|
测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-2部分:详细要求.用于低压分布系统的移动式试验、测量和监测设备用试验配置、操作条件和性能标准
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
参考页数：17P;A4
|
|
|
|
|
|
测量、控制和实验室用电气设备.电磁兼容性要求.第2-4部分:详细要求.按照IEC 61557-9标准的绝缘失效定位设备和IEC 61557-8的绝缘监测设备用试验配置、操作条件和性能标准
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
参考页数：29P;A4
|
|
|
|
|
|
测量、控制和实验室用电气设备.电磁兼容性要求.第2-3部分:详细要求.有综合或遥感信号作用的传感器的试验结构,操作条件和性能标准
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
参考页数：44P;A4
|
|
|
|
|
|
测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第1部分:通用要求
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
参考页数：41P;A4
|
|
|
|
|
|
测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-1部分:详细要求.用于电磁兼容性无保护设施的感光试验和测量设备的试验配置、操作条件和性能标准
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
参考页数：16P;A4
|
|
|
|
|
|
金属通信电缆的试验方法.第4-11部分:电磁兼容性(EMC).修补导线同轴电缆组件和预先连接电缆的耦合衰减或屏蔽衰减.吸收钳法
Metallic communication cable test methods - Part 4-11: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of patched cords, coaxial cable assemblies, pre-connectorised cables - Absorbing clamp method
参考页数：14P;A4
|
|
|
|
|
|
金属通信电缆的shiyan 方法.第4-12部分:电磁兼容性(EMC).连接硬件的耦合衰减或屏蔽衰减.吸收钳法
Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method
参考页数：13P;A4
|
|
|
|
|
|
电力变压器、反应器、供电机组及其它们的组合.电磁兼容性(EMC)要求
Safety of transformers, reactors, power supply units and combinations therof - EMC requirements
参考页数：42P.;A4
|
|
|
|
|
|
金属通信电缆试验方法.第4-13部分:电磁兼容性(EMC).链接和频道(实验室条件)的耦合衰减.吸收钳法
Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method
参考页数：15P;A4
|
|
|
|
|
|
测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-5部分:详细要求.依据IEC 61784-1标准的带接口现场设备用试验配置、操作条件和性能标准
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
参考页数：33P;A4
|
|
|
|
|
