|
锥度C=1:3至1:500及长度6至630mm的锥形工件的圆锥公差与配合体系.轴向位移
System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; axial displacements
参考页数：5P.;A4
|
|
|
|
|
|
锥度C=1:3至1=500及长度6至630mm的锥形工件的圆锥公差与配合体系.圆锥偏差对圆锥配合的影响
System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; effect of the deviations on cone with regard to the cone fit
参考页数：4P.;A4
|
|
|
|
|
|
航空航天.飞机结构的ISO配合(滚柱轴承的安装除外)
Aerospace; ISO-fits for airframe construction (except mounting of roller bearings)
参考页数：5P.;A4
|
|
|
|
|
|
锥形工件C=1:3至1:500及长度6至630mm的圆锥公差与配合体系.圆锥公差体系
System of cone tolerances and cone fits for conical workpieces from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone tolerances
参考页数：10P.;A4
|
|
|
|
|
|
锥度C=1:3至1:500及长度为6至630mm的锥形工件的圆锥公差与配合体系.德语、英语、法语、意大利语、俄语及西班牙语的词汇
System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; vocabulary in German, English, French, Italian, Russian, Spanish
参考页数：7P.;A4
|
|
|
|
|
|
航空航天.发动机结构的ISO配合(滚柱轴承的安装除外)
Aerospace; ISO-fits for engine construction (except mounting of roller bearings)
参考页数：6P.;A4
|
|
|
|
|
|
规格范围在 3150 mm - 10.000 mm 以上的公差和极限偏差.原则、标准公差和极限偏差
Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
参考页数：6P.;A4
|
|
|
|
|
|
锥形工件C=1:3至1:500及长度6至630mm的圆锥公差与配合体系.内外圆锥的检验方法
System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lenghts from 6 to 630 mm; methods for testing of internal and external cones
参考页数：15P.;A4
|
|
|
|
|
|
推荐配合的选择.公差带、容差、配合公差
Recommended Selection of Fits; Tolerance Zones, Allowances, Fit Tolerances
参考页数：5P.;A4
|
|
|
|
|
|
基孔制ＩＳＯ配合.配合公差（间隙和过盈）
ISO-fits for the hole basic system; tolerances of fit (clearances and interferences)
参考页数：2P.;A4
|
|
|
|
|
