1

ANSI Z540.3 6th Edition, 2013

REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
Includes all amendments and changes through Reaffirmation Notice , 2013

2

SAE AMS2750 Revision E, July 1, 2012

(R) Pyrometry

3

API SPEC 6D CHINESE 24th Edition, February 2015

Specification for Pipeline Valves
Includes all amendments and changes through Addendum 1, March 2015

4

API SPEC 20B 1st Edition, April 2013

Open Die Shaped Forgings for Use in the Petroleum and Natural Gas Industry
Includes all amendments and changes through Errata , December 2013

5

API STD 20H 1st Edition, October 1, 2015

Heat Treatment Services-Batch Type for Equipment Used in the Petroleum and Natural Gas Industry

6

ASTM A182/A182M 2016 Edition, May 1, 2016

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

7

ASTM E220 2013 Edition, November 1, 2013

Standard Test Method for Calibration of Thermocouples By Comparison Techniques

8

ASTM E207 8th Edition, May 1, 2008

Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
Includes all amendments and changes through Editorial Change 1, June 2015

9

API STD 20C 2nd Edition, November 1, 2015

Closed Die Forgings for Use in the Petroleum and Natural Gas Industry

10

ASTM E317 2011 Edition, August 1, 2011

Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

11

ASTM E428 2008 Edition, July 1, 2008

Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
Includes all amendments and changes through Reapproval Notice , 2013

12

ASTM E114 2015 Edition, December 1, 2015

Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

13

ASTM E1001 2011 Edition, August 1, 2011代替ASTM E214

Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

14

ASTM A609/A609M 2012 Edition, May 1, 2012

Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

15

ASME BPVC-V 2015 Edition, 2015

SECTION V - NONDESTRUCTIVE EXAMINATION
Includes all amendments and changes through Errata , September 30, 2015