, 1 QUARTER-ROUND AND 2 CUT FLANGES, 3 MOUNTING HOLES (NO S/S DOCUMENT)
MS35256A NOT 1 BRACE, CORNER, BOX, SMALL, 1 QUARTER ROUND AND 2 CUT FLANGES, 3 MOUNTING HOLES (NO S/S DOCUMENT)
MS35257B NOT 1 BRACE, CORNER, BOX, LARGE, 2 QUARTER-ELLIPSE FLANGES, 2 MOUNTING HOLES
MS35258A NOT 1 BRACE, CORNER, BOX, SMALL, 2 QUARTER-ELLIPSE FLANGES, 2 MOUNTING HOLES (NO S/S DOCUMENT)
MS35259A NOT 1 BRACE, CORNER, BOX, 3 QUARTER-ROUND FLANGES, 6 MOUNTING HOLES (NO S/S DOCUMENT)
MS35260A NOT 1 BRACE, CORNER, BOX, 1 QUARTER-ROUND AND 2 CUT FLANGES, 4 MOUNTING HOLES (NO S/S DOCUMENT)
MS35261A NOT 1 BRACE, CORNER, BOX, 2 QUARTER-ELLIPSE FLANGES, 4 MOUNTING HOLES (NO S/S DOCUMENT)
MS35647E NOT 3 PADLOCKS, KEY OPERATED (S/S BY A-A-59487)
MS35648A NOT 2 PLUG, EXPANSION: PLAIN (S/S BY A-A-52420)
MS35791B NOT 1 HANDLE, BAIL, CHEST, SURFACE MOUNTING, COUNTERSUNK HOLES (S/S BY NASM 35791)
MS35792B NOT 1 HANDLE, BAIL, CHEST, RECESSED (S/S BY NASM35792)
MS35793B NOT 1 HANDLE, BAIL, CHEST, SURFACE MOUNTING, PLAIN HOLES (S/S BY NASM35793)
MS35812E NOT 1 CLEVIS, ROD END-ADJUSTABLE AND PLAIN, STEEL (S/S BY NASM35812)
MS35813D NOT 1 CONNECTOR, ROD END & STEEL
MS35821E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .032 THICKNESS, .063 PIN DIA (S/S BY A-A-55589)
MS35822E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .040 THICKNESS .091 PIN DIA (S/S BY A-A-55590)
MS35823E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .050 THICKNESS, .125 PIN DIA (S/S BY A-A-55591)
MS35824D(1) HINGE, CONTINUOUS (PIANO) .050 THICKNESS, .187 PIN DIA
MS35825E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .060 THICKNESS, .125 PIN DIA
MS35826E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .060 THICKNESS, .187 PIN DIA (S/S BY A-A-55593)
MS35827D(1) HINGE, CONTINUOUS (PIANO) .060 THICKNESS .250 PIN DIA
MS35828D(1) HINGE, CONTINUOUS, (PIANO) 0.60 THICKNESS .312 AND .375 PIN DIA
MS35829F NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .075 THICKNESS, .187 & .250 PIN DIA (S/S BY A-A-55594)
MS35830E NOT 1 HINGE, BUTT, CONTINUOUS (PIANO) .090 THICKNESS .250, & .375 PIN DIA (S/S BY A-A-55595)
MS35831E NOT 1 HINGE, BUTT, CONTINUOUS, (PIANO) .125 THICKNESS, .375 PIN DIA (S/S BY A-A-55596)
MS39014 CLAMP, LOOP
MS39056 BUSHING, SLEEVE, CABLE ADAPTER, FLANGED (S/S BY MS3420)
MS39085A(1) NOT 1 BRACKET, ANGLE, CABLE CLAMP SUPPORT
MS39087F(1) NOT 1 HANDLE, BOW (S/S BY NASM39087)
MS51550 NOT 1 BUCKLE, CLAMP STYLE, ONE PIECE WITH TONGUE (NO S/S DOCUMENT)
MS51561(1) NOT 1 TURNBUCKLE, ROUND BODY, EYE AND EYE (TYPE I, FORM 1, CLASS 4) (S/S BY ASTM-F1145)
MS51562(1) NOT 1 TURNBUCKLE, ROUND BODY, JAW AND JAW (TYPE I, FORM 1, CLASS 7) (S/S BY ASTM-F1145)
MS51563(1) NOT 1 TURNBUCKLE, ROUND BODY, JAW AND EYE (TYPE I, FORM 1, CLASS 8) (S/S BY ASTM-F1145)
MS51564(1) NOT 1 TURNBUCKLE, ROUND BODY, HOOK AND HOOK (TYPE I, FORM 1, CLASS 5) (S/S BY ASTM-F1145)
MS51565(1) NOT 1 TURNBUCKLE, ROUND BODY, HOOK AND EYE (TYPE I, FORM 1, CLASS 6) (S/S BY ASTM-F1145)
MS51566(1) NOT 1 TURNBUCKLE, SPREAD BODY, JAW AND JAW (TYPE I, FORM 2, CLASS 7) (S/S BY ASTM-F1145)
MS51567(1) NOT 1 TURNBUCKLE, SPREAD BODY, EYE AND EYE (TYPE I, FORM 2, CLASS 4) (S/S BY ASTM-F1145)
MS51568(1) NOT 1 TURNBUCKLE, SPREAD BODY, HOOK AND EYE (TYPE I, FORM 2, CLASS 6) (S/S BY ASTM-F1145)
MS51569(1) NOT 1 TURNBUCKLE, SPREAD BODY, JAW AND EYE (TYPE I, FORM 2, CLASS 8) (S/S BY ASTM-F1145)
MS51570(1) NOT 1 TURNBUCKLE, PIPE, BODY, EYE AND EYE (TYPE II, CLASS 4) (S/S BY ASTM-F1145)
MS51571(1) NOT 1 TURNBUCKLE, FLAT BODY, EYE AND EYE (TYPE I, FORM 3, CLASS 4) (S/S BY ASTM-F1145)
MS51572(1) NOT 1 TURNBUCKLE, FLAT BODY, JAW AND EYE (TYPE I, FORM 1, CLASS 8) (S/S BY ASTM-F1145)
MS51573(1) NOT 1 TURNBUCKLE, FLAT BODY, HOOK AND EYE (TYPE I, FORM 1, CLASS 6) (S/S BY ASTM-F1145)
MS51574(1) NOT 1 TURNBUCKLE, FLAT BODY, JAW AND JAW (TYPE I, FORM 2, CLASS 7) (S/S BY ASTM-F1145)
