|
粉末锻 (PF) 钢部件中表面指状氧化物穿透深度和粒子间氧化物网状组织出现的标准试验方法
Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
参考页数:5P.;A4
|
|
|
|
|
|
采用Carney漏斗测定金属粉末流动率的标准试验方法
Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
参考页数:3P.;A4
|
|
|
|
|
|
单轴压缩中金属粉末的可压缩性的标准试验方法
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
参考页数:4P.;A4
|
|
|
|
|
|
粉末冶金 (PM) 测试样品生产和制备的标准实践规程惯例
Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
参考页数:16P.;A4
|
|
|
|
|
|
粉末冶金 (PM) 承重和结构材料的径向压溃强度K的标准试验方法
Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
参考页数:4P.;A4
|
|
|
|
|
|
硬质合金表观孔隙率的标准试验方法
Standard Test Method for Apparent Porosity in Cemented Carbides
参考页数:3P.;A4
|
|
|
|
|
|
不包括硬质金属的烧结金属材料.碳含量测定用化学分析样品的制备
Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
参考页数:3P;A4
|
|
|
|
|
|
金属粉末 用还原法测定氧含量 第1部分:总则
Metallic powders; determination of oxygen content by reduction methods; part 1: general guidelines
参考页数:3P;A4
|
|
|
|
|
|
金属粉末 在稳态流动条件下粉末层的透气性试验外层表面区域的测定
Metallic powder; determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
参考页数:16P.;A4
|
|
|
|
|
|
硬质合金.铅和镉含量的测定
Hardmetals - Determination of lead and cadmium content
参考页数:14P.;A4
|
|
|
|
|