|
被动防火材料的抗喷火的测定.第1部分:一般要求
Determination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
参考页数：40P.;A4
|
|
|
|
|
|
致密定型耐火制品的分类.第2部分:含残留碳小于7%的碱性制品.技术勘误1
Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon; Technical Corrigendum 1
参考页数：2P.;A4
|
|
|
|
|
|
耐火材料.导热性测定.第2部分:热线法(并联)
Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire method (parallel)
参考页数：13P.;A4
|
|
|
|
|
|
致密成型耐熔制品的试验方法.环境温度下抗磨性的测定
Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
参考页数：10P;A4
|
|
|
|
|
|
包含氧化铝、氧化锆和硅石的耐火材料的化学分析.包含5%～45%ZrO<指数2>的耐火材料(可选择X射线荧光法).第2部分:湿化学分析
Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
参考页数：18P;A4
|
|
|
|
|
|
耐火制品中氧化硼(III)的测定.第2部分:用酸提取法测定粘合物中的氧化硼(III)
Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
参考页数：10P;A4
|
|
|
|
|
|
耐火产品的试验方法.第1部分:使用振动脉冲激励测定动态杨氏模量(MOE)
Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
参考页数：11P;A4
|
|
|
|
|
|
耐熔灰浆.第3部分:连接稳定性的测定
Refractory mortars - Part 3: Determination of joint stability
参考页数：3P.;A4
|
|
|
|
|
|
耐熔灰浆.第4部分:挠曲粘接强度的测定
Refractory mortars - Part 4: Determination of flexural bonding strength
参考页数：5P.;A4
|
|
|
|
|
|
耐熔灰浆.第5部分:粒度分布的测定(筛析法)
Refractory mortars - Part 5: Determination of grain size distribution (sieve analysis)
参考页数：5P.;A4
|
|
|
|
|