MS51828A SNAPHOOK, FIXED LOOP (USE MIL-S-43770)
MS51926B NOT 4 CLIP, END, STRAP TYPE I, CLASS 1 AND CLASS 2
MS51927A NOT 2 BUCKLE, TONGUELESS, I-BAR
MS51928B NOT 1 CLIP, SPRING TENSION
MS51929A NOT 1 BUCKLE, SPRING ACTION (S/S BY NASM51929)
MS51930A NOT 3 PAD EYE WELDING
MS51938C NOT 1 SEAL, METALLIC, LEAD AND WIRE (S/S BY FF-S-2738)
MS51939A NOT 4 LOOP, STRAP FASTENER (FOOTMAN'S LOOP) (S/S BY NASM51939)
MS51940C NOT 1 LOOP, SLIDE (FOR EQUIPAGE) (S/S BY A-A-55620)
MS51944A NOT 1 BUCKLE, TONGUELESS&2&BAR
MS51956A NOT 1 STRAP, RETAINING, ONE HOLE, FOR THIN WALL CONDUIT (EMT) (S/S BY NASM51956)
MS52150 NOT 2 CLAMP, LOOP, MUFFLER (S/S BY A-A-52406)
MS63043C NOT 2 ROD END, THREADED-LINKAGE, RIGID (S/S BY A-A-52493)
MS63044A NOT 2 STRAP, RETAINING, RECTANGULAR, CUSHIONED (S/S BY NAS-1711)
MS70099C NOT 1 SNAP HOOK, QUICK RELEASE (S/S BY PS70099)
MS70101C NOT 3 ADAPTER, REVERSIBLE, QUICK FIT, 500 LBS 1-3/4 INCH (S/S BY PS70101)
MS70109A NOT 4 CLIP, END, STRAP TYPE II, CLASS 1
MS70110B CLIP, SPRING TENSION, DRAWCORD (NO S/S DOCUMENT)
MS70111 SNAPHOOKS, SIDE RETAINING (USE MIL-S-43770)
MS87968 NOT 1 CASTERS, RIGID AND SWIVEL INDUSTRIAL DUTY
MS9012A RING-RETAINING EXTERNAL, BERYLLIUM COPPER
MS9013B RING-RETAINING, EXTERNAL, STEEL (ASG)
MS9014A RING RETAINING, INTERNAL, STEEL (ASG)
MS9017A BUSHING - SCREW, SLOTTED
MS9024C NOT 3 CLAMP, LOOP-CUSHIONED, JOGGLED, .204 HOLE (S/S BY NAS1715)
MS90297 NOT 2 BUCKLE, PARACHUTE CONTAINER
MS90376E NOT 1 CAP, DUST, PLASTIC, ELECTRIC CONNECTOR (S/S BY SAE-AS90376, NAS831, OR NAS837)
MS9071A NOT 1 BOSS, 18-1.50 MM SPARK PLUG THREAD HELICAL INSERT, STANDARD DIMENSIONS FOR. (ASG)
MS9101C BRACKET, ANGLE, 90 DEG. .190 BOLT
MS9102C BRACKET, ANGLE, 90 DEG. .190 X .250 BOLT
MS9103C NOT 1 BRACKET, ANGLE, 90 DEG. .190 X .312 BOLT (S/S BY MS9594)
MS91406B MOUNTS, VIBRATION, BEAM-TYPE, CLASSES A & B, COARSE THREAD (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT) (S/S BY MS91405 OR MS91527)
MS91427 RESISTORS, VARIABLE (WIREWOUND, POWER-TYPE) STYLE RP10, 25 WATTS (USE MIL-R-22/3)
MS91526A NOT 1 MOUNTS, VIBRATION, BEAM-TYPE, CLASSES A AND B (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT) (S/S BY MS91405 OR MS91527)
MS91527B NOT 3 MOUNT, VIBRATION, CUP-TYPE, CLASSES A-B (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT)
MS9165B BRACKET-90 DEG. ANGLE, AMS 6350, .190 BOLT
MS9166B BRACKET-90 DEG. ANGLE, AMS 6350, .190 X .250 BOLT
MS9167B BRACKET-90 DEG. ANGLE, AMS 6350, .190 X .312 BOLT
MS9168B BRACKET-90 DEG. ANGLE, AMS 6350, ,190 X .375 BOLT
MS9228C NOT 1 BRACKET, ANGLE, 90 DEG, 0.190 BOLT (S/S BY SAE-AS9228)
MS9229B BRACKET-90 DEG. ANGLE, AMS 5504, .190 X .250 BOLT
MS9230C NOT 1 BRACKET, ANGLE, 90 DEG. .190 X 312 BOLT (S/S BY SAE-AS9230)
MS9231C NOT 1 BRACKET, ANGLE, 90 DEG. .190 X 375 BOLT (S/S BY SAE-AS9231)
MS9349B NOT 1 CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, 0.204 HOLE (S/S BY SAE-AS9349)
MS9350B NOT 1 CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, .265 HOLE (S/S BY NAS1715)
MS9351B NOT 1 CLAMP, LOOP-CUSHIONED, JOGGLED, ALUMINUM, .204 HOLE (S/S BY NAS1715)
MS9352B NOT 1 CLAMP, LOOP-CUSHIONED, JOGGLED, ALUMINUM, .265 HOLE (S/S BY NAS1715)
MS9353A NOT 2 CLAMP, LOOP-ALUMINUM, .204 HOLE (S/S BY SAE-AS9353)
MS9354A NOT 2 CLAMP, LOOP-ALUMINUM, .265 HOLE (S/S BY SAE-AS9354)
MS9365A BRACKET-FLAT, CRES AMS 5510, .190 BOLT
MS9366A BRACKET-FLAT, CRES AMS 5510, .190 X .250 BOLT (USE MS9552)
MS9367A BRACKET-FLAT, CRES AMS 5510, .250 BOLT
MS9379 NOT 2 PLUG, EXPANSION - AMS 5510 (S/S BY SAE-AS9379)
MS9380A NOT 2 PLUG, EXPANSION-AMS 4003 (S/S BY SAE-AS9380)
MS9391B NOT 1 CLAMP, LOOP-MULTIPLE TUBE, DETACHABLE CUSHION, AMS 5510 (S/S BY SAE-AS9391)
MS9392 NOT 2 CUSHION, LOOP CLAMP - MULTIPLE, 3-TUBE, AMS 3303 (S/S BY SAE-AS9392)
MS9393 NOT 2 CUSHION, LOOP CLAMP - MULTIPLE, 2-TUBE, AMS 3303 (S/S BY SAE-AS9393)
MS9394A NOT 1 STRAP, RETAINING-MULTIPLE TUBE, DETACHABLE CUSHION, AMS 5510 (S/S BY SAE-AS9394)
MS9395A NOT 1 BACKPLATE, RETAINING STRAP AMS 5510 (S/S BY SAE-AS9395)
MS9551B NOT 1 BRACKET, FLAT, STEEL, AMS 6350, CAD. PLATE (S/S BY SAE-AS9551)
MS9552A NOT 1 PLATE, MENDING (S/S BY SAE-AS9552)
MS9592A NOT 1 BRACKET, ANGLE, 90 DEG., CRES, .190 BOLT (S/S BY SAE-AS9592)
MS9593B NOT 1 BRACKET, ANGLE, 90 DEG. CRES AMS 5510, .190 X .250 BOLT (S/S BY SAE-AS9593)
MS9594A NOT 1 BRACKET, ANGLE, 90 DEG., CRES, .190 X .312 BOLT (S/S BY SAE-AS9594)
MS9595A NOT 1 BRACKET, ANGLE, 90 DEG., CRES, .190 X .375 BOLT (S/S BY SAE-AS9595)
MS9596B NOT 1 BRACKET, ANGLE, 90 DEG. STEEL .190 BOLT (S/S BY SAE-AS9596)
MS9597C NOT 1 BRACKET, ANGLE, 90 DEG., CADMIUM PLATED .190 X .250 BOLT (S/S BY SAE-AS9597)
MS9598C NOT 1 BRACKET, ANGLE, 90 DEG., CADMIUM PLATED, .190 X .312 BOLT (S/S BY SAE-AS9598)
MS9599C NOT 1 BRACKET, ANGLE, 90 DEG., CADMIUM PLATED .190 X .375 BOLT (S/S BY SAE-AS9599)
MS9600B NOT 1 BRACKET, ANGLE, 90 DEG., CRES, .190 BOLT (S/S BY SAE-AS9600)
MS9601B NOT 1 BRACKET, ANGLE, 90 DEG, CRES, .190 X .250 BOLT (S/S BY SAE-AS9601)
MS9602B NOT 1 BRACKET, ANGLE, 90 DEG., CRES .190 X .312 BOLT (S/S BY SAE-AS9602)
MS9603B NOT 1 BRACKET, ANGLE, 90 DEG., CRES .190 X .375 BOLT (S/S BY SAE-AS9603)
MS9825A NOT 2 CLAMP, LOOP CUSHIONED, JOGGLED, CORROSION RESISTING STEEL, .204 HOLE (S/S BY NAS1715)
MS9826A NOT 1 CLAMP, LOOP-CUSHIONED, JOGGLED, CORROSION RESISTING STEEL, .265 HOLE
NA0165 POST, ELECTRICAL-MECHANICAL EQUIPMENT, SWAGE TYPE, METRIC (NO S/S DOCUMENT)
NA0166ANDNA0167 INSERT, MOLDED-IN. CSK CLEARANCE HOLE, SANDWICH PANEL, AL ALLOY AND CRES, METRIC (NO S/S DOCUMENT)
NAS1786 POST, ELECTRICAL-MECHANICAL EQUIPMENT (SEE NAS1831, FOR DESCRIPTION OF STATUS NOTES, SEE NAS380)
NAS5573 CLAMP ASSEMBLY - ELECTRONIC EQUIPMENT (NO S/S DOCUMENT)
NAS816 CAP OR PLUG - PROTECTIVE, PLAIN TUBE OR HOLE (NO S/S DOCUMENT)
NAS819 CAP - PROTECTIVE, FLANGED FITTING (NO S/S DOCUMENT)
NASM14289 STRAP, RETAINING, CUSHIONED, RECTANGULAR, TWO-PIECE, METRIC (NO S/S DOCUMENT)
QPL-15877-20 HANGERS, PIPE (SPRING HANGERS AND SWAYBRACES, SHIPBOARD USE)
QPL-21565-7 NOT 1 CLAMP, LOOP, PLASTIC, WIRE SUPPORT (NO S/S DOCUMENT)
QPL-23460-19 NOT 1 PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (NO S/S DOCUMENT)
QPL-27536-6 NOT 1 COUPLING, CLAMP, GROOVED, V-BAND (NO S/S DOCUMENT)
QPL-4751-9 NOT 1 CASTER, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING (NO S/S DOCUMENT)
QPL-5432-5 NOT 1 INSULATOR, VIBRATION (NO S/S DOCUMENT)
QPL-6818-17 NOT 1 CLAMP, MOUNTING, AIRCRAFT INSTRUMENTS (NO S/S DOCUMENT)
QPL-6818-17 NOT 1 CLAMP, MOUNTING, AIRCRAFT INSTRUMENTS (NO S/S DOCUMENT)
QPL-7474-11 NOT 1 CASTERS, INDUSTRIAL (NO S/S DOCUMENT)
QPL-85449-2 NOT 1 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHION, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-85731-6 NOT 1 FASTNER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT (NO S/S DOCUMENT)
QPL-FF-P-001480-1 NOT 1 PADLOCK, KEY OPERATION (RESISTANT TO OPENING BY FORCE, PICK, & BYPASS TECHNIQUES (NO S/S DOCUMENT)
QPL-FF-P-110-3 NOT 1 PADLOCK, CHANGEABLE COMBINATION (RESISTANT TO OPENING BY MANIPULATION AND SURREPTITIOUS ATTACK)
SAE-AMS7245 INSERTS, THREAD FORM, CORROSION RESISTANT STEEL 18.5CR - 9.2NI (S/S BY SAE-AS7245)
SAE-AS4149 CLAMP, LOOP-CUSHIONED, INTEGRAL LOCK (NO S/S DOCUMENT)
SAE-AS4901 ROD END - THREADED, AIRCRAFT (NO S/S DOCUMENT)
W-A-450/2 NOT 1 COMPONENTS FOR INTERIOR ALARM SYSTEMS FOIL (NO S/S DOCUMENT)
W-A-450/3 NOT 1 COMPONENTS FOR INTERIOR ALARM SYSTEM BREAKWIRE (NO S/S DOCUMENT)
WW-H-171E(1) HANGERS & SUPPORTS, PIPE (FOR CIVIL AGENCIES S/S BY A-A-1192; FOR DOD S/S BY MSS-SP-58, MSS-SP-69, NFPA11, NFPA12, NFPA13, NFPA14, NFPA15, NFPA16 & NFPA17)
ZZ-C-730A CUPS & GLIDES, FURNITURE (S/S BY A-A-1194 & A-A-1196)
A-A-50432 铰链，对接（舰载/海洋） HINGE, BUTT (SHIPBOARD/MARINE)
