|
实验室容量仪器校准的标准方法
Standard Practice for Calibration of Laboratory Volumetric Apparatus
参考页数:8P.;A4
|
|
|
|
|
|
用利普金双毛细管比重计测定粘性材料密度和相对密度(比重)的标准试验方法
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
参考页数:6P.;A4
|
|
|
|
|
|
在较大温度和压力范围内校正U形管密度细胞的标准实施规程
Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
参考页数:7P.;A4
|
|
|
|
|
|
测量试验方法B212, B329和B417使用表观密度杯容量的标准试验方法
Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
参考页数:3P.;A4
|
|
|
|
|
|
产品几何技术规范(GPS).表面纹理:表面.第3部分:操作者规范
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators
参考页数:18P;A4
|
|
|
|
|
|
产品的几何技术规范(GPS).表面纹理:表面的.第2部分:术语,定义和表面纹理参数
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
参考页数:47P;A4
|
|
|
|
|
|
产品几何形状规范(GPS).坐标测量仪(CMM).测量结果不确定性测定法.第3部分:校准工件的使用或测量标准
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
参考页数:18P;A4
|
|
|
|
|
|
产品几何量技术规范(GPS).坐标测量机(CMM)的验收和重新验证试验.第7部分:配备成像探测系统的CMMs
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
参考页数:39P;A4
|
|
|
|
|
|
几何产品规范(GPS).工件和测量设备的测量检查.第2部分:几何产品规范测量中,测量设备校准中以及产品检验中不确定度评价指南
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
参考页数:78P.;A4
|
|
|
|
|
|
产品的几何技术规范(GPS).表面纹理:表面的.第6部分:表面纹理测量方法的分类
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
参考页数:18P.;A4
|
|
|
|
|