|
非承压地下排水和污水用塑料管道系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.第1部分:管道、配件和系统材料的规范和性能标准
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria for pipes, fittings and system
参考页数：18P.;A4
|
|
|
|
|
|
建筑物内污水废水排放用塑料管道系统(低温和高温).热塑塑料.推荐的安装规范
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
参考页数：42P.;A4
|
|
|
|
|
|
无压力地下排水和排污塑料管道系统.聚丙烯(PP)
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
参考页数：26P.;A4
|
|
|
|
|
|
建筑物内污废水排放系统用硬聚氯乙烯(PVC-U)塑料管道系统(低温和高温)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
参考页数：30P;A4
|
|
|
|
|
|
建筑物内土壤和废物排放(低温和高温)用塑料管道系统.苯乙烯共聚物混合料(SAN + PVC)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
参考页数：32P.;A4
|
|
|
|
|
|
建筑物内污、废水排放(低温和高温)用塑料管道系统.聚乙烯(PE)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
参考页数：24P.;A4
|
|
|
|
|
|
建筑物内污、废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯(ABS)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
参考页数：30P.;A4
|
|
|
|
|
|
建筑物内排水管网系统用塑料存水弯
Plastics traps for discharge pipework systems inside buildings
参考页数：33P.;A4
|
|
|
|
|
|
弹性密封件.灌溉和排水设施用管接头密封件材料的要求.弹性塑料
Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
参考页数：11P.;A4
|
|
|
|
|
|
无压排水和污水塑料管系统. 基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP)制成的非圆形管和接头. 尺寸, 要求和试验
Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests
参考页数：25P.;A4
|
|
|
|
|