A-A-52406A 钳，循环，消声器 CLAMP, LOOP, MUFFLER
A-A-52420 插头，扩展 PLUG, EXPANSION
A-A-52486 NOT 1 山，集装箱，适应力强：冲击和振动阻尼 MOUNT, SHIPPING CONTAINER, RESILIENT: SHOCK AND VIBRATION DAMPING
A-A-52493 NOT 1 杆端关节轴承，螺纹连杆，刚性 ROD END, THREADED-LINKAGE, RIGID
A-A-55586 铰链，对接狭窄，非模板 HINGE, BUTT-NARROW, NON-TEMPLATE
A-A-55587 NOT 2 铰链，对接，广泛，非模板 HINGE, BUTT, BROAD, NON-TEMPLATE
A-A-55588 NOT 2 铰链肩带（抵销） HINGE STRAP (OFFSET)
A-A-55589A 铰链，对接，连续（钢琴） 0.032厚度， 0.063针直径 HINGE, BUTT, CONTINUOUS (PIANO) .032 THICKNESS, .063 PIN DIA
A-A-55590A 铰链，对接，连续（钢琴） 0.040厚度， 0.091针直径 HINGE, BUTT, CONTINUOUS (PIANO) .040 THICKNESS, .091 PIN DIA
A-A-55591A 铰链，对接，连续（钢琴） 0.050厚度， 0.125针直径 HINGE, BUTT, CONTINUOUS (PIANO) .050 THICKNESS, .125 PIN DIA
A-A-55592A 铰链，对接，连续（钢琴） 0.060厚度， 0.125针直径 HINGE, BUTT, CONTINUOUS (PIANO) .060 THICKNESS, .125 PIN DIA
A-A-55593A 铰链，对接，连续（钢琴） 0.060厚度， 0.187针直径 HINGE, BUTT, CONTINUOUS (PIANO) .060 THICKNESS, .187 PIN DIA
A-A-55594A 铰链，对接，连续（钢琴） 0.075厚度， 0.187和0.250引脚直径 HINGE, BUTT, CONTINUOUS (PIANO) .075 THICKNESS, .187 AND .250 PIN DIA
A-A-55595A 铰链，对接，连续（钢琴） 0.090厚度， 0.250和0.375针直径 HINGE, BUTT, CONTINUOUS (PIANO) .090 THICKNESS, .250 AND .375 PIN DIA
A-A-55596A 铰链，对接，连续（钢琴） 0.125厚度， 0.375针直径 HINGE, BUTT, CONTINUOUS (PIANO) .125 THICKNESS, .375 PIN DIA
A-A-55614 NOT 2 盾，扩大（非钻井扩张主播） SHIELD, EXPANSION (NON-DRILLING EXPANSION ANCHORS)
A-A-55615 NOT 2 盾，扩大（木螺钉和螺栓滞后自我线程主播） SHIELD, EXPANSION (WOOD SCREW AND LAG BOLT SELF-THREADING ANCHORS)
A-A-55617B NOT 1 连铸机，工业，中等税 CASTER, INDUSTRIAL, MEDIUM DUTY
A-A-55618D 连铸机，旋转， kingpinless工业，重型拖车与应用 CASTER, SWIVEL, KINGPINLESS INDUSTRIAL, HEAVY DUTY WITH TOWING APPLICATION
A-A-55619B NOT 1 连铸机，工业，重型 CASTER, INDUSTRIAL, HEAVY DUTY
A-A-55620A 循环，幻灯片（装备） LOOPS, SLIDE (FOR EQUIPAGE)
A-A-59486A NOT 1 挂锁集（个别紧张或紧张都） PADLOCK SET (INDIVIDUALLY KEYED OR KEYED ALIKE)
A-A-59487A NOT 1 挂锁（主要经营） PADLOCK (KEY OPERATED)
ASME-B17.1 密码匙及keyseats KEYS AND KEYSEATS
ASTM-B418 阳极，演员和工作造成的电锌 ANODES, CAST AND WROUGHT GALVANIC ZINC
ASTM-F1145 turnbuckles ，锤造，焊接，伪造 TURNBUCKLES, SWAGED, WELDED, FORGED
ASTM-F1182 阳极，锌合金牺牲 ANODES, SACRIFICIAL ZINC ALLOY
ASTM-F2155 hasps和其他附件设备，挂锁或盖章，表现 HASPS AND OTHER ATTACHMENT DEVICES FOR PADLOCKS OR SEALS, PERFORMANCE OF
ASTM-F476 安全摆动门集会 SECURITY OF SWINGING DOOR ASSEMBLIES
ASTM-F708 烟斗的架子，僵化，设计和安装 PIPE HANGERS, RIGID, DESIGN AND INSTALLATION OF
ASTM-F883 挂锁，标准的性能规格 PADLOCKS, STANDARD PERFORMANCE SPECIFICATION FOR
BHMA-A156.1 butts和绞链 BUTTS AND HINGES
BHMA-A156.11 内阁锁，美国国家标准 CABINET LOCKS, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.12 相互关联的锁和锁存，美国国家标准 INTERCONNECTED LOCKS AND LATCHES, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.13 mortise锁＆锁存 MORTISE LOCKS & LATCHES
BHMA-A156.14 滑动和折叠门的硬件，美国国家标准 SLIDING AND FOLDING DOOR HARDWARE, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.15 更密切的持有人释放装置，美国国家标准 CLOSER HOLDER RELEASE DEVICES, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.16 硬件，辅助，标准 HARDWARE, AUXILIARY, STANDARD FOR
BHMA-A156.17 铰链＆支点，标准自我闭幕 HINGE & PIVOTS, STANDARD FOR SELF CLOSING
BHMA-A156.18 材料＆成品 MATERIAL & FINISHED
BHMA-A156.19 权力的协助和能耗低，权力运作的大门，美国国家标准 POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.2 锁和锁存，美国国家标准 LOCKS AND LATCHES, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.20 铰链和hasps ，肩带和发球， americal国家标准 HINGES AND HASPS, STRAP AND TEE, AMERICAL NATIONAL STANDARD FOR
BHMA-A156.21 阈值，标准 THRESHOLDS, STANDARD FOR
BHMA-A156.23 锁，电磁，美国国家标准 LOCKS, ELECTROMAGNETIC, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.24 锁，出口，延误，美国国家标准 LOCKS, EGRESS, DELAYED, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.3 设备，出口，美国国家标准 DEVICES, EXIT, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.4 门控制-终结，美国国家标准 DOOR CONTROLS - CLOSERS, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.5 锁，辅助，及相关产品，美国国家标准 LOCK, AUXILIARY, AND ASSOCIATED PRODUCTS, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.6 门装饰，建筑设计，美国国家标准 DOOR TRIM, ARCHITECTURAL, AMERICAN NATIONAL STANDARD FOR
