|
ISO米制螺纹公差为4H~8H和4G~6G的粗牙与细牙的磨牙丝锥 螺纹部分的制造公差 修改2
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 2
参考页数:1P.;A4
|
|
|
|
|
|
ISO米制螺纹公差为4H-8H和4G-6G的粗牙与细牙的磨牙丝锥.螺纹部分的制造公差.修改件1
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 1
参考页数:4P.;A4
|
|
|
|
|
|
公称直径从M3~M24和1/8英寸~1英寸的长柄机用丝锥-缩柄丝锥
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps
参考页数:7P.;A4
|
|
|
|
|
|
使用前先攻螺纹用钻头
Drills for use prior to tapping screw threads
参考页数:5P.;A4
|
|
|
|
|
|
管螺纹G系列和Rp系列用的磨牙丝锥 螺纹部分的公差 技术勘误1
Ground thread taps for pipe threads G series and Rp series; tolerances on the threaded portion; technical corrigendum 1
参考页数:1P.;A4
|
|
|
|
|
|
ISO米制螺纹公差为4H~8H和4G~6G的粗牙与细牙的磨牙丝锥 螺纹部分的制造公差 技术勘误1
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; technical corrigendum 1
参考页数:1P.;A4
|
|
|
|
|
|
机用短丝锥和手用丝锥
Short machine taps and hand taps
参考页数:26P.;A4
|
|
|
|
|
|
圆柱管螺纹的手动和机动圆板牙.G系列
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
参考页数:4P.;A4
|
|
|
|
|
|
锥管螺纹的手动和机动圆板牙.R系列
Hand- and machine-operated circular screwing dies for taper pipe threads - R series
参考页数:4P.;A4
|
|
|
|
|
|
公称直径从M3~M10的长柄丝锥.带凹槽的直径柄丝锥
Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
参考页数:4P.;A4
|
|
|
|
|