|
气动减压阀和过滤减压阀.第2部分:评定商务文件中应包含的主要特性的测试方法
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
参考页数：35P.;A4
|
|
|
|
|
|
气动减压阀和过滤减压阀.第1部分:商务文件中应包含的主要特性和产品标识要求
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
参考页数：12P.;A4
|
|
|
|
|
|
气压传动.五气口方向控制阀,规格18mm和26mm.第2部分:可任选连接器的安装接口
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector
参考页数：9P.;A4
|
|
|
|
|
|
液压传动.四油口叠加阀和四油口方向控制阀02、03、05、07、08和10规格.夹紧尺寸规格
Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 - Clamping dimensions
参考页数：4P;A4
|
|
|
|
|
|
液压传动.二口,三口和四口螺旋式插装阀.带有ISO 725(UN和UNF)标准螺纹插线孔
Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities with ISO 725 (UN and UNF) threads
参考页数：20P;A4
|
|
|
|
|
|
液压传动.补偿式流量控制阀.装配面
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
参考页数：28P;A4
|
|
|
|
|
|
气体阀门
Gas valves
参考页数：76P;A4
|
|
|
|
|
|
液压传动 油路块总成及其元件的标识
参考页数：10
|
|
|
|
|
|
气动流体动力.速度控制阀
Pneumatic fluid power -- Speed control valves
参考页数：8P;A4
|
|
|
|
|
|
液压传动.二油口盖板式插装阀.插装孔(ISO 7368-2016)
Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016)
参考页数：41P.;A4
|
|
|
|
|