BHMA-A156.7 模板铰链尺寸 TEMPLATE HINGE DIMENSIONS
BHMA-A156.8 车门控制- overheadholders ，标准 DOOR CONTROLS-OVERHEADHOLDERS, STANDARD FOR
BHMA-A156.9 机柜的硬件，标准 CABINETS HARDWARE, STANDARD FOR
FF-H-1687A 锁，办公室机器 LOCKS, OFFICE MACHINE
FF-L-2740A(1) 锁，组合 LOCKS, COMBINATION
FF-L-2890A 锁定延长（行人专用区的大门， deadbolt ） LOCK EXTENSION (PEDESTRIAN DOOR, DEADBOLT)
FF-L-2937(1) 组合锁，机械 COMBINATION LOCK, MECHANICAL
FF-P-110J(1) NOT 1 挂锁，多变的组合（耐开幕操纵和偷偷摸摸攻击） PADLOCK, CHANGEABLE COMBINATION (RESISTANT TO OPENING BY MANIPULATION AND SURREPTITIOUS ATTACK)
FF-P-2827A 挂锁，主要经营的，一般外勤人员 PADLOCK, KEY OPERATED, GENERAL FIELD SERVICE
FF-S-2738A(1) 海豹， antipilferage SEALS, ANTIPILFERAGE
MIL-A-18001K(2) 阳极，锌合金牺牲 ANODES, SACRIFICIAL ZINC ALLOY
MIL-A-19521B 阳极保留的支持插头及阳极的选用及安装设计标准为舰载冷凝器和换热器 ANODE RETAINING SUPPORT PLUGS AND ANODE SELECTION AND INSTALLATION DESIGN CRITERIA FOR SHIPBOARD CONDENSERS AND HEAT EXCHANGERS
MIL-C-6390B NOT 1 夹具和文书，飞机，安装 CLAMPS AND INSTRUMENTS, AIRCRAFT, INSTALLATION OF
A-A-1014A BELT, ABRASIVE (COATED CLOTH, POWER MACHINE) (S/S BY BHMA-B74.18)
A-A-1016C NOT 1 DISK, ABRASIVE (CLOTH & FIBRE) (S/S BYANSI/ BHMA-B74.18)
A-A-2697 DISC, ABRASIVE (PAPER) (S/S BY BHMA-B74.18)
A-A-3068/1 NOT 1 STONES, SHARPENING TYPE I - MOUNTED-IN-BOX CLASS B - NATURAL (NOVACULITE) STYLE 1 -RECTANGULAR (NO S/S DOCUMENT)
A-A-3068/10 NOT 1 STONES, SHARPENING TYPE VII - AX SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (NO S/S DOCUMENT)
A-A-3068/11 NOT 1 STONES, SHARPENING TYPE X - SH0EMAKER SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (NO S/S DOCUMENT)
A-A-3068/2 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS A - 1 - ARTIFICIAL (ALUMINUM OXIDE) (NO S/S DOCUMENT)
A-A-3068/3 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (NO S/S DOCUMENT)
A-A-3068/4 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS B - NATURAL (NOVACULITE) (NO S/S DOCUMENT)
A-A-3068/5 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES COMBINATION STONES (SEE TABLE I FOR CLASSES) STYLE 1 - RECTANGULAR (NO S/S DOCUMENT)
A-A-3068/6 NOT 1 STONES, SHARPENING TYPE III - TAPER ROUND STONES CLASS A-1 - ARTIFICIAL (ALUMINUM OXIDE) (NO S/S DOCUMENT)
A-A-3068/7 NOT 1 STONES, SHARPENING TYPE IV - SCYTHE STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (NO S/S DOCUMENT)
A-A-3068/8 NOT 1 STONES, SHARPENING TYPE V - KNIFE SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (NO S/S DOCUMENT)
A-A-3068/9 NOT 1 STONES, SHARPENING TYPE VI - GROOVED, SURGICAL AND DENTAL STONES CLASS B - NATURAL (NOVACULITE) (NO S/S DOCUMENT)
FED-STD-115B STONES, SHARPENING (S/S BY SS-S-736 AND SS-S-736/1 THROUGH SS-S-736/11)
GGG-D-00340A(1) DISK, ABRASIVE, ADHESIVE, AND HOLDER, FLEXIBLE
GGG-W-290C NOT 1 WHEELS, ABRASIVE, SNAGGING (S/S BY ANSI-B7.1, ANSI-B74.2, ANSI-B74.12 AND ANSI-B74.13)
MIL-B-81949 NOT 1 BRUSHES, FLAP, ROTARY, ABRASIVE, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
MIL-B-81949/1 NOT 1 BRUSHES, FLAP, ROTARY ABRASIVE (NO S/S DOCUMENT)
MIL-B-81949/2 NOT 1 BRUSH MANDREL, FLAP, ROTARY, ABRASIVE (NO S/S DOCUMENT)
MIL-S-17243D STONE, COMMUTATOR SURFACING (NO S/S DOCUMENT)
MIL-S-17346B(1) NOT 2 STONE, COMMUTATOR BURNISHING (FLEXIBLE ABRASIVE) (S/S BY A-A-58052)
MIL-S-17708C NOT 1 STONE, ELECTRICAL CONTACT BRUSH SEATER (NO S/S DOCUMENT)
MIL-S-2389 STONE, SHARPENING, POCKET (3 1/2 INCHES X 1 1-4 INCHES X 13/16 INCHES) (ARMY).
MIL-STD-165 WHEEL, ABRASIVE
MIL-W-15964A(1) WHEEL, ABRASIVE, AND HONES, HAND (DIAMOND IMPREGNATED)
MIL-W-81319A(1) NOT 3 WHEELS, ABRASIVE: NON-WOVEN NYLON, RESIN REINFORCED (S/S BY A-A-59292)
P-B-172B NOT 1 BELTS AND BANDS, ABRASIVE (COATED CLOTH, POWER MACHINE) (S/S BY A-A-1014)
P-D-455D NOT 1 DISKS, ABRASIVE, ALUMINUM-OXIDE (S/S BY A-A-1016)
P-D-455D(I1) NOT 1 DISKS, ABRASIVE, ALUMINUM-OXIDE (S/S BY A-A-1016)
