|
自由行程型钢丝螺纹插件.ISO公制细牙螺纹规格
Free running type wire thread inserts - Specification for ISO metric fine pitch threads
参考页数：16P.;A4
|
|
|
|
|
|
ISO普通米制螺纹.公差.第3部分:结构螺纹的偏差
ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads
参考页数：22P.;A4
|
|
|
|
|
|
ISO普通米制螺纹.公差.第4部分:与镀锌后公差带位置为H或G攻出的内螺纹相匹配的热浸镀锌外螺纹的尺寸极限
ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
参考页数：10P.;A4
|
|
|
|
|
|
ISO公制梯形螺纹. 公差
ISO metric trapezoidal screw threads. Tolerances
参考页数：26P.;A4
|
|
|
|
|
|
ISO公制梯形螺纹. 总平面图
ISO metric trapezoidal screw threads. General plan
参考页数：14P.;A4
|
|
|
|
|
|
ISO公制梯形螺纹. 基本和设计轮廓
ISO metric trapezoidal screw threads. Basic and design profiles
参考页数：16P.;A4
|
|
|
|
|
|
ISO普通米制螺纹. 公差.第5部分:与镀锌前公差带位置为H最大尺寸的热浸镀锌外螺纹相匹配的内螺纹的极限尺寸
ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
参考页数：10P.;A4
|
|
|
|
|
|
ISO普通米制螺纹.公差.第2部分:普通外螺纹和内螺纹的极限尺寸.中等质量
ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality
参考页数：10P.;A4
|
|
|
|
|
|
自由行程型钢丝螺纹插件.ISO米制粗螺距螺纹用规范
Free running type wire thread inserts - Specification for ISO metric coarse pitch threads
参考页数：18P.;A4
|
|
|
|
|
|
螺纹镶齿金属丝锥孔攻丝规范(ISO米制螺纹)
Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
参考页数：38P.;A4
|
|
|
|
|
