|
气压传动.最高工作压力为10 bar、16 bar和25 bar(1 MPa、1.6 MPa和2.5 MPa)圆柱形快速接头.插头连接尺寸、规范、应用指南和试验
Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 MPa and 2,5 MPa) - Plug connecting dimensions, specifications, application guidelines and testing.
参考页数：17P.;A4
|
|
|
|
|
|
液压传动.25MPa和40MPa(250 bar和400 bar)压力下使用的四用螺钉整体方法兰连接件
Hydraulic fluid power - Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar).
参考页数：17P.;A4
|
|
|
|
|
|
液压流体动力.在20MPa(200巴)至31,5MPa(315巴)压力下使用的平面型快速装拆的耦合器.规范
Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications.
参考页数：9P.;A4
|
|
|
|
|
|
橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)
Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).
参考页数：9P.;A4
|
|
|
|
|
|
道路车辆.气闸系统用热塑管材.第1部分:尺寸和标记
Road vehicles. Thermoplastics tube for air braking systems. Part 1 : dimensions and marking.
参考页数：4P.;A4
|
|
|
|
|
|
道路车辆.气闸系统用热塑管材.第2部分:车辆上安装、试验方法和要求
Road vehicles. Thermoplastics tube for air braking systems. Part 2 : mounting on vehicle, test methods and requirements.
参考页数：22P.;A4
|
|
|
|
|
|
气压传动.连接.气口和螺柱端
Pneumatic fluid power - Connections - Ports and stud ends.
参考页数：19P.;A4
|
|
|
|
|
|
气压传动.热塑管道用推入式连接器
Pneumatic fluid power - Push-in connectors for thermoplastic tubes.
参考页数：28P.;A4
|
|
|
|
|
|
流体动力和一般用途的连接件.诊断用途的液压耦合器.第1部分:非压力下的耦合连接
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1 : coupling not for connection under pressure.
参考页数：8P.;A4
|
|
|
|
|
|
液压动力.快速装拆的耦合器.第2部分:试验方法
Hydraulic fluid power - Quick-action couplings - Part 2 : test methods.
参考页数：29P.;A4
|
|
|
|
|