SS-B-675B NOT 1 BRICK, RUBBING (NO S/S DOCUMENT)
SS-S-736/1 NOT 1 STONES, SHARPENING TYPE I - MOUNTED-IN-BOX CLASS B - NATURAL (NOVACULITE) STYLE 1 - RECTANGULAR (S/S BY A-A-3068/1)
SS-S-736/10 NOT 1 STONES, SHARPENING TYPE VII - AX SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (S/S BY A-A-3068/10)
SS-S-736/11 NOT 1 STONES, SHARPENING TYPE X - SHOEMAKER SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (S/S A-A-3068/11)
SS-S-736/2 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS A-1 - ARTIFICIAL (ALUMINUM OXIDE) (S/S BY A-A-3068/2)
SS-S-736/3 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (S/S BY A-A-3068/3)
SS-S-736/4 NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES CLASS B - NATURAL (NOVACULITE) (S/S BY A-A-3068/4)
SS-S-736/5A NOT 1 STONES, SHARPENING TYPE II - UNMOUNTED STONES COMBINATION STONES (SEE TABLE I FOR CLASSES) STYLE 1 - RECTANGULAR (S/S BY A-A-3068/5)
SS-S-736/6 NOT 1 STONES, SHARPENING TYPE III - TAPER ROUND STONES CLASS A-1 - ARTIFICIAL (ALUMINUM OXIDE) (S/S BY A-A-3068/6)
SS-S-736/7 NOT 1 STONES SHARPENING TYPE IV - SCYTHE STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (S/S BY A-A-3068/7)
SS-S-736/8 NOT 1 STONES, SHARPENING TYPE V - KNIFE SHARPENING STONES CLASS A-2 - ARTIFICIAL (SILICON CARBIDE) (S/S BY A-A-3068/8)
SS-S-736/9 NOT 1 STONES, SHARPENING TYPE VI - GROOVED, SURGICAL AND DENTAL STONES CLASS B -NATURAL (NOVACULITE) (S/S BY A-A-3068/9)
SS-S-736D NOT 1 STONES, SHARPENING (S/S BY A-A-3068)
A-A-58052 石料，换向器抛光（灵活的磨料） STONE, COMMUTATOR BURNISHING (FLEXIBLE ABRASIVE)
A-A-59292 砂轮，非织造布的尼龙，树脂钢筋 ABRASIVE WHEELS, NON-WOVEN NYLON, RESIN REINFORCED
MS91418C MOUNTS, VIBRATION, CUP-TYPE, CLASSES A & B, COARSE THREAD (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT)
A-A-1041B NOT 1 STEEL SHOT (S/S BY MIL-S-851)
A-A-1042B NOT 1 STEEL SHOT (S/S BY MIL-S-851)
A-A-1045B NOT 1 GRAIN, ABRASIVE (MINERAL) (NO S/S DOCUMENT)
A-A-1046 NOT 1 MAT, ABRASIVE (S/S BY MIL-A-9962)
A-A-1047A NOT 1 PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF (S/S BY ANSI-B74.18)
A-A-1048A NOT 1 COATED ABRASIVE CLOTH, ALUMINUM OXIDE (S/S BY ANSI-B74.18)
A-A-1049A NOT 1 CLOTH, ABRASIVE & PAPER, ABRASIVE (EMERY) (S/S BY ANSI-B74.18)
A-A-1197A NOT 1 RUBBING COMPOUND, LACQUER (NO S/S DOCUMENT)
A-A-1200A NOT 1 COATED ABRASIVE CLOTH, SILICON CARBIDE (S/S BY ANSI-B74.18)
A-A-1201A NOT 1 PAPER, ABRASIVE (GARNET COATED) (S/S BY ANSI-B74.18)
A-A-1202 NOT 1 COATED ABRASIVE PAPER, FLINT (S/S BY ANSI-B74.18)
A-A-1203B NOT 1 LAPPING AND GRINDING COMPOUND (VALVE) (S/S BY ANSI-B74.10 AND ANSI-B74.12)
A-A-1206A NOT 1 COATED ABRASIVE CLOTH, CROCUS (S/S BY ANSI-B74.18)
A-A-2667A NOT 1 SAND, SANDBLAST (NO S/S DOCUMENT)
FF-S-740A NOT 1 STEEL WOOL (S/S BY A-A-1043)
FF-W-1825A NOT 2 WOOL AND GAUZE, METALLIC (S/S BY A-A-1043)
FF-W-556(2) STEEL WOOL (S/S BY FF-S-740A)
GGG-C-520B(1) NOT 1 CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF (S/S BY ANSI-B74.18)
MIL-A-21380B(1) NOT 2 ABRASIVE MATERIALS, FOR BLASTING (S/S BY A-A-59316)
MIL-A-22936 ABRASIVE, GLASS BEADS (USE MIL-G-9954)
MIL-A-4864A NOT 1 ALUMINUM WOOL (S/S BY A-A-1043)
MIL-A-9962A(4) NOT 1 ABRASIVE MATS, NON-WOVEN, NON-METALLIC (S/S BY A-A-58054)
MIL-B-16909B NOT 2 BUFFING AND POLISHING COMPOUNDS (S/S BY A-A-59297)
MIL-C-10183 COMPOUND, RUBBING FOR LACQUERED SURFACES. ()SUPERSEDED BY TT-R-771.()
MIL-D-9914A(1) NOT 1 DIAMOND, INDUSTRIAL (NO S/S DOCUMENT)
MIL-G-5634C(3) NOT 1 GRAIN, ABRASIVE, SOFT, FOR CARBON REMOVAL (S/S BY A-A-1722)
MIL-L-17862C LAPPING AND GRINDING COMPOUND (FOR CHROMIUM-COBALT HARD-FACED SEATS AND DISKS) (USE SS-L-1682)
MIL-P-2909 PUMICE, GROUND (ABRASIVE PIGMENT)
MIL-P-3237 POLISHING ABRASIVE, RARE-EARTH OXIDE (FOR OPTICAL GLASS)
MIL-S-17726C NOT 3 SAND, SANDBLAST (NO S/S DOCUMENT, REFER TO MIL-A-22262 OR A-A-2667)
MIL-S-20643B SAND, LITHOGRAPHIC GRAINING (ALUMINUM OXIDE).
MIL-S-851D(1) NOT 3 STEEL GRIT, SHOT, AND CUT WIRE SHOT; AND IRON GRIT AND SHOT-BLAST CLEANING AND PEENING (S/S BY SAE-J1993, SAE-J827, SAE-J444, AND SAE-J441)
MIL-STD-852 NOT 2 GLASS BEAD PEENING PROCEDURES (NO S/S DOCUMENT)
P-C-1673A NOT 1 CLOTH, ABRASIVE, EMERY (S/S BY AA 1049)
P-C-451E COATED ABRASIVE, CLOTH, ALUMINUM OXIDE OR SILICON CARBIDE (S/S BY A-A-1048 AND A-A-1200)
P-C-458C NOT 1 CLOTH, ABRASIVE, CROCUS (S/S BY A-A-1206)
P-C-458C(I1) CLOTH, ABRASIVE, CROCUS (S/S BY A-A-1206)
P-P-101E(1) NOT 1 PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF (S/S BY A-A-1047)
P-P-105C PAPER, ABRASIVE, (FLINT) (S/S BY A-A-1202)
P-P-121D NOT 1 PAPER, ABRASIVE, GARNET (S/S BY A-A-1201)
P-P-126A(1) PAPER, ABRASIVE, GARNET, WATERPROOF (USE P-P-101C)
QPL-3237-2 POLISHING ABRASIVE, RARE&EARTH OXIDE (FOR OPTICAL GLASS)
QPL-9954-7 NOT 1 GLASS BEADS, FOR CLEANING AND PREENING (NO S/S DOCUMENT)
SS-C-614 COMPOUND, VALVE-GRINDING (USE SS-L-1682)
SS-L-1682 NOT 1 LAPPING AND GRINDING COMPOUND, VALVE (S/S BY A-A-1203)
SS-P-821C NOT 1 PUMICE; GROUND, ABRASIVE (NO S/S DOCUMENT)
SS-T-665 TRIPOLI, DENTAL
TT-R-771B(1) RUBBING COMPOUND (FOR LACQUERED SURFACES)
U-R-651/5 ROUGE STICKS, DENTAL
A-A-58054 研磨垫，非织造布，非金属 ABRASIVE MATS, NON-WOVEN, NON-METALLIC
A-A-59297 抛光和抛光化合物 BUFFING AND POLISHING COMPOUNDS
A-A-59316 NOT 1 磨料材料;爆破 ABRASIVE MATERIALS; FOR BLASTING
ANSI-B7.7 材料，研磨涂层磨料磨具系统，安全要求 MATERIALS, ABRADING WITH COATED ABRASIVES SYSTEMS, SAFETY REQUIREMENTS FOR
ANSI-B74.18 粮食，分级某些磨料，对涂衣磨料产品，规格 GRAIN, GRADING OF CERTAIN ABRASIVE, ON COATED ABRASIVE PRODUCTS, SPECIFICATIONS FOR
JAN-G-479 NOT 4 玻璃，地面（军械使用） GLASS, GROUND (FOR ORDNANCE USE)
MIL-A-22262B(2) 磨料爆破媒体船体喷射清洁 ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING
AN3219 REV 4 KNOB - POINTER, SMALL (S/S BY MS25165)
AN3220 REV 6 KNOB - POINTER (S/S BY MS25166)
DOD-K-85771/1 NOT 1 KNOBS, CONTROL, ROUND, ILLUMINATED AND NON-ILLUMINATED, METRIC (NO S/S DOCUMENT)
DOD-K-85771/2 NOT 1 KNOBS, CONTROL, TACTILE, ILLUMINATED AND NON-ILLUMINATED, METRIC (NO S/S DOCUMENT)
DOD-K-85771/3 NOT 1 KNOBS, CONTROL, POINTER, ILLUMINATED AND NON-ILLUMINATED, METRIC (NO S/S DOCUMENT)
DOD-K-85771/4 NOT 1 KNOBS, CONTROL, BALL, METRIC (NO S/S DOCUMENT)
MIL-D-28728/1B NOT 2 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.81 DIAMETER (S/S BY NASM28728-1)
MIL-D-28728/2B NOT 3 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.75 DIAMETER (S/S BY NASM28728/2)
MIL-D-28728/3A NOT 3 DIAL, CONTROL, MULTITURN COUNTERS 10-TURN COUNTER, CONCENTRIC (1.810-INCH DIAMETER) (S/S BY NASM28728/3)
MIL-D-28728/4B NOT 2 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.16 DIAMETER (S/S BY NASM28728/4)
MIL-D-28728/5B NOT 2 DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGITS (S/S BY NASM28728/5)
MIL-D-28728/6B NOT 2 DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGITS, ILLUMINATED AND NONILLUMINATED (S/S BY NASM28728/6)
MIL-D-28728/7 NOT 3 DIAL, CONTROL, MULTITURN COUNTERS 100-TURN COUNTERS, 4-DIGIT (S/S BY NASM28728/7)
MIL-D-28728/8B NOT 2 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, .88 DIAMETER (S/S BY NASM28728/8)
MIL-D-28728B NOT 2 DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR (S/S BY NASM28728)
MIL-K-25049C(1) SUP 1 NOT 2 KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (S/S BY NASM25049)
MIL-K-3926/1A NOT 2 KNOBS, CONTROL, BALL (S/S BY NASM3926-1)
MIL-K-3926/2A NOT 2 KNOBS, CONTROL, OVAL TAPERED (S/S BY NASM3926-2)
MIL-K-3926/3A NOT 2 KNOBS, CONTROL, TAPERED (S/S BY NASM3926-3)
MIL-K-3926/4 NOT 2 KNOBS, CONTROL, ROUND, EDGE LIGHTED AND NON-EDGE LIGHTED (S/S BY NASM3926-4)
MIL-K-3926B(2) SUP 1B NOT 3 KNOBS, CONTROL (FOR USE WITH ELECTRONIC, COMMUNICATIONS, AND ALLIED EQUIPMENT) (S/S BY NASM3926)
MIL-K-48213 NOT 1 KNOB, SETTING (NO S/S DOCUMENT)
MIL-STD-1348 NOT 1 KNOB, CONTROL SELECTION OF (NO S/S DOCUMENT)
MS15032A KNOB (SCREW, TYPE 1, 3/4-INCH FOR METALFURNITURE)
MS15033A KNOB (SCREW, TYPE 2, 1-1/4-INCH )FOR METAL FURNITURE(
MS21359A KNOBS CONTROL, ALUMINUM ALLOY (ROUND, CONCENTRIC, POINTER, SPINNER, SLOTTED, BAR, LOCKING SHAFT HOLE, AND KNOB LOCKS) (NO S/S DOCUMENT)
MS21360A KNOB-CONTROL, ALUMINUM ALLOY (ROUND, CONCENTRIC, POINTER, SPINNER, BAR, SLOTTED, ROUND SHAFT HOLE, AND KNOB LOCKS) (NO S/S DOCUMENT)
MS21361A KNOB CONTROL, ALUMINUM ALLOY (ROUND, CONCENTRIC, POINTER, SPINNER, BAR, LOCKING SHAFT HOLE, FIN, AND KNOB LOCKS) (NO S/S DOCUMENT)
MS21362A KNOB-CONTROL, ALUMINUM ALLOY (ROUND, CONCENTRIC, POINTER, SPINNER, FIN, BAR, ROUND SHAFT HOLE, AND KNOB LOCKS) (NO S/S DOCUMENT)
MS21382E NOT 2 KNOB-ROUND, ILLUMINATED AND NON-ILLUMINATED, SMALL (S/S BY NASM21382)
MS21383F NOT 2 KNOB RADIAL INDICATOR, ILLUMINATED AND NON ILLUMINATED (S/S BY NASM21383)
MS21384E NOT 2 KNOB ROUND, ILLUMINATED AND NON ILLUMINATED (S/S BY NASM21384)
MS21385E NOT 2 KNOB, TACTILE SERIES, ILLUMINATED AND NON-ILLUMINATED (S/S BY NASM21385)
MS21386E NOT 2 KNOB, ROUND, CONCENTRIC ILLUMINATED AND NON-ILLUMINATED (S/S BY NASM21386)
MS21387E NOT 2 KNOB ROUND, ILLUMINATED AND NON ILLUMINATED, SMALL (S/S BY NASM21387)
MS24227 KNOB, CONTROL BRAILLE, PLASTIC (ILLUMINATED)
MS24228 KNOB & CONTROL DIAL, PLASTIC
MS24229 KNOB & CONTROL, PLASTIC (ILLUMINATED)
MS24244 NOT 1 KNOB-CONTROL, BRAILLE, METAL (NO S/S DOCUMENT)
MS24246 ADAPTER, CONTROL KNOB
MS24247A SHAFT - CONTROL KNOB (USE MS33742)ASG()
MS24251 KNOB&CONTROL, QUICK DISCONNECT
MS25164E NOT 1 SKIRT, CONTROL KNOB (ASG)
MS25165E NOT 1 KNOB, POINTER, ILLUMINATED, SMALL (ASG)
MS25166E NOT 1 KNOB, POINTER, ILLUMINATED
MS25167F NOT 1 KNOB, ROUND, SMALL (ASG)
MS25168F NOT 1 KNOB, ROUND (ASG)
MS25169G NOT 1 KNOB, BAR, SMALL (ASG)
MS33501 KNOB, CONTROL, POWER (THROTTLE) - STANDARD SHAPE FOR (USE MS 26517)
MS33502 KNOB, CONTROL, FUEL SELECTOR-STANDARD SHAPE FOR
MS33503 KNOB, CONTROL, RPM - STANDARD SHAPE FOR (USE MS 26518)
MS33504 KNOB, CONTROL, MIXTURE - STANDARD SHAPEFOR (USE MS 26519)
MS33505 KNOB, CONTROL, SUPERCHARGER - STANDARD SHAPE FOR (USE MS 26520)
MS33506 KNOB, CONTROL, LANDING GEAR - STANDARD SHAPE FOR (S/S BY MS 26521)
MS33507 KNOB, CONTROL, LANDING FLAP - STANDARD SHAPE FOR (USE MS 26522)
MS33517 KNOB, CONTROL, FIRE EXTINGUISHER - STANDARD SHAPE FOR (USE MS 26523)
MS33518 KNOB, LANDING LIGHT SWITCH - STANDARD SHAPE FOR
MS33519 KNOB, CARBURETOR AIR CONTROL - STANDARD SHAPE FOR (MS 26524)
MS33742A NOT 2 SHAFTS, CONTROL KNOB
MS33743A NOT 2 HOLES, CONTROL KNOB SHAFT
MS90120C NOT 2 KNOBS, CONTROL, BAR, PLASTIC (S/S BY NASM90120)
MS91522A NOT 2 KNOB, CONTROL, CRANK, METAL (S/S BY NASM91522)
MS91523B NOT 3 KNOB, CONTROL, LEVER, METAL (S/S BY NASM91523)
MS91524E NOT 2 KNOBS CONTROL, SHORT BAR, METAL AND PLASTIC (S/S BY NASM91524)
MS91525F NOT 2 KNOBS, CONTROL, BAR, METAL AND PLASTIC (S/S BY NASM91525)
MS91528J NOT 3 KNOBS-CONTROL, PLASTIC (ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS) (S/S BY NASM91528)
MS91531E NOT 3 KNOBS, CONTROL, ROUND, PLASTIC (WITH FLUTED GRIP) (S/S BY NASM91531)
MS9227A NOT 1 ADAPTER-CONTROL LEVER CONNECTION
QPL-25049-9(1) NOT 1 KNOB, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
QPL-3926-11(5) NOT 2 KNOBS, CONTROL (FOR USE WITH ELECTRONIC, COMMUNICATIONS, AND ALLIED EQUIPMENT) (NO S/S DOCUMENT)
MIL-S-13572C(1) NOT 2 SPRINGS, HELICAL, COMPRESSION AND EXTENSION (S/S BY SAE-AS13572)
MIL-S-20561A NOT 2 SPRING, ESCAPEMENT, CORROSION-RESISTING
MIL-S-82684(1) NOT 1 SPRING, HELICAL TORSION
MS24585D NOT 3 SPRING, HELICAL, COMPRESSION, FOR LOADS BELOW 20 POUNDS (S/S BY SAE-AS24585)
MS24586E(2) NOT 1 SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS (S/S BY SAE-AS24586)
ASTM-A125 钢弹簧，螺旋，热处理 STEEL SPRINGS, HELICAL, HEAT-TREATED
MIL-DTL-23192E 弹簧，螺旋，年龄硬化镍铬铁合金（ uns n07750 ） SPRINGS, HELICAL, AGE-HARDENABLE NICKEL-CHROMIUM-IRON ALLOY (UNS N07750)
A-A-52153 PLUG, MACHINE THREAD, MAGNETIC: DRAIN (NO S/S DOCUMENT)
A-A-59558 NOT 1 RING, LOCK, SERRATED (SEE NOTICE 1 FOR REPLACEMENT INFORMATION)
DOD-S-63544 NOT 2 SHIM, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
DOD-S-63544/1 NOT 2 SHIM, CRES, METRIC (NO S/S DOCUMENT)
DOD-S-70328 NOT 2 SPACER, RING, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
DOD-S-70328/1 NOT 2 SPACER, RING, METRIC (NO S/S DOCUMENT)
MIL-R-2327F(1) NOT 1 RING, CONNECTING, ROUND (NO S/S DOCUMENT)
MIL-R-3390F NOT 3 RINGS, DEE
MIL-S-70334 NOT 1 SHIM, SOLID (NO S/S DOCUMENT)
MIL-S-70334/1 NOT 2 SHIM, SOLID, ROUND (S/S BY A-A-59561)
MIL-S-70344 NOT 1 SHIM, LAMINATED, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
MIL-S-70344/1 NOT 1 SHIM, LAMINATED, ROUND, CLASS 1 (.002) LAMINATES (NO S/S DOCUMENT)
MIL-S-70344/2 NOT 1 SHIM, LAMINATED, ROUND, CLASS 2 (.003) LAMINATES (NO S/S DOCUMENT)
MIL-S-85069/1A NOT 3 SLEEVES, FASTENER, GROOVED, RELIABILITY AND MAINTAINABILITY (REPAIR AND MAINTENANCE) REQUIREMENTS FOR
MIL-STD-1756 NOT 1 RING, RETAINING, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
MS25086C NOT 1 RING, RETAINING
MS35844D NOT 4 PLUG, MACHINE THREAD, MAGNETIC: DRAIN
MS51840C NOT 3 PLUG, MACHINE THREAD, O-RING
MS51925B NOT 1 RING, DEE-MEDIUM (S/S BY A-A-59557)
MS51990B(3) NOT 1 RING, LOCK, SERRATED (S/S BY A-A-59558)
MS51997C(2) NOT 3 RING, LOCK, SERRATED-HIGH STRENGTH (S/S BY SAE-AS51997)
MS9015B PLUG, MACHINE THREADED - "O" RING SEAL

〉〉〉〉〉〉点击索取〈〈〈〈〈〈

MIL分类索引 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183

版权所有：北京中普科标图书有限责任公司
电话(Tel)：010-87410870/86481849 传真(Fax)：010-61272284
E-mail：gwbz@263.net MSN:bxkj@hotmail.com
QQ：543060174 | 327814406
工作时间:星期一 ~ 星期六.早8:30至晚5:30点